Search Results

Search found 1429 results on 58 pages for 'fan'.

Page 55/58 | < Previous Page | 51 52 53 54 55 56 57 58  | Next Page >

  • SQLAuthority News – Pluralsight Course Review – Practices for Software Startups – Part 2 of 2

    - by pinaldave
    This is the second part of the two part series of Practices for Software Startup Pluralsight Course. Please read the first part of this series over here. The course is written by Stephen Forte (Blog | Twitter). Stephen Forte is the Chief Strategy Officer of the venture backed company, Telerik. Personal Learning Schedule After these three sessions it was 6:30 am and time to do my own blog.  But for the rest of the day, I kept thinking about the course, and wanted to go back and finish.  I was wishing that I had woken up at 3 am so I could finish all at one go.  All day long I was digesting what I had learned.  At 10 pm, after my daughter had gone to bed, I sighed on again.  I was not disappointed by the long wait.  As I mentioned before, Stephen has started four to six companies, and all of them are very successful today. Here is the video I promised yesterday – it discusses the importance of Right Sizing Your Startup. The Heartbeat of Startup – Technology Stephen has combined all technology knowledge into one 30 minute session.  He discussed  how to start your project, how to deal with opinions, and how to deal with multiple ideas – every start up has multiple directions it can go. He spent a lot of time emphasized deciding which direction to go and how to decide which will be the best for you.  He called it a continuous development cycle. One of the biggest hazards for a start-up company is one person deciding the direction the company will go, until down the road another team member announces that there is a glitch in their part of the work and that everyone will have to start over.  Even though a team of two or five people can move quickly, often the decision has gone too long and cannot be easily fixed.   Stephen used an example from his own life:  he was biased for one type of technology, and his teammate for another.  In the end they opted for his teammate’s  choice , and in the end it was a good decision, even though he was unfamiliar with that particular program.  He argues that technology should not be a barrier to progress, that you cannot rely on your experience only.  This really spoke to me because I am a big fan of SQL, but I know there is more out there, and I should be more open to it.  I give my thanks to Stephen, I learned something in this module besides startups. Money, Success and Epic Win! The longest, but most interesting, the module was funding your start-up.  You need to fund the start-up right at the very beginning, if not done right you will run into trouble.  The good news is that a few years ago start-ups required a lot more money – think millions of dollars – but now start-ups can get off the ground for thousands.  Stephen used an example of a company that years ago would have needed a million dollars, but today could be started for $600.  It is true that things have changed, but you still need money.  For $600 you can start small and add dynamically, as needed.  But the truth is that if you have $600, $6000, or $6 million, it will be spent.  Don’t think of it as trying to save money, think of it as investing in your future.   You will need money, and you will need to (quickly) decide what you do with the money: shares, stakeholders, investing in a team, hiring a CEO.  This is so important because once you have money and start the company, the company IS your money.  It is your biggest currency – having a percentage of ownership in the company.  Investors will want percentages as repayment for their investment, and they will want a say in the business as well.  You will have to decide how far you will dilute your shares, and how the company will be divided, if at all.  If you don’t plan in advance, you will find that after gaining three or four investors, suddenly you are the minority owner in your own dream.  You need to understand funding carefully.  This single module is worth all the money you would have spent on the whole course alone.  I encourage everyone to listen to this single module even if they don’t watch any of the others.     Press End to Start the Game – Exists! The final module is exit strategies.  You did all this work, dealt with all political and legal issues.  What are you going to get out of it? The answer is simple: money.  Maybe you want your company to be bought out, for you talent to bring you a profit.  You can sell the company to someone and still head it.  Many options are available.  You could sell and still work as an employee but no longer own the company.  There are many exit strategies.  This is where all your hard work comes into play.  It is important not to feel fooled at any step.  There are so many good ideas that end up in the garbage because of poor planning, so that if you find yourself successful, you don’t want to blow it at this step!  The exit is important.  I thought that this aspect of the course was completely unique, and I loved Stephen’s point of view.  I was lost deep in thought after this module ended.  I actually took two hours worth of notes on this section alone – and it was only a three hour course.  I am planning on attending this course one more time next week, just to catch up on all the small bits of wisdom I’m sure I missed. Thank you Stephen for bringing your real world experience with us!  I recommend that everyone attends this course, even if they don’t want to begin their own start-up company. It was indeed a long day for me. Do not forget to read part 1 of this story and attend course Practices for Software Startup Pluralsight Course. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Getting MySQL work with Entity Framework 4.0

    - by DigiMortal
    Does MySQL work with Entity Framework 4.0? The answer is: yes, it works! I just put up one experimental project to play with MySQL and Entity Framework 4.0 and in this posting I will show you how to get MySQL data to EF. Also I will give some suggestions how to deploy your applications to hosting and cloud environments. MySQL stuff As you may guess you need MySQL running somewhere. I have MySQL installed to my development machine so I can also develop stuff when I’m offline. The other thing you need is MySQL Connector for .NET Framework. Currently there is available development version of MySQL Connector/NET 6.3.5 that supports Visual Studio 2010. Before you start download MySQL and Connector/NET: MySQL Community Server Connector/NET 6.3.5 If you are not big fan of phpMyAdmin then you can try out free desktop client for MySQL – HeidiSQL. I am using it and I am really happy with this program. NB! If you just put up MySQL then create also database with couple of table there. To use all features of Entity Framework 4.0 I suggest you to use InnoDB or other engine that has support for foreign keys. Connecting MySQL to Entity Framework 4.0 Now create simple console project using Visual Studio 2010 and go through the following steps. 1. Add new ADO.NET Entity Data Model to your project. For model insert the name that is informative and that you are able later recognize. Now you can choose how you want to create your model. Select “Generate from database” and click OK. 2. Set up database connection Change data connection and select MySQL Database as data source. You may also need to set provider – there is only one choice. Select it if data provider combo shows empty value. Click OK and insert connection information you are asked about. Don’t forget to click test connection button to see if your connection data is okay. If everything works then click OK. 3. Insert context name Now you should see the following dialog. Insert your data model name for application configuration file and click OK. Click next button. 4. Select tables for model Now you can select tables and views your classes are based on. I have small database with events data. Uncheck the checkbox “Include foreign key columns in the model” – it is damn annoying to get them away from model later. Also insert informative and easy to remember name for your model. Click finish button. 5. Define your classes Now it’s time to define your classes. Here you can see what Entity Framework generated for you. Relations were detected automatically – that’s why we needed foreign keys. The names of classes and their members are not nice yet. After some modifications my class model looks like on the following diagram. Note that I removed attendees navigation property from person class. Now my classes look nice and they follow conventions I am using when naming classes and their members. NB! Don’t forget to see properties of classes (properties windows) and modify their set names if set names contain numbers (I changed set name for Entity from Entity1 to Entities). 6. Let’s test! Now let’s write simple testing program to see if MySQL data runs through Entity Framework 4.0 as expected. My program looks for events where I attended. using(var context = new MySqlEntities()) {     var myEvents = from e in context.Events                     from a in e.Attendees                     where a.Person.FirstName == "Gunnar" &&                             a.Person.LastName == "Peipman"                     select e;       Console.WriteLine("My events: ");       foreach(var e in myEvents)     {         Console.WriteLine(e.Title);     } }   Console.ReadKey(); And when I run it I get the result shown on screenshot on right. I checked out from database and these results are correct. At first run connector seems to work slow but this is only the effect of first run. As connector is loaded to memory by Entity Framework it works fast from this point on. Now let’s see what we have to do to get our program work in hosting and cloud environments where MySQL connector is not installed. Deploying application to hosting and cloud environments If your hosting or cloud environment has no MySQL connector installed you have to provide MySQL connector assemblies with your project. Add the following assemblies to your project’s bin folder and include them to your project (otherwise they are not packaged by WebDeploy and Azure tools): MySQL.Data MySQL.Data.Entity MySQL.Web You can also add references to these assemblies and mark references as local so these assemblies are copied to binary folder of your application. If you have references to these assemblies then you don’t have to include them to your project from bin folder. Also add the following block to your application configuration file. <?xml version="1.0" encoding="utf-8"?> <configuration> ...   <system.data>     <DbProviderFactories>         <add              name=”MySQL Data Provider”              invariant=”MySql.Data.MySqlClient”              description=”.Net Framework Data Provider for MySQL”              type=”MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data,                   Version=6.2.0.0, Culture=neutral,                   PublicKeyToken=c5687fc88969c44d”          />     </DbProviderFactories>   </system.data> ... </configuration> Conclusion It was not hard to get MySQL connector installed and MySQL connected to Entity Framework 4.0. To use full power of Entity Framework we used InnoDB engine because it supports foreign keys. It was also easy to query our model. To get our project online we needed some easy modifications to our project and configuration files.

    Read the article

  • top Tweets SOA Partner Community – September 2012

    - by JuergenKress
    Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity OracleBlogs ?Oracle SOA Suite for healthcare integration Dashboard http://ow.ly/1mcJvp SOA Community ?Lost in Translation &ndash; Common Mistakes Interpreting Patterns &ndash; Mark Simpson, Griffiths-Waite @ SOA, Cloud & Service… ServiceTechSymposium Matthias Zieger, Accenture just added to the agenda to co-present: "Service Modeling & BPM Business Value Patterns" http://ow.ly/ddu7A ServiceTechSymposium ?Newly updated session title and abstract: "Big Data and its impact on SOA", by Demed L'Her, Oracle. http://ow.ly/diOq2 Deepak Arora ?To PaaS or SaaS - the latest discussions with customers using SOA Suite - what are your thoughts #soa #soacommunity SOA Community top Tweets SOA Partner Community July 2012 - are you one of them? If yes please rt! https://soacommunity.wordpress.com/2012/08/28/top-tweets-soa-partner-community-august-2012/ … #soacommunity Sandor Nieuwenhuijs Checkout the BeNeLux Architectural Networking Event during Oracle Open World - meet your peers and the experts http://www.ddg-servicecenter.com/networkmanager/oow/architect/default.aspx … SOA Community ?top Tweets SOA Partner Community &ndash; August 2012 http://wp.me/p10C8u-uf SOA Community ?Follow SOA Community on facebook http://www.facebook.com/soacommunity #soacommunity SOA Community ?New Service to promote Your SOA & BPM events at http://oracle.com/events for SOA & BPM Specialized Partners Only! #soacommunity #opn #oracle Jan van Zoggel ?Hotel check, flight check, overview of sessions to visit check http://jvzoggel.wordpress.com/2012/08/27/soa-cloud-servicetech-symposium/ … I'm ready for SOA, Cloud & Service Technology Symposium SOA Community SOA & BPM Specialized Partners Only! New Service to Promote Your SOA & BPM Events at http://oracle.com/events http://wp.me/p10C8u-sH SOA Community Call for content for the next community newsletter. Do you want to publish your success & best practice? Send it @soacommunity #soacommunity SOA Community SOA Adoption in the Brazilian Ministry of Health - Case Study by Ricardo Puttini, University of Brasilia @ SOA, Cloud & Service… Jan van Zoggel ?Just registered for the 5th International SOA, Cloud & Service Technology Symposium in London. Looking forward to it. http://www.servicetechsymposium.com/ OTNArchBeat ?Want to prepare for Oracle SOA Specialization? @t_winterberg offers a suggestion. http://pub.vitrue.com/5Hqu OTNArchBeat ?Oracle BPM enable BAM | @deltalounge http://pub.vitrue.com/BCwj SOA Community Presentations & Training material OFM Summer Camps & Impressions & Feedback http://wp.me/p10C8u-sF Emiel Paasschens Nice! Pdf document on how to use a #Oracle #SOA Suite Domain Value Map (DVM) in the OSB: http://bit.ly/RzyS9w #yam OracleBlogs ?Using Cloud OER to Find Fusion Applications On-Premise Service Concrete WSDL URL http://ow.ly/1m4lz7 demed ?Free VIP pass for @techsymp if you are in London Sep. 24-25. Be the first one to retweet this and I'll DM you details! http://www.servicetechsymposium.com/speaker_bios.php?id=demed_lher … Jan van Zoggel blogpost: Oracle Service Bus duplicate message check using Oracle Coherence caching http://jvzoggel.wordpress.com/2012/08/20/osb-duplicate-message-with-coherence/ … OTNArchBeat ?Oracle Service Bus duplicate message check using Coherence | @jvzoggel http://pub.vitrue.com/ckY8 Oracle UPK & Tutor Synaptis and Oracle Present: Leveraging UPK Throughout the Project Lifecycle: Leveraging UPK throughout the Proj... http://bit.ly/OS2Rbg Rolando Carrasco ?New entry @ oracleradio http://bit.ly/SEvwwS @soacommunity @oracleace How to identify duplicated messages on Oracle SOA SUITE? SOA Community ?Business Driven Development (BDD) Demo Now Available! http://wp.me/p10C8u-sf OTNArchBeat ?Installing Oracle SOA Suite10g on Oracle Enterprise Linux | @lonnekedikmans http://pub.vitrue.com/BEyD OTNArchBeat ?Best practices for Oracle real-time data integration | Frank Ohlhorst http://pub.vitrue.com/1fH1 ServiceTechSymposium ?New OTN podcast featuring speakers Thomas Erl, Tim Hall and Demed L’Her just published. Tune into 1st 3 parts here: http://ow.ly/d1RRn OTNArchBeat ?SOA, Cloud, and Service Technologies - Part 4 of 4 - Best selling SOA author Thomas Erl talks about the latest title... http://ow.ly/1m0txY SOA Community Win a free conference pass for the SOA, Cloud + Service Technology Symposium &ndash; become a soacommunity facebook fan!… Lonneke Dikmans VENNSTER BLOG: Installing Oracle SOA Suite10g on Oracle Enterpris... http://blog.vennster.nl/2012/08/installing-oracle-soa-suite-10g-on.html?spref=tw … PeterPaul vande Beek published a blog on exporting Oracle #BPM metrics to a #DWH http://www.deltalounge.net/wpress/2012/08/export-oracle-bpm-metrics-to-a-data-warehouse/ … #soacommunity SOA Community ?Do you follow us on facebook http://www.facebook.com/soacommunity #soacommunity C2B2 Consulting ?Cloud-based Enterprise Architecture by Steve Millidge, C2B2 Consulting @ SOA, Cloud &amp; Service … http://wp.me/p10C8u-sv via @soacommunity Gertjan van het Hof Storing SCA Metadata in the Oracle Metadata Services Repository http://www.oracle.com/technetwork/articles/soa/fonnegra-storing-sca-metadata-1715004.html?msgid=3-6903117805 … arjankramer ?Encrypted OSB Service account passwords http://dlvr.it/20hbNV Richard van Tilborg BPM the Battle http://lnkd.in/yFAJaW OTNArchBeat Using Cloud OER to Find Fusion Applications On-Premise Service Concrete WSDL URL | @RahejaRajesh http://pub.vitrue.com/YDCD SOA Proactive ?Webcast: Introduction to SOA Human Workflow, 8/23, 10 AM EDT. Register @ http://bit.ly/Nx77sY Lucas Jellema ?Programmatically admnistration of OSB using JXM & MBeans. Interesting example is given in https://blogs.oracle.com/ateamsoab2b/entry/automatic_disabling_proxy_service_when … orclateamsoa ?A-Team Blog #ateam: Automatically Disable Proxy Service to avoid overloading OSB http://ow.ly/1lXGKV Atul_Kumar ?Oracle Enterprise Gateway – OEG 11gR1 (11.1.1.*) for beginners http://goo.gl/fb/EJboE Estafet Limited Advanced SOA Boot camp @soacommunity in Munich was excellent.@wlscommunity Learnt a lot and liked the format. SOA Community Oracle Fusion Applications Design Patterns Now Available For Developers by Ultan O'Broin http://wp.me/p10C8u-sd SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA Community twitter,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • HDMI video connection cuts top and bottom borders of screen

    - by Luis Alvarado
    Ok this is an extension of another problem I had with a VGA connection and an Nvidia Geforce GT 440 card. Here is goes the explanation of this particular problem: I have a Soneview 32' TV. This TV has many connections including VGA (First reason I bought it), HDMI (Second reason but did not have a HDMI cable at that time) and DVI. I have had this TV for little over a month now, actually I had it to celebrate the release of Ubuntu 11.10 and started using it exactly on that date (I know too much fan there but hey, I like geek stuff). I started using it with the VGA cable. After 2 weeks I bought an Nvidia GT440 card. The previous 9500GT was working correctly with no problems whatsoever. I installed the GT440 and the first problem that I encountered using this latest card is mentioned here: Nvidia GT 440 black screen problem when loading lightdm greeter. The solution to this problem was to actually disconnect then connect again the VGA cable. This would result in the screen showing me the lightdm screen for my login. If I did not disconnect then connect the cable I could be there forever thinking that there is no video signal. I got tired of looking for answers that did not work and for solutions that made me literally have to install Ubuntu again. I just went and bought a HDMI cable and changed the VGA one for that one. It worked and I did not have to disconnect/connect the cable but now I have this problem when using any resolution. My normal resolution is 1920x1080 (This TV is 1080HD) so in VGA I could use this resolution with no problem, but on HDMI am getting the borders cut out. Here is a pic: As you can see from the PIC, the Launcher icons only show less than 50% of their witdh. Forget about the top and bottom parts, I can access them with the mouse but I can not visualize them in the screen. It is like it's outside of the TVs view. Basically there is like 20 to 30 pixels gone from all sides. I searched around and came to running xrand --verbose to see what it could detect from the TV. I got this: cyrex@cyrex:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 175, current 1920 x 1080, maximum 1920 x 1080 default connected 1920x1080+0+0 (0x164) normal (normal) 0mm x 0mm Identifier: 0x163 Timestamp: 465485 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1920x1080 (0x164) 103.7MHz *current h: width 1920 start 0 end 0 total 1920 skew 0 clock 54.0KHz v: height 1080 start 0 end 0 total 1080 clock 50.0Hz 1920x1080 (0x165) 105.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 55.1KHz v: height 1080 start 0 end 0 total 1080 clock 51.0Hz 1920x1080 (0x166) 107.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 56.2KHz v: height 1080 start 0 end 0 total 1080 clock 52.0Hz 1920x1080 (0x167) 109.9MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 57.2KHz v: height 1080 start 0 end 0 total 1080 clock 53.0Hz 1920x1080 (0x168) 112.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 58.3KHz v: height 1080 start 0 end 0 total 1080 clock 54.0Hz 1920x1080 (0x169) 114.0MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 59.4KHz v: height 1080 start 0 end 0 total 1080 clock 55.0Hz 1680x1050 (0x16a) 98.8MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 58.8KHz v: height 1050 start 0 end 0 total 1050 clock 56.0Hz 1680x1050 (0x16b) 100.5MHz h: width 1680 start 0 end 0 total 1680 skew 0 clock 59.9KHz v: height 1050 start 0 end 0 total 1050 clock 57.0Hz 1600x1024 (0x16c) 95.0MHz h: width 1600 start 0 end 0 total 1600 skew 0 clock 59.4KHz v: height 1024 start 0 end 0 total 1024 clock 58.0Hz 1440x900 (0x16d) 76.5MHz h: width 1440 start 0 end 0 total 1440 skew 0 clock 53.1KHz v: height 900 start 0 end 0 total 900 clock 59.0Hz 1360x768 (0x171) 65.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 48.4KHz v: height 768 start 0 end 0 total 768 clock 63.0Hz 1360x768 (0x172) 66.8MHz h: width 1360 start 0 end 0 total 1360 skew 0 clock 49.2KHz v: height 768 start 0 end 0 total 768 clock 64.0Hz 1280x1024 (0x173) 85.2MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.6KHz v: height 1024 start 0 end 0 total 1024 clock 65.0Hz 1280x960 (0x176) 83.6MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 65.3KHz v: height 960 start 0 end 0 total 960 clock 68.0Hz 1280x960 (0x177) 84.8MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 66.2KHz v: height 960 start 0 end 0 total 960 clock 69.0Hz 1280x720 (0x178) 64.5MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 50.4KHz v: height 720 start 0 end 0 total 720 clock 70.0Hz 1280x720 (0x179) 65.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.1KHz v: height 720 start 0 end 0 total 720 clock 71.0Hz 1280x720 (0x17a) 66.4MHz h: width 1280 start 0 end 0 total 1280 skew 0 clock 51.8KHz v: height 720 start 0 end 0 total 720 clock 72.0Hz 1152x864 (0x17b) 72.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.1KHz v: height 864 start 0 end 0 total 864 clock 73.0Hz 1152x864 (0x17c) 73.7MHz h: width 1152 start 0 end 0 total 1152 skew 0 clock 63.9KHz v: height 864 start 0 end 0 total 864 clock 74.0Hz ....Many Resolutions later... 320x200 (0x1d1) 10.2MHz h: width 320 start 0 end 0 total 320 skew 0 clock 31.8KHz v: height 200 start 0 end 0 total 200 clock 159.0Hz 320x175 (0x1d2) 9.0MHz h: width 320 start 0 end 0 total 320 skew 0 clock 28.0KHz v: height 175 start 0 end 0 total 175 clock 160.0Hz 1920x1080 (0x1dd) 333.8MHz h: width 1920 start 0 end 0 total 1920 skew 0 clock 173.9KHz v: height 1080 start 0 end 0 total 1080 clock 161.0Hz If it helps, the Refresh Rate at 1920x1080 is 60. There is a flickering effect at this resolution using HDMI but not VGA which I imagine is related to the borders cut off issue am asking here. I have also done the following but this will only solve the problem on lower resolutions than 1920x1080 or on others TV (My father has a Sony TV where this problem is also solved): NVIDIA WAY Go to Nvidia-Settings and there will be an option that will have more features if a HDMI cable is connected. In the next pic the option is DFP-1 (CNDLCD) but this name changes depending on what device the PC is connected to: Uncheck Force Full GPU Scaling What this will do for resolutions LOWER than 1920x1080 (At least in my case) is solve the flickering problem and fix the borders cut by the monitor. Save to Xorg.conf file the changes made after changing to a resolution acceptable to your eyes. TV WAY If you TV has OSD Menu and this menu has options for scanning the screen resolution or auto adjusting to it, disable them. Specifically the option about SCAN. If you have an option for AV Mode disable it. Basically disable any option that needs to scan and scale the resolution. Test one by one. In the case of my father's TV this did it. In my case, the Nvidia solved it for lower resolutions. NOTE: In the case this is not solved in the next couple of weeks I will add this as the answer but take into consideration that the issue is still active with 1920x1080 resolutions.

    Read the article

  • Interview with Lenz Grimmer about MySQL Connect

    - by Keith Larson
    Keith Larson: Thank you for allowing me to do this interview with you.  I have been talking with a few different Oracle ACEs   about the MySQL Connect Conference. I figured the MySQL community might be missing you as well. You have been very busy with Oracle Linux but I know you still have an eye on the MySQL Community. How have things been?Lenz Grimmer: Thanks for including me in this series of interviews, I feel honored! I've read the other interviews, and really liked them. I still try to follow what's going on over in the MySQL community and it's good to see that many of the familiar faces are still around. Over the course of the 9 years that I was involved with MySQL, many colleagues and contacts turned into good friends and we still maintain close relationships.It's been almost 1.5 years ago that I moved into my new role here in the Linux team at Oracle, and I really enjoy working on a Linux distribution again (I worked for SUSE before I joined MySQL AB in 2002). I'm still learning a lot - Linux in the data center has greatly evolved in so many ways and there are a lot of new and exciting technologies to explore. Keith Larson: What were your thoughts when you heard that Oracle was going to deliver the MySQL Connect conference to the MySQL Community?Lenz Grimmer: I think it's testament to the fact that Oracle deeply cares about MySQL, despite what many skeptics may say. What started as "MySQL Sunday" two years ago has now evolved into a full-blown sub-conference, with 80 sessions at one of the largest corporate IT events in the world. I find this quite telling, not many products at Oracle enjoy this level of exposure! So it certainly makes me feel proud to see how far MySQL has come. Keith Larson: Have you had a chance to look over the sessions? What are your thoughts on them?Lenz Grimmer: I did indeed look at the final schedule.The content committee did a great job with selecting these sessions. I'm glad to see that the content selection was influenced by involving well-known and respected members of the MySQL community. The sessions cover a broad range of topics and technologies, both covering established topics as well as recent developments. Keith Larson: When you get a chance, what sessions do you plan on attending?Lenz Grimmer: I will actually be manning the Oracle booth in the exhibition area on one of these days, so I'm not sure if I'll have a lot of time attending sessions. But if I do, I'd love to see the keynotes and catch some of the sessions that talk about recent developments and new features in MySQL, High Availability and Clustering . Quite a lot has happened and it's hard to keep up with this constant flow of new MySQL releases.In particular, the following sessions caught my attention: MySQL Connect Keynote: The State of the Dolphin Evaluating MySQL High-Availability Alternatives CERN’s MySQL “as a Service” Deployment with Oracle VM: Empowering Users MySQL 5.6 Replication: Taking Scalability and High Availability to the Next Level What’s New in MySQL Server 5.6? MySQL Security: Past and Present MySQL at Twitter: Development and Deployment MySQL Community BOF MySQL Connect Keynote: MySQL Perspectives Keith Larson: So I will ask you just like I have asked the others I have interviewed, any tips that you would give to people for handling the long hours at conferences?Lenz Grimmer: Wear comfortable shoes and make sure to drink a lot! Also prepare a plan of the sessions you would like to attend beforehand and familiarize yourself with the venue, so you can get to the next talk in time without scrambling to find the location. The good thing about piggybacking on such a large conference like Oracle OpenWorld is that you benefit from the whole infrastructure. For example, there is a nice schedule builder that helps you to keep track of your sessions of interest. Other than that, bring enough business cards and talk to people, build up your network among your peers and other MySQL professionals! Keith Larson: What features of the MySQL 5.6 release do you look forward to the most ?Lenz Grimmer: There has been solid progress in so many areas like the InnoDB Storage Engine, the Optimizer, Replication or Performance Schema, it's hard for me to really highlight anything in particular. All in all, MySQL 5.6 sounds like a very promising release. I'm confident it will follow the tradition that Oracle already established with MySQL 5.5, which received a lot of praise even from very critical members of the MySQL community. If I had to name a single feature, I'm particularly and personally happy that the precise GIS functions have finally made it into a GA release - that was long overdue. Keith Larson:  In your opinion what is the best reason for someone to attend this event?Lenz Grimmer: This conference is an excellent opportunity to get in touch with the key people in the MySQL community and ecosystem and to get facts and information from the domain experts and developers that work on MySQL. The broad range of topics should attract people from a variety of roles and relations to MySQL, beginning with Developers and DBAs, to CIOs considering MySQL as a viable solution for their requirements. Keith Larson: You will be attending MySQL Connect and have some Oracle Linux Demos, do you see a growing demand for MySQL on Oracle Linux ?Lenz Grimmer: Yes! Oracle Linux is our recommended Linux distribution and we have a good relationship to the MySQL engineering group. They use Oracle Linux as a base Linux platform for development and QA, so we make sure that MySQL and Oracle Linux are well tested together. Setting up a MySQL server on Oracle Linux can be done very quickly, and many customers recognize the benefits of using them both in combination.Because Oracle Linux is available for free (including free bug fixes and errata), it's an ideal choice for running MySQL in your data center. You can run the same Linux distribution on both your development/staging systems as well as on the production machines, you decide which of these should be covered by a support subscription and at which level of support. This gives you flexibility and provides some really attractive cost-saving opportunities. Keith Larson: Since I am a Linux user and fan, what is on the horizon for  Oracle Linux?Lenz Grimmer: We're working hard on broadening the ecosystem around Oracle Linux, building up partnerships with ISVs and IHVs to certify Oracle Linux as a fully supported platform for their products. We also continue to collaborate closely with the Linux kernel community on various projects, to make sure that Linux scales and performs well on large systems and meets the demands of today's data centers. These improvements and enhancements will then rolled into the Unbreakable Enterprise Kernel, which is the key ingredient that sets Oracle Linux apart from other distributions. We also have a number of ongoing projects which are making good progress, and I'm sure you'll hear more about this at the upcoming OpenWorld conference :) Keith Larson: What is something that more people should be aware of when it comes to Oracle Linux and MySQL ?Lenz Grimmer: Many people assume that Oracle Linux is just tuned for Oracle products, such as the Oracle Database or our Engineered Systems. While it's of course true that we do a lot of testing and optimization for these workloads, Oracle Linux is and will remain a general-purpose Linux distribution that is a very good foundation for setting up a LAMP-Stack, for example. We also provide MySQL RPM packages for Oracle Linux, so you can easily stay up to date if you need something newer than what's included in the stock distribution.One more thing that is really unique to Oracle Linux is Ksplice, which allows you to apply security patches to the running Linux kernel, without having to reboot. This ensures that your MySQL database server keeps up and running and is not affected by any downtime. Keith Larson: What else would you like to add ?Lenz Grimmer: Thanks again for getting in touch with me, I appreciated the opportunity. I'm looking forward to MySQL Connect and Oracle OpenWorld and to meet you and many other people from the MySQL community that I haven't seen for quite some time! Keith Larson:  Thank you Lenz!

    Read the article

  • ubuntu wifi disconnection & frustratingly connects to unavailable wifi

    - by ashishsony
    Hi, i have already posted this here: here This has happened before with ubuntu 9.1 Beta2 build too that my wifi disconnects if im idle for 5 minutes... so i cant leave my lappy to download anything... i have to keep on continuously using it.. as soon i leave it idle for abt 5 minutes... wifi disconnects... and the pop up asking for password for wifi pops up...with the password already filled in... i just click on connect and it connects again... so whats the use of asking the password if the pre filled in pass works correctly... and this is happening on ubuntu 10.04 Beta2 too... and the workaround is that just open any menu like the applications menu in the taskbar and keep it open... under this state the ubuntu idleness never activates and so the wifi gets never disconnected... this has been confirmed by me many times.. this seems to be repeating again and again... i dont know why... and the second thing i want to report is that there is no way to report this bug from ubuntu... the launchpad.net talks of going through bug reporting process which is done against a definite package... now how does a user know which package would be causing this error?? there should be a more clear process of reporting such bugs to ubuntu team... thirdly the apport utility that reports crashing apps is totally uselss on 10.04 beta 2... as it collests information and reports that i cant submit the report because i dont have 100 other packages... without updating which i cant submit the report.... surely on a beta build there would be packages continuously being updated... so no system would be reported as fully updated... and so no practical apport reporting is possible?? please address these issues... really frustrating all this ... im a big fan of ubuntu but these things really bug me... and just to add fourthly... the suspend/hibernate feature has never ever worked on my toshiba m70-113 laptop... on any ubuntu version... always have to hard reboot after putting into suspend/hibernate mode.. on windows this has never been the case... why cant ubuntu beat windows in such cases too?? i would really like to see this soon... most importantly, when the router switches off... the wifi signals go off... then why the hell ubuntu keeps on connecting to that very wifi like hell and when doesnt connect shows the prompt to manually connect... with the wifi key already filled in... whats the use of saving the key when it has to ask the question from me either to connect or not?? and if its isnt available... just wait when its available.. i have only option to cancel and if i cancel it wont auto-connect!! what the heck?? one can see in the image that it says "authentication required by wireless network" when there isnt any.. as router has gone down!!

    Read the article

  • A Look Back at 2010 Predictions

    - by David Dorf
    Now is the time of year people make their predictions for next year, but before I start thinking about 2011 it's worth a look back to see how my predictions for 2010 fared. 1. Borders and Blockbuster bite the dust. I would have never predicted a strong brand such as Circuit City could die, but now I know it can happen to anyone. Borders has lost the battle with Barnes & Noble and Blockbuster has lost to Netflix. And just to be sure, Amazon put an extra nail in each coffin. Borders received additional investment from Bennett LeBow to keep it afloat, but the stock is down around $1.25 with no profits in sight. Blockbuster filed for bankruptcy back in September. 2. Every retailer finally has a page on Facebook... but very few figure out how to keep fans engaged. Retailer postings become noise, and fans start to unsubscribe. Twitter goes in the same direction. A few standout retailers will figure out how to use social media, and the rest will remain dumbfounded. Most retailers are on the Facebook bandwagon, and their fan bases seem to be increasing thanks to promotions like The Gap's logo redesign, Lowes' black Friday sneak peak, and Walmart's Crowd Savers. There are several examples of f-commerce advancements, including some interesting integrations from Amazon.3. Smartphones consolidate and grow. More and more people will step-up to smartphones, most of which will choose iPhone, Blackberry, and Android phones. Other smartphones will vanish, and networks will start to strain. But retailers will finally embrace mobile as the next big channel. Retail marketing departments will build mobile apps without the help of their IT department, and eventually they will get into a bind. Android has been on a tear lately stealing market share from Blackberry. Palm and Microsoft are trending down, and Apple is holding steady. Smartphone sales are up 15% and expected to continue. Retailers understand the importance of mobile, and some innovative applications have been produced this year. 4. Google helps the little guys. Google will push its Favorite Places project to help give exposure to small retailers and restaurants. They will enable small retailers to act like big ones by providing storefronts, detailed product information, and coupons for consumers. Google will find a way to bring augmented reality to the masses. I can't say I've seen much new from Google regarding Favorite Places, but they've continued to push local product search. From the PC or smartphone, consumers can search for products and see which nearby stores have it stock. Oracle Retail even productized an integration to Google to support this effort. I suppose if Google ever buys Groupon then it will bring them even closer to local shopping. Google talked about augmented humanity, but that has nothing to do with augmented reality. 5. Steve Jobs Is Bugs Bunny and Steve Ballmer is Elmer Fudd. (OK, I stole that headline from an InformationWeek article. I couldn't resist.) Both Apple and Microsoft will continue to open new stores, but only Apple will show real growth. POSReady 2009 (formerly WEPOS) will continue to share the POS market with Linux. The iPhone and iPod will continue to capture market share, but there won't be an Apple tablet. There won't be an Apple tablet? What was I thinking? While Apple has well over 300 stores, there are less than 10 Microsoft stores. Initial impressions show that even though Microsoft is locating its store near Apple Stores, they are not converting customers, with shoppers citing a lack of assortment and high prices. 6. Consolidation of e-commerce software providers. Software vendors in the areas of search, reviews, online call-centers, payments, and e-commerce will consolidate, partly driven by the success of m-commerce and SaaS. Amazon will find someone else to buy, and eBay will continue to lose momentum. Consolidation of e-commerce providers continued with IBM acquiring Sterling Commerce and CoreMetrics, and Oracle recently announcing the acquisition of ATG. Amazon grabbed Zappos, Woot, and Diapers.com to continue its dominance of online selling. While eBay's Marketplace growth may have slowed, its PayPal division is doing quite well, fueled in part by demand for mobile payments. 7. Book publishers mirror music labels. Just as the iPod brought digital downloads to the masses, the Kindle and Nook will power the e-book revolution. Books will continue to use DRM for a few more years before following the path of music. Publishers will try to preserve the margins of hardbacks by associating e-book releases with paperbacks. Amazon has done a good job providing e-reader clients for smartphones, PCs, and tablets. Competition from Barnes & Noble has forced Amazon to support book loaning, and both companies are making it easier for people to publish ebooks (with or without DRM). Progress is slow but steady. 8. NFC makes inroads, RFID treads water. Near Field Communications start to appear in mobile phones, and retailers beta test its use for payments and loyalty programs. RFID tag costs come down a bit, but not enough to spur accelerated adoption.Nokia announced plans to offer NFC-enabled phones in 2011, and rumors are swirling about NFC in the upcoming iPhone.  I think NFC is heading in the right direction, and I've heard more interest from retailers about specialized uses for RFID.9. Digital Signage goes the way of augmented reality. People use their camera phones to leave geo-tagged notes all over cities, rating stores and restaurants, and "painting" graffiti. But people get tired of holding their phones in front of their faces, so AR glasses are offered in much the same way bluetooth headsets emerged. Retailers experiement with in-store advertising using AR. Several retailers like Pizza Hut, Benetton, and Target have experimented with AR but its still somewhat of a gimmick used by marketing.  I think this prediction is a year or two too early. 10. JDA flip-flops again. After announcing their embracing of the .Net architecture, then switching to J2EE after the Manugistics acquisition, JDA will finally decide to standardize on Apple's Objective C. Everything will be ported to the iPhone and be available on the AppStore. After all, there's not much left to try. This was, of course, a joke but the sentiment is still valid.  JDA seems more supply-chain focused than retail focused, which is a an outcrop if their i2 acquisition.  Of the 10 predictions, I'm going to say I got 6 somewhat correct.  (Don't you just love grading your own paper?)  Soon I'll post my predictions for 2011 so be on the lookout.  Until then here's one more prediction:  Va Tech beats Stanford in the Orange Bowl -- count on it!

    Read the article

  • CodePlex Daily Summary for Saturday, March 27, 2010

    CodePlex Daily Summary for Saturday, March 27, 2010New ProjectsAlter gear SQL index Management: SQL Index management displays a list of indexes available for the chosen database and allows you to select an individual / group of indexes to be r...ASP League Ladder System: An ASP ladder / league system for online gaming league or real life leagues also.Augmented Reality Strategy Simulator: Augmented Reality Strategy Simulator is a software suite to promote computer aided strategy planning. Sports team can visualize their strategy usin...Boo syntax highlighting for Visual Studio 2010: Simple syntax hightlighting VSX add-in for Boo language in Visual Studio 2010.easySan: easySan zur einfachen Mitgliedsverwaltung im BRKFsUnit: FsUnit makes unit-testing with F# more enjoyable. It adds a special syntax to your favorite .NET testing framework.Laughing Dog XNA Framework: Laughing Dog is a simple to use, component based 2D framework for XNA game development. At present it is very early in development and as such is f...miniTodo: WPFでMVVMの練習にてきとうに作ったTODOアプリ 実用は無理です。My Common Library on .NET with CSharp: My Common Library on .NET with CSharp, it conclude database assecc, encrypt string, data caching, StringUtility, thank you for your view.Native code wrapping using c# : fsutil sparse commands: Ever thought about creating HUGE FILES for future use but felt bad for the wasted memory? Well, SPARSE FILES are the ANSWER! This FSUTIL SPARSE CO...Open SOA Platform: A centralized system for administering applications throught a SOA Enterprise Service Bus: Runtime environment (PROD, DEV, ...) , application and s...P-DBMS: Network and Database ProjectPraiseSight: PraiseSight is supposed to become a practical tool for churches to catalog an present their songs, lyrics and presentations on a beamer. The soluti...Pretty Good Frontend: Pretty Good Frontend is a sample frontend for ConfigMgr (SCCM) 2007 and MDT 2010 Zero Touch. S3Appender (Appender for Log4Net that Uses Amazon S3 For Storing Log Files): The S3Appender is a log4net appender that stores log events in either a MemoryStream or FileStream and sends them to S3 based on time intervals and...sEmit: sEmit (sms emitter) is an application written in C# which was built to send text messages. The project was founded in May 2009 by cansik. It works ...Silverlight RIA Tools: A tool set that generates a full RIA Solutions in Silverlightthommo cannon: Cannon for shooting down ThommosTianjin Polytechnic University Online Judge: Online Judge System Built on Microsoft technologies. Vision & Scope: A distributed OJ Solution on Windows and Cloud. Technologies used or planed...Tinare: Tinare is an byte encryption and decryption alogrithm. The input key is a string password.TinyPlug: Small Plugin Manager, written in C# Allows a project to define supported interfaces, and at runtime add plugins which support (inherit) these in...Utility niconv helps to convert text from one encoding to another: .NET implementation of GUN iconv console converter utility. The niconv program converts text from one encoding to another encoding. In the future r...WareFeed - Software Business Analytics: WareFeed is a simple but effective Software Business Analytics tool written in PHP and compatible others languages such as .NET, Java or Python. It...Y36API1: Semestralni projekt na Y36APINew ReleasesAlter gear SQL index Management: Setup 1.0.0: setup for first alpha releaseASP League Ladder System: ASPLeagueRelease_0_4_1: Release v 0.41Augmented Reality Strategy Simulator: Augmented Reality Strategy Simulator: Version 1.0 InstallerAutoAudit: AutoAudit 1.10e: Version 1.10e will be the final iteration of version 1 development. Version 2 will begin adding switches and options. Pleae email your suggestio...Boo syntax highlighting for Visual Studio 2010: Boo syntax VS 2010 - alpha: First release TODO: Multiline comments!Chargify.NET: Chargify.NET 0.6: Updated library, using Metered Components and updated Product information.Composer: V1.0.326.1000 Alpha: Initial Alpha release. Should be stable, with minor issues.CoNatural Components: CoNatural Components 1.6: Code fixes: Created helper classes to generate source code for type mapper/materializer. Fixed issue in optimized type materializer when loading ...CRM External View: 1.2: New Features in v1.2 release Password protected views. No more using Web Data Access role from v1. Filtering capabilities Caching for performan...Designit Video Embed Package: Release 1.1.0 beta1: You can now either have the video embeded directly in the template or have a preview in template that opens the video in a lightbox window.FsUnit: FsUnit 0.9.0 for NUnit: This release is for F# 2.0 and NUnit 2.5+.Laughing Dog XNA Framework: Laughing Dog 0.0.1: Laughing Dog - Alpla - v 0.0.1 First released version of the Laughing Dog framework.LiveUpload to Facebook: LiveUpload to Facebook 3.2: Version 3.2Become a fan on Facebook! Features Quickly and easily upload your photos and videos to Facebook, including any people tags added in Win...MapWindow6: MapWindow 6.0 msi March 26: This version adds the Join feature for creating a new "featureset" with attributes that are joined with attributes from a Excel data label named 'D...Mobile Broadband Logging Monitor: Mobile Broadband Logging Monitor 1.2.2: This edition supports: Newer and older editions of Birdstep Technology's EasyConnect HUAWEI Mobile Partner MWConn User defined location for s...Multiplayer Quiz: Release 1_6_351_0: A beta release of the next version. Please leave any errors in discussions or comments.Native code wrapping using c# : fsutil sparse commands: Fsutil sparse file native code - c sharp wrapper: Project Description A C# code wrapping a native code-Sparse files1 The code is about SPARSE files- the abillity to create huge files (for future us...Nice Libraries: 1.30 build 50325.01: Release 1.30 build 50325.01Pretty Good Frontend: Pretty Good Frontend binaries v1.0: This is the first public release of the Pretty Good Frontend binariesPylor: Pylor 0.1 alpha: This is the very first published version. I hope I can put a sample project soon.Quick Performance Monitor: Version 1.1 refresh: There was a typo or two in the sample batch file. Corrected now.Rapidshare Episode Downloader: RED v0.8.3: 0.8.1 introduced the ability to advance to the next episode. In 0.8.2 a bug was found that if episode number is less then 10, then the preceding 0...RapidWebDev - .NET Enterprise Software Development Infrastructure: RapidWebDev 1.52: RapidWebDev is an infrastructure helps to develop enterprise software solutions in Microsoft .NET easily and productively. This is the release vers...thommo cannon: game: gamethommo cannon: setup: setupthommo cannon: test: testTinare: Tinare DLL: Tinare DLL is a dynamic-link library written in C# which provides the functions to encrypt and decrypt a byte stream with tinare.WeatherBar: WeatherBar 2.1 [No Installation]: Minor changes to release 2.0 (http://weatherbar.codeplex.com/releases/view/42490). Fixed the bug that caused an exception to be thrown if the user...Most Popular ProjectsMetaSharpRawrWBFS ManagerASP.NET Ajax LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsRawrjQuery Library for SharePoint Web ServicesBlogEngine.NETMicrosoft Biology FoundationFarseer Physics Enginepatterns & practices: Composite WPF and SilverlightLINQ to TwitterTable2ClassFluent Ribbon Control SuiteNB_Store - Free DotNetNuke Ecommerce Catalog Module

    Read the article

  • New Features in ASP.NET Web API 2 - Part I

    - by dwahlin
    I’m a big fan of ASP.NET Web API. It provides a quick yet powerful way to build RESTful HTTP services that can easily be consumed by a variety of clients. While it’s simple to get started using, it has a wealth of features such as filters, formatters, and message handlers that can be used to extend it when needed. In this post I’m going to provide a quick walk-through of some of the key new features in version 2. I’ll focus on some two of my favorite features that are related to routing and HTTP responses and cover additional features in a future post.   Attribute Routing Routing has been a core feature of Web API since it’s initial release and something that’s built into new Web API projects out-of-the-box. However, there are a few scenarios where defining routes can be challenging such as nested routes (more on that in a moment) and any situation where a lot of custom routes have to be defined. For this example, let’s assume that you’d like to define the following nested route:   /customers/1/orders   This type of route would select a customer with an Id of 1 and then return all of their orders. Defining this type of route in the standard WebApiConfig class is certainly possible, but it isn’t the easiest thing to do for people who don’t understand routing well. Here’s an example of how the route shown above could be defined:   public static class WebApiConfig { public static void Register(HttpConfiguration config) { config.Routes.MapHttpRoute( name: "CustomerOrdersApiGet", routeTemplate: "api/customers/{custID}/orders", defaults: new { custID = 0, controller = "Customers", action = "Orders" } ); config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); GlobalConfiguration.Configuration.Formatters.Insert(0, new JsonpFormatter()); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   With attribute based routing, defining these types of nested routes is greatly simplified. To get started you first need to make a call to the new MapHttpAttributeRoutes() method in the standard WebApiConfig class (or a custom class that you may have created that defines your routes) as shown next:   public static class WebApiConfig { public static void Register(HttpConfiguration config) { // Allow for attribute based routes config.MapHttpAttributeRoutes(); config.Routes.MapHttpRoute( name: "DefaultApi", routeTemplate: "api/{controller}/{id}", defaults: new { id = RouteParameter.Optional } ); } } Once attribute based routes are configured, you can apply the Route attribute to one or more controller actions. Here’s an example:   [HttpGet] [Route("customers/{custId:int}/orders")] public List<Order> Orders(int custId) { var orders = _Repository.GetOrders(custId); if (orders == null) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return orders; }   This example maps the custId route parameter to the custId parameter in the Orders() method and also ensures that the route parameter is typed as an integer. The Orders() method can be called using the following route: /customers/2/orders   While this is extremely easy to use and gets the job done, it doesn’t include the default “api” string on the front of the route that you might be used to seeing. You could add “api” in front of the route and make it “api/customers/{custId:int}/orders” but then you’d have to repeat that across other attribute-based routes as well. To simply this type of task you can add the RoutePrefix attribute above the controller class as shown next so that “api” (or whatever the custom starting point of your route is) is applied to all attribute routes: [RoutePrefix("api")] public class CustomersController : ApiController { [HttpGet] [Route("customers/{custId:int}/orders")] public List<Order> Orders(int custId) { var orders = _Repository.GetOrders(custId); if (orders == null) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return orders; } }   There’s much more that you can do with attribute-based routing in ASP.NET. Check out the following post by Mike Wasson for more details.   Returning Responses with IHttpActionResult The first version of Web API provided a way to return custom HttpResponseMessage objects which were pretty easy to use overall. However, Web API 2 now wraps some of the functionality available in version 1 to simplify the process even more. A new interface named IHttpActionResult (similar to ActionResult in ASP.NET MVC) has been introduced which can be used as the return type for Web API controller actions. To return a custom response you can use new helper methods exposed through ApiController such as: Ok NotFound Exception Unauthorized BadRequest Conflict Redirect InvalidModelState Here’s an example of how IHttpActionResult and the helper methods can be used to cleanup code. This is the typical way to return a custom HTTP response in version 1:   public HttpResponseMessage Delete(int id) { var status = _Repository.DeleteCustomer(id); if (status) { return new HttpResponseMessage(HttpStatusCode.OK); } else { throw new HttpResponseException(HttpStatusCode.NotFound); } } With version 2 we can replace HttpResponseMessage with IHttpActionResult and simplify the code quite a bit:   public IHttpActionResult Delete(int id) { var status = _Repository.DeleteCustomer(id); if (status) { //return new HttpResponseMessage(HttpStatusCode.OK); return Ok(); } else { //throw new HttpResponseException(HttpStatusCode.NotFound); return NotFound(); } } You can also cleanup post (insert) operations as well using the helper methods. Here’s a version 1 post action:   public HttpResponseMessage Post([FromBody]Customer cust) { var newCust = _Repository.InsertCustomer(cust); if (newCust != null) { var msg = new HttpResponseMessage(HttpStatusCode.Created); msg.Headers.Location = new Uri(Request.RequestUri + newCust.ID.ToString()); return msg; } else { throw new HttpResponseException(HttpStatusCode.Conflict); } } This is what the code looks like in version 2:   public IHttpActionResult Post([FromBody]Customer cust) { var newCust = _Repository.InsertCustomer(cust); if (newCust != null) { return Created<Customer>(Request.RequestUri + newCust.ID.ToString(), newCust); } else { return Conflict(); } } More details on IHttpActionResult and the different helper methods provided by the ApiController base class can be found here. Conclusion Although there are several additional features available in Web API 2 that I could cover (CORS support for example), this post focused on two of my favorites features. If you have .NET 4.5.1 available then I definitely recommend checking the new features out. Additional articles that cover features in ASP.NET Web API 2 can be found here.

    Read the article

  • SQL SERVER – 3 Online SQL Courses at Pluralsight and Free Learning Resources

    - by pinaldave
    Usain Bolt is an inspiration for all. He broke his own record multiple times because he wanted to do better! Read more about him on wikipedia. He is great and indeed fastest man on the planet. Usain Bolt – World’s Fastest Man “Can you teach me SQL Server Performance Tuning?” This is one of the most popular questions which I receive all the time. The answer is YES. I would love to do performance tuning training for anyone, anywhere.  It is my favorite thing to do, and it is my favorite thing to train others in.  If possible, I would love to do training 24 hours a day, 7 days a week, 365 days a year.  To me, it doesn’t feel like a job. Of course, as much as I would love to do performance tuning 24/7/365, obviously I am just one human being and can only be in one place t one time.  It is also very difficult to train more than one person at a time, and it is difficult to train two or more people at a time, especially when the two people are at different levels.  I am also limited by geography.  I live in India, and adjust to my own time zone.  Trying to teach a live course from India to someone whose time zone is 12 or more hours off of mine is very difficult.  If I am trying to teach at 2 am, I am sure I am not at my best! There was only one solution to scale – Online Trainings. I have built 3 different courses on SQL Server Performance Tuning with Pluralsight. Now I have no problem – I am 100% scalable and available 24/7 and 365. You can make me say the same things again and again till you find it right. I am in your mobile, PC as well as on XBOX. This is why I am such a big fan of online courses.  I have recorded many performance tuning classes and you can easily access them online, at your own time.  And don’t think that just because these aren’t live classes you won’t be able to get any feedback from me.  I encourage all my viewers to go ahead and ask me questions by e-mail, Twitter, Facebook, or whatever way you can get a hold of me. Here are details of three of my courses with Pluralsight. I suggest you go over the description of the course. As an author of the course, I have few FREE codes for watching the free courses. Please leave a comment with your valid email address, I will send a few of them to random winners. SQL Server Performance: Introduction to Query Tuning  SQL Server performance tuning is an art to master – for developers and DBAs alike. This course takes a systematic approach to planning, analyzing, debugging and troubleshooting common query-related performance problems. This includes an introduction to understanding execution plans inside SQL Server. In this almost four hour course we cover following important concepts. Introduction 10:22 Execution Plan Basics 45:59 Essential Indexing Techniques 20:19 Query Design for Performance 50:16 Performance Tuning Tools 01:15:14 Tips and Tricks 25:53 Checklist: Performance Tuning 07:13 The duration of each module is mentioned besides the name of the module. SQL Server Performance: Indexing Basics This course teaches you how to master the art of performance tuning SQL Server by better understanding indexes. In this almost two hour course we cover following important concepts. Introduction 02:03 Fundamentals of Indexing 22:21 Practical Indexing Implementation Techniques 37:25 Index Maintenance 16:33 Introduction to ColumnstoreIndex 08:06 Indexing Practical Performance Tips and Tricks 24:56 Checklist : Index and Performance 07:29 The duration of each module is mentioned besides the name of the module. SQL Server Questions and Answers This course is designed to help you better understand how to use SQL Server effectively. The course presents many of the common misconceptions about SQL Server, and then carefully debunks those misconceptions with clear explanations and short but compelling demos, showing you how SQL Server really works. In this almost 2 hours and 15 minutes course we cover following important concepts. Introduction 00:54 Retrieving IDENTITY value using @@IDENTITY 08:38 Concepts Related to Identity Values 04:15 Difference between WHERE and HAVING 05:52 Order in WHERE clause 07:29 Concepts Around Temporary Tables and Table Variables 09:03 Are stored procedures pre-compiled? 05:09 UNIQUE INDEX and NULLs problem 06:40 DELETE VS TRUNCATE 06:07 Locks and Duration of Transactions 15:11 Nested Transaction and Rollback 09:16 Understanding Date/Time Datatypes 07:40 Differences between VARCHAR and NVARCHAR datatypes 06:38 Precedence of DENY and GRANT security permissions 05:29 Identify Blocking Process 06:37 NULLS usage with Dynamic SQL 08:03 Appendix Tips and Tricks with Tools 20:44 The duration of each module is mentioned besides the name of the module. SQL in Sixty Seconds You will have to login and to get subscribed to the courses to view them. Here are my free video learning resources SQL in Sixty Seconds. These are 60 second video which I have built on various subjects related to SQL Server. Do let me know what you think about them? Here are three of my latest videos: Identify Most Resource Intensive Queries – SQL in Sixty Seconds #028 Copy Column Headers from Resultset – SQL in Sixty Seconds #027 Effect of Collation on Resultset – SQL in Sixty Seconds #026 You can watch and learn at your own pace.  Then you can easily ask me any questions you have.  E-mail is easiest, but for really tough questions I’m willing to talk on Skype, Gtalk, or even Facebook chat.  Please do watch and then talk with me, I am always available on the internet! Here is the video of the world’s fastest man.Usain St. Leo Bolt inspires us that we all do better than best. We can go the next level of our own record. We all can improve if we have a will and dedication.  Watch the video from 5:00 mark. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLServer, T SQL, Technology, Video

    Read the article

  • Why do GPUs overheat?

    - by JAD
    About a year ago, I added a 9800GT (1 GB version) and a Corsair CX500 PSU to an HP M8000N computer. A few weeks ago, the HDD overheated and I decided to transfer the GPU & PSU to a new build, which consists of: i3 @ 3.3Ghz Gigabyte H61 Micro ATX Mobo 4GB RAM 500GB WD HDD DVD RW Drive Cooler Master Elite 430 Tower Once I had Win7 up and running, I installed all the essential drivers that came with the Gigabyte Mobo CD. However, whenever I tried installing the Graphics Media Accelerator driver, the computer would crash and enter an endless boot sequence on the next startup. I skipped installing this driver and installed the CD driver for the 9800GT, which by now is a year old. Everything was working fine, WEI rated my GPU at 6.6 graphics & aero performance. However, after updating my Nvidia drivers to the latest, the WEI dropped my rating to 3.3 for Aero, and 4.7 for graphics performance. Just to make sure that everything was ok, I ran Bad Company 2 on medium settings. The first few minutes ran just fine at a smooth framerate, so I dismissed this as Windows being Windows. About 6 hours later, I ran BC2 again. This time I averaged anywhere from 2-5 FPS. I checked the GPU temperature through GPU-Z, and it came back as 120C. The problem with this, is that the computer was on for six hours up to that point. Wouldn't the card have experienced a reactor core meltdown a lot sooner than that? Granted, the computer was "sleeping" some of the time, but still... The next day I took out a temperature gun and ran some tests. I would point the laser at a very specific area on the reverse side of the card (not the fan or "front"), and compare the temp reading with GPU-Z. After leaving the system on idle on idle for a few minutes, I ran BC2 twice. Here are the results: GPU-Z Reading / Temp Gun Reading / Time Null / 22.3°C / Comp is Off 53°C / 33.5°C / 1:49 78°C / 46°C / 1:53 - (First BC2 run; good framerate) 102°C / 64.6°C / 2:01 - (System is again on idle) 113°C / 64.8°C / 2:10 119°C / 71.8°C / 2:17 - (Second BC2 run; poor framerate) I should also mention that I also took a temp recording of another part of the GPU from 2:01-2:17. The temp in this area jumped from 75°C to 82.9°C in that time frame. This pretty much confirms that GPU-Z is reporting the temperature accurately, and the card is overheating. But I'd like to know why; the cars is doing nothing and still the temperature climbs at a steady rate. I thoroughly cleaned the GPU and PSU when I salvaged them from the old HP M8000N computer with a can of compressed air, dust cant be the issue. Similarly, the rest of the computer is brand new. I installed various Nvidia drivers, but no luck. It seems strange to me that a year-old card is suddenly failing on me; aren't they supposed to last at least two years? Could this be a driver issue? Is the motherboard faulty? Could the PSU be overfeeding the card on voltage? Neither case seems likely, as the CPU, RAM and otherwise the rest of the comp has worked flawlessly and has stayed well within respectable temp ranges (the i3 lingers around 50C, the HDD stays at 30C, so does the PSU). How can I pinpoint the issue?

    Read the article

  • Graphics card initialisation problems when booting - requires a "double" boot

    - by DMA57361
    Problem Outline When booting from cold (and my machine is disconnected from main power when off, but leaving it connected doesn't help) the graphics card (single PCI-e card GeForce 460) will not initialise on the first boot, leaving me with the motherboards on-board graphics (which kick in automatically if no PCI-e card is found). However, if I restart the computer - normally I do this by powering it off just after the numlock lights up on the keyboard (ie, just after POST/BIOS and before Windows takes over), wait for the system to whirr down, and power up again - the graphics card will work correctly. Once double-booted in this matter the system seems to work correctly - with no noticeable problems. This is reproducible every time I try to boot - it has been working like this for about a month now. Background Information Sept 2010 - I suffered a hardware malfunction (crashes in Windows and graphics corruption on BIOS screens). By way of spare hardware I determined that replacing the PSU removed the issue, so I replaced the PSU with a brand new one of slightly higher power (460W replaced with 500W). Oct 2010 - The problem resurfaced. I purchased a new graphics card (GeForce 460), which removed the problem. The new graphics card immediately started having the boot initialisation problems mentioned. I presumed there was a motherboard fault all along, but because the system worked once booted, and I was temporarily out of spare money, I left the system alone and continued to use it. Early/Mid Dec 2010 - In the space of 5 days I recieved 3 instances of hard drive corruption (seemlingly fixed by chkdsk and sfc in each case...). Since I was already under the impression the motherboard was faulty, I purchased a new one ASAP, this also required new RAM (as I dropped from 4 slots to 2 and didn't want to drop mem quantity). Past 3-4 weeks - With a brand new PSU, Graphics Card, Motherboard and RAM I'm suffering the problem outlined above. So, what could be causing this and how do I can resolve it? Additional Notes Once double-booted the system seems to work entirely correctly. The graphics card problem has occured on two entirely different motherboards. I do not have the opportunity to test the graphics card in a different computer (I've only the old motherboard, which is dubious, or a really old desktop that still has an AGP port). Under load (ie, modern games for long enough for temperatures to plateau) the system remains stable and performs as expected. The software that came with the new motherboard and SpeenFan both report all voltages and temperatures are within nominal bounds, when idle and when under load. I've looking over the BIOS settings for my motherboard multiple times and can find nothing that helps. This system is configured to run with everything at standard levels - no overclocking. I've tried booting the system with only the mobo and graphics card connected (thinking maybe my new PSU was too weak for the new gfx card, even though it meets the quoted PSU requirements for the card) but the same problem persists (and really if the PSU was weak I'd have problems with the system under load). When the gfx card does not initialise the fan on its cooling unit is running, possibly slower than otherwise - but this measurement is by eye and so unreliable.

    Read the article

  • Diagnosing ADF Mobile iOS deployment problems

    - by Chris Muir
    From time to time I encounter customers who have taken possession of a brand new Apple Mac, have that excited "I've just spent more on a computer then I ever wanted to but it's okay" crazy gleam in their eye, but on pre-loading all the necessary software for Oracle's ADF Mobile to start their mobile campaign, following Oracle's setup instructions and deploying their first app to Apple's XCode iPhone Simulator they hit this error message in the JDeveloper Log-Deployment window: [01:36:46 PM] Deployment cancelled. [01:36:46 PM] ----  Deployment incomplete  ----. [01:36:46 PM] Failed to build the iOS application bundle. [01:36:46 PM] Deployment failed due to one or more errors returned by '/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild'.  The following is a summary of the returned error(s): Command-line execution failed (Return code: 69) "Oh, return code 69, I know that well" I hear you say.  Admittedly the error code is less than useful besides drawing some titters from the peanut gallery. Before explaining what's gone wrong, I think it's useful to teach customers how to diagnose these issues themselves.  When ADF Mobile commences a deployment, be it to Apple's iOS or Google's Android platforms, JDeveloper and ADF Mobile do a good job in the Log window of showing you what the deployment process entails.  In the case of deploying to iOS the log window will literally include the XCode commands executed to complete the deployment cycle. As example here's the log output that was produced before the error message was raised.... take the opportunity to read this line by line and note the command line calls highlighted in blue: (Note some of the following lines have been split over multiple lines to suit reading on this blog, each original line is preceded by a timestamp. Ensure to check the exact commands from JDev) [01:36:33 PM] Target platform is (iOS). [01:36:33 PM] Beginning deployment of ADF Mobile application 'LayoutDemo' to iOS using profile 'IOS_MOBILE_NATIVE_archive1'. [01:36:34 PM] Command-line executed: [/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild, -version] [01:36:34 PM] Command-line execution succeeded. [01:36:34 PM] Running dependency analysis... [01:36:34 PM] Building... [01:36:34 PM] Deploying 3 profiles... [01:36:35 PM] Wrote Archive Module to /Users/chris/fmw/jdeveloper/jdev/extensions/ oracle.adf.mobile/Samples/PublicSamples/LayoutDemo/ApplicationController/ deploy/ApplicationController.jar [01:36:35 PM] WARNING: No Resource Catalog enabled ADF components found to package [01:36:36 PM] Wrote Archive Module to /Users/chris/fmw/jdeveloper/jdev/extensions/ oracle.adf.mobile/Samples/PublicSamples/LayoutDemo/ViewController/ deploy/ViewController.jar [01:36:36 PM] Verifying existence of the .adf source directory of the ADF Mobile application... [01:36:36 PM] Verifying Application Controller project exists... [01:36:36 PM] Verifying application dependencies... [01:36:36 PM] The application may not function correctly because the following dependent libraries are missing: /Users/chris/jdev/jdeveloper/jdeveloper/jdev/extensions/oracle.adf.mobile/ lib/adfmf.springboard.jar [01:36:36 PM] Verifying project dependencies... [01:36:36 PM] Validating application XML files... [01:36:36 PM] Validating XML files in project ApplicationController... [01:36:36 PM] Validating XML files in project ViewController... [01:36:40 PM] Copying common javascript files... [01:36:41 PM] Copying FARs to the ADF Mobile Framework application... [01:36:41 PM] Extracting Feature Archive file, "ApplicationController.jar" to deployment folder, "ApplicationController". [01:36:42 PM] Extracting Feature Archive file, "ViewController.jar" to deployment folder, "ViewController". [01:36:42 PM] Deploying skinning files... [01:36:43 PM] Copying the CVM SDK files built for the x86 processor... [01:36:43 PM] Copying the CVM JDK files built for the x86 processor... [01:36:43 PM] Command-line executed: [cp, -R, -p, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/x86/, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/ Samples/PublicSamples/ LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/temporary_xcode_project/lib] [01:36:43 PM] Command-line execution succeeded. [01:36:43 PM] Command-line executed: [cp, -R, -p, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/jar/, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/ temporary_xcode_project/lib] [01:36:43 PM] Command-line execution succeeded. [01:36:43 PM] Copying security related files to the ADF Mobile Framework application... [01:36:44 PM] Command-line executed from path: /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/temporary_xcode_project/ [01:36:44 PM] Command-line executed: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild clean install -configuration Debug -sdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/ Developer/SDKs/iPhoneSimulator6.1.sdk DSTROOT=/Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/Destination_Root/ IPHONEOS_DEPLOYMENT_TARGET=5.0 TARGETED_DEVICE_FAMILY=1,2 PRODUCT_NAME=LayoutDemo ADD_SETTINGS_BUNDLE=NO As you can see when we move from JDeveloper undertaking its work, it then passes the code off in the last few lines for Apple's XCode to assemble and deploy the required .ipa file.  From the original error message which followed this complaining about xcodebuild failing with return code 69, we can quickly see the exact command line used to call xcodebuild. As this is the exact command line call with all its options, you're free to open a Terminal window in Mac OSX and execute the same command by simply copying and pasting the command line. And via this you'll then find out what return code actually 69 means.  Unfortunately it's not that exciting. For Macs that have just been installed and configured with XCode, XCode (and for that matter iTunes) which is required by ADF Mobile to deploy must have been run at least once before hand on your brand new Mac (to be clear that's once ever, not once every restart). On doing so you will be presented with a license agreement from Apple that you must accept. Only once you've done this will the command line calls work.  They're currently failing as you haven't accepted the legal terms and conditions. (arguably you an also accept the terms and conditions from the command line too, but ADF Mobile cannot do this on your behalf, so it's just easier to open the tools and confirm the legal requirements that way). Putting aside the error code and its meaning, watching the log window, watching what commands are executed, learning what they do, this will assist you to diagnose issues yourself and solve these sort of issues more relatively quickly.  From my perspective as an Oracle Product Manager, it allows me to say "this is the stuff you don't need to worry about when you use ADF Mobile when it's configured correctly" .... as you can see my salesman qualities shine through. For anyone who is happily using ADF Mobile on a Mac and wondering why you didn't hit these issues, it's quite likely that you already accepted the license conditions before deploying via ADF Mobile.  For instance, though I'm not a fan of iTunes itself, iTunes was one of the first things I loaded on my Mac to access my Justin Bieber albums. Image courtesy of winnond / FreeDigitalPhotos.net

    Read the article

  • C#: Does an IDisposable in a Halted Iterator Dispose?

    - by James Michael Hare
    If that sounds confusing, let me give you an example. Let's say you expose a method to read a database of products, and instead of returning a List<Product> you return an IEnumerable<Product> in iterator form (yield return). This accomplishes several good things: The IDataReader is not passed out of the Data Access Layer which prevents abstraction leak and resource leak potentials. You don't need to construct a full List<Product> in memory (which could be very big) if you just want to forward iterate once. If you only want to consume up to a certain point in the list, you won't incur the database cost of looking up the other items. This could give us an example like: 1: // a sample data access object class to do standard CRUD operations. 2: public class ProductDao 3: { 4: private DbProviderFactory _factory = SqlClientFactory.Instance 5:  6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: // must create the connection 10: using (var con = _factory.CreateConnection()) 11: { 12: con.ConnectionString = _productsConnectionString; 13: con.Open(); 14:  15: // create the command 16: using (var cmd = _factory.CreateCommand()) 17: { 18: cmd.Connection = con; 19: cmd.CommandText = _getAllProductsStoredProc; 20: cmd.CommandType = CommandType.StoredProcedure; 21:  22: // get a reader and pass back all results 23: using (var reader = cmd.ExecuteReader()) 24: { 25: while(reader.Read()) 26: { 27: yield return new Product 28: { 29: Name = reader["product_name"].ToString(), 30: ... 31: }; 32: } 33: } 34: } 35: } 36: } 37: } The database details themselves are irrelevant. I will say, though, that I'm a big fan of using the System.Data.Common classes instead of your provider specific counterparts directly (SqlCommand, OracleCommand, etc). This lets you mock your data sources easily in unit testing and also allows you to swap out your provider in one line of code. In fact, one of the shared components I'm most proud of implementing was our group's DatabaseUtility library that simplifies all the database access above into one line of code in a thread-safe and provider-neutral way. I went with my own flavor instead of the EL due to the fact I didn't want to force internal company consumers to use the EL if they didn't want to, and it made it easy to allow them to mock their database for unit testing by providing a MockCommand, MockConnection, etc that followed the System.Data.Common model. One of these days I'll blog on that if anyone's interested. Regardless, you often have situations like the above where you are consuming and iterating through a resource that must be closed once you are finished iterating. For the reasons stated above, I didn't want to return IDataReader (that would force them to remember to Dispose it), and I didn't want to return List<Product> (that would force them to hold all products in memory) -- but the first time I wrote this, I was worried. What if you never consume the last item and exit the loop? Are the reader, command, and connection all disposed correctly? Of course, I was 99.999999% sure the creators of C# had already thought of this and taken care of it, but inspection in Reflector was difficult due to the nature of the state machines yield return generates, so I decided to try a quick example program to verify whether or not Dispose() will be called when an iterator is broken from outside the iterator itself -- i.e. before the iterator reports there are no more items. So I wrote a quick Sequencer class with a Dispose() method and an iterator for it. Yes, it is COMPLETELY contrived: 1: // A disposable sequence of int -- yes this is completely contrived... 2: internal class Sequencer : IDisposable 3: { 4: private int _i = 0; 5: private readonly object _mutex = new object(); 6:  7: // Constructs an int sequence. 8: public Sequencer(int start) 9: { 10: _i = start; 11: } 12:  13: // Gets the next integer 14: public int GetNext() 15: { 16: lock (_mutex) 17: { 18: return _i++; 19: } 20: } 21:  22: // Dispose the sequence of integers. 23: public void Dispose() 24: { 25: // force output immediately (flush the buffer) 26: Console.WriteLine("Disposed with last sequence number of {0}!", _i); 27: Console.Out.Flush(); 28: } 29: } And then I created a generator (infinite-loop iterator) that did the using block for auto-Disposal: 1: // simply defines an extension method off of an int to start a sequence 2: public static class SequencerExtensions 3: { 4: // generates an infinite sequence starting at the specified number 5: public static IEnumerable<int> GetSequence(this int starter) 6: { 7: // note the using here, will call Dispose() when block terminated. 8: using (var seq = new Sequencer(starter)) 9: { 10: // infinite loop on this generator, means must be bounded by caller! 11: while(true) 12: { 13: yield return seq.GetNext(); 14: } 15: } 16: } 17: } This is really the same conundrum as the database problem originally posed. Here we are using iteration (yield return) over a large collection (infinite sequence of integers). If we cut the sequence short by breaking iteration, will that using block exit and hence, Dispose be called? Well, let's see: 1: // The test program class 2: public class IteratorTest 3: { 4: // The main test method. 5: public static void Main() 6: { 7: Console.WriteLine("Going to consume 10 of infinite items"); 8: Console.Out.Flush(); 9:  10: foreach(var i in 0.GetSequence()) 11: { 12: // could use TakeWhile, but wanted to output right at break... 13: if(i >= 10) 14: { 15: Console.WriteLine("Breaking now!"); 16: Console.Out.Flush(); 17: break; 18: } 19:  20: Console.WriteLine(i); 21: Console.Out.Flush(); 22: } 23:  24: Console.WriteLine("Done with loop."); 25: Console.Out.Flush(); 26: } 27: } So, what do we see? Do we see the "Disposed" message from our dispose, or did the Dispose get skipped because from an "eyeball" perspective we should be locked in that infinite generator loop? Here's the results: 1: Going to consume 10 of infinite items 2: 0 3: 1 4: 2 5: 3 6: 4 7: 5 8: 6 9: 7 10: 8 11: 9 12: Breaking now! 13: Disposed with last sequence number of 11! 14: Done with loop. Yes indeed, when we break the loop, the state machine that C# generates for yield iterate exits the iteration through the using blocks and auto-disposes the IDisposable correctly. I must admit, though, the first time I wrote one, I began to wonder and that led to this test. If you've never seen iterators before (I wrote a previous entry here) the infinite loop may throw you, but you have to keep in mind it is not a linear piece of code, that every time you hit a "yield return" it cedes control back to the state machine generated for the iterator. And this state machine, I'm happy to say, is smart enough to clean up the using blocks correctly. I suspected those wily guys and gals at Microsoft engineered it well, and I wasn't disappointed. But, I've been bitten by assumptions before, so it's good to test and see. Yes, maybe you knew it would or figured it would, but isn't it nice to know? And as those campy 80s G.I. Joe cartoon public service reminders always taught us, "Knowing is half the battle...". Technorati Tags: C#,.NET

    Read the article

  • BSOD & System Failure after trying to install a new RAM

    - by Praveen Kumar
    I have updated the question with sections, so that people won't find it difficult to read. Basic System Information Let me give a basic introduction on my system. I have a system of following configuration: Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz 3.40GHz RAM: Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9) x 2 OS: Windows 7 Ultimate, SP1 Build 7601 HDD: 1 TB Seagate 7200 RPM The Problem It was working fine for about an year. Yesterday I planned to increase my RAM to 16 GB by putting another set of two Corsair Vengeance - 4GB Single Module DDR3 Memory Kit (CMZ4GX3M1A1600C9). I got it from an authorized reseller and also, the RAM was fitted by a service engineer only. After the RAM was fit (all the four), the system failed to start, with an error code of 0x000000f4. The complete information of it is: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: f4 BCP1: 0000000000000003 BCP2: FFFFFA8008A39060 BCP3: FFFFFA8008A39340 BCP4: FFFFF800037C8510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\093012-13041-01.dmp C:\Users\Praveen Kumar\AppData\Local\Temp\WER-30716-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Another Problem We first thought that it was the RAM, which caused the issue. So I returned the RAMs and now my computer configuration is exactly how it was the previous day. But, following the removal of the RAM, I also had several crashes after that. One suspicious thing was with an error code c0000134: STOP: c0000135 The program can’t start because %hs is missing from your computer . Try resintalling the program to fix this problem. After reading contents from this, this and this, which were never my case, they didn't help me. But I didn't receive any more STOP c0000134 messages. But this 0x000000f4 keeps on coming. I am writing from the same system and it allows me to work for say, half an hour max. Then I hear a device disconnect sound, the one you hear in Windows 7, when a USB Mass Storage Device is plugged out. Immediately following that, my screen goes blank and I get 0x000000f4 blue screen. Okay, now I am really concerned about my Hard Disk data, but I have no clue if there is a problem with the HDD. My Question What all files do I need to submit for your reference? Can this issue be fixed? I am getting more time if I remove my RAM, clean it and then put it back. Weird! Hope I have given the necessary information to help you guys. Thanks in advance. Minidumps I have uploaded all the Minidump DMP files from C:\Windows\Minidump folder here: http://www.praveen-kumar.com/Minidumps.zip Let me know if you face any issues in accessing it. Will be able to share elsewhere. Updates 30-Sep-2012 10:15 AM IST: When I keep the system cover opened, pressed the HDD Cable well, it is allowing me to be on for about half an hour, I guess? Also, I feel that the CPU fan speed is kind of slow. It rotates at around 900 RPM, but the CPU Temperature is not more than 70° C. 30-Sep-2012 10:30 AM IST: My Modem (Beetel 220BX ADSL2+ Router) failed. I have no idea how it is related to this issue, but I thought that I need to document this too. I really have a bad day here. 30-Sep-2012 11:00 AM IST: System still running fine, with the cabinet cover open, now for about an hour. 30-Sep-2012 12:00 PM IST: I shut down the system and closed the cabinet. Started the system, and it hung after giving the password. After a few minutes, got the same 0x000000f4 error. So, while it is in the upright position, fixed the Hard Disk cable and now it is booting fine. Waiting for more observations and answers.

    Read the article

  • Microsoft and the open source community

    - by Charles Young
    For the last decade, I have repeatedly, in my imitable Microsoft fan boy style, offered an alternative view to commonly held beliefs about Microsoft's stance on open source licensing.  In earlier times, leading figures in Microsoft were very vocal in resisting the idea that commercial licensing is outmoded or morally reprehensible.  Many people interpreted this as all-out corporate opposition to open source licensing.  I never read it that way. It is true that I've met individual employees of Microsoft who are antagonistic towards FOSS (free and open source software), but I've met more who are supportive or at least neutral on the subject.  In any case, individual attitudes of employees don't necessarily reflect a corporate stance.  The strongest opposition I've encountered has actually come from outside the company.  It's not a charitable thought, but I sometimes wonder if there are people in the .NET community who are opposed to FOSS simply because they believe, erroneously, that Microsoft is opposed. Here, for what it is worth, are the points I've repeated endlessly over the years and which have often been received with quizzical scepticism. a)  A decade ago, Microsoft's big problem was not FOSS per se, or even with copyleft.  The thing which really kept them awake at night was the fear that one day, someone might find, deep in the heart of the Windows code base, some code that should not be there and which was published under GPL.  The likelihood of this ever happening has long since faded away, but there was a time when MS was running scared.  I suspect this is why they held out for a while from making Windows source code open to inspection.  Nowadays, as an MVP, I am positively encouraged to ask to see Windows source. b)  Microsoft has never opposed the open source community.  They have had problems with specific people and organisations in the FOSS community.  Back in the 1990s, Richard Stallman gave time and energy to a successful campaign to launch antitrust proceedings against Microsoft.  In more recent times, the negative attitude of certain people to Microsoft's submission of two FOSS licences to the OSI (both of which have long since been accepted), and the mad scramble to try to find any argument, however tenuous, to block their submission was not, let us say, edifying. c) Microsoft has never, to my knowledge, written off the FOSS model.  They certainly don't agree that more traditional forms of licensing are inappropriate or immoral, and they've always been prepared to say so.  One reason why it was so hard to convince people that Microsoft is not rabidly antagonistic towards FOSS licensing is that so many people think they have no involvement in open source.  A decade ago, there was virtually no evidence of any such involvement.  However, that was a long time ago.  Quietly over the years, Microsoft has got on with the job of working out how to make use of FOSS licensing and how to support the FOSS community.  For example, as well as making increasingly extensive use of Github, they run an important FOSS forge (CodePlex) on which they, themselves, host many hundreds of distinct projects.  The total count may even be in the thousands now.  I suspect there is a limit of about 500 records on CodePlex searches because, for the past few years, whenever I search for Microsoft-specific projects on CodePlex, I always get approx. 500 hits.  Admittedly, a large volume of the stuff they publish under FOSS licences amounts to code samples, but many of those 'samples' have grown into useful and fully featured frameworks, libraries and tools. All this is leading up to the observation that yesterday's announcement by Scott Guthrie marks a significant milestone and should not go unnoticed.  If you missed it, let me summarise.   From the first release of .NET, Microsoft has offered a web development framework called ASP.NET.  The core libraries are included in the .NET framework which is released free of charge, but which is not open source.   However, in recent years, the number of libraries that constitute ASP.NET have grown considerably.  Today, most professional ASP.NET web development exploits the ASP.NET MVC framework.  This, together with several other important parts of the ASP.NET technology stack, is released on CodePlex under the Apache 2.0 licence.   Hence, today, a huge swathe of web development on the .NET/Azure platform relies four-square on the use of FOSS frameworks and libraries. Yesterday, Scott Guthrie announced the next stage of ASP.NET's journey towards FOSS nirvana.  This involves extending ASP.NET's FOSS stack to include Web API and the MVC Razor view engine which is rapidly becoming the de facto 'standard' for building web pages in ASP.NET.  However, perhaps the more important announcement is that the ASP.NET team will now accept and review contributions from the community.  Scott points out that this model is already in place elsewhere in Microsoft, and specifically draws attention to development of the Windows Azure SDKs.  These SDKs are central to Azure development.   The .NET and Java SDKs are published under Apache 2.0 on Github and Microsoft is open to community contributions.  Accepting contributions is a more profound move than simply releasing code under FOSS licensing.  It means that Microsoft is wholeheartedly moving towards a full-blooded open source approach for future evolution of some of their central and most widely used .NET and Azure frameworks and libraries.  In conjunction with Scott's announcement, Microsoft has also released Git support for CodePlex (at long last!) and, perhaps more importantly, announced significant new investment in their own FOSS forge. Here at Solidsoft we have several reasons to be very interested in Scott's announcement. I'll draw attention to one of them.  Earlier this year we wrote the initial version of a new UK Government web application called CloudStore.  CloudStore provides a way for local and central government to discover and purchase applications and services. We wrote the web site using ASP.NET MVC which is FOSS.  However, this point has been lost on the ladies and gentlemen of the press and, I suspect, on some of the decision makers on the government side.  They announced a few weeks ago that future versions of CloudStore will move to a FOSS framework, clearly oblivious of the fact that it is already built on a FOSS framework.  We are, it is fair to say, mildly irked by the uninformed and badly out-of-date assumption that “if it is Microsoft, it can't be FOSS”.  Old prejudices live on.

    Read the article

  • ANTS Memory Profiler 7.0

    - by James Michael Hare
    I had always been a fan of ANTS products (Reflector is absolutely invaluable, and their performance profiler is great as well – very easy to use!), so I was curious to see what the ANTS Memory Profiler could show me. Background While a performance profiler will track how much time is typically spent in each unit of code, a memory profiler gives you much more detail on how and where your memory is being consumed and released in a program. As an example, I’d been working on a data access layer at work to call a market data web service.  This web service would take a list of symbols to quote and would return back the quote data.  To help consolidate the thousands of web requests per second we get and reduce load on the web services, we implemented a 5-second cache of quote data.  Not quite long enough to where customers will typically notice a quote go “stale”, but just long enough to be able to collapse multiple quote requests for the same symbol in a short period of time. A 5-second cache may not sound like much, but it actually pays off by saving us roughly 42% of our web service calls, while still providing relatively up-to-date information.  The question is whether or not the extra memory involved in maintaining the cache was worth it, so I decided to fire up the ANTS Memory Profiler and take a look at memory usage. First Impressions The main thing I’ve always loved about the ANTS tools is their ease of use.  Pretty much everything is right there in front of you in a way that makes it easy for you to find what you need with little digging required.  I’ve worked with other, older profilers before (that shall remain nameless other than to hint it was created by a very large chip maker) where it was a mind boggling experience to figure out how to do simple tasks. Not so with AMP.  The opening dialog is very straightforward.  You can choose from here whether to debug an executable, a web application (either in IIS or from VS’s web development server), windows services, etc. So I chose a .NET Executable and navigated to the build location of my test harness.  Then began profiling. At this point while the application is running, you can see a chart of the memory as it ebbs and wanes with allocations and collections.  At any given point in time, you can take snapshots (to compare states) zoom in, or choose to stop at any time.  Snapshots Taking a snapshot also gives you a breakdown of the managed memory heaps for each generation so you get an idea how many objects are staying around for extended periods of time (as an object lives and survives collections, it gets promoted into higher generations where collection becomes less frequent). Generating a snapshot brings up an analysis view with very handy graphs that show your generation sizes.  Almost all my memory is in Generation 1 in the managed memory component of the first graph, which is good news to me, because Gen 2 collections are much rarer.  I once3 made the mistake once of caching data for 30 minutes and found it didn’t get collected very quick after I released my reference because it had been promoted to Gen 2 – doh! Analysis It looks like (from the second pie chart) that the majority of the allocations were in the string class.  This also is expected for me because the majority of the memory allocated is in the web service responses, so it doesn’t seem the entities I’m adapting to (to prevent being too tightly coupled to the web service proxy classes, which can change easily out from under me) aren’t taking a significant portion of memory. I also appreciate that they have clear summary text in key places such as “No issues with large object heap fragmentation were detected”.  For novice users, this type of summary information can be critical to getting them to use a tool and develop a good working knowledge of it. There is also a handy link at the bottom for “What to look for on the summary” which loads a web page of help on key points to look for. Clicking over to the session overview, it’s easy to compare the samples at each snapshot to see how your memory is growing, shrinking, or staying relatively the same.  Looking at my snapshots, I’m pretty happy with the fact that memory allocation and heap size seems to be fairly stable and in control: Once again, you can check on the large object heap, generation one heap, and generation two heap across each snapshot to spot trends. Back on the analysis tab, we can go to the [Class List] button to get an idea what classes are making up the majority of our memory usage.  As was little surprise to me, System.String was the clear majority of my allocations, though I found it surprising that the System.Reflection.RuntimeMehtodInfo came in second.  I was curious about this, so I selected it and went into the [Instance Categorizer].  This view let me see where these instances to RuntimeMehtodInfo were coming from. So I scrolled back through the graph, and discovered that these were being held by the System.ServiceModel.ChannelFactoryRefCache and I was satisfied this was just an artifact of my WCF proxy. I also like that down at the bottom of the Instance Categorizer it gives you a series of filters and offers to guide you on which filter to use based on the problem you are trying to find.  For example, if I suspected a memory leak, I might try to filter for survivors in growing classes.  This means that for instances of a class that are growing in memory (more are being created than cleaned up), which ones are survivors (not collected) from garbage collection.  This might allow me to drill down and find places where I’m holding onto references by mistake and not freeing them! Finally, if you want to really see all your instances and who is holding onto them (preventing collection), you can go to the “Instance Retention Graph” which creates a graph showing what references are being held in memory and who is holding onto them. Visual Studio Integration Of course, VS has its own profiler built in – and for a free bundled profiler it is quite capable – but AMP gives a much cleaner and easier-to-use experience, and when you install it you also get the option of letting it integrate directly into VS. So once you go back into VS after installation, you’ll notice an ANTS menu which lets you launch the ANTS profiler directly from Visual Studio.   Clicking on one of these options fires up the project in the profiler immediately, allowing you to get right in.  It doesn’t integrate with the Visual Studio windows themselves (like the VS profiler does), but still the plethora of information it provides and the clear and concise manner in which it presents it makes it well worth it. Summary If you like the ANTS series of tools, you shouldn’t be disappointed with the ANTS Memory Profiler.  It was so easy to use that I was able to jump in with very little product knowledge and get the information I was looking it for. I’ve used other profilers before that came with 3-inch thick tomes that you had to read in order to get anywhere with the tool, and this one is not like that at all.  It’s built for your everyday developer to get in and find their problems quickly, and I like that! Tweet Technorati Tags: Influencers,ANTS,Memory,Profiler

    Read the article

  • Das T5-4 TPC-H Ergebnis naeher betrachtet

    - by Stefan Hinker
    Inzwischen haben vermutlich viele das neue TPC-H Ergebnis der SPARC T5-4 gesehen, das am 7. Juni bei der TPC eingereicht wurde.  Die wesentlichen Punkte dieses Benchmarks wurden wie gewohnt bereits von unserer Benchmark-Truppe auf  "BestPerf" zusammengefasst.  Es gibt aber noch einiges mehr, das eine naehere Betrachtung lohnt. Skalierbarkeit Das TPC raet von einem Vergleich von TPC-H Ergebnissen in unterschiedlichen Groessenklassen ab.  Aber auch innerhalb der 3000GB-Klasse ist es interessant: SPARC T4-4 mit 4 CPUs (32 Cores mit 3.0 GHz) liefert 205,792 QphH. SPARC T5-4 mit 4 CPUs (64 Cores mit 3.6 GHz) liefert 409,721 QphH. Das heisst, es fehlen lediglich 1863 QphH oder 0.45% zu 100% Skalierbarkeit, wenn man davon ausgeht, dass die doppelte Anzahl Kerne das doppelte Ergebnis liefern sollte.  Etwas anspruchsvoller, koennte man natuerlich auch einen Faktor von 2.4 erwarten, wenn man die hoehere Taktrate mit beruecksichtigt.  Das wuerde die Latte auf 493901 QphH legen.  Dann waere die SPARC T5-4 bei 83%.  Damit stellt sich die Frage: Was hat hier nicht skaliert?  Vermutlich der Plattenspeicher!  Auch hier lohnt sich eine naehere Betrachtung: Plattenspeicher Im Bericht auf BestPerf und auch im Full Disclosure Report der TPC stehen einige interessante Details zum Plattenspeicher und der Konfiguration.   In der Konfiguration der SPARC T4-4 wurden 12 2540-M2 Arrays verwendet, die jeweils ca. 1.5 GB/s Durchsatz liefert, insgesamt also eta 18 GB/s.  Dabei waren die Arrays offensichtlich mit jeweils 2 Kabeln pro Array direkt an die 24 8GBit FC-Ports des Servers angeschlossen.  Mit den 2x 8GBit Ports pro Array koennte man so ein theoretisches Maximum von 2GB/s erreichen.  Tatsaechlich wurden 1.5GB/s geliefert, was so ziemlich dem realistischen Maximum entsprechen duerfte. Fuer den Lauf mit der SPARC T5-4 wurden doppelt so viele Platten verwendet.  Dafuer wurden die 2540-M2 Arrays mit je einem zusaetzlichen Plattentray erweitert.  Mit dieser Konfiguration wurde dann (laut BestPerf) ein Maximaldurchsatz von 33 GB/s erreicht - nicht ganz das doppelte des SPARC T4-4 Laufs.  Um tatsaechlich den doppelten Durchsatz (36 GB/s) zu liefern, haette jedes der 12 Arrays 3 GB/s ueber seine 4 8GBit Ports liefern muessen.  Im FDR stehen nur 12 dual-port FC HBAs, was die Verwendung der Brocade FC Switches erklaert: Es wurden alle 4 8GBit ports jedes Arrays an die Switches angeschlossen, die die Datenstroeme dann in die 24 16GBit HBA ports des Servers buendelten.  Das theoretische Maximum jedes Storage-Arrays waere nun 4 GB/s.  Wenn man jedoch den Protokoll- und "Realitaets"-Overhead mit einrechnet, sind die tatsaechlich gelieferten 2.75 GB/s gar nicht schlecht.  Mit diesen Zahlen im Hinterkopf ist die Verdopplung des SPARC T4-4 Ergebnisses eine gute Leistung - und gleichzeitig eine gute Erklaerung, warum nicht bis zum 2.4-fachen skaliert wurde. Nebenbei bemerkt: Weder die SPARC T4-4 noch die SPARC T5-4 hatten in der gemessenen Konfiguration irgendwelche Flash-Devices. Mitbewerb Seit die T4 Systeme auf dem Markt sind, bemuehen sich unsere Mitbewerber redlich darum, ueberall den Eindruck zu hinterlassen, die Leistung des SPARC CPU-Kerns waere weiterhin mangelhaft.  Auch scheinen sie ueberzeugt zu sein, dass (ueber)grosse Caches und hohe Taktraten die einzigen Schluessel zu echter Server Performance seien.  Wenn ich mir nun jedoch die oeffentlichen TPC-H Ergebnisse ansehe, sehe ich dies: TPC-H @3000GB, Non-Clustered Systems System QphH SPARC T5-4 3.6 GHz SPARC T5 4/64 – 2048 GB 409,721.8 SPARC T4-4 3.0 GHz SPARC T4 4/32 – 1024 GB 205,792.0 IBM Power 780 4.1 GHz POWER7 8/32 – 1024 GB 192,001.1 HP ProLiant DL980 G7 2.27 GHz Intel Xeon X7560 8/64 – 512 GB 162,601.7 Kurz zusammengefasst: Mit 32 Kernen (mit 3 GHz und 4MB L3 Cache), liefert die SPARC T4-4 mehr QphH@3000GB ab als IBM mit ihrer 32 Kern Power7 (bei 4.1 GHz und 32MB L3 Cache) und auch mehr als HP mit einem 64 Kern Intel Xeon System (2.27 GHz und 24MB L3 Cache).  Ich frage mich, wo genau SPARC hier mangelhaft ist? Nun koennte man natuerlich argumentieren, dass beide Ergebnisse nicht gerade neu sind.  Nun, in Ermangelung neuerer Ergebnisse kann man ja mal ein wenig spekulieren: IBMs aktueller Performance Report listet die o.g. IBM Power 780 mit einem rPerf Wert von 425.5.  Ein passendes Nachfolgesystem mit Power7+ CPUs waere die Power 780+ mit 64 Kernen, verfuegbar mit 3.72 GHz.  Sie wird mit einem rPerf Wert von  690.1 angegeben, also 1.62x mehr.  Wenn man also annimmt, dass Plattenspeicher nicht der limitierende Faktor ist (IBM hat mit 177 SSDs getestet, sie duerfen das gerne auf 400 erhoehen) und IBMs eigene Leistungsabschaetzung zugrunde legt, darf man ein theoretisches Ergebnis von 311398 QphH@3000GB erwarten.  Das waere dann allerdings immer noch weit von dem Ergebnis der SPARC T5-4 entfernt, und gerade in der von IBM so geschaetzen "per core" Metric noch weniger vorteilhaft. In der x86-Welt sieht es nicht besser aus.  Leider gibt es von Intel keine so praktischen rPerf-Tabellen.  Daher muss ich hier fuer eine Schaetzung auf SPECint_rate2006 zurueckgreifen.  (Ich bin kein grosser Fan von solchen Kreuz- und Querschaetzungen.  Insb. SPECcpu ist nicht besonders geeignet, um Datenbank-Leistung abzuschaetzen, da fast kein IO im Spiel ist.)  Das o.g. HP System wird bei SPEC mit 1580 CINT2006_rate gelistet.  Das bis einschl. 2013-06-14 beste Resultat fuer den neuen Intel Xeon E7-4870 mit 8 CPUs ist 2180 CINT2006_rate.  Das ist immerhin 1.38x besser.  (Wenn man nur die Taktrate beruecksichtigen wuerde, waere man bei 1.32x.)  Hier weiter zu rechnen, ist muessig, aber fuer die ungeduldigen Leser hier eine kleine tabellarische Zusammenfassung: TPC-H @3000GB Performance Spekulationen System QphH* Verbesserung gegenueber der frueheren Generation SPARC T4-4 32 cores SPARC T4 205,792 2x SPARC T5-464 cores SPARC T5 409,721 IBM Power 780 32 cores Power7 192,001 1.62x IBM Power 780+ 64 cores Power7+  311,398* HP ProLiant DL980 G764 cores Intel Xeon X7560 162,601 1.38x HP ProLiant DL980 G780 cores Intel Xeon E7-4870    224,348* * Keine echten Resultate  - spekulative Werte auf der Grundlage von rPerf (Power7+) oder SPECint_rate2006 (HP) Natuerlich sind IBM oder HP herzlich eingeladen, diese Werte zu widerlegen.  Aber stand heute warte ich noch auf aktuelle Benchmark Veroffentlichungen in diesem Datensegment. Was koennen wir also zusammenfassen? Es gibt einige Hinweise, dass der Plattenspeicher der begrenzende Faktor war, der die SPARC T5-4 daran hinderte, auf jenseits von 2x zu skalieren Der Mythos, dass SPARC Kerne keine Leistung bringen, ist genau das - ein Mythos.  Wie sieht es umgekehrt eigentlich mit einem TPC-H Ergebnis fuer die Power7+ aus? Cache ist nicht der magische Performance-Schalter, fuer den ihn manche Leute offenbar halten. Ein System, eine CPU-Architektur und ein Betriebsystem jenseits einer gewissen Grenze zu skalieren ist schwer.  In der x86-Welt scheint es noch ein wenig schwerer zu sein. Was fehlt?  Nun, das Thema Preis/Leistung ueberlasse ich gerne den Verkaeufern ;-) Und zu guter Letzt: Nein, ich habe mich nicht ins Marketing versetzen lassen.  Aber manchmal kann ich mich einfach nicht zurueckhalten... Disclosure Statements The views expressed on this blog are my own and do not necessarily reflect the views of Oracle. TPC-H, QphH, $/QphH are trademarks of Transaction Processing Performance Council (TPC). For more information, see www.tpc.org, results as of 6/7/13. Prices are in USD. SPARC T5-4 409,721.8 QphH@3000GB, $3.94/QphH@3000GB, available 9/24/13, 4 processors, 64 cores, 512 threads; SPARC T4-4 205,792.0 QphH@3000GB, $4.10/QphH@3000GB, available 5/31/12, 4 processors, 32 cores, 256 threads; IBM Power 780 QphH@3000GB, 192,001.1 QphH@3000GB, $6.37/QphH@3000GB, available 11/30/11, 8 processors, 32 cores, 128 threads; HP ProLiant DL980 G7 162,601.7 QphH@3000GB, $2.68/QphH@3000GB available 10/13/10, 8 processors, 64 cores, 128 threads. SPEC and the benchmark names SPECfp and SPECint are registered trademarks of the Standard Performance Evaluation Corporation. Results as of June 18, 2013 from www.spec.org. HP ProLiant DL980 G7 (2.27 GHz, Intel Xeon X7560): 1580 SPECint_rate2006; HP ProLiant DL980 G7 (2.4 GHz, Intel Xeon E7-4870): 2180 SPECint_rate2006,

    Read the article

  • SQL Sentry First Impressions

    - by AjarnMark
    After struggling to defend my SQL Servers from a political attack recently, I realized that I needed better tools to back me up, and SQL Sentry is the leading candidate. A couple of weeks ago, seemingly from out of nowhere, complaints from the business users started coming in that one of the core internal applications was running dramatically slower than normal, and fingers were being pointed at the SQL Server.  Unfortunately, we don’t have a production DBA whose entire job is to monitor and maintain our SQL Servers.  The responsibility falls to me to do the best I can, investing only a small portion of my time, because there are so many other responsibilities to take care of, and our industry is still deep in recession.  I inherited these SQL Servers and have made significant improvements in process and procedure, but I had not yet made the time to take real baseline measurements or keep a really close eye on the performance.  Like many DBAs, I wrote several of my own tools and used the “built-in tools” like Profiler, PerfMon, and sp_who2 (did I mention most of our instances are SQL Server 2000?).  These have all served me well for in-the-moment troubleshooting and maintenance, but they really fell down on the job when I was called upon to “prove” that SQL Server performance was acceptable and more importantly had not degraded recently (i.e. historical comparisons).  I really didn’t have anything from a historical comparison perspective, but I was able to show that current performance was acceptable, and deflect attention back onto other components (which in fact turned out to be the real culprit). That experience dramatically illustrated the need for better monitoring tools.  Coincidentally, I had been talking recently to my boss about the mini nightmare of monitoring several critical and interdependent overnight jobs that operate on separate instances of SQL Server.  Among other tools, I had been using Idera’s SQL Job Manager which is a free tool and did a nice job of showing me job schedules and histories in a nice calendar view.  This worked fairly well, and for the money (did I mention it was free?) it couldn’t be beat.  But it is based on the stored job history in MSDB, and there were other performance problems that we ran into when we started changing the settings for how much job history to retain, in order to be able to look back a month or more in the calendar view.  Another coincidence (if you believe in such things) was that when we had some of those performance challenges, I posted a couple of questions to the #sqlhelp hashtag on Twitter and Greg Gonzalez (@SQLSensei) suggested I check out SQL Sentry’s Event Manager.  At the time, I just thought he worked there, but later found out that he founded the company.  When I took a quick look at the features & benefits, the one that really jumped out at me is Chaining and Queueing which sounded like it would really help with our “interdependent jobs on different servers” issue. I know that is a lot of background story and coincidences, but hopefully you have stuck with me so far, and now we have arrived at the point where last week I downloaded and installed the 30-day trial of the SQL Sentry Power Suite, which is Event Manager plus Performance Advisor.  And I must say that I really like what I see so far.  Here are a few highlights: Great Support.  I had two issues getting the trial setup and monitoring a handful of our servers.  One of which was entirely my fault (missed a security setting in SQL 2008) and the other was mostly my fault (late change to some config settings that were apparently cached and did not get refreshed properly).  In both cases, the support staff at SQL Sentry were very responsive and rather quickly figured out what the cause and fix was for each of them.  This left me with a great impression of the company.  Kudos to them! Chaining and Queueing.  While I have not yet activated this feature, I am very excited about the possibilities.  We have jobs on three different instances of SQL Server that have to be run in a certain order, and each has to finish before the next can successfully begin, and I believe this feature will ensure just that.  It has been a real pain in the backside when one of those jobs runs just a little too long and does not finish before the job on another instance starts, thus triggering a chain reaction of either outright job failures, or worse, successful completion of completely invalid processing. Calendar View.  I really, really like the Event Manager calendar view where I can see all jobs and events across all instances and identify potential resource contention as well as windows of opportunity for maintenance activity.  Very well done, and based on Event Manager’s own database of accumulated historical information rather than querying the source instances every time. Performance Advisor Dashboard History View.  This view let’s me quickly select a date and time range and it displays graphs of key SQL Server and Windows metrics.  This is exactly the thing I needed to answer the “has performance changed recently” question at the beginning of this post. Reporting Services Subscription Jobs with Report Name.  This was a big and VERY pleasant surprise.  If you have ever looked at the list of SQL Server jobs that SQL Server Reporting Services creates when you make a Subscription, you will notice that they all have some sort of GUID as the name of the job.  This is really ugly, and really annoying because when you are just looking at the SQL Agent and Job Activity Monitor, if you see that Job X failed, you really do not have any indication in the name or the properties of the Job itself, as to what Report that was for.  But with SQL Sentry Event Manager you do.  The Jobs list in the Navigator pane in SQL Sentry, amazingly, displays the name of the Report that the Subscription Job is for.  And when you open it to see more details, it shows you the full Reporting Services path to that Report, so you can immediately track it down in the Report Manager in case you want to identify/notify the owner or edit the Subscription information.  I did not expect this at all, but I sure do like it.  HOORAY! That is just my first impressions from using the tools for a few days.  And I haven’t even gotten into how it showed me where I was completely mistaken about one aspect of my SQL Server disk configurations.  I’ll share that lesson in another blog entry.  But I have to say it again, the combination of Event Manager and Performance Advisor working together have really made me a fan.

    Read the article

  • How to Identify Which Hardware Component is Failing in Your Computer

    - by Chris Hoffman
    Concluding that your computer has a hardware problem is just the first step. If you’re dealing with a hardware issue and not a software issue, the next step is determining what hardware problem you’re actually dealing with. If you purchased a laptop or pre-built desktop PC and it’s still under warranty, you don’t need to care about this. Have the manufacturer fix the PC for you — figuring it out is their problem. If you’ve built your own PC or you want to fix a computer that’s out of warranty, this is something you’ll need to do on your own. Blue Screen 101: Search for the Error Message This may seem like obvious advice, but searching for information about a blue screen’s error message can help immensely. Most blue screens of death you’ll encounter on modern versions of Windows will likely be caused by hardware failures. The blue screen of death often displays information about the driver that crashed or the type of error it encountered. For example, let’s say you encounter a blue screen that identified “NV4_disp.dll” as the driver that caused the blue screen. A quick Google search will reveal that this is the driver for NVIDIA graphics cards, so you now have somewhere to start. It’s possible that your graphics card is failing if you encounter such an error message. Check Hard Drive SMART Status Hard drives have a built in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) feature. The idea is that the hard drive monitors itself and will notice if it starts to fail, providing you with some advance notice before the drive fails completely. This isn’t perfect, so your hard drive may fail even if SMART says everything is okay. If you see any sort of “SMART error” message, your hard drive is failing. You can use SMART analysis tools to view the SMART health status information your hard drives are reporting. Test Your RAM RAM failure can result in a variety of problems. If the computer writes data to RAM and the RAM returns different data because it’s malfunctioning, you may see application crashes, blue screens, and file system corruption. To test your memory and see if it’s working properly, use Windows’ built-in Memory Diagnostic tool. The Memory Diagnostic tool will write data to every sector of your RAM and read it back afterwards, ensuring that all your RAM is working properly. Check Heat Levels How hot is is inside your computer? Overheating can rsult in blue screens, crashes, and abrupt shut downs. Your computer may be overheating because you’re in a very hot location, it’s ventilated poorly, a fan has stopped inside your computer, or it’s full of dust. Your computer monitors its own internal temperatures and you can access this information. It’s generally available in your computer’s BIOS, but you can also view it with system information utilities such as SpeedFan or Speccy. Check your computer’s recommended temperature level and ensure it’s within the appropriate range. If your computer is overheating, you may see problems only when you’re doing something demanding, such as playing a game that stresses your CPU and graphics card. Be sure to keep an eye on how hot your computer gets when it performs these demanding tasks, not only when it’s idle. Stress Test Your CPU You can use a utility like Prime95 to stress test your CPU. Such a utility will fore your computer’s CPU to perform calculations without allowing it to rest, working it hard and generating heat. If your CPU is becoming too hot, you’ll start to see errors or system crashes. Overclockers use Prime95 to stress test their overclock settings — if Prime95 experiences errors, they throttle back on their overclocks to ensure the CPU runs cooler and more stable. It’s a good way to check if your CPU is stable under load. Stress Test Your Graphics Card Your graphics card can also be stress tested. For example, if your graphics driver crashes while playing games, the games themselves crash, or you see odd graphical corruption, you can run a graphics benchmark utility like 3DMark. The benchmark will stress your graphics card and, if it’s overheating or failing under load, you’ll see graphical problems, crashes, or blue screens while running the benchmark. If the benchmark seems to work fine but you have issues playing a certain game, it may just be a problem with that game. Swap it Out Not every hardware problem is easy to diagnose. If you have a bad motherboard or power supply, their problems may only manifest through occasional odd issues with other components. It’s hard to tell if these components are causing problems unless you replace them completely. Ultimately, the best way to determine whether a component is faulty is to swap it out. For example, if you think your graphics card may be causing your computer to blue screen, pull the graphics card out of your computer and swap in a new graphics card. If everything is working well, it’s likely that your previous graphics card was bad. This isn’t easy for people who don’t have boxes of components sitting around, but it’s the ideal way to troubleshoot. Troubleshooting is all about trial and error, and swapping components out allows you to pin down which component is actually causing the problem through a process of elimination. This isn’t a complete guide to everything that could likely go wrong and how to identify it — someone could write a full textbook on identifying failing components and still not cover everything. But the tips above should give you some places to start dealing with the more common problems. Image Credit: Justin Marty on Flickr     

    Read the article

  • Book Review: Brownfield Application Development in .NET

    - by DotNetBlues
    I recently finished reading the book Brownfield Application Development in .NET by Kyle Baley and Donald Belcham.  The book is available from Manning.  First off, let me say that I'm a huge fan of Manning as a publisher.  I've found their books to be top-quality, over all.  As a Kindle owner, I also appreciate getting an ebook copy along with the dead tree copy.  I find ebooks to be much more convenient to read, but hard-copies are easier to reference. The book covers, surprisingly enough, working with brownfield applications.  Which is well and good, if that term has meaning to you.  It didn't for me.  Without retreading a chunk of the first chapter, the authors break code bases into three broad categories: greenfield, brownfield, and legacy.  Greenfield is, essentially, new development that hasn't had time to rust and is (hopefully) being approached with some discipline.  Legacy applications are those that are more or less stable and functional, that do not expect to see a lot of work done to them, and are more likely to be replaced than reworked. Brownfield code is the gray (brown?) area between the two and the authors argue, quite effectively, that it is the most likely state for an application to be in.  Brownfield code has, in some way, been allowed to tarnish around the edges and can be difficult to work with.  Although I hadn't realized it, most of the code I've worked on has been brownfield.  Sometimes, there's talk of scrapping and starting over.  Sometimes, the team dismisses increased discipline as ivory tower nonsense.  And, sometimes, I've been the ignorant culprit vexing my future self. The book is broken into two major sections, plus an introduction chapter and an appendix.  The first section covers what the authors refer to as "The Ecosystem" which consists of version control, build and integration, testing, metrics, and defect management.  The second section is on actually writing code for brownfield applications and discusses object-oriented principles, architecture, external dependencies, and, of course, how to deal with these when coming into an existing code base. The ecosystem section is just shy of 140 pages long and brings some real meat to the matter.  The focus on "pain points" immediately sets the tone as problem-solution, rather than academic.  The authors also approach some of the topics from a different angle than some essays I've read on similar topics.  For example, the chapter on automated testing is on just that -- automated testing.  It's all well and good to criticize a project as conflating integration tests with unit tests, but it really doesn't make anyone's life better.  The discussion on testing is more focused on the "right" level of testing for existing projects.  Sometimes, an integration test is the best you can do without gutting a section of functional code.  Even if you can sell other developers and/or management on doing so, it doesn't actually provide benefit to your customers to rewrite code that works.  This isn't to say the authors encourage sloppy coding.  Far from it.  Just that they point out the wisdom of ignoring the sleeping bear until after you deal with the snarling wolf. The other sections take a similarly real-world, workable approach to the pain points they address.  As the section moves from technical solutions like version control and continuous integration (CI) to the softer, process issues of metrics and defect tracking, the authors begin to gently suggest moving toward a zero defect count.  While that really sounds like an unreasonable goal for a lot of ongoing projects, it's quite apparent that the authors have first-hand experience with taming some gruesome projects.  The suggestions are grounded and workable, and the difficulty of some situations is explicitly acknowledged. I have to admit that I started getting bored by the end of the ecosystem section.  No matter how valuable I think a good project manager or business analyst is to a successful ALM, at the end of the day, I'm a gear-head.  Also, while I agreed with a lot of the ecosystem ideas, in theory, I didn't necessarily feel that a lot of the single-developer projects that I'm often involved in really needed that level of rigor.  It's only after reading the sidebars and commentary in the coding section that I had the context for the arguments made in favor of a strong ecosystem supporting the development process.  That isn't to say that I didn't support good product management -- indeed, I've probably pushed too hard, on occasion, for a strong ALM outside of just development.  This book gave me deeper insight into why some corners shouldn't be cut and how damaging certain sins of omission can be. The code section, though, kept me engaged for its entirety.  Many technical books can be used as reference material from day one.  The authors were clear, however, that this book is not one of these.  The first chapter of the section (chapter seven, over all) addresses object oriented (OO) practices.  I've read any number of definitions, discussions, and treatises on OO.  None of the chapter was new to me, but it was a good review, and I'm of the opinion that it's good to review the foundations of what you do, from time to time, so I didn't mind. The remainder of the book is really just about how to apply OOP to existing code -- and, just because all your code exists in classes does not mean that it's object oriented.  That topic has the potential to be extremely condescending, but the authors miraculously managed to never once make me feel like a dolt or that they were wagging their finger at me for my prior sins.  Instead, they continue the "pain points" and problem-solution presentation to give concrete examples of how to apply some pretty academic-sounding ideas.  That's a point worth emphasizing, as my experience with most OO discussions is that they stay in the academic realm.  This book gives some very, very good explanations of why things like the Liskov Substitution Principle exist and why a corporate programmer should even care.  Even if you know, with absolute certainty, that you'll never have to work on an existing code-base, I would recommend this book just for the clarity it provides on OOP. This book goes beyond just theory, or even real-world application.  It presents some methods for fixing problems that any developer can, and probably will, encounter in the wild.  First, the authors address refactoring application layers and internal dependencies.  Then, they take you through those layers from the UI to the data access layer and external dependencies.  Finally, they come full circle to tie it all back to the overall process.  By the time the book is done, you're left with a lot of ideas, but also a reasonable plan to begin to improve an existing project structure. Throughout the book, it's apparent that the authors have their own preferred methodology (TDD and domain-driven design), as well as some preferred tools.  The "Our .NET Toolbox" is something of a neon sign pointing to that latter point.  They do not beat the reader over the head with anything resembling a "One True Way" mentality.  Even for the most emphatic points, the tone is quite congenial and helpful.  With some of the near-theological divides that exist within the tech community, I found this to be one of the more remarkable characteristics of the book.  Although the authors favor tools that might be considered Alt.NET, there is no reason the advice and techniques given couldn't be quite successful in a pure Microsoft shop with Team Foundation Server.  For that matter, even though the book specifically addresses .NET, it could be applied to a Java and Oracle shop, as well.

    Read the article

  • Why JSF Matters (to You)

    - by reza_rahman
          "Those who have knowledge, don’t predict. Those who predict, don’t have knowledge."                                                                                                    – Lao Tzu You may have noticed Thoughtworks recently crowned the likes AngularJS, etc imminent successors to server-side web frameworks. They apparently also deemed it necessary to single out JSF for righteous scorn. I have to say as I was reading the analysis I couldn't help but remember they also promptly jumped on the Ruby, Rails, Clojure, etc bandwagon a good few years ago seemingly similarly crowing these dynamic languages imminent successors to Java. I remember thinking then as I do now whether the folks at Thoughtworks are really that much smarter than me or if they are simply more prone to the Hipster buzz of the day. I'll let you make the final call on that one. I also noticed mention of "J2EE" in the context of JSF and had to wonder how up-to-date or knowledgeable the person writing the analysis actually was given that the term was basically retired almost a decade ago. There's one thing that I am absolutely sure about though - as a long time pretty happy user of JSF, I had no choice but to speak up on what I believe JSF offers. If you feel the same way, I would encourage you to support the team behind JSF whose hard work you may have benefited from over the years. True to his outspoken character PrimeFaces lead Cagatay Civici certainly did not mince words making the case for the JSF ecosystem - his excellent write-up is well worth a read. He specifically pointed out the practical problems in going whole hog with bare metal JavaScript, CSS, HTML for many development teams. I'll admit I had to smile when I read his closing sentence as well as the rather cheerful comments to the post from actual current JSF/PrimeFaces users that are apparently supposed to be on a gloomy death march. In a similar vein, OmniFaces developer Arjan Tijms did a great job pointing out the fact that despite the extremely competitive server-side Java Web UI space, JSF seems to manage to always consistently come out in either the number one or number two spot over many years and many data sources - do give his well-written message in the JAX-RS user forum a careful read. I don't think it's really reasonable to expect this to be the case for so many years if JSF was not at least a capable if not outstanding technology. If fact if you've ever wondered, Oracle itself is one of the largest JSF users on the planet. As Oracle's Shay Shmeltzer explains in a recent JSF Central interview, many of Oracle's strategic products such as ADF, ADF Mobile and Fusion Applications itself is built on JSF. There are well over 3,000 active developers working on these codebases. I don't think anyone can think of a more compelling reason to make sure that a technology is as effective as possible for practical development under real world conditions. Standing on the shoulders of the above giants, I feel like I can be pretty brief in making my own case for JSF: JSF is a powerful abstraction that brings the original Smalltalk MVC pattern to web development. This means cutting down boilerplate code to the bare minimum such that you really can think of just writing your view markup and then simply wire up some properties and event handlers on a POJO. The best way to see what this really means is to compare JSF code for a pretty small case to other approaches. You should then multiply the additional work for the typical enterprise project to try to understand what the productivity trade-offs are. This is reason alone for me to personally never take any other approach seriously as my primary web UI solution unless it can match the sheer productivity of JSF. Thanks to JSF's focus on components from the ground-up JSF has an extremely strong ecosystem that includes projects like PrimeFaces, RichFaces, OmniFaces, ICEFaces and of course ADF Faces/Mobile. These component libraries taken together constitute perhaps the largest widget set ever developed and optimized for a single web UI technology. To begin to grasp what this really means, just briefly browse the excellent PrimeFaces showcase and think about the fact that you can readily use the widgets on that showcase by just using some simple markup and knowing near to nothing about AJAX, JavaScript or CSS. JSF has the fair and legitimate advantage of being an open vendor neutral standard. This means that no single company, individual or insular clique controls JSF - openness, transparency, accountability, plurality, collaboration and inclusiveness is virtually guaranteed by the standards process itself. You have the option to choose between compatible implementations, escape any form of lock-in or even create your own compatible implementation! As you might gather from the quote at the top of the post, I am not a fan of crystal ball gazing and certainly don't want to engage in it myself. Who knows? However far-fetched it may seem maybe AngularJS is the only future we all have after all. If that is the case, so be it. Unlike what you might have been told, Java EE is about choice at heart and it can certainly work extremely well as a back-end for AngularJS. Likewise, you are also most certainly not limited to just JSF for working with Java EE - you have a rich set of choices like Struts 2, Vaadin, Errai, VRaptor 4, Wicket or perhaps even the new action-oriented web framework being considered for Java EE 8 based on the work in Jersey MVC... Please note that any views expressed here are my own only and certainly does not reflect the position of Oracle as a company.

    Read the article

  • Maintenance plans love story

    - by Maria Zakourdaev
    There are about 200 QA and DEV SQL Servers out there.  There is a maintenance plan on many of them that performs a backup of all databases and removes the backup history files. First of all, I must admit that I’m no big fan of maintenance plans in particular or the SSIS packages in general.  In this specific case, if I ever need to change anything in the way backup is performed, such as the compression feature or perform some other change, I have to open each plan one by one. This is quite a pain. Therefore, I have decided to replace the maintenance plans with a stored procedure that will perform exactly the same thing.  Having such a procedure will allow me to open multiple server connections and just execute an ALTER PROCEDURE whenever I need to change anything in it. There is nothing like good ole T-SQL. The first challenge was to remove the unneeded maintenance plans. Of course, I didn’t want to do it server by server.  I found the procedure msdb.dbo.sp_maintplan_delete_plan, but it only has a parameter for the maintenance plan id and it has no other parameters, like plan name, which would have been much more useful. Now I needed to find the table that holds all maintenance plans on the server. You would think that it would be msdb.dbo.sysdbmaintplans but, unfortunately, regardless of the number of maintenance plans on the instance, it contains just one row.    After a while I found another table: msdb.dbo.sysmaintplan_subplans. It contains the plan id that I was looking for, in the plan_id column and well as the agent’s job id which is executing the plan’s package: That was all I needed and the rest turned out to be quite easy.  Here is a script that can be executed against hundreds of servers from a multi-server query window to drop the specific maintenance plans. DECLARE @PlanID uniqueidentifier   SELECT @PlanID = plan_id FROM msdb.dbo.sysmaintplan_subplans Where name like ‘BackupPlan%’   EXECUTE msdb.dbo.sp_maintplan_delete_plan @plan_id=@PlanID   The second step was to create a procedure that will perform  all of the old maintenance plan tasks: create a folder for each database, backup all databases on the server and clean up the old files. The script is below. Enjoy.   ALTER PROCEDURE BackupAllDatabases                                   @PrintMode BIT = 1 AS BEGIN          DECLARE @BackupLocation VARCHAR(500)        DECLARE @PurgeAferDays INT        DECLARE @PurgingDate VARCHAR(30)        DECLARE @SQLCmd  VARCHAR(MAX)        DECLARE @FileName  VARCHAR(100)               SET @PurgeAferDays = -14        SET @BackupLocation = '\\central_storage_servername\BACKUPS\'+@@servername               SET @PurgingDate = CONVERT(VARCHAR(19), DATEADD (dd,@PurgeAferDays,GETDATE()),126)               SET @FileName = '?_full_'+                      + REPLACE(CONVERT(VARCHAR(19), GETDATE(),126),':','-')                      +'.bak';          SET @SQLCmd = '               IF ''?'' <> ''tempdb'' BEGIN                      EXECUTE master.dbo.xp_create_subdir N'''+@BackupLocation+'\?\'' ;                        BACKUP DATABASE ? TO  DISK = N'''+@BackupLocation+'\?\'+@FileName+'''                      WITH NOFORMAT, NOINIT,  SKIP, REWIND, NOUNLOAD, COMPRESSION,  STATS = 10 ;                        EXECUTE master.dbo.xp_delete_file 0,N'''+@BackupLocation+'\?\'',N''bak'',N'''+@PurgingDate+''',1;               END'          IF @PrintMode = 1 BEGIN               PRINT @SQLCmd        END               EXEC sp_MSforeachdb @SQLCmd        END

    Read the article

  • Why does this mod_rewrite rule 'not-match'? (big rewrite log included)

    - by Christopher
    I've got a scenario involving two domains: WordPress site hosted on domain1.com domain2.co.uk, simply redirecting users to domain1 via mod_rewrite This rule applies irrespective of whether www. is specified or not. (It's eventually removed from the URL, I'm a no-WWW fan.) There's nothing on domain2.co.uk at all except for an .htaccess with some mod_rewrite rules. However, I want to be able to allow users to be redirected to the correct article URI even if they specify the "wrong" URL (i.e., a 301 redirect preserving the stuff after the first forward slash). I'm currently achieving this with this ruleset: RewriteCond %{HTTP_HOST} ^((www\.)?[^\.]+)\.domain2\.co\.uk [NC,OR] RewriteCond %{HTTP_HOST} ^domain2\.co\.uk [NC] RewriteRule ^(.*)$ http://domain1.com/$1 [R=301,L] This works but is uglier than I want it to be. I'm not a mod_rewrite zen master, but from what I can tell the top rule should match irrespective of whether www. is specified... But it doesn't. In order to catch www-less requests, I need the second RewriteCond. From the rewrite log, with just the first RewriteCond: [domain2.co.uk/sid#e200498][rid#e670168/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/ -> [domain2.co.uk/sid#e200498][rid#e670168/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '' [domain2.co.uk/sid#e200498][rid#e670168/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e670168/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/ [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.html [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.htm [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.shtml [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php5 [domain2.co.uk/sid#e200498][rid#e666c98/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php4 [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php3 [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.phtml [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.cgi [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/403.shtml -> 403.shtml [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '403.shtml' [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/403.shtml [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/favicon.ico -> favicon.ico [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri 'favicon.ico' [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/favicon.ico [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/404.shtml -> 404.shtml [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '404.shtml' [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/404.shtml However with the second RewriteCond added, the rule works, and the logs show this: [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/ -> [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '' [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)?[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^domain2\.co\.uk' [NC] => matched [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (2) [perdir /home/devnull/domains/domain2.co.uk/public_html/] rewrite '' -> 'http://domain1.com/' [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (2) [perdir /home/devnull/domains/domain2.co.uk/public_html/] explicitly forcing redirect with http://domain1.com/ [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] escaping http://domain1.com/ for redirect [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] redirect to http://domain1.com/ [REDIRECT/301] Can anybody help me figure out why it just won't work with the one rule? I feel like I'm missing the bleeding obvious, and while the second RewriteCond is a valid workaround, it's a kludge and that annoys me. ;-) All help appreciated...

    Read the article

  • T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

    - by edelwater
    Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the VGA output works. Symptom: Screen blanks / no display, but it works on the second monitor Steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noise of about 10 seconds) - right after the sounds ends, the monitor gets black. Sometimes it seems to be the same each time. Software: Installed no new software before/after, running ZoneAlarm and antivirus. Other: It does not feel hot in any place, there don't seem to be running processes with strange behaviour. Warranty: Out of warranty What was I doing: Typing text on a website and doing some PHP coding in a text editor. What can I do here other than buy a new laptop? Does it sound familiar to known cases? Update 1: Exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj), http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 And here: "I have that same problem. I replaced the CCRL on mine and it works fine when the screen is not screwed in. Once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the LCD display is no use, he tried it three times). Same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core issue but some electric issue so it seems replacing the LCD is not the thing to do here. If it is not the LCD that needs to be replaced (see other threads), which parts can I order to fix this? Is there any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense? Update 2: I replaced the inverter with another inverter, but IO have the same problem. I DID notice that the inverter is the component that makes the sssssssssssssHHHHHHHHHH sound AND it becomes very hot in a few seconds. (So both the old and the test one) The problem is hmmm wat is then the thing that makes the inverter hot by (assumption) after which it shuts itself down. Is it either the input or the output? The output seems to me not, because the screen seems to function so it must be the electricity coming in. But what causes it to become so hot would it be the VGA card outputting some unusual high voltage seems unlikely? I am looking for the component to order / replace update 3: Great news. Ewendish gave me the hint to look in the BIOS. While I was in the BIOS I noticed that the screen did not switch off and there was not a high pitched sound. So I lowered some settings in the BIOS. I then noticed that with brightness turned to 0 (via FN End), it does not make a high pitched sound and does not turn off, with brightness turned up just three "stripes" it starts making the sound. So I could from now on work under lowest brightness modus or... see where the problem lies. So as stated below with either power management or display drivers / ATI Catalyst settings / Windows display settings. I'm trying to see where it lies, but I will google some first. Update 4: I wiped clean the Windows XP installation and installed Windows 7 on it. Unfortunately the problem remains: as soon as the brightness goes up the screen starts hissing. This means... back to original thought: it probably IS a hardware problem. Although ... again... if it is NOT the inverter, what is it? Could it be the backlightning component? I could try to switch that with a another T60... but this is quite tricky.

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58  | Next Page >