Search Results

Search found 19703 results on 789 pages for 'virtual ip'.

Page 548/789 | < Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >

• BGP Router reccomendations for simple redundancy [closed]

  - by Jona

  We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

  Read the article

• Deleting pagefile.sys on shutdown

  - by Daniel E. Shub

  I have a Windows XP machine (it is a VM running in Xen) that I would like to backup. I have enabled ClearPageFileAtShutdown by following MS KB 314834. If I cleanly shutdown the XP machine and then mount the drive in another machine (which is trivial since the machine is virtual) I still have a large pagefile.sys. I was hoping that enabling ClearPageFileAtShutdown would result in a pagefile.sys with a size near zero. I have two questions. First, is it possible to have pagefile.sys be deleted, or have a drastic size reduction, at shutdown? Second, can I exclude pagefile.sys from my backup?

  Read the article

• a load balancing scenario using HAProxy and keepalived shows no performance advantage

  - by chakoshi

  Hi, I am trying to setup a load balanced web server scenario, using two HAproxy load balancers and two debian web servers following this guide http://www.howtoforge.com/setting-up-a-high-availability-load-balancer-with-haproxy-keepalived-on-debian-lenny. the setup is working but the results of simple performance benchmarking is not what I expected. I tried apache benchmark tool to send lots of requests to servers (one time directly testing one of the web servers and the other time testing through the load balancer) using the command "ab -n 1000000 -c 500 http://IP/index.html", but the test results shows better performance for the single server without load balancer. can any one tell me if I'm going wrong on some thing?

  Read the article

• test if master dns has trasnfered copt to slave

  - by su55

  Hello, I setup my master and slave using freebsd. im currently running the Bind 9.X version, so far everything is working successfully. Just one small problem. I cant get the master copy of my dns to transfer it to the slave server. i included transfer-allow {192.168.1.111;}; // this is the slave servers ip i ran the rndc reload command to check but i dont see the copy in the /etc/named/master/? Any help would be necessary and if you like the layout of my dns, I can provide that too.

  Read the article

• No response from example.com using Apache

  - by stevens-G

  I am unable to access example.com or by local IP after restarting the server. I checked to make sure httpd service was on. I looked at the error_log in /var/log/httpd and found nothing. Tried to restart httpd again and it says 'Ok'. I'm not sure where else to check. I did move DocumentRoot from /var/www to /web-root and it worked before restarting the server. I tried pointing it back to /var/www and still not able to view the page. IPtables have not changed. Any suggestions?

  Read the article

• FreeBSD's VPN & Mac OS X IPSecuritas

  - by alexus

  I need to be able to VPN in to my FreeBSD server from my Mac using IPSecuritas. I was wondering if anyone ever done something, I'm reading VPN over IPsec but that mainly covers if you had 2 nodes with 2 public IP address. My endpoint in IPSecuritas configured with MODE_CFG enabled so it'll have the other node to query my address from it's coming from. SSH is out of question, this is not a VPN solution, people who'd end up using VPN wouldn't know what to do, so I need very simple VPN the one that you get to use almost anywhere, you have a client and you have server, client makes a connection to server and boom, you in...

  Read the article

• How to interpret IOZone results?

  - by homer5439

  Here are the resuts of running IOZone on an ext3 filesystem on an LVM volume residing on a SAN LUN (it was ran with 5 parallel processes). "Throughput report Y-axis is type of test X-axis is number of processes" "Record size = 4 Kbytes " "Output is in Kbytes/sec" " Initial write " 81628.55 " Rewrite " 83354.72 " Read " 115595.02 " Re-read " 119306.09 " Reverse Read " 47684.20 " Stride read " 10011.09 " Random read " 16751.27 " Mixed workload " 5659.77 " Random write " 1661.85 " Pwrite " 36030.83 Now this is all nice and dandy, but my question is: how do I know whether the values are as good as they could be or there is something to tweak (and if so, what?) The actual usage I will have for that Logical Volume is to act as virtual disk for a VM.

  Read the article

• One EC2 source with distributed varnish machines

  - by Elad Lachmi

  I have a web site hosted in an EC2 instance (2008 r2 + iis7.5 + sql server). I put one linux box running RHEL with varnish. After some configuration trail and error, I found a configuration that works. Now I want to duplicate the varnish boxes to other availability zones, but continue to pull the pages from the original windows box. It is my understanding that I can put the varnish boxes in different zones and pull from the windows box via it's external IP. But what do I need to do in order for each user to receive content from the box physically closest to them? Is this even possible? Thank you!

  Read the article

• Setting up WAMP to run on a LAN

  - by Steve

  I've installed WAMP on a Windows 7 PC, and it is running fine locally, as localhost. I want PCs on the LAN to be able to view the local server. When they load my PC's IP address in their browser, they receive a "You don't have permission to access / on this server" error. I followed this guide, but the issue remains. To recap: I've added an inbound exception to Windows Firewall for port 80 for Private and Domain connections. I've edited Apache's httpd.conf to include: Listen 80 Listen 192.168.0.5:80 < Directory "c:/wamp/www/wordpress/" allow from all < /Directory I've edited httpd-vhosts.conf to include: < VirtualHost 192.168.0.5:80 DocumentRoot "C:/wamp/www/wordpress" < /VirtualHost Any ideas?

  Read the article

• Why change net.inet.tcp.tcbhashsize in FreeBSD?

  - by sh-beta

  In virtually every FreeBSD network tuning document I can find: # /boot/loader.conf net.inet.tcp.tcbhashsize=4096 This is usually paired with some unhelpful statement like "TCP control-block hash table tuning" or "Set this to a reasonable value." man 4 tcp isn't much help either: tcbhashsize Size of the TCP control-block hash table (read-only). This may be tuned using the kernel option TCBHASHSIZE or by setting net.inet.tcp.tcbhashsize in the loader(8). The only document I can find that touches on this mysterious thing is the Protocol Control Block Lookup subsection beneath Transport Layer in Optimizing the FreeBSD IP and TCP Stack, but its description is more about potential bottlenecks in using it. It seems tied to matching new TCP segments to their listening sockets, but I'm not sure how. What exactly is the TCP Control Block used for? Why would you want to set its hash size to 4096 or any other particular number?

  Read the article

• Running Multiple sites with multiple domains apache

  - by PsychoData

  I am having a rough time running apache and using multiple domain names here is a snippet of my config file. I keep getting a error saying that NameVirtualHost has no VirtualHosts. I want them both running on the same IP and I'm not sure why this doesn't work. I've been digging through the documentation for VirtualHosts, NameVirtualHost, and apache's page about name based virtual hosting. That example in the name based page is almost exactly my config! What am I doing wrong? Listen *:80 NameVirtualHost *:80 <VirtualHost *:80> ServerName www.sample1.net DocumentRoot /var/www/sample1-net </VirtualHost> <VirtualHost *:80> ServerName www.example2.net DocumentRoot /var/www/example2-net </VirtualHost>

  Read the article

• Streaming video in Virtualbox jumpy

  - by Kevin

  I am trying to get Netflix to work on my Ubuntu netbook. I know it will not run in Linux so I am trying it in my Win XP virtual machine. It streams the video but the sound and video are out of sync and the video often freezes and jumps. I have tried Firefox, Chrome, and even IE. I am thinking my Atom N455 processor does not work well with virtualization. All other apps in the VM work fine. The only issue is streaming [YouTube is jumpy too].Does anyone know of Virtualbox settings I can try to possibly fix this issue or am I out of luck?

  Read the article

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• nginx proxy pass redirect through load balancer

  - by Brian

  I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

  Read the article

• Mikrotik queues and limiting total upstream bandwidth

  - by g18c

  With a Mikrotik router (form of embedded Linux) I have created simple queues per machine matched by source IP address. Each of the 4 machine queues has an unlimited burst 3Mbps/3Mbps for Tx/Rx. During speedtest.net on all 4 machines at the same time, each machine shows 3Mbps (and is limited correctly there), however the total bandwidth on the uplink goes to 12Mbps (i need to set this to 10Mbps max for the upstream). I want to restrict the actual traffic passing across the uplink port to 10Mbps regardless of what the other queues are doing (I need this catch all queue to have the final say on the uplink speed). For example I need: Scenario A Machine A transferring @ 3Mbps Machine B transferring @ 3Mbps Machine C transferring @ 3Mbps Machine D transferring @ 0Mbps Up-link speed = 9Mbps Scenario B Machine A trying to transfer @ 3Mbps Machine B trying to transfer @ 3Mbps Machine C trying to transfer @ 3Mbps Machine D trying to transfer @ 3Mbps Up-link speed = 10Mbps Actual transfer speed of machine A,B,C,D = 2.5Mbps This is to allow slight over subscription of bandwidth queues as not all will be transmitting at 3Mbps all the time. Is this possible and if so how would one go about doing this?

  Read the article

• mailman not relaying email to external address

  - by gozzilli

  I have a setup of mailman with postfix on an ubuntu server 12.04. My problem is that mailing list emails are not forwarded to email addresses external to my institution. However the initial welcome email is received by everyone, internally and externally. in fact, a simple email from command line with mail is successfully sent to anyone after that, mailing list emails are only forwarded to internal addresses. the domain name I'm using for the server is not that of my institution who is hosting the server. Here is my main.cf: myorigin = sub.myinstitution.tld mynetworks = 127.0.0.0/8 xxx.xxx.xxx.xxx/16 # this is my institution ip range relayhost = smtp.myinstitution.tld inet_interfaces = loopback-only local_transport = error:local delivery is disabled virtual_alias_maps = hash:/etc/postfix/virtual smtpd_recipient_restrictions = permit_mynetworks myhostname = mywebsite.tld mydestination = $myhostname, localhost.$mydomain, localhost I also found these two links on serverfault and ubuntu forums, but neither of these solutions seem to do the trick for me. Any help would be much appreciated.

  Read the article

• FTP script download from linux to windows

  - by user53864

  I'm using following FTP script on windows xp to download zip files from ubuntu cloud servers. A zip file is created every day on ubutnu servers and I will download it to windows via this ftp script. I run this script everyday manually as I have to edit the last line(mget /usr/backup_02-11-2010.Zip) of the script to match today's date. I want to edit this script so that it will download only today's zip file at the scheduled time without needing to edit it everyday, when scheduled. It's clear that date is appended to the zip files and is in the format dd-mm-yyyy. Need help... open server-ip-here username-here user-password-here lcd C:\Backup\files bin hash prompt mget /usr/backup_02-11-2010.zip

  Read the article

• Port Redirection on Mac OS X Lion

  - by Andreas

  I have tried to solve this issue using pf but with no luck. Basically, I am trying to redirect incoming port 443 traffic to port 22. I have tried to set up a rule in a file and load it in pf but I get syntax error. Can anyone with more experience with pf provide some insight? Here's what I've attempted: pass in on en1 proto tcp from any to any port 443 rdr-to 127.0.0.1 port 22 and pass in quick proto tcp to port 443 rdr-to 127.0.0.1 port 22 I've been able to do this in MacOSX Snow Leopard with ipfw: sudo ipfw add 1443 forward 127.0.0.1,22 ip from any to any 443 in but it doesn't work in Lion (it gives me an Invalid Argument error).

  Read the article

• Setting up wifi router as a switch for Internet Connection Sharing

  - by William C

  Can my laptop with a 3G connection share its Internet via a Wifi router (Dlink DIR-615)? I turned Internet Connection Sharing on and Windows assigned 192.168.137.1 to my laptop's LAN adapter. Do I connect my laptop to the WAN port or to the LAN port of the router? What should I set as my router's IP address? Do I turn DHCP on my router on? Do I assign 192.168.137.x as static addresses on the other computers? If not, what? Is there anything else I need to set on my router? Thank you!

  Read the article

• Instructions to setup domain controller

  - by Robert Koritnik

  Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a network adapter to linksys and a virtual adapter to DC DC machine has two network adapters: one to linksys (to be inetrnet connected) and one to host (my dev Win7 machine)

  Read the article

• RDP add domain users broken

  - by Robuust

  I have 3 servers, - domain controller with dns services - dhcp/rras - file/random server with files stored on it and nothing special so far. All servers have static IP's All servers are in the same domain (SOFTWARE) RDP is enabled for all 3 servers All servers are Windwos Server 2008 R2 I can connect to the DHCP/RRAS server via RDP I cannot connect to DC and File server When I add RPD users (both are domain admin for testing) to the File server they show up like this: What is happening what I don't see? And additional why don't I even get a login screen for RPD? Thanks in advance.

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• Subdomain only accessible from one computer

  - by Edan Maor

  I recently added a wildcard A record to my domain (*.root.com), mapping it to a certain elastic ip on AWS. I've configured apache to redirect all references to something.root.com to root.com, except for one specific "dev" subdomain, which is hosting its own site (a Django app, specifically). The Problem: This setup works perfectly for me on my computer. But on other computers around the office, it doesn't seem to work. Specifically, trying to visit dev.root.com gives an "unable to find server" error. Pinging dev.root.com gives a "cannot resolve hostname" error. The weird thing: pinging any other subdomain of root.com does work, from all machines. I would think this was all due to DNS propagation, except all the computers are behind the same office router, so how could that be the case? Any ideas?

  Read the article

• fail2ban on server with LXC Containers

  - by RoboTamer

  The issue is modprobe and iptables don't work inside an LXC Container. LXC is the userspace control package for Linux Containers, a lightweight virtual system mechanism sometimes described as “chroot on steroids”. iptables error inside the container is: # iptables -I INPUT -s 122.129.126.194 -j DROP > iptables v1.4.8: can't initialize iptables table `filter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. I am guessing that it can't work because the LXC containers share one kernel, the main server kernel. How do I do fail2ban in this case. modprobe and iptables work in the main server so I could install it there and link to the logfiles somehow, my guess? Any suggestions?

  Read the article

• Single hardware unit to protect web servers and implement smart publishing

  - by Maxim V. Pavlov

  Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

  Read the article

< Previous Page | 544 545 546 547 548 549 550 551 552 553 554 555  | Next Page >