Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 55/421 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Can't figure out error in Cisco ASA log "regular translation creation failed for icmp ..."

  - by Martijn Heemels

  Every few seconds our new Cisco ASA 5505 firewall is logging errors that I can't figure out with my limited Cisco experience. Severity Date Time Syslog ID Source IP Destination IP Description 3 Mar 25 2010 17:21:14 305006 8.8.8.8 regular translation creation failed for icmp src inside:10.10.0.200 dst outside:8.8.8.8 (type 3, code 3) 3 Mar 25 2010 17:18:37 305006 8.8.4.4 regular translation creation failed for icmp src inside:10.10.0.200 dst outside:8.8.4.4 (type 3, code 3) The logged inside IP is our internal DNS resolver, and the outside IP's are Google's public DNS servers. ICMP Type 3 Code 3 means "Port Unreachable" Our "outside" interface has a fixed IP and our "inside" interface is in the 10.10.0.0/16 subnet. The 'Inspect DNS' Service Policy is enabled, with the preset DNS inspection map. Furthermore there's an ACL that allows all inbound ICMP on the "outside" interface. I've spent hours trying to figure this one out, so any and all advice is welcome!

  Read the article

• Hardware for 4 Monitors

  - by Simon

  Looking to build several systems to output to 4 monitors over DVI. I notice most of the recent Nvidia and ATI/AMD cards have dual-DVI ports. Can I simply install two of these cards to get four monitors - or are only some cards capable of running side-by-side with another? How can I tell before purchasing? Simon.

  Read the article

• USB Hardware vs. Software Write Lock

  - by TreyK

  I'm in the market for a USB flash drive, and remember this cool feature a tiny 32MB flash drive of mine had: a write lock switch. This seemed like it would be an amazing feature to have as a shield against any nastiness happening to the drive on an unfamiliar computer. However, very few drives on the market offer this feature. Instead, it seems that forms of software protection are the more prominent method. This software protection causes me a bit of uneasiness, as it seems like this software wouldn't be nearly as bulletproof as a physical switch. Also, levels of protection seem to vary from product to product. Being able to protect certain folders from reading and/or writing would be nice, but is the security trade-off worth it? Just how effective can this software protection be? Wouldn't a simple format be able to clean any drive with software protection? My drive must also be compatible with Windows XP, Vista, and 7, as well as Linux and Mac. What would be the best way forward for getting a well-sized (~8GB) flash drive with a strong write protection implementation, for little or no more than a regular drive? Thanks.

  Read the article

• Windows SBS 2003 DNS taking over network

  - by Simon

  I have Windows Small Business Server 2003 premium edition on my new server box, this hosts a webapp on IIS. It has set up a DNS Server to solve requests to the webapp. I have a linux server/router that has does DNAT and portforwards port 80 to the new box. My linux router serves as a firewall and dhcp When i plug the SBS2003 server to the network, it leaves everyone on my network without web browsing, it looks like the DNS requests are going to the new server. I configured the DNS forwarders on SBS2003 to my ISP dns but it doesnt work... Is there something i am missing?

  Read the article

• Ping, firewall or DNS problem on Win Server 2008 R2

  - by Fred Kaiser

  Hi there, I've installed windows server 2008 as a VM for the developers here to work on. Installed SQL Server 2008 as well as IIS7. I am not quite sure why, I can remote into that machine using the name I gave to it (winserverdev) but the guys that are supposed to use the bloody thing can't. One very interesting thing is that I can connect but I can't ping... not the name nor the IP address. Is there anything that I should be looking in order to make it work? Any ideas are welcome. Thanks heaps in advance, I really appreciate it. Cheers, Fred Kaiser

  Read the article

• how to protect telnet access to smtp port 25?

  - by Michael Mao

  Hi all: Please consider the following: 192-168-1-106:~ michael$ telnet <remote_server_ip> 25 Trying <remote_server_ip>... Connected to li*****.linode.com. Escape character is '^]'. 220 mindinscription.net ESMTP Postfix (Ubuntu) quit 221 2.0.0 Bye Connection closed by foreign host. Is this very bad? how to protect port 25 from malicious attackers? I've already set up a firewall, but not very sure what to do in this case. Basically I'd like to use this server to only send emails as alert messages, not receiving any external emails. Many thanks to the help in advance.

  Read the article

• AWS EC2 security group source

  - by greener

  I'm currently trying to configure a security group and allow MS SQL connections from my other instance. I want to be able to specify the security group's name as the source. But the connection is not going through. The instance's firewall has a rule to allow connections on the port. In fact, if I specify the IP of the machine as the source, it works. Just not the security group name. There are two other rules for the same port and they're for specific IPs only. What am I doing wrong?

  Read the article

• Static NAT in AWS's Virtual Private Cloud (VPC)

  - by user1050797

  Currently in a VPC with a public and a private subnet, all internet bound traffic from the private subnet could be routed via an NAT instance. The NAT instance will port address translate the packet's source IP to use the NAT instance's elastic IP, so the public server can reply to this public address. This is a PAT mechanism. My question is there a way for me to do a static NAT on my NAT instance -- Using the same NAT instance to static NAT an unassociated but reserved elastic IP to a private subnet host. This NAT instance will behave like a physical firewall doing static nat'ing for a bunch of private ip's.

  Read the article

• Ubuntu: Monitor hardware RAID and notify upon failure?

  - by Andrew

  I am using the 3ware 9650SE-2LP Raid controller for a 2-drive RAID 1 setup in some new Ubuntu 10.04 x64 servers. Is there a way for the server to send me a notification when one of the drives fails? I would prefer an e-mail if possible. Thanks.

  Read the article

• Running multiple services on Port 443, Tunnel SSH over HTTPS

  - by lajuette

  Situation: I want to tunnel SSH sessions through HTTPS. I have a very restrictive firewall/proxy which only allows HTTP, FTP and HTTPS traffic. What works: Setting up a tunnel through the proxy to a remote linux box that has a sshd listening at port 443 The problem: I have to have a web server (lighty) running at port 443. HTTPS traffic to other ports is forbidden by the proxy. Ideas so far: Set up a virtual host and proxy all incoming requests to localhost: (e.g. 22) $HTTP["host"] == "tunnel.mylinux.box" { proxy.server = ( "" => (("host" => "127.0.0.1", "port" => 22)) ) } Unfortunately this won't work. Am i doing something wrong, or is there a reason, that this won't work?

  Read the article

• Safely Remove Hardware (USB drive) needs End Process for rundll32.exe - Windows XP SP3

  - by Michael Warner

  Image Name PID Modules ========================= ====== ============================================= rundll32.exe 252 ntdll.dll, kernel32.dll, msvcrt.dll, GDI32.dll, USER32.dll, IMAGEHLP.dll, ShimEng.dll, AcGenral.DLL, ADVAPI32.dll, RPCRT4.dll, Secur32.dll, WINMM.dll, ole32.dll, OLEAUT32.dll, MSACM32.dll, VERSION.dll, SHELL32.dll, SHLWAPI.dll, USERENV.dll, UxTheme.dll, guard32.dll, fltlib.dll, comctl32.dll, comctl32.dll, NvMcTray.dll, SETUPAPI.dll, IMM32.dll, nvapi.dll I have to end the rundll32.exe process to safely remove my USB drive. Given the modules rundll32.exe is running, do you know which running module(s) would prevent the USB drive from being safely removed, and if so is there a more permanent straightforward solution such as changing an automatic service (the list from services.msc) into a disabled/manual service or maybe something else you can think of?

  Read the article

• Running hardware with only 32bit drivers in 64bit windows

  - by Howard

  Recently we had to upgrade a system to handle added HD IP cameras. This upgrade involved an entirely new computer build with the exception of a rather pricey Geovision DVR (PCI/GV1480 series). Apparently while these cards do support Windows 7, they do not support Windows 7 x64. I'm stuck between a rock and a hard place here trying to figure out how we can remedy this, is there a virtualization solution that will allow devices with driver issues to passthru to the Guest OS? I was thinking XPMode may work for this solution however I am unsure if it runs 32bit or 64bit and if it'll allow driver-issue devices to pass to it. Any help would be greatly appreciated, Best Regards, Howard

  Read the article

• How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

  - by sbwoodside

  I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

  Read the article

• FTP on Linux "Failed to retrieve directory listing" not firewall issue

  - by Jaka Prasnikar

  I've got an VPS in germany running Debian X64. I have very strange issue. I have ISPConfig CP installed using proftpd and I can not connect to FTP by any means. Few hours ago I've had installed DirectAdmin on CentOS same VPS and same issue. Simply when I connect to FTP server I get these: Status: Resolving address of web02.defikon.com Status: Connecting to 130.255.190.71:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 50 allowed. Response: 220-Local time is now 12:15. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER default1 Response: 331 User default1 OK. Password required Command: PASS ****** Response: 230-User default1 has group access to: client0 sshusers Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing I even tried telnet localhost 21 and the same happends. Once I issue command "LIST" I get time out. I've tried every thing and I can't get this to work =( Please help ! P.S.: iptables is turned off.

  Read the article

• help needed for server hardware configuration

  - by sansknowledge

  hi, basically i am software guy got recently promoted to managerial cadre which requires giving recommendation for server to run software developed by our company , the software is a work flow management and the db is oracle 11 , approximately the size of daily transaction would be around 40 gb, and it should be connected to ~ 150 client machines , the client machine will be growing. help on terms of cpu, processor, memory , rack and stack or raid (i really yet to understand that concept) OS, will be greatly appreciated.

  Read the article

• Win 7 XP Mode, run hardware?

  - by JL

  I have a Web Cam thats built into my laptop, no drivers exist for a 64Bit env (Thank you Sony!). Now I am wondering if I can somehow publish the web cam from XP Mode into my Win 7 environment. Does anyone know if this is possible?

  Read the article

• ADMIN$ and other shares not working remotely on XP machines

  - by makerofthings7

  I'm trying to use ADMT to migrate several XP machines to a new domain and the utility (nor command line) is able to access the admin$ share or any drive share. I've added the required registry key (HKCurrent\Services\LanMan\Param) for both servers and workstation admin sharing, rebooted the PC and still am unable to access it. How can I access the admin share on these PCs? If it helps, this machine used to have McAfee installed, and the Windows firewall enabled. I stoppped both of them and the machine is still not allowing me to access it remotely by a drive$ share.

  Read the article

• Running a Vonage router behind a Linksys Firewall

  - by sludge

  I have a Vonage router used for outgoing VOIP calls. It gets a LAN ip by connecting to a Linksys WRT54g via DHCP. From there, it cannot actually get a WAN ip or connect out. What do I need to port forward?

  Read the article

• Cookies blocked by router?

  - by Martin wiboe

  Hello, My friend has a D-Link DI-524 router that she uses for her home broadband. It's a pretty vanilla setup with the standard firewall settings, DHCP enabled etc. However, recently she has experienced something strange - cookies are not working on every computer on her LAN, whether using FF3.5 or IE8. I tried viewing the HTTP traffic using Fiddler2, and the requests come through fine (mind you, Internet browsing still works flawlessly) but whenever a website tries to set a cookie using the "Set-Cookie:" header, my computer sees that line as "Set-*ookie:" with the cookie contents removed. I have never seen anything like this - do you have any idea? Regards, Martin

  Read the article

• How to redirect logs from Cisco firewall to a specific file ?

  - by nitins

  We need to redirect the logs from our Cisco firewall(SA520-K9) to syslogd server(it's a CentOS server). The settings are done on the firewall. But the messages from firewall are going to /var/log/messages and console instead of /var/log/firewall.log which is our requirent. *.info;mail.none;authpriv.none;cron.none /var/log/messages authpriv.* /var/log/secure mail.* -/var/log/maillog cron.* /var/log/cron *.emerg * uucp,news.crit /var/log/spooler local7.* /var/log/firewall.log This is our syslog config file. Any advices ?

  Read the article

• How can I track down what part of pfsense is blocking website access?

  - by Chase Florell

  I've got a PFSense firewall/gateway on our network. Everything works great except for the fact that I cannot access one specific website. Pfsense is running the following packages Country Block LightSquid nmap notes squid squidGuard Strikeback I can access every single website I've ever tried aside from one that we need for business use (http://bridalnetwork.ca) here's the traceroute frodo:~ chase$ traceroute bridalnetwork.ca traceroute to bridalnetwork.ca (192.197.103.73), 64 hops max, 52 byte packets 1 rohan (192.168.5.1) 6.618 ms 1.662 ms 9.207 ms 2 * * * 3 * * rohan (192.168.5.1) 7.225 ms !H 4 rohan (192.168.5.1) 5.314 ms !H 5.701 ms !H 7.573 ms !H frodo:~ chase$ How can I figure out what the reason behind the blockage is? note: this has been tested on every computer on the network with the same results. ps: the pfsense box is 'rohan' (192.168.5.1) Here's what I get with Squid enabled and here's what I get with Squid disabled

  Read the article

• Windows 8 Pro Remote Desktop issue

  - by Mike C.

  I have a weird issue here. I'm running Windows 8 Pro. The client computer is also running Windows 8 Pro. Remote Desktop works when I'm in the same network. I tried connecting using my external IP Address and my DynDNS account, neither works. I disabled Windows Firewall and setup DMZ for my computer on the router, still can't get remote desktop to work. I verified www.canyouseeme.org, port 3389 is open, which is obvious since I'm running DMZ! My ISP, Bell Canada (modem/router: Sagemcom F@st 2864), blocks port 80 and 25, but I don't need those for RDP, do I? The funny thing is RDP rejects the connection instantaneously for my IP or DynDNS while it takes a while for another address. Thank you, Michael

  Read the article

• UDP packets to IP addresses other than specific ones not arriving and not shown in Wireshark

  - by Max

  I'm writing a service using UDP, but I can't manage to reply to the client. When sending to the client via the DHCP-assigned IP (192.168.1.143) Wireshark shows no sent packets. The server receives and Wireshark shows any packet sent by the client (broadcasted). If I send to a random, unassigned IP Wireshark doesn't show it. I thought the NIC would happily send it, since there is a router in the way - shouldn't Wireshark show it, even though it cannot possibly be received by a remote endpoint? If I send to either the router IP or another (specific, there is only one other) computer, the packet is shown in Wireshark. I am running Windows 7, the firewall is turned off using the control panel. Does the fact that wireshark doesn't show these packets mean that they aren't sent? What reason could there be for showing packets to one IP, but not another, on the same subnet?

  Read the article

• software and hardware

  - by pravin

  i tried to find out the mac address in my notebook by run, then cmd and then config /all (by the procedure)but i didn't find it in my notebook inspiron mini dell. can u help to find the mac address? Is there any setting?

  Read the article

• Access to NTP via IP which doesn't change often

  - by faulty

  I'm trying to sync the clock of our production server located in a data center with pool.ntp.org. For security reason, our servers has no internet access unless we requested to open specific ip/port explicitly. I worked out a list of IPs based on 0.asia.ntp.org 1.asia.ntp.org 2.asia.ntp.org 3.asia.ntp.org Not realizing ntp.org is using round robin DNS and the servers being voluntary, they changes from time to time. In fact the IP I've got from 3.asia.ntp.org last month is no longer working now. I'm wondering if there's a publicly known NTP server that doesn't change as often or if there's a way to go around this without having to request an update to the firewall on a monthly basis. I believe many admin is facing the same issue here.

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >