Search Results

Search found 14737 results on 590 pages for 'dynamic tables'.

Page 544/590 | < Previous Page | 540 541 542 543 544 545 546 547 548 549 550 551  | Next Page >

  • MySQL performance over a (local) network much slower than I would expect

    - by user15241
    MySQL queries in my production environment are taking much longer than I would expect them too. The site in question is a fairly large Drupal site, with many modules installed. The webserver (Nginx) and database server (mysql) are hosted on separated machines, connected by a 100mbps LAN connection (hosted by Rackspace). I have the exact same site running on my laptop for development. Obviously, on my laptop, the webserver and database server are on the same box. Here are the results of my database query times: Production: Executed 291 queries in 320.33 milliseconds. (homepage) Executed 517 queries in 999.81 milliseconds. (content page) Development: Executed 316 queries in 46.28 milliseconds. (homepage) Executed 586 queries in 79.09 milliseconds. (content page) As can clearly be seen from these results, the time involved with querying the MySQL database is much shorter on my laptop, where the MySQL server is running on the same database as the web server. Why is this?! One factor must be the network latency. On average, a round trip from from the webserver to the database server takes 0.16ms (shown by ping). That must be added to every singe MySQL query. So, taking the content page example above, where there are 517 queries executed. Network latency alone will add 82ms to the total query time. However, that doesn't account for the difference I am seeing (79ms on my laptop vs 999ms on the production boxes). What other factors should I be looking at? I had thought about upgrading the NIC to a gigabit connection, but clearly there is something else involved. I have run the MySQL performance tuning script from http://www.day32.com/MySQL/ and it tells me that my database server is configured well (better than my laptop apparently). The only problem reported is "Of 4394 temp tables, 48% were created on disk". This is true in both environments and in the production environment I have even tried increasing max_heap_table_size and Current tmp_table_size to 1GB, with no change (I think this is because I have some BLOB and TEXT columns).

    Read the article

  • Primefaces tabview: set the active index on tab change

    - by Virgi
    I've got a tab view that contains two tab. When I switch from tab 1 to tab 2, I'm calling some code that executes a validation and updates some values. Depending on the result of this validation, I would like to stay on tab 1, or go to tab 2, and refresh the tabs' content. My tabview: <h:form id="form"> <p:tabView id="tabview" activeIndex="#{ctrl.idx}" dynamic="true" cache="false"> <p:ajax event="tabChange" listener="#{ctrl.doStuff}" update=":form:tabview"/> <p:tab title="Tab 1" id="t1"> <h:panelGrid columns="1" cellpadding="10"> <h:outputText value="#{ctrl.s1}"/> </h:panelGrid> </p:tab> <p:tab title="Tab 2" id="t2"> <h:panelGrid columns="1" cellpadding="10"> <h:outputText value="#{ctrl.s2}"/> </h:panelGrid> </p:tab> </p:tabView> </h:form> My test code that simly changes the values: public void doStuff() { s1 = String.valueOf(Math.random()); s2 = String.valueOf(Math.random()); } I thought that changing the active tab index in my method would be enough, like that: public void doStuff() { // ... idx = 0; } On tabChange event, the method is called but the tabview components goes to the clicked tab, ignoring the idx new value. I thought adding an update attribute to p:ajax would render the whole tabview but only the tabs and/or the tabs' content is re rendered. And weirdest of all, if I change update=":form:tabview" to update=":form" or update="@form", I only receive the tab's content in the ajax response - the component disappears from the page! My bean is viewscoped, I'm using Primefaces 3.5, JSF 2.1 and Tomcat 7. Any idea? Thanks.

    Read the article

  • Android RelativeLayout fill_parent unexpected behavior in a ListView with varying row heights

    - by Jameel Al-Aziz
    I'm currently working on a small update to a project and I'm having an issue with Relative_Layout and fill_parent in a list view. I'm trying to insert a divider between two sections in each row, much like the divider in the call log of the default dialer. I checked out the Android source code to see how they did it, but I encountered a problem when replicating their solution. To start, here is my row item layout: <?xml version="1.0" encoding="utf-8"?> <RelativeLayout android:id="@+id/RelativeLayout01" android:layout_width="fill_parent" xmlns:android="http://schemas.android.com/apk/res/android" android:padding="10dip" android:layout_height="fill_parent" android:maxHeight="64dip" android:minHeight="?android:attr/listPreferredItemHeight"> <ImageView android:id="@+id/infoimage" android:layout_width="wrap_content" android:layout_height="wrap_content" android:clickable="true" android:src="@drawable/info_icon_big" android:layout_alignParentRight="true" android:layout_centerVertical="true"/> <View android:id="@+id/divider" android:background="@drawable/divider_vertical_dark" android:layout_marginLeft="11dip" android:layout_toLeftOf="@+id/infoimage" android:layout_width="1px" android:layout_height="fill_parent" android:layout_marginTop="5dip" android:layout_marginBottom="5dip" android:layout_marginRight="4dip"/> <TextView android:id="@+id/TextView01" android:textAppearance="?android:attr/textAppearanceLarge" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_centerVertical="true" android:layout_toRightOf="@+id/ImageView01" android:layout_toLeftOf="@+id/divider" android:gravity="left|center_vertical" android:layout_marginLeft="4dip" android:layout_marginRight="4dip"/> <ImageView android:id="@+id/ImageView01" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignParentLeft="true" android:background="@drawable/bborder" android:layout_centerVertical="true"/> </RelativeLayout> The issue I'm facing is that each row has a thumbnail of varying height (ImageView01). If I set the RelativeLayout's layout_height property to fill_parent, the divider does not scale vertically to fill the row (it just remains a 1px dot). If I set layout_height to "?android:attr/listPreferredItemHeight", the divider fills the row, but the thumbnails shrink. I've done some debugging in the getView() method of the adapter, and it seems that the divider's height is not being set properly once the row has it's proper height. Here is a portion of the getView() method: public View getView(int position, View view, ViewGroup parent) { if (view == null) { view = inflater.inflate(R.layout.tag_list_item, parent, false); } The rest of the method simply sets the appropriate text and images for the row. Also, I create the inflater object in the adapter's constructor with: inflater = LayoutInflater.from(context); Am I missing something essential? Or does fill_parent just not work with dynamic heights?

    Read the article

  • AddHandler not working?

    - by EdenMachine
    I can't figure out why my addhandler is not firing? In the Sub "CreateTagStyle" thd AddHandler is to firing when the LinkButton is clicked Is there some reason that addhandlers can't be adding at certain points of the page lifecycle? <%@ Page Title="" Language="VB" MasterPageFile="~/_Common/Admin.master" %> <script runat="server"> Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) End Sub Protected Sub RadGrid1_NeedDataSource(ByVal source As Object, ByVal e As Telerik.Web.UI.GridNeedDataSourceEventArgs) If Not e.IsFromDetailTable Then Dim forms As New MB.RequestFormPacket() RadGrid1.DataSource = forms.GetPackets() End If End Sub Protected Sub RadGrid1_DetailTableDataBind(ByVal source As Object, ByVal e As Telerik.Web.UI.GridDetailTableDataBindEventArgs) Select Case e.DetailTableView.Name Case "gtvForms" Dim PacketID As Guid = e.DetailTableView.ParentItem.GetDataKeyValue("ID") e.DetailTableView.DataSource = MB.RequestForm.GetRequestForms(PacketID) End Select End Sub Protected Sub RadGrid1_InsertCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Name Case "gtvPackets" Dim rtbName As RadTextBox = TryCast(e.Item.FindControl("rtbName"), RadTextBox) Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim packet As New MB.RequestFormPacket() packet.Name = rtbName.Text packet.IsActive = IsActive packet.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False RadGrid1.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been added successfully.');", True) Case "gtvForms" Dim parentItem As GridDataItem = e.Item.OwnerTableView.ParentItem Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.RequestFormPacketID = CType(parentItem.OwnerTableView.DataKeyValues(parentItem.ItemIndex)("ID"), Guid) rf.FormID = rcbForms.SelectedValue If MB.RequestFormPacket.HasItems(rf.RequestFormPacketID) Then rf.SortOrder = rf.MaxSortOrder + 1 Else rf.SortOrder = 0 End If rf.Insert() e.Canceled = True e.Item.OwnerTableView.IsItemInserted = False TryCast(e.Item.NamingContainer.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_UpdateCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) If IsValid Then Select Case TryCast(e.Item.NamingContainer, GridTableView).Name Case "gtvPackets" Dim PacketID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim Name As String = TryCast(e.Item.FindControl("rtbName"), RadTextBox).Text Dim Tags As String = TryCast(e.Item.FindControl("hdnTags"), HiddenField).Value Dim IsActive As Boolean = TryCast(e.Item.FindControl("cbxIsActive"), CheckBox).Checked Dim rfp As New MB.RequestFormPacket() rfp.Update(PacketID, Name, IsActive) Call MB.RequestFormPacketTag.Insert(PacketID, Tags) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Request Form Packet has been updated successfully.');", True) Case "gtvForms" Dim RequestFormID As Guid = CType(CType(e.CommandSource, Button).NamingContainer, GridEditFormItem).GetDataKeyValue("ID") Dim rcbForms As RadComboBox = TryCast(e.Item.FindControl("rcbForms"), RadComboBox) Dim rf As New MB.RequestForm() rf.Update(RequestFormID, rcbForms.SelectedValue) e.Item.Edit = False TryCast(e.Item.NamingContainer, GridTableView).Rebind() End Select End If End Sub Protected Sub RadGrid1_DeleteCommand(ByVal source As Object, ByVal e As Telerik.Web.UI.GridCommandEventArgs) Dim editedItem As GridEditableItem = TryCast(e.Item, GridEditableItem) Select Case CType(editedItem.Parent.Parent, GridTableView).Name Case "gtvPackets" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestFormPacket.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form Packet has been deleted.');", True) Case "gtvForms" Dim ID As Guid = CType(CType(e.CommandSource, ImageButton).NamingContainer, GridDataItem).GetDataKeyValue("ID") MB.RequestForm.Delete(ID) System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "NotifyMessage('Request Form has been removed.');", True) End Select End Sub Protected Sub ibnItemUpArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveUp(ID) gtv.Rebind() End Sub Protected Sub ibnItemDownArrow_Command(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Dim gtv As GridTableView = CType(CType(sender, ImageButton).NamingContainer.NamingContainer, GridTableView) Dim ID As Guid = New Guid(e.CommandArgument.ToString()) Call MB.RequestForm.MoveDown(ID) gtv.Rebind() End Sub Protected Sub RadGrid1_RowDrop(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridDragDropEventArgs) If String.IsNullOrEmpty(e.HtmlElement) Then If e.DraggedItems(0).OwnerGridID = RadGrid1.ClientID Then If e.DestDataItem IsNot Nothing Then Dim gtv As GridTableView = CType(e.DestDataItem.NamingContainer, GridTableView) For Each gdi As GridDataItem In e.DraggedItems Select Case gtv.Name Case "gtvForms" MB.RequestForm.DragAndDropReorder(gdi.GetDataKeyValue("ID"), e.DestDataItem.GetDataKeyValue("ID"), IIf(e.DropPosition = GridItemDropPosition.Above, True, False)) gtv.Rebind() End Select Next End If End If End If End Sub Protected Sub cbxAllowDragAndDrop_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Dim cbx As CheckBox = CType(sender, CheckBox) If cbx.Checked Then RadGrid1.ClientSettings.AllowRowsDragDrop = True RadGrid1.ClientSettings.Selecting.AllowRowSelect = True RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = True Else RadGrid1.ClientSettings.AllowRowsDragDrop = False RadGrid1.ClientSettings.Selecting.AllowRowSelect = False RadGrid1.ClientSettings.Selecting.EnableDragToSelectRows = False End If End Sub Protected Sub ibnDisableToggleProcess_Click(ByVal sender As Object, ByVal e As System.Web.UI.ImageClickEventArgs) Dim ibn As ImageButton = CType(sender, ImageButton) Dim hdn As HiddenField = CType(ibn.NamingContainer.FindControl("hdnDisableProcessID"), HiddenField) Dim status As Boolean = MB.RequestFormPacket.ActivateToggle(New Guid(hdn.Value)) Dim gtv As GridTableView = CType(ibn.NamingContainer.NamingContainer, GridTableView) gtv.Rebind() System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "SuccessMessage('Process has been " & IIf(status, "Activated", "Deactivated") & ".');", True) End Sub Protected Function DisplayTagList(ByVal tags As IEnumerable(Of MB.RequestFormPacketTag)) As String Dim list As String = "" For Each t As MB.RequestFormPacketTag In tags list += "<span class=""tags"">" & t.Tag.Name & "</span>" Next Return list End Function Protected Sub RadGrid1_ItemDataBound(ByVal sender As Object, ByVal e As Telerik.Web.UI.GridItemEventArgs) Select Case e.Item.GetType.Name Case "GridEditFormInsertItem" 'do nothing Case "GridEditFormItem" Dim plh As PlaceHolder = CType(e.Item.FindControl("plhTags"), PlaceHolder) Dim hdn As HiddenField = CType(e.Item.FindControl("hdnTags"), HiddenField) If hdn IsNot Nothing Then Dim gefi As GridEditFormItem = e.Item Dim packet As MB.RequestFormPacket = gefi.DataItem For Each pt As MB.RequestFormPacketTag In packet.RequestFormPacketTags Call CreateTagStyle(plh, hdn, pt.Tag.Name) If hdn.Value = "" Then hdn.Value = "|" End If hdn.Value += pt.Tag.Name & "|" Next End If End Select End Sub Protected Sub btnAddTag_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim btnAddTag As Button = sender Dim rtbTags As RadTextBox = btnAddTag.NamingContainer.FindControl("rtbTags") Dim plhTags As PlaceHolder = btnAddTag.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = btnAddTag.NamingContainer.FindControl("hdnTags") Dim TagExists As Boolean = False rtbTags.Text = rtbTags.Text.ToUpper().Trim() Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next If TagExists = False And String.IsNullOrEmpty(rtbTags.Text) = False Then Call CreateTagStyle(plhTags, hdnTags, rtbTags.Text) If String.IsNullOrEmpty(hdnTags.Value) Then hdnTags.Value = "|" End If hdnTags.Value += rtbTags.Text & "|" 'System.Web.UI.ScriptManager.RegisterStartupScript(Me.Page, Me.GetType(), "ClientMessage", "highlightTag('" & lbn.ClientID & "');", True) End If rtbTags.Text = "" rtbTags.Focus() End Sub Public Sub RemoveTag(ByVal sender As Object, ByVal e As EventArgs) Response.End() Dim lbnSender As LinkButton = sender Dim plhTags As PlaceHolder = lbnSender.NamingContainer.FindControl("plhTags") Dim hdnTags As HiddenField = lbnSender.NamingContainer.FindControl("hdnTags") Response.Write(hdnTags.Value) Response.End() Dim TagExists As Boolean = False Dim currentTags() As String = Split(hdnTags.Value, "|") For i As Integer = 1 To currentTags.Count - 2 Call CreateTagStyle(plhTags, hdnTags, currentTags(i)) Next End Sub Protected Sub CreateTagStyle(ByVal plh As PlaceHolder, ByVal hdn As HiddenField, ByVal tagName As String) Dim lbn As New LinkButton() lbn.ID = "lbn_" & hdn.ClientID & "_" & tagName lbn.CssClass = "deleteCreateTag" lbn.Text = "X" AddHandler lbn.Click, AddressOf RemoveTag plh.Controls.Add(New LiteralControl("<div><span class=showTag>" & tagName & "</span>")) plh.Controls.Add(lbn) plh.Controls.Add(New LiteralControl("</div>")) End Sub </script> <asp:Content ID="Content1" ContentPlaceHolderID="head" Runat="Server"> <style type="text/css"> .tags { border:solid 1px #93AFE5; background-color:#F3F7F8; margin: 0px 2px 0px 2px; padding: 0px 4px 0px 4px; font-family:Verdana; font-size:10px; text-transform:uppercase; } </style> <script type="text/javascript"> function highlightTag(id) { $("#" + id).highlightFade({ color: '#FFFF99', speed: 2000, iterator: 'sinusoidal' }); } </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <telerik:RadAjaxManager ID="RadAjaxManager1" runat="server" DefaultLoadingPanelID="RadAjaxLoadingPanel1" EnableAJAX="false"> <AjaxSettings> <telerik:AjaxSetting AjaxControlID="RadGrid1"> <UpdatedControls> <telerik:AjaxUpdatedControl ControlID="RadGrid1" /> </UpdatedControls> </telerik:AjaxSetting> </AjaxSettings> </telerik:RadAjaxManager> <telerik:RadAjaxLoadingPanel ID="RadAjaxLoadingPanel1" runat="server" /> <telerik:RadTabStrip ID="RadTabStrip1" runat="server" Skin="WebBlue" style="position:relative;top:1px;" ValidationGroup="vgTabs"> <Tabs> <telerik:RadTab Text="Request Form Packets" Selected="true" ImageUrl="~/Admin/Images/Packet2.png" /> <telerik:RadTab Text="Request Forms" NavigateUrl="Forms.aspx" ImageUrl="~/Admin/Images/Forms.png" /> </Tabs> </telerik:RadTabStrip> <asp:ObjectDataSource ID="odsForms" runat="server" TypeName="MB.Form" SelectMethod="GetForms" /> <asp:Panel ID="pnlContent" runat="server" CssClass="ContentPanel"> <telerik:RadGrid ID="RadGrid1" runat="server" AllowPaging="True" AllowSorting="True" GridLines="None" OnNeedDataSource="RadGrid1_NeedDataSource" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true" OnInsertCommand="RadGrid1_InsertCommand" OnUpdateCommand="RadGrid1_UpdateCommand" OnDeleteCommand="RadGrid1_DeleteCommand" OnRowDrop="RadGrid1_RowDrop" OnDetailTableDataBind="RadGrid1_DetailTableDataBind" OnItemDataBound="RadGrid1_ItemDataBound"> <%-----------------------------------------------------------%> <%------------------------- PACKETS -------------------------%> <%-----------------------------------------------------------%> <MasterTableView AutoGenerateColumns="False" DataKeyNames="ID" ClientDataKeyNames="ID" ShowHeadersWhenNoRecords="true" Name="gtvPackets" NoMasterRecordsText="There are currently no Request Form Packets" GroupLoadMode="Client" RetrieveNullAsDBNull="true" CommandItemDisplay="Top" AllowAutomaticUpdates="true" AllowAutomaticDeletes="true" AllowAutomaticInserts="true"> <RowIndicatorColumn> <HeaderStyle Width="20px"></HeaderStyle> </RowIndicatorColumn> <ExpandCollapseColumn> <HeaderStyle Width="20px"></HeaderStyle> </ExpandCollapseColumn> <CommandItemTemplate> <table width="100%"> <tr> <td class="AdminGridHeader">&nbsp;<img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Request Form Packets</td> <td width="1%"><asp:CheckBox ID="cbxAllowDragAndDrop" runat="server" AutoPostBack="true" OnCheckedChanged="cbxAllowDragAndDrop_CheckedChanged" /></td> <td width="1%" nowrap="nowrap"><asp:Label AssociatedControlID="cbxAllowDragAndDrop" ID="Label1" runat="server" Text="Enable Drag and Drop Reordering" ToolTip="Drag and Drop Reordering applies only to Forms." /></td> <td align="right" width="1%"><asp:Button ID="btnAddPacket" Text="Create New Packet" runat="server" CommandName="InitInsert" /></td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" HeaderStyle-Font-Bold="true" UniqueName="EditCommandColumn" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Packet Name" UniqueName="PacketName" SortExpression="Name"> <ItemTemplate> <img src="../Admin/Images/Packet2.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;<%#Eval("Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadTextBox runat="server" ID="rtbName" Width="300" Text='<%# Bind("Name") %>' /> <asp:RequiredFieldValidator ID="rfvName" runat="server" ErrorMessage="Required" ControlToValidate="rtbName" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Tags" UniqueName="Tags"> <ItemTemplate> <%#DisplayTagList(Eval("RequestFormPacketTags"))%> </ItemTemplate> <EditItemTemplate> <asp:Panel ID="pnlAddTags" runat="server" DefaultButton="btnAddTag"> <table cellpadding="0" cellspacing="0"> <tr> <td> <telerik:RadTextBox ID="rtbTags" runat="server" Width="200" style="text-transform:uppercase;" /> <asp:RegularExpressionValidator ID="revTags" runat="server" ErrorMessage="Invalid Entry" ControlToValidate="rtbTags" Display="Dynamic" ValidationExpression="^[^<>`~!/@\#}$%:;)(_^{&*=|+]+$" ValidationGroup="vgTags" /> </td> <td> <asp:Button ID="btnAddTag" runat="server" ValidationGroup="vgTags" Text="Add" OnClick="btnAddTag_Click" /> </td> </tr> </table> </asp:Panel> <div id="divTags"> <asp:PlaceHolder id="plhTags" runat="server" /> <asp:HiddenField ID="hdnTags" runat="server" /> </div> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderTooltip="Disable" ItemStyle-Width="1%" ItemStyle-HorizontalAlign="Center" SortExpression="IsActive" UniqueName="IsActive" ReadOnly="true"> <ItemTemplate> <asp:ImageButton ID="ibnDisabledProcess" runat="server" ImageUrl="../Images/Icons/Stop.png" Width="16" OnClientClick="return window.confirm('Activate this Process?');" ToolTip="Click to activate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),false,true) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:ImageButton ID="ibnEnabledProcess" runat="server" ImageUrl="../Images/Icons/Stop_disabled.png" Width="16" OnClientClick="return window.confirm('Deactivate this Process?');" ToolTip="Click to deactivate this Request for Account use." Visible='<%#IIF(Eval("IsActive"),true,false) %>' OnClick="ibnDisableToggleProcess_Click" /> <asp:HiddenField ID="hdnDisableProcessID" runat="server" Value='<%#Eval("ID") %>' /> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Is Active" UniqueName="IsActiveCheckbox" Display="false"> <EditItemTemplate> <asp:CheckBox ID="cbxIsActive" runat="server" Checked='<%# IIF(Eval("IsActive") Is DbNull.Value OrElse Eval("IsActive") = False,False,True) %>' /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridEditCommandColumn ButtonType="ImageButton" EditText="Edit Admin" ItemStyle-Width="16" EditImageUrl="~/Images/edit-small.png" /> <telerik:GridButtonColumn ConfirmText="Do you really want to delete this Admin? WARNING: THIS CANNOT BE UNDONE!!" ConfirmDialogType="RadWindow" ConfirmTitle="Delete" ButtonType="ImageButton" CommandName="Delete" Text="Delete Admin" ImageUrl="~/Images/Delete.png" UniqueName="DeleteColumn"> <ItemStyle HorizontalAlign="Center" Width="16" /> </telerik:GridButtonColumn> </Columns> <DetailTables> <%-----------------------------------------------------------%> <%-------------------------- FORMS --------------------------%> <%-----------------------------------------------------------%> <telerik:GridTableView Name="gtvForms" AllowPaging="true" PagerStyle-Position="TopAndBottom" PageSize="20" AutoGenerateColumns="false" DataKeyNames="RequestFormPacketID,ID" runat="server" CommandItemDisplay="Top" Width="100%"> <ParentTableRelation> <telerik:GridRelationFields DetailKeyField="RequestFormPacketID" MasterKeyField="ID" /> </ParentTableRelation> <CommandItemTemplate> <table width="100%" class="AdminGridHeaders"> <tr> <td class="AdminGridHeaders"> &nbsp;<img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" />&nbsp;&nbsp;Forms </td> <td align="right"> <asp:Button ID="ibnAdd" runat="server" Text="Add Form" CommandName="InitInsert" /> </td> </tr> </table> </CommandItemTemplate> <EditFormSettings> <EditColumn ButtonType="PushButton" InsertText="Save" UpdateText="Update" CancelText="Cancel" /> </EditFormSettings> <EditItemStyle Font-Bold="true" BackColor="#FFFFCC" /> <Columns> <telerik:GridTemplateColumn HeaderText="Form Name" UniqueName="FormName"> <ItemTemplate> <img src="../Admin/Images/Forms.png" align="absmiddle" width="16" height="16" style="margin-right:4px;" /> <%#Eval("Form.Name")%> </ItemTemplate> <EditItemTemplate> <telerik:RadComboBox ID="rcbForms" runat="server" DataSourceID="odsForms" AppendDataBoundItems="true" DataTextField="Name" DataValueField="ID" SelectedValue='<%#Bind("FormID")%>'> <Items> <telerik:RadComboBoxItem Text="-- Select a Form --" Value="" /> </Items> </telerik:RadComboBox> <asp:RequiredFieldValidator ID="rfvForms" runat="server" ErrorMessage="Required" ControlToValidate="rcbForms" InitialValue="-- Select a Form --" Display="Dynamic" /> </EditItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Test" ReadOnly="true" UniqueName="TestForm" HeaderStyle-Width="1%" ItemStyle-HorizontalAlign="Center"> <ItemTemplate> <asp:HyperLink ID="hypTestForm" runat="server" NavigateUrl='<%# "FormsPreview.aspx?fid=" & Eval("FormID").ToString() & "&test=true" %>' Target="_blank"><asp:Image ID="imgTestProcess" runat="server" ImageUrl="~/Admin/Images/Test.png" ImageAlign="AbsMiddle" ToolTip="Test Form" /></asp:HyperLink> </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn HeaderText="Header" SortExpression="Header" UniqueName="Header"> <ItemTemplate> <%#Eval("Form.Header")%>&nbsp; </ItemTemplate> </telerik:GridTemplateColumn> <telerik:GridTemplateColumn ReadOnly="true" ItemStyle-HorizontalAlign="Center" HeaderStyle-Width="1%" HeaderStyle-Wrap="false" ItemStyle-Wrap="false" UniqueName="SortOrder"> <ItemTemplate> <asp:ImageButton ID="ibnItemUpArrow" runat="server" Width="16" height="16" ImageUrl="~/Admin/Images/ArrowUp.png" ImageAlign="AbsMiddle" Visible='<%#IIF(Eval("SortOrder") = 0,false,true) %>' CommandArgument='<%#Eval("ID") %>' OnCommand=

    Read the article

  • jQuery override default validation error message display (Css) Popup/Tooltip like

    - by Phill Pafford
    I'm trying to over ride the default error message label with a div instead of a label. I have looked at this post as well and get how to do it but my limitations with CSS are haunting me. How can I display this like some of these examples: Example #1 (Dojo) - Must type invalid input to see error display Example #2 Here is some example code that overrides the error label to a div element $(document).ready(function(){ $("#myForm").validate({ rules: { "elem.1": { required: true, digits: true }, "elem.2": { required: true } }, errorElement: "div" }); }); Now I'm at a loss on the css part but here it is: div.error { position:absolute; margin-top:-21px; margin-left:150px; border:2px solid #C0C097; background-color:#fff; color:white; padding:3px; text-align:left; z-index:1; color:#333333; font:100% arial,helvetica,clean,sans-serif; font-size:15px; font-weight:bold; } UPDATE: Okay I'm using this code now but the image and the placement on the popup is larger than the border, can this be adjusted to be dynamic is height? if (element.attr('type') == 'radio' || element.attr('type') == 'checkbox') { element = element.parent(); offset = element.offset(); error.insertBefore(element) error.addClass('message'); // add a class to the wrapper error.css('position', 'absolute'); error.css('left', offset.left + element.outerWidth()); error.css('top', offset.top - (element.height() / 2)); // Not working for Radio, displays towards the bottom of the element. also need to test with checkbox } else { // Error placement for single elements offset = element.offset(); error.insertBefore(element) error.addClass('message'); // add a class to the wrapper error.css('position', 'absolute'); error.css('left', offset.left + element.outerWidth()); error.css('top', offset.top - (element.height() / 2)); } the css is the same as below (your css code) Html <span> <input type="radio" class="checkbox" value="P" id="radio_P" name="radio_group_name"/> <label for="radio_P">P</label> <input type="radio" class="checkbox" value="S" id="radio_S" name="radio_group_name"/> <label for="radio_S">S</label> </span>

    Read the article

  • Wrap or adorn wpf listview datatemplate

    - by Chris Cap
    I'm attempting to essentially wrap the contents of a DateTemplate in a listview gridview column with a border. What I want to know is if it's possible to supply an adorner that will surround that template so that I don't have to specify the border in every single datatemplate on every column (which is what I'm doing now). I've got something like this, but I know it's not right <Style TargetType="{x:Type ListBoxItem}"> <Setter Property="TemplateContent"> <Setter.Value> <ControlTemplate> <StackPanel> <Border BorderBrush="Green" BorderThickness="1"> <AdornedElementPlaceholder /> </Border> </StackPanel> </ControlTemplate> </Setter.Value> </Setter> </Style> This complains that Templatecontent is not a valid type. I've also tried with DataTemplate and that doesn't work either (understandably so). I know I could just create a DataTemplate, however the content for each column is different. At the very least, it binds to different fields. I'm wondering if there's a solution using a dynamic resource, but I don't know much about it. Thanks for your help EDIT: here's a sample of my listview <ListView ItemsSource="{Binding Path=OrderLines}" ItemContainerStyle="{StaticResource ResourceKey=ListViewItemContainerStyle}"> <ListView.View> <GridView> <GridViewColumn> <GridViewColumn.CellTemplate> <DataTemplate> <TextBox MaxWidth="30" Width="30" MaxLength="2" Text="{Binding Path=Quantity,ValidatesOnDataErrors=True}" /> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridView> <ListView.View> </ListView> Essentially I want to wrap that text box in the data template and any other items in additional columns.

    Read the article

  • GZip compression with WCF hosted on IIS7

    - by joniba
    So I'm going to add my query to the small ocean of questions on the subject. I'm trying to enable GZip compression on large soap responses from a WCF service. So far, I've followed instructions here and in a variety of other places to enable dynamic compression on IIS. Here's my dynamicTypes section from the applicationHost.config: <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> <add mimeType="application/xop+xml" enabled="true" /> <add mimeType="application/soap+xml" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> And also: <urlCompression doDynamicCompression="true" dynamicCompressionBeforeCache="true" /> Though I'm not so clear on why that's needed. Threw some extra mime-types in there just in case. I've implemented IClientMessageInspector to add Accept-Encoding: gzip, deflate to my client's HttpRequests. Here's an example of a request-header taken from fiddler: POST http://[omitted]/TestMtomService/TextService.svc HTTP/1.1 Content-Type: application/soap+xml; charset=utf-8 Accept-Encoding: gzip, deflate Host: [omitted] Content-Length: 542 Expect: 100-continue Now, this doesn't work. There's simply no compression happening, no matter what the size of the message (tried up to 1.5Mb). I've looked at this post, but have not run into an exception as he describes, so I haven't tried the CodeProject implementation that he proposes. Also I've seen a lot of other implementations that are supposed to get this to work, but cannot make sense of them (e.g., msdn's GZip encoder). Why would I need to implement the encoder, or the code-project solution? Shouldn't IIS take care of the compression? So what else do I need to do to get this to work? Joni

    Read the article

  • UML assignment question

    - by waitinforatrain
    Hi guys, Sorry, I know this is a very lame question to ask and not of any use to anyone else. I have an assignment in UML due tomorrow and I don't even know the basics (all-nighter ahead!). I'm not looking for a walkthrough, I simply want your opinion on something. The assignment is as follows (you only need to skim over it!): ============= Gourmet Surprise (GS) is a small catering firm with five employees. During a typical weekend, GS caters fifteen events with twenty to fifty people each. The business has grown rapidly over the past year and the owner wants to install a new computer system for managing the ordering and buying process. GS has a set of ten standard menus. When potential customers call, the receptionist describes the menus to them. If the customer decides to book an event (dinner, lunch, picnic, finger food etc.), the receptionist records the customer information (e.g., name, address, phone number, etc.) and the information about the event (e.g., place, date, time, which one of the standard menus, total price) on a contract. The customer is then faxed a copy of the contract and must sign and return it along with a deposit (often a credit card or by check) before the event is officially booked. The remaining money is collected when the catering is delivered. Sometimes, the customer wants something special (e.g., birthday cake). In this case, the receptionist takes the information and gives it to the owner who determines the cost; the receptionist then calls the customer back with the price information. Sometimes the customer accepts the price, other times, the customer requests some changes that have to go back to the owner for a new cost estimate. Each week, the owner looks through the events scheduled for that weekend and orders the supplies (e.g., plates) and food (e.g., bread, chicken) needed to make them. The owner would like to use the system for marketing as well. It should be able to track how customers learned about GS, and identify repeat customers, so that GS can mail special offers to them. The owner also wants to track the events on which GS sent a contract, but the customer never signed the contract and actually booked a GS. Exercise: Create an activity diagram and a use case model (complete with a set of detail use case descriptions) for the above system. Produce an initial domain model (class diagram) based on these descriptions. Elaborate the use cases into sequence diagrams, and include any state diagrams necessary. Finally use the information from these dynamic models to expand the domain model into a full application model. ============= In your opinion, do you think this question is asking me to come up with a package for an online ordering system to replace the system described above, or to create UML diagrams that facilitate the existing telephone-based system?

    Read the article

  • Custom DataAnnotation attribute with datastore access in ASP.NET MVC 2

    - by mare
    I have my application designed with Repository pattern implemented and my code prepared for optional dependency injection in future, if we need to support another datastore. I want to create a custom validation attribute for my content objects. This attribute should perform some kind of datastore lookup. For instance, I need my content to have unique slugs. To check if a Slug already exist, I want to use custom DataAnnotation attribute in my Base content object (instead of manually checking if a slug exists each time in my controller's Insert actions). Attribute logic would do the validation. So far I have come up with this: public class UniqueSlugAttribute : ValidationAttribute { private readonly IContentRepository _repository; public UniqueSlugAttribute(ContentType contentType) { _repository = new XmlContentRepository(contentType); } public override bool IsValid(object value) { if (string.IsNullOrWhiteSpace(value.ToString())) { return false; } string slug = value.ToString(); if(_repository.IsUniqueSlug(slug)) return true; return false; } } part of my Base content class: ... [DataMember] public ContentType ContentType1 { get; set; } [DataMember] [Required(ErrorMessageResourceType = typeof (Localize), ErrorMessageResourceName = "Validation_SlugIsBlank")] [UniqueSlug(ContentType1)] public string Slug { get { return _slug; } set { if (!string.IsNullOrEmpty(value)) _slug = Utility.RemoveIllegalCharacters(value); } } ... There's an error in line [UniqueSlug(ContentType1)] saying: "An attribute argument must be a constant expression, typeof expression or array creation expression of an attribute parameter type." Let me explain that I need to provide the ContentType1 parameter to the Constructor of UniqueSlug class because I use it in my data provider. It is actually the same error that appears if you try do to this on the built-in Required attribute: [Required(ErrorMessageResourceType = typeof (Localize), ErrorMessageResourceName = Resources.Localize.SlugRequired] It does not allow us to set it to dynamic content. In the first case ContentType1 gets known at runtime, in the second case the Resources.Localize.SlugRequired also gets known at runtime (because the Culture settings are assigned at runtime). This is really annoying and makes so many things and implementation scenarios impossible. So, my first question is, how to get rid of this error? The second question I have, is whether you think that I should redesign my validation code in any way?

    Read the article

  • UITableViewCell rounded corners and clip subviews

    - by Brenden
    I can't find anything anywhere(search engines, docs, here, etc) that shows how to create rounded corners (esp. in a grouped table view) on an element that also clips the subviews. I have code that properly creates a rounded rectangle out of a path with 4 arcs(the rounded corners) that has been tested in the drawRect: method in my subclassed uitableviewcell. The issue is that the subviews, which happen to be uibuttons with their internal uiimageviews, do no obey the CGContextClip() that the uitableviewcell obeys. Here is the code: - (void)drawRect:(CGRect)rect { CGContextRef context = UIGraphicsGetCurrentContext(); CGFloat radius = 12; CGFloat width = CGRectGetWidth(rect); CGFloat height = CGRectGetHeight(rect); // Make sure corner radius isn't larger than half the shorter side if (radius > width/2.0) radius = width/2.0; if (radius > height/2.0) radius = height/2.0; CGFloat minx = CGRectGetMinX(rect) + 10; CGFloat midx = CGRectGetMidX(rect); CGFloat maxx = CGRectGetMaxX(rect) - 10; CGFloat miny = CGRectGetMinY(rect); CGFloat midy = CGRectGetMidY(rect); CGFloat maxy = CGRectGetMaxY(rect); [[UIColor greenColor] set]; CGContextBeginPath(context); CGContextMoveToPoint(context, minx, midy); CGContextAddArcToPoint(context, minx, miny, midx, miny, radius); CGContextAddArcToPoint(context, maxx, miny, maxx, midy, radius); CGContextAddArcToPoint(context, maxx, maxy, midx, maxy, radius); CGContextAddArcToPoint(context, minx, maxy, minx, midy, radius); CGContextClip(context); CGContextFillRect(context, rect); [super drawRect:rect]; } Because this specific case is static(only shows in 1 specific row of buttons), I can edit the images being used for the buttons to get the desired effect. HOWEVER, I have another case that is dynamic. Specifically, a grouped table with lots of database-driven results that will show photos that may be in the first or last row with rounded corners and thus needs to be clipped). So, is it possible to create a CGContextClip() that also clips the subviews? If so, how?

    Read the article

  • Team Foundation Server Setup/Access

    - by Angel Brighteyes
    What I need: A TFS 2010 Setup that allows 2 application developers to access the TFS from remote locations. How it is setup: Server 2008 Standard 2g Ram 300g HD space SharePoint Server 2007, using SQL Server 2005 SQL Server 2008 Standard Team Foundation Server 2010 IIS 7 Sharepoint Bindings: TFS.DynAccount.Me:80; TFS:80 TFS Bindings: TFS.DynAccount.Me:8080; TFS:8080 Using DynDNS service to account for the dynamic ip address being used, this is a requirement for the moment until I can get a better isp package. Access using Local Accounts Server is not setup on a domain, or as a domain. Consequently I did not setup AD services. Problem: When logged into TFS using my credentials TFS\AdminUser through the DynDNS account TFS.DynAccount.Me I recieve the 'Red X of Death' on the Documents and Reports folder. When logged into the TFS through the local peer to peer network using the same credentials TFS\AdminUser I do not receive the 'Red X of Death' problem. Further Troubleshooting: When users 'Right Click' the 'TeamProject1' Click 'Show Project Portal' it tries to take them to http://TFS:8080 instead of http://TFS.DynAccount.Me:8080, which doing further research I am assuming that it is because team foundation server was setup with a local name of TFS instead of 'TFS.DynAccount.Me' as specified here in Visual Studio Magazines: The Red X of Death. Users can Access the Team Portal for SharePoint via http://TFS.DynAccount.Me/TeamCollection/TeamProject so it is not like we are dead in the water or anything. However, as most employees/staff are prone to do, they have expressed a great distaste for having to do it this way and just be patient until the current project is finished since we are under a very strict deadline. Is there a way to set this up differently, or change some settings someplace, reinstall it, point a CName record for our domain website to the DynAccount (e.g. TFS.OurDomain.com points to TFS.DynAccount.Me, which consequently does allow access to the http site without issues), or something. I really don't feel like after all the time and effort I have spent into, first the cost, second the bloody install, third learning SharePoint well enough, fourth the hours into days spent on this, fifth more troubleshooting, sixth employee headaches to just let it lay where it is at. I figure in my spare/off time I would keep trying to get this to work. So I really appreciate any help any one can give me. I know this is probably something really stupid simple that I will 'Face Palm' over, but at the moment the stress and frustration just has me beat. Thank you again, this community has always been a great help.

    Read the article

  • NHibernate: No persister error

    - by Mike
    Hello, In my quest to further my knowledge, I'm trying to get get NHibernate running. I have the following structure to my solution Core Class Library Project Infrastructure Class Library Project MVC Application Project Test Project In my Core project I have created the following entity: using System; namespace Core.Domain.Model { public class Category { public virtual Guid Id { get; set; } public virtual string Name { get; set; } } } In my Infrastructure Project I have the following mapping: <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" namespace="Core.Domain.Model" assembly="Core"> <class name="Category" table="Categories" dynamic-update="true"> <cache usage="read-write"/> <id name="Id" column="Id" type="Guid"> <generator class="guid"/> </id> <property name="Name" length="100"/> </class> </hibernate-mapping> With the following config file: <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> <session-factory> <property name="connection.driver_class">NHibernate.Driver.SqlClientDriver</property> <property name="connection.connection_string">server=xxxx;database=xxxx;Integrated Security=true;</property> <property name="show_sql">true</property> <property name="dialect">NHibernate.Dialect.MsSql2008Dialect</property> <property name="cache.use_query_cache">false</property> <property name="adonet.batch_size">100</property> <property name="proxyfactory.factory_class">NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle</property> <mapping assembly="Infrastructure" /> </session-factory> </hibernate-configuration> In my test project, I have the following Test [TestMethod] [DeploymentItem("hibernate.cfg.xml")] public void CanCreateCategory() { IRepository<Category> repo = new CategoryRepository(); Category category = new Category(); category.Name = "ASP.NET"; repo.Save(category); } I get the following error when I try to run the test: Test method Volunteer.Tests.CategoryTests.CanCreateCategory threw exception: NHibernate.MappingException: No persister for: Core.Domain.Model.Category. Any help would be greatly appreciated. I do have the cfg build action set to embedded resource. Thanks!

    Read the article

  • Entity Attribute Value Database vs. strict Relational Model Ecommerce question

    - by Dr. Zim
    It is safe to say that the EAV/CR database model is bad. That said, Question: What database model, technique, or pattern should be used to deal with "classes" of attributes describing e-commerce products which can be changed at run time? In a good E-commerce database, you will store classes of options (like TV resolution then have a resolution for each TV, but the next product may not be a TV and not have "TV resolution"). How do you store them, search efficiently, and allow your users to setup product types with variable fields describing their products? If the search engine finds that customers typically search for TVs based on console depth, you could add console depth to your fields, then add a single depth for each tv product type at run time. There is a nice common feature among good e-commerce apps where they show a set of products, then have "drill down" side menus where you can see "TV Resolution" as a header, and the top five most common TV Resolutions for the found set. You click one and it only shows TVs of that resolution, allowing you to further drill down by selecting other categories on the side menu. These options would be the dynamic product attributes added at run time. Further discussion: So long story short, are there any links out on the Internet or model descriptions that could "academically" fix the following setup? I thank Noel Kennedy for suggesting a category table, but the need may be greater than that. I describe it a different way below, trying to highlight the significance. I may need a viewpoint correction to solve the problem, or I may need to go deeper in to the EAV/CR. Love the positive response to the EAV/CR model. My fellow developers all say what Jeffrey Kemp touched on below: "new entities must be modeled and designed by a professional" (taken out of context, read his response below). The problem is: entities add and remove attributes weekly (search keywords dictate future attributes) new entities arrive weekly (products are assembled from parts) old entities go away weekly (archived, less popular, seasonal) The customer wants to add attributes to the products for two reasons: department / keyword search / comparison chart between like products consumer product configuration before checkout The attributes must have significance, not just a keyword search. If they want to compare all cakes that have a "whipped cream frosting", they can click cakes, click birthday theme, click whipped cream frosting, then check all cakes that are interesting knowing they all have whipped cream frosting. This is not specific to cakes, just an example.

    Read the article

  • Perl DBD::DB2 installation failed

    - by prabhu
    Hi, We dont have root access in our local machine. I installed DBI package first and then installed DBD package. I got the below error first, In file included from DB2.h:22, from DB2.xs:7: dbdimp.h:10:22: dbivport.h: No such file or directory Then I included the DBI path in the Makefile and then I am getting the below error. DB2.xs: In function `XS_DBD__DB2__db_disconnect': DB2.xs:128: error: structure has no member named `_old_cached_kids' DB2.xs:129: error: structure has no member named `_old_cached_kids' DB2.xs:130: error: structure has no member named `_old_cached_kids' DB2.xs: In function `XS_DBD__DB2__db_DESTROY': DB2.xs:192: error: structure has no member named `_old_cached_kids' DB2.xs:193: error: structure has no member named `_old_cached_kids' DB2.xs:194: error: structure has no member named `_old_cached_kids' The versions I am trying to install are DBI-1.610_90.tar.gz DBD-DB2-1.78.tar.gz I am using perl Makefile.PL PREFIX=/home/prabhu/perl_pm/lib The output for perl -V is as follows: Summary of my perl5 (revision 5 version 8 subversion 5) configuration: Platform: osname=linux, osvers=2.4.21-27.0.2.elsmp, archname=i386-linux-thread-multi uname='linux decompose.build.redhat.com 2.4.21-27.0.2.elsmp #1 smp wed jan 12 23:35:44 est 2005 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -Dversion=5.8.5 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dinc_version_list=5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' hint=recommended, useposix=true, d_sigaction=define usethreads=define use5005threads=undef useithreads=define usemultiplicity=define useperlio=define d_sfio=undef uselargefiles=define usesocks=undef use64bitint=undef use64bitall=undef uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', optimize='-O2 -g -pipe -m32 -march=i386 -mtune=pentium4', cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='3.4.4 20050721 (Red Hat 3.4.4-2)', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=4, prototype=define Linker and Libraries: ld='gcc', ldflags =' -L/usr/local/lib' libpth=/usr/local/lib /lib /usr/lib libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc libc=/lib/libc-2.3.4.so, so=so, useshrplib=true, libperl=libperl.so gnulibc_version='2.3.4' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE' cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib' Characteristics of this binary (from libperl): Compile-time options: DEBUGGING MULTIPLICITY USE_ITHREADS USE_LARGE_FILES PERL_IMPLICIT_CONTEXT Built under linux Compiled at Aug 2 2005 04:48:47 %ENV: PERL5LIB=":/opt/india/dev/perl/XML-XPath-1.13/lib/perl5:/opt/india/dev/perl/XML-XPath- 1.13/lib/perl5/site_perl:/opt/india/dev/perl/XML-XPath-1.13/lib/perl5:/opt/india/dev/perl/XML-XPath-1.13/lib/perl5/site_perl" Could anyone help me to resolve this issue? Appreciate help in advance. Prabhu

    Read the article

  • asp.net CustomValidator never fires OnServerValidate

    - by Bryce Fischer
    I have the following ASP page: <asp:Content ID="Content2" ContentPlaceHolderID="ShellContent" runat="server"> <form runat="server" id="AddNewNoteForm" method="post""> <fieldset id="NoteContainer"> <legend>Add New Note</legend> <asp:ValidationSummary ID="ValidationSummary1" runat="server" /> <div class="ctrlHolder"> <asp:Label ID="LabelNoteDate" runat="server" Text="Note Date" AssociatedControlID="NoteDateTextBox"></asp:Label> <asp:TextBox ID="NoteDateTextBox" runat="server" class="textInput" CausesValidation="True" ></asp:TextBox> <asp:CustomValidator ID="CustomValidator1" runat="server" ErrorMessage="CustomValidator" ControlToValidate="NoteDateTextBox" OnServerValidate="CustomValidator1_ServerValidate" Display="Dynamic" >*</asp:CustomValidator> </div> <div class="ctrlHolder"> <asp:Label ID="LabelNoteText" AssociatedControlID="NoteTextTextBox" runat="server" Text="Note"></asp:Label> <asp:TextBox ID="NoteTextTextBox" runat="server" Height="102px" TextMode="MultiLine" class="textInput" ></asp:TextBox> <asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server" ErrorMessage="Note Text is Required" ControlToValidate="NoteTextTextBox">*</asp:RequiredFieldValidator> </div> <div class="buttonHolder"> <asp:Button ID="OkButton" runat="server" Text="Add New Note" CssClass="primaryAction" onclick="OkButton_Click"/> <asp:HyperLink ID="HyperLink1" runat="server">Cancel</asp:HyperLink> </div> </fieldset> </form> </asp:Content> and the following code behind for the CustomValidator1_ServerValidate() method: protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) { if (string.IsNullOrEmpty(args.Value.Trim())) { args.IsValid = false; CustomValidator1.ErrorMessage = "Note Date is Required!"; return; } DateTime testDate; if (DateTime.TryParse(args.Value, out testDate)) { args.IsValid = true; CustomValidator1.ErrorMessage = "Invalid Date!"; } } It never seems to fail validation no matter what I put in the text box... Should mention this is ASP.NET 2.0

    Read the article

  • Tridion Installation

    - by Kevin Brydon
    I am currently upgrading an installation of Tridion from 5.3 to 2011 starting almost from scratch (aside from migrating the database), brand new virtual servers. I just want to ask for some advice on my current server setup... a sanity check. All servers are running Windows Server 2008. The pages on our website are all classic ASP. Database SQL Server cluster. The 5.3 database has been migrated using the DatabaseManager. This is pretty standard and works well (in test anyway). Content Manager A single server to run the Content Manager and the Publisher. There are around 10 people using it at any one time so not under a particularly heavy load. Content Data Store Filesystem located somewhere on the network. One directory for live and one for staging. Content Delivery Two servers (cd1 and cd2) each with the the following server roles installed. cd1 writes to a filesystem content data store for the live website, cd2 writes to the content data store for the staging website. Presentation Two public facing web servers (web1 and web2) serving both the live and staging websites. The web servers read directly from the content data store as its a filesystem. Each of the web servers have the Content Delivery Server installed so that I can use dynamic linking (and other features?). I've so far set up everything but the web servers. Any thoughts? edit Thanks to Ram S who linked me to a decent walkthrough, upvoted. I suppose I should have posed some questions as I didn't really ask a question. I guess I'm a little confused over the content deliver aspect. I have the Content Delivery split in two separate parts. cd1 and cd2 do the work of shifting information from the Content Manager to the Staging/Live web directories. web1 and web2 should do the work of serving the web pages to the outside world and will interact with the content data store (file system). Is this a correct setup? I need some parts of the Content Delivery on my web servers right? Theoretically I could get rid of the cd1 and cd2 servers and use web1 and web2 to do the deployment right? But I suspect this will put the web servers under unnecessary strain should there ever be a big publish. I've been reading the 2011 Installation Manual, Content Delivery section, and I'm finding it quite hard to get my head around!

    Read the article

  • VBA - Access 03 - Iterating through a list box, with an if statement to evaluate

    - by Justin
    So I have a one list box with values like DeptA, DeptB, DeptC & DeptD. I have a method that causes these to automatically populate in this list box if they are applicable. So in other words, if they populate in this list box, I want the resulting logic to say they are "Yes" in a boolean field in the table. So to accomplish this I am trying to use this example of iteration to cycle through the list box first of all, and it works great: dim i as integer dim myval as string For i = o to me.lstResults.listcount - 1 myVal = lstResults.itemdata(i) Next i if i debug.print myval, i get the list of data items that i want from the list box. so now i am trying to evaluate that list so that I can have an UPDATE SQL statement to update the table as i need it to be done. so, i know this is a mistake, but this is what i tried to do (giving it as an example so that you can see what i am trying to get to here) dim sql as string dim i as integer dim myval as string dim db as database sql = "UPDATE tblMain SET " for i = 0 to me.lstResults.listcount - 1 myval = lstResults.itemdata(i) If MyVal = "DeptA" Then sql = sql & "DeptA = Yes" ElseIF myval = "DeptB" Then sql = sql & "DeptB = Yes" ElseIf MyVal = "DeptC" Then sql = sql & "DeptC = Yes" ElseIf MyVal = "DeptD" Then sql = sql & "DeptD = Yes" End If Next i debug.print (sql) sql = sql & ";" set db= currentdb db.execute(sql) msgbox "Good Luck!" So you can see why this is going to cause problems because the listbox that these values (DeptA, DeptB, etc) automatically populate in are dynamic....there is rarely one value in the listbox, and the list of values changes per OrderID (what the form I am using this on populates information for in the first place; unique instance). I am looking for something that will evaluate this list one at a time (i.e. iterate through the list of values, and look for "DeptA", and if it is found add yes to the SQL string, and if it not add no to the SQL string, then march on to the next iteration). Even though the listbox populates values dynamically, they are set values, meaning i know what could end up in it. Thanks for any help, Justin

    Read the article

  • Does weak typing offer any advantages?

    - by sub
    Don't confuse this with static vs. dynamic typing! You all know JavaScripts/PHPs infamous type systems: PHP example: echo "123abc"+2; // 125 - the reason for this is explained // in the PHP docs but still: This hurts echo "4"+1; // 5 - Oh please echo "ABC"*5; // 0 - WTF // That's too much, seriously now. // This here might be actually a use for weak typing, but no - // it has to output garbage. JavaScript example: // A good old JavaScript, maybe you'll do better? alert("4"+1); // 51 - Oh come on. alert("abc"*3); // NaN - What the... // Have your creators ever heard of the word "consistence"? Python example: # Python's type system is actually a mix # It spits errors on senseless things like the first example below AND # allows intelligent actions like the second example. >>> print("abc"+1) Traceback (most recent call last): File "<pyshell#2>", line 1, in <module> print("abc"+1) TypeError: Can't convert 'int' object to str implicitly >>> print("abc"*5) abcabcabcabcabc Ruby example: puts 4+"1" // Type error - as supposed puts "abc"*4 // abcabcabcabc - makes sense After these examples it should be clear that PHP/JavaScript probably have the most inconsistent type systems out there. This is a fact and really not subjective. Now when having a closer look at the type systems of Ruby and Python it seems like they are having a much more intelligent and consistent type system. I think these examples weren't really necessary as we all know that PHP/JavaScript have a weak and Python/Ruby have a strong type system. I just wanted to mention why I'm asking this. Now I have two questions: When looking at those examples, what are the advantages of PHPs and JavaScripts type systems? I can only find downsides: They are inconsistent and I think we know that this is not good Types conversions are hardly controllable Bugs are more likely to happen and much harder to spot Do you prefer one of the both systems? Why? Personally I have worked with PHP, JavaScript and Python so far and must say that Pythons type system has really only advantages over PHPs and JavaScripts. Does anybody here not think so? Why then?

    Read the article

  • Succinct introduction to C++/CLI for C#/Haskell/F#/JS/C++/... programmer

    - by Henrik
    Hello everybody, I'm trying to write integrations with the operating system and with things like active directory and Ocropus. I know a bunch of programming languages, including those listed in the title. I'm trying to learn exactly how C++/CLI works, but can't find succinct, exact and accurate descriptions online from the searching that I have done. So I ask here. Could you tell me the pitfalls and features of C++/CLI? Assume I know all of C# and start from there. I'm not an expert in C++, so some of my questions' answers might be "just like C++", but could say that I am at C#. I would like to know things like: Converting C++ pointers to CLI pointers, Any differences in passing by value/doubly indirect pointers/CLI pointers from C#/C++ and what is 'recommended'. How do gcnew, __gc, __nogc work with Polymorphism Structs Inner classes Interfaces The "fixed" keyword; does that exist? Compiling DLLs loaded into the kernel with C++/CLI possible? Loaded as device drivers? Invoked by the kernel? What does this mean anyway (i.e. to load something into the kernel exactly; how do I know if it is?)? L"my string" versus "my string"? wchar_t? How many types of chars are there? Are we safe in treating chars as uint32s or what should one treat them as to guarantee language indifference in code? Finalizers (~ClassName() {}) are discouraged in C# because there are no garantuees they will run deterministically, but since in C++ I have to use "delete" or use copy-c'tors as to stack allocate memory, what are the recommendations between C#/C++ interactions? What are the pitfalls when using reflection in C++/CLI? How well does C++/CLI work with the IDisposable pattern and with SafeHandle, SafeHandleZeroOrMinusOneIsInvalid? I've read briefly about asynchronous exceptions when doing DMA-operations, what are these? Are there limitations you impose upon yourself when using C++ with CLI integration rather than just doing plain C++? Attributes in C++ similar to Attributes in C#? Can I use the full meta-programming patterns available in C++ through templates now and still have it compile like ordinary C++? Have you tried writing C++/CLI with boost? What are the optimal ways of interfacing the boost library with C++/CLI; can you give me an example of passing a lambda expression to an iterator/foldr function? What is the preferred way of exception handling? Can C++/CLI catch managed exceptions now? How well does dynamic IL generation work with C++/CLI? Does it run on Mono? Any other things I ought to know about?

    Read the article

  • Succinct introduction to C++/CLI for C#/Haskell/F#/JS/C++/... programmer

    - by Henrik
    Hello everybody, I'm trying to write integrations with the operating system and with things like active directory and Ocropus. I know a bunch of programming languages, including those listed in the title. I'm trying to learn exactly how C++/CLI works, but can't find succinct, exact and accurate descriptions online from the searching that I have done. So I ask here. Could you tell me the pitfalls and features of C++/CLI? Assume I know all of C# and start from there. I'm not an expert in C++, so some of my questions' answers might be "just like C++", but could say that I am at C#. I would like to know things like: Converting C++ pointers to CLI pointers, Any differences in passing by value/doubly indirect pointers/CLI pointers from C#/C++ and what is 'recommended'. How do gcnew, __gc, __nogc work with Polymorphism Structs Inner classes Interfaces The "fixed" keyword; does that exist? Compiling DLLs loaded into the kernel with C++/CLI possible? Loaded as device drivers? Invoked by the kernel? What does this mean anyway (i.e. to load something into the kernel exactly; how do I know if it is?)? L"my string" versus "my string"? wchar_t? How many types of chars are there? Are we safe in treating chars as uint32s or what should one treat them as to guarantee language indifference in code? Finalizers (~ClassName() {}) are discouraged in C# because there are no garantuees they will run deterministically, but since in C++ I have to use "delete" or use copy-c'tors as to stack allocate memory, what are the recommendations between C#/C++ interactions? What are the pitfalls when using reflection in C++/CLI? How well does C++/CLI work with the IDisposable pattern and with SafeHandle, SafeHandleZeroOrMinusOneIsInvalid? I've read briefly about asynchronous exceptions when doing DMA-operations, what are these? Are there limitations you impose upon yourself when using C++ with CLI integration rather than just doing plain C++? Attributes in C++ similar to Attributes in C#? Can I use the full meta-programming patterns available in C++ through templates now and still have it compile like ordinary C++? Have you tried writing C++/CLI with boost? What are the optimal ways of interfacing the boost library with C++/CLI; can you give me an example of passing a lambda expression to an iterator/foldr function? What is the preferred way of exception handling? Can C++/CLI catch managed exceptions now? How well does dynamic IL generation work with C++/CLI? Does it run on Mono? Any other things I ought to know about?

    Read the article

  • How do you make a CSS-defined table-cell scroll?

    - by Giffyguy
    I want to be able to set the height of the table, and force the cells to scroll individually if they are larger than the table. Consider the following code: (see it in action here) <div style="display: table; position: absolute; width: 25%; height: 80%; min-height: 80%; max-height: 80%; left: 0%; top: 10%; right: 75%; bottom: 10%; border: solid 1px black;"> <div style="display: table-row;"> <div style="display: table-cell; border: solid 1px blue;"> {Some dynamic text content}<br/> This cell should shrink to fit it's contents. </div> </div> <div style="display: table-row;"> <div style="display: table-cell; border: solid 1px red; overflow: scroll;"> This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. </div> </div> </div> If you open this code (in IE8, in my case) you'll notice that the second cell fits in the table nicely when the browser is maximized. In theory, when you shrink the browser (forcing the table to shrink as well), a vertical scrollbar should appear INSIDE the second cell when the table becomes too small to fit all of the content. But in reality, the table just grows vertically, beyond the bounds set by the CSS height attribute(s). Hopefully I've explained this scenario adequately... Does anyone know how I can get this to work?

    Read the article

  • How do you make a CSS-defined table-cell scroll?

    - by Giffyguy
    I want to be able to set the height of the table, and force the cells to scroll individually if they are larger than the table. Consider the following code: (see it in action here) <div style="display: table; position: absolute; width: 25%; height: 80%; min-height: 80%; max-height: 80%; left: 0%; top: 10%; right: 75%; bottom: 10%; border: solid 1px black;"> <div style="display: table-row;"> <div style="display: table-cell; border: solid 1px blue;"> {Some dynamic text content}<br/> This cell should shrink to fit it's contents. </div> </div> <div style="display: table-row;"> <div style="display: table-cell; border: solid 1px red; overflow: scroll;"> This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. This should only take up the remainder of the table's vertical space. </div> </div> </div> If you open this code (in IE8, in my case) you'll notice that the second cell fits in the table nicely when the browser is maximized. In theory, when you shrink the browser (forcing the table to shrink as well), a vertical scrollbar should appear INSIDE the second cell when the table becomes too small to fit all of the content. But in reality, the table just grows vertically, beyond the bounds set by the CSS height attribute(s). Hopefully I've explained this scenario adequately... Does anyone know how I can get this to work?

    Read the article

  • Creating an XML sitemap with PHP

    - by iMaster
    I'm trying to create a sitemap that will automatically update. I've done something similiar with my RSS feed, but this sitemap refuses to work. You can view it live at http://designdeluge.com/sitemap.xml I think the main problem is that its not recognizing the PHP code. Here's the full source: <?php header('Content-type: text/xml'); ?> <?xml version="1.0" encoding="UTF-8" ?> <urlset xmlns="http://www.google.com/schemas/sitemap/0.84" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.google.com/schemas/sitemap/0.84 http://www.google.com/schemas/sitemap/0.84/sitemap.xsd"> <url> <loc>http://www.designdeluge.com/</loc> <lastmod>2010-04-29</lastmod> <changefreq>daily</changefreq> <priority>1.00</priority> </url> <url> <loc>http://www.designdeluge.com/archives</loc> <lastmod>2010-04-29</lastmod> <changefreq>daily</changefreq> <priority>0.5</priority> </url> <url> <loc>http://www.designdeluge.com/about.php</loc> <lastmod>2010-04-29</lastmod> <changefreq>daily</changefreq> <priority>0.5</priority> </url> <?php include 'connection.php'; $entries = mysql_query("SELECT * FROM Entries ORDER BY timestamp DESC"); while($row = mysql_fetch_array($entries)) { $title = stripslashes($row['title']); $date = date("Y-m-d", strtotime($row['timestamp'])); ?> <url> <loc>http://www.designdeluge.com/<?php echo $row['title']; ?></loc> <lastmod><?php echo $date; ?></lastmod> <changefreq>none</changefreq> <priority>0.5</priority> </url> <?php } ?> </urlset> The problem is that the dynamic URL's (e.g. the ones pulled from the DB) aren't being generated and the sitemap won't validate. Thanks!

    Read the article

  • SignalR recording when a Web Page has closed

    - by Benjamin Rogers
    I am using MassTransit request and response with SignalR. The web site makes a request to a windows service that creates a file. When the file has been created the windows service will send a response message back to the web site. The web site will open the file and make it available for the users to see. I want to handle the scenario where the user closes the web page before the file is created. In that case I want the created file to be emailed to them. Regardless of whether the user has closed the web page or not, the message handler for the response message will be run. What I want to be able to do is have some way of knowing within the response message handler that the web page has been closed. This is what I have done already. It doesnt work but it does illustrate my thinking. On the web page I have $(window).unload(function () { if (event.clientY < 0) { // $.connection.hub.stop(); $.connection.exportcreate.setIsDisconnected(); } }); exportcreate is my Hub name. In setIsDisconnected would I set a property on Caller? Lets say I successfully set a property to indicate that the web page has been closed. How do I find out that value in the response message handler. This is what it does now protected void BasicResponseHandler(BasicResponse message) { string groupName = CorrelationIdGroupName(message.CorrelationId); GetClients()[groupName].display(message.ExportGuid); } private static dynamic GetClients() { return AspNetHost.DependencyResolver.Resolve<IConnectionManager>().GetClients<ExportCreateHub>(); } I am using the message correlation id as a group. Now for me the ExportGuid on the message is very important. That is used to identify the file. So if I am going to email the created file I have to do it within the response handler because I need the ExportGuid value. If I did store a value on Caller in my hub for the web page close, how would I access it in the response handler. Just in case you need to know. display is defined on the web page as exportCreate.display = function (guid) { setTimeout(function () { top.location.href = 'GetExport.ashx?guid=' + guid; }, 500); }; GetExport.ashx opens the file and returns it as a response. Thank you, Regards Ben

    Read the article

  • Rail test case fixtures not loading

    - by Deano
    Rails appears to not be loading any fixtures for unit or functional tests. I have a simple 'products.yml' that parses and appears correct: ruby: title: Programming Ruby 1.9 description: Ruby is the fastest growing and most exciting dynamic language out there. If you need to get working programs delivered fast, you should add Ruby to your toolbox. price: 49.50 image_url: ruby.png My controller functional test begins with: require 'test_helper' class ProductsControllerTest < ActionController::TestCase fixtures :products setup do @product = products(:one) @update = { :title => 'Lorem Ipsum' , :description => 'Wibbles are fun!' , :image_url => 'lorem.jpg' , :price => 19.95 } end According to the book, Rails should "magically" load the fixtures (as my test_helper.rb has fixtures :all in it. I also added the explicit fixtures load (seen above). Yes Rails complains: user @ host ~/Dropbox/Rails/depot > rake test:functionals (in /Somewhere/Users/user/Dropbox/Rails/depot) /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby -Ilib:test "/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/rake-0.8.3/lib/rake/rake_test_loader.rb" "test/functional/products_controller_test.rb" Loaded suite /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/rake-0.8.3/lib/rake/rake_test_loader Started EEEEEEE Finished in 0.062506 seconds. 1) Error: test_should_create_product(ProductsControllerTest): NoMethodError: undefined method `products' for ProductsControllerTest:Class /test/functional/products_controller_test.rb:7 2) Error: test_should_destroy_product(ProductsControllerTest): NoMethodError: undefined method `products' for ProductsControllerTest:Class /test/functional/products_controller_test.rb:7 ... I did come across the other Rails test fixture question http://stackoverflow.com/questions/1547634/rails-unit-testing-doesnt-load-fixtures, but that leads to a plugin issue (something to do with the order of loading fixtures). BTW, I am developing on Mac OS X 10.6 with Rail 2.3.5 and Ruby 1.8.7, no additional plugins (beyond the base install). Any pointers on how to debug, why the magic of Rails appears to be failing here? Is it a version problem? Can I trace code into the libraries and find the answer? There are so many "mixin" modules I can't find where the fixtures method really lives.

    Read the article

< Previous Page | 540 541 542 543 544 545 546 547 548 549 550 551  | Next Page >