Search Results

Search found 34341 results on 1374 pages for 'link local'.

Page 544/1374 | < Previous Page | 540 541 542 543 544 545 546 547 548 549 550 551  | Next Page >

• How can I verify the integrity of a WAN connection?

  - by Nic Waller

  We have two scanners in our branch office which upload images to the head office via FTP. In the last week, both scanners have started delivering a lot of corrupted images. I suspect that the problem may be with the WAN link, and that TCP might not be detecting/correcting all errors. Is there any software for Windows that allows me to test the integrity of the connection by sending packets with an embedded CRC?

  Read the article

• how to transfer files from desktop to server when using ssh

  - by Omnipresent

  I am using ssh to connect to a server. I want to upload local files to the server. Usually I do this by opening the 'New File Transfer Window' However, i'd like to just do this from the command prompt. what is the command to do this?

  Read the article

• Boot from USB at booting time win Windows 7

  - by MA1

  Hello Everyone hope you will be fine and good. 1) I need a tool/software that i can run from USB at boot time 2) How to boot the USB at booting time 3) and...how to run that progam/tool/software Actually, what i want to do is to copy some files from hardisk to USB at boot. Can anyone help...or point me to some useful link/book etc... Thanks.

  Read the article

• Is there an encrypted udp based tunnel that doesn't need a tun/tap device?

  - by kbyrd

  I am looking for a tunneling solution that behaves a similar to an ssl or ssh tunnel but over UDP. One the client end, OpenVPN provides an network interface. I want the client end to just listen on a local port and forward all that traffic over the tunnel it has established.

  Read the article

• Slow file copying/network browsing in Windows 7

  - by tomp

  The file copying on local discs and network shares, and browsing shared folders is much slower on the Windows 7 than it was on Windows XP. I'm sure everyone encountered this problem, I personally have seen it on many different computers. What would you recommend to speed up these operations?

  Read the article

• Connection closed by remote host

  - by kidrobot

  I'm trying to connect to a server using a private key generated through cPanel and stored on my local machine, but I am getting the "Connection closed by remote host". Any ideas? XXXXX-computer-2:~ XXXX$ ssh -v -i /path/to/private/key [email protected] OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to xxx.com XX.XX.XX.XX] port 22. debug1: Connection established. debug1: identity file /path/to/private/key type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• Postfix to deliver mail to a virtual address mailbox

  - by Chloe

  Postfix version 2.6.6, Dovecot Version 2.0.9 I want to setup Postfix + Dovecot. Dovecot seems to be working. I can authenticate. However, the mailbox is empty! Nothing will get delivered! I followed many tutorials on Postfix + Dovecot but they seem to want to complicate things by using Dovecot LDA or MySQL. I just want it to be very simple and having Postfix deliver to the virtual mail boxes are fine. I don't need MySQL either. I already set up a custom password file that Dovecot uses for authentication and I can login to POP3 with SSL. I can see from the logs that Postfix is delivering to the system user accounts (the catch-all), instead of the virtual users that I set up in Dovecot. The SMTP + SSL authentication seems to work also. I can also see from the logs that Dovecot is checking the correct virtual mail folder. I just need to figure out how to get Postfix to deliver to the virtual mail boxes. I have the following which I believe are relevant. Let me know what other settings you need to see: alias_maps = hash:/etc/aliases mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = xxx.com myhostname = mail.xxx.com mynetworks = 99.99.99.99, 99.99.99.99 myorigin = $mydomain relay_domains = $mydestination, xxx.com, domain2.net, domain3.com sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = reject_non_fqdn_sender reject_non_fqdn_recipient reject_unknown_recipient_domain permit_sasl_authenticated check_relay_domains smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = check_sender_mx_access cidr:/etc/postfix/bogus_mx reject_invalid_hostname reject_unknown_sender_domain reject_non_fqdn_sender virtual_mailbox_base = /var/spool/vmail virtual_mailbox_domains = xxx.com, domain2.net, domain3.com virtual_minimum_uid = 444 Postfix master.cf: submission inet n - - - - smtpd -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual -o smtpd_sender_restrictions=reject_sender_login_mismatch -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject Dovecot related: mail_location = maildir:~/Maildir passdb { args = /etc/dovecot/users.conf driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix } } The virtual mail user: vmail:x:444:99:virtual mail users:/var/spool/vmail:/sbin/nologin Here is the /var/log/maillog when I try to send something to myself: Oct 25 22:10:05 308321 postfix/smtpd[2200]: connect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:05 308321 postfix/smtpd[2200]: D224BD4753: client=user-999.cable.mindspring.com[99.99.99.99], sasl_method=LOGIN, [email protected] Oct 25 22:10:06 308321 postfix/cleanup[2207]: D224BD4753: message-id=<7DC3C163CFFC483AB6226F8D3D9969D2@dumbopc> Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: from=<[email protected]>, size=1385, nrcpt=1 (queue active) Oct 25 22:10:06 308321 postfix/smtpd[2200]: disconnect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:06 308321 postfix/local[2208]: D224BD4753: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=1.1, delays=0.53/0.02/0/0.51, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: removed

  Read the article

• Assign fixed IP address via DHCP by DNS lookup

  - by Janoszen

  Preface I'm building a virtualization environment with Ubuntu 14.04 and LXC. I don't want to write my own template since the upgrade from 12.04 to 14.04 has shown that backwards compatibility is not guaranteed. Therefore I'm deploying my virtual machines via lxc-create, using the default Ubuntu template. The DNS for the servers is provided by Amazon Route 53, so no local DNS server is needed. I also use Puppet to configure my servers, so I want to keep the manual effort on the deployment minimal. Now, the default Ubuntu template assigns IP addresses via DHCP. Therefore, I need a local DHCP server to assign IP addresses to the nodes, so I can SSH into them and get Puppet running. Since Puppet requires a proper DNS setup, assigning temporary IP addresses is not an option, the client needs to get the right hostname and IP address from the start. Question What DHCP server do I use and how do I get it to assign the IP address based only on the host-name DHCP option by performing a DNS lookup on that very host name? What I've tried I tried to make it work using the ISC DHCP server, however, the manual clearly states: Please be aware that only the dhcp-client-identifier option and the hardware address can be used to match a host declaration, or the host-identifier option parameter for DHCPv6 servers. For example, it is not possible to match a host declaration to a host-name option. This is because the host-name option cannot be guaranteed to be unique for any given client, whereas both the hardware address and dhcp-client-identifier option are at least theoretically guaranteed to be unique to a given client. I also tried to create a class that matches the hostname like this: class "my-client-name" { match if option host-name = "my-client-name"; fixed-address my-client-name.my-domain.com; } Unfortunately the fixed-address option is not allowed in class statements. I can replace it with a 1-size pool, which works as expected: subnet 10.103.0.0 netmask 255.255.0.0 { option routers 10.103.1.1; class "my-client-name" { match if option host-name = "my-client-name"; } pool { allow members of "my-client-name"; range 10.103.1.2 10.103.1.2; } } However, this would require me to administer the IP addresses in two places (Amazon Route53 and the DHCP server), which I would prefer not to do. About security Since this is only used in the bootstrapping phase on an internal network and is then replaced by a static network configuration by Puppet, this shouldn't be an issue from a security standpoint. I am, however, aware that the virtual machine bootstraps with "ubuntu:ubuntu" credentials, which I intend to fix once this is running.

  Read the article

• restrict views of custome list by group in sharepoint

  - by Crash893

  Im pretty new to sharepoint and what i would like to do is create a huge master list of all our employees and then make diffrent "views" on that person depending on the persons group for example a new employe might have sallery info security info personel info contract info i would like to have all that in on row (per employee) but then when someone from the hr group logs in they can only see personel and salery or something like that If that is not an option is there a way to link tables across different lists?

  Read the article

• Cygwin's RSYNC for large data transfer

  - by Tim Brigham

  I'm using rsync from Cygwin to do a large scale data transfer from an aging HP MSA 1000 to a new DAS attached to a different server. I have a daemon running on the remote server in read only mode and a local copy writing the files to disk. One of my servers is an image repository with over a million files spread across about 300 directories. Each file averages only a couple hundred kilobytes. More so than any other box this one is proving problematic. The rsync process will work for a while - some times 20 minutes, some times an hour - and then it simply quits and sits idle at a given file name. I have verified that the file isn't corrupt on the remote server and that the file is successfully created on the local drive. I ran the rsync client in -vv mode, which returns nothing. I checked out the logs created by the daemon. I looked at the network utilization on the interface, which is sitting idle. I looked at the AV settings to see if anything could pose a problem there. I even updated to the latest release of Cygwin. What do I need to in order to keep this connection up? EDIT: The client system is using the command rsync.exe server::Drives/f/Repo/ /cygdrive/T/Repo --archive -P -vv The server is using the command rsync.exe --daemon --no-detach --config "rsyncd.conf" The contents of rsyncd.conf: use chroot = false strict modes = false hosts allow = 192.168.100.9 log file = c:/rsyncd.log uid=0 gid=0 [Drives] path = /cygdrive read only = yes EDIT: The file server is 2003, the disk type on the array is GPT and the size is of the array is about 4 TB. EDIT: Stranger.. It looks like the process is reliably erroring out at about 175,000 files. Rsync runs fine when I pick the same directory it has problems with one at a time. EDIT: rsync version 3.0.9 protocol version 30 Copyright (C) 1996-2011 by Andrew Tridgell, Wayne Davison, and others. Web site: http://rsync.samba.org/ Capabilities: 64-bit files, 64-bit inums, 32-bit timestamps, 64-bit long ints, no socketpairs, hardlinks, symlinks, IPv6, batchfiles, inplace, append, ACLs, xattrs, iconv, symtimes A similar failure occurred when going from the same set of files with Cygwin to a Linux install. It didn't happen until several hours later than normal however.

  Read the article

• How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7?

  - by Timo

  The question says it all, but more detail follows ;) I've got a new computer that runs Windows 7 64-bits (Home Edition) and I'd like to connect it to my wireless home network (Sitecom wireless gigabit router 300N wl-352 v1 002) with a Sitecom wireless USB micro adaptapter 300 wl-352 V2 001. After installing the router (i.e. connected to the modem and power) and ensuring that wireless is indeed enabled, I've installed the driver of the USB adapter on the new computer described above. After the installation (drivers and utility on CD) completes successfull I rebooted my computer and inserted the USB adapter. After discovering the right network and connecting to it using the network key, a connection is succesfully made. (Using the Sitecom 300N USB Wireless LAN utility). In the LAN utility I can see that the signal strength is approximately 50% and connection quality is approximately 80%. Judging from these numbers I assumed that all was fine and started to use the connection (reading news on nu.nl, a dutch news site), but noticed that the connection was lost several times in a very short time span, but each time the connections was resumed, resulting in the 50/80 percent numbers described above. However, the website was not loaded completely and often a timeout would be reported. When inspecting the drivers through Device Management (Windows' Apparaatbeheer in dutch) there were no errors/warnings; everything seemed to be in order. In an attempt to solve this, I downloaded the latest drivers for the USB adapter, but the problems remained. Finally I tried to connect the computer with a Siemens Gigaset USB Adapter 108. This process was a troublesome since I had to download a driver (from the site above) and tell Windows (7) to use the Windows Vista driver when installing the new hardware, since there is (was) no Windows 7 driver available. This resulted in a usable connection, although not very stable when reconfiguring the router. Which took the form of selecting a different wireless channel on the router, even using the Sitecom utility mentioned above to check if there were other networks communicating on that channel (and thus picking a channel that was not used by other networks). Again no result when changing back to the Sitecom USB adapter. Note that this means (I think) that I could use the internet connection with the Siemens adapter, meaning the problem was not in the router. So: How to get wireless working (properly) with Sitecom Wireless USB micro adapter 300N on Windows 7? PS Sorry, but should be able to post one link, while I had links in place for the USB adapter, router and the siemens adapter in place as well, but I'm not (yet) allowed to post these... (The site says I can post one link, but only when no links are present will it allow me to post the question...)

  Read the article

• ApacheBench on Plesk managed server?

  - by ropstah

  How can I call ApacheBench on my server which is managed by Plesk? I have no idea on which URL to enter. I understand that it needs a local address, but which address should I use? ab -c 10 -t 60 http://xxxxxx

  Read the article

• Trying to change a ubuntu user's password, Authentication token manipulation err

  - by beagleguy

  hey all, I'm trying to create a local user on a new ubuntu box my admin set up. I'm unable to change the password, I keep getting the error below. The user gets added to the shadow file but I can't get it to set a password. Any ideas? I've googled for over an hour :( thanks! admin@theserver:~$ sudo useradd jamz [sudo] password for admin: admin@theserver:~$ sudo passwd jamz passwd: Authentication token manipulation error passwd: password unchanged admin@theserver:~$

  Read the article

• Why version of my Darwin is 10.3, while I have Mac OS 10.6?

  - by Vincenzo

  This is what I see on my Mac: $ uname -a Darwin be-2.local 10.3.0 Darwin Kernel Version 10.3.0: Fri Feb 26 11:58:09 PST 2010; root:xnu-1504.3.12~1/RELEASE_I386 i386 I have Mac OS X 10.6.3. Why the kernel is of version 10.3? And how can I upgrade it? Thanks.

  Read the article

• pam auth via winbind, howto map primary group for users?

  - by dr gonzo

  I have unix users authenticating to an PDC (via winbind) and want to have the primary group of those users a local unix group (e.g. www-data). users have the group "domain users" with gid 10006 (as the gid winbind mapping) idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum groups = yes winbind enum users = yes winbind use default domain = yes winbind nested groups = yes but want that the primary group is 33 for all users (www-data) how to achieve that?

  Read the article

• Descending list ordered by file modification time

  - by LanceBaynes

  How can I generate a list of files in a directory [for example, "/mnt/hdd/PUB/"] ordered by the files modification time? [in descending order, the oldest modified file is at the lists end] ls -A -lRt would be great: https://pastebin.com/raw.php?i=AzuSVmrJ But if a file is changed in a directory, it lists the full directory, so the pastebined link isn't good [I don't want a list ordered by "directories", I need a "per file" ordered list] OS: OpenWrt [no Perl - not enough space for it :( + no "stat", or "file" command].

  Read the article

• Linux user authentication with Microsoft LDAP

  - by TusharG

  I'm trying to do following things: Login to CentOS over ssh: authentication needs to happen with Microsoft Ldap On successful login create a home directory for user in /home if directory exists take him to his home directory Put quota on /home/user directory of 5 GB Can someone please show me a link for Centos/redhat to authorize users with Microsoft Ldap? I have already tried: setup command from root - "Authentication configuration" - "[] User Information - Use Ldap" - Authentication - [] Use Ldap Authentication" - []/[*] Use TLS - Server: ldap://corporate.company.com - Base DN: dc=corporate,dc=company,dc=com" This does not authentication users with Microsoft LDAP

  Read the article

• Reserve internet connection.

  - by amouniverso

  I have the router D-link 804HV that have 20mbit\s internet via PPoE tunnel . It connect three PC with Windows Xp to my home net. One of three my PC have reserve stability wi-fi internet connection. How can I use the wi-fi connection as reserve if the router connection is not available? I try to set the Wi-fi PC as gate for the other two, but it's not working.

  Read the article

• Internal Server Error issue with Codeigniter. Cant open linked page

  - by Adam Perlis

  Hi I am VERY new to backend development. I am trying to setup a User Registration using Codeigniter. I have gotten pretty far but for some reason I can get the "Create Account button working. I have my site up and running on t-mrkt.com/mycisite would you guys mind taking a look and seeing where I might be going wrong? Here is a link to my files: https://www.dropbox.com/sh/z54j4qd50yf3t0p/MnnghGBB_D Thanks for your help! Adam

  Read the article

• What kind of paralell cable is this?

  - by rodey

  I have an HP LaserJet 4600 and need to order a replacement cable for it. Here is a picture of the port on the printer and the cable is currently in use. I've never seen one of this style before. Can anyone provide the type of port this is or a provide a link to a replacement cable? Thanks!

  Read the article

• Ubuntu 9.10 Internet not working

  - by Mr. Man

  I am using a BlueProton USB wireless network adapter and an Ubuntu 9.10 machine and the machine says that it is connected to the internet but it won't see other machines/devices on the local network and only a few websites work.

  Read the article

• VIM "upgraded" to expandtab and tabstop=8 on Python files

  - by dotancohen

  After reinstalling my OS from Kubuntu 12.10 to Kubuntu 14.04, VIM has changed its behaviour when editing Python files. Though before the reinstall all file types had noexpandtab and tabstop=4 set, now in Python those values are expandtab and tabstop=8, checked also via VIM behaviour and also via asking VIM set foo?. Non-Python files retain the noexpandtab and tabstop=4 behaviour that I prefer. The .vim direcotry and .vimrc were not touched during the reinstall. It can be seen that no files in .vimrc have been touched in months (with the exception of the irrelevant .netrwhist): - bruno():~$ ls -lat ~/.vim total 68 drwxr-xr-x 85 dotancohen dotancohen 12288 Aug 25 13:00 .. drwxr-xr-x 12 dotancohen dotancohen 4096 Aug 21 11:11 . -rw-r--r-- 1 dotancohen dotancohen 268 Aug 21 11:11 .netrwhist drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 plugin drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 doc drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 syntax drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 ftplugin drwxr-xr-x 4 dotancohen dotancohen 4096 Nov 29 2013 autoload drwxrwxr-x 5 dotancohen dotancohen 4096 May 27 2013 after drwxr-xr-x 2 dotancohen dotancohen 4096 Nov 1 2012 spell -rw------- 1 dotancohen dotancohen 138 Aug 14 2012 .directory -rw-rw-r-- 1 dotancohen dotancohen 190 Jul 3 2012 .VimballRecord drwxrwxr-x 2 dotancohen dotancohen 4096 May 12 2012 colors drwxrwxr-x 2 dotancohen dotancohen 4096 Mar 16 2012 mytags drwxrwxr-x 2 dotancohen dotancohen 4096 Feb 14 2012 keymap Though .vimrc has been touched since the reinstall, it was only me testing to see where the problem is. How can I tell what is settingexpandtab and tabstop? Side note: I'm not even sure what I should read in the built-in help for this issue. I started with ":h plugin" but that did not help other than showing me that the following plugins are loaded (possibly relevant): standard-plugin-list Standard plugins pi_getscript.txt Downloading latest version of Vim scripts pi_gzip.txt Reading and writing compressed files pi_netrw.txt Reading and writing files over a network pi_paren.txt Highlight matching parens pi_tar.txt Tar file explorer pi_vimball.txt Create a self-installing Vim script pi_zip.txt Zip archive explorer LOCAL ADDITIONS: local-additions DynamicSigns.txt - Using Signs for different things NrrwRgn.txt A Narrow Region Plugin (similar to Emacs) fugitive.txt A Git wrapper so awesome, it should be illegal indent-object.txt Text objects based on indent levels. taglist.txt Plugin for browsing source code vimwiki.txt A Personal Wiki for Vim

  Read the article

• How do I configure dual WAN links for failover on a Cisco 891?

  - by Donjo

  I have a Cisco 891 that is going to be connected to 2 WAN links, a DSL connection and a cable connection. I'm not so concerned with load balancing between them because the DSL connection speed is a drop in the bucket when compared to the cable speed though it would be nice if it worked that way. I mainly just want to force all traffic through the cable WAN link unless it goes down. I'm not really sure what feature set I should be researching.

  Read the article

• How to do a quick find with forward slash in Chrome?

  - by Ton van den Heuvel

  In Firefox forward slash is mapped to quick find. Is it possible to let forward slash behave the same in Google Chrome as in Firefox? To find a link and follow it in a page in Google Chrome I now have to type: Ctrl + F, <search query>, ESC, Enter In Firefox this is: /, <search query>, Enter Not being able to use forward slash to find in page has been a real show-stopper for me as I use it all the time in Firefox to browse documentation.

  Read the article

• Separate zone exceptions for each view in BIND

  - by Stefan M

  Problem: Separate zones by query source network and return different records for LAN clients compared to WAN clients. I've implemented this at home on a small alix router with Bind 9.4. One view called "lan" and one view called "wan". The "lan" view had just the root.hints file and one zone. The "wan" view had many other zones, including a copy of the one zone from the "lan" view, but with different records. Querying domain1.tld from the LAN would give me local records. Querying domain1.tld from the WAN would give me external records. Querying domain2.tld from the LAN would give me the same records as from the WAN as it only existed in the WAN view. Now I'm trying to re-implement this on a larger scale and suddenly my view is unable to query anything outside itself. This is natural according to the bind-users list and they suggest I copy all my views into my LAN view. I'm hoping someone here has a better solution because that means I'll have to copy, and maintain, thousands of zone files in multiple views. This is unfeasible. My configuration at home resembles this. acl lanClients { 192.168.22.0/24; 127.0.0.1; }; view "intranet" { match-clients { lanClients; }; recursion yes; notify no; // Standard zones // zone "." { type hint; file "etc/root.hint"; }; zone "domain1.tld" { type master; file "intranet/domain1.tld"; }; }; view "internet" { match-clients { !localnets; any; }; recursion no; allow-transfer { slaveDNS; }; include "master.zones"; }; Requests from the LAN for domain1.tld give local records, requests from the WAN give remote records. This works fine both at home and in my new Bind 9.7 on a larger scale. The difference is that at home I have somehow managed to make my LAN get remote records from domains in master.zones, without specifying those zones as duplicates in the "intranet" view. Trying this on a larger scale with Bind 9.7 I get no results at all except for the zones specified in the view. What am I missing? I've tried the same configuration for Bind 9.7.

  Read the article

< Previous Page | 540 541 542 543 544 545 546 547 548 549 550 551  | Next Page >