Search Results

Search found 5756 results on 231 pages for 'drop'.

Page 55/231 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • Windows 7 does not recognise second display output

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • Security log overflowing with filtering blocks

    - by Jacob
    I have a Windows 7 workstation whose security log is overflowing with the following errors: Audit Failure 3/31/2010 2:00:50 PM Microsoft-Windows-Security-Auditing 5157 Filtering Platform Connection "The Windows Filtering Platform has blocked a connection." Audit Failure 3/31/2010 2:00:50 PM Microsoft-Windows-Security-Auditing 5152 Filtering Platform Packet Drop "The Windows Filtering Platform has blocked a packet." These are not unexpected events; the firewall is expected to drop unsolicited traffic. However, I can't figure out how to tell Windows to stop writing these events to the security log. I've seen this problem before and have been able to find an answer with the use of Google, but I wasn't able to locate on this this time. Thanks!

    Read the article

  • Linux Transparent Bridge for Network

    - by Blackninja543
    I am attempting to set up a semi-transparent bridge. I say semi because I want it to act as a transparent tap for all traffic moving through both sides of the bridge. What I also want is to have the "green zone" accessible to a web interface for the bridge that will display all results of the IDS and other network monitoring tools. My example would be as such: eth0 <--> bridge(br0) <--> eth1 The entire network would be on the same subset however anything coming from eth0 to eth1 would be accepted. The only time anything would be drop is if the eth0 attempted to access br0. If someone attempts to access the web interface on br0 through eth1 it will succeed. My biggest problem I feel is if I attempt to block anything from eth0 to br0 this will drop the bridge all together.

    Read the article

  • Block IP Address including ICMP using UFW

    - by dr jimbob
    I prefer ufw to iptables for configuring my software firewall. After reading about this vulnerability also on askubuntu, I decided to block the fixed IP of the control server: 212.7.208.65. I don't think I'm vulnerable to this particular worm (and understand the IP could easily change), but wanted to answer this particular comment about how you would configure a firewall to block it. I planned on using: # sudo ufw deny to 212.7.208.65 # sudo ufw deny from 212.7.208.65 However as a test that the rules were working, I tried pinging after I setup the rules and saw that my default ufw settings let ICMP through even from an IP address set to REJECT or DENY. # ping 212.7.208.65 PING 212.7.208.65 (212.7.208.65) 56(84) bytes of data. 64 bytes from 212.7.208.65: icmp_seq=1 ttl=52 time=79.6 ms ^C --- 212.7.208.65 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 79.630/79.630/79.630/0.000 ms Now, I'm worried that my ICMP settings are too generous (conceivably this or a future worm could setup an ICMP tunnel to bypass my firewall rules). I believe this is the relevant part of my iptables rules is given below (and even though grep doesn't show it; the rules are associated with the chains shown): # sudo iptables -L -n | grep -E '(INPUT|user-input|before-input|icmp |212.7.208.65)' Chain INPUT (policy DROP) ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) DROP all -- 0.0.0.0/0 212.7.208.65 DROP all -- 212.7.208.65 0.0.0.0/0 How should I go about making it so ufw blocks ICMP when I specifically attempt to block an IP address? My /etc/ufw/before.rules has in part: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ACCEPT -A ufw-before-input -p icmp --icmp-type source-quench -j ACCEPT -A ufw-before-input -p icmp --icmp-type time-exceeded -j ACCEPT -A ufw-before-input -p icmp --icmp-type parameter-problem -j ACCEPT -A ufw-before-input -p icmp --icmp-type echo-request -j ACCEPT I'm tried changing ACCEPT above to ufw-user-input: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ufw-user-input -A ufw-before-input -p icmp --icmp-type source-quench -j ufw-user-input -A ufw-before-input -p icmp --icmp-type time-exceeded -j ufw-user-input -A ufw-before-input -p icmp --icmp-type parameter-problem -j ufw-user-input -A ufw-before-input -p icmp --icmp-type echo-request -j ufw-user-input But ufw wouldn't restart after that. I'm not sure why (still troubleshooting) and also not sure if this is sensible? Will there be any negative effects (besides forcing the software firewall to force ICMP through a few more rules)?

    Read the article

  • Windows 7 does not recognise second display output [closed]

    - by gilles27
    I've got a PC with dual BenQ G2222HDL monitors and an ATI Radeon HD 4650 video card. I've been running both monitors at 1920x1080 for some months now but last week the second monitor switched to a lower resolution and won't let me go back to 1920x1080. If I right click the Desktop and choose Screen Resolution from the menu, I get two items in the Display: drop down list BenQ G2222HDL D-SUB Display device on: VGA In the past 2 was always the same as 1. If I click Detect a third item appears Available display output on: ATI Radeon HD 4650 but if I use the Multiple displays: drop down list to use it says "No display detected" and then lets me choose from either "Connect anyway on S-Video" or "Connect anyway on Component", neither of which help. It seems like Windows 7 recognises the card is dual-head, and knows I have got two monitors, but can't link it all together. I have checked and all my drivers are up-to-date. Does anyone have any suggestions as to how I can get the second monitor working properly again?

    Read the article

  • MikroTik ipv6 Tunnel

    - by MikeSmitty
    I've got a MikroTik router set up with the latest stable OS on it, and I just set up an ipv6 tunnel with Hurricane Electric, but I'm having an odd issue with it. I can't ping anything until I first ping the tunnel endpoint on HE's side. After that I can ping any ipv6 address fine, but give it a little time (say, maybe 30 sec) and I can't ping any ipv6 addresses again. Whenever it stops allowing ping to go through I notice the counter on my firewall rule that drops invalid connections goes up. this is my ipv6 firewall config: add action=accept chain=input comment="" connection-state=established \ disabled=no in-interface=sit1 add action=accept chain=input comment="" connection-state=related disabled=no \ in-interface=sit1 add action=accept chain=input comment="" disabled=no in-interface=bridge \ src-address=ipv6_address_here/64 add action=drop chain=input comment="" connection-state=invalid disabled=no \ in-interface=sit1 add action=drop chain=input comment="" disabled=no in-interface=sit1 Any ideas on what it could be?

    Read the article

  • Access 2007 VBA & SQL - Update a Subform pointed at a dynamically created query

    - by Lucretius
    Abstract: I'm using VB to recreate a query each time a user selects one of 3 options from a drop down menu, which appends the WHERE clause If they've selected anything from the combo boxes. I then am attempting to get the information displayed on the form to refresh thereby filtering what is displayed in the table based on user input. 1) Dynamically created query using VB. Private Sub BuildQuery() ' This sub routine will redefine the subQryAllJobsQuery based on input from ' the user on the Management tab. Dim strQryName As String Dim strSql As String ' Main SQL SELECT statement Dim strWhere As String ' Optional WHERE clause Dim qryDef As DAO.QueryDef Dim dbs As DAO.Database strQryName = "qryAllOpenJobs" strSql = "SELECT * FROM tblOpenJobs" Set dbs = CurrentDb ' In case the query already exists we should deleted it ' so that we can rebuild it. The ObjectExists() function ' calls a public function in GlobalVariables module. If ObjectExists("Query", strQryName) Then DoCmd.DeleteObject acQuery, strQryName End If ' Check to see if anything was selected from the Shift ' Drop down menu. If so, begin the where clause. If Not IsNull(Me.cboShift.Value) Then strWhere = "WHERE tblOpenJobs.[Shift] = '" & Me.cboShift.Value & "'" End If ' Check to see if anything was selected from the Department ' drop down menu. If so, append or begin the where clause. If Not IsNull(Me.cboDepartment.Value) Then If IsNull(strWhere) Then strWhere = strWhere & " AND tblOpenJobs.[Department] = '" & Me.cboDepartment.Value & "'" Else strWhere = "WHERE tblOpenJobs.[Department] = '" & Me.cboDepartment.Value & "'" End If End If ' Check to see if anything was selected from the Date ' field. If so, append or begin the Where clause. If Not IsNull(Me.txtDate.Value) Then If Not IsNull(strWhere) Then strWhere = strWhere & " AND tblOpenJobs.[Date] = '" & Me.txtDate.Value & "'" Else strWhere = "WHERE tblOpenJobs.[Date] = '" & Me.txtDate.Value & "'" End If End If ' Concatenate the Select and the Where clause together ' unless all three parameters are null, in which case return ' just the plain select statement. If IsNull(Me.cboShift.Value) And IsNull(Me.cboDepartment.Value) And IsNull(Me.txtDate.Value) Then Set qryDef = dbs.CreateQueryDef(strQryName, strSql) Else strSql = strSql & " " & strWhere Set qryDef = dbs.CreateQueryDef(strQryName, strSql) End If End Sub 2) Main Form where the user selects items from combo boxes. picture of the main form and sub form http://i48.tinypic.com/25pjw2a.png 3) Subform pointed at the query created in step 1. Chain of events: 1) User selects item from drop down list on the main form. 2) Old query is deleted, new query is generated (same name). 3) Subform pointed at query does not update, but if you open the query by itself the correct results are displayed. Name of the Query: qryAllOpenJobs name of the subform: subQryAllOpenJobs Also, the Row Source of subQryAllOpenJobs = qryAllOpenJobs Name of the main form: frmManagement

    Read the article

  • Intermittent connection issues with atheros ar9285

    - by MrStatic
    I have an asus K50IJ which has an atheros ar9285 wifi chip. It has decided to start to randomly drop internet. Although the card doesn't seem to notice it has. It will show full signal instead of say 3 bars. I tried to look at the atheros site for the latest driver but they don't even offer driver downloads. I then checked the asus site and it doesn't even list that card in the downloads for this laptop. I run Windows 7 64bit. It will drop either every minute or once a day while I am doing intensive bandwidth usage and when I am just idling.

    Read the article

  • iptables blocking ssh communication

    - by Michal Sapsa
    I'm using this script for iptables: #!/bin/sh echo "1" > /proc/sys/net/ipv4/ip_forward iptables -F iptables -X iptables -F -t nat iptables -X -t nat iptables -F -t filter iptables -X -t filter iptables -t filter -P FORWARD DROP iptables -t filter -A FORWARD -s 192.168.0.0/255.255.0.0 -d 0/0 -j ACCEPT iptables -t filter -A FORWARD -s 0/0 -d 192.168.0.0/255.255.0.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.8.0.1/255.255.255.0 -j MASQUERADE iptables -A FORWARD -s 10.8.0.1/255.255.255.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -j MASQUERADE iptables -I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu iptables -t nat -A PREROUTING -i eth1 -p udp --dport 16161 -j DNAT --to 192.168.0.251:16161 iptables -t nat -A PREROUTING -i eth1 -p udp --sport 16161 -j DNAT --to 192.168.0.251:16161 #openvpn iptables -I INPUT -p tcp --dport 1194 -j ACCEPT iptables -I INPUT -p udp --dport 1194 -j ACCEPT I end up with some iptables rules that should work but don't work - probably because of me. # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *raw :PREROUTING ACCEPT [1657523:1357257330] :OUTPUT ACCEPT [36804:34834370] -A PREROUTING -p icmp -j TRACE -A PREROUTING -p tcp -j TRACE -A OUTPUT -p icmp -j TRACE -A OUTPUT -p tcp -j TRACE COMMIT # Completed on Mon May 26 13:15:43 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *nat :PREROUTING ACCEPT [5033:345623] :INPUT ACCEPT [154:34662] :OUTPUT ACCEPT [6:1968] :POSTROUTING ACCEPT [2:120] -A PREROUTING -i eth0 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A PREROUTING -i eth1 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A POSTROUTING -s 10.8.0.0/24 -j MASQUERADE -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE COMMIT # Completed on Mon May 26 13:15:44 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:44 2014 *filter :INPUT ACCEPT [548:69692] :FORWARD DROP [8:384] :OUTPUT ACCEPT [2120:1097479] -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 1194 -j ACCEPT -A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu -A FORWARD -s 192.168.0.0/16 -j ACCEPT -A FORWARD -d 192.168.0.0/16 -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -i eth0 -o eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -o eth0 -p tcp -m tcp --dport 22 -j ACCEPT COMMIT TRACE at PREROUTEING AND OUTPUT are only for debuging this thing. When I ssh at public ip with port 16161 I don't get any message, only TimeOut so it looks like I don't get communication back to remote server. ETH0 is the world, ETH1 is LAN Any IPTABLES Masters willing to give a hand ? iptables -vL Chain INPUT (policy ACCEPT 20548 packets, 3198K bytes) pkts bytes target prot opt in out source destination 38822 7014K ACCEPT udp -- any any anywhere anywhere udp dpt:openvpn 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:openvpn Chain FORWARD (policy DROP 1129 packets, 64390 bytes) pkts bytes target prot opt in out source destination 214K 11M TCPMSS tcp -- any any anywhere anywhere tcpflags: SYN,RST/SYN TCPMSS clamp to PMTU 4565K 1090M ACCEPT all -- any any 192.168.0.0/16 anywhere 5916K 7315M ACCEPT all -- any any anywhere 192.168.0.0/16 0 0 ACCEPT all -- any any 10.8.0.0/24 anywhere 0 0 ACCEPT tcp -- any any anywhere 192.168.0.251 tcp dpt:16161 Chain OUTPUT (policy ACCEPT 59462 packets, 19M bytes) pkts bytes target prot opt in out source destination

    Read the article

  • Chrome not selecting correct language for Help tab

    - by Andy
    When I click Help in Chrome, a new tab appears with the Google help links etc as expected, but I have a message saying: "This Help Centre is not currently available in your language...", etc. The drop down box at the bottom is not selected correctly for en-GB (my location). Instead it is set at the first language on the list. This happens if I am signed in to my Google account or not. Selecting English from the drop-down works ok, so no great drama. Just wondering if anybody else sees this behaviour? EDIT: Using current stable build 8.0.552.224

    Read the article

  • why is iometer performance slower after first run?

    - by Dan
    I'm doing some benchmarking with IOMeter, and I'm seeing a consistent and susbtantial drop-off in performance after running the first test. These drop-offs are about the same on the three systems I've tested on, which makes me think it's a configuration setting, or just a fact of life about using IOMeter. For example, one system (local RAID 10) went from 388 I/Os per second the first run, to about 211 I/Os per second on every run after that. Everything else about the test was identical, and I also bounced the machine in between runs. So, is this expected behavior, or am I missing something?

    Read the article

  • Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

    - by Phuong Nguyen
    Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

    Read the article

  • Rhythmbox - put a playlist on my iPod

    - by GorillaSandwich
    I have an old iPod nano and currently use iTunes in Windows to management. However, I'm trying to switch to Ubuntu. So far, iPod management is one major holdup. Besides being unable to easily manage podcasts, I also don't see a way to create a playlist and put it on my iPod. I can create a playlist on the computer in Rhythmbox, but I can't drag and drop it onto the iPod. I can create a playlist on the iPod itself, put I can't drag and drop songs from my library into it. If I right-click the songs, I can add them to playlists on the computer, but not on the iPod. How can I create a playlist of music in Rhythmbox and sync it to my iPod?

    Read the article

  • How to pass a filename to a shortcut in Windows

    - by Kendall Frey
    I have a program program.exe and a document document.txt, and to open the document, I can drag document.txt onto program.exe. So far so good. Now I want to call it with a command-line parameter -param so that the full command line is program.exe -param document.txt Unfortunately, I can't do this with drag and drop, so I need to fire up cmd and type in the command manually. This takes too long, and I need an easier way. How can I create a shortcut that I can drop the file onto, and have it call the program with the command-line parameter? I tried setting the shortcut to program.exe -param "%1", but that didn't work, because it appeared to pass only the file name, and not the path, and since the current directory was the one with the program and not the one with the document, it couldn't find the document.

    Read the article

  • Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

    - by Phuong Nguyen
    Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

    Read the article

  • Change Directory Browsing Page in IIS 7.5

    - by Gabriel Ryan Nahmias
    NOTE: This post is tagged ASP Classic but really that's just one of the languages in which I could write it. I really need assistance with configuring IIS (7.5). I have found many scripts and ideas to effect this but I require that it's not be a "drop-in" replacement, as in it must work globally for any possibly directory from one codebase. Here are several links related to this goal: http://mvolo.com/get-nice-looking-directory-listings-for-your-iis-website-with-directorylistingmodule: Best example of what I want and the one with which I can't seem to follow through. http://www.daleanderson.ca/edb/: This is an example of a "drop-in" replacement (at least it's oriented for that purpose). It still has viable code that could be useful to serve as the main file that processes directory traversal.

    Read the article

  • Customize subtitles for QuickTime + Perian

    - by Kit
    How do I customize the display of subtitles (e.g. font, size, color, outline, drop shadow) in QuickTime + Perian? I've seen articles on how to do it but it requires Jubler to edit the subtitles. Is there a straightforward way to customize the subtitles within QuickTime or Perian? If there isn't any, what are other alternatives? VLC can't display drop shadows, and can customize the outline. I'm looking for other ways where I'll only have to use QuickTime.

    Read the article

  • Windows Server 2012 - SSL Cypher Suite Order Not Long Enough

    - by Sam
    I want to re-order the cypher suites on our new Windows Server 2012 box to help mitigate the BEAST vulnerability for our clients. I went to Local Group Policy => Computer Configuration => Administrative Templates => Network => SSL Configuration Settings, opened SSL Cypher Suite Order, enabled it, and copied the values from the SSL Cypher Suites textbox. I pasted them into notepad, re-ordered them, then copied+pasted them back into the SSL Cypher Suites textbox. However, the box isn't long enough to hold them all, despite the fact that the length didn't change. I would have to drop the last 3 cyphers (SSL_CK_DES_192_EDE3_CBC_WITH_MD5,TLS_RSA_WITH_NULL_SHA256,TLS_RSA_WITH_NULL_SHA) in order for it to fit. Should I just drop them? Other ideas?

    Read the article

  • Steam app and age verification issue

    - by TronicZomB
    I have OSX 10.9.4 with the Steam App (API v016 and package versions 1407966480) installed. When I would visit game pages that required age verification, my birthday would be filled in due to being logged in and I would just click OK to move past. Now the age verification shows up with January 1st, 2014 each time and it will not let me change the date. The drop down menus just show up blank. I have tried to log out of my computer, log out of Steam, restart Steam, restart my computer, and reinstall Steam. Nothing has worked and it continues to have this issue. When I visit the Steam website, the age verification drop downs work just fine. What is causing this issue? And/or how can I fix this issue?

    Read the article

  • Kill xserver from command line (init 3/5 does not work)

    - by John Smith
    Hi, I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

    Read the article

  • Keep source IP after NAT

    - by John Miller
    Until today I used a cheapy router so I can share my internet connection and keep a webserver online too, while using NAT. Users IP ($_SERVER['REMOTE_ADDR']) was fine, I was seeing class A IPs of users. But as traffic grown up everyday, I had to install a Linux Server (Debian) to share my Internet Connection, because my old router couldn't keep the traffic anymore. I shared the internet via IPTABLES using NAT, but now, after forwarding port 80 to my webserver, now instead of seeing real users IP, I see my Gateway IP (Linux Internal IP) as any user IP Address. How to solve this issue? I edited my post, so I can paste the rules I'm currently using. #!/bin/sh #I made a script to set the rules #I flush everything here. iptables --flush iptables --table nat --flush iptables --delete-chain iptables --table nat --delete-chain iptables -F iptables -X # I drop everything as a general rule, but this is disabled under testing # iptables -P INPUT DROP # iptables -P OUTPUT DROP # these are the loopback rules iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # here I set the SSH port rules, so I can connect to my server iptables -A INPUT -p tcp --sport 513:65535 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --sport 22 --dport 513:65535 -m state --state ESTABLISHED -j ACCEPT # These are the forwards for 80 port iptables -t nat -A PREROUTING -p tcp -s 0/0 -d xx.xx.xx.xx --dport 80 -j DNAT --to 192.168.42.3:80 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p tcp -s 192.168.42.3 --sport 80 -j ACCEPT # These are the forwards for bind/dns iptables -t nat -A PREROUTING -p udp -s 0/0 -d xx.xx.xx.xx --dport 53 -j DNAT --to 192.168.42.3:53 iptables -t nat -A POSTROUTING -o eth0 -d xx.xx.xx.xx -j SNAT --to-source 192.168.42.3 iptables -A FORWARD -p udp -s 192.168.42.3 --sport 53 -j ACCEPT # And these are the rules so I can share my internet connection iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A FORWARD -i eth0:1 -j ACCEPT If I delete the MASQUERADE part, I see my real IP while echoing it with PHP, but I don't have internet. How to do, to have internet and see my real IP while ports are forwarded too? ** xx.xx.xx.xx - is my public IP. I hid it for security reasons.

    Read the article

  • WiFi signal is lost every 3 minutes

    - by Software Monkey
    For several weeks now my Android phone has been losing it's WiFi signal momentarily, typically at about 3 minute intervals (about 3 minutes, 1.5 seconds) and occasionally at some longer interval that always seems to be just over 3 minutes. This causes an interruption of several seconds while the WiFi connection is re-established and typically fails any kind of download/streaming that is happening, makes web sites "unreachable" and generally makes the phone unusable as a data device due to the frequency. The signal remains down for about a second, but the phone takes a few more seconds to reconnect to the router. This happens regardless of proximity to the router, which otherwise show a very strong signal - usually -40 to -30 dBm or better in the same room, nowhere less than 060 dBm anywhere in the house. Changing channels does not help (I've tried 1, 4, 8 and 9). Nor does turning off the router's guest access. Nor does turning off the 5.0 GHz band. Monitoring the signal on my phone with WiFi analyzer, shows all WiFi signals on all channels drop to nothing when the WiFi connection is lost (there are two other networks on different channels which are strong enough to be relevant, with about 6 others constantly fading in and out). WiFi analyzer shows 3 separate signals for my router, the main 2.4 GHz, the guest 2.4 GHz and the 5.0 GHz. Using WiFi Analyzer on my wife's phone side-by-side shows no change in signal when my phone drops, nor does her phone drop. Monitoring the signal using our laptop, side-by-side likewise shows no signal loss and likewise the laptop does not lose it's WiFi connection. But, at work, the phone seems to not exhibit the same behavior, or, if it does, it's very occasional. Monitoring it all day at work I only saw the signal drop 3 or 4 times. The signal strength of the various networks there is comparatively weak. AT&T were super helpful: "Sorry, we can't help you with WiFi problems. You could try doing a factory reset on your phone". </sarcasm The router is relatively new, but has been working fine with this phone since last Dec. Phone : Motorola Atrix (about 8 months old). Router : Belkin N750 DB (F9K1103 v1 (01C)). Router Firmware: 1.00.46 (2011/10/28 6:37:11). Security : WPA/WPA2-Personal (PSK)

    Read the article

  • iptables ACCEPT policy

    - by kamae
    In Redhat EL 6, iptables INPUT policy is ACCEPT but INPUT chain has REJECT entry in the end. /etc/syconfig/iptables is as below: *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT Do you know why the policy is ACCEPT not DROP? I think setting DROP policy is safer than ACCEPT in case to make mistake in the chain. Actually the policy is not applied to any packet: # iptables -L -v Chain INPUT (policy ACCEPT 0 packets, 0 bytes)

    Read the article

  • How can I make a Prism webapp look like Firefox to a website? (user agent spoofing)

    - by Alex Aaron Goven
    I thought it would be cool to use Mozilla's Prism to create a webapp for min.us, but drag and drop is disallowed because the site doesn't see the program as Firefox, Chrome or Safari, those of which are apparently the only browsers allowed to do drag and drop for fear that something will be horribly broken. I'm pretty sure Prism runs on the same engine as Firefox, yet I wouldn't doubt it if Prism is running on an older version since it's kind of a forgotten beta. Anyways, like the title says, I want to be able to make Prism webapps appear look like Firefox to websites to unlock awesome features. Also, if it can only be done with Fluid, then I answers regarding that will be fine. I'm not sure what engine it's running though.

    Read the article

  • Text editor for Mac that will open any file

    - by Dinah
    In Windows, every text editor I encountered allowed me to drag and drop any file type into it and it opened. Apparently, Mac app developers have a different philosophy because I can't find a simple free text editor for OS X that will do this. TextWrangler came highly recommended but it can't accomplish this simple feat. Can anyone suggest one? Edit apparently on at least some editors, there is a distinction between drag/drop in the document list area vs. the typing area. In addition to the accepted answer, this is one thing to be aware of. I still don't know why it doesn't work in TextEdit, but this is true for TextWrangler and Smultron.

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >