Search Results

Search found 48324 results on 1933 pages for 'how stuff works'.

Page 55/1933 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • Have to run auto-negotiate between clients and switch - "old" switch works fine - "new" switch results in "port flapping"?

    - by ConfusedAboutSwitching
    I need some help understanding a problem we're having at work: We run Altiris/Deployment Solution and have to use auto-negotiate between client systems and our switches (Altiris apparently requires this for imaging, PXE boot and other functions). We have several areas with old wiring (Cat 3 & Cat 5) that have old 10/100 Cisco switches in them - and we can set these systems up to "auto/auto" (auto-negotiate on both the NIC and the switch port), and everything has been working fine. But - our networking crew changed out a couple of old switches for 10/100/1000 Cisco switches, and now - they are claiming that "auto/auto" won't work because the switches can't auto-negotiate the way the old 10/100 switches did - and that if we try to set the new gig switches to auto-negotiate, the switch port starts "port flapping", and shuts the port down. But - if we put the old switch back in - they work using "auto/auto" just fine - no port flapping. The networking crew is telling me that the problem is that we're putting "new switches" on "old wire", and that the old cabling can't/won't support the auto-negotiation with these new switches....??? There's something about this that doesn't make sense to me - can someone explain this to me? Or is our networking crew just doing something wrong in the configuration of these new switches? While will the old switches work "auto/auto", but the new switches won't?? HELP!!....and Thanks!! M

    Read the article

  • Why does apache httpd tell me that my name-based virtualhosts only works with SNI enabled browers (RFC 4366)

    - by Arlukin
    Why does apache give me this error message in my logs? Is it a false positive? [warn] Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366) I have recently upgraded from Centos 5.7 to 6.3, and by that to a newer httpd version. I have always made my ssl virtualhost configurations like below. Where all domains that share the same certificate (mostly/always wildcard certs) share the same ip. But never got this error message before (or have I, maybe I haven't looked to enough in my logs?) From what I have learned this should work without SNI (Server Name Indication) Here is relevant parts of my httpd.conf file. Without this VirtualHost I don't get the error message. NameVirtualHost 10.101.0.135:443 <VirtualHost 10.101.0.135:443> ServerName sub1.domain.com SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!aNull:!EDH:!DH:!ADH:!eNull:!LOW:!EXP:RC4+RSA+SHA1:+HIGH:+MEDIUM SSLCertificateFile /opt/RootLive/etc/ssl/ssl.crt/wild.fareoffice.com.crt SSLCertificateKeyFile /opt/RootLive/etc/ssl/ssl.key/wild.fareoffice.com.key SSLCertificateChainFile /opt/RootLive/etc/ssl/ca/geotrust-ca.pem </VirtualHost> <VirtualHost 10.101.0.135:443> ServerName sub2.domain.com SSLEngine on SSLProtocol -all +SSLv3 +TLSv1 SSLCipherSuite ALL:!aNull:!EDH:!DH:!ADH:!eNull:!LOW:!EXP:RC4+RSA+SHA1:+HIGH:+MEDIUM SSLCertificateFile /opt/RootLive/etc/ssl/ssl.crt/wild.fareoffice.com.crt SSLCertificateKeyFile /opt/RootLive/etc/ssl/ssl.key/wild.fareoffice.com.key SSLCertificateChainFile /opt/RootLive/etc/ssl/ca/geotrust-ca.pem </VirtualHost>

    Read the article

  • After a period of time, nslookup still works, but pinging, and an auto-refeshed website, fails.

    - by Mark Hurd
    Contrary to this SO question this is for a dotted name (gw.localnet.au), and it doesn't happen straight away. Only after some period of time (quite a long time, possibly days). In fact this is for my ADSL router and its internal IP address which I have named within the router itself and in my Windows Server 2003 Domain Controller DNS Service. Specifically, localnet.au is a Active-Directory-backed primary domain. In fact, an ipconfig /flushdns may fix the problem, but only after a while (about the time it took me to type in this question :-) ). That doesn't explain the root cause though... Manually transferred from stackoverflow.com

    Read the article

  • ATI Radeon Drivers works with which linux distribution and version? [closed]

    - by amit.codename13
    I have ATI Mobility Radeon HD 5850 graphics card. Almost every new linux distribution seems to have an issue with it, when i install the drivers. Working without utilizing the graphics card leaves me so unproductive. So i made a plan to use older versions of linux, any distribution suitable as a desktop distribution. The problems that i am facing are, 1) After installing drivers the system boots and hangs, 2) There are unusual lines over the screen 3) After upgrade system doesn't start properly(hangs the usual old way) The kind of answers i am looking for is, distribution X(the newer the version the better) doesn't have the above problem after installing drivers for ATI Mobility Radeon HD 5850 graphics card. UPDATE: The new drivers released by AMD seems to fix all the issues, although they are still beta

    Read the article

  • I try to access a NFS mount via FTP. It works but the FTP Dir listing is very slow

    - by W0bble
    I mount an NFS using this command: mount -o rsize=8192,wsize=8192,timeo=14,intr serverip:/directory /mnt/directory However the mount appears on the client as expected a cmd like "ls -a" work pretty fast on the nfs mount. But when I try to list the mounted directory via FTP it gets very very slow ( 1.250 bytes in 160,39s (0,01KB/s) ). But surprisingly downloading files via FTP from nfs work with normal speeds. I tested several values for rsize and wsize parameter with no success. Both client and server are running Debian squeeze and NFSv4

    Read the article

  • Emails sent from Coldfusion using the same SMTP/Exchange server works from one machine but fails for another

    - by Peter Herdenborg
    First, apologies if this question is too vague or has too little information to really be answerable. I am not normally working with these issues, and I don't have full access to the environment. However, the hosting provider seems to have a hard time tracking down the issue, so I am hoping that someone can at least provide me with some qualified guesses about the most likely problem. Here goes: A client I work for has a hosted IT environment, based on virtual machines running Windows 2008 R2 Standard. Our website, based on Coldfusion 9 was recently migrated from one virtual machine to another, and though Coldfusion is configured in the exact same way, using the same SMTP server, i.e. the client's Exchange server hosted in the same environment and in the same AD as both web servers, sending emails to external recipients is no longer working. It is still working fine when testing from the old machine. This is what I've learnt so far (all emails are sent using a valid from-address on the client's domain): Emails sent to other recipients on the same domain are delivered without any problem. Emails sent to external recipients on other domains are never delivered. When sending emails to both internal and external recipients, no emails are delivered. When receiving one of these emails to an internal address, the sender is now indicated as "[email protected]", while when sent from the old machine, it used to say just "sender". This seems to me that it could hint that the Exchange machine "recognizes" the old web server while it is a stranger to the new. In Coldfusion's mail log, all messages appear to be successfully delivered to the SMTP server. Any ideas what settings to look at, what log entries to search for or how to compare the old web server with the new one will be highly appreciated.

    Read the article

  • Ubuntu maverick username and password works with ssh but not with smb when I connect from MacOS 10.6.5

    - by biomed
    I have an Ubuntu Maverick desktop that I can easily connect using ssh but when I want to see the shared directories using "go to server", MacOs connects to the Ubuntu machine and I can see the shared directories but when I enter my username and passord to get access it complains about me entering wrong username and/or password. Any ideas? What more information would you need to give me some advise? Is there a step by step how-to manual to get this done? thanks

    Read the article

  • How can one create a bootable linux usb key that works on Mac (Intel 64 bit CPU) hardware ?

    - by user3621
    Hi, I'm trying to create a bootable usb key with linux (debian) and that can be booted on Macintel hardware. I have read that MAC's EFI can only boot GPT GUID formatted disks. I'm desperately trying to find a good tutorial which explains how to create such a key. Here what I have done so far: create a GUID partition on te key using linux GNU parted create a HFS+ or ext3 partition on the key, with the boot flag on install a linux .iso with unetbootin While all steps were successfull and in some cases I could even boot on a PC, the step of booting on Macintel software failed (on a macbook). I need to precise that I holded the "alt" key while booting the mac and the only visible bootable disk was the hard disk. Thanks for any advice. PS: I have tried with rEFIt as well. In one case I had a "windows" icon but it then failed to boot with a message like "no system found"

    Read the article

  • What video format works both on Windows and all Apple products out-of-the-box?

    - by Seppo Silaste
    What format and encoding should I use for video that would play out-of-the-box on both Windows and all Apple products (iPad, iPhone, etc.)? I know that the correct way to render an animation, is to first render it as images, but this is overkill when rendering short animations of a work in progress for the client to comment on. I have one client that views the vids on Windows and another that views them on iPad and iPhone. I'm hoping I could render just one video instead of rendering in two different formats.

    Read the article

  • Compression for custom mime type works on IIS 7.5, but not IIS 7.0?

    - by Doogal
    I've managed to set up compression for a custom mime type on IIS 7.5 with no problem. Add the mime type to IIS then add it to the httpCompression element in applicationHost.config. But when I do the same thing on IIS 7, the particular mime type is never compressed. This isn't a problem with compression in general since other mime types are compressed correctly. As far as I can tell, IIS 7 and IIS7.5 are configured in exactly the same way. Does IIS7 behave differently and do I need to do something else to get it working? I've setup failed request tracing and get a NO_MATCHING_CONTENT_TYPE error during compression but I can't figure out what else I need to do to tell IIS about my mime type

    Read the article

  • Website with login: everything works. Website without login: menu items don't redirect to content

    - by user3660755
    I wanted to put the website online. I saw it still had a login screen. It needs to be accesible for everyone. unpublishing the module did not work. I checked the user access view and took the login url out of the template manager. After this the login screen was gone at the page. But when I click on any of the website menu items, it doesn't redirect to the content. When I do have the login screen and put in the username and password all the menu's work just fine. I checked the url it is the same with or without login. How is this possible? I have been asking a lot of people, but no ones seems to be able to give me a hint. I have been searching for the solution myself for more than a week, I just don't know anymore. My guess is that there must be a conflict in the redirection, but I am not skilled enough to recognize it I am affraid. Any tips would be more than welcome. Thank you

    Read the article

  • Nginx works on my linux machine but is not accessible from other computers in my local network

    - by crooveck
    In my LAN network I have a server with Scientific Linux (RedHat or Fedora based distro), I've done yum install nginx but the welcome page is not accessible from other computers in my network. When I do telnet open localhost 80 and then GET / HTTP/1.0 I get some html code from nginx, so it's running for sure. But when I want to connect remotly, doing telnet open 192.168.3.130 80 I get: Trying 192.168.3.130... telnet: Unable to connect to remote host: No route to host So I assume that there is something wrong with my network settings, maybe iptables or something else? Next step, I turned off iptables: service iptables stop and it helped, now I can connect remotely using telnet. So I think, I need to fix my iptables rules. I did some googling and found this rule -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT but it still didn't allow me to connect remotely when iptables is up. Can someone please help me setting a proper iptables configuration?

    Read the article

  • XP Filesharing works with IP's but not computer names.

    - by Luminose
    I recently ran into a problem where I was setting up a 5 person LAN. I enabled filesharing on the main computer and wanted to allow the other 4 computers to have access. 2 computers were able to access \expample without any issues. 1 computer would only connect if I uses the ip address \x.x.x.x\data. The third computer was able to access \example but required the user to login every time they tried to access the share. Why is there such inconsistency in these connections? All 5 computers are Windows XP Professional.

    Read the article

  • Apache mod_proxy_ajp and tomcat7 (TomEE). Telnet 8009 from localhost works, but from other machine connection refused

    - by exabrial
    In my tomcat config, I have the following: <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> Once I start tomcat, on that same box, I can telnet localhost 8009 and get a connection. However, on the load balancer, I cannot telnet to that port. I've disabled the firewalls on both boxes. I'm able to connect on port 8080. What gives???

    Read the article

  • Which tools you use for development in your company?…Please be exact [closed]

    - by predrag.music
    If you are a professional php/(my/postgre/?)sql/? developer and working in a professional team ... I would like to know which tools you use for development in your company. I do not care which tool is better or worse, but "which tools you use", if it is not a TOP SECRET :) For example, these are just some of the tools i/we use (first those used most (in general)): Pen, paper lots of cofee, cola ... let me think ... mmmm ... yeah more cofee :) All kinds of books (a lots of books) OS: Win / MacOS X Server: Hosted (CentOS )/ At work Mac OS X Dev server: XAMPP / MAMP / LAMP Editor: Notepad++ IDE: Netbeans / Zend Studio / Eclipse Version Control System: Mercurial / SVN FTP: Filezilla mostly / ... Passwords: KeePass js / ajax: jQuery / pure js / jQuery UI Framework:CI / Zend / pure php Database: MySQL / Other ORM: Framework layer db (Not an ORM I know but...) / Doctrine (2) / no ORM Debugging: Xdebug (PHP) / firebug (ajax/js/html/css/...) / framework profiler (stuff) / ... (x) Dreaming: About... Thinking: Not about chaos in ? direction .... n Anything else that comes to mind n+1 Zilion other stuff i know but i can't remember ... 8 some other stuff i (don't) remember i forgot, give up, delete, lost, said to myself never again, i haven't had time stuff, have on computer stuff but can't find or don't even know i have it on my computer at least 2-3 or more times, stuff I said to myself i'll check later and never checked again for all sort of "perfectly justified" reasons (time, memory, wife :), whatever,...), ... what is the reason i'm asking this?:) 8 and beyond looking forward to see a lot of answers ?

    Read the article

  • Best practice to collect information from child objects

    - by Markus
    I'm regularly seeing the following pattern: public abstract class BaseItem { BaseItem[] children; // ... public void DoSomethingWithStuff() { StuffCollection collection = new StuffCollection(); foreach(child c : children) c.AddRequiredStuff(collection); // do something with the collection ... } public abstract void AddRequiredStuff(StuffCollection collection); } public class ConcreteItem : BaseItem { // ... public override void AddRequiredStuff(StuffCollection collection) { Stuff stuff; // ... collection.Add(stuff); } } Where I would use something like this, for better information hiding: public abstract class BaseItem { BaseItem[] children; // ... public void DoSomethingWithStuff() { StuffCollection collection = new StuffCollection(); foreach(child c : children) collection.AddRange(c.RequiredStuff()); // do something with the collection ... } public abstract StuffCollection RequiredStuff(); } public class ConcreteItem : BaseItem { // ... public override StuffCollection RequiredStuff() { StuffCollection stuffCollection; Stuff stuff; // ... stuffCollection.Add(stuff); return stuffCollection; } } What are pros and cons of each solution? For me, giving the implementation access to parent's information is some how disconcerting. On the other hand, initializing a new list, just to collect the items is a useless overhead ... What is the better design? How would it change, if DoSomethingWithStuff wouldn't be part of BaseItem but a third class? PS: there might be missing semicolons, or typos; sorry for that! The above code is not meant to be executed, but just for illustration.

    Read the article

  • I need a decent alternative to c++ [closed]

    - by wxiiir
    I've learned php and c++, i will list the things i liked and didn't liked on each of them, how i decided to learn them in the first place and why i feel the need to learn a decent alternative to c++, i'm not a professional programmer and only do projects for myself. PHP - Decided to learn because i wanted to build a dynamic website, that i did and turned out very good, i even coded a 'not so basic' search engine for it that would display the results 'google style' and really fast, pretty cool stuff. PROS - Pretty consistent syntax for all stuff (minor caveats), great functionality, a joy for me to code in it (it seems to 'know' what i want it to do and just does it) CONS - Painfully slow for number crunching (which takes me to c++ that i only learned because i wanted to do some number crunching and it had to be screaming fast) C++ - Learned because number crunching was so slow in php and manipulating large amounts of data was very difficult, i thought, it's popular programming language and all, and tests show that it's fast, the basic stuff resemble php so it shouldn't be hard to pick up PROS - It can be used to virtually anything, very very fast CONS - Although fun to code at the start, if i need to do something out of the ordinary, memory allocation routines, pointer stuff, stack sizes etc... will get me tired really quick, syntax is a bit inconsistent some times (more caveats) I guess that from what i wrote you guys will understand what i'm looking for, there are thousands of languages out there, it's likely that one of them will suit my needs, i've been seeing stuff today and a friend of mine that is a professional programmer tried OCaml and Fortran and said that both are fast for numerical stuff, i've been inclined to test Fortran, but i need some more input because i want to have some other good 'candidates' to choose from, for example the python syntax seemed great to me, but then i found out from some tests that it was a lot slower than c++ and i simply don't want to twiddle my thumbs all day.

    Read the article

  • JQuery dynamic .load - works for 1 and not for the other??

    - by Alvin
    UPDATE: Site is online http://qwickqual.com/memorial/create/ under "Memoria Media" - Click on "Our Videos" and it loads the list of categories click on any sub category and it goes through the process below ---------------- end edit ---------------------------------- UPDATED DESCRIPTION OF ERROR: All code is based on <li> objects being linked If I click on an <li> from the Initial page load to load: section 1: I can click on an <li> to load sub-categories section 2: I then click on an <li>, the query is made server returns section 3, section is not loaded to screen / and callback function is skipped over perhaps someone has run into a similar issue before?? ---------------- end edit ---------------------------------- I've also added comments to the code I have a jquery function that is setup to load categorized lists of thumbnails. So far the function is in use in 3 location. Each of them generates HTML using the same template under django. The function works perfectly in 2 of the 3 locations, and I"m plain stumped as to why the 3rd won't work. Below is the complete set of relevant javascript, the page load HTML for the relevant section. And 2 examples of HTML that is loaded through the script, 1 of them works, 1 of them doesn't and both are loaded into the same page load HTML Any ideas what I'm missing here? Or information I need to add to help debug? Currently posting this to a live server to interact with, been local only till now... Error: Script works properly through all levels of title="our_photos" Script loads 1st level of title="our_videos" Script will not load sub-category of title="our_videos" Example: From HTML below: Click on Script will query the server properly: GET http://localhost%3A8000/memorial/media%5Ftype/our%5Fvideos/4/ Script will not load the returned HTML into the #select_media div scopeChain: [Call, Call multi=false uri=/memorial/media_type/our_videos/, Window # 0=Call 1=Call 2=window] relative vars: label = "our_videos" wrapper = "media" uri = "/memorial/media_type/our_videos/" multi = false Javascript <script type="text/javascript"> // this piece is where I'm having trouble in the grand scheme of things // label = piece of class tag // wrapper = tag to load everything inside of // uri = base of the page to load // multi = not relevant for this piece but needed to pass on to next function function img_thumb_loader(label, wrapper, uri, multi) { if(!(wrapper)) { wrapper = label } $('.'+label+'_category').click(function () { // show the loading animation $('div#'+wrapper+'_load').show(); // get var of current object type = $(this).attr('title') || ''; // load it into the screen - this is the error // when I click on an <li> from section 2 below it will query server // (Tamper data & server see it - & return section 3 below // But will not load into the screen on return // also skips over the callback function $('#select_'+label).load(uri+type+'/', '', function() { $('div#'+wrapper+'_load').hide(); $('input.img_'+label+'_field').each(function() { img = $(this).attr('value'); $('li#img_'+label+'-'+img).css('selected_thumb'); }); img_thumb_selected(label); window[label+'_loader'](); }); }); $('.img_'+label).click(function () { if($(this).hasClass('selected_thumb')) { $(this).removeClass('selected_thumb'); id = $(this).attr('title'); $('.img_'+label+'_selected[value="'+id+'"]').remove(); } else { if(!(multi)) { previous = $('.img_'+label+'_selected').val(); $('#img_'+label+'-'+previous).removeClass('selected_thumb'); $('.img_'+label+'_selected').remove(); } $(this).addClass('selected_thumb'); id = $(this).attr('title'); $('#select_'+wrapper).after('<input class="img_'+label+'_selected" id="img_'+label+'_field-'+id+'" type="hidden" name="imgs[]" value="'+id+'" />'); } }); img_thumb_selected(label); } function img_thumb_selected(label) { $('.img_'+label+'_selected').each(function() { current = $(this).val(); if(current) { $('#img_'+label+'-'+current).addClass('selected_thumb'); } }); } function media_type() { $('.media_type').click(function () { $('#media_load').show(); type = $(this).attr('title') || ''; $('#select_media').load('/memorial/media_type/'+type+'/', '', function() { $('#select_media').wrapInner('<div id="select_'+type+'"></div>'); $('#select_media').append('<ul class="root_link"><h3><a class="load_media" onclick="return false;" href="#">Return to Select Media Type</a></h3></ul>'); load_media_type(); $('#media_load').hide(); window[type+'_loader'](); }); }); } media_type(); function load_media_type() { $('.load_media').click(function () { $('#media_load').show(); $('#select_media').load('{% url mem_media_type %}', '', function() { $('#media_load').hide(); media_type(); }); }); } function our_photos_loader() { img_thumb_loader('our_photos', 'media', '{% url mem_our_photos %}', true); } function our_videos_loader() { img_thumb_loader('our_videos', 'media', '{% url mem_our_videos %}', false); } </script> HTML - Initial Page load <fieldset> <legend>Memorial Media</legend> <div style="display: none;" id="media_load" class="loading"/> <div id="select_media"> <ul style="width: 528px;" class="initial"> <li title="your_photos" class="media_type"><div class="photo_select_upload"><h3>Your Photos</h3></div></li> <li title="our_photos" class="media_type"><div class="photo_select"><h3>Our Photos</h3></div></li> <li title="our_videos" class="media_type"><div class="video_select"><h3>Our Videos</h3></div></li> </ul> </div> </fieldset> HTML - Returned from Click on section 1 this section can make calls to subcategories and it will work <br class="clear" /> <ul class="thumb_sub_category" style="width: 352px;"> <li id="our_photos_category-29" class="our_photos_category" title="29"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/stuff_004_thumbnail.jpg);" class="thumb"><span></span></span> <p>Birds 1</p> </div> </li> <li id="our_photos_category-25" class="our_photos_category" title="25"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/dsc_0035_thumbnail.jpg);" class="thumb"><span></span></span> <p>Dogs 1</p> </div> </li> </ul> HTML - Returned from click on Section 2 Having trouble with sub-categories from this area <br class="clear" /> <ul class="thumb_sub_category" style="width: 528px;"> <li id="our_videos_category-1" class="our_videos_category" title="1"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/forest-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 1</p> </div> </li> <li id="our_videos_category-3" class="our_videos_category" title="3"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 3</p> </div> </li> <li id="our_videos_category-4" class="our_videos_category" title="4"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-3_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 4</p> </div> </li> </ul> HTML that fails to load inside - Section 3 <br class="clear" /> <ul class="thumb_sub_category" style="width: 528px;"> <li id="our_videos_category-1" class="our_videos_category" title="1"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/forest-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 1</p> </div> </li> <li id="our_videos_category-3" class="our_videos_category" title="3"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-1_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 3</p> </div> </li> <li id="our_videos_category-4" class="our_videos_category" title="4"> <div> <span style="background-image: url(/site_media/photologue/photos/cache/mountain-3_thumbnail.jpg);" class="thumb"><span></span></span> <p>Video 4</p> </div> </li> </ul>

    Read the article

  • Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

    - by Lucas
    I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

    Read the article

  • ViewContext.RouteData.Values["action"] is null on server... works fine on local machine

    - by rksprst
    I'm having a weird issue where ViewContext.RouteData.Values["action"] is null on my staging server, but works fine on my dev machine (asp.net development server). The code is simple: public string CheckActiveClass(string actionName) { string text = ""; if (ViewContext.RouteData.Values["action"].ToString() == actionName) { text = "selected"; } return text; } I get the error on the ViewContext.RouteData.Values["action"] line. The error is: Exception Details: System.NullReferenceException: Object reference not set to an instance of an object. Any help is appreciated. Thanks in advance.

    Read the article

  • Sensor Manager getOrientation, doesnt display text and only works in debug mode?

    - by Aidan
    Hi Guys, My code appears to crash. I'm trying to setup a SensorManager for getting the Orientation of the device. I also have a listener that should update when conditions change. But when I run this code it crashes... public void sensor(){ // Locate the SensorManager using Activity.getSystemService sm = (SensorManager) getSystemService(SENSOR_SERVICE); sm.getOrientation(mR, mOrientation); // Register your SensorListener sm.registerListener(sl, sm.getDefaultSensor(Sensor.TYPE_ORIENTATION),SensorManager.SENSOR_DELAY_NORMAL); } private final SensorEventListener sl = new SensorEventListener() { @Override public void onAccuracyChanged(Sensor sensor, int accuracy) { } @Override public void onSensorChanged(SensorEvent event) { if (event.sensor.getType()==Sensor.TYPE_ORIENTATION) { Global.Orientation = "Orientation is equal to: "+ SensorManager.getOrientation(mR, mOrientation); } } sm is defined as SensorManager sm; as a class wide variable also. I've got some other classes outputting the Orientation to a screen which I know works. The problem is somewhere in these methods. Am I doing it wrong or Is there a better way of doing this?

    Read the article

  • JSF Custom EL function works only on the first load of the page.

    - by jsfQ
    I created a ( JSP-based) custom EL function to use in the rendered tag. The function will return a boolean to decide if a page component needs to be rendered on a page or not. I import it onto the jsp page using <%@ taglib uri = "/WEB-INF/mine.tld" prefix = "g" %. Everything works perfect on the first load of the jsp page. Once a button is clicked, the form submits and then I am getting errors like 'No ClassLoaders found for: the class which implements my EL function' and 'Function not found'. What is going on here? What will be a fix?

    Read the article

  • Using listpreference and getting the key works but no ok button...

    - by Allan
    I'm using listpreference in my android app and getting my key values and all is well and works good (now that you guys have helped me) BUT - when my listpreference menus popup, they only contain a cancel button. Let's say the user is choosing between red, blue, and green. When the listpreference dialog first pops-up, the dialog only shows a cancel button. Because of that, the dialog disappears as soon as the user selects their choice. I would like it so that when the user chooses their setting, they see the radio button get highlighted and then they go ahead and click the ok button...but I don't have an ok button and can't figure out why. Any help would be awesome...al

    Read the article

  • Hosting a WCF service in a Windows service. Works, but I can't reach it from Silverlight.

    - by BaBu
    I've made me an application hosted WCF service for my Silverlight application to consume. When I host the WCF service in a forms application everything works fine. But when I host my WCF service in a windows service (as explained brilliantly here) I get the dreaded 'NotFound' Web Exception when I call it from Silverlight. The 'WCF Test Client' tool does not complain. I'm' exposing a decent clientaccesspolicy.xml at root. Yet Silverlight won't have it. I'm stumped. Anybody have an idea about what could be going on here?

    Read the article

  • "Use of undefined constant CURLOPT_PROTOCOLS and CURLPROTO_HTTP" but it works?

    - by Dave
    Hi on our dev environment we have show all errors, warnings and notices. I'm getting this: Notice: Use of undefined constant CURLOPT_PROTOCOLS - assumed 'CURLOPT_PROTOCOLS' in C:\notion\implementation\development\asterix\library\ExternalLibs\panda.php on line 69 Notice: Use of undefined constant CURLPROTO_HTTP - assumed 'CURLPROTO_HTTP' in C:\notion\implementation\development\asterix\library\ExternalLibs\panda.php on line 69 The code on line 69: curl_setopt($curl, CURLOPT_PROTOCOLS, CURLPROTO_HTTP); But the CURL code works, it goes off to the other server and retrieves whats necessary. What do these notices mean? Thanks very much.

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >