Search Results

Search found 19703 results on 789 pages for 'virtual ip'.

Page 550/789 | < Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >

• Routing application traffic through specific interface

  - by UnicornsAndRainbows

  Hello All! First question here, so please go easy: I have a debian linux 5.0 server with two public interfaces. I would like to route outbound traffic from one instance of an application via one interface and the second instance through the second interface. There are some challenges: both instances of the application use the same protocol both instances of the application can access the entire internet (can't route based on dest network) I can't change the code of the application I don't think a typical approach to load balancing all traffic is going to work well, because there are relatively few destination servers being accessed in the outbound traffic, and all traffic would really need to be distributed pretty evenly across these relatively few servers. I could probably run two virtualized servers on the box and bind each of them to a different external ip, but I'm looking for a simpler solution, maybe using iproute or iptables? Any ideas for me? Thanks in advance - and I'm happy to answer any questions.

  Read the article

• There is a porn domain pointing to my site

  - by Nicolas Martel

  Let's say example.com is my real site, and fooexample.com is the porn site. fooexample.com are pointing to my ip. Now you could think, just don't mind it right. Well the thing is that they are driving load of traffic. Not only that, but my main domain example.com become unavailable after a couple of minutes and the only domain that work is either fooexample.com or none of those 2. What i have done so far was using mod_rewrite to redirect the porn site to google but my domain still become unavailable. Blocking the ips served no result either. I hope someone will be able to help me because this is a huge problem right now. Thanks.

  Read the article

• What is a preferred method for automatically configuring and setting up an Ubuntu instance?

  - by sutch

  I am tired of manually configuring instances of Ubuntu for testing web applications and for setting up workstations. I'm even more frustrated by the issues caused by inconsistent configurations. Is there a method (hopefully not too time consuming to learn and setup) that allows for automation of the setup and configuration of an Ubuntu server or workstation from an ISO. This is primarily for virtual machine instances, but it would be helpful to also create instances on hardware. I am specifically looking for a method to automate the installation of libraries (apt-get), configure services (such as Apache and MySQL), add 3rd party software (download, extract and build), and add libraries to scripting languages (for example, Ruby Gems or CPAN packages for Perl).

  Read the article

• Linux IPv6: DHCP and /127 prefixes

  - by Jeff Ferland

  I've tried multiple pieces of DHCP client and software in attempting to setup a solution for allocating a /127 prefix to virtual machines so that each maintains its own layer 2 isolation. Because there would only be one host assigned to each network, a /64 is impractical. While the prefix size could reasonably be somewhere in the /64-127 range, the crux of the problem has been the same regardless of the software used in configuring: the DHCP call to bring up the interface uses the address advertised by DHCPv6 and inserts two routes: the /127 given by the router advertising packets and a /64 as well. Any thoughts on why I'm getting the additional route added across dhcp client vendors?

  Read the article

• Set global handling for PHP scripts in NGINX + PHP-FPM

  - by Radio

  I have to define fastcgi_pass for every virtual host. How do I define it global-wise? server { listen 80; server_name www.domain.tld; location / { root /home/user/www.domain.tld; index index.html index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/user/domain.tld$fastcgi_script_name; include fastcgi_params; } }

  Read the article

• Unable to connect to Cygwin from Mac OS X by ssh

  - by skyjack

  I've started ssh server on Windows 7 using Cywgin and I'm trying to connect to it by ssh from Mac OS X Mavericks. It fails with next error: ./ssh username@hostname -v OpenSSH_6.6, OpenSSL 1.0.1g 7 Apr 2014 debug1: Reading configuration data /usr/local/etc/ssh/ssh_config debug1: Connecting to hostname [my ip] port 22. debug1: Connection established. debug1: identity file /Users/skyjack/.ssh/id_rsa type -1 debug1: identity file /Users/skyjack/.ssh/id_rsa-cert type -1 debug1: identity file /Users/skyjack/.ssh/id_dsa type -1 debug1: identity file /Users/skyjack/.ssh/id_dsa-cert type -1 debug1: identity file /Users/skyjack/.ssh/id_ecdsa type -1 debug1: identity file /Users/skyjack/.ssh/id_ecdsa-cert type -1 debug1: identity file /Users/skyjack/.ssh/id_ed25519 type -1 debug1: identity file /Users/skyjack/.ssh/id_ed25519-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.6 ssh_exchange_identification: read: Connection reset by peer Meanwhile I can connect successfully from Red Hat. OpenSSH version on Cygwin: OpenSSH_6.4p1, OpenSSL 1.0.1f 6 Jan 2014 OpenSSH version on MAC OS X: OpenSSH_6.6p1, OpenSSL 1.0.1g 7 Apr 2014 Please advice.

  Read the article

• Best practice for scaling a single application source to multiple nodes

  - by Andrew Waters

  I have an application which needs to scale horizontally to cover web and service nodes (at the moment they're all on one) but interact with the same set of databases and source files (both application code and custom assets). Database is no problem, it's handled already with replication in MongoDB. Also, the configuration of the servers are the same (100% linux). This question is literally about sharing a filesystem between machines so that its content is always correct, regardless of the node accessing it. My two thoughts have so far been NFS and SAN - SAN being prohibitively expensive and NFS seeing some performance issues on the second node with regards to glob()ing in PHP. Does anyone have recommended strategies or other techniques that don't involved sharding data across nodes or any potential gotchas in NFS that may cause slow disk seek times? To give you an idea of the scale, the main node initialises it's application modules in ~ 0.01 seconds. The secondary is taking ~2.2 seconds. They're VM's inside a local virtual network in ESXi and ping time between them is ~0.3ms

  Read the article

• veriSign SSL Cert for subdomain

  - by Asghar

  I have purchase SSL for secure Site from Verisign. I have configured it and its working properly on https://www.example.com . I have subdomain app.example.com . i need to work SSL on this domain also. I have 2 Questions. 1- Will same SSL will work for the subdomain too? [My SSL is not wildcard SSL] 2- If it will not work. then how can i change the same SSL that it should only work on app.example.com. i mean is there any way to change purchased SSL for subdomain. and How can i do this. https://www.example.com and http://app.example.com point to the same IP address xxx.xxx.xxx.xxx

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• How do I create a guest ftp user and give access to specific sub-folder with SSH?

  - by gourav

  I just got a virtual dedicated server at GoDaddy. I got the Simple Control Panel. There doesn't seem to be a way to create a guest ftp user through this control panel and I was told it must be created through SSH. I have a program called Putty which can log into the server via SSH. I'm familiar with logging in but does anyone know what the commands are to be used to create a guest ftp user and give them Read and Write access to a particular folder? Regards gourav

  Read the article

• How do you manage updates without a staging environment: CentOS 6.3

  - by Gregg Leventhal

  I am managing about 20 servers, many of them virtual. They are almost all different purpose, and none are clustered. I have a distributed LAMP stack, a few application servers, some build servers, a few KVM hosts. They are CentOS 6.3 mostly with a few Ubuntu (unfortunately). I don't have the resources to setup a staging environment where I can have duplicates of my machines and test updates before rolling them out. I am taking file backups. What I want to know is how you are approaching backing up your Linux systems. I assume you don't just do yum update, but then how are you choosing the packages worthy of updating? When (if ever) are you updating the kernel, etc.. How do you test updates without a staging environment? Snapshot and hope for the best?

  Read the article

• DNS not responding

  - by Born2win

  I have a Dlink DIR-615 router and I have it around six mounths. My internet connection is VPN (PPTP) based i.e. I have been give a username and password from my isp and my ip address is dynamic. But from few days I am experiencing a serious problem. My router connects normally (i can see yellow light) but my computer is giving "DNS not responding" error. I have tried everything (reset,reboot etc) but no sucess. Any help would be appreciated :)

  Read the article

• Can't access LAN computers with SSH

  - by endolith

  I got a new Windows 7 machine, and was using VNC,SSH etc to connect to my Ubuntu machine, and it worked fine previously. Now it doesn't work if I use the machine's hostname or local IP, but if I use the DynDNS name, it works. I can also access it from my Android phone using the local hostname over SSH. If I try to connect with SSH to the hostname, it says "Host does not exist". VNC says "Failed to get server address". NX says "no address associated with name", and I don't see it in Windows' "Network" folder. I've rebooted everything. I've turned off Windows firewall. It was working fine a few days ago, but now it's not. How do I figure out what's blocking it?

  Read the article

• Address VMWare Fusion Linux guest by hostname?

  - by amrox

  I have a Ubuntu Server 9.04 image set up in VMWare Fusion 3.0.0, using the NAT option for the guest's network connection. From the Mac host, I can ssh to the linux guest just fine using it's IP address, but I would like to be able to refer to it by hostname for connivence. ie: mac-host:~ ssh [email protected] I had a similar setup using Parallels a couple years ago, but I don't remember how it was set up. It may have "just worked". Any suggestion on how to make this work?

  Read the article

• Xmail shows error at Gmail

  - by Karthik Malla

  Hello I am using Xmail server at IP 65.75.241.26 hosted at www.softmail.me using which I can send and receive email to/from all email service providers but unable to receive back from Gmail. This error lies only with Gmail. Experts says that Gmail requires proper working MX records where as for other emailing providers do not bother much. Is MX records the solution for my problem? Or is there any other issue? My mailserver outgoing at softmail.me:25 My mailserver incoming at softmail.me:110 Please help me how to get rid of this issue.

  Read the article

• How to authorize standard users to install drivers on Windows XP

  - by Dr I

  I'm currently looking for a way to autorize my non administrators users to perform an installation of drivers. Here is the speech: All my users are standard users, they got a VirtualBox Hypervisor if they need the administrator rights. But if they put an USB device on the local machine and try to redirect the device to the Virtual Machine, Windows ask for some Administrator rights. I've try to set up those GPO: Allow standard users to install drivers. Install WHQL Drivers: Allow Silently. I don't know how to do this.

  Read the article

• Highly Available Web Application (LAMP)

  - by Anthony Rizzo

  I work for a small company who provides a web application for thousands of users. Earlier this year they had one server hosted one company. We recently acquired another server in a different location with the hopes of one day making this a redundant failover machine. I understand what to do with the mysql replication, I plan on using a master-master replication setup, and rsync to sync the scripts and files, however I am at a stand still about how to configure the fail-over. Ideally I would like the two machines to accept requests, like a round robin dns, however if one machine goes down I do not want requests to go that machine. All of the solutions I am come across assumes high availability of servers in the same location, these servers are in two completely different locations with different public ip address. Any help would be great. Thanks

  Read the article

• SQL Server Configuration Manager menu won't show up

  - by Aurelien Gasser

  I'm running a Windows 8 VM on a MacBook using Parallels Desktop 9. On this Windows VM, I have a SQL Server instance running perfectly. However, when I launch SQL Server Configuration Manager, and I want to enable an IP configuration, the Enable menu options are invisible : Here is a screenshot : http://i.imgur.com/PY7qGup.png (I don't have enough reputation to display the image inline) When I click the arrow, a contextual menu should appear with 2 choices "Yes" or "No". Instead, a tiny contextual menu appears, but it's empty. I tried using my keyboard tab/space/arrows keys without success. Has anyone faced/solved the same problem ?

  Read the article

• How to enable RDP to a Server 2008 R2 on another network? VM network

  - by Saariko

  I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

  Read the article

• How can I run 2 already installed OS at the same time?

  - by eran

  I have Win7 and Ubuntu installed on my PC, and I can choose which to run at boot time. I would like to be able to run the Ubuntu from within the Win7. Tools like VMWare allows one to create a new installation of a guest OS, which could then be run alongside the hosting OS. However, I already have the Ubuntu fully installed on my hard drive, and I'd like to maintain the dual boot option. Ideally, I'd like to be able to create a new virtual machine on my Win7, but instead of installing a new guest OS, just direct it to the existing installation. Is that possible?

  Read the article

• VMware 1.0.1 Windows7 - Ubuntu hostnames

  - by Kyle K

  I'm trying to run Ubuntu as the guest OS using VMWware 1.0.10 with Windows 7 Ultimate as the host OS. I had this set up previously with Win XP as the host OS and in fact I'm using the same .vmx My problem is I can't get either Win7 or Ubuntu to be able to ping the other by hostname. After installing Samba and Winbind on Ubuntu, I was able to get this working when under WinXP, but for some reason I can't get it to work under Win7. I can ping by IP Address, and the guest OS even shows up by hostname under the Windows networking panel (but of course I can't do anything with it), but pinging using short hostnames just won't work. Also, Win7 firewall is turned off completely.

  Read the article

• Want to SASL/TLS authentication

  - by Naval

  I want to send mail from remote client from my server(centos 5 and 64 bit) for this i need to sasl auth but i have no idea about it what changes i have to make in my server and client here I want to make things more clear my server's hostname/Ip is = test02.s80.in/176.67.172.209 now i want to authenticat remote client vps2.smail.info and vps1.smail.info to deliver mail .. so plz help me if any systematic way to do sasl/tls authentication for these clients... i am using DNS load-balancing(round-robin) mx record lookup technique for load balancing..

  Read the article

• how to create xampp mysql remote connection within my office ,

  - by Ranjit Kumar

  Before asking this question : i have gone through this link How do I allow remote access to mysql using xampp? But i couldnt make it up !!! i have installed xampp using xamppinstaller.exe and its version is 3.1.0. i am heidisql Gui for database managament i tried the same by changing the # bind-address from "127.0.0.1" to my system ip address as # bind-address to "192.168.1.69" After changing and restarting my xampp mysql i went to other system and tried to login (hedisql) with the hostname 192.168.1.69 and it gave me an error saying Error 1130(0000): host' ....' is not allowed to connect to this mysql server. what should i do please help me !!

  Read the article

• dns hierarchy not working !! Please help

  - by nikhilelite

  (DNS1 ,WWW1, Gateway1) (sub-internal network) (DNS0,WWW0,Gateway0) (internal network) DNS1: 192.168.250.3/24 WWW1: 192.168.250.4/24 Gateway1: 192.168.250.1 /24 (internal) :: 192.168.0.150 to 192.168.0.175 (external) DNS0:192.168.0.197/24 WWW0:192.168.0.197/24 Gateway0: 192.168.0.1 (internal) :: 69.94.x.x (external, dynamic ,isp control) Expected behavior: When using dig from internal (192.168.250.0/24) hosts, and query about domain from 192.168.0.197/16 nameserver's hosts (for which its authoritative) , it should return the ip address. Whats happening: After dig, answer section empty, the query is trying to access a.root server instead of 192.168.0.197 ,even though i have defined 192.168.0.197 as dns in gateway1's resolv.conf Why? I need this working asap, can anyone here help ?

  Read the article

• How can I run a game server on a computer behind a NAT, if I have another computer not behind a NAT?

  - by Macha

  My home connection is part of a large NAT, outside my control. Inside my home, my router has a NAT, under my control. I control a public facing Linux VPS with one IP address, outside my home network. Ideally, what I'd like to do is set something up so that I connect my home computer to my VPS, and after that port X on my VPS leads to port Y on my home computer, for the purposes of running a game server of a game that does not run under Linux. Is this possible?

  Read the article

< Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >