Search Results

Search found 1720 results on 69 pages for 'house hunting'.

Page 55/69 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • Games consoles won't connect through the TP-Link TL-WA500G Access Point

    - by Manfred Wolff
    I hope that someone can help me. I have several Laptops and other devices, all using my Wireless Router (Sky Digital Netgear) To extend the range to the back of the house, I purchased a TP-Link TL-WA500G Range extender. configured just as a pure repeater, it picks up the signal from the Netgear Router. The Netgear Router does the DHCP, handing out the IP addresses. This all works a treat with several different laptops and my iPone4S, but when my son tries to use his XBox360, Sony Playstation3 or the Nintendo Wii those devices fail to acquire an IP address. They just sit their waiting for the IP config. This also happens with my wife's HTC desire ONE Android phone. My son says that, when his HTC Desire C won't get an IP address, he just unplugs the AP briefly - the phone will connect and he puts the AP back on. Once he is connected to the Router, the AP won't disturb function. The Games Consoles don't seem to work like that. They stop working, when the AP is reconnected. I had my son try to configure permanent IP addresses, and he said that did not work either, though I have to confirm that, as I did not see that for myself. Has anybody seen this before? I have searched the Net and have not found any similar problems anywhere. I wonder if there is setting somewhere that would fix this. Many thanks for anyone reading this and trying to help. M

    Read the article

  • Curious enigma of a network cable / connection / quality

    - by Foo Bar
    So, the situation is like this: I'm renting an apartment in a large house and I'm sharing internet with the landlord who lives downstairs. The internet is (in my best guess) optical 20/20Mbit. I don't know how it's all wired in his flat (haven't been there / seen it). Anyway, in my flat comes a cable which seems to be connected directly to the optic to ethernet router (and the password is the default one, so I have access, he he). There was a switch connected to that and to wires that go around the flat, and the wiring is terrible. It's even mixing phone and ethernet, and from what I see some cables are even interconnected!? Anyways, this cable that comes to my flat is very short. I can barely connect my computer on it, but if I do, I seem to get decent speed / performance. Not great, but decent. If, however, I connect switch to it (tried 2 different switches and a wifi switch) it's all blinking but I can't even connect to 192.168.1.1 (the router). DHCP fails, ping is losing 80-100% of replies. So I connected this cable directly to the other cable which goes to my work room, with a connector that has two female jacks and no electronics. Now when I connect my computer in my room, again, the performance is decent. When I connect WRT54GL (with tomato, DHCP disabled) to it and I plug a cable in this WRT and to my computer... the performance is gone. Download seems okay on Speedtest, but upload is .2Mbps and it's connecting forever. So what kind cable troll am I having here? Any ideas?

    Read the article

  • How do I encapsulate the application server from the web and database servers?

    - by SNyamathi
    So I've been doing some reading and it seems like the best practice would be to have separate database, application, and web servers. There are a few things that I've failed to understand - please feel free to recommend any reading materials that would address these topics. Database (assume MySQL) Application server communication: Does the database server do any sort of checks on the SQL commands sent / returned, or is it just a "dumb pipe" that responds to SQL commands by spitting back data? Application server (assume Tomcat) Web Server Almost the reverse here, is it the web server that is more of a pipe to the internet that forwards requests to the application server and spits back responses? I'm not wording this well, but I'm trying to ask - is it the application server that is responsible for validating data received by from requests? ex: Parsing POSTs Validating user logins Encrypting decrypting data Furthermore, how do these two servers communicate? I'm trying to keep things as flexible as possible here, so while I could write a web server in Java and use Java to communicate between the web and app server, that doesn't sound very modular. What if I want to use Python or some other language to replace the web server later on? What if I want to make a non-web facing application used in house written in C++ or something.

    Read the article

  • Troubleshooting my internet connection

    - by Simon Verbeke
    While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling. When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same. I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds. A sketch of the (relevant part of) the network: My PC ----- extender ----- modem ^ ^ ^ Wired | Wired | This thing connects two cables to each other All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E I have no idea what is going on here and I don't know how to find out either. Any help is welcome! If you need any more info, please ask.

    Read the article

  • WAN Optimization for Small Office/Home Office

    - by TiernanO
    I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

    Read the article

  • 750Gig Hard Drive shows full with only 315Gigs used

    - by Chris Kelly
    I have a Win7 laptop with a 750Gig C: drive. It came partitioned with 714Gig usable from manufacturer. I installed programs, music files, etc up to 285 gigs. As of a few weeks ago it showed 285 Gigs. Two weeks of house guests later and it shows HD is full. I deleted some files but it still shows 652 Gigs on this drive while there are only 285 Gigs on drive. Relevant details: I am Administrator on laptop and have fair knowledge of what I am doing. I did not restore from backup, restore from mirror, upgrade HD's or anything else that would have touched the partition structure. Just daily use as imaging machine and web. I have checked partitions under disk administrator - no change, still partitioned with 714Gigs usable. Have looked through computer C drive by hand showing Hidden files and folders - no change. I have used JDisk Report to double check - it shows I have only 285 Gigs on C drive. I triple checked with TreeSize run as Administrator and it also shows 285 Gigs on C drive - yet Windows 7 still shows almost full. I used Windows 7 Utilities to Check for Disk Errors, and Defragged the drive. No errors shown and no change after Defrag.

    Read the article

  • Why does the wireless network icon have a red X over it when everything seems to work?

    - by Kristo
    I booted my almost brand new laptop running Windows 7 this morning and noticed a red X through the wireless networking icon in the system tray. At first I thought something was wrong, but clicking on it shows a good connection to my wireless network. I had no problem getting here to post this question. I'm very new to Windows 7 so I have no idea how to troubleshoot this myself. Is there an actual problem here? Can I fix the icon so it doesn't falsely display an error (I assume that's what the red X means)? Here's what I know: I can get here to post this question. There's at least one unsecured network available that I'm not connected to. I can see a bunch of wireless networks, presumably from my neighbors' houses. There are no other computers turned on in my house right now. The device manager shows no problems with any devices. I can ping my default gateway, DNS, and yahoo.com with no problem.

    Read the article

  • 412 Precodition Failed error only occurs on certain networks

    - by Andy
    One of my favorite websites: http://jessiejofficial.com (yes, I'm a Jessie J Fan :')) has recently started displaying the error message "412 Precondition Failed" whenever I visit it from my home network, even when I use Tor Browser. At first I thought that this was an issue with the whole website, however I have contacted the web developer and he has said that they has been plenty of hits within the last 48 hours. Plus, I discovered tonight that I can access the website from my phone, through the mobile network. So it appears to just be my network as all of the devices in my house connected to the WiFi display the same error when I try to visit any page of the site. However there have been no changes that we are aware of or are noticeable to our network since the website was accessible, and I have just heard that another person in a different part of the country is experiencing the same difficulties also. Any help/advice/suggestions would be appreciated greatly Update: When trying to ping 'jessiejofficial.com' in Windows command prompt the request times out on all four attempts, on any computer connected to the wireless network. I can now also confirm that the same thing occurs on my MacBook Pro.

    Read the article

  • Query specific nameserver for a particular domain upon VPN connect

    - by MT
    Some background: I have a work laptop with Ubuntu 9.10 on it. I have a small network at home where I've been running some basic services (for myself/my family) for 10 some years. In my home network there is a nameserver (Fedora) running Bind 9 with two "views". One view is the "outside" view and it provides name resolution (to the Internet at large) for email, a wiki, and a couple of blogs. The "inside" view provides name resolution (to the internal RFC1918 addresses of theses servers) as well as all the inside hosts, network equipment, ...etc. I connect with an openvpn client to my home network from outside (such as work). What I'd like to be able to do is resolve names on my internal network across this VPN (so I get the RFC1918 "inside" responses) without fully changing my resolver to the DNS server at my hose. For example, if I connect to the VPN from work, I can change my resolver (by editing resolv.conf) to the DNS server at my house (across the VPN) and then successfully resolve all of the inside DNS names on my home network. The issue I have with this is that now I'm no longer able to resolve "inside" names provided by my work's DNS servers (because I'm using my home DNS server). Alternatively, I can connect to the VPN and access my home severs via IP addresses directly, but this is inconvenient and causes issues with Apache name-based hosting (among other things). In the end, the effect I'm trying to achieve is as follows: When I connect to the VPN I automatically start sending DNS requests for *.myhomedomain.com to my home nameserver, but any other requests continue to go the the nameserver I was using before (the one I received on my company LAN via DHCP). When I disconnect the VPN, requests for *.myhomedomain.com go back to the local LAN DNS server (e.g. all requests are going there now). I'm looking for suggestion at to how this can be accomplished.

    Read the article

  • iPhone 3G can't see any WiFi networks, ever

    - by torbengb
    I've got WiFi turned on in the settings, and ask before connect turned off. My iPhone 3G should see several WiFi networks, but it lists none. It also does not list my own network, which my computers see just fine. It has worked earlier but stopped working recently (possibly because of or at the same time of other trouble (which a restore solved)). The iPhone is not jailbroken. The SSID is not hidden, uses WPA2. It also finds no WiFi networks when I'm at a friend's house. His iPhone 2G sees several WiFi networks, including his own. When I use the manual entry method, specifying my home SSID and the proper WPA2 passkey, then click join, the iPhone says couldn't find that network. Same at my friend's place, with his SSID and passkey. I've just backed up my iPhone, then restored it, to see if refreshing the firmware would help. It didn't change anything. Is my iPhone broken? How can I fix this?

    Read the article

  • Is there any way to shut up my ATI HD 5770?

    - by slpsys
    So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

    Read the article

  • Help in recovering partition

    - by goshopedero
    Okay so i had one NTFS partition and i wanted to resize it, but while resizing it with partition magic some error occurred and now i am not able to enter in my partition anymore. I have slackware 13 also and i tried mounting the partition from there but it didn't succeed. One friend of mine came to my house with some live-cd os called backtrack3 and when he booted from cd, he was able to mount the damaged partition - and was able to read/write on it anywhere. I saw my files, they are all there, so nothing's erased just the partition is somehow damaged. But strange thing was that from backtrack we weren't able to mount some of the working partitions of my comp, and we could mount the damaged one. So i am asking for some help here: My files are all there, and i saw them from backtrack. What can i do to fix the partition so it would be usable from windows/slackware again ? Please tell me anything you've got because i have some important data on it. Thank you.

    Read the article

  • Wifi antenna extension with F-connector/RG-6(RG-59) cable?

    - by rjz2000
    In an older house, the wire mesh in walls surrounding the furnace behave like a Faraday cage and block wifi signals. It is also difficult to lay new cable, however there is television cable to multiple locations due to there once having been a roof-installed, television antenna. It would be relatively trivial to install the wifi router at the center distribution point, then have the antenna broadcasting/receiving the signal plugged in at each of the old television outlets. I assume that it would not be too difficult to find an adapter for SMA <- F-type connectors. The cable is actually RG-59 rather than RG-6, but I assume that it still has relatively good RF isolation along its length, which is no more than a couple hundred feet in any direction. Does anyone know a problem with the idea? Will a router get confused if there is /too little/ interference between the two antenna? Is that length of cable (~100ft) too long for the signal a router broadcasts? I have seen that it is also possible to use old ~$30/each FiOS cable modems available on eBay to extend a network over television cable. However, that seems like a less elegant solution, and might interfere with upnp and dlna services I'd like to have work on a single network. Thanks if anyone has answers or suggestions before I try this project!

    Read the article

  • Best way to patch (8) RJ45 ports from one room to another.

    - by zimmer62
    I have a 48 port patch panel in my basement, which I've wired almost all of them to various rooms around the house. Many are not actually being used at the moment, but pretty much all of them are wired to somewhere. As of recent, I've put in an HTPC in my media closet (different room), and I'm finding I need a lot more RJ45 plugs to this area. I have 4 drops here, and adding a switch will not solve my problems. I'm using the cabling for other things such as IR and Serial devices, not just Ethernet. What I'm hoping to do is add an 8 port panel in that media closet, and tie those into an 8 port panel on my rack next to the 48 port... What I don't want to do is pull 8 separate cables one by one from one area to the other unless someone has a technique that will allow me to do that quickly, and painlessly. Do they make cables with more conductors specifically for this purpose? Or patch panels that are designed for a special cable essentially just extending ports from one room to another?

    Read the article

  • "merging" multiple internet connections

    - by Spencer R
    I've seen this question asked several times here on SF, but I'm looking for some updated information; specifically concerning Server 2012. I'm in the process of buying a home so I'm trying to get some plans together on how I want to structure my network. Internet speeds aren't the greatest and connections can be unreliable where the house is so I was thinking of having two DSL lines installed. My question is, how could I leverage those two connections to create the best network I can, in terms of speed and reliability. My parents will be moving in with me - they consume a lot of bandwidth as it is, but then add my internet traffic to it, and I'm headed for a lot of frustration. I thought I remember reading somewhere that Server 2012 has some new functionality to utilize multiple connections on multiple NICs in a way that wasn't possible in earlier versions of Server. Not sure if Windows will work but, I'm an application developer and spend the majority of my time in Windows environments. However, I've only recently returned to the Windows world, so I'd like my main server at home to run Win Server 2012 so that I can become more familiar with it.

    Read the article

  • Duplicate forwarded messages in Blackberry when using BIS

    - by Avery Payne
    Our Setup External email arrives at a Postfix server, is scanned, and then forwarded via settings in transport (using the RELAY:[{ip-address}] for a given address) to an Exchange 2007 server. Some users are on Exchange, but a few are still on the Postfix server (they will be moved in the near future). IMAPS is provided for external connections via Dovecot; in-house, IMAP is provided for the Gateway and native MAPI is used for Exchange/Outlook. Blackberries are connected via BIS, which uses Dovecot as a reverse-proxy IMAPS service to connect to Exchange (when the mailbox exists on Exchange, otherwise it connects to the mailbox on the gateway). The Issue We have a user that, when they forward an email on their Outlook client, they get a duplicate of the original message on their Blackberry. When I say duplicate, I mean that they have a copy of the forwarded version of the message (i.e. their version of the message that they obtained hitting the forward button), and a copy of the original message that shows up at the same time. The expected behavior is to just see the forwarded message, not the forwarded message and a 2nd copy of the original message. We've only seen this with Outlook users that also have a Blackberry. Other IMAP clients, such as OS X Mail or Thunderbird, do not exhibit this behavior when connecting to the Exchange server; forwarded messages work as expected. The Questions what is causing this to happen? why does it only affect Outlook/Blackberry setups, and not TBird/Blackberry or OSX-Mail/Blackberry? how do we get it to stop, before people go insane and never forward messages again?

    Read the article

  • Cannot connect to my VPN Server from another network

    - by SantaC
    ok here is the deal. I have a Windows 2008 R2 server with RRAS installed configured for VPN. I also have DHCP running. On my DC I have AD running and they're connected with my domain. I am only using one NIC though. As a client I have Windows 7. So I tried connecting to my VPN server through my own network, which worked fine, so the setup is correct. However, when I tried connecting to my VPN server on another network, it does not work. I went to my brothers home and tried connecting to my server but it did not pass. So on my VPN server I have ip: 192.168.2.99 At my brothers house, i did the configuration on his windows 7 and it cannot connect to that ip. I am operating on the 192.168.2.1 network and he is operating on the 192.168.0.1 network. So how do I configure his client in order to get it to work? I tried changing his ip to the 192.168.2.x network, but i am not sure you can do that. I need some help here what to do.

    Read the article

  • Questions for anyone who has used Sun Type 7 keyboards

    - by Irinotecan
    So I noticed that Oracle is still selling Sun Type 7 keyboard and mouse packages. I was thinking of buying one for a Linux box at my house so I had easy access to some of the extra keys such as Compose and Alt-GR. I have some questions though before I do for anyone who has used these -- it's been a very long time since I've used an actual Sun keyboard. They show that both a PC and UNIX layout is available. Unfortunately, I cannot find anywhere a clear picture of both layouts to determine the difference. Can anyone post pictures of the 2 different layouts for me to take a look at? I don't remember what some of the "Solaris shortcut" keys do, like Props, Front, Stop, and Again. Are these vestiges from OpenWindows? Do they have any usage on a modern Solaris like OpenSolaris running Gnome? Do they automatically map to anything useful on Linux, or am I going to have to map them myself to something with XModMap? When I last used a Sun keyboard, I remember it having a rather mushy feel to it, so I am wondering if any touch typists could weigh in on whether this keyboard "feels nice" for day to day touch typing. Thanks!

    Read the article

  • Route all traffic of home network through VPN

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Optimize Apache performance

    - by Phliplip
    I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

    Read the article

  • Does cloud computing offer this? [closed]

    - by TheBlackBenzKid
    I have some newb questions I want answering please about cloud hosting - we are currently looking at Rackspace and getting a windows box. This is the situation: We have 15 computers in our office. We have 3 printers, some wifi and some network plugged. We have a standard router and the office share things via dropbox. The computers are not on Windows SBS or something similar. We want a cloud hosting solution that will offer User can login on any machine in the office and see the machine software User can login on any machine in the office and open Outlook and their emails and signature will be on exchange automatically A shared company folder on the network All printers automatically installed on the network Users can login remotely to access emails via the web At the moment we have a network company saying we need Xeon server in house with backup and psu and Windows SBS with license for each machine and also we need cabinets and cabling setup and also load balancers and modification of our DNS for emails. My question is this. Can cloud offer this? Can we have a server in the cloud that does this? Is it possible I mean the computers would be wireless connected to this cloud and you turn the machine on and its hosted?

    Read the article

  • Route all traffic of home network through VPN [migrated]

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Will the removal of NAT (with the use of IPv6) be bad for consumers? [closed]

    - by Jonathan.
    Possible Duplicate: How will IPv6 impact everyday users? (World IPv6 Day) As I understand when we have finally made the switch to IPv6 not only will NAT be unnecessary but it is incompatible with IPv6? Will that mean that ISPs will have to serve multiple IP addresses per customer? Will they provide a range of addresses for each customer or as each device connects will they get an IP address that isn't necessarily near that of the other devices in their house? But overall will this be bad for the Internet users? as surely it will allow ISPs to see exactly how many devices are being used, and so allow them to charge for the use of additional IP addresses? And then if that happens, what happens when you try to connect an extra device to your network? Will it simply not get an IP address? In my home we have about 15-20 devices connected at once, but for places where there are hundreds of devices, it seems like the perfect opportunity for ISPs to charge more? I think I may have it completely wrong, so is there somewhere where there is an explanation of who things will work when IPv6 becomes the norm?

    Read the article

  • What are the right questions to ask when deciding whether to use Chef or Puppet?

    - by John Feminella
    I am about to start a new project which will, in part, require deploying many identical nodes of approximately three different classes: Data nodes, which will run sharded instances of MongoDB. Application nodes, which will run instances of a Ruby on Rails application and an older ASP.NET MVC application. Processing nodes, which will run jobs requested by the application nodes. ALl the nodes will run on instances of Ubuntu 10.04, though they will have different packages installed. I have some familiarity with Chef from previous projects, though I don't consider myself an expert. In an effort to do due diligence, I have been investigating alternative possibilities. We have a number of folks in-house who are long-time Puppet users, and they have encouraged me to take a look. I am having trouble evaluating both choices, though. Chef and Puppet share many of the same domain terminology -- packages, resources, attributes, and so on, and they have a common history that stems from taking different approaches to the same problem. So in some sense they are very similar. But much of the comparison information I've found, like this article, is a little outdated. If you were starting this project today, what questions would you ask yourself to decide whether you should use Chef or Puppet for configuration management? (Note: I don't want answer to the question "Should I use Chef or Puppet?")

    Read the article

  • Need solution for Network/Servers.

    - by rehanplus
    Dear All, Please help me. I just joined a new Hospital and want some help managing my network. There are some requirements: Current Network: There is a D.S.L connection and that is terminated on a LINUX proxy and then connected to D-Link layer 2 switches and then providing internet to more then 200 PC's (Would be increasing to 1500 in couple of months). D-Link switches are not configured yet. Also there is one Database server Report server and an application server. In near Future Application should be accessed by local users as well as remote users from internet via our web server. We do have a sharing server and all these servers databases and PC's are on single sub net. Required Network: All i do want is to secure my network from outside access and just allowing specific users via web application and they will be submitting there record for patient card and appointment facility by means of application and entering there record (on our database) but not violating our network resources. Secondly in house users also need to access the same application and also internet but they must have some unique identity and rights (i.e. Finance lab dept. peoples do have limited access to that application). Notes: Should i create V LAN or break sub nets. Having a firewall will solve my issues? is a router needed on these type of scenario's. Currently all the access are restricted from Linux Proxy. Thanks.

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >