network state - Page 55

Howt to grant network access to LocalSystem account?

- by Ian Boyd

How do you grant access to network resources of the LocalSystem (NT AUTHORITY\SYSTEM) account? When accessing the network, the LocalSystem account acts as the computer on the network: ...and acts as the computer on the network. Or to say the same thing again: The LocalSystem account acts as the computer on the network: When a service runs under the LocalSystem account on a computer that is a domain member, the service has whatever network access is granted to the computer account, or to any groups of which the computer account is a member. How does one grant a "computer" access to a shared folder and files? Note: Computer accounts typically have few privileges and do not belong to groups. So how would i grant a computer access to one of my shares; considering that "Everyone" already has access? Note: workgroup

Read the article

Configure VPN to access remote LAN network on Windows7

- by PiotrK

Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

Read the article

cannot access my own computer through My Network Places

- by vgv8

My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

Read the article

Domain Computers Not Listed In Network

- by Giawa

Our network computers are all connected to a domain, and I can see them if I search the active directory (I can click 'search active directory' and then select 'computers' and then Find Now, and all of the computers will appear). However, the computers are not listed in the network browser on any of our computers (Win XP, Win7, Linux, etc) which are connected to the domain. DC is running Windows Server 2008 (Windows Server Standard) with a configured DNS and DHCP server. All of the IPs on our local network are static IPs, although I can't see how that would make a difference. I can still connect to computers on the network via \\computer_name, but I cannot browse them in 'network' or in 'my network places'. The computer browser service is not started on the DC, but I tried starting that and it had no effect. DC currently has the firewall configured as 'off' to try to debug this problem. Thanks in advance

Read the article

Where is debian storing its network settings?

- by user13743

I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

Read the article

MySQL timeout only from office network to remote server, but other connections are fine

- by Adam

I've been developing these apps just fine on a local machine as has my co worker. We recently moved our work desks so we're now on a different floor of the building, but we only have one router that we're connected to. Since then, connecting to this one server appears to timeout more often than not. Occasionally I get through, and the loading is instantaneous. Anyhow we have these connections that were tested 1. my computer -> office network -> php pdo -> mysql server A - timeout 2. my computer -> office network -> mysql cli -> mysql server A - timeout 3. my computer -> office network -> mysql cli -> mysql server A - timeout 4. another pc -> office network -> mysql cli -> mysql server A - timeout 5. my computer -> mobile network -> mysql cli -> mysql server A - ok 6. my computer -> office network -> ssh server A -> mysql server A - ok 7. my computer -> office network -> ssh server B -> mysql server A - ok 8. server B web app -> php pdo -> mysql server A - ok 9. my computer -> office network -> php pdo -> mysql server B - ok 10. my computer -> office network -> mysql cli -> mysql server B - ok This has really stumped me.

Read the article

How to enable RDP to a Server 2008 R2 on another network? VM network

- by Saariko

I have a W2008 R2 installed on a different network (I am on 192.168.0.x - new server on 192.168.3.x) I had trouble ping and RDP to it. I disabled the firewall to test the connection: and that opened the ping feature but I still can not RDP to that machine. the allow remote access is enabled As per sinni80 idea - Here is the error message The networks are divided by a Fortigate 60-B router - 2ndy interface for the gateway is 192.168.3.254 (and pingable from all) any to any rule on both networks is in place. As per Joe Schmoe idea - I am able to RDP to 192.168.3.1 from 192.168.3.3 (which is on the same network) Data to add: - The servers are on a VM host, each of the servers has 2 nics one is DHCP enabled into the 192.168.0.x network 2nd is static IP in the 192.168.3.x -- Further information: The network 192.168.0.x - are on a domain network (active Directory) The network 192.168.3.x - are grouped in a workgroup What should I check more please?

Read the article

VMware virtual network adapters and Windows Firewall

- by anonymous

I am running VMware Workstation 7.1.4 on Windows 7 Enterprise SP1-U (x64). Aside from the physical network adapter, I have created a single virtual network adapter (VMware Virtual Ethernet Adapter for VMnet1) which is connected to (can be seen by) the host and the guests. My problem is, even after applying the "*NdisDeviceType = 1" tweak to the virtual adapter, making it disappear from the Network and Sharing Center, I still can't connect to programs running in the host from the guests, unless I specifically "allowed the program to communicate with the public network" using the Windows Firewall (which I don't want to do). This happens to all the programs and services running in the host (File and Printer Sharing, Database server, HTTP proxy, etc.) I am getting the impression that applying the "*NdisDeviceType = 1" tweak only hides a network from the Network and Sharing Center but not actually making it private. Any hints and suggestions?

Read the article

cannot access my own computer through My Network Places

- by WebMAOhist

My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

Read the article

Remove a known network from Windows 8

- by Edward Brey

When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

Read the article

Linux and Windows machines sharing a network

- by Saif Bechan

I have different Windows and Linux machines that share an internal private network. From within this network I can SSH to every machine etc. This internal network works great. I have my main windows machine from where I control these machines either trough SSH or virtual desktop. Is there a way for me on my main machine to see all the machines that are connected to the network. I want to be able to see all the machines and maybe browse them, share files etc. I am very new to networking of this kind so any recommendations are welcome. Should I set up this network by workgroup? I do not think Linux supports that. Or should I set up the network with domain, I never did that before.

Read the article

Network Password Recovery

- by sneakyV

I am trying to recover a password for my network. It's set up like this: a network of computers, and a central server which authenticates login-passwords entered, and is also a network share. Username looks like administrator@abc. I tried to recover the password hashes from the individual CPUs, they gave this : FAFEA8FAF0D8D61FAAD3B435B51404EE. This decodes to GAGCAU and a null hash after. This password does not work for logging in to the network. Is there a way to recover the password for the network share from a non-admin network account? Thanks in advance.

Read the article

How to optimize neural network by using genetic algorithm?

- by Billy Coen

I'm quite new with this topic so any help would be great. What i need is to optimize a neural network in MATLAB by using GA. My network has [2x98] input and [1x98] target, i've tried consulting matlab help but im still kind of clueless about what to do :( so, any help would be appreciated. Thanks in advance. edit: i guess i didn't say what is there to be optimized as Dan said in the 1st answer. I guess most important thing is number of hidden neurons. And maybe number of hidden layers and training parameters like number of epochs or so. Sorry for not providing enough info, i'm still learning about this.

Read the article

How can I get network speed in Windows Mobile?

- by songxiang

How can I get network speed in Windows Mobile?

Read the article

Accessing Password Protected Network Drives in Windows in C#?

- by tkeE2036

Hi Everyone, So in C# I am trying to access a file on a network, for example at "//applications/myapp/test.txt", as follows: const string fileLocation = @"//applications/myapp/test.txt"; using (StreamReader fin = new StreamReader(FileLocation)) { while(!fin.EndOfStream()){ //Do some cool stuff with file } } However I get the following error: System.IO.IOException : Logon failure: unknown user name or bad password. I figure its because I need to supply some network credentials but I'm not sure how to get those to work in this situation. Does anyone know the best way (or any way) to gain access to these files that are on a a password protected location? Thanks in advance!!

Read the article

When will a TCP network packet be fragmented at the application layer?

- by zooropa

When will a TCP packet be fragmented at the application layer? When a TCP packet is sent from an application, will the recipient at the application layer ever receive the packet in two or more packets? If so, what conditions cause the packet to be divided. It seems like a packet won't be fragmented until it reaches the Ethernet (at the network layer) limit of 1500 bytes. But, that fragmentation will be transparent to the recipient at the application layer since the network layer will reassemble the fragments before sending the packet up to the next layer, right?

Read the article

how to configure IP cam to stream using right network card?

- by robin hood

I have IP cam that supports RTSP streaming. It's connected to router with 2 network cards with IP1 and IP2 addresses. I make 2 connections to IP cam by IP1 and IP2 addresses from the same IP and I need to receive corresponding streams thru correct network card, but both streams (RTP over UDP) go thru IP1. How this can be resolved? I don't know if RTSP server binds UDP sockets to corresponding IP and I don't know what IP stack is in IP cam (weak end system or strong end system). I haven't found anything interesting in router configuration. As I understand, routing table cannot help me cos I'm connected from the same IP, is it right? Also Sorry for incomplete info but it's all I have at the moment. Thanks for your time.

Read the article

Neural network input data, cartesian plane x/y coordinates, correlate with Handwriting.

- by Sam

I very curious about making a handwriting recognition application in a web browser. Users draw a letter, ajax sends the data to the server, neural network finds the closest match, and returns results. So if you draw an a, the first result should be an a, then o, then e, something like that. I'm don't know much about neural networks. What kinda data would I need to pass to the NN. Could it be an array of the x/y coordinates where the user has drawn on a pad. Or what type of data is the neural network expecting or would produce the best results for handwriting?

Read the article

Intel Dual Band Wireless-AC 7260 keeps dropping wifi

- by Rick T

My wifi Intel Dual Band Wireless-AC 7260 keeps dropping wificonnection drops and the network to which I was connected disappears from the list of available networks in network manager. The only way to fix it is to disable wifi and re-enable it How can I fix this. I'm using ubuntu 14.04 64bit. It mostly drops connections on the 5ghz network. My other devices don't drop connections over wifi. see logs and versions rt@simon:~$ uname -a Linux simon 3.13.0-34-generic #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux rt@simon:~$ rt@simon:~$ dmesg | grep iwl [ 3.370777] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 3.381089] iwlwifi 0000:03:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm [ 3.414637] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 3.414695] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.414913] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S rt@simon:~$ cat /var/log/syslog | grep -e iwl -e 80211 | tail -n25 Aug 14 08:13:02 simon kernel: [ 3.452780] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:13:02 simon kernel: [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Aug 14 08:13:06 simon NetworkManager[1125]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi) Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): using nl80211 for WiFi device control Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Aug 14 08:13:06 simon kernel: [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:13:06 simon kernel: [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:14:18 simon kernel: [ 81.230162] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:14:18 simon kernel: [ 81.232330] cfg80211: World regulatory domain updated: Aug 14 08:14:18 simon kernel: [ 81.232332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:14:18 simon kernel: [ 81.232333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232334] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232335] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:02 simon kernel: [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:02 simon kernel: [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:18 simon kernel: [ 621.223905] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:23:18 simon kernel: [ 621.228945] cfg80211: World regulatory domain updated: Aug 14 08:23:18 simon kernel: [ 621.228950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:23:18 simon kernel: [ 621.228954] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228956] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228961] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228963] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

Read the article

Repeated disconnects on WPA PEAP network

- by exasperated

My school has a WPA PEAP network with GTC inner authentication. I am able to connect to the network, but once I load a website or two, the network become unresponsive (i.e. in Chromium, it gets stuck at "Sending request"), and I'm eventually disconnected. Any help will be greatly appreciated. Here's some log output. I can provide more if needed: Ubuntu 13.04 3.8.0-32-generic x86_64 lsusb: 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) lsmod: iwldvm 241872 0 mac80211 606457 1 iwldvm iwlwifi 173516 1 iwldvm cfg80211 511019 3 iwlwifi,mac80211,iwldvm dmesg: [ 3.501227] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 3.503541] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 [ 3.527153] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 3.527162] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 3.527170] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 3.527178] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 3.527186] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [ 3.527192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [ 3.527240] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.551049] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 375.153065] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 375.159727] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 375.553201] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 375.559871] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 1892.110738] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 1892.117357] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5227.235372] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5227.242122] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5817.817954] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5817.824560] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5824.571917] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 5824.571929] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5824.571935] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 6956.290061] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6956.296671] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 6963.080560] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6963.080566] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 6963.080570] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 7613.469241] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 7613.475870] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 7620.201265] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 7620.201278] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 7620.201285] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8232.762453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8232.769065] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 8239.581772] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8239.581784] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8239.581792] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [13763.634808] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [13763.641427] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [16955.598953] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [16955.605574] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 lshw: *-network description: Wireless interface product: Centrino Advanced-N 6235 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 24 serial: b4:b6:76:a0:4b:3c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-32-generic firmware=18.168.6.1 ip=10.250.169.96 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f7c00000-f7c01fff iwlist scan: Cell 02 - Address: 24:DE:C6:B0:C7:D9 Channel:36 Frequency:5.18 GHz (Channel 36) Quality=29/70 Signal level=-81 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000004ff3fe419b Extra: Last beacon: 27820ms ago IE: Unknown: 0009436174436861743278 IE: Unknown: 01088C129824B048606C IE: Unknown: 030124 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : 802.1x IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1624001B000000FF000000000000000000000000000000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: DD1A00904C3424001B000000FF000000000000000000000000000000 Cell 04 - Address: 24:DE:C6:B0:C3:E9 Channel:149 Frequency:5.745 GHz Quality=28/70 Signal level=-82 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000181f60e19c Extra: Last beacon: 28680ms ago IE: Unknown: 0009436174436861743278 IE: Unknown: 01088C129824B048606C IE: Unknown: 030195 IE: Unknown: 050400010000 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : 802.1x IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1695001B000000FF000000000000000000000000000000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: DD1A00904C3495001B000000FF000000000000000000000000000000 IE: Unknown: DD07000B8601040817 IE: Unknown: DD0E000B860103006170313930333032 Cell 09 - Address: 24:DE:C6:B0:C0:29 Channel:149 Frequency:5.745 GHz Quality=39/70 Signal level=-71 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=00000112fb688ede Extra: Last beacon: 27716ms ago ifconfig (while connected): wlan0 Link encap:Ethernet HWaddr b4:b6:76:a0:4b:3c inet addr:10.250.16.220 Bcast:10.250.31.255 Mask:255.255.240.0 inet6 addr: fe80::b6b6:76ff:fea0:4b3c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:230023 errors:0 dropped:0 overruns:0 frame:0 TX packets:130970 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:255999759 (255.9 MB) TX bytes:16652605 (16.6 MB) iwconfig (while connected): wlan0 IEEE 802.11abgn ESSID:"CatChat2x" Mode:Managed Frequency:5.745 GHz Access Point: 24:DE:C6:B0:C0:29 Bit Rate=6 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0

Read the article

How to use rhythmbox-client on LAN?

- by Kaustubh P

A few days ago I had asked this question, and according to one suggestion, used rhythmote. It is a web-interface to change songs on a rhythmbox playing on some PC. However, its not what I had thought of, and I stumbled upon documentation for rhythmbox-client. I tried a few ways of using it, but was unsuccessful. Let me show you a few ways of how I did it. The rhythmbox is running at address 192.168.1.4, lets call it jukebox. Passing the address as a parameter Hoping that I would be able to see and browse through songs on the jukebox rhythmbox-client 192.168.1.4 But, I get this message (rhythmbox-client:8370): Rhythmbox-WARNING **: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (rhythmbox-client:8370): Rhythmbox-WARNING **: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. SSH ssh -l jukebox 192.168.1.4 rhythmbox-client --print-playing Which spat this at me: (rhythmbox-client:9389): Rhythmbox-WARNING **: /bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed. rhythmbox-client as root gksudo rhythmbox-client 192.168.1.4 A rhythmbox client comes up, but with no music shown in the library. I am guessing this is running on my own computer. Can anyon tell me how rhythmbox-client is to be run, and is it even correct of me to think that I can get a rhythmbox window showing the songs on the jukebox? PS: There were a few other solutions mentioned, but I want to evaluate each and every one of them. Thanks.

Read the article

WPA2 authentication fails using USB network devices (Linksys and Rosewill)

- by Greg Youtz

Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

Read the article

Network really slow with TL-WN951N wireless card

- by Sam

I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

Read the article

Trouble installing Server 12.10 - Dead keyboard, Blank Screen, Network Config

- by Mikey

Installing 12.10 server from cd - minimal installation: basic system, ssh server,postgreSQL, manual updates. Hardware is brand new HP server that also runs Win 2003 Server Standard as a DNC excellently - I installed the grub boot manager on the primary partition and it is working fine - can boot to Win or Ubuntu without issue. Everything seemed to go OK on the installation - BUT when I restarted the system after install and booted to Ubuntu, I got the command prompt for Ubuntu, but the keyboard was UNREPSONSIVE - dead. There is nothing wrong with the keyboard - works fine if I boot to Win. With a completely unrepsonsive keyboard I had to hit the power switch - when I restarted and booted to Ubuntu, Ubuntu started but no command prompt came up at all - just black screen. I powered down and rebooted to advanced Ubuntu options - it tried to reinstall/initliaze a long list of packages - when it got to 'waiting for network configuration' it waited, then a message 'waiting 60 seconds for network configuration'... it waited 60 seconds and then I got a 'failed to configure network message' and it continued. Finally it finished, I hit enter and got to a prompt - but again, keyboard UNREPSONSIVE - dead. I went through this several times - tried 'repairing broken installation' option and also reinstalling entirely - always same results. I am flummoxed. The only clue I have is that for the Windows DNC config, the IP address is static - not via DHCP. But I don't think that should impact Ubuntu at all - perhaps I am mistaken. What is wrong?

Read the article

Sitemap structure for network of subdomains

- by HaCos

I am working on a project that's a network of 2 domains (domain.gr & domain.com.cy) of subdomains similar to Hubpages [each user gets a profile under a different subdomain & there is a personal blog for that user as well] and I think there is something wrong with our sitemap submission. Sometimes it takes weeks in order a new profiles to get indexed. We make use of one Webmasters account in order to manage all network and we don't want to create different accounts for each subdomain since there are more than 1000 already. According to this post http://goo.gl/KjMCjN, I end up on a structure of 5 sitemaps with the following structure : 1st sitemap will be for indexing the others. 2nd sitemap for all users profile under the domain.gr 3nd sitemap for all users profile under the domain.com.cy 4th sitemap for all posts under the *.domain.gr - news sitemap http://goo.gl/8A8S9f 5th sitemap for all posts under the *.domain.com.cy - news sitemap again Now my questions: Should we create news sitemaps or just list all post in 2nd & 3rd sitemap? Does links ordering has anything to do? Eg: Most recent user created be first in sitemap or doesn't make any different and we just need to make sure that lastmod date is correct? Does anyone guess how Hubpages submit their sitemap in Webmasters so maybe we could follow there way? Any alternative or better way to index this kind of schema? PS: Our network is multi language - Greek & English are available. We make use of hreflang tags on the head of each page to separate country target of each version.

Search Results

Search found 27336 results on 1094 pages for 'network state'.

Page 55/1094 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62 | Next Page >

- by Ian Boyd

- by PiotrK

- by vgv8

- by Giawa

- by user13743

- by Adam

- by Saariko

- by anonymous

- by WebMAOhist

- by Edward Brey

- by Saif Bechan

- by sneakyV

- by Billy Coen

- by songxiang

- by tkeE2036

- by zooropa

- by robin hood

- by Sam

- by Rick T

- by exasperated

- by Kaustubh P

- by Greg Youtz

- by Sam

- by Mikey

- by HaCos

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62 | Next Page >