Search Results

Search found 20631 results on 826 pages for 'release management'.

Page 549/826 | < Previous Page | 545 546 547 548 549 550 551 552 553 554 555 556  | Next Page >

• Linux WD30EZRX WD Green HDD & Blacx Duet 5G Usb

  - by Adam

  I have connected up an WD30EZRX WD Green HDD to a Thermaltake Blacx Duet 5G USB dock in Ubuntu 12.04. Every thing seems fine except when the HDD idles it seems to have error ls: reading directory .: Input/output error after a while and is only fixed by unmounting and remounting the drive as root. I have the following line in /etc/fstab UUID=AAF670E9F670B6E3 /media/3TB ntfs defaults,user,auto 0 0 I have noticed that it seems to go between /dev/sdc2 and /dev/sdd2 devices on remount. I did copy 1TB last night without issue in 1 sitting. But after x mins of idle it has remount issue. Any tips/suggestions on how to proceed would be appreciated. Spent most of the night googling and all its done is made me sad. Edit (tried as suggested): root@mediaserver:/media/3TB# sudo hdparm -B 255 -S 253 /dev/sdd2 /dev/sdd2: setting Advanced Power Management level to disabled HDIO_DRIVE_CMD failed: Input/output error setting standby to 253 (vendor-specific) APM_level = not supported Seems as if that didn't help with this particular drive.

  Read the article

• Packet loss with all adapters on one PC only on the LAN

  - by Enigmativity

  I have a Windows 7 64-bit machine that is losing up to 20% of IP packets on both adapters - wireless & LAN. Browser traffic appears to be affected the most, but it is happening to all protocols. All other computers on the network are functioning fine. If I ping from my faulty machine to any machine on the LAN (wired or wirelessly), including the router/gateway and internet sites, I get up to 20% packet loss. If I do the following commands: ipconfig /release ipconfig /renew then I sometimes get my network performance back for a matter of a few seconds to less than a couple of minutes. Rebooting also works for a short period of time. This problem has been occurring for a couple of months and is getting worse. The computer used to work just fine. I updated the wireless adapter firmware the other day with no effect. Does anyone know what is happening?

  Read the article

• how to word wrap, align text like the output of man?

  - by cody

  what is the command that word wraps and justifies a text file so that the output looks like that of a man page: All of these system calls are used to wait for state changes in a child of the calling process, and obtain information about the child whose state has changed. A state change is considered to be: the child terminated; the child was stopped by a signal; or the child was resumed by a signal. In the case of a terminated child, performing a wait allows the system to release the resources associated with the child; if a wait is not performed, then the termi- nated child remains in a "zombie" state (see NOTES below). Thanks.

  Read the article

• Where are the Microsoft downloaded app compat updates stored?

  - by Ian Boyd

  Where are the Microsoft application compatibility update settings stored on a Windows XP, Windows Vista, and Windows 7 computer? Microsoft periodically release application compatibility updates (e.g. KB929427), where they list the shims that should be applied to a program in order to workaround known bugs in the software. Where are these app compat flags stored, and how can i see what shims are being applied? i have a feeling that a recent app compat update included a flag to force a particular piece of software, that we use, to require administrator. Because the task is scheduled to run nightly, and the running user does not have administrative privelages, the task is failing to start. The application is requiring to be elevated. It has the UAC shield overlay. The application has no RT_MANIFEST resource, and the compatibility option Run this program as administrator is disabled (per-user and all users). So all that's left is some secret global setting. i know user-specified compat flags are stored in: HKEY_LOCAL_MACHINE \SOFTWARE \Microsoft \Windows NT \CurrentVersion \AppCompatFlags \Layers

  Read the article

• IIS/SMTP - unable to move emails from inetpub/mailroot/Queue due to file lock

  - by Bryan Roth

  I have a listener that processes emails in the inetpub/mailroot/Queue directory. Once the listener is done processing an email it proceeds to move the email to another directory. However, moving the email is not possible due to a file lock by the process inetinfo.exe. I have noticed that this file lock is released after a period time that ranges from several hours to several days. You can see that the Queue directory can get pretty full over time. The only way I have been able to work around this is by manually stopping and starting my SMTP virtual server in IIS. Is it possible to release this file lock programmatically? If not, is it possible to expedite releasing this file lock?

  Read the article

• Exchange 2007 - How to use export-mailbox function?

  - by Khalid Rahaman

  I am trying to use the Export-Mailbox cmdlet to export a mailbox to PST file but i get an error that i'm running on a 64bit machine and must use a 32 bit etc etc.. I have a Windows 7 Pro 32bit PC joined to the domain with the exchange server, and outlook 32bit installed. When i try to install Exchange 2007 32bit management console only, i'm told that i can't install the managemnet tools on a Windows 7 PC. Can someone please advise if this is correct setup to be able to run the export-mailbox function to dump the mailboxes into PST files. Thank you

  Read the article

• Checkout repo from SVN but use local files to populate

  - by aidan

  I have an SVN server on our development server, and I release to our production server using rsync. It not ideal, but it's worked so far. Anyway, I've finally got the SVN client installed on the production server and I want to start using that to copy files from development to production. My problem is this, I don't want to check all the data out of development when I already have it on the production server. Is there a way to "checkout" a repository, but use the files that are already on the production server (and force it to assume they are the head versions for example)? Thanks.

  Read the article

• Change popup format for Kopete in Gnome (Ubuntu 10.04)

  - by HorusKol

  After trialling Empathy which was included with Gnome/Ubuntu 10.04 I decided to go back to Kopete since I was losing chat messages. However, for some reason, Kopete is now displaying all popups in a big, ugly window with four options (ok, cancel, view, ignore, or something like that) that actually all seem to do nothing. I tried looking for options in Kopete to change the popup style to the nicer Gnome style one which goes up in the top-right of my desktop, but it doesn't seem to be possible with this release. So I had to resort to removing all popup messages from Kopete to prevent my screen being taking over by a popup requiring action for every incoming chat message. Unfortunately, this now means that I do not get any notifications when people message me - and so I can go a couple of hours without realising that they did. Anyone know how to get the nice, unobtrusive popups working in this version?

  Read the article

• Running Sonatype Nexus in Tomcat 7.0, Tomcat blocking PUT requests

  - by gdm

  I was previously running Nexus 1.8 on OSX and uploading jars for releases without any issues. The OSX box died, so I moved to a FreeBSD server. Since Nexus doesn't have binaries for FreeBSD, I decided to run it in my Tomcat container. Now, I have set up Nexus 1.9 in Tomcat 7.0 on FreeBSD. Everything is working well, except I can't upload jars to my release or snapshot repositories. If I try via Hudson, I get a 401 error (and no further details). If I try manually via curl, I get an error message back from Tomcat: "This request requires HTTP authentication.". Why is Tomcat giving this error, and how do I stop it? If I look in the Nexus logs I can see that the PUT request doesn't even reach Nexus, Tomcat is intercepting it.

  Read the article

• How to configure remote access to multiple subnets behind a SonicWALL NSA 2400

  - by Kyle Noland

  I have a client that uses a SonicWALL NSA 2400 as their firewall. I need to setup a second LAN subnet for a handful of PC. Management has decided that there should be a second subnet even though intend to allow access across the two subnets - I know... I'm having trouble getting communication across the 2 subnets. I can ping each gateway, but I cannot ping or seem to route traffic fron subnet A to subnet B. Here is my current setup: X0 Interface: LAN zone with IP addres 192.168.1.1 X1 Interface: WAN zone with WAN IP address X2 Interface: LAN zone with IP address 192.168.75.1 I have configured ARP and routes for the secondar subnet (X2) according to this SonicWALL KB article: http://www.sonicwall.com/downloads/supporting_multiple_firewalled_subnets_on_sonicos_enhanced.pdf using "Example 1". At this point I don't minding if I have to throw the SonicWALL GVC software VPN client into the mix to make it work. It feel like I have an Access Rule issue, but for testing I made LAN LAN, WAN LAN and VPN LAN rules wide open with the same results.

  Read the article

• Which CMS for a mobile app? No HTML, just XML or JSON.

  - by Sascha

  I am a newbie in content management systems. I would need a CMS that can transfer content by XML or JSON to a client. It is ok if the CMS can also manage HTML websites, but the priority is on the data transfer over a web service. Which is the best CMS to use here? I want to avoid spending endless hours learning all the big CMS systems just to find out that they don't support this feature or that it's badly integrated. Thanks.

  Read the article

• SQL2008 Won't Work After SP1 Install?

  - by leen3o

  I have SQL2008 installed on my Win2008 server, and its been working fine - I have sites running using SQL databases etc.. I thought I would install SQL2008 SP1, but after install I cannot connect to SQL via Management Studio, and in configuration manager I cannot start SQL? TITLE: Connect to Server Cannot connect to #MYINSTANCENAME#. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 BUTTONS: OK I'm not really a techie so a bit stuck?? any ideas??

  Read the article

• How to get partition information from non-booting server?

  - by gravyface

  Need to manually rebuild a mirrored array on a server and am in the process of reinstalling SBS 2003 on it. However, it's a Dell server, and know that there's the Dell FAT32 diagnostics partition, a system partition, and a data partition, but do not know the size of each. Planning on reinstalling SBS 2003, all applications on the server, and then doing a System State restore, but figured that not having the correct partitions will cause some grief: am I right? Almost thinking that the size of the partitions shouldn't matter, but not positive. Question: should I care about the size of the partition? If so, how can I get this partition information from a non-booting drive? We have an Acronis image of the one working disk and the partitions are mounted/viewable in Explorer on a workstation, but I'm not sure where the Logical Disk Manager/Disk Management data is stored and/or if there's a way to retrieve it without having a working Windows installation.

  Read the article

• Benchmarks relevant for a Visual Studio .Net development workstation

  - by user30715

  I am developing a system with Windows 7-64, Visual Studio and Sharepoint on a virtual workstation on some kind of VMWare server. The system is painfully slow, with VS lagging behind when entering code, Intellisense lagging, opening and saving files takes ages when compared to a normal budget laptop. As far as I can see the virtual machine has OK specs and does not seem to be swapping etc., and the IT dept also says that they can't see anything wrong when they're monitoring the system. As long as the problem is not well-documented, the IT dept and management does not want to throw money (=upgraded laptops) at us, so I need to show some sort of benchmark. It has been many years since I did any system benchmarking, and I don't know the current benchmark software, so my question is which benchmark will be most relevant for Visual Studio performance? Not just for compiling fast, but also to reflect the "responsiveness" of the system. Cheers, user30715

  Read the article

• ASP.NET, PostgreSQL, Mono, Ubuntu, Apache: Good idea?

  - by wreck_of_u

  I am a long-time Microsoft .NET developer. ASP.NET/MSSQL/IIS has been my bread & butter over the past 6 years. Now, I'm getting fond of the "lightweightness" of Ubuntu 10.xx server. I'm also loving SSH-ing it from my Windows 7 PC and installing apps using the awesome "apt-get" command. I've also been using HeidiSQL with MySQL now and loving it. It feels like Management Studio. However, i've read that PostgreSQL "may" be better than MySQL, and I did experience some MySQL overloads in my Moodle box (but this can be just a poor tweaking in my part). My question is, would it be a good idea to run this configuration? ASP.NET 4.0 PostgreSQL (the latest one I can apt-get!) Ubuntu 10.10 with Mono running on Apache Also, I assume I would be using Npgsql for Mono as my connector from ASP.NET to PostgreSQL?

  Read the article

• Should I upgrade my LinkSys WRT54GL firmware?

  - by Reid

  I have a LinkSys WRT54GL v1.1 which currently has stock firmware version 4.30.7. I see that version 4.30.14 is available. The router works fine now, and the release notes look uninteresting except for one line in v4.30.9: "Resolves issue with Linux kernel vulnerability". I have remote management turned off. I'm aware of the 3rd-party firmwares but the stock firmware works fine for me at the moment, so I don't have an interest in those. Is the status quo fine or should I upgrade the firmware? (It's a bit of a pain since the config has to be saved and reloaded, and obviously any mucking with firmware is risky.)

  Read the article

• Hyperic HQ says the server is down, but it is not!

  - by Diego Jancic

  Hi, I've been using HQ for a couple months now, and everything worked fine. But since yesterday all resources go down for a couple hours, and then everything restores to normal, and then go down again without doing anything. The server of course is working, the HQ server and agent are both working, and the IPs were not modified. I've tried to re-run the setup in the HQ agent, and it did not change anything. Agent is in Windows 2008, and Server is in Windows 2003. I'm using HQ Version 4.1.2 (build #1053 - May 06, 2009 - Release Build) Any hint? Thanks! Update: I guess (although I'm not sure) it stopped working when the disk on the server went full, with 0 bytes of free space. Of course I've freed more than 15gbs and restarted the HQ server/database.

  Read the article

• Upgrading drives on a MD3000

  - by Anonymouse

  Hello, Our MD3000 array is getting full as our databases are growing and we need more spaces. Currently, we use a MD3000 with a two-servers Windows 2003 cluster and 15x 73GB SAS drives. Disk groups are configured in RAID1 of two drives. The approach we are currently investigating is simply swapping the existing SAS drives with bigger ones (300GB instead of 73GB), one at a time, and let each RAID1 array rebuilt. Is it a good approach? Will we be able to resize the array afterwards? Will we be able to resize the partitions afterwards? Can the Dell M3000 Management software do it or will we have to bring the server offline and use some partition software to do it? Thanks in advance.

  Read the article

• Swapping 3Ware Raid Card - Best Procedure

  - by Brian Lee Jackson

  We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

  Read the article

• How can I find a laptop if it has a different model name all over the world?

  - by Mike

  CONUNDRUM: A laptop review in the UK talks about how brilliant the "ASUS ABCDE 55" is, but in America, France, etc there is no such laptop name. In fact it's called "ASUS 12345 AB" - AAARRGH! QUESTION: Is there a way of finding out all the diverse names for the same laptop all over the world? Example: if Samsung create a R2D2500, then what is that spec laptop called in all the other countries (if they release it of course). Or if it's not released, what is their similar spec laptop called in the other countries? I understand that specs may be different, but if I read a review on my trusted UK website, but live in say Australia, I want to be able to find the name of the same laptop in Australia and then check out local places to buy it. So if anyone knows if there is a technique, specific website, or even how to use a company website to find out these annoying name changes I'd really appreciate it.

  Read the article

• Changing SPF (Sender Policy Framework) record for Google Apps

  - by bobo

  My boss asked me to set up Google Apps for a client and basically I have done everything including setting up MX records in DirectAdmin and re-creating the email accounts in Google Apps. I also sent a few test emails to ensure that it actually works and it seems fine. But then I discovered this article talking about changing the SPF record for the domain. http://www.google.com/support/a/bin/answer.py?answer=178723 After reading the introduction I think it would be better for me to change the SPF record according to this article. So I logged in to the DirectAdmin and navigated to the DNS management, and then I found that there's already a TXT SPF record there: v=spf1 a mx a:spf.cabin.com.hk include:gmail.com -all And it looks like it's already including gmail.com, but according to the article it should be: _spf.google.com rather than: gmail.com I dare not to change it before I understand what this record actually means. What would you do with this record if you were me?

  Read the article

• Cannot get Backup Exec to backup Exchange.

  - by Shawn Gradwell

  I have a media server, Windows Server 2008 SP2 running Backup Exec 2010 R2. The SQL and other Windows agents work but I cannot backup the Exchange 2010 server running Windows Server2008 R2. I have the correct license for the Exchange agent - installed on the media server, and I installed Exchange Management tools on the media server. The 'Microsoft Exchange Database Availability Group' option is greyed out and if I select the server under a new backup job I can expand the 'Microsoft Information Store' option and see the mail database name but showing 0Kb. When I try to back it up it gives an error displaying: The job failed with the following error: Backup Exec attempted to back up an Exchange database according to the job settings. The database was not found, however. Update the selection list and run the job again.

  Read the article

• Error while setting up Anywhere Access on Windows Server 2012 Essential (personalized domain name from Microsoft)

  - by Thomas

  I am trying to setup Anywhere Access on a Windows Server 2012 Essential Release Candidate, but keep getting this error: "The domain name was not setup for your server. Wait a few minutes and run the wizard again. An unknown error occurred. Please wait a few minutes and then try again". These are the options that I selected in the Wizard: I want to set up a new domain name Get a personalized domain name from Microsoft Entered my Windows live id and password xxxx.remotewebaccess.com And on the next page the error is displayed. I have setup my router (Linksys WRT160N) to forward all TCP traffic to the Server. UPnP is also enabled. If I hit my public (dynamic) IP (http://188.182.194.182/) I get the Windows Server 2012 homepage. Any ideas?

  Read the article

• VMWare Host needing ESXi 5.0 - Running on a 2008 R2 Host?

  - by Great Big Al

  I have a VMWare image supplied by my Phone System provider which manages a contact management interface, they tell me that VMWare EsXi5.0 is the highest supported host. I'm used to MS HyperV and have no VMWare experiance. At present I have this guest running on a simple desktop PC running ESXi5.0.0, I'd idealy like to run this guest (it's Windows 7 with their software already installed and configured) on a Windows 2008R2 server I have available, as I said, I'm used to HyperV and I can't easily identify if there is a version of VMWare that supports ESXi5.0 guests that will run on a Windows 2008 R2 server host. Is there such a product, what's it called, and with one guest can I run it without purchasing a license? Thanks

  Read the article

• Using symbolic links with git

  - by Alfredo Palhares

  I used to have my system configuration files all in one directory for better management but now i need to use some version control on it. But the problem is that git doesn't understand symbolic links that point to outside of the repository, and i can't invert the role ( having the real files on the repository and the symbolic links on their proper path ) since some files are read before the kernel loads. I think that I can use unison to sync the files in the repo and and the their paths, but it's just not practical. And hard links will probably be broken. Any idea ?

  Read the article

< Previous Page | 545 546 547 548 549 550 551 552 553 554 555 556  | Next Page >