Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 55/370 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • Media server...serving files...............for a limited time only

    - by Craig
    I’m new to Ubuntu and am seeking help with a media server I have built. I have a couple of HTPCs in my house running XBMC. I wanted to build one for the family room working double duty as a HTPC, and media server to share movies, TV shows, music, etc. on my Windows network. So using some spare old parts I had lying around I decided to go CRAZY and build my first Linux box. I used Ubuntu because it seemed to be the most user friendly variant, especially for people that are new to Linux. I had to do a few things to get the media files shared properly on my network: Made sure my two media drives auto-mount every time I boot the computer by editing the “fstab” file – “sudo nano /etc/fstab” Installed Samba - “sudo apt-get install samba” Set a password for Samba - “sudo smbpasswd –a USERNAME” Edited the Samba configuration file to make sure the computer was in my networks workgroup – “sudo nano /etc/samba/smb.conf” In the file manager (not sure if that’s the right name for it), I right-clicked my media folders and set the sharing and permissions. The sharing was done without guest access, and permissions were set to; Owner, Group, and Others - Access: Create and Delete Files. Adjusted the Power Management settings to never put the system into sleep mode. I checked to see if I had access to the files from a Windows 7 machine and I did (Woo Hoo!). But when I tried to play any of my video files from the Windows machine (using VLC media player), they would only play for about 2-5 minutes and then they would stop with an error message saying that the file could not be accessed (Booo...). I tried playing some files through XBMC running in Windows and they worked for a bit longer (about 10-15mins), but they also stopped playing. I installed the Linux version of XBMC on the server and played the files locally with no problems. It doesn’t seem to be an issue with the files themselves, it seems to be a sharing problem on my network. So my question to the Ubuntu gurus out there is: Did I miss adding/editing something in the Samba configuration file? Did I use the right method to share my media files (file manager vs. using the terminal)? Is it possible for the computer to still go to sleep without the screen going black (does that even make sense?). Are there any special settings in Ubuntu that I should be using since this computer as a media server (is there a media server mode?...!...?). Any help on this matter would be greatly appreciated. Thanks

    Read the article

  • Slow wifi with D-link DWA-160 A2

    - by Tommy Brunn
    I recently bought a USB wifi adapter for my new desktop computer. It's a D-link DWA-160 A2. From the start it didn't want to work at all, but after unplugging and then plugging it back in, it seems to work. However, my browsing is painfully slow. NetworkManager reports the connection to be at around 78-85% signal strength, which seems perfectly acceptable. Is there anything I can do to make it faster? I'm dual booting with Windows 7, where it seems to work fine, so I'm guessing that the problem occurs because of crappy drivers.

    Read the article

  • Connectify Dispatch Links Multiple Network Nodes Into a Mega Connection

    - by Jason Fitzpatrick
    Connectify Dispatch wants to change the way you interact with the networks around you by making it dead simple to mesh all available Wi-Fi, Cellular, and Ethernet connections into a massive and stable pipeline. Dispatch makes it open-and-click easy to hook up multiple Wi-Fi nodes, your cellphone, and even Ethernet connections into a single blended connection. While the video above gives a great overview of the process, check out the video below to see it in real world action: The project is currently in the last phase of KickStarter funding, so now is a great time to score Connectify Dispatch at a steep discount–pledging as little as $10 to fund the project, for example, scores you 50% of a 6-month Pro license. Hit up the link below to read more about the project, check the KickStarter status, and see all the neat features in the development pipeline. Dispatch: The Internet, Faster. [KickStarter] HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

    Read the article

  • Create an ad-hoc connection that looks like a wifi connection from a router

    - by James
    I have a Vizio tablet (running a modified version of Android 2.3.2) which, for some reason or another, refuses to list Windows ad-hoc wifi connections on it's wifi connection screen. It can connect to wifi networks served from a normal router, but the wireless bit of my home router is broken, so I'd like to share the internet connection through my laptop's wifi card until the new router arrives. Is it possible to create an ad-hoc network in Ubuntu that looks like a normal wireless network to my tablet?

    Read the article

  • Unable to connect to the Internet via LAN despite the connection showing as established

    - by Vikram
    I have installed Ubuntu 11.10. I am facing a problem connecting via LAN. We have a firewalled network. After entering static IP, gateway, DNS, etc., it shows connection as established but we are unable to use the Internet using the wired connection (LAN). While checking system testing following error shows under network test: ERROR:root:Could not find def gateway info in /proc ERROR:root:Could not find default gateway by running route

    Read the article

  • Jquery website is not opening in UBUNTU but in XP, Everything is fine

    - by Raman Sethi
    I know it is weird, But I just discovered this, jquery.com is not opening in my ubuntu firefox or other KDE browser and hence many sites that copy codes from code.jquery.com also hanged. Is there any solution to this problem. I have found the problem It is actually with the DNS servers I am using, Google DNS, 8.8.8.8 and 8.8.4.4, whenever I use these DNS in ubuntu my system stop responding to some sites, actually they are connected nicely, but the request end up in waiting.. I dont understand why...??? I checked my DNS with cat /etc/resolv.conf Even after using Google DNS, it is showing DNS servers I received automatically after connecting to the service provider. I am connecting using Network Manager, not using DNS I provided but using the default one. Any Solution??

    Read the article

  • Can't get Broadcom 43142 drivers to work after installation on 5420 Inspiron

    - by beckett
    I'm a complete newbie to ubuntu, I've already installed and reinstalled the Broadcom driver required done a numerous amount of steps on terminal but I can't seem to get wireless working. However, my wired connection seems to work just fine. also I have tried to follow the instructions but get stuck at step number 2 when i get told "No package dpkg is available": 1) Download the file from the link 2) sudo yum install dpkg 3) mkdir BCM43142 4) dpkg-deb -x Downloads/wireless-bcm43142-dkms-6.20.55.19_amd64.deb BCM43142 5) cd BCM43142/usr/src/wireless-bcm43142-oneiric-dkms-6.20.55.19~bdcom0602.0400.1000.0400/src/wl/sys 6) sudo yum install kernel-devel kernel-headers 7) vi wl_linux.c 8) around line 43, remove the line include 9) save the file (:wq) 10) cd ../../.. 11) make Things should work, and you'll have a file called "wl.ko" in the current directory. 12) sudo yum remove broadcom-wl 13) sudo mkdir -p /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 14) sudo cp wl.ko /lib/modules/3.5.2-3.fc17.x86_64/extra/wl 15) sudo depmod -a 16) sudo modprobe wl I really need help :/

    Read the article

  • Dirt Cheap Bi-Directional Antenna Wirelessly Extends Your LAN

    - by Jason Fitzpatrick
    If you’re looking for an effective way to link remote LANs without the hassle of laying cable, this DIY bi-directional antenna is a quick (and cheap) method for bringing internet access to outbuildings and other locations. Tinker Danilo Larizza needed to share internet access between apartments that are relatively close together but not hardwired–ruling out simply sharing the access via existing LAN infrastructure. His solution combines a simple scrap wire antenna array mounted inside a plastic food bin (seen here with the cover removed to show the antenna) and some coaxial cable to link the antenna to two routers. Our favorite part about his build is that he constructed the pair to establish if the antenna setup would even work in his location and intended to buy commercial antennas if it did; his Tupperware models worked so well, however, they’re now the permanent solution. Hit up the link below for more information about the project. 2.4 Ghz Directive Biquad Antenna [via Hack A Day] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

    Read the article

  • Can't connect to hidden network with BCM4313

    - by poomerang
    The wireless works fine with all the other wi-fi nets I have tried, the only problem is with this hidden network. I should add it's the only hidden network I've tried, so I am not sure if the problem is it being hidden or somethings else, but I've checked the settings of NetworkManager against another Ubuntu system (which can connect) and they appear to be the same, passphrase included. The network is using WPA2 Personal with AES encryption, I don't know how to check this setting but I believe it's the usual for WPA2, and therefore usually not a problem. Also, I can connect through ethernet, which should exclude any blacklisting of my device, I believe. I usually use brcmsmac drivers, I've tried also STA but the result is the same. I've also tried the suggestion from Unable to connect to hidden SSID with no luck output of lspci -v is 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Askey Computer Corp. Device 7175 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

    Read the article

  • No internet access when I'm connect to my company's VPN

    - by Iago
    I googled my problem and I've read some questions in Ask Ubuntu, but I didn't solve my problem. I connect to a PPTP VPN server and it works well, but when I'm connected to that VPN I don't have Internet access but private network access. If I check "Use this connection only for resources on its network", I have Internet access, but this way I haven't access to my company's private network. What's the problem? Help, please.

    Read the article

  • Ask HTG: Disabling Windows Startup Programs, Using DNS Names on Your Home Network, and Restoring a Vintage Keyboard

    - by Jason Fitzpatrick
    Once  a week we round up some of the answers we’ve sent out to readers and share them with everyone. This week we’re looking at removing programs from the Windows startup routine, using DNS names on the local network, and restoring a vintage keyboard. HTG Explains: Do You Really Need to Defrag Your PC? Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone How To Migrate Windows 7 to a Solid State Drive

    Read the article

  • Best way to implement mouse-based movement in MMOG

    - by fiftyeight
    I want to design an MMO where players click the destination they want to walk to with their mouse and the character moves there, similar to Runescape in this manner. I think it should be easier than keyboard movement since the client can simply send the server the destination each time the player clicks on a destination. The main thing I'm trying to decide is what to do when there are obstacles in the way. It's no problem to implement a simple path-finding solution on the client, the question is if the server will do path-finding as well, since it'll probably take too much Computation power from the server. What I though is that when there is an obstacle the client will send only the first coordinate it plans to go to and then when he gets there he'll send the next coordinate automatically. For example if there is a rock in the way the character will decide on a route that is made of two destinations so it goes around the rock and when it arrives at the first destination it sends the next coordinate. That way if the player changes destination is the middle he won't send unnecessary information. Is this a good way to implement it and is there a standard way MMOGs usually do it? EDIT: I should also mention that the server will make sure all movements are legal and there aren't any walls in the way etc. In the way I wrote it should be quite easy since all movements will be sent in straight lines so the server will just check there aren't any obstacles along that line.

    Read the article

  • How to set multiple nameservers in /etc/resolv.conf which sticks on reboot?

    - by chrone
    Ubuntu 14.04 Server edition only displays "nameserver 127.0.0.1" in "/etc/resolv.conf" on each reboot if the dns-nameservers in "/etc/network/interfaces" contains 127.0.0.1 and some other DNS such as Google Public DNS. On /etc/network/interfaces I set as follows: dns-nameservers 127.0.0.1 8.8.8.8 But after a reboot, /etc/resolv.conf gives me this: nameserver 127.0.0.1 Shouldn't the "nameserver 8.8.8.8" listed in the /etc/resolv.conf too? Thanks in advanced.

    Read the article

  • 12.04, nvidia-settings makes one of my dual monitors grey and useless, disables network

    - by Kerrick
    I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

    Read the article

  • Why is wireless slow with Atheros AR9285?

    - by Luke
    I know there are many posts like this, however none of the fixes I have found have worked. I had the issue on 11.04, and after having no luck fixing it decided to try 12.04 however this has not fixed the problem. I'm using a Lenovo IdeaPad, the network card is a Atheros Communications AR9285. edit add outputs: sudo iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"NETGEAR-PLOW" Mode:Managed Frequency:2.437 GHz Access Point: E0:91:F5:7D:1B:BA Bit Rate=65 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:77 Invalid misc:63 Missed beacon:0 eth0 no wireless extensions. lspci -nnk | grep -iA2 net 06:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Lenovo Device [17aa:30a1] Kernel driver in use: ath9k -- 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 Thanks

    Read the article

  • More information about worldwide nodes how to get?

    - by Aubergine
    The context: Six hosts across worldwide were traced over week from UK. Ten thousands of lines to be parsed and analysed. And then I try to find any clue of geographical information and path - from where it jumps where. Then after Austria or Germany(each time different) I have mysterious 62.208.72.6 which in GEO LOC gives me Falklands Islands (which is where my target host is by the way, but before target host I still have 5 other nodes) Then I do whois for this 62.208.72.6 route: 62.208.0.0/16 descr: DE-ECRC-62-208-0-0 origin: AS1273 mnt-by: CW-EUROPE-GSOC source: RIPE # Filtered Why it says Europe now? How to understand this enigma code? I want to confirm more or less whether this is in europe or in falkland islands? But it can't be in FK yet as after next two hosts I get New York? Could you also tell me what does this CW-EUROPE-GSOC abbreviation means. (To preserve your sanity better not google, unless you already know it :-D) And the actual whois for the destination/target host, which completely destroys my head: route: 195.248.193.0/24 descr: HORIZON descr: Cable and Wireless Falkland Islands descr: Via Cable and Wireless Communications UK origin: AS5551 mnt-by: AS5551-MNT source: RIPE # Filtered How is it Via Cable and Wireless Communications UK if two nodes before I was in New York? Thank you guys,

    Read the article

  • How to write a network game? [closed]

    - by Tom Wijsman
    Based on Why is so hard to develop a MMO?: Networked game development is not trivial; there are large obstacles to overcome in not only latency, but cheat prevention, state management and load balancing. If you're not experienced with writing a networked game, this is going to be a difficult learning exercise. I know the theory about sockets, servers, clients, protocols, connections and such things. Now I wonder how one can learn to write a network game: How to balance load problems? How to manage the game state? How to keep things synchronized? How to protect the communication and client from reverse engineering? How to work around latency problems? Which things should be computed local and which things on the server? ... Are there any good books, tutorials, sites, interesting articles or other questions regarding this? I'm looking for broad answers, but specific ones are fine too to learn the difference.

    Read the article

  • Printing to a printer connected to a wireless router

    - by mspencer
    I have a Netgear WNDR4500 wireless router which allows me to print wirelessly to a printer connected to it via a USB cable. However, the software used to print to it only works for Windows and OS X. I've seen the question Printing to a printer attached to a network USB hub, and tried the instructions it gave using my router's IP address, but when I print a test page it says copying data then says printer is in use. In the printer queue window it says not connected. How can I print to the printer using Ubuntu? Thanks.

    Read the article

  • Yoga Pro 2 Wi-Fi not working

    - by user293004
    I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

    Read the article

  • Can't connect to or see my wifi ssid

    - by ant
    Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

    Read the article

  • Problem connecting to isp server using xl2tpd as client. Ubuntu server 13.04

    - by Deon Pretorius
    I have followed guides found on google and ubuntu support pages and can get xl2tpd connection up but only under the following conditions: 1 - ADSL model must be configured and connected to the ISP or 2 - ADSL modem in bridge mode I must have an existing PPPoe connection established. If neither of the above are active xl2tpd wont trigger pppd and connect to the isp and thus tunnel connection fails to connect to the L2TP server of the ISP. Am I doing something wrong; /etc/ppp/options.l2tpd.axxess ipcp-accept-local ipcp-accept-remote refuse-eap refuse-chap require-pap noccp noauth idle 1800 mtu 1200 mru 1200 defaultroute usepeerdns debug lock connect-delay 5000 name (name used for ppp connection) /etc/ppp/pap-secrets # * password (name used for ppp connection as above) * (ppp password supplied by isp) /etc/xl2tpd/xl2tpd.conf [global] ; Global parameters: auth file = /etc/xl2tpd/l2tp-secrets ; * Where our challenge secrets are access control = yes ; * Refuse connections without IP match debug tunnel = yes [lac axxess] lns = 196.30.121.50 ; * Who is our LNS? redial = yes ; * Redial if disconnected? redial timeout = 5 ; * Wait n seconds between redials max redials = 5 ; * Give up after n consecutive failures hidden bit = yes ; * User hidden AVP's? length bit = yes ; * Use length bit in payload? require pap = yes ; * Require PAP auth. by peer require chap = no ; * Require CHAP auth. by peer refuse chap = yes ; * Refuse CHAP authentication require authentication = yes ; * Require peer to authenticate name = BLA85003@axxess ; * Report this as our hostname ppp debug = yes ; * Turn on PPP debugging pppoptfile = /etc/ppp/options.l2tpd.axxess ; * ppp options file for this lac /etc/xl2tpd/l2tp-secrets # Secrets for authenticating l2tp tunnels # us them secret # * marko blah2 # zeus marko blah # * * interop * vzb_l2tp (*** secret supplied by isp) ^ isp server host name Any help will be greatly appreciated

    Read the article

  • How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working on a MSI Z87-GD65?

    - by Travis Allen
    So I literally just built my first computer from scratch and I can't get the network card to work as I've gathered it requires getting some drivers somehow.. Motherboard : MSI Z87-GD65 CPU : Intel Haswell i7 Ubuntu Ver : 12.04 Using the on-board network port Please help I'm about to start crying into my keyboard over this (not really). Any info would be greatly appreciated, also please be very specific as to what I have to do as I have not used Ubuntu very much so talk to me like a child, I won't take offence. Also I've already tried following the instructions here : How do I get a Qualcomm Atheros Killer E2200 gigabit ethernet card working? I don't know if I'm just retarded or am missing something

    Read the article

  • Problems connecting to eduroam wifi - ubuntu touch

    - by Fiona Cox
    I am trying to connect to our university's eduroam wi-fi network with my Nexus 4 running Ubuntu touch (utopic latest build), but can't get past the first stage. I wonder if anyone can help please? I am following these instructions (which worked for my iPhone): http://www.st-andrews.ac.uk/itsupport/mobile/eduroam/ But when I go to the bandit.st-andrews.ac.uk/connect page then follow the link to 'eduroam setup' I get the error message: Authorization Required This server could not verify that you are authorised to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required. Apache/2.2.16 (Debian) Server at bandit.st-andrews.ac.uk Port 443 (Clearly it's the latter option (browser) as I haven't been asked for my credentials yet.) Is there a way round this, or am I just not going to be able to connect until further down the Ubuntu touch development road... Thanks!

    Read the article

  • Direct X-forwarding

    - by Sean Houlihane
    I'm struggling to set up X-forwarding between 2 different machines on my local network and my ubuntu desktop. I'm able to connect using ssh x-forwarding one one machine, but the other machine (a Qnap TS-219P II) seems to have a less functional build of SSH on it, and I'd rather use a simpler approach. I've set $DISPLAY, and done 'xauth list $DISPLAY' on the desktop, then 'xauth add ' on the remote machine. From the remote machine, I just get xterm xterm Xt error: Can't open display: 192.168.0.4:0.0 Now, oddly, if I connect via ssh -X, there is a different magic cookie for the tunnelled port (but neither seems to work). I'm wondering if there is a port which needs to be enabled to permit X connections from the LAN? If so, how? The proper solution might be to re-build all the packages which are preventing X-forwarding from working on my QNAP machine, but lets assume for the purposes of this question that I've tried building enough packages on that architecture already and want to run X without the overhead of encryption.

    Read the article

  • Trying to configure samba share with office server

    - by tomphelps
    Hi, i'm trying to set up fstab to automatically connect to my office shared server. I'm undoubtedly doing something silly here as the username and password and server name work fine in the first code snippet below, just not the second - any help would be appreciated! The following command works as expected... tom@tom-desktop: sudo /usr/bin/smbclient -L Server.local -Uguest Enter guest's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.10] Sharename Type Comment --------- ---- ------- Lacie Disk Disk macosx Server Disk macosx IPC$ IPC IPC Service (Server) ADMIN$ IPC IPC Service (Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.10] Server Comment --------- ------- ACER-9D60040D10 SERVER Server Workgroup Master --------- ------- WORKGROUP ACER-9D60040D10 But when i add the following line to /etc/fstab, i get this error: cifs_mount failed w/return code = -22 //Server.local/Server /media/maguires cifs username=guest,password=password 0 0

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >