Search Results

Search found 14797 results on 592 pages for 'gui testing'.

Page 546/592 | < Previous Page | 542 543 544 545 546 547 548 549 550 551 552 553  | Next Page >

• Explaining Explain Plan Notes for Auto DOP

  - by jean-pierre.dijcks

  I've recently gotten some questions around "why do I not see a parallel plan" while Auto DOP is on (I think)...? It is probably worthwhile to quickly go over some of the ways to find out what Auto DOP was thinking. In general, there is no need to go tracing sessions and look under the hood. The thing to start with is to do an explain plan on your statement and to look at the parameter settings on the system. Parameter Settings to Look At First and foremost, make sure that parallel_degree_policy = AUTO. If you have that parameter set to LIMITED you will not have queuing and we will only do the auto magic if your objects are set to default parallel (so no degree specified). Next you want to look at the value of parallel_degree_limit. It is typically set to CPU, which in default settings equates to the Default DOP of the system. If you are testing Auto DOP itself and the impact it has on performance you may want to leave it at this CPU setting. If you are running concurrent statements you may want to give this some more thoughts. See here for more information. In general, do stick with either CPU or with a specific number. For now avoid the IO setting as I've seen some mixed results with that... In 11.2.0.2 you should also check that IO Calibrate has been run. Best to simply do a: SQL> select * from V$IO_CALIBRATION_STATUS; STATUS        CALIBRATION_TIME ------------- ---------------------------------------------------------------- READY         04-JAN-11 10.04.13.104 AM You should see that your IO Calibrate is READY and therefore Auto DOP is ready. In any case, if you did not run the IO Calibrate step you will get the following note in the explain plan: Note -----    - automatic DOP: skipped because of IO calibrate statistics are missing One more note on calibrate_io, if you do not have asynchronous IO enabled you will see:  ERROR at line 1: ORA-56708: Could not find any datafiles with asynchronous i/o capability ORA-06512: at "SYS.DBMS_RMIN", line 463 ORA-06512: at "SYS.DBMS_RESOURCE_MANAGER", line 1296 ORA-06512: at line 7 While this is changed in some fixes to the calibrate procedure, you should really consider switching asynchronous IO on for your data warehouse. Explain Plan Explanation To see the notes that are shown and explained here (and the above little snippet ) you can use a simple explain plan mechanism. There should  be no need to add +parallel etc. explain plan for <statement> SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY()); Auto DOP The note structure displaying why Auto DOP did not work (with the exception noted above on IO Calibrate) is like this: Automatic degree of parallelism is disabled: <reason> These are the reason codes: Parameter -  parallel_degree_policy = manual which will not allow Auto DOP to kick in  Hint - One of the following hints are used NOPARALLEL, PARALLEL(1), PARALLEL(MANUAL) Outline - A SQL outline of an older version (before 11.2) is used SQL property restriction - The statement type does not allow for parallel processing Rule-based mode - Instead of the Cost Based Optimizer the system is using the RBO Recursive SQL statement - The statement type does not allow for parallel processing pq disabled/pdml disabled/pddl disabled - For some reason (alter session?) parallelism is disabled Limited mode but no parallel objects referenced - your parallel_degree_policy = LIMITED and no objects in the statement are decorated with the default PARALLEL degree. In most cases all objects have a specific degree in which case Auto DOP will honor that degree. Parallel Degree Limited When Auto DOP does it works you may see the cap you imposed with parallel_degree_limit showing up in the note section of the explain plan: Note -----    - automatic DOP: Computed Degree of Parallelism is 16 because of degree limit This is an obvious indication that your are being capped for this statement. There is one quite interesting one that happens when you are being capped at DOP = 1. First of you get a serial plan and the note changes slightly in that it does not indicate it is being capped (we hope to update the note at some point in time to be more specific). It right now looks like this: Note -----    - automatic DOP: Computed Degree of Parallelism is 1 Dynamic Sampling With 11.2.0.2 you will start seeing another interesting change in parallel plans, and since we are talking about the note section here, I figured we throw this in for good measure. If we deem the parallel (!) statement complex enough, we will enact dynamic sampling on your query. This happens as long as you did not change the default for dynamic sampling on the system. The note looks like this: Note ----- - dynamic sampling used for this statement (level=5)

  Read the article

• How to label a cuboid?

  - by usha

  Hi this is how my 3dcuboid looks, I have attached the complete code. I want to label this cuboid using different names across sides, how is this possible using opengl on android? public class MyGLRenderer implements Renderer { Context context; Cuboid rect; private float mCubeRotation; // private static float angleCube = 0; // Rotational angle in degree for cube (NEW) // private static float speedCube = -1.5f; // Rotational speed for cube (NEW) public MyGLRenderer(Context context) { rect = new Cuboid(); this.context = context; } public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glLoadIdentity(); // Reset the model-view matrix gl.glTranslatef(0.2f, 0.0f, -8.0f); // Translate right and into the screen gl.glScalef(0.8f, 0.8f, 0.8f); // Scale down (NEW) gl.glRotatef(mCubeRotation, 1.0f, 1.0f, 1.0f); // gl.glRotatef(angleCube, 1.0f, 1.0f, 1.0f); // rotate about the axis (1,1,1) (NEW) rect.draw(gl); mCubeRotation -= 0.15f; //angleCube += speedCube; } public void onSurfaceChanged(GL10 gl, int width, int height) { // TODO Auto-generated method stub if (height == 0) height = 1; // To prevent divide by zero float aspect = (float)width / height; // Set the viewport (display area) to cover the entire window gl.glViewport(0, 0, width, height); // Setup perspective projection, with aspect ratio matches viewport gl.glMatrixMode(GL10.GL_PROJECTION); // Select projection matrix gl.glLoadIdentity(); // Reset projection matrix // Use perspective projection GLU.gluPerspective(gl, 45, aspect, 0.1f, 100.f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select model-view matrix gl.glLoadIdentity(); // Reset } public void onSurfaceCreated(GL10 gl, EGLConfig config) { // TODO Auto-generated method stub gl.glClearColor(0.0f, 0.0f, 0.0f, 1.0f); // Set color's clear-value to black gl.glClearDepthf(1.0f); // Set depth's clear-value to farthest gl.glEnable(GL10.GL_DEPTH_TEST); // Enables depth-buffer for hidden surface removal gl.glDepthFunc(GL10.GL_LEQUAL); // The type of depth testing to do gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); // nice perspective view gl.glShadeModel(GL10.GL_SMOOTH); // Enable smooth shading of color gl.glDisable(GL10.GL_DITHER); // Disable dithering for better performance }} public class Cuboid{ private FloatBuffer mVertexBuffer; private FloatBuffer mColorBuffer; private ByteBuffer mIndexBuffer; private float vertices[] = { //width,height,depth -2.5f, -1.0f, -1.0f, 1.0f, -1.0f, -1.0f, 1.0f, 1.0f, -1.0f, -2.5f, 1.0f, -1.0f, -2.5f, -1.0f, 1.0f, 1.0f, -1.0f, 1.0f, 1.0f, 1.0f, 1.0f, -2.5f, 1.0f, 1.0f }; private float colors[] = { // R,G,B,A COLOR 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 1.0f, 1.0f }; private byte indices[] = { // VERTEX 0,1,2,3,4,5,6,7 REPRESENTATION FOR FACES 0, 4, 5, 0, 5, 1, 1, 5, 6, 1, 6, 2, 2, 6, 7, 2, 7, 3, 3, 7, 4, 3, 4, 0, 4, 7, 6, 4, 6, 5, 3, 0, 1, 3, 1, 2 }; public Cuboid() { ByteBuffer byteBuf = ByteBuffer.allocateDirect(vertices.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mVertexBuffer = byteBuf.asFloatBuffer(); mVertexBuffer.put(vertices); mVertexBuffer.position(0); byteBuf = ByteBuffer.allocateDirect(colors.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mColorBuffer = byteBuf.asFloatBuffer(); mColorBuffer.put(colors); mColorBuffer.position(0); mIndexBuffer = ByteBuffer.allocateDirect(indices.length); mIndexBuffer.put(indices); mIndexBuffer.position(0); } public void draw(GL10 gl) { gl.glFrontFace(GL10.GL_CW); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, mVertexBuffer); gl.glColorPointer(4, GL10.GL_FLOAT, 0, mColorBuffer); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glDrawElements(GL10.GL_TRIANGLES, 36, GL10.GL_UNSIGNED_BYTE, mIndexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } } public class Draw3drect extends Activity { private GLSurfaceView glView; // Use GLSurfaceView // Call back when the activity is started, to initialize the view @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); glView = new GLSurfaceView(this); // Allocate a GLSurfaceView glView.setRenderer(new MyGLRenderer(this)); // Use a custom renderer this.setContentView(glView); // This activity sets to GLSurfaceView } // Call back when the activity is going into the background @Override protected void onPause() { super.onPause(); glView.onPause(); } // Call back after onPause() @Override protected void onResume() { super.onResume(); glView.onResume(); } }

  Read the article

• Extreme Optimization – Numerical Algorithm Support

  - by JoshReuben

  Function Delegates Many calculations involve the repeated evaluation of one or more user-supplied functions eg Numerical integration. The EO MathLib provides delegate types for common function signatures and the FunctionFactory class can generate new delegates from existing ones. RealFunction delegate - takes one Double parameter – can encapsulate most of the static methods of the System.Math class, as well as the classes in the Extreme.Mathematics.SpecialFunctions namespace: var sin = new RealFunction(Math.Sin); var result = sin(1); BivariateRealFunction delegate - takes two Double parameters: var atan2 = new BivariateRealFunction (Math.Atan2); var result = atan2(1, 2); TrivariateRealFunction delegate – represents a function takes three Double arguments ParameterizedRealFunction delegate - represents a function taking one Integer and one Double argument that returns a real number. The Pow method implements such a function, but the arguments need order re-arrangement: static double Power(int exponent, double x) { return ElementaryFunctions.Pow(x, exponent); } ... var power = new ParameterizedRealFunction(Power); var result = power(6, 3.2); A ComplexFunction delegate - represents a function that takes an Extreme.Mathematics.DoubleComplex argument and also returns a complex number. MultivariateRealFunction delegate - represents a function that takes an Extreme.Mathematics.LinearAlgebra.Vector argument and returns a real number. MultivariateVectorFunction delegate - represents a function that takes a Vector argument and returns a Vector. FastMultivariateVectorFunction delegate - represents a function that takes an input Vector argument and an output Matrix argument – avoiding object construction  The FunctionFactory class RealFromBivariateRealFunction and RealFromParameterizedRealFunction helper methods - transform BivariateRealFunction or a ParameterizedRealFunction into a RealFunction delegate by fixing one of the arguments, and treating this as a new function of a single argument. var tenthPower = FunctionFactory.RealFromParameterizedRealFunction(power, 10); var result = tenthPower(x); Note: There is no direct way to do this programmatically in C# - in F# you have partial value functions where you supply a subset of the arguments (as a travelling closure) that the function expects. When you omit arguments, F# generates a new function that holds onto/remembers the arguments you passed in and "waits" for the other parameters to be supplied. let sumVals x y = x + y     let sumX = sumVals 10     // Note: no 2nd param supplied.     // sumX is a new function generated from partially applied sumVals.     // ie "sumX is a partial application of sumVals." let sum = sumX 20     // Invokes sumX, passing in expected int (parameter y from original)  val sumVals : int -> int -> int val sumX : (int -> int) val sum : int = 30 RealFunctionsToVectorFunction and RealFunctionsToFastVectorFunction helper methods - combines an array of delegates returning a real number or a vector into vector or matrix functions. The resulting vector function returns a vector whose components are the function values of the delegates in the array. var funcVector = FunctionFactory.RealFunctionsToVectorFunction(     new MultivariateRealFunction(myFunc1),     new MultivariateRealFunction(myFunc2));  The IterativeAlgorithm<T> abstract base class Iterative algorithms are common in numerical computing - a method is executed repeatedly until a certain condition is reached, approximating the result of a calculation with increasing accuracy until a certain threshold is reached. If the desired accuracy is achieved, the algorithm is said to converge. This base class is derived by many classes in the Extreme.Mathematics.EquationSolvers and Extreme.Mathematics.Optimization namespaces, as well as the ManagedIterativeAlgorithm class which contains a driver method that manages the iteration process.  The ConvergenceTest abstract base class This class is used to specify algorithm Termination , convergence and results - calculates an estimate for the error, and signals termination of the algorithm when the error is below a specified tolerance. Termination Criteria - specify the success condition as the difference between some quantity and its actual value is within a certain tolerance – 2 ways: absolute error - difference between the result and the actual value. relative error is the difference between the result and the actual value relative to the size of the result. Tolerance property - specify trade-off between accuracy and execution time. The lower the tolerance, the longer it will take for the algorithm to obtain a result within that tolerance. Most algorithms in the EO NumLib have a default value of MachineConstants.SqrtEpsilon - gives slightly less than 8 digits of accuracy. ConvergenceCriterion property - specify under what condition the algorithm is assumed to converge. Using the ConvergenceCriterion enum: WithinAbsoluteTolerance / WithinRelativeTolerance / WithinAnyTolerance / NumberOfIterations Active property - selectively ignore certain convergence tests Error property - returns the estimated error after a run MaxIterations / MaxEvaluations properties - Other Termination Criteria - If the algorithm cannot achieve the desired accuracy, the algorithm still has to end – according to an absolute boundary. Status property - indicates how the algorithm terminated - the AlgorithmStatus enum values:NoResult / Busy / Converged (ended normally - The desired accuracy has been achieved) / IterationLimitExceeded / EvaluationLimitExceeded / RoundOffError / BadFunction / Divergent / ConvergedToFalseSolution. After the iteration terminates, the Status should be inspected to verify that the algorithm terminated normally. Alternatively, you can set the ThrowExceptionOnFailure to true. Result property - returns the result of the algorithm. This property contains the best available estimate, even if the desired accuracy was not obtained. IterationsNeeded / EvaluationsNeeded properties - returns the number of iterations required to obtain the result, number of function evaluations.  Concrete Types of Convergence Test classes SimpleConvergenceTest class - test if a value is close to zero or very small compared to another value. VectorConvergenceTest class - test convergence of vectors. This class has two additional properties. The Norm property specifies which norm is to be used when calculating the size of the vector - the VectorConvergenceNorm enum values: EuclidianNorm / Maximum / SumOfAbsoluteValues. The ErrorMeasure property specifies how the error is to be measured – VectorConvergenceErrorMeasure enum values: Norm / Componentwise ConvergenceTestCollection class - represent a combination of tests. The Quantifier property is a ConvergenceTestQuantifier enum that specifies how the tests in the collection are to be combined: Any / All  The AlgorithmHelper Class inherits from IterativeAlgorithm<T> and exposes two methods for convergence testing. IsValueWithinTolerance<T> method - determines whether a value is close to another value to within an algorithm's requested tolerance. IsIntervalWithinTolerance<T> method - determines whether an interval is within an algorithm's requested tolerance.

  Read the article

• CodePlex Daily Summary for Sunday, September 02, 2012

  CodePlex Daily Summary for Sunday, September 02, 2012Popular ReleasesThisismyusername's codeplex page.: HTML5 Multitouch Example - Fruit Ninja in HTML5: This is an example of how you could create a game such as Fruit Ninja using HTML5's multitouch capabilities. This example isn't responsive enough, so I will be working on that, and it doesn't have great graphics, either. If I had my own webpage, I could store some graphics and upload the game there and it might look halfway decent, but here the fruits are just circles. I hope you enjoy reading the source code anyway.GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixRuminate XNA 4.0 GUI: Release 1.1.1: Fixed bugs with Slider and TextBox. Added ComboBox.Confuser: Confuser build 76542: This is a build of changeset 76542.SharePoint Column & View Permission: SharePoint Column and View Permission v1.2: Version 1.2 of this project. If you will find any bugs please let me know at enti@zoznam.sk or post your findings in Issue TrackerMihmojsos OS: Mihmojsos OS 3 (Smart Rabbit): !Mihmojsos OS 3 Smart Rabbit Mihmojsos Smart Rabbit is now availableDotNetNuke Translator: 01.00.00 Beta: First release of the project.YNA: YNA 0.2 alpha: Wath's new since 0.1 alpha ? A lot of changes but there are the most interresting : StateManager is now better and faster Mouse events for all YnObjects (Sprites, Images, texts) A really big improvement for YnGroup Gamepad support And the news : Tiled Map support (need refactoring) Isometric tiled map support (need refactoring) Transition effect like "FadeIn" and "FadeOut" (YnTransition) Timers (YnTimer) Path management (YnPath, need more refactoring) Downloads All downloads...Audio Pitch & Shift: Audio Pitch And Shift 5.1.0.2: fixed several issues with streaming modeUrlPager: UrlPager 1.2: Fixed bug in which url parameters will lost after paging; ????????url???bug；Sofire Suite: Sofire v1.5.0.0: Sofire v1.5.0.0 ?? ???????? ?????： 1、?? 2、????EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...Microsoft SQL Server Product Samples: Database: AdventureWorks Databases – 2012, 2008R2 and 2008: About this release This release consolidates AdventureWorks databases for SQL Server 2012, 2008R2 and 2008 versions to one page. Each zip file contains an mdf database file and ldf log file. This should make it easier to find and download AdventureWorks databases since all OLTP versions are on one page. There are no database schema changes. For each release of the product, there is a light-weight and full version of the AdventureWorks sample database. The light-weight version is denoted by ...Christoc's DotNetNuke Module Development Template: DotNetNuke Project Templates V1.1 for VS2012: This release is specifically for Visual Studio 2012 Support, distributed through the Visual Studio Extensions gallery at http://visualstudiogallery.msdn.microsoft.com/ After you build in Release mode the installable packages (source/install) can be found in the INSTALL folder now, within your module's folder, not the packages folder anymore Check out the blog post for all of the details about this release. http://www.dotnetnuke.com/Resources/Blogs/EntryId/3471/New-Visual-Studio-2012-Projec...Home Access Plus+: v8.0: v8.0.0901.1830 RELEASE CHANGED TO BETA Any issues, please log them on http://www.edugeek.net/forums/home-access-plus/ This is full release, NO upgrade ZIP will be provided as most files require replacing. To upgrade from a previous version, delete everything but your AppData folder, extract all but the AppData folder and run your HAP+ install Documentation is supplied in the Web Zip The Quota Services require executing a script to register the service, this can be found in there install ...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0.0.3406 (September 2012): New features: Extended ReflectionClass libxml error handling, constants DateTime::modify(), DateTime::getOffset() TreatWarningsAsErrors MSBuild option OnlyPrecompiledCode configuration option; allows to use only compiled code Fixes: ArgsAware exception fix accessing .NET properties bug fix ASP.NET session handler fix for OutOfProc mode DateTime methods (WordPress posting fix) Phalanger Tools for Visual Studio: Visual Studio 2010 & 2012 New debugger engine, PHP-like debugging ...MabiCommerce: MabiCommerce 1.0.1: What's NewSetup now creates shortcuts Fix spelling errors Minor enhancement to the Map window.ScintillaNET: ScintillaNET 2.5.2: This release has been built from the 2.5 branch. Version 2.5.2 is functionally identical to the 2.5.1 release but also includes the XML documentation comments file generated by Visual Studio. It is not 100% comprehensive but it will give you Visual Studio IntelliSense for a large part of the API. Just make sure the ScintillaNET.xml file is in the same folder as the ScintillaNET.dll reference you're using in your projects. (The XML file does not need to be distributed with your application)....New ProjectsATSV: this is a student project for making a new silverlight UI Bookmark Collector: This project is a best practice example of how to use content items in DotNetNuke. It allows you to quickly and easily manage a listing of external links.BPVotingmachine: BP Vote SystemClean My Space: Sort your files in a fun and fast! With Clean My Space you can!CutePlatform: CutePlatform is a platform game based around the PlanetCute graphics pack from Daniel cook, make him a visit in www.lostgardem.comDancTeX: This project is targeting the integration of LaTeX into VisusalStudio. Epi Info™ Companion for Android: A mobile companion to the Epi Info™ 7 desktop tool for epidemiologic data collection and analysis.Flucene: Object Document Mapper for Lucene.Netfluentserializer: FluentSerializer is a library for .NET usable to create serialize/deserialize data through its fluent interface. The methods it creates are compiled.hongjiapp: hongjiappidealthings educational comprehensive administration system: ?????????????????????????????????????????????.Java Accounting Library: The project aims at providing a Financial Accounting Java Library which may be integrated to any other Java Application independent of its Backend Database.mycnblogs: mycnblogsNETPack: Lightweight and flexible packer for .NETRandom Useful Code: This project is where I will store various useful classes I have built over time. Only the code will be provided, no Library or the like.Suleymaniye Tavimi: Namaz vakitleri hesaplama uygulamasidir. Istenilen yer için hesaplama yapar.

  Read the article

• High Jinks, Hi Jacks, Exceptional DBA Awards and PASS

  - by Rodney

  The countdown to PASS has counted down.  The day after tomorrow I will board a plane, like many others, on my way for the 4th year in a row to SQL PASS Summit.  The anticipation has been excruciating but luckily I have this little thing called a day job as a DBA that has kept me busy and not thinking too much about the event. Well that is not exactly true since my beautiful wife works for PASS so we get to talk about SQL from the time we wake up until late in the evening. I would not have it any other way and I feel very fortunate to be a part of this great event and to have been chosen as the Exceptional DBA Award judge also for the 4th year in a row.  This year, I will have been again tasked with presenting the award to the winner, Mr. Jeff Moden and it will be a true honor to meet him in person as I have read many of his articles on SSC and have attended his session at PASS previously.  The speech is all ready but one item remains, which will be a surprise to all who attend the party on Tuesday night in Seattle (see links below).  Let's face it, Exceptional DBAs everywhere work very hard protecting our data stores, tuning queries, mentoring, saving money, installing clusters, etc and once in a while there is time to be exceptionally non-professional and have a bit of fun. Once incident that happened this year that falls under the High Jinks category was when my network admin asked if I could Telnet into a SQL instance and see if I could make the connection through the firewall that he had just configured. I was able to establish a connection on port 1433 and it occurred to me that it would be very interesting if I could actually run T-SQL queries via a Telnet session much like you might do with an SMTP server. With that thought, I proceeded to demonstrate this could be possible by convincing my senior DBA Shawn McGehee that I was able to do so. At first he did not believe me. It shook his world view.  It was inconceivable.  What I had done, behind the scenes, of course, was to copy and rename SQLCMD.exe to Telnet.exe and used it to connect and run a simple, "Select * from sys.databases" on the SQL instance. I think if it had been anyone other than Shawn I could have extended this ruse indefinitely but he caught on within 30 seconds. It was a fun thirty seconds though. On the High Jacks side of the house, which is really merged to be SQL HACKS, I finally, after several years of struggling with how to connect to an untrusted domain like in a DMZ with a windows account in SSMS, I stumbled upon a solution that does away with the requirement to use SQL Authentication.  While "Runas" is a great command to use to run an application with a higher privileged account, I had not previously been able to figure out how to connect to the remote domain with SSMS and "Runsas". It never connected and caused a login failure every time for the remote windows domain account. Then I ran across an option for "Runas",   "/netonly".  This option postpones the login until a connection is made and only then passes the remote login you supply when you first launch SSMS with the "Runas" command. So a typical shortcut would look like: "C:\Windows\System32\runas.exe /netonly /user:remotedomain.com\rodlandrum "C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\Ssms.exe" You will want to make sure the passwords are synced between the two domains, your local domain and the remote domain, otherwise you may have account lockout issues, but I have found in weeks of testing this is a stable solution. Now it is time to get ready to head for Seattle. Please, if you see me (@SQLBeat) or my wife (@Karlakay22) please run up and high five me (wait..High Jinks.High Jacks.High Fives.Need to change the title) or give me a big bear hug if you are strong enough to lift me off the ground. And if you do actually do that, I will think you are awesome and will not embarrass you by crying out for help or complaining of a broken back or sciatic nerve damage. And now the links to others who have all of the details. First, for the MVP Deep Dives 2, of which, like John, I was lucky enough to be able to participate in this year. http://www.simple-talk.com/community/blogs/johnm/archive/2011/09/29/103577.aspx And the details of the SSC party where the Exceptional DBA of 2011, Jeff Moden, will be awarded. http://www.simple-talk.com/community/blogs/rebecca_amos/archive/2011/10/05/103661.aspx   Cheers! Rodney

  Read the article

• How to select the first ocurrence in the auto-completion menu by pressing Enter?

  - by janoChen

  Every time there's is a pop up menu. I select the first occurrence and press enter but nothing happens (the word is not completed with he selected occurrence). The only way is to press Tab until you reach the term for a second time. Is there a way of selecting the first occurrence pressing Enter (or other Vim hotkey)? My .vimrc: " SHORTCUTS nnoremap <F4> :set filetype=html<CR> nnoremap <F5> :set filetype=php<CR> nnoremap <F3> :TlistToggle<CR> " press space to turn off highlighting and clear any message already displayed. nnoremap <silent> <Space> :nohlsearch<Bar>:echo<CR> " set buffers commands nnoremap <silent> <M-F8> :BufExplorer<CR> nnoremap <silent> <F8> :bn<CR> nnoremap <silent> <S-F8> :bp<CR> " open NERDTree with start directory: D:\wamp\www nnoremap <F9> :NERDTree /home/alex/www<CR> " open MRU nnoremap <F10> :MRU<CR> " open current file (silently) nnoremap <silent> <F11> :let old_reg=@"<CR>:let @"=substitute(expand("%:p"), "/", "\\", "g")<CR>:silent!!cmd /cstart <C-R><C-R>"<CR><CR>:let @"=old_reg<CR> " open current file in localhost (default browser) nnoremap <F12> :! start "http://localhost" file:///"%:p""<CR> " open Vim's default Explorer nnoremap <silent> <F2> :Explore<CR> nnoremap <C-F2> :%s/\.html/.php/g<CR> " REMAPPING " map leader to , let mapleader = "," " remap ` to ' nnoremap ' ` nnoremap ` ' " remap increment numbers nnoremap <C-kPlus> <C-A> " COMPRESSION function Js_css_compress () let cwd = expand('<afile>:p:h') let nam = expand('<afile>:t:r') let ext = expand('<afile>:e') if -1 == match(nam, "[\._]src$") let minfname = nam.".min.".ext else let minfname = substitute(nam, "[\._]src$", "", "g").".".ext endif if ext == 'less' if executable('lessc') cal system( 'lessc '.cwd.'/'.nam.'.'.ext.' &') endif else if filewritable(cwd.'/'.minfname) if ext == 'js' && executable('closure-compiler') cal system( 'closure-compiler --js '.cwd.'/'.nam.'.'.ext.' > '.cwd.'/'.minfname.' &') elseif executable('yuicompressor') cal system( 'yuicompressor '.cwd.'/'.nam.'.'.ext.' > '.cwd.'/'.minfname.' &') endif endif endif endfunction autocmd FileWritePost,BufWritePost *.js :call Js_css_compress() autocmd FileWritePost,BufWritePost *.css :call Js_css_compress() autocmd FileWritePost,BufWritePost *.less :call Js_css_compress() " GUI " taglist right side let Tlist_Use_Right_Window = 1 " hide tool bar set guioptions-=T "remove scroll bars set guioptions+=LlRrb set guioptions-=LlRrb " set the initial size of window set lines=46 columns=180 " set default font set guifont=Monospace " set guifont=Monospace\ 10 " show line number set number " set default theme colorscheme molokai-2 " encoding set encoding=utf-8 setglobal fileencoding=utf-8 bomb set fileencodings=ucs-bom,utf-8,latin1 " SCSS syntax highlight au BufRead,BufNewFile *.scss set filetype=scss " LESS syntax highlight syntax on au BufNewFile,BufRead *.less set filetype=less " Haml syntax highlight "au! BufRead,BufNewFile *.haml "setfiletype haml " Sass syntax highlight "au! BufRead,BufNewFile *.sass "setfiletype sass " set filetype indent filetype indent on " for snipMate to work filetype plugin on " show breaks set showbreak=-----> " coding format set tabstop=4 set shiftwidth=4 set linespace=1 " CONFIG " set location of ctags let Tlist_Ctags_Cmd='D:\ctags58\ctags.exe' " keep the buffer around when left set hidden " enable matchit plugin source $VIMRUNTIME/macros/matchit.vim " folding set foldmethod=marker set foldmarker={,} let g:FoldMethod = 0 map <leader>ff :call ToggleFold()<cr> fun! ToggleFold() if g:FoldMethod == 0 exe 'set foldmethod=indent' let g:FoldMethod = 1 else exe 'set foldmethod=marker' let g:FoldMethod = 0 endif endfun " save and restore folds when a file is closed and re-opened "au BufWrite ?* mkview "au BufRead ?* silent loadview " auto-open NERDTree everytime Vim is invoked au VimEnter * NERDTree /home/alex/www " set omnicomplete autocmd FileType python set omnifunc=pythoncomplete#Complete autocmd FileType javascript set omnifunc=javascriptcomplete#CompleteJS autocmd FileType html set omnifunc=htmlcomplete#CompleteTags autocmd FileType css set omnifunc=csscomplete#CompleteCSS autocmd FileType xml set omnifunc=xmlcomplete#CompleteTags autocmd FileType php set omnifunc=phpcomplete#CompletePHP autocmd FileType c set omnifunc=ccomplete#Complete " Remove trailing white-space once the file is saved au BufWritePre * silent g/\s\+$/s/// " Use CTRL-S for saving, also in Insert mode noremap <C-S> :update!<CR> vnoremap <C-S> <C-C>:update!<CR> inoremap <C-S> <C-O>:update!<CR> " DEFAULT set nocompatible source $VIMRUNTIME/vimrc_example.vim "source $VIMRUNTIME/mswin.vim "behave mswin " disable creation of swap files set noswapfile " no back ups wwhile editing set nowritebackup " disable creation of backups set nobackup " no file change pop up warning autocmd FileChangedShell * echohl WarningMsg | echo "File changed shell." | echohl None set diffexpr=MyDiff() function MyDiff() let opt = '-a --binary ' if &diffopt =~ 'icase' | let opt = opt . '-i ' | endif if &diffopt =~ 'iwhite' | let opt = opt . '-b ' | endif let arg1 = v:fname_in if arg1 =~ ' ' | let arg1 = '"' . arg1 . '"' | endif let arg2 = v:fname_new if arg2 =~ ' ' | let arg2 = '"' . arg2 . '"' | endif let arg3 = v:fname_out if arg3 =~ ' ' | let arg3 = '"' . arg3 . '"' | endif let eq = '' if $VIMRUNTIME =~ ' ' if &sh =~ '\<cmd' let cmd = '""' . $VIMRUNTIME . '\diff"' let eq = '"' else let cmd = substitute($VIMRUNTIME, ' ', '" ', '') . '\diff"' endif else let cmd = $VIMRUNTIME . '\diff' endif silent execute '!' . cmd . ' ' . opt . arg1 . ' ' . arg2 . ' > ' . arg3 . eq endfunction

  Read the article

• Guidance: How to layout you files for an Ideal Solution

  - by Martin Hinshelwood

  Creating a solution and having it maintainable over time is an art and not a science. I like being pedantic and having a place for everything, no matter how small. For setting up the Areas to run Multiple projects under one solution see my post on  When should I use Areas in TFS instead of Team Projects and for an explanation of branching see Guidance: A Branching strategy for Scrum Teams. Update 17th May 2010 – We are currently trialling running a single Sprint branch to improve our history. Whenever I setup a new Team Project I implement the basic version control structure. I put “readme.txt” files in the folder structure explaining the different levels, and a solution file called “[Client].[Product].sln” located at “$/[Client]/[Product]/DEV/Main” within version control. Developers should add any projects you need to create to that solution in the format “[Client].[Product].[ProductArea].[Assembly]” and they will automatically be picked up and built automatically when you setup Automated Builds using Team Foundation Build. All test projects need to be done using MSTest to get proper IDE and Team Foundation Build integration out-of-the-box and be named for the assembly that it is testing with a naming convention of “[Client].[Product].[ProductArea].[Assembly].Tests” Here is a description of the folder layout; this content should be replicated in readme files under version control in the relevant locations so that even developers new to the project can see how to do it. Figure: The Team Project level - at this level there should be a folder for each the products that you are building if you are using Areas correctly in TFS 2010. You should try very hard to avoided spaces as these things always end up in a URL eventually e.g. "Code Auditor" should be "CodeAuditor". Figure: Product Level - At this level there should be only 3 folders (DEV, RELESE and SAFE) all of which should be in capitals. These folders represent the three stages of your application production line. Each of them may contain multiple branches but this format leaves all of your branches at the same level. Figure: The DEV folder is where all of the Development branches reside. The DEV folder will contain the "Main" branch and all feature branches is they are being used. The DEV designation specifies that all code in every branch under this folder has not been released or made ready for release. And feature branches MUST merge (Forward Integrate) from Main and stabilise prior to merging (Reverse Integration) back down into Main and being decommissioned. Figure: In the Feature branching scenario only merges are allowed onto Main, no development can be done there. Once we have a mature product it is important that new features being developed in parallel are kept separate. This would most likely be used if we had more than one Scrum team working on a single product. Figure: when we are ready to do a release of our software we will create a release branch that is then stabilised prior to deployment. This protects the serviceability of of our released code allowing developers to fix bugs and re-release an existing version. Figure: All bugs found on a release are fixed on the release.  All bugs found in a release are fixed on the release and a new deployment is created. After the deployment is created the bug fixes are then merged (Reverse Integration) into the Main branch. We do this so that we separate out our development from our production ready code.  Figure: SAFE or RTM is a read only record of what you actually released. Labels are not immutable so are useless in this circumstance.  When we have completed stabilisation of the release branch and we are ready to deploy to production we create a read-only copy of the code for reference. In some cases this could be a regulatory concern, but in most cases it protects the company building the product from legal entanglements based on what you did or did not release. Figure: This allows us to reference any particular version of our application that was ever shipped.   In addition I am an advocate of having a single solution with all the Project folders directly under the “Trunk”/”Main” folder and using the full name for the project folders.. Figure: The ideal solution If you must have multiple solutions, because you need to use more than one version of Visual Studio, name the solutions “[Client].[Product][VSVersion].sln” and have it reside in the same folder as the other solution. This makes it easier for Automated build and improves the discoverability of your code and its dependencies. Send me your feedback!   Technorati Tags: VS ALM,VSTS Developing,VS 2010,VS 2008,TFS 2010,TFS 2008,TFBS

  Read the article

• Visual Studio &amp; TFS 11 &ndash; List of extensions and upgrades

  - by terje

  This post is a list of the extensions I recommend for use with Visual Studio 11. It’s coming up all the time – what to install, where are the download sites, last version, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 11 connected to a Team Foundation Server 11. Note that we now are at Beta time, and that also many live in a side-by-side environment with Visual Studio 2010.  The side-by-side is supported by VS 11. However, if you installed a component supporting VS11 before you installed VS11, then you need to reinstall it.  The VSIX installer will understand that it is to apply those only for VS11, and will not touch – nor remove – the same for VS2010. A good example here is the Power Commands. The list is more or less in priority order. The focus is to get a setup which can be used for a complete coding experience for the whole ALM process. The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives. Many components have not yet arrived with VS11 support.  I will add them as they arrive.  The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column. If you still need the VS2010 extensions, here they are: The extensions for VS 2010.   Components ready for VS 11, both upgrades and new ones Product Notes Latest Version License Applicable to Microsoft TFS Power Tools Beta 111 Side-by-side with TFS 2010 should work, but remove the Shell Extension from the TFS 2010 power tool first. March 2012(11.0.50321.0) Free TFS integration Yes ReSharper EAP for Beta 11 (updates very often, nearly daily) 7.0.3.261 pr. 16/3/2012 Free as EAP, Licensed later Coding & Quality No Power Commands1 Just reinstall, even if you already have it for VS2010. The reinstall will then apply it to VS 11 1.0.2.3 Free Coding Yes Visualization and Modelling SDK for beta Info here and here. Another download site and info here. Also download from MSDN Subscription site. Requires VS 11 Beta SDK 11 Free now, otherwise Part of MSDN Subscription Modeling Yes Visual Studio 11 Beta SDK Published 16.2.2012     Yes Visual Studio 11 Feedback tool1 Use this to really ease the process of sending bugs back to Microsoft. 1.1 Free as prerelase Visual Studio Yes             #1 Get via Visual Studio’s Tools | Extension Manager (or The Code Gallery). (From Adam : All these are auto updated by the Extension Manager in Visual Studio) #2 Works with ultimate only Components we wait for, not yet in a VS 11 version Product Notes Latest Version License Applicable to Microsoft       Coding Yes Inmeta Build Explorer     Free TFS integration No Build Manager Community Build Manager. Info here from Jakob   Free TFS Integration No Code Contracts Coming real soon   Free Coding & Quality Yes Code Contracts Editor Extensions     Free Coding & Quality Yes Web Std Update     Free Coding (Web) Yes (MSFT) Web Essentials     Free Coding (Web) Yes (MSFT) DotPeek It says up to .Net 4.0, but some tests indicates it seems to be able to handle 4.5. 1.0.0.7999 Free Coding/Investigation No Just Decompile Also says up to .net 4.0   Free Coding/Investigation No dotTrace     Licensed Quality No NDepend   Licensed Quality No tangible T4 editor     Lite version Free (Good enough) Coding (T4 templates) No Pex Moles are now integrated and improved in VS 11 as a new library called Fakes.     Coding & Unit Testing Yes Components which are now integrated into VS 11 Product Notes Productivity Power Tools Features integrated into VS11, with a few exceptions, I don’t think you will miss those. Fakes  Was Moles in 2010. Fakes is improved and made into a product.  NuGet Manager Included in the install, but still an extension package. Info here. Product installation, upgrades and patches for VS/TFS 11   Product Notes Date Applicable to Visual Studio 11 & TFS 11 Beta This is the beta release, and you are free to download and try it out. March 2012 Visual Studio and TFS SQL Server 2008 R2 SP1 Cumulative Update 4 The TFS 11 requires the CU1 at least, but you should go up to at least CU4, since this update solves a ghost record problem that otherwise may cause your TFS database to not release records the way it should when you clean it up, see this post for more information on that issue.  Oct 2011 SQL Server 2008 R2 SP1

  Read the article

• Row Count Plus Transformation

  As the name suggests we have taken the current Row Count Transform that is provided by Microsoft in the Integration Services toolbox and we have recreated the functionality and extended upon it. There are two things about the current version that we thought could do with cleaning up Lack of a custom UI You have to type the variable name yourself In the Row Count Plus Transformation we solve these issues for you. Another thing we thought was missing is the ability to calculate the time taken between components in the pipeline. An example usage would be that you want to know how many rows flowed between Component A and Component B and how long it took. Again we have solved this issue. Credit must go to Erik Veerman of Solid Quality Learning for the idea behind noting the duration. We were looking at one of his packages and saw that he was doing something very similar but he was using a Script Component as a transformation. Our philosophy is that if you have to write or Copy and Paste the same piece of code more than once then you should be thinking about a custom component and here it is. The Row Count Plus Transformation populates variables with the values returned from; Counting the rows that have flowed through the path Returning the time in seconds between when it first saw a row come down this path and when it saw the final row. It is possible to leave both these boxes blank and the component will still work.   All input columns are passed through the transformation unaltered, you are not permitted to change or add to the inputs or outputs of this component. Optionally you can set the component to fire an event, which happens during the PostExecute phase of the execution. This can be useful to improve visibility of this information, such that it is captured in package logging, or can be used to drive workflow in the case of an error event. Properties Property Data Type Description OutputRowCountVariable String The name of the variable into which the amount of row read will be passed (Optional). OutputDurationVariable String The name of the variable into which the duration in seconds will be passed. (Optional). EventType RowCountPlusTransform.EventType The type of event to fire during post execute, included in which are the row count and duration values. RowCountPlusTransform.EventType Enumeration Name Value Description None 0 Do not fire any event. Information 1 Fire an Information event. Warning 2 Fire a Warning event. Error 3 Fire an Error event. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. For 2005/2008 Only - Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Row Count Plus Transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations, and this component requires a minimum of SQL Server 2005 Service Pack 1. Downloads The Row Number Transformation is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Row Count Plus Transformation for SQL Server 2005 Row Count Plus Transformation for SQL Server 2008 Row Count Plus Transformation for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.6 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.5 - SQL Server 2008 release. (15 Oct 2008) SQL Server 2005 Version 1.1.0.43 - Bug fix for duration. For long running processes the duration second count may have been incorrect. (8 Sep 2006) Version 1.1.0.42 - SP1 Compatibility Testing. Added the ability to raise an event with the count and duration data for easier logging or workflow. (18 Jun 2006) Version 1.0.0.1 - SQL Server 2005 RTM. Made available as general public release. (20 Mar 2006) Screenshot Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you get an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component?

  Read the article

• Telerik is First to Announce Support for Microsoft Silverlight Analytics Framework

  Yesterday at MIX 10 conference Microsoft announced the Microsoft Silverlight Analytics Framework Beta. The Silverlight Analytics Framework (SAF) is a new open-source framework to allow designers and developers to integrate web analytics into Silverlight applications in a consistent manner. Supporting out-of-browser and offline scenarios, Microsoft built this framework in conjunction with a number of web analytics services and control vendors to support multiple analytics services simultaneously without degrading application performance. Because the SAF is enabled as a set of behaviors in Microsoft Expression Blend, designers and developers can visually instrument their designs and configure A/B testing rapidly without writing any code. Telerik is proud to be the first control vendor to support the Silverlight Analytics Framework. RadControls for Silverlight can be used with the framework out of the box. The suite offers Silverlight Analytics Framework handlers and behavior, helping developers to fine tune the values sent to the analytics providers. Because the analytics framework is using the Managed Extensibility Framework (MEF) for composition, you don't need to change the way you use the controls to benefit from the Telerik handlers. Just add a reference to the Telerik assemblies that contains the handlers. Here is the code that you need to declare to use RadTreeView: <UserControl x:Class="Telerik.SLAF.MainPage"         xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"         xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"         xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"         xmlns:ga="clr-namespace:Google.WebAnalytics;assembly=Google.WebAnalytics"         xmlns:sa="clr-namespace:Microsoft.WebAnalytics.Behaviors;assembly=Microsoft.WebAnalytics.Behaviors"         xmlns:ic="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"         xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"         xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation">        <Grid x:Name="LayoutRoot">         <i:Interaction.Behaviors>             <ga:GoogleAnalytics ProfileId="--Your GA ProfileId" Category="Demo" />         </i:Interaction.Behaviors>         <telerikNavigation:RadTreeView>             <i:Interaction.Triggers>                 <i:EventTrigger EventName="SelectionChanged">                     <sa:TrackAction />                 </i:EventTrigger>             </i:Interaction.Triggers>             <telerikNavigation:RadTreeViewItem Header="Item1">             </telerikNavigation:RadTreeViewItem>             <telerikNavigation:RadTreeViewItem Header="Item2" />             <telerikNavigation:RadTreeViewItem Header="Item3" />         </telerikNavigation:RadTreeView>     </Grid> </UserControl> Download the Telerik Microsoft Silverlight Analytics Framework Handlers and the sample project. This is our first Beta release - please drop us a line with any feedback you have or even better if you are at MIX10 - come visit us at the booth in the "Commons" hall so we can discuss it in person. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Where Facebook Stands Heading Into 2013

  - by Mike Stiles

  In our last blog, we looked at how Twitter is positioned heading into 2013. Now it’s time to take a similar look at Facebook. 2012, for a time at least, seemed to be the era of Facebook-bashing. Between a far-from-smooth IPO, subsequent stock price declines, and anxiety over privacy, the top social network became a target for comedians, politicians, business journalists, and of course those who were prone to Facebook-bash even in the best of times. But amidst the “this is the end of Facebook” headlines, the company kept experimenting, kept testing, kept innovating, and pressing forward, committed as always to the user experience, while concurrently addressing monetization with greater urgency. Facebook enters 2013 with over 1 billion users around the world. Usage grew 41% in Brazil, Russia, Japan, South Korea and India in 2012. In the Middle East and North Africa, an average 21 new signups happen per minute. Engagement and time spent on the site would impress the harshest of critics. Facebook, while not bulletproof, has become such an integrated daily force in users’ lives, it’s getting hard to imagine any future mass rejection. You want to see a company recognizing weaknesses and shoring them up. Mobile was a weakness in 2012 as Facebook was one of many caught by surprise at the speed of user migration to mobile. But new mobile interfaces, better mobile ads, speed upgrades, standalone Messenger and Pages mobile apps, and the big dollar acquisition of Instagram, were a few indicators Facebook won’t play catch-up any more than it has to. As a user, the cool thing about Facebook is, it knows you. The uncool thing about Facebook is, it knows you. The company’s walking a delicate line between the public’s competing desires for customized experiences and privacy. While the company’s working to make privacy options clearer and easier, Facebook’s Paul Adams says data aggregation can move from acting on what a user is engaging with at the moment to a more holistic view of what they’re likely to want at any given time. To help learn about you, there’s Open Graph. Embedded through diverse partnerships, the idea is to surface what you’re doing and what you care about, and help you discover things via your friends’ activities. Facebook’s Director of Engineering, Mike Vernal, says building mobile social apps connected to Facebook in such ways is the next wave of big innovation. Expect to see that fostered in 2013. The Facebook site experience is always evolving. Some users like that about Facebook, others can’t wait to complain about it…on Facebook. The Facebook focal point, the News Feed, is not sacred and is seeing plenty of experimentation with the insertion of modules. From upcoming concerts, events, suggested Pages you might like, to aggregated “most shared” content from social reader apps, plenty could start popping up between those pictures of what your friends had for lunch.  As for which friends’ lunches you see, that’s a function of the mythic EdgeRank…which is also tinkered with. When Facebook changed it in September, Page admins saw reach go down and the high anxiety set in quickly. Engagement, however, held steady. The adjustment was about relevancy over reach. (And oh yeah, reach was something that could be charged for). Facebook wants users to see what they’re most likely to like, based on past usage and interactions. Adding to the “cream must rise to the top” philosophy, they’re now even trying out ordering post comments based on the engagement the comments get. Boy, it’s getting competitive out there for a social engager. Facebook has to make $$$. To do that, they must offer attractive vehicles to marketers. There are a myriad of ad units. But a key Facebook marketing concept is the Sponsored Story. It’s key because it encourages content that’s good, relevant, and performs well organically. If it is, marketing dollars can amplify it and extend its reach. Brands can expect the rollout of a search product and an ad network. That’s a big deal. It takes, as Open Graph does, the power of Facebook’s user data and carries it beyond the Facebook environment into the digital world at large. No one could target like Facebook can, and some analysts think it could double their roughly $5 billion revenue stream. As every potential revenue nook and cranny is explored, there are the users themselves. In addition to Gifts, Facebook thinks users might pay a few bucks to promote their own posts so more of their friends will see them. There’s also word classifieds could be purchased in News Feeds, though they won’t be called classifieds. And that’s where Facebook stands; a wildly popular destination, a part of our culture, with ever increasing functionalities, the biggest of big data, revenue strategies that appeal to marketers without souring the user experience, new challenges as a now public company, ongoing privacy concerns, and innovations that carry Facebook far beyond its own borders. Anyone care to write a “this is the end of Facebook” headline? @mikestilesPhoto via stock.schng

  Read the article

• My Codemash 2011 Retrospective

  - by Greg Malcolm

  I just got back from Codemash yesterday, and still on an adrenaline buzz. Here's my take on this years encounter: The Awesome Nearly everybody in one place Codemash is the ultimate place to catch up with community friends. This is my 3rd year visiting and I've got to know a great number of very cool people through various conferences, Give Camps and other community events. I'm finding more and more that Codemash is the best place to catch up with everybody regardless of technology interest or location. Of course I always make a whole bunch more friends while I'm there! Yay! Open Spaced I found the open spaces didn't work so well last year. This year things went a lot smoother and the topics were engaging and fresh. While I miss Alan Steven's approach of running it like an agile project, it was very cool to see that it evolving. Laptops were often cracked open, not just once but frequently! For example: Jasmine - Paired on a javascript kata using the Jasmine javascript test runner J - Sat in on a J demo from local J enthusiast, Tracy Harms Watir - More pairing, this time using Ruby with the watir-webdriver through cucumber. I'd mostly forgotten that Cucumber runs just fine without Rails. It made a change to do without. The other spaces were engaging too, but I think that's enough for that topic. Javascript Shenanigans I've already mentioned that I attended a Jasmine kata session. Jasmine is close to my heart right now every since I discovered it while on the hunt for a decent Javascript testing framework for a javascript koans project earlier this year. Well, it also got covered in the Java Precompiler and Pillar's vendor session, which was great to see. Node.js was also a reoccurring theme. Node.js in a nutshell? It's an extremely scalable Event based I/O server which runs on Javascript. I'd already encountered through a Startup Weekend project and have been noticing increasing interest of late. After encountering more node.js driven excitement from my peers at codemash I absolutely had to attend the open space on it. At least 20 people turned up and by the end we had some answers, a whole ton of new questions and an impromptu user group in the form of a twitter channel (#nodemash). I have no idea where this is going to go or how big it is going to become, but if it can cross the chasm into the enterprise it could become huge... Scala Koans I'm a bit of a Koans addict, and I really need more exposure to functional languages so I gave the Scala Koans precompiler a try. Great fun! I'm really glad I attended because I found I had a whole ton of questions. Currently the koans are available here, and the answers are here. Opportunities While we're on the subject can we change the subject now? Hai Gregory, You really need to keep the drinking for later in the day. I mean seriously, you're 34 and you still do this every single time! Sure, you made it to Chad Fowler keynote ok, but you looking a rather pale weren't you? Also might have been nice to attend 'Netflicks in the Cloud' instead of 'Sleeping It Off For People Who Should Know Better'. Kthxbye PS: Stop talking to yourself Not that I entirely regret it, I've had some of my greatest insights through late night drunken conversations at the CodeMash bar. Just might be nice to reign it in a little and get something out of the next morning too. Diversity This is something that is in the back of my mind because of conversations at Codemash as well as throughout the year; I'm realizing more and more how discouraging the IT profession is for women. I notice in the community there has been a lot of attention paid to stamping out harrasment, which is good, but there also seems to be a massive PR issue. I really don't have any solutions, but I figure it can't hurt to pay more attention to whats going on... And in Other News I now have a picture of Chad Fowler giving me more cowbell! Sadly I managed to lose the cowbell later on. Hopefully it's gone to a Better Place. The Womack Family Band joined in with the musicians jam this year. There's my cowbell again! Why must you hide from me? I also finally went in the water for the first time in all the I've been coming to codemash. Why did I wait so long?!?

  Read the article

• Clean way to use mutable implementation of Immutable interfaces for encapsulation

  - by dsollen

  My code is working on some compost relationship which creates a tree structure, class A has many children of type B, which has many children of type C etc. The lowest level class, call it bar, also points to a connected bar class. This effectively makes nearly every object in my domain inter-connected. Immutable objects would be problematic due to the expense of rebuilding almost all of my domain to make a single change to one class. I chose to go with an interface approach. Every object has an Immutable interface which only publishes the getter methods. I have controller objects which constructs the domain objects and thus has reference to the full objects, thus capable of calling the setter methods; but only ever publishes the immutable interface. Any change requested will go through the controller. So something like this: public interface ImmutableFoo{ public Bar getBar(); public Location getLocation(); } public class Foo implements ImmutableFoo{ private Bar bar; private Location location; @Override public Bar getBar(){ return Bar; } public void setBar(Bar bar){ this.bar=bar; } @Override public Location getLocation(){ return Location; } } public class Controller{ Private Map<Location, Foo> fooMap; public ImmutableFoo addBar(Bar bar){ Foo foo=fooMap.get(bar.getLocation()); if(foo!=null) foo.addBar(bar); return foo; } } I felt the basic approach seems sensible, however, when I speak to others they always seem to have trouble envisioning what I'm describing, which leaves me concerned that I may have a larger design issue then I'm aware of. Is it problematic to have domain objects so tightly coupled, or to use the quasi-mutable approach to modifying them? Assuming that the design approach itself isn't inherently flawed the particular discussion which left me wondering about my approach had to do with the presence of business logic in the domain objects. Currently I have my setter methods in the mutable objects do error checking and all other logic required to verify and make a change to the object. It was suggested that this should be pulled out into a service class, which applies all the business logic, to simplify my domain objects. I understand the advantage in mocking/testing and general separation of logic into two classes. However, with a service method/object It seems I loose some of the advantage of polymorphism, I can't override a base class to add in new error checking or business logic. It seems, if my polymorphic classes were complicated enough, I would end up with a service method that has to check a dozen flags to decide what error checking and business logic applies. So, for example, if I wanted to have a childFoo which also had a size field which should be compared to bar before adding par my current approach would look something like this. public class Foo implements ImmutableFoo{ public void addBar(Bar bar){ if(!getLocation().equals(bar.getLocation()) throw new LocationException(); this.bar=bar; } } public interface ImmutableChildFoo extends ImmutableFoo{ public int getSize(); } public ChildFoo extends Foo implements ImmutableChildFoo{ private int size; @Override public int getSize(){ return size; } @Override public void addBar(Bar bar){ if(getSize()<bar.getSize()){ throw new LocationException(); super.addBar(bar); } My colleague was suggesting instead having a service object that looks something like this (over simplified, the 'service' object would likely be more complex). public interface ImmutableFoo{ ///original interface, presumably used in other methods public Location getLocation(); public boolean isChildFoo(); } public interface ImmutableSizedFoo implements ImmutableFoo{ public int getSize(); } public class Foo implements ImmutableSizedFoo{ public Bar bar; @Override public void addBar(Bar bar){ this.bar=bar; } @Override public int getSize(){ //default size if no size is known return 0; } @Override public boolean isChildFoo return false; } } public ChildFoo extends Foo{ private int size; @Override public int getSize(){ return size; } @Override public boolean isChildFoo(); return true; } } public class Controller{ Private Map<Location, Foo> fooMap; public ImmutableSizedFoo addBar(Bar bar){ Foo foo=fooMap.get(bar.getLocation()); service.addBarToFoo(foo, bar); returned foo; } public class Service{ public static void addBarToFoo(Foo foo, Bar bar){ if(foo==null) return; if(!foo.getLocation().equals(bar.getLocation())) throw new LocationException(); if(foo.isChildFoo() && foo.getSize()<bar.getSize()) throw new LocationException(); foo.setBar(bar); } } } Is the recommended approach of using services and inversion of control inherently superior, or superior in certain cases, to overriding methods directly? If so is there a good way to go with the service approach while not loosing the power of polymorphism to override some of the behavior?

  Read the article

• Getting App.config to be configuration specific in VS2010

  - by MarkPearl

  I recently wanted to have a console application that had configuration specific settings. For instance, if I had two configurations “Debug” and “Release”, depending on the currently selected configuration I wanted it to use a specific configuration file (either debug or config). If you are wanting to do something similar, here is a potential solution that worked for me. Setting up a demo app to illustrate the point First, let’s set up an application that will demonstrate the most basic concept. using System; using System.Configuration; namespace ConsoleSpecificConfiguration { class Program { static void Main(string[] args) { Console.WriteLine("Config"); Console.WriteLine(ConfigurationManager.AppSettings["Example Config"]); Console.ReadLine(); } } }   This does a really simple thing. Display a config when run. To do this, you also need a config file set up. My default looks as follows… <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="Example Config" value="Default"/> </appSettings> </configuration>   Your entire solution will look as follows… Running the project you will get the following amazing output…   Let’s now say instead of having one config file we want depending on whether we are running in “Debug” or “Release” for the solution configuration we want different config settings to be propagated across you can do the following… Step 1 – Create alternate config Files First add additional config files to your solution. You should have some form of naming convention for these config files, I have decided to follow a similar convention to the one used for web.config, so in my instance I am going to add a App.Debug.config and a App.Release.config file BUT you can follow any naming convention you want provided you wire up the rest of the approach to use this convention. My files look as follows.. App.Debug.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="Example Config" value="Debug"/> </appSettings> </configuration>   App.Release.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <appSettings> <add key="Example Config" value="Release"/> </appSettings> </configuration>   Your solution will now look as follows… Step 2 – Create a bat file that will overwrite files The next step is to create a bat file that will overwrite one file with another. If you right click on the solution in the solution explorer there will be a menu option to add new items to the solution. Create a text file called “copyifnewer.bat” which will be our copy script. It’s contents should look as follows… @echo off echo Comparing two files: %1 with %2 if not exist %1 goto File1NotFound if not exist %2 goto File2NotFound fc %1 %2 /A if %ERRORLEVEL%==0 GOTO NoCopy echo Files are not the same. Copying %1 over %2 copy %1 %2 /y & goto END :NoCopy echo Files are the same. Did nothing goto END :File1NotFound echo %1 not found. goto END :File2NotFound copy %1 %2 /y goto END :END echo Done. Your solution should now look as follows…   Step 3 – Customize the Post Build event command line We now need to wire up everything – which we will do using the post build event command line in VS2010. Right click on your project and go to it’s properties We are now going to wire up the script so that when we build our project it will overwrite the default App.config with whatever file we want. The syntax goes as follows… call "$(SolutionDir)copyifnewer.bat" "$(ProjectDir)App.$(ConfigurationName).config" "$(ProjectDir)$(OutDir)\$(TargetFileName).config" Testing it If I now change my project configuration to Release   And then run my application I get the following output… Toggling between Release and Debug mode will show that the config file is changing each time. And that is it!

  Read the article

• When does "proper" programming no longer matter?

  - by Kai Qing

  I've been a full time programmer for about 8 years now. Web based mostly, ranging in weird jobs for clients. Never anything I "want" to do. So my experience is limited to what I've been contracted to do, having no real incentive to master anything in particular. So here's my scenario and ultimately what I wonder about... I've been building an android game in my spare time. It's using the libgdx library so quite a bit of the heavy lifting is done for me. I don't read much of the docs cause unless it's in tutorial format I will just not care, and ultimately most of my questions have already been asked on stackoverflow. I get along fine and my game works as expected... Suspiciously well, even. So much so that I wonder why one should bother to be "proper" when coding if the end result is ultimately the same. To be more specific, I used a hashtable because I wanted something close to an associative array. Human readable key values. In other places to achieve similar things, I use a vector. I know libgdx has vector2 and vector3 classes, but I've never used them. When I come across weird problems and search stackoverflow for help, I see a lot of people just reaming the questions that use a certain datatype when another one is technically "proper." Like using an ArrayList because it does not require defined bounds versus re-defining an int[] with new known boundaries. Or even something trivial like this: for(int i = 0; i < items.length; i ++) { // do something } I know it evaluates item.length on every iteration. I just don't care. I know items will never be more than 15 to 20 items. So why bother caring if I evaluate items.length on every iteration? So I wonder - why does everyone get all up in arms over this? Who cares if I use a less efficient datatype to get the job done? I ran some tests to see how the app performs using the lazy, get it done fast and don't look back method I just described versus the proper, follow the tutorial and use the exact data types suggested by the community. The results: Same thing. Average 45 fps. I opened every app on the phone and galaxy tab. Same deal. No difference. My game is pretty graphic intensive. It's not like it's just a simple thing. I expected it to perform kind of badly since I don't care to optimize image assets or... well, you probably get the idea. I'm making the game for fun. As a joke, really. But in doing so I'm working outside the normal scope of my job, which is to always follow the rules and do it the right way. So to say, I am without bounds here and this has caused me to wonder why I ever really care to be "proper" So I guess my question to you is this: Is there a threshold when it no longer matters to be proper? Is there a lasting, longer term consequence to the lazy, get it done and don't look back route? Is it ok to say - "so long as it gets the job done, I don't care?" Disclaimer: When I program my game, I am almost always drunk. I do it to remember why I got into this stuff to begin with because the monotony of client based web work will make you hate being a programmer. I'm having a blast and my game is not crashing, tests well, performs well, looks good on all devices so far and has no noticeable negative impact on any of my testing devices. I expected failure because I was being so drunkenly careless with my code, but to my surprise, it had no noticeable impact. I am now starting to question the need to be careful. Help me regain the ability to care! ... or explain why it's not a bad thing to not care. Secondary disclaimer: I am aware of the benefits of maintainability. For myself and others. Agreed. But it's not like someone happening across my inefficient int[] loop won't know what it does. As an experienced programmer those kinds of things are just clear on sight. I document the complex stuff for myself knowing I was drunk and will probably need a reminder. Those notes would clarify any confusion for someone who might ever gaze upon my ridiculous game - though the reality is that either I maintain it myself or it fades into time. I'm ok with that. But if it doesn't slow the device down, or crash, then crossing the t's and dotting the i's might actually require more time than it's worth.

  Read the article

• Inventory Management concepts in XNA game

  - by user1332755

  I am trying to code the inventory system in my first real game so I have very little experience in both c# and game engine development. Basically, I need some general guidance and tips with how to structure and organize these sorts of systems. Please tell me if I am on the right track or not before I get too deep into making some badly structured system. It's fine if you don't feel like looking through my code, suggestions about general structure would also be appreciated. What I am aiming to end up with is some sort of system like Minecraft or Terraria. It must include: main inventory GUI (items can be dragged and placed in whatever slot desired Itembar outside of the main inventory which can be assigned to certain items the ability to use items from either location So far, I have 4 main classes: Inventory holds the general info and methods, inventoryslot holds info for individual slots, Itembar holds all info and methods for itself, and finally, ItemManager to manage interactions between the two and hold a master list of items. So far, my itembar works perfectly and interacts well with mousedragging items into and out of it as well as activating the item effect. Here is the code I have so far: (there is a lot but I will try to keep it relevant) This is the code for the itembar on the main screen: class Itembar { public Texture2D itembarfull, iSelected; public static Rectangle itembar = new Rectangle(5, 218, 40, 391); public Rectangle box1 = new Rectangle(itembar.X, 218, 40, 40); //up to 10 Rectangles for each slot public int Selected = 0; private ItemManager manager; public Itembar(Texture2D texture, Texture2D texture3, ItemManager mann) { itembarfull = texture; iSelected = texture3; manager = mann; } public void Update(GameTime gametime) { } public void Draw(SpriteBatch spriteBatch) { spriteBatch.Draw( itembarfull, new Vector2 (itembar.X, itembar.Y), null, Color.White, 0.0f, Vector2.Zero, 1.0f, SpriteEffects.None, 1.0f); if (Selected == 1) spriteBatch.Draw(iSelected, new Rectangle(box1.X-3, box1.Y-3, box1.Width+6, box1.Height+6), Color.White); //goes up to 10 slots } public int Box1Query() { foreach (Item item in manager.items) { if(box1.Contains(item.BoundingBox)) return manager.items.IndexOf(item); } return 999; } //10 different box queries It is working fine right now. I just put an Item in there and the box will query things like the item's effects, stack number, consumable or not etc...This one is basically almost complete. Here is the main inventory class: class Inventory { public bool isActive; public List<Rectangle> mainSlots = new List<Rectangle>(24); public List<InventorySlot> mainSlotscheck = new List<InventorySlot>(24); public static Rectangle inv = new Rectangle(841, 469, 156, 231); public Rectangle invfull = new Rectangle(inv.X, inv.Y, inv.Width, inv.Height); public Rectangle inv1 = new Rectangle(inv.X + 4, inv.Y +3, 32, 32); //goes up to inv24 resulting in a 6x4 grid of Rectangles public Inventory() { mainSlots.Add(inv1); mainSlots.Add(inv2); mainSlots.Add(inv3); mainSlots.Add(inv4); //goes up to 24 foreach (Rectangle slot in mainSlots) mainSlotscheck.Add(new InventorySlot(slot)); } //update and draw methods are empty because im not too sure what to put there public int LookforfreeSlot() { int slotnumber = 999; for (int x = 0; x < mainSlots.Count; x++) { if (mainSlotscheck[x].isFree) { slotnumber = x; break; } } return slotnumber; } } } LookforFreeSlot() method is meant to be called when I do AddtoInventory(). I'm kinda stumped about what other things I need to put in this class. Here is the inventorySlot class: (its main purpose is to check the bool "isFree" to see whether or not something already occupies the slot. But i guess it can also do other stuff like get item info.) class InventorySlot { public int X, Y; public int Width = 32, Height = 32; public Vector2 Position; public int slotnumber; public bool free = true; public int? content = null; public bool isFree { get { return free; } set { free = value; } } public InventorySlot(Rectangle slot) { slot = new Rectangle(X, Y, Width, Height); } } } Finally, here is the ItemManager (I am omitting the master list because it is too long) class ItemManager { public List<Item> items = new List<Item>(20); public List<Item> inventory1 = new List<Item>(24); public List<Item> inventory2 = new List<Item>(24); public List<Item> inventory3 = new List<Item>(24); public List<Item> inventory4 = new List<Item>(24); public Texture2D icon, filta; private Rectangle msRect; MouseState mouseState; public int ISelectedIndex; Inventory inventory; SpriteFont font; public void GenerateItems() { items.Add(new Item(new Rectangle(0, 0, 32, 32), icon, font)); items[0].name = "Grass Chip"; items[0].itemID = 0; items[0].consumable = true; items[0].stackable = true; items[0].maxStack = 99; items.Add(new Item(new Rectangle(32, 0, 32, 32), icon, font)); //master list continues. it will generate all items in the game; } public ItemManager(Inventory inv, Texture2D itemsheet, Rectangle mouseRectt, MouseState ms, Texture2D fil, SpriteFont f) { icon = itemsheet; msRect = mouseRectt; filta = fil; mouseState = ms; inventory = inv; font = f; } //once again, no update or draw public void mousedrag() { items[0].DestinationRect = new Rectangle (msRect.X, msRect.Y, 32, 32); items[0].dragging = true; } public void AddtoInventory(Item item) { int index = inventory.LookforfreeSlot(); if (index == 999) return; item.DestinationRect = inventory.mainSlots[index]; inventory.mainSlotscheck[index].content = item.itemID; inventory.mainSlotscheck[index].isFree = false; item.IsActive = true; } } } The mousedrag works pretty well. AddtoInventory doesn't work because LookforfreeSlot doesn't work. Relevant code from the main program: When I want to add something to the main inventory, I do something like this: foreach (Particle ether in ether1.ethers) { if (ether.isCollected) itemmanager.AddtoInventory(itemmanager.items[14]); } This turned out to be much longer than I had expected :( But I hope someone is interested enough to comment.

  Read the article

• Securing an ADF Application using OES11g: Part 1

  - by user12587121

  Future releases of the Oracle stack should allow ADF applications to be secured natively with Oracle Entitlements Server (OES). In a sequence of postings here I explore one way to achive this with the current technology, namely OES 11.1.1.5 and ADF 11.1.1.6. ADF Security Basics ADF Bascis The Application Development Framework (ADF) is Oracle’s preferred technology for developing GUI based Java applications.  It can be used to develop a UI for Swing applications or, more typically in the Oracle stack, for Web and J2EE applications.  ADF is based on and extends the Java Server Faces (JSF) technology.  To get an idea, Oracle provides an online demo to showcase ADF components. ADF can be used to develop just the UI part of an application, where, for example, the data access layer is implemented using some custom Java beans or EJBs.  However ADF also has it’s own data access layer, ADF Business Components (ADF BC) that will allow rapid integration of data from data bases and Webservice interfaces to the ADF UI component.   In this way ADF helps implement the MVC  approach to building applications with UI and data components. The canonical tutorial for ADF is to open JDeveloper, define a connection to a database, drag and drop a table from the database view to a UI page, build and deploy.  One has an application up and running very quickly with the ability to quickly integrate changes to, for example, the DB schema. ADF allows web pages to be created graphically and components like tables, forms, text fields, graphs and so on to be easily added to a page.  On top of JSF Oracle have added drag and drop tooling with JDeveloper and declarative binding of the UI to the data layer, be it database, WebService or Java beans.  An important addition is the bounded task flow which is a reusable set of pages and transitions.   ADF adds some steps to the page lifecycle defined in JSF and adds extra widgets including powerful visualizations. It is worth pointing out that the Oracle Web Center product (portal, content management and so on) is based on and extends ADF. ADF Security ADF comes with it’s own security mechanism that is exposed by JDeveloper at development time and in the WLS Console and Enterprise Manager (EM) at run time. The security elements that need to be addressed in an ADF application are: authentication, authorization of access to web pages, task-flows, components within the pages and data being returned from the model layer. One  typically relies on WLS to handle authentication and because of this users and groups will also be handled by WLS.  Typically in a Dev environment, users and groups are stored in the WLS embedded LDAP server. One has a choice when enabling ADF security (Application->Secure->Configure ADF Security) about whether to turn on ADF authorization checking or not: In the case where authorization is enabled for ADF one defines a set of roles in which we place users and then we grant access to these roles to the different ADF elements (pages or task flows or elements in a page). An important notion here is the difference between Enterprise Roles and Application Roles. The idea behind an enterprise role is that is defined in terms of users and LDAP groups from the WLS identity store.  “Enterprise” in the sense that these are things available for use to all applications that use that store.  The other kind of role is an Application Role and the idea is that  a given application will make use of Enterprise roles and users to build up a set of roles for it’s own use.  These application roles will be available only to that application.   The general idea here is that the enterprise roles are relatively static (for example an Employees group in the LDAP directory) while application roles are more dynamic, possibly depending on time, location, accessed resource and so on.  One of the things that OES adds that is that we can define these dynamic membership conditions in Role Mapping Policies. To make this concrete, here is how, at design time in Jdeveloper, one assigns these rights in Jdeveloper, which puts them into a file called jazn-data.xml: When the ADF app is deployed to a WLS this JAZN security data is pushed to the system-jazn-data.xml file of the WLS deployment for the policies and application roles and to the WLS backing LDAP for the users and enterprise roles.  Note the difference here: after deploying the application we will see the users and enterprise roles show up in the WLS LDAP server.  But the policies and application roles are defined in the system-jazn-data.xml file.  Consult the embedded WLS LDAP server to manage users and enterprise roles by going to the domain console and then Security Realms->myrealm->Users and Groups: For production environments (or in future to share this data with OES) one would then perform the operation of “reassociating” this security policy and application role data to a DB schema (or an LDAP).  This is done in the EM console by reassociating the Security Provider.  This blog posting has more explanations and references on this reassociation process. If ADF Authentication and Authorization are enabled then the Security Policies for a deployed application can be managed in EM.  Our goal is to be able to manage security policies for the applicaiton rather via OES and it's console. Security Requirements for an ADF Application With this package tour of ADF security we can see that to secure an ADF application with we would expect to be able to take care of at least the following items: Authentication, including a user and user-group store Authorization for page access Authorization for bounded Task Flow access.  A bounded task flow has only one point of entry and so if we protect that entry point by calling to OES then all the pages in the flow are protected.  Authorization for viewing data coming from the data access layer In the next posting we will describe a sample ADF application and required security policies. References ADF Dev Guide: Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework: Enabling ADF Security in a Fusion Web Application Oracle tutorial on securing a sample ADF application, appears to require ADF 11.1.2 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Extending Database-as-a-Service to Provision Databases with Application Data

  - by Nilesh A

  Oracle Enterprise Manager 12c Database as a Service (DBaaS) empowers Self Service/SSA Users to rapidly spawn databases on demand in cloud. The configuration and structure of provisioned databases depends on respective service template selected by Self Service user while requesting for database. In EM12c, the DBaaS Self Service/SSA Administrator has the option of hosting various service templates in service catalog and based on underlying DBCA templates.Many times provisioned databases require production scale data either for UAT, testing or development purpose and managing DBCA templates with data can be unwieldy. So, we need to populate the database using post deployment script option and without any additional work for the SSA Users. The SSA Administrator can automate this task in few easy steps. For details on how to setup DBaaS Self Service Portal refer to the DBaaS CookbookIn this article, I will list steps required to enable EM 12c DBaaS to provision databases with application data in two distinct ways using: 1) Data pump 2) Transportable tablespaces (TTS). The steps listed below are just examples of how to extend EM 12c DBaaS and you can even have your own method plugged in part of post deployment script option. Using Data Pump to populate databases These are the steps to be followed to implement extending DBaaS using Data Pump methodolgy: Production DBA should run data pump export on the production database and make the dump file available to all the servers participating in the database zone [sample shown in Fig.1] -- Full exportexpdp FULL=y DUMPFILE=data_pump_dir:dpfull1%U.dmp, data_pump_dir:dpfull2%U.dmp PARALLEL=4 LOGFILE=data_pump_dir:dpexpfull.log JOB_NAME=dpexpfull Figure-1:  Full export of database using data pump Create a post deployment SQL script [sample shown in Fig. 2] and this script can either be uploaded into the software library by SSA Administrator or made available on a shared location accessible from servers where databases are likely to be provisioned Normal 0 -- Full importdeclare    h1   NUMBER;begin-- Creating the directory object where source database dump is backed up.    execute immediate 'create directory DEST_LOC as''/scratch/nagrawal/OracleHomes/oradata/INITCHNG/datafile''';-- Running import    h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'FULL', job_name => 'DB_IMPORT10');    dbms_datapump.set_parallel(handle => h1, degree => 1);    dbms_datapump.add_file(handle => h1, filename => 'IMP_GRIDDB_FULL.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);    dbms_datapump.add_file(handle => h1, filename => 'EXP_GRIDDB_FULL_%U.DMP', directory => 'DEST_LOC', filetype => 1);    dbms_datapump.start_job(handle => h1);    dbms_datapump.detach(handle => h1);end;/ Figure-2: Importing using data pump pl/sql procedures Using DBCA, create a template for the production database – include all the init.ora parameters, tablespaces, datafiles & their sizes SSA Administrator should customize “Create Database Deployment Procedure” and provide DBCA template created in the previous step. In “Additional Configuration Options” step of Customize “Create Database Deployment Procedure” flow, provide the name of the SQL script in the Custom Script section and lock the input (shown in Fig. 3). Continue saving the deployment procedure. Figure-3: Using Custom script option for calling Import SQL Now, an SSA user can login to Self Service Portal and use the flow to provision a database that will also  populate the data using the post deployment step. Using Transportable tablespaces to populate databases Copy of all user/application tablespaces will enable this method of populating databases. These are the required steps to extend DBaaS using transportable tablespaces: Production DBA needs to create a backup of tablespaces. Datafiles may need conversion [such as from Big Endian to Little Endian or vice versa] based on the platform of production and destination where DBaaS created the test database. Here is sample backup script shows how to find out if any conversion is required, describes the steps required to convert datafiles and backup tablespace. SSA Administrator should copy the database (tablespaces) backup datafiles and export dumps to the backup location accessible from the hosts participating in the database zone(s). Create a post deployment SQL script and this script can either be uploaded into the software library by SSA Administrator or made available on a shared location accessible from servers where databases are likely to be provisioned. Here is sample post deployment SQL script using transportable tablespaces. Using DBCA, create a template for the production database – all the init.ora parameters should be included. NOTE: DO NOT choose to bring tablespace data into this template as they will be created SSA Administrator should customize “Create Database Deployment Procedure” and provide DBCA template created in the previous step. In the “Additional Configuration Options” step of the flow, provide the name of the SQL script in the Custom Script section and lock the input. Continue saving the deployment procedure. Now, an SSA user can login to Self Service Portal and use the flow to provision a database that will also populate the data using the post deployment step. More Information: Database-as-a-Service on Exadata Cloud Podcast on Database as a Service using Oracle Enterprise Manager 12c Oracle Enterprise Manager 12c Installation and Administration guide, Cloud Administration guide DBaaS Cookbook Screenwatch: Private Database Cloud: Set Up the Cloud Self-Service Portal Screenwatch: Private Database Cloud: Use the Cloud Self-Service Portal Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Agile Development Requires Agile Support

  - by Matt Watson

  Agile developmentAgile development has become the standard methodology for application development. The days of long term planning with giant Gantt waterfall charts and detailed requirements is fading away. For years the product planning process frustrated product owners and businesses because no matter the plan, nothing ever went to plan. Agile development throws the detailed planning out the window and instead focuses on giving developers some basic requirements and pointing them in the right direction. Constant collaboration via quick iterations with the end users, product owners, and the development team helps ensure the project is done correctly.  The various agile development methodologies have helped greatly with creating products faster, but not without causing new problems. Complicated application deployments now occur weekly or monthly. Most of the products are web-based and deployed as a software service model. System performance and availability of these apps becomes mission critical. This is all much different from the old process of mailing new releases of client-server apps on CD once per quarter or year.The steady stream of new products and product enhancements puts a lot of pressure on IT operations to keep up with the software deployments and adding infrastructure capacity. The problem is most operations teams still move slowly thanks to change orders, documentation, procedures, testing and other processes. Operations can slow the process down and push back on the development team in some organizations. The DevOps movement is trying to solve some of these problems by integrating the development and operations teams more together. Rapid change introduces new problemsThe rapid product change ultimately creates some application problems along the way. Higher rates of change increase the likelihood of new application defects. Delivering applications as a software service also means that scalability of applications is critical. Development teams struggle to keep up with application defects and scalability concerns in their applications. Fixing application problems is a never ending job for agile development teams. Fixing problems before your customers do and fixing them quickly is critical. Most companies really struggle with this due to the divide between the development and operations groups. Fixing application problems typically requires querying databases, looking at log files, reviewing config files, reviewing error logs and other similar tasks. It becomes difficult to work on new features when your lead developers are working on defects from the last product version. Developers need more visibilityThe problem is most developers are not given access to see server and application information in the production environments. The operations team doesn’t trust giving all the developers the keys to the kingdom to log in to production and poke around the servers. The challenge is either give them no access, or potentially too much access. Those with access can still waste time figuring out the location of the application and how to connect to it over VPN. In addition, reproducing problems in test environments takes too much time and isn't always possible. System administrators spend a lot of time helping developers track down server information. Most companies give key developers access to all of the production resources so they can help resolve application defects. The problem is only those key people have access and they become a bottleneck. They end up spending 25-50% of their time on a daily basis trying to solve application issues because they are the only ones with access. These key employees’ time is best spent on strategic new projects, not addressing application defects. This job should fall to entry level developers, provided they have access to all the information they need to troubleshoot the problems.The solution to agile application support is giving all the developers limited access to the production environment and all the server information they need to see. Some companies create their own solutions internally to collect log files, centralize errors or other things to address the problem. Some developers even have access to server monitoring or other tools. But they key is giving them access to everything they need so they can see the full picture and giving access to the whole team. Giving access to everyone scales up the application support team and creates collaboration around providing improved application support.Stackify enables agile application supportStackify has created a solution that can give all developers a secure and read only view of the entire production server environment without console or remote desktop access.They provide a web application that provides real time visibility to the important information that developers need to see. An application centric view enables them to see all of their apps across multiple datacenters and environments. They don’t need to know where the application is deployed, just the name of the application to find it and dig in to see more. All your developers can see server health, application health, log files, config files, windows event viewer, deployment history, application notes, and much more. They can receive email and text alerts when problems arise and even safely query your production databases.Stackify enables companies that do agile development to scale up their application support team by getting more team members involved. The lead developers can spend more time on new projects. Application issues can be fixed quicker than ever. Operations can spend less time helping developers collect server information. Agile application support starts with Stackify. Visit Stackify.com to learn more.

  Read the article

• Need Help in optimizing a loop in C [migrated]

  - by WedaPashi

  I am trying to draw a Checkerboard pattern on a lcd using a GUI library called emWin. I have actually managed to draw it using the following code. But having these many loops in the program body for a single task, that too in the internal flash of the Microcontroller is not a good idea. Those who have not worked with emWin, I will try and explain a few things before we go for actual logic. GUI_REST is a structure which id define source files of emWin and I am blind to it. Rect, REct2,Rec3.. and so on till Rect10 are objects. Elements of the Rect array are {x0,y0,x1,y1}, where x0,y0 are starting locations of rectangle in X-Y plane and x1, y1 are end locations of Rectangle in x-Y plane. So, Rect={0,0,79,79} is a rectangle starts at top left of the LCD and is upto (79,79), so its a square basically. The function GUI_setBkColor(int color); sets the color of the background. The function GUI_setColor(int color); sets the color of the foreground. GUI_WHITE and DM_CHECKERBOARD_COLOR are two color values, #defineed GUI_FillRectEx(&Rect); will draw the Rectangle. The code below works fine but I want to make it smarter. GUI_RECT Rect = {0, 0, 79, 79}; GUI_RECT Rect2 = {80, 0, 159, 79}; GUI_RECT Rect3 = {160, 0, 239, 79}; GUI_RECT Rect4 = {240, 0, 319, 79}; GUI_RECT Rect5 = {320, 0, 399, 79}; GUI_RECT Rect6 = {400, 0, 479, 79}; GUI_RECT Rect7 = {480, 0, 559, 79}; GUI_RECT Rect8 = {560, 0, 639, 79}; GUI_RECT Rect9 = {640, 0, 719, 79}; GUI_RECT Rect10 = {720, 0, 799, 79}; WM_SelectWindow(Win_DM_Main); GUI_SetBkColor(GUI_BLACK); GUI_Clear(); for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(GUI_WHITE); else GUI_SetColor(DM_CHECKERBOARD_COLOR); GUI_FillRectEx(&Rect); Rect.y0 += 80; Rect.y1 += 80; } /* for(j=0,j<11;j++) { for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(GUI_WHITE); else GUI_SetColor(DM_CHECKERBOARD_COLOR); GUI_FillRectEx(&Rect); Rect.y0 += 80; Rect.y1 += 80; } Rect.x0 += 80; Rect.x1 += 80; } */ for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(DM_CHECKERBOARD_COLOR); else GUI_SetColor(GUI_WHITE); GUI_FillRectEx(&Rect2); Rect2.y0 += 80; Rect2.y1 += 80; } for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(GUI_WHITE); else GUI_SetColor(DM_CHECKERBOARD_COLOR); GUI_FillRectEx(&Rect3); Rect3.y0 += 80; Rect3.y1 += 80; } for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(DM_CHECKERBOARD_COLOR); else GUI_SetColor(GUI_WHITE); GUI_FillRectEx(&Rect4); Rect4.y0 += 80; Rect4.y1 += 80; } for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(GUI_WHITE); else GUI_SetColor(DM_CHECKERBOARD_COLOR); GUI_FillRectEx(&Rect5); Rect5.y0 += 80; Rect5.y1 += 80; } for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(DM_CHECKERBOARD_COLOR); else GUI_SetColor(GUI_WHITE); GUI_FillRectEx(&Rect6); Rect6.y0 += 80; Rect6.y1 += 80; } for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(GUI_WHITE); else GUI_SetColor(DM_CHECKERBOARD_COLOR); GUI_FillRectEx(&Rect7); Rect7.y0 += 80; Rect7.y1 += 80; } for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(DM_CHECKERBOARD_COLOR); else GUI_SetColor(GUI_WHITE); GUI_FillRectEx(&Rect8); Rect8.y0 += 80; Rect8.y1 += 80; } for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(GUI_WHITE); else GUI_SetColor(DM_CHECKERBOARD_COLOR); GUI_FillRectEx(&Rect9); Rect9.y0 += 80; Rect9.y1 += 80; } for(i = 0; i < 6; i++) { if(i%2 == 0) GUI_SetColor(DM_CHECKERBOARD_COLOR); else GUI_SetColor(GUI_WHITE); GUI_FillRectEx(&Rect10); Rect10.y0 += 80; Rect10.y1 += 80; }

  Read the article

• Lighting get darker when texture is aplied

  - by noah

  Im using OpenGL ES 1.1 for iPhone. I'm attempting to implement a skybox in my 3d world and started out by following one of Jeff Lamarches tutorials on creating textures. Heres the tutorial: iphonedevelopment.blogspot.com/2009/05/opengl-es-from-ground-up-part-6_25.html Ive successfully added the image to my 3d world but am not sure why the lighting on the other shapes has changed so much. I want the shapes to be the original color and have the image in the background. Before: https://www.dropbox.com/s/ojmb8793vj514h0/Screen%20Shot%202012-10-01%20at%205.34.44%20PM.png After: https://www.dropbox.com/s/8v6yvur8amgudia/Screen%20Shot%202012-10-01%20at%205.35.31%20PM.png Heres the init OpenGL: - (void)initOpenGLES1 { glShadeModel(GL_SMOOTH); // Enable lighting glEnable(GL_LIGHTING); // Turn the first light on glEnable(GL_LIGHT0); const GLfloat lightAmbient[] = {0.2, 0.2, 0.2, 1.0}; const GLfloat lightDiffuse[] = {0.8, 0.8, 0.8, 1.0}; const GLfloat matAmbient[] = {0.3, 0.3, 0.3, 0.5}; const GLfloat matDiffuse[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat matSpecular[] = {1.0, 1.0, 1.0, 1.0}; const GLfloat lightPosition[] = {0.0, 0.0, 1.0, 0.0}; const GLfloat lightShininess = 100.0; //Configure OpenGL lighting glEnable(GL_LIGHTING); glEnable(GL_LIGHT0); glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT, matAmbient); glMaterialfv(GL_FRONT_AND_BACK, GL_DIFFUSE, matDiffuse); glMaterialfv(GL_FRONT_AND_BACK, GL_SPECULAR, matSpecular); glMaterialf(GL_FRONT_AND_BACK, GL_SHININESS, lightShininess); glLightfv(GL_LIGHT0, GL_AMBIENT, lightAmbient); glLightfv(GL_LIGHT0, GL_DIFFUSE, lightDiffuse); glLightfv(GL_LIGHT0, GL_POSITION, lightPosition); // Define a cutoff angle glLightf(GL_LIGHT0, GL_SPOT_CUTOFF, 40.0); // Set the clear color glClearColor(0, 0, 0, 1.0f); // Projection Matrix config glMatrixMode(GL_PROJECTION); glLoadIdentity(); CGSize layerSize = self.view.layer.frame.size; // Swapped height and width for landscape mode gluPerspective(45.0f, (GLfloat)layerSize.height / (GLfloat)layerSize.width, 0.1f, 750.0f); [self initSkyBox]; // Modelview Matrix config glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // This next line is not really needed as it is the default for OpenGL ES glTexEnvi(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); glDisable(GL_BLEND); // Enable depth testing glEnable(GL_DEPTH_TEST); glDepthFunc(GL_LESS); glDepthMask(GL_TRUE); } Heres the drawSkybox that gets called in the drawFrame method: -(void)drawSkyBox { glDisable(GL_LIGHTING); glDisable(GL_DEPTH_TEST); glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_NORMAL_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); static const SSVertex3D vertices[] = { {-1.0, 1.0, -0.0}, { 1.0, 1.0, -0.0}, {-1.0, -1.0, -0.0}, { 1.0, -1.0, -0.0} }; static const SSVertex3D normals[] = { {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0}, {0.0, 0.0, 1.0} }; static const GLfloat texCoords[] = { 0.0, 0.5, 0.5, 0.5, 0.0, 0.0, 0.5, 0.0 }; glLoadIdentity(); glTranslatef(0.0, 0.0, -3.0); glBindTexture(GL_TEXTURE_2D, texture[0]); glVertexPointer(3, GL_FLOAT, 0, vertices); glNormalPointer(GL_FLOAT, 0, normals); glTexCoordPointer(2, GL_FLOAT, 0, texCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, 4); glDisableClientState(GL_VERTEX_ARRAY); glDisableClientState(GL_NORMAL_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glEnable(GL_LIGHTING); glEnable(GL_DEPTH_TEST); } Heres the init Skybox: -(void)initSkyBox { // Turn necessary features on glEnable(GL_TEXTURE_2D); glEnable(GL_BLEND); glBlendFunc(GL_ONE, GL_SRC_COLOR); // Bind the number of textures we need, in this case one. glGenTextures(1, &texture[0]); // create a texture obj, give unique ID glBindTexture(GL_TEXTURE_2D, texture[0]); // load our new texture name into the current texture glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); NSString *path = [[NSBundle mainBundle] pathForResource:@"space" ofType:@"jpg"]; NSData *texData = [[NSData alloc] initWithContentsOfFile:path]; UIImage *image = [[UIImage alloc] initWithData:texData]; GLuint width = CGImageGetWidth(image.CGImage); GLuint height = CGImageGetHeight(image.CGImage); CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); void *imageData = malloc( height * width * 4 ); // times 4 because will write one byte for rgb and alpha CGContextRef cgContext = CGBitmapContextCreate( imageData, width, height, 8, 4 * width, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big ); // Flip the Y-axis CGContextTranslateCTM (cgContext, 0, height); CGContextScaleCTM (cgContext, 1.0, -1.0); CGColorSpaceRelease( colorSpace ); CGContextClearRect( cgContext, CGRectMake( 0, 0, width, height ) ); CGContextDrawImage( cgContext, CGRectMake( 0, 0, width, height ), image.CGImage ); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, width, height, 0, GL_RGBA, GL_UNSIGNED_BYTE, imageData); CGContextRelease(cgContext); free(imageData); [image release]; [texData release]; } Any help is greatly appreciated.

  Read the article

• CodePlex Daily Summary for Monday, June 02, 2014

  CodePlex Daily Summary for Monday, June 02, 2014Popular ReleasesPortable Class Library for SQLite: Portable Class Library for SQLite - 3.8.4.4: This pull request from mattleibow addresses an issue with custom function creation (define functions in C# code and invoke them from SQLite as id they where regular SQL functions). Impact: Xamarin iOSTweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.GenerateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweets- Add mis...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Vi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew Projects[ISEN] Rendu de projet Naughty3Dogs - Pong3D: Pong3D est un jeu qui reprend le principe classique du Pong en le portant dans un environnement 3D à l'aide du langage c# et du moteur Unity3DBootstrap for MVC: Bootstrap for MVC.F. A. Q. - Najczesciej zadawane pytania: FAQForuMvc: Technifutur short projecthomework456: no.iStoody: Studies organize solution, available through app for Windows and Windows Phone.liaoliao: ???????????Price Tracker: Allows a user to track prices based on parsed emailsRoslynEval: RoslynRx Hub: Rx Hub provides server side computation which initiate by subscriber requestSharepoint Online AppCache Reset: We are an IT resource company providing Virtual IT services and custom and opensource programs for everyday needs. UnitConversionLib : Smart Unit Conversion Library in C#: Conversion of units, arithmetic operation and parsing quantities with their units on run time. Smart unit converter and conversion lib for physical quantities,

  Read the article

• Database Owner Conundrum

  - by Johnm

  Have you ever restored a database from a production environment on Server A into a development environment on Server B and had some items, such as Service Broker, mysteriously cease functioning? You might want to consider reviewing the database owner property of the database. The Scenario Recently, I was developing some messaging functionality that utilized the Service Broker feature of SQL Server in a development environment. Within the instance of the development environment resided two databases: One was a restored version of a production database that we will call "RestoreDB". The second database was a brand new database that has yet to exist in the production environment that we will call "DevDB". The goal is to setup a communication path between RestoreDB and DevDB that will later be implemented into the production database. After implementing all of the Service Broker objects that are required to communicate within a database as well as between two databases on the same instance I found myself a bit confounded. My testing was showing that the communication was successful when it was occurring internally within DevDB; but the communication between RestoreDB and DevDB did not appear to be working. Profiler to the rescue After carefully reviewing my code for any misspellings, missing commas or any other minor items that might be a syntactical cause of failure, I decided to launch Profiler to aid in the troubleshooting. After simulating the cross database messaging, I noticed the following error appearing in Profiler: An exception occurred while enqueueing a message in the target queue. Error: 33009, State: 2. The database owner SID recorded in the master database differs from the database owner SID recorded in database '[Database Name Here]'. You should correct this situation by resetting the owner of database '[Database Name Here]' using the ALTER AUTHORIZATION statement. Now, this error message is a helpful one. Not only does it identify the issue in plain language, it also provides a potential solution. An execution of the following query that utilizes the catalog view sys.transmission_queue revealed the same error message for each communication attempt: SELECT     * FROM        sys.transmission_queue; Seeing the situation as a learning opportunity I dove a bit deeper. Reviewing the database properties  The owner of a specific database can be easily viewed by right-clicking the database in SQL Server Management Studio and selecting the "properties" option. The owner is listed on the "General" page of the properties screen. In my scenario, the database in the production server was created by Frank the DBA; therefore his server login appeared as the owner: "ServerName\Frank". While this is interesting information, it certainly doesn't tell me much in regard to the SID (security identifier) and its existence, or lack thereof, in the master database as the error suggested. I pulled together the following query to gather more interesting information: SELECT     a.name     , a.owner_sid     , b.sid     , b.name     , b.type_desc FROM        master.sys.databases a     LEFT OUTER JOIN master.sys.server_principals b         ON a.owner_sid = b.sid WHERE     a.name not in ('master','tempdb','model','msdb'); This query also helped identify how many other user databases in the instance were experiencing the same issue. In this scenario, I saw that there were no matching SIDs in server_principals to the owner SID for my database. What login should be used as the database owner instead of Frank's? The system stored procedure sp_helplogins will provide a list of the valid logins that can be used. Here is an example of its use, revealing all available logins: EXEC sp_helplogins;  Fixing a hole The error message stated that the recommended solution was to execute the ALTER AUTHORIZATION statement. The full statement for this scenario would appear as follows: ALTER AUTHORIZATION ON DATABASE:: [Database Name Here] TO [Login Name]; Another option is to execute the following statement using the sp_changedbowner system stored procedure; but please keep in mind that this stored procedure has been deprecated and will likely disappear in future versions of SQL Server: EXEC dbo.sp_changedbowner @loginname = [Login Name]; .And They Lived Happily Ever After Upon changing the database owner to an existing login and simulating the inner and cross database messaging the errors have ceased. More importantly, all messages sent through this feature now successfully complete their journey. I have added the ownership change to my restoration script for the development environment.

  Read the article

• First Foray&ndash;About timeout

  - by SQLMonger

  It has been quite a while since I signed up for this blog site and high time that something was posted.  I have a list of topics that I will be working through and posting.  Some I am sure will have been posted by others, but I will be sticking to the technical problems and challenges that I’ve recently faced, and the solutions that worked for me.  My motto when learning something new has always been “My kingdom for an example!”, and I plan on delivering useful examples here so others can learn from my efforts, failures and successes.   A bit of background about me… My name is Clayton Groom. I am a founding partner of a consulting firm in St. Louis Missouri, Covenant Technology Partners, LLC and focus on SQL Server Data Warehouse design, Analysis Services and Enterprise Reporting solutions.  I have been working with SQL Server since the early nineties, when it still only ran on OS/2. I love solving puzzles and technical challenges.   Enough about me… On to a real problem… SSIS Connection Time outs versus Command Time outs Last week, I was working on automating the processing for a large Analysis Services cube.  I had reworked an SSIS package and script task originally posted by Vidas Matelis that automates the process of adding new and dropping old partitions to/from an Analysis Services cube.  I had the package working great, tested, and ready for deployment.  It basically performs a query against the source system to determine if there is new data in the warehouse that will require a new partition to be added to the cube, and it checks the cube to see if there are any partitions that are present that are no longer needed in a rolling 60 month window. My client uses Tivoli for running all their production jobs, and not SQL Agent, so I had to build a command line file for Tivoli to use to run the package. Everything was going great. I had tested the command file from my development workstation using an XML configuration file to pass in server-specific parameters into the package when executed using the DTExec utility. With all the pieces ready, I updated the dtsconfig file to point to the UAT environment and started working with the Tivoli developer to test the job.  On the first run, the job failed, and from what I could see in the SSIS log, it had failed because of a timeout. Other errors in the log made me think that perhaps the connection string had not been passed into the package correctly. We bumped the Connection Manager  timeout values from 20 seconds to 120 seconds and tried again. The job still failed. After changing the command line to use the /SET option instead of the /CONFIGFILE option, we tested again, and again failure. After a number more failed attempts, and getting the Teradata DBA involved to monitor and see if we were connecting and failing or just failing to connect, we determined that the job was indeed connecting to the server and then disconnecting itself after 30 seconds.  This seemed odd, as we had the timeout values for the connection manager set to 180 seconds by then.  At this point one of the DBA’s found a post on the Teradata forum that had the clues to the puzzle: There is a separate “CommandTimeout” custom property on the Data source object that may needed to be adjusted for longer running queries.  I opened up the SSIS package, opened the data flow task that generated the partition list table and right-clicked on the data source. from the context menu, I selected “Show Advanced Editor” and found the property. Sure enough, it was set to 30 seconds. The CommandTimeout property can also be edited in the SSIS Properties sheet. In order to determine how long the timeout needed to be, I ran the query from the task in the development environment and received a response in a matter of seconds.  I then tried the same query against the production database and waited several minutes for a response. This did not seem to be a reasonable response time for the query involved, and indeed it wasn’t. The Teradata DBA’s adjusted the query governor settings for the service account I was testing with, and we were able to get the response back down under a minute.  Still, I set the CommandTimeout property to a much higher value in case the job was ever started during a time of high-demand on the production server. With this change in place, the job finally completed successfully.  The lesson learned for me was two-fold: Always compare query execution times between development and production environments, and don’t assume that production will always be faster.  With higher user demands, query governors, and a whole lot more data, the execution time of even what might seem to be simple queries can vary greatly. SSIS Connection time out settings do not affect command time outs.  Connection timeouts control how long the package will wait for a response from the server before assuming the server is not available or is not responding. Command time outs control how long a task will wait for results to start being returned before deciding that the server is not responding. Both lessons seem pretty straight forward, and I felt pretty sheepish once I finally figured out what the issue was.  To be fair though, In the 5+ years that I have been working with SSIS, I could only recall one other time where I had to set the CommandTimeout property, and that memory only resurfaced while I was penning this post.

  Read the article

• ASP.NET: Using pickup directory for outgoing e-mails

  - by DigiMortal

  Sending e-mails out from web applications is very common task. When we are working on or test our systems with real e-mail addresses we don’t want recipients to receive e-mails (specially if we are using some subset of real data9. In this posting I will show you how to make ASP.NET SMTP client to write e-mails to disc instead of sending them out. SMTP settings for web application I have seen many times the code where all SMTP information is kept in app settings just to read them in code and give to SMTP client. It is not necessary because we can define all these settings under system.web => mailsettings node. If you are using web.config to keep SMTP settings then all you have to do in your code is just to create SmtpClient with empty constructor. var smtpClient = new SmtpClient(); Empty constructor means that all settings are read from web.config file. What is pickup directory? If you want drastically raise e-mail throughput of your SMTP server then it is not very wise plan to communicate with it using SMTP protocol. it adds only additional overhead to your network and SMTP server. Okay, clients make connections, send messages out and it is also overhead we can avoid. If clients write their e-mails to some folder that SMTP server can access then SMTP server has e-mail forwarding as only resource-eager task to do. File operations are way faster than communication over SMTP protocol. The directory where clients write their e-mails as files is called pickup directory. By example, Exchange server has support for pickup directories. And as there are applications with a lot of users who want e-mail notifications then .NET SMTP client supports writing e-mails to pickup directory instead of sending them out. How to configure ASP.NET SMTP to use pickup directory? Let’s say, it is more than easy. It is very easy. This is all you need. <system.net>   <mailSettings>     <smtp deliveryMethod="SpecifiedPickupDirectory">       <specifiedPickupDirectory pickupDirectoryLocation="c:\temp\maildrop\"/>     </smtp>   </mailSettings> </system.net> Now make sure you don’t miss come points: Pickup directory must physically exist because it is not created automatically. IIS (or Cassini) must have write permissions to pickup directory. Go through your code and look for hardcoded SMTP settings. Also take a look at all places in your code where you send out e-mails that there are not some custom settings used for SMTP! Also don’t forget that your mails will be written now to pickup directory and they are not sent out to recipients anymore. Advanced scenario: configuring SMTP client in code In some advanced scenarios you may need to support multiple SMTP servers. If configuration is dynamic or it is not kept in web.config you need to initialize your SmtpClient in code. This is all you need to do. var smtpClient = new SmtpClient(); smtpClient.DeliveryMethod = SmtpDeliveryMethod.SpecifiedPickupDirectory; smtpClient.PickupDirectoryLocation = pickupFolder; Easy, isn’t it? i like when advanced scenarios end up with simple and elegant solutions but not with rocket science. Note for IIS SMTP service SMTP service of IIS is also able to use pickup directory. If you have set up IIS with SMTP service you can configure your ASP.NET application to use IIS pickup folder. In this case you have to use the following setting for delivery method. SmtpDeliveryMethod.PickupDirectoryFromIis You can set this setting also in web.config file. <system.net>   <mailSettings>     <smtp deliveryMethod="PickupDirectoryFromIis" />   </mailSettings> </system.net> Conclusion Who was still using different methods to avoid sending e-mails out in development or testing environment can now remove all the bad code from application and live on mail settings of ASP.NET. It is easy to configure and you have less code to support e-mails when you use built-in e-mail features wisely.

  Read the article

< Previous Page | 542 543 544 545 546 547 548 549 550 551 552 553  | Next Page >