Search Results

Search found 2154 results on 87 pages for 'bios'.

Page 55/87 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Screenshot before windows starts: without another computer?

  - by Nano8Blazex

  I'm pretty sure that this must have been asked before, but haven't found a duplicate question, thus I shall ask again... Is it possible to take a screenshot of my computer before the OS boots up WITHOUT an external computer or virtualization software like VMWare?? e.g. at the BIOS, or the "Windows is Loading" screen, even at the login screen? Is it possible to take screenshots of BSODs as well? EDIT: I'm using a desktop pc running Windows 7 Ultimate in a home environment. Thanks.

  Read the article

• insert system disk error after switchting SATA cables

  - by Matthias

  I have 5 hard disks built in my computer, two connected by IDE cables, three by SATA. Today I had to return two of the SATA cables to my room mate. So I grabbed another one I had floating around and connected the remaining disk by unplugging my DVD R/W. Now I receive the 'insert system disk and press enter' error after booting. Disks and cables seem to be fine, since all the disks are recognized in the BIOS. Also, I can mount the disks using a live CD w/o problems. I also tried different orderings of the cables (i.e. plugging the disks in different plugs on the mainboard), I'm not sure if that even matters using SATA. Any Ideas what might be the problem here? The OS installed are Windows 7 and Ubuntu 10, the bootloader installed is GRUB. PS: No RAID involved, JBOD.

  Read the article

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Boot linux off hard drive and then switch to run from usb flash disk

  - by Jesse

  I have an older laptop that I want to use as a simple media server on my home network. I would like to avoid using the internal hard drive except for booting (BIOS does NOT support booting from USB). My thought was to mirror the hard drive (currently has current install of Arch Linux) onto the flash drive and then after booting switch over to run everything from the flash drive. I read the following article about using a RAM disk (HOW-TO: Boot OS into RAM for speed and silence) but ran into problem because the USB subsystem does not seem to be initialized soon enough (I create root and home paritions on the flash disk and modified fstab to pick those - didn't work). Any thoughts?

  Read the article

• Erase all traces of Windows 8

  - by user1032531

  Just bought a new HP pavilion desktop with Windows 8. I wish to totally remove Windows 8 and all data on the hard drive, remove any windows partitions, delete all data, and then install a fresh Linux. Problem is I can seem to get to boot from USB or boot from CD. It appears that Windows 8 added the following two "features": UEFI which substitutes what we have known as the BIOS Secure Boot which prevents anything but the installed operating system How do I completely and totally erase all traces of Windows 8? Is it still possible to reformat the hard drive? I don't want a duel boot, I don't want to go back to Windows 7, I just want anything Windows gone.

  Read the article

• Need help solving "Disk Error Press any key to restart" after blue screen in XP.

  - by Dennis

  I have had a couple of BSOD's lately and after the last one I got the disk error message. The disk shows up during the BIOS portion of the boot. It is in a Dell Precision 690 so the F12 key gives me a boot menu. I can boot from the utility partition, and if I specifically select the hard drive from the boot menu it will boot fine. Any ideas why if I just try to do an unattended boot, it give the error listed in the title?

  Read the article

• Stop RAID 5 from Initializing

  - by Antz

  Hi, I am trying to follow Ictinike's guide on Recovering Intel RAID "Non-Member Disk" Error found here, Ictinike's RAID recovery Guide I have recreated my RAID array as per the instructions. However my RAID array status is then automatically set to: INITIALIZE When I boot back into my Windows XP desktop, the Intel Matrix Storage Utility begins to "Initialize" my drives. This is a long slow process that will take about 20 hours. I suspect all my data will be lost. I have gone back into my bios and disabled my RAID controller to prevent any further initialization and data loss. I have read that initialization will cause data loss. I've also read somewhere that it won't. I am not so confident in the latter. Is there anyway to stop this initialization process so I can continue to follow the steps in the recovery guide? Some system specs: ABIT IP35 Pro Motherboard ICH9R on board RAID controller

  Read the article

• Gateway MX6440 CPU Upgrade

  - by BPugh

  I have received an a Gateway MX6440 laptop as a freebie, but I'm interested in upgrading its AMD Turion 64 ML-32 (socket 754) to something faster (and more cache). I know the range of processors that could work based on the family list in Wikipedia. However, this computer has the stock bios, and any updates I haven't applied from Gateway doesn't specify processor support. I'm looking to go to at least a 2.2 (ML-40). Has anybody upgraded the processor in this model or other in the series success or failure and do you happen to have any guides handy for working with the heat sink? Any Googling I have done keeps hitting RAM marketers. Update Computer died before I had a chance to try this out.

  Read the article

• PGP Desktop Whole disk Encryption paused on a toshiba ultrabook z935

  - by garg

  I have a Toshiba z930 Ultrabook with PGP Desktop installed for whole disk encryption. It installed correctly, and started encrypting but it stays paused. If I reboot, it shows me the PGP desktop username, password, domain screen. If I enter in my credentials, it allows me to get into windows but encryption remains paused. If I click on resume, it lets me enter a password, accepts it but then it doesn't do anything. One suspicious thing is that in the 'Select disk or partition to encrypt' box, it says, C: 120B fixed disk. Unknown Bus: TOSHIBA THNSNS12... Do I need to change something in the BIOS, or install any drivers so that it doesn't see it as an Unknown Bus?

  Read the article

• Why is my HDD not showing up?

  - by Mike

  I'm on Windows 7, got a new 2 TiB NON-external hard disk. When I plug it in it doesn't show up on the Disk Management list in the Computer Management window (that you get by right-clicking My Computer and selecting "Manage"). At first I thought it was broken, but I could see it using a friend's computer. I've run a full disk scan using the official tool from Western Digital, no problems. I've formatted it and partitioned it at another friends place, I've even encrypted the disk fully without any problems, then mounted it and placed a text file on it with the word "hello" inside and saved the file. When I boot my own computer the disk shows up in BIOS. So the disk is not broken. I've tried changing what SATA slot on the motherboard I stick it in. Makes no difference. After all this: Why won't my Windows 7 discover the disk???

  Read the article

• IBM X3200 M2 upgrade and VT-x / usb passthrough for esxi

  - by enzo

  Hi, I have an IBM server x3200 m2 4368-k1g. Only to understand, simply because on IBM support does not exist no more upgrades kit on sale... if I buy a xeon processor, for example x3330 (4core @ 2.6ghz), and put it on my motherboard... 1) it works? 2) on the bios (where now there is no trace about...) will compare a VT-x menu to select and enable? 3) with esxi, once the VT-x is on... I'll be able to have usb passthrough ? Thank you in advance for your reply

  Read the article

• How to disable power to USB ports when laptop is in sleep mode

  - by Greg

  I have a Windows7 laptop with two external 2.5" HDDs and a cooling pad connected through USB ports. When I put the laptop to sleep, these devices are still powered on - the fan in the cooling pad is still spinning, the drives are still spinning. I want to set it all up so that they power down when in sleep. I tried setting the Allow the computer to turn off this device to save power option in the USB Root Hubs' Properties in Device Manager and enabling USB selective suspend in power options - it didn't work. As it's a laptop, BIOS options are extremely locked down, so I can't even see anything relevant to sleep in there. Is it even possible to do this?

  Read the article

• What could be causing Windows to randomly reset the system time to a random time?

  - by Jonathan Dumaine

  My Windows 7 machine infuriates me. It cannot hold a date. At one point it all worked fine, but now it will decide that it needs to change the system time to a random time and date, either in the future or past. There seems to be no correlation or set interval of when it happens. In attempt to remedy this, I have: Correctly set the time in BIOS. Replaced the motherboard battery with a new CR2032 (even checked it with a multimeter). Tried disabling automatic internet synchronizing via "Date and Time" dialog. Stopped, restarted, left disabled the Windows Time service. Yet with all of these actions, the time will continue to change. Any ideas?

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• SLI Artifact issues

  - by sloughk

  When I enable SLI I keep getting artifacts in random games and in Windows Aero sometimes . It doesn't seem to be about over-heating as it happens randomly, and sometimes whole computers just crashes (not blue-screen, just black gone...) My setup: Geforce 8800 GTS 320MB ( http://www.bfgtech.com/bfgr88512gtoce.aspx ) x 2 GIGABYTE EX58-UD4 Windows 7 RC PSU 800W I've got the latest NVIDIA drivers and F5 BIOS update (*SLI update*). When I disable SLI and use the cards separately they are working just fine even in games. Any idea why this might happen?

  Read the article

• How can I set the fan speed to 100% on a laptop?

  - by Codemonkey

  I recently purchased a HP Pavilion dv7-4031. When it's cool, it works smoothly and efficiently. However when CPU and GUP temperatures reach 60c and above, the PC starts freezing up and stuttering. I can hear that the fan speeds steadily increase all the way up to 70-80c. This is what pisses me off: I want the fan speeds to run 100% all the time, perhaps preventing the high temperatures in the first place. The way it is now, fan speeds only increase to keep internal temperatures at above 60c. I've searched all over for any sort of speed control, finding nothing. Any help appreciated. I have tried Speedfan. In "Fans" there is nothing listed. I took that as a bad sign. The BIOS is pathetic, and only has 4 or 5 changeable settings, including "Quickstart" and "Boot order"

  Read the article

• RAID-0 problem with a Sony sporting a new HDD

  - by redrock

  Sony Windows 7 PC. Originally had 2 x 300 Gb HDD. One HDD completely pancaked so have replaced with a new 500 Gb HDD. When both drives are connected the 300GB doesn't appear to be recognized as a 300Gb HDD as a separate entity. BIOS sees it but the operating system only sees a total of 465GB of HD space. When both disks are attached under disk management it shows one 465Gb as RAID 0 and the new drive as STxxxxxx 465Gb. My question I guess is what should I see in total HDD space and is this configured correctly as I thought I would see 2 separate drives 1x500Gb and 1x300Gb. My customer insisted that prior to the HDD crash he saw 2 drives both registering as 300Gb (a c: and d: drive).

  Read the article

• ASUS EAH4670 vs. ASUS EAH4670 V2 -- Whats the difference?

  - by roosteronacid

  I've been offered to buy a used ASUS EAH4670/DI/1GD3 graphics card. I went price-scouting to see if the offer I was given was fair, and I found out that there's a similar card, labelled ASUS EAH4670/DI/1GD3 V2. Question is; What's the difference? What's with the V2? What does it mean? Is it just a BIOS upgrade that I can do myself? Updated driver-software which I can download myself? Or is the card actually a better version--faster, more reliable (physical changes to the print), etc.?

  Read the article

• Latitude E6410 - Screen flickering on Windows 8

  - by Martin

  On Windows 8, my Latitude E6410 screen (1440x900 - 60Hz - NVidia NVS3100M) is flickering. If I turn off the laptop for 30 minutes and turn it back on, there's no flickering but it eventually start again after 10-15 minutes. The flickering seems more present at the top and bottom of the screen. I already updated the graphic card drivers, bios, etc. Nothing seems to fix the issue. To prove that it isn't a hardware issue, when I reinstalled Windows 7 I couldn't reproduce the issue. Any idea what could cause this?

  Read the article

• PS/2 and USB Keyboard is not working !!

  - by Mr-Right

  hello, let me make is clear that it is a different question from other related questions already posted here. Here is the scenario,No OS is installed in Computer. I am trying to install windows xp professional but due to keyboard failure I can't make it. PS/2 keyboard is not working at all. USB keyboard is working only before POST,I can work in BIOS. As soon as it starts booting from CD disc,keyboard fails to respond. And I can't go ahead from this message Press any key to boot from CD......

  Read the article

• Das keyboard boot camp

  - by chuck taylor

  So I recently started using a Das keyboard ultimate with my mac and after installing the key re-mapping, it basically works ok. I have a couple of issues with the set up involving boot camp. When I start up the computer, which key maps to option in order to let me pick which operating system to boot into? I think the bios is detecting the keys along the bottom as alt or something like that and I am not sure what to do here. In windows 7, the " and @ keys are switched. How do I get windows to remap this back to the US english settings? Thanks for any help you can provide.

  Read the article

• Lockup when unlocking screen saver

  - by chris

  I've had this happen a couple of times - screen saver kicks in, locks the screen, and when I put my password in to unlock it the system just seems to hang. Cursor turns to the busy, HDD light flickers occasionally, but the only thing I can do at that point is power down. This is on a desktop, not a laptop and according to the bios all the power saving is turned off. Has anyone else seen this? Is there a way to prevent it, or at least diagnose the cause?

  Read the article

• Which software raid modes does each version of Windows 7 support?

  - by Goyuix

  Being familiar with the software raid modes and dynamic disks from the server versions, I was wondering if there is a document or even just common crowd knowledge that indicated what software raid support was available for each version of Windows 7. Also - all the various raid levels supported for booting or just a data recovery mechanism (e.g. you can connect three RAID-5 dynamic disks to an already booted system). I would prefer to stay away from modified/copied DLL's from the server variants, as well - please note - this is Windows software RAID - not fake-raid from your BIOS or an add-on card.

  Read the article

• Did Acronis True Image Home 2012 clone operation "lock" my BitLocker disk?

  - by Thomas Eyde

  After trying to clone my primary drive, which requires a reboot to proceed, BitLocker detected that the boot sector had changed and required the recovery keys. Not a good situation to be in on Sunday evening when it is your IT-department who hold the keys. After talking with the guys at IT, I have tree suspects on why BitLocker locked me out: The newly added, second hard drive in my machine. The changed boot-order in BIOS. The changes True Image did in order to do its things on boot. As an end-user, I should never have to end up in situations like these without any warning. I would like to know what really happened, so I can inform Acronis on how they can improve their product to avoid this situation in the future.

  Read the article

• Are there pitfalls to using incompatible RAM (frequencies) in motherboards?

  - by osij2is

  I'd like to use 2 x 4GB DDR3 1600 dimms in a motherboard capable of only DDR3 1066. The DDR3 1600 is on sale and the cost is identical to 1066 dimms. It'd be nice to have these faster sticks around should i upgrade the motherboard. I assume the RAM can under clock itself or be changed in the BIOS. While obviously it's less than ideal situation, I don't know if there are other unintended consequences in terms of stability, performance and longevity of the board and said RAM. Am I doing any damage to the memory controller or RAM? I've always bought RAM at the max speed specified for the motherboard and I've never gone over so I'm not sure if there any caveats to this at all. Edit: I intend to use the RAM in pairs. I know that mixing RAM speeds is just a bad idea.

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >