Search Results

Search found 16616 results on 665 pages for 'home sharing'.

Page 55/665 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

• Configuring network route between two routers on home network

  - by Paul

  I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

  Read the article

• How to use 2 or more internet connections on the same network?

  - by Rogue

  Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

  Read the article

• System and Router configuration for setting up a home firewall based on Zentyal

  - by Ako

  I am not much of a system administrator, so please be patient if this looks too simple for you. I have a several computers at home, and all of them connect using an ADSL modem/router (and Wireless AP). I have been attacked several times (mainly from Russia and Ukraine), so I thought I should have some kind of firewall, besides the ESET firewall on my Windows 7. So now I have these (new) configuration: I have a small ADSL modem (Zyxel brand) which has only one Ethernet port. This modem is used to connect to internet and is configured in NAT mode. The interface has is configured with IP address 192.168.1.1. I have an old PC and I have installed zentyal on it. It has two Ethernet ports, eth0 and eth1. Eth0 is connected to the Zyxel modem with IP 192.168.1.2 and is checked as the WAN interface (external). I have another ADSL modem which is also a router with 4 Ethernet ports and Wireless AP. One of the Ethernet ports is connected to eth1 on Zentyal box. The Ethernet port's IP is 192.168.2.1 and Zentyal's eth1 is 192.168.2.2. Now, I want to enable other computers to connect to internet through the router both using Wireless and Ethernet. The problem is that I don't know how to configure the router so it routes connections to the Zentyal box. Does anyone have any clue? Again I am sorry if this looks stupid. Thanks.

  Read the article

• How To Monitor Home Wireless Network Connected Devices Bandwith

  - by GWLlosa

  (Originally posted on SuperUser, not sure if it might be better suited here) I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

  Read the article

• Proper Outlook Free/Busy status when working from home

  - by rwmnau

  Our office (pretty large - about 200 people) has recently started part-time telecommuting. It's only one day/week now, but it's already raised some questions about availability, so I wanted to see how the users here, some of whom I'm sure telecommute to a corporate job, how they set their out of office status. Outlook has four statuses, and here's what I (and most others?) take them to mean: Free: I'm available for meetings Busy: I'm in a meeting or otherwise occupied, and unavailable Tentative: Shy away from scheduling over, but I'm available if needed Out of office: I'm on vacation and unavailable. However, I don't travel for work - do people tend to use this status to mean they're remote, but available for a phone call/bridge? As we begin to telecommute, I'll be available by phone for meetings, but not in person - any meeting can have a conference bridge, but some meetings just need to be in person. I'd like to send the right message about my status - people can schedule meetings with me on my telecommute days, but they should expect me to be on a conference bridge when they do. What status do people use? Does "Out of Office" correctly reflect that you're working from home, even though I perceive this to mean that somebody is on vacation? Maybe I'm the only one confused here, but as a company that's never before done telecommuting of any kind, I'm in the dark about standard practices. Thanks for the insight! Though this isn't a technical question directly, I'm hoping it's still applicable to the group and constructive - if it's not, please close it and accept my apology.

  Read the article

• Advice for UPC/Surge Protector in home office

  - by Fred

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• WAN Optimization for Small Office/Home Office

  - by TiernanO

  I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

  Read the article

• Advice for UPC/Surge Protector in home office

  - by user37755

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• Need to set up a proxy on Linksys E3200 to filter home internet

  - by Justin Amberson

  the fact that I have a Linksys E3200 may not be important. I can configure the router through the web interface, but I don't know the things I will be toggling are called. I already do simple port forwarding to access applications on my Mac remotely. So router admin is not something I technically need explained. I'm looking to running a proxy on my home computer, that filters all HTTP traffic that goes through my router. So if my daughter is on her iPad and accesses Safari, my Mac will be the judge of the validity of the request. I need something like NetNanny I guess, but local. Actually, anything that can just filter all port 80 traffic that runs locally, but maybe validates with a password? I truly truly hope this question falls within the bounds of Serverfault. I'm not a total internet newb but I'm at a loss for what to Google. If possible answer this question: Is there a webapp that can listen on port 80, and validate requests to port 80 with a password? If so, can I forward all traffic on port 80 to my Mac, to be re-routed to the user? Is this the same as a VPN? Thank you for your help. Justin

  Read the article

• Exchange 2010 allows outside access to network files

  - by user2891127

  One of our users discovered by accident he could access our network files from his smartphone while at home. No VPN needed. He was sent an email with an internal link to a network share on his android. When he opened the email and clicked on the link, he could browse our files while at home. Looking at the access logs, the connection to the share and files he accessed came from our mail server (Exchange 2010). We have no sharepoint servers running at all, and certainly not on the Exchange server. What is this function/feature called, and is it possible to turn this function/feature off? Should I turn this off?

  Read the article

• NFS default to 777

  - by ipengineer

  I have an NFS share. This share is shared between several different applications. Our web server is running PHP and when it creates directories it is not setting the permissions correctly so it cannot write to the directory once created. How can I mount this NFS share to where PHP has full read/write access? Below is the directory that has been created along with the media server export options and the mount options on the web server. Ideally I could set the permissions on /opt/mount and whatever group/user is on that directory when I mount to that point the share assumes those permissions. dr----x--t. 2 nobody nobody 4096 Jun 5 2014 user_2 Mount output: media.dc1:/home/fs_share on /opt/mount type nfs (rw,vers=4,addr=10.10.20.127,clientaddr=10.10.20.42) Exports file from media server: /home/fs_share 10.10.20.0/255.255.255.0(rw,sync,no_root_squash)

  Read the article

• Sharing storage between servers

  - by El Yobo

  I have a PHP based web application which is currently only using one webserver but will shortly be scaling up to another. In most regards this is pretty straightforward, but the application also stores a lot of files on the filesystem. It seems that there are many approaches to sharing the files between the two servers, from the very simple to the reasonably complex. These are the options that I'm aware of Simple network storage NFS SMB/CIFS Clustered filesystems Lustre GFS/GFS2 GlusterFS Hadoop DFS MogileFS What I want is for a file uploaded via one webserver be immediately available if accessed through the other. The data is extremely important and absolutely cannot be lost, so whatever is implemented needs to a) never lose data and b) have very high availability (as good as, or better, than a local filesystem). It seems like the clustered filesystems will also provide faster data access than local storage (for large files) but that isn't of vita importance at the moment. What would you recommend? Do you have any suggestions to add or anything specifically to look out for with the above options? Any suggestions on how to manage backup of data on the clustered filesystems?

  Read the article

• Castle, sharing a transient component between a decorator and a decorated component

  - by Marius

  Consider the following example: public interface ITask { void Execute(); } public class LoggingTaskRunner : ITask { private readonly ITask _taskToDecorate; private readonly MessageBuffer _messageBuffer; public LoggingTaskRunner(ITask taskToDecorate, MessageBuffer messageBuffer) { _taskToDecorate = taskToDecorate; _messageBuffer = messageBuffer; } public void Execute() { _taskToDecorate.Execute(); Log(_messageBuffer); } private void Log(MessageBuffer messageBuffer) {} } public class TaskRunner : ITask { public TaskRunner(MessageBuffer messageBuffer) { } public void Execute() { } } public class MessageBuffer { } public class Configuration { public void Configure() { IWindsorContainer container = null; container.Register( Component.For<MessageBuffer>() .LifeStyle.Transient); container.Register( Component.For<ITask>() .ImplementedBy<LoggingTaskRunner>() .ServiceOverrides(ServiceOverride.ForKey("taskToDecorate").Eq("task.to.decorate"))); container.Register( Component.For<ITask>() .ImplementedBy<TaskRunner>() .Named("task.to.decorate")); } } How can I make Windsor instantiate the "shared" transient component so that both "Decorator" and "Decorated" gets the same instance? Edit: since the design is being critiqued I am posting something closer to what is being done in the app. Maybe someone can suggest a better solution (if sharing the transient resource between a logger and the true task is considered a bad design)

  Read the article

• Sharing a COM port over TCP

  - by guinness

  What would be a simple design pattern for sharing a COM port over TCP to multiple clients? For example, a local GPS device that could transmit co-ordinates to remote hosts in realtime. So I need a program that would open the serial port and accept multiple TCP connections like: class Program { public static void Main(string[] args) { SerialPort sp = new SerialPort("COM4", 19200, Parity.None, 8, StopBits.One); Socket srv = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); srv.Bind(new IPEndPoint(IPAddress.Any, 8000)); srv.Listen(20); while (true) { Socket soc = srv.Accept(); new Connection(soc); } } } I would then need a class to handle the communication between connected clients, allowing them all to see the data and keeping it synchronized so client commands are received in sequence: class Connection { static object lck = new object(); static List<Connection> cons = new List<Connection>(); public Socket socket; public StreamReader reader; public StreamWriter writer; public Connection(Socket soc) { this.socket = soc; this.reader = new StreamReader(new NetworkStream(soc, false)); this.writer = new StreamWriter(new NetworkStream(soc, true)); new Thread(ClientLoop).Start(); } void ClientLoop() { lock (lck) { connections.Add(this); } while (true) { lock (lck) { string line = reader.ReadLine(); if (String.IsNullOrEmpty(line)) break; foreach (Connection con in cons) con.writer.WriteLine(line); } } lock (lck) { cons.Remove(this); socket.Close(); } } } The problem I'm struggling to resolve is how to facilitate communication between the SerialPort instance and the threads. I'm not certain that the above code is the best way forward, so does anybody have another solution (the simpler the better)?

  Read the article

• exchange web service C# code send email from home

  - by KK

  Is it possible to write C# code as below and send email using my home network? I have a valid user name and password on that exchange server. Is there any configuration that I can set to achieve this? BTW this code blow works when I run it within office network. I want this code to work when run from any network. String cMSExchangeWebServiceURL = (String)System.Configuration.ConfigurationSettings.AppSettings["MSExchangeWebServiceURL"]; String cEmail = (String)System.Configuration.ConfigurationSettings.AppSettings["Cemail"]; String cPassword = (String)System.Configuration.ConfigurationSettings.AppSettings["Cpassword"]; String cTo = (String)System.Configuration.ConfigurationSettings.AppSettings["CTo"]; ExchangeServiceBinding esb = new ExchangeServiceBinding(); esb.Timeout = 1800000; esb.AllowAutoRedirect = true; esb.UseDefaultCredentials = false; esb.Credentials = new NetworkCredential(cEmail, cPassword); esb.Url = cMSExchangeWebServiceURL; ServicePointManager.ServerCertificateValidationCallback += delegate(object sender1, X509Certificate certificate, X509Chain chain, SslPolicyErrors sslPolicyErrors) { return true; }; // Create a CreateItem request object CreateItemType request = new CreateItemType(); // Setup the request: // Indicate that we only want to send the message. No copy will be saved. request.MessageDisposition = MessageDispositionType.SendOnly; request.MessageDispositionSpecified = true; // Create a message object and set its properties MessageType message = new MessageType(); message.Subject = subject; message.Body = new TestOutgoingEmailServer.com.cogniti.mail1.BodyType(); message.Body.BodyType1 = BodyTypeType.HTML; message.Body.Value = body; message.ToRecipients = new EmailAddressType[3]; message.ToRecipients[0] = new EmailAddressType(); //message.ToRecipients[1] = new EmailAddressType(); //message.ToRecipients[2] = new EmailAddressType(); message.ToRecipients[0].EmailAddress = "[email protected]"; message.ToRecipients[0].RoutingType = "SMTP"; //message.CcRecipients = new EmailAddressType[1]; //message.CcRecipients[0] = new EmailAddressType(); //message.CcRecipients[0].EmailAddress = toEmailAddress.ElementAt(1).ToString(); //message.CcRecipients[0].RoutingType = "SMTP"; //There are some more properties in MessageType object //you can set all according to your requirement // Construct the array of items to send request.Items = new NonEmptyArrayOfAllItemsType(); request.Items.Items = new ItemType[1]; request.Items.Items[0] = message; // Call the CreateItem EWS method. CreateItemResponseType response = esb.CreateItem(request);

  Read the article

• Looking for a fiber optic "switch" or "router" for home use

  - by Shrout1

  The gist of my question: What is a "fiber optic" switch called? I.E. a layer 2 ethernet switch that uses fiber TX and RX connections and sends layer 2 network traffic between the fiber strands that are connected. Can someone purchase a dedicated fiber switch that does not have copper ethernet ports? What is the current average price of a device like this? Not necessarily looking for product endorsements, just information Might not make sense to go this route if it is too cost prohibitive What type of fiber connector is used for terminating a fiber strand into a jack on the wall? Can fiber be "patched" using two jacks and a "patch" cable? Is signal loss a concern with the longest runs at 100-200ft, a patch cable and media converters? The full story: My parents had unterminated fiber optic cable and terminated Cat5e run throughout their home when it was built in 2004. 10 years later the Cat5e isn't providing the throughput that my father needs to accomplish multiple streams of HD and fast system backups throughout the house. He can't reach gigabit speeds across the distance of the Cat5e runs. We are both interested in terminating the fiber connections and using them as high speed "backbones" to copper switches in each room of the house. It would be easy to attain gigabit speeds (or better, eventually) using the fiber. I have searched and searched for a "fiber optic switch" or "fiber optic router" and cannot find the correct term to describe this piece of hardware. We can use fiber media converters at the end points of each connection, however it would be nice to have a "patch panel" set up in the network closet in the basement that has fiber connections on it and switches the ethernet streams between the connections/systems in the house. Each fiber media converter costs between $50-$100 a piece... After 10 or so terminated connections it might make sense to find a piece of hardware that does not require media converters. That would depend upon the cost of this hardware Somewhat unrelated, if we are able to route between these fiber strands successfully, what is the physical connector type used in a jack on the wall? Just like RJ45 has a wall outlet (depicted below): What is the fiber optic equivalent of this? In the interim could we "patch" a couple fiber strands together in the network closet? Would signal loss be of concern with a run length of 100-200 feet, a patch cable and two media converters? If that would work then it could be used until the funds are available for more.

  Read the article

• Windows 7 Home hangs at "Welcome" screen

  - by White Phoenix

  I'm asking on behalf of a friend who's currently having problems with his machine. Windows 7 Home 32-bit. He's too far away for me to help by going over to his house - I'm helping him over the Internet. This is his current machine: http://www.newegg.com/Product/Product.aspx?Item=N82E16883227134 The only two changes he made to that machine is to swap out the gfx card for a EVGA GTX 460 and the PSU for a Corsair TX650. Here's what happened: He was playing a computer game (fairly CPU/GPU intensive) and had some music going in the background in foobar while playing. Suddenly, he notices the music stopped playing, so he switches to foobar to try to close it, but it freezes up (window won't respond). So he figures it's just foobar having a bad day and force quits that program. Suddenly, his game won't respond, so he force quits that, then the entire computer just went to crap at that point, so he hits the restart button on his machine. Computer POSTS fine, but now he gets stuck at the Windows "welcome" screen (his account is set to auto-login). HD activity light is solid yellow but he doesn't hear HDD activity. He tried booting into Safe Mode - gets stuck at the "welcome screen". Tried a STartup Repair within Windows 7, it found a few problems, but still gets stuck at welcome. I advised him to boot off the DVD - sfc /scannow found nothing (couldn't use the regular /scannow option; says there's a repair pending, had to use use offbootdir/offwindir command switches). Ran startup repair 3 times - found nothing. My friend runs virus/malware scans on a regular basis, so he's fairly sure it's not that either. Right now I'm having my friend run chkdsk /R on the computer while in this Startup Recovery mode - so far it's caught a few bad sectors. However at this point I'm kinda wondering which way to go if chkdsk doesn't fix it. Quick Google search said someone had success by booting Windows with bootlogging on - some others have success with running the aforemented chkdsk, etc. The fact that Windows cannot even boot into Safe Mode concerns me. While we're waiting for chkdsk /R to finish, are there any other options I can give my friend short of reinstalling Windows 7? He has his data on a separate partition so that's not a major problem (though it'll be an annoyance for him). I suspect his hard drive may be having some issues, but my main concern is getting him back up and running before we start diagnosing the hard drive (I may have him run some sort of SMART test utility later).

  Read the article

• Polished DIY Projector Is Painted Right onto the Wall

  - by Jason Fitzpatrick

  If you’re contemplating building a projector screen but find yourself not entirely unhappy with just projecting right onto the wall, this simple paint-it-on-the-wall upgrade is for you. Check out the above video to see the steps required to patch, paint, and frame a space on your wall to serve as a projection screen. You’ll need spackle, sandpaper, white paint, and some very basic carpentry skills to complete the simple wood frame for your painted-on screen. If you’d like to create a screen using the same technique but make it removable (for adjustments or to take it with you when you move out) you can just as easily use the paint-it-on technique with a piece of hardboard instead of the drywall. [via Hack A Day] HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks

  Read the article

• A way for an Upstart event to be sent whenever ecryptfs homedir mounted/unmounted?

  - by David Olivier

  I have an encrypted homedir (ecryptfs) and I'm wanting to run a private mysql daemon with the database files in my homedir. The daemon should be started whenever the homedir is mounted, and stopped before the homedir is unmounted. It seems I have to write an Upstart script, which doesn't seem too hard; the problem is triggering it. Is there already any Upstart event that is sent on these occasions? Or must I insert an "initctl emit" somewhere? Where? It seems the encrypted homedir is mounted whenever I either open my GUI session or ssh to my account. Is there a common place in these two processes where I might insert code? (I don't want to patch and compile any C code, just insert maybe a few lines somewere.) David

  Read the article

• Silabs cp2102 driver problem

  - by Zxy

  I downloaded appropriate driver from its own site, unzipped it and then tried to install it. But: root@ghostrider:/home/zero/Downloads# tar xvf cp210x-3.1.0.tar.gz cp210x-3.1.0/ cp210x-3.1.0/COPYING cp210x-3.1.0/cp210x/ cp210x-3.1.0/cp210x-3.1.0.spec cp210x-3.1.0/cp210x/.rpmmacros cp210x-3.1.0/cp210x/configure cp210x-3.1.0/cp210x/cp210x.c cp210x-3.1.0/cp210x/cp210x.h cp210x-3.1.0/cp210x/cp210xuniversal.c cp210x-3.1.0/cp210x/cp210xuniversal.h cp210x-3.1.0/cp210x/installmod cp210x-3.1.0/cp210x/Makefile24 cp210x-3.1.0/cp210x/Makefile26 cp210x-3.1.0/cp210x/rpmmacros24 cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0/cp210x/Rules.make cp210x-3.1.0/INSTALL cp210x-3.1.0/makerpm cp210x-3.1.0/PACKAGE-LIST cp210x-3.1.0/README cp210x-3.1.0/RELEASE-NOTES cp210x-3.1.0/REPORTING-BUGS cp210x-3.1.0/rpm/ cp210x-3.1.0/rpm/brp-java-repack-jars cp210x-3.1.0/rpm/brp-python-bytecompile cp210x-3.1.0/rpm/check-rpaths cp210x-3.1.0/rpm/check-rpaths-worker root@ghostrider:/home/zero/Downloads# cd cp210x-3.1.0 root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# ls COPYING cp210x-3.1.0.spec makerpm README REPORTING-BUGS cp210x INSTALL PACKAGE-LIST RELEASE-NOTES rpm root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# run ./makerpm No command 'run' found, did you mean: Command 'zrun' from package 'moreutils' (universe) Command 'runq' from package 'exim4-daemon-heavy' (main) Command 'runq' from package 'exim4-daemon-light' (main) Command 'runq' from package 'sendmail-bin' (universe) Command 'grun' from package 'grun' (universe) Command 'qrun' from package 'torque-client' (universe) Command 'qrun' from package 'torque-client-x11' (universe) Command 'lrun' from package 'lustre-utils' (universe) Command 'rn' from package 'trn' (multiverse) Command 'rn' from package 'trn4' (multiverse) Command 'rup' from package 'rstat-client' (universe) Command 'srun' from package 'slurm-llnl' (universe) run: command not found root@ghostrider:/home/zero/Downloads/cp210x-3.1.0# sudo ./makerpm + uname -r + kernel_release=3.2.0-25-generic-pae + pwd + current_dir=/home/zero/Downloads/cp210x-3.1.0 + export current_dir + uname -r + KVER=3.2.0-25-generic-pae + echo 3.2.0-25-generic-pae + awk -F . -- { print $1 } + KVER1=3 + echo 3.2.0-25-generic-pae + awk -F . -- { print $2 } + KVER2=2 + sed -e s/3\.2\.//g + echo 3.2.0-25-generic-pae + KVER3=0-25-generic-pae + [ -f /root/.rpmmacros ] + echo 2 2 + [ 2 == 4 ] ./makerpm: 25: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 29: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /root/.rpmmacros + d=/var/tmp/silabs + [ ! -d /var/tmp/silabs ] + mkdir /var/tmp/silabs + cd /var/tmp/silabs + r=/var/tmp/silabs/rpmbuild + o=cp210x-3.1.0 + s=/var/tmp/silabs/rpmbuild/SOURCES + spec=cp210x-3.1.0.spec + rm -rf /var/tmp/silabs/rpmbuild + mkdir rpmbuild + mkdir rpmbuild/SOURCES + mkdir rpmbuild/SRPMS + mkdir rpmbuild/SPECS + mkdir rpmbuild/BUILD + mkdir rpmbuild/RPMS + cd /var/tmp/silabs/rpmbuild/SOURCES + rm -rf cp210x-3.1.0 + mkdir cp210x-3.1.0 + cp -r /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile24 /home/zero/Downloads/cp210x-3.1.0/cp210x/Makefile26 /home/zero/Downloads/cp210x- 3.1.0/cp210x/Rules.make /home/zero/Downloads/cp210x-3.1.0/cp210x/configure /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210x.c /home/zero/Downloads/cp210x- 3.1.0/cp210x/cp210x.h /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.c /home/zero/Downloads/cp210x-3.1.0/cp210x/cp210xuniversal.h /home/zero/Downloads/cp210x- 3.1.0/cp210x/installmod /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros24 /home/zero/Downloads/cp210x-3.1.0/cp210x/rpmmacros26 cp210x-3.1.0 + echo 2 2 + [ 2 == 4 ] ./makerpm: 64: [: 2: unexpected operator + echo 0-25-generic-pae 0-25-generic-pae + [ 0-25-generic-pae -gt 15 ] ./makerpm: 68: [: Illegal number: 0-25-generic-pae + cp /home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24 cp210x-3.1.0/.rpmmacros cp: cannot stat `/home/zero/Downloads/cp210x-3.1.0/cp210x/.rpmmacros24': No such file or directory + MyCopy=0 + rm -f cp210x-3.1.0.tar + rm -f cp210x-3.1.0.tar.gz + tar -cf cp210x-3.1.0.tar cp210x-3.1.0 + gzip cp210x-3.1.0.tar + cp /home/zero/Downloads/cp210x-3.1.0/cp210x-3.1.0.spec /var/tmp/silabs/rpmbuild/SPECS + rpmbuild -ba /var/tmp/silabs/rpmbuild/SPECS/cp210x-3.1.0.spec ./makerpm: 121: ./makerpm: rpmbuild: not found + [ -f /root/.rpmmacros.cp210x ] How may I solve my problem? Thanks

  Read the article

• western digital caviar black. EXT4-fs error [migrated]

  - by azat

  Recently I update my HDD on desktop machine, and bought WD Caviar Black. But after I format & copy information to it (using dd), and fix partitions size: I have next errors in kern.log: Aug 27 16:04:35 home-spb kernel: [148265.326264] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9054, 32254 clusters in bitmap, 32258 in gd Aug 27 16:07:11 home-spb kernel: [148421.493483] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9045, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.481693] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10299, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.487147] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.258711] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4345, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.277591] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.278202] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4344, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.284760] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.291983] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9051, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297495] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.297916] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9050, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297940] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.303213] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4425, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.312127] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.312487] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4424, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.317858] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.322231] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4336, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.326250] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.326599] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4335, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.332397] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.341957] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5764, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.350709] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.351127] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5763, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.355916] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.401055] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10063, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.404357] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.414699] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10073, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.420411] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.493933] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9059, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.493956] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. One time, machine rebooted (not manually), when I turn it on, it runs fsck on /dev/sdc2 and fix some errors and some files are missing on /dev/sdc2 I'v check /dev/sdc2 for badblocks, it doesn't have it ( using e2fsck -c /dev/sdc2 ) Here is the output of fsck http://pastebin.com/D5LmLVBY What else I can do to understand what's wrong here? BTW for /dev/sdc1 no message like that, in kern.log Linux version: 3.3.0 Distributive: Debian wheezy

  Read the article

• Issue 15: Oracle Exastack: Are You Ready?

  - by rituchhibber

    ORACLE EXASTACK: ARE YOU READY? SVP Focus: Chris Baker Oracle Exastack Partner Focus The Benefits of Oracle Exastack Oracle PartnerNetwork Exchange @ Oracle OpenWorld PARTNER FOCUS Oracle Exastack Partner Focus Steve McNickle is VP Europe for cVidya, the long-term Oracle Gold level partner currently racking up accreditation for its solutions as a pioneering partner in the Oracle Exastack Optimized programme Read the full article SOLUTIONS FOCUS The Benefits of Oracle Exastack Paul Thompson, Director of Oracle EMEA Alliances and Solutions Partner Programs, explains the benefits of the Oracle Exastack Program in supporting ISV partners across the Oracle Exa family Read the full article ORACLE FOCUS OPN Exchange @ Oracle OpenWorld Sylvie Michou, Senior Director, Partner Marketing & Communications and Strategic Programs, introduces the dedicated Oracle PartnerNetwork Exchange @ Oracle OpenWorld Read the full article

  Read the article

• library put in /usr/local/lib is not loaded

  - by IARI

  Let me state in advance: One might think this question would is for server fault, but I think is is Ubuntu (config) specific. In short: I have put libwkhtmltox.so in /usr/local/lib as stated in installation instructions linked below, but it appears the library is not loaded. I am trying to install php-wkhtmltox, a php extension for wkhtmltox on my local desktop (Ubuntu 12.04). I have extracted the source and changed to the corresponding directory. After running phpize, ./configure fails at checking for libwkhtmltox support... yes, shared not found configure: error: Please install libwkhtmltox I suspect the reason the library is not loaded is that the path is not checked!? how do I proceed? Here are instructions I followed: http://davidbomba.com/index.php/2011/08/04/php-wkhtmltox/ http://roundhere.net/journal/install-wkhtmltopdf-php-bindings/

  Read the article

• western digital caviar black. EXT4-fs error

  - by azat

  Recently I update my HDD on desktop machine, and bought WD Caviar Black. But after I format & copy information to it (using dd), and fix partitions size: I have next errors in kern.log: Aug 27 16:04:35 home-spb kernel: [148265.326264] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9054, 32254 clusters in bitmap, 32258 in gd Aug 27 16:07:11 home-spb kernel: [148421.493483] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9045, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.481693] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10299, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:17 home-spb kernel: [148546.487147] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.258711] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4345, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.277591] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.278202] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4344, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.284760] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.291983] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9051, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297495] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.297916] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9050, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.297940] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.303213] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4425, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.312127] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.312487] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4424, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.317858] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.322231] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4336, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.326250] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.326599] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 4335, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.332397] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.341957] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5764, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.350709] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:42 home-spb kernel: [148572.351127] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 5763, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:42 home-spb kernel: [148572.355916] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.401055] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10063, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.404357] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.414699] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 10073, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.420411] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Aug 27 16:09:43 home-spb kernel: [148572.493933] EXT4-fs error (device sdc2): ext4_mb_generate_buddy:739: group 9059, 32254 clusters in bitmap, 32258 in gd Aug 27 16:09:43 home-spb kernel: [148572.493956] JBD2: Spotted dirty metadata buffer (dev = sdc2, blocknr = 0). There's a risk of filesystem corruption in case of system crash. One time, machine rebooted (not manually), when I turn it on, it runs fsck on /dev/sdc2 and fix some errors and some files are missing on /dev/sdc2 I'v check /dev/sdc2 for badblocks, it doesn't have it ( using e2fsck -c /dev/sdc2 ) Here is the output of fsck http://pastebin.com/D5LmLVBY What else I can do to understand what's wrong here? BTW for /dev/sdc1 no message like that, in kern.log Linux version: 3.3.0 Distributive: Debian wheezy

  Read the article

• Trying to turn an old computer into a server. Where do I start?

  - by Stanton.Sculpture

  My old computer is a mac powerbook g4 that I am considering turning into an Ubuntu Server for my house of eight to share movies and music and whatever. I've never even thought about doing this kind of stuff before so I don't even know where to start. Can someone point me in the right direction? My Concerns: Most of my house mates have macs. Will there be compatibility issues? Can I make it a wireless network? My old powerbook g4 might not have the balls. Money Thanks!

  Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >