Search Results

Search found 17625 results on 705 pages for 'techno log'.

Page 543/705 | < Previous Page | 539 540 541 542 543 544 545 546 547 548 549 550  | Next Page >

• Wifi Drops Connections with WPA2-PSK

  - by graf_ignotiev

  I run a small computer lab made up of 10 computers of identical hardware and software (Dell Latitudes with Windows 7 x64 Enterprise) and I use a ZyWALL 2WG as a router/firewall. Nine of the computers connect to the router over wifi using WPA2-PSK encryption while the last one is connected by ethernet cable. I'm having a problem where any computer connected to the wi-fi occasionally drops off the network (it cannot be pinged and the client cannot ping the gateway). It only happens on the wifi side and only when the encryption is WPA2-PSK or WPA-PSK. I tried using another router with a different make and model and had no problems. Thinking it could be a software error, I reset the router to factory defaults and installed the newest firmware (V4.04(AQI.8) | 04/09/2010), but still have the problem. The 802.1X log gives the following error User logout because of user disassociation. with this note WPA2-PSK:00242c582ece:logout where 00242c582ece is the mac address of the device. At this point I'm out of things to try and leads to follow. It looks like this user had the same or similar problem, but none of those proposed solutions work for me.

  Read the article

• Azure can't ping or telnet VM from client

  - by Raif

  I have a VM on Azure with an instance sqlserver 2012 running on it. From my work computer and my home computer I can't get sqlserver management studio connect to it. I have looked at ALL the settings recommended in numerous articles. everything is setup correctly. endpoint 1433 Private and public sqlserver tcp enabled. sqlserver tcp listening on right port sqlserver using mixed auth windows fire wall, holes poked and then disabled on both client and VM can log in from VM using the credentials that I'm trying to use remotely further more I can't ping the dns or ip or tellnet address from my local machines. I can however hit the iis from a browser using the ip. strange. CS asked me to download MS Network Monitor, which I did and pinged and telneted. I have the results saved but can't really make heads or tails of them. CS hasn't responded yet. I can post some info here that would help. EDIT Never one to shrink from a challenge, I deleted my VM and re-did everything. Now it works although my confidence azure is somewhat shaken.

  Read the article

• Crash and Centos

  - by Jackob

  Hello guys and girls, I've a big problem it's the second time that my server crashed. I tried to check every thing and seems correct except this /var/log/messages: May 25 20:16:11 srv1 kernel: swap_free: Bad swap offset entry 00300000 May 25 20:16:33 srv1 kernel: swap_free: Unused swap offset entry 00080000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00340000 May 25 20:16:33 srv1 kernel: swap_free: Unused swap offset entry 000c0000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00a00000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00200000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00890000 May 25 20:16:33 srv1 kernel: swap_free: Unused swap offset entry 00080000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00f00000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00f90000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00980000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00980000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00820000 May 25 20:16:33 srv1 kernel: swap_free: Unused swap offset entry 000d0000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00a60000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00a20000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 009a0000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00170000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00f20000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00b60000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00a30000 May 25 20:16:33 srv1 kernel: swap_free: Bad swap offset entry 00320000 May 25 20:16:47 srv1 kernel: swap_free: Bad swap offset entry 002c0000 May 25 20:16:47 srv1 kernel: Eeek! page_mapcount(page) went negative! (-1) What can be my problem? Thanks so much!

  Read the article

• How to verify PostgreSQL 9 has installed correctly on a CentOS server?

  - by A4J

  I'm trying to install the PG (postgres) gem on a CentoOS server, but it keeps saying Postgres is too old, even though I have upgraded it to 9.1.3 (as per the instructions here http://www.davidghedini.com/pg/entry/install_postgresql_9_on_centos). I am using CentOS 5.8 (and Ruby 1.9.3) Here is the error message: Building native extensions. This could take a while... ERROR: Error installing pg: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb checking for pg_config... yes Using config values from /usr/bin/pg_config checking for libpq-fe.h... yes checking for libpq/libpq-fs.h... yes checking for pg_config_manual.h... yes checking for PQconnectdb() in -lpq... yes checking for PQconnectionUsedPassword()... no Your PostgreSQL is too old. Either install an older version of this gem or upgrade your database. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. psql --version confirms my version: psql (PostgreSQL) 9.1.3 I can confirm packages installed: Setting up Install Process Package postgresql91-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-devel-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-server-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-libs-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-contrib-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Nothing to do Any ideas on how to troubleshoot this? Thanks in advance.

  Read the article

• Cacti not working for SNMP data sources

  - by lorenzo-s

  I installed packages cacti and snmpd on a Debian server. I'm able to display common graphs in Cacti (such as memory usage, load average, logged in users, etc) using the data templates listed as Unix. Now I want to replace these graphs with new ones using SNMP data sources, because I see there is also CPU usage and because it's not excluded I have to manage multiple hosts in the future. So, I installed snmpd on the machine and left the snmpd.conf as it is. In Cacti, I created three new data sources from SNMP templates for 127.0.0.1 host: ucd/net - CPU Usage - Nice ucd/net - CPU Usage - System ucd/net - CPU Usage - User Then I created a new graph from template ucd/net - CPU Usage, and select the three data sources in the Graph Item Fields section. Graph is now enabled and running, but empty. No data have been collected. Under Console - Devices my SNMP host is listed as up and running: System:Linux ip-xx-xx-xxx-xxx 3.2.0-23-virtual #36-Ubuntu SMP Tue Apr 10 22:29:03 UTC 2012 x86_64 Uptime: 929267 (0 days, 2 hours, 34 minutes) Hostname: ip-xx-xx-xxx-xxx Location: Sitting on the Dock of the Bay Contact: Me [email protected] In SNMP Options I left all as it is: SNMP Version: Version 1 SNMP Community: public SNMP Timeout: 500 ms Maximum OID's Per Get Request: 10 In Console - Utilities - Cacti Log I have multiple warning (two for each data source) every 5 minutes: 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] Host[2] DS[18] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.4.15.0' 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] Host[1] DS[9] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.11.52.0' 10/29/2012 01:40:01 PM - CMDPHP: Poller[0] Host[2] DS[19] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:40:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.4.6.0' [...] I have the feeling I'm missing something, but I cannot get it...

  Read the article

• Can't start Bind9 on Ubuntu 10.04 + Plesk 10.1 - "named: no process found"

  - by bradley.ayers

  I've installed a fresh version of Ubuntu 10.04 64bit, I didn't install bind when choosing what packages should be installed in the Ubuntu installer. I downloaded the auto installer for Plesk 10.1 and installed it successfully. When I logged into the Plesk control panel and tried to change the password, it failed because it couldn't restart bind. I SSH'd into the box and tried a sudo /etc/init.d/bind9 restart and get the following: brad@ws01:/root# sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) rndc: connect failed: 127.0.0.1#953: connection refused named: no process found [ OK ] * Starting domain name service... bind9 [fail] Looking at tail /var/log/messages reveals a whole bunch of: Feb 23 16:08:21 ws01 kernel: [ 3840.065851] type=1503 audit(1298441301.831:31): operation="open" pid=5565 parent=5563 profile="/usr/sbin/named" requested_mask="::r" denied_mask="::r" fsuid=108 ouid=0 name="/var/named/run-root/etc/named.conf" Edit: After following ooshro's advice, bind runs, however I still get the named: no process found error: brad@ws01:/etc/apparmor.d$ sudo /etc/init.d/bind9 restart * Stopping domain name service... bind9 WARNING: key file (/etc/bind/rndc.key) exists, but using default configuration file (/etc/bind/rndc.conf) named: no process found [ OK ] * Starting domain name service... bind9 [ OK ]

  Read the article

• Using dnsmasq for accessing multiple nameservers assigned by DHCP

  - by Ash

  At my work desktop running openSUSE 11.4, I have a local network which gets its address, domain (work.site) and nameservers (10.100.1.1, 10.100.1.2) info through DHCP - which get written into /etc/resolv.conf I get to access the internet using the work network, and these 2 nameservers end up returning the entries for any public domain name lookups on the internet. I also have a private VPN that I end up connecting. The nameserver (10.111.1.1) and domain (private.site) are rarely bound to change for this network, but currently they're pushed by the openVPN client into networkmanager, and which also gets merged with the existing /etc/resolv.conf My resolv.conf ultimately ends up looking like this: search private.site work.site nameserver 127.0.0.1 nameserver 10.111.1.1 nameserver 10.100.1.1 As you can see the 2nd nameserver from my work network was pushed out because of the max 3 entry limitations. It is fine still, but would be a problem if that nameserver goes down for maintenance or something. So I found out that dnsmasq could help me here, and hence I setup dnsmasq just as a local DNS resolver without any DHCP support. So right now this is my /etc/dnsmasq.conf: resolv-file=/etc/resolv.conf server=/private.site/10.111.1.1 server=/1.111.10.in-addr.arpa/10.111.1.1 listen-address=127.0.0.1 bind-interfaces log-queries I've made dnsmasq get the list of nameservers from /etc/resolv.conf since NetworkManager seems to be updating this list correctly (for a max of 3 nameservers). I'm able to resolve the host names in both the networks correctly. So these are the questions I have: Is there a way I can make either NetworkManager or dhclient write out the list of nameservers somewhere else which I can make dnsmasq use as resolv-file ? How do I make dnsmasq use certain nameservers as the default for all queries ? Right now I notice that lookups for public domains on the internet are usually sent to both the nameservers - the one on work.site as well as private.site. It would be good if I can limit this only to work.site.

  Read the article

• How can I close a port that appears to be orphaned by Xvfb?

  - by Jim Fiorato

  I'm running Xvfb on a FC8 Amazon EC2 image. On occasion Xvfb will crash (unable at the moment to find out the reason for the crash), and after crashing the TCP port will appear to be orphaned. I'm unable to get a PID to kill any process that may be using it. I'm starting Xvfb with: Xvfb :7 -screen 0 1024x768x24 & Examples of what I'm working with are below, the Xvfb port is (was) 6007: # netstat -ap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:ssh *:* LISTEN 1894/sshd tcp 0 0 *:6007 *:* LISTEN - tcp 0 352 ip-10-84-69-165.ec2.int:ssh c-71-194-253-238.hsd1:51689 ESTABLISHED 2981/0 udp 0 0 *:bootpc *:* 1817/dhclient udp 0 0 *:bootpc *:* 1463/dhclient Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ] DGRAM 871 668/udevd @/org/kernel/udev/udevd unix 2 [ ACC ] STREAM LISTENING 5385 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 6 [ ] DGRAM 5353 1867/rsyslogd /dev/log unix 2 [ ] DGRAM 11861 2981/0 unix 2 [ ] DGRAM 5461 1974/crond unix 2 [ ] DGRAM 5451 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5438 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5437 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5396 1880/dbus-daemon unix 3 [ ] STREAM CONNECTED 5395 1880/dbus-daemon unix 2 [ ] DGRAM 5361 1871/rklogd # lsof -i COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME dhclient 1463 root 3u IPv4 4704 UDP *:bootpc dhclient 1817 root 4u IPv4 5173 UDP *:bootpc sshd 1894 root 3u IPv4 5414 TCP *:ssh (LISTEN) sshd 2981 root 3u IPv4 11825 TCP ip-10-84-69-165.ec2.internal:ssh->c-71-194-253-238.hsd1.il.comcast.net:51689 (ESTABLISHED) Attempting to force the port closed with iptables doesn't seem to work either. iptables -A INPUT -p tcp --dport 6007 -j DROP I'm at a loss as to how to reclaim/free the port. From what I can tell, this port will remain in this state until the EC2 instance is shut down. So, how can I close this port so I can restart Xvfb?

  Read the article

• Error while detecting start profile for instance with ID _u

  - by Techboy

  I am upgrading a SAP Java instance and am getting the error shown in the log below. There are not backup profile files in the profiles directory. The string _u does not exist in the default, start or instance profile for instance SCS01. Please can you suggest what the issue might be? Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initializexAbstractPhaseType.javax758x [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_PROFILES has been started. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initializexAbstractPhaseType.javax759x [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDetermineProfiles. Mar 13, 2010 12:09:01 PM [Info]: ...ap.sdt.j2ee.phases.PhaseTypeDetermineProfiles.checkVariablesxPhaseTypeDetermineProfiles.javax284x [Thread[main,5,main]]: All 4 required variables exist in variable handler. Mar 13, 2010 12:09:01 PM [Info]: ....j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariablexAbstractInfoController.javax302x [Thread[main,5,main]]: Parameter /J2EE/StandardSystem/DefaultProfilePath has been detected. Parameter value is \server1\SAPMNT\PI7\SYS\profile\DEFAULT.PFL. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.j2ee.tools.sysinfo.ProfileDetector.detectInstancexProfileDetector.javax340x [Thread[main,5,main]]: Instance SCS01 with profile \server1\SAPMNT\PI7\SYS\profile\PI7_SCS01_server1, start profile \server1\SAPMNT\PI7\SYS\profile\START_SCS01_server1, and host server1 has been detected. Mar 13, 2010 12:09:01 PM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecutexAbstractPhaseType.javax862x [Thread[main,5,main]]: Exception has occurred during the execution of the phase. Mar 13, 2010 12:09:01 PM [Error]: com.sap.sdt.j2ee.tools.sysinfo.ProfileDetector.detectInstancexProfileDetector.javax297x [Thread[main,5,main]]: Error while detecting start profile for instance with ID _u. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax905x [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_PROFILES has been completed. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax906x [Thread[main,5,main]]: Start time: 2010/03/13 12:09:01. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax908x [Thread[main,5,main]]: End time: 2010/03/13 12:09:01. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax909x [Thread[main,5,main]]: Duration: 0:00:00.078. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax910x [Thread[main,5,main]]: Phase status is error.

  Read the article

• How does a vsftpd server work and how to configure it?

  - by ysap

  I was asked to configure a FTP server, based on the vsftpd package. The server is running on a remote machine to which I have a superuser privilege access. Being unfamiliar with the mechanics of FTP servers, I tried to figure out how user ftp accounts are configured. The previous maintainer used a shell script, which works on a list that we maintain to track users accounts and passwords, to configure the ftp accounts. From reading the script, I see that he generates a list of usernames and passwords, and actually creates a user account on the Linux machine. This means that for each user that we configure in the list, a new user account is being added by the adduser command: adduser --home /home/ftp --no-create-home $user (but w/o a private /home/username directory - using the /home/ftp instaed). Each of these users can log into his account using the ssh command. This fact seems a little strange to me, as I'd think that the ftp account should be decoupled from the Ubuntu user accounts. As another side effect, when a user connects using a web browser, he is connected to the /home/ftp directory. However, he can then use "Up to a higher level directory" link to go up and effectively have access to all of our system. So, the questions are: Is this really how the FTP server supposed to work in terms of configuring ftp accounts? If not, how do I configure the vsftpd server in a way that I have only the superuser Ubuntu account on that machine and all ftp account are... just FTP user accounts? Additionally, these ftp account should be configured in terms of how and what they are allowed to access.

  Read the article

• XDEBUG/PHP doesn't dump profile even when set up properly?

  - by John D.

  I installed xdebug from source, but also tried my package manager (separately) and they both are loaded correctly (verified by restarting Apache and seeing the xdebug copyright info in phpinfo()) but they do not dump profiling information. Out of the 40 different attempts of configuration it logged once or twice but I lost what I did, I tried with first only loading the module in php.ini with no settings, but it didn't log to /tmp/. I tried many different settings but my current is now: xdebug.profiler_enable = Off xdebug.profiler_enable_trigger = 1 xdebug.profiler_output_dir = "/tmp/" xdebug.profiler_output_name = "profiler.%t" Of course I call my script through 127.0.0.1/test.php?XDEBUG_PROFILE, which is for enable_trigger. Do you know why it would not dump profiler information? nobody (Arch Linux) can write to /tmp/ as it has before, so I'm sure it is not a permissions error. Apache's error_log does not tell me anything about xdebug either, as it has loaded correctly. It just does not "work"! EDIT: I made a subfolder "xdebug_profiles" in /tmp/ and chown'ed it to nobody, and now it works flawlessly. I'm not sure why it couldn't write before, I guess it's just a caveat with nobody on Arch. I answered my own question , not enough points to answer it or comment, so consider this answered.

  Read the article

• nginx + wordpress in /wordpress subdir

  - by nkr1pt

  I installed nginx and would like to setup wordpress as a final step. I followed many howtos but am unable to get it working. The setup is fairly straightforward, the root dir of the webserver is /data/Sites/nkr1pt.homelinux.net. In that root dir I created a symlink to the wordpress folder in /usr/local/wordpress, so in fact all wordpress files can be accessed at /data/Sites/nkr1pt.homelinux.net/wordpress. Permissions are ok. The plan is to get wordpress working at http://sirius/wordpress, the server's name is sirius. spawn-fcgi is running and listening on port 7777. Here you can see the relevant config: server { listen 80; listen 8080; server_name sirius; root /data/Sites/nkr1pt.homelinux.net; passenger_enabled on; passenger_base_uri /redmine; #charset koi8-r; #access_log logs/access.log main; location ^~ /data { root /data/Sites/nkr1pt.homelinux.net; autoindex on; auth_basic "Restricted"; auth_basic_user_file htpasswd; } location ^~ /dump { root /data/Sites/nkr1pt.homelinux.net; autoindex on; } location ^~ /wordpress { try_files $uri $uri/ /wordpress/index.php; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:7777 location ~ \.php$ { #fastcgi_split_path_info ^(/wordpress)(/.*)$; fastcgi_pass localhost:7777; #fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; #index index.php; } please note that redmine, and the locations dump and data are working perfectly, it is only wordpress that I cannot get to work. Can you please help me to the correct wordpress configuration in nginx? All help is much appreciated!

  Read the article

• Using virtual IP with stunnel and haproxy

  - by beardtwizzle

  Hi there, We have a load-balancer setup, in which an HTTPS Request flows through the following steps:- Client -> DNS -> stunnel on Load-Balancer -> HAProxy on LB -> Web-Server This setup works perfectly when stunnel is listening to the local IP of the Load-Balancer. However in our setup we have 2 load-balancers and we want to be able to listen to a virtual IP, which only ever exists on one LB at a time (keepalived flips the IP to the second LB if the first one falls over). HAProxy has no problem in doing this (and I can ping the assigned virtual IP on the load-balancer I'm testing), but it seems stunnel hates the concept. Has anyone achieved this before (below is my stunnel config - as you can see I'm actually listening for ALL traffic on 443):- cert= /etc/ssl/certs/mycert.crt key = /etc/ssl/certs/mykey.key ;setuid = nobody ;setgid = nogroup pid = /etc/stunnel/stunnel.pid debug = 3 output = /etc/stunnel/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 [https] accept=443 connect=127.0.0.1:8443 TIMEOUTclose=0 xforwardedfor=yes Sorry for the long-winded question!

  Read the article

• Can’t connect to SQL Server 2008 - looks like Shared Memory problem

  - by user38556

  I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

  Read the article

• r1soft agent is failing with the error: "write error while sending code: Broken pipe"

  - by curiousguy

  I have an Ubuntu 10.04.4 LTS server with r1soft agent installed in it. Recently, the backups are failing with the following error. -------- write error while sending code: Broken pipe -------- I have reinstalled the buagent but to no avail. On checking the server logs, I could see the following errors listed in it: -------- # tail -f /var/log/messages |grep -i buagent Nov 17 03:35:06 microscope buagent: Need to back up 126 sectors Nov 17 03:35:06 microscope buagent: (Righteous Backup Linux Agent) 1.79.0 build 12433 Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.195) with valid RSA key Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.201) with valid RSA key Nov 17 03:35:06 microscope buagent: sending auth challenge for allowed host at (10.128.136.201) port (47890) Nov 17 03:35:06 microscope buagent: host (10.128.136.201) port (47890) authentication successful Nov 17 03:35:06 microscope buagent: Backup request accepted. Starting backup. Nov 17 03:35:06 microscope buagent: Snapshot completed in 0.010 seconds. Nov 17 03:45:03 microscope buagent: Error reading blocks from snapshot. Nov 17 03:45:03 microscope buagent: Reading blocks failed Nov 17 03:45:03 microscope buagent: error backup aborted Nov 17 03:45:03 microscope buagent: backup failed on agent closing connection Nov 17 03:45:03 microscope buagent: Backup failed. Nov 17 03:45:03 microscope buagent: write error while sending code: Broken pipe (32) Nov 17 03:45:03 microscope buagent: tell child write failed -------- I tried changing the 'Timeout' and 'DiskAsPartition' value in '/etc/buagent/agent_config' file but no luck. Also, verified that proper route is added to the backup server. The agent is also running fine. Am I missing anything? Any help would be much appreciated. Note: CDP 2.0 is installed in the backup server.

  Read the article

• smartctl not actually running self tests?

  - by canzar

  I want to run the smartctl self tests to check the health of the drives in my RAID array (PERC 5/i). The array is on sda and comprises six drives. I can check the status using sudo smartctl /dev/sda -d megaraid,0 -a And I see that SMART is available and enabled on all the drives. I have tried to run self tests using sudo smartctl /dev/sda -d megaraid,0 -t short and sudo smartctl /dev/sda -d megaraid,0 -t long I have also tried it on all of the drives 0-5. No matter what I try, when I run: sudo smartctl /dev/sda -d megaraid,0 -l selftest I always get the same result, which seems to always report that I have never run a self test. /dev/sda [megaraid_disk_00] [SAT]: Device open changed type from 'megaraid' to 'sat' ===START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] From what I read, I should have no problem running the short and long self tests on the array while it is mounted. Does anyone else have experience running these tests on a PERC 5/i raid array who could lend some insight into what is causing the problem? (smartmontools release 5.40 dated 2009-12-09 at 21:00:32 UTC)

  Read the article

• Lion server profile manager, device enrollment doesn't work

  - by user964406

  I am in the process of setting up Lion Servers profile manager to manage iPads on our local school network. I don't need to manage them while they are outside the network. I have successfully had it working on my personal network. The school network is behind a proxy which we have no control over. I can get the iPads to view the mydevices page and install a trust cert. I have managed to get an iPad to successfully install the remote management profile. After this the profile manager bugs out. It will list the active task of 'new device (sending)' but it's unable to complete the task. If I click on the device on profile manager and try any of the actions out they will all fail to complete. I am using the auto generated certificates and this works if I bring the server and iPad outside of the school network. Shortly after device enrollment the system log on the Lion server reports the following Replaced the actual ip address with INTERNALIP Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini applepushserviced[778]: Got connection error Error Domain=NSPOSIXErrorDomain Code=1 "The operation couldn\u2019t be completed. Operation not permitted" UserInfo=0x7fa483b1a340 {NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS} Jun 4 08:40:53 mini applepushserviced[778]: Failed to get client cert on attempt 2, will retry in 15 seconds Does anyone have any ideas on how to get past this stage? Thanks in advance.

  Read the article

• Selenium server causes crazy load on server - how to prevent?

  - by Eric

  I'm running this linux: Linux host.themepark.com 2.6.32-220.4.1.el6.x86_64 #1 SMP Tue Jan 24 02:13:44 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux And I run the Selenium stand-alone server on my box with this command: java -jar /home/l/cron/selenium-server-standalone-2.24.1.jar > /logs/selenium.log 2>&1 & Here's the problem: as soon as I do that, the server load starts skyrocketing. I even went back and downloaded older versions of the Selenium server, but same results with 2.23.1, 2.23.0, and 2.19.0. Note that the server load starts going nuts before I issue ANY commands to Selenium or do anything else. All I'm doing is firing up the server, per the command above. This used to work perfectly on my server without causing massive server load, so something has changed, but I'm not sure what. My server is a managed VPS so I don't know if there is some kind of auto-update script that kicked in or what... but it's a problem. (Incidentally, even though the server load climbs like crazy, everything still works: after firing up Selenium, my server creates a screen with Xvfb so Firefox will be happy, then a PHP script talks to Selenium to do what it needs to do before shutting everything down. It takes a LONG time, and the load gets all the way up to 8 [!!!] before it is finished, which kills my web server and makes the main site horribly unresponsive... but it does get everything done.) Any suggestions for what is going on, why it's started doing this and/or, most importantly, how I can make Selenium not kill the server when it starts up... would be GREATLY appreciated!

  Read the article

• Windows Terminal Server: occasional memory violation for applications

  - by syneticon-dj

  On a virtualized (ESXi 4.1) Windows Server 2008 SP2 32-bit machine which is used as a terminal server, I occasionally (approximately 1-3 event log entries a day) see applications fail with an 0xc0000005 error - apparently a memory access violation. The problem seems quite random and only badly reproducable - applications may run for hours, fail with 0xc0000005 and restart quite fine or just throw the access violation at startup and start flawlessly at the second attempt. The names of executables, modules and offset addresses vary, although a single executable tends to fail with same modules and the same memory offset addresses (like "OUTLOOK.EXE" repeatedly failing on module "olmapi32.dll" with the offset "0x00044b7a") - even across multiple user's logons and with several days passing without a single failure inbetween. The offset addresses seem to change across reboots, however. Only selective executables seem affected by the problem, although I may simply not be seeing a sufficient number of application runs from the other ones. I first suspected a possible problem with the physical machine's RAM, but ruled this out as a rather unlikely cause - the memory comes with ECC and I've already moved the virtual machine across several times, without any perceptable change. I've seen that DEP was enabled in "OptOut" mode on this machine: C:\Users\administrator>wmic OS Get DataExecutionPrevention_SupportPolicy DataExecutionPrevention_SupportPolicy 3 and tried changing the policy to OptIn via startup options: bcdedit.exe /set {current} nx OptIn but have yet to see any effect - I also would expect Outlook 12 or Adobe Reader 9 (both affected applications) to play well with DEP. Any other ideas why the apps may be failing?

  Read the article

• pread() read only xxxx of yyyy

  - by Alix Axel

  Occasionally, nginx doesn't send any data back to the browser (ERR_EMPTY_RESPONSE in Chrome). Upon checking the server error.log, I find these weird messages: 2013/10/20 23:57:40 [alert] 29146#0: *35 pread() read only 4653 of 4656 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/20 23:57:45 [alert] 29146#0: *36 pread() read only 4653 of 4656 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/20 23:58:18 [alert] 29146#0: *38 pread() read only 4650 of 4653 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/20 23:58:18 [alert] 29146#0: *39 pread() read only 4650 of 4653 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/20 23:58:19 [alert] 29146#0: *40 pread() read only 4650 of 4653 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/21 00:02:21 [alert] 29146#0: *41 pread() read only 4629 of 4641 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/21 00:02:21 [alert] 29146#0: *42 pread() read only 4629 of 4641 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/21 00:02:23 [alert] 29146#0: *43 pread() read only 4629 of 4641 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/21 00:02:31 [alert] 29146#0: *44 pread() read only 4629 of 4641 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" 2013/10/21 00:02:46 [alert] 29146#0: *45 pread() read only 4629 of 4641 from "~/htdocs/index.html" while sending response to client, client: 127.0.0.1, server: localhost, request: "GET / HTTP/1.1", host: "localhost" Does anyone have any idea why this happens? After a while everything is served correctly again.

  Read the article

• Unable to connect to EC2 instance after "reboot"

  - by KPL

  I am not able to connect to my m1.small instance after rebooting it. I have already associated the public IP with this instance. Upon checking the system log, this seems to be the issue: cloud-init-nonethttp://11.84: waiting 10 seconds for network device cloud-init-nonethttp://21.85: waiting 120 seconds for network device cloud-init-nonethttp://141.85: gave up waiting for a network device. Cloud-init v. 0.7.3 running 'init' at Sun, 18 May 2014 07:02:55 +0000. Up 142.54 seconds. ci-info: +++++++++++++++++++++++Net device info++++++++++++++++++++++++ ci-info: +--------+-------+-----------+-----------+-------------------+ ci-info: | Device | Up | Address | Mask | Hw-Address | ci-info: +--------+-------+-----------+-----------+-------------------+ ci-info: | lo | True | 127.0.0.1 | 255.0.0.0 | . | ci-info: | eth0 | False | . | . | 02:43:xx:xx:xx:xx | ci-info: +--------+-------+-----------+-----------+-------------------+ ci-info: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Route info failed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! A bunch of these follow the above message: 2014-05-18 07:02:56,178 - url_helper.pyWARNING: Calling http://169.254.169.254/2009-04-04/meta-data/instance-id failed 0/120s: request error [HTTPConnectionPool(host='169.254.169.254', port=80): Max retries exceeded with url: /2009-04-04/meta-data/instance-id (Caused by : Errno 101] Network is unreachable) This is obviously related to the network interface not being working correctly. I have tried this so far: Relaunch a new instance from the custom AMI (created from EBS) of the failing instance. The same error shows up in the logs. Attach a new network interface to the EC2 instance. The error still persists. eth1 shows up in the list but the "up" column is False.

  Read the article

• Problems building nodejs on MacOS Snow Leopard

  - by mrwooster

  I am having trouble building nodejs on MacOS Snow Leopard. I think it might have something to do with my PATH variable not being set correctly for the developer tools location. For some reason, the Developer tools (gcc, g++, make etc) are all stored in /Developer/usr/bin I added it to my PATH variable as follows: $ export PATH=$PATH:/Developer/usr/bin $ echo $PATH /opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin:/usr/X11/bin:/Developer/usr/bin When i try to configure it complains about not finding open-ssl, ok, not a big problem. So I try with --without-ssl : $ ./configure --without-ssl Checking for program g++ or c++ : /Developer/usr/bin/g++ Checking for program cpp : /Developer/usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /Developer/usr/bin/ranlib Checking for g++ : ok Checking for program gcc or cc : /Developer/usr/bin/gcc Checking for gcc : ok Checking for library dl : yes Checking for library util : yes Checking for library rt : not found --- libeio --- Checking for library pthread : yes Checking for function pthread_create : not found /Users/Guy/git_src/node/node/deps/libeio/wscript:13: error: the configuration failed (see '/Users/Guy/git_src/node/node/build/config.log') Anyone know how I can get round this? I am suspicious that it might be something to do with the PATH or another ENV variable, but not sure. Thanks G

  Read the article

• Oracle with Kerberos authentication and Windows 2003 Server as KDC

  - by Supaplex

  I am running Oracle 10.2 on a Windows 2003 Server SP2 which is also the domain controller on the network. I wish to switch authentication method from NTS to Kerberos. I have spent a lot of time trying to configure Oracle with Kerberos authentication from the Oracle Advanced Security option from the Net Manager utility. I have disabled NTS so Kerberos is promoted as the preferred authentication method. But as soon as the configuration is saved from Net Manager and I restart the Oracle server service, Oracle will not start. I don't know what Oracle is complaining about, because I don't know where to look for the Oracle error log. My first question is: how can I figure out what's bugging Oracle? My second question: is there a good tutorial for setting up Oracle on a Windows 2003 with Kerberos Authentication, where the Windows 2003 Server is the KDC? Maybe there is a book I can get? I have read Oracles own guide, but it is mostly for Linux/Unix. Thanks a lot!

  Read the article

• SSH public key authentication -- always require users to generate their own keypair?

  - by schinazi

  I was working with a partner today that I needed to upload files to my server using scp. I have passwords turned off in the server's SSH configuration, so I wanted them to use public key authentication. I generated the keypair for them on the server and gave them the private key and put the public key in the appropriate authorized_keys file. After a bunch of problems with them setting up their job, they finally got a more experienced sysadmin involved on their end, and he scolded me for handling the key generation this way. He said that by giving them a private key generated on my system, I had enabled them to do a brute-force attack against other keys generated on the same server. I even asked him "so if I have an account on a server, and I can log in with a password but I want to automate something and I generate a keypair on that system, does that then give me an attack vector for brute forcing other users' keys?" and he said yes. I've never heard of this, is it true? Can anyone point me to a discussion of this attack? Thanks in advance.

  Read the article

• Cisco SG 300-28P PoE switch appears to have damaged my domain server's network IF

  - by cdonner

  I just replaced the old HP ProCurve switch with a new Cisco SG 300-28P managed switch. It has PoE on all ports. Everything works, except for my domain server that went offline and the network interface appears to be dead. Windows says the network cable is disconnected, and no lights blink on the switch. Tried different cables and different ports on the switch. The Cisco PoE ports are supposed to be auto-sensing, i.e. not to send power to a device that cannot handle it. Is this technique not 100% reliable? The server is a SHUTTLE XS35V2 with an onboard network chip, so it is probably fried. My questions: is this plausible? who's fault is it - Shuttle or Cisco (i.e. which support line should I try first)? UPDATE: I did go back and tried another switch between the server and the Cisco switch, and indeed, the connection came back to live. When everything is powered down and I start fresh, with the server connected to the Cisco switch, the port light will blink for a while and the connection status is "No Internet connection" at first until it goes off after about 20 seconds and the connection status changes to "Network cable disconnected". On the other switch it works. Clearly not a PoE issue now. I will start looking into the Cisco's onboard diagnostic functions, but so far I have not noticed anything unusual in the log.

  Read the article

< Previous Page | 539 540 541 542 543 544 545 546 547 548 549 550  | Next Page >