Search Results

Search found 2466 results on 99 pages for 'vmware vmdk'.

Page 55/99 | < Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >

  • Poor NFS Performance: OpenFiler

    - by Safin09
    Good Day Everyone, I have an issue with OpenFiler, a Linux-based operating that converts a computer system into a SAN/NAS appliance. Here is the problem. In my environment we have two Netapp Storevault 500 appliances that I normally perform backups to a NFS share. There are two backup cronjobs that use ghettoVCB to backup two groups of VM's. One group is a pool of 3 VMs. This takes 13 mins to complete. A second job that backups a pool of 5 VMs to a 2nd Storevault appliance which takes 2 hours. We then installed Openfiler on a old server that has 2 core Xeon processors. There is a software RAID 5 process in place. When performing the same backups to a NFS Openfiler share, the first backup job, which takes 13 mins, takes around 4 hours. The second backup job, which takes 2 hours, takes almost 10 hours to complete. This is unacceptable!!!! Especially considering the strain placed on the host ESX Server. I assumed that because of the software RAID 5, the overhead on the CPU explained the long backup times. I then installed Openfiler on a 2nd server, an IBM x306 machine which has a P4 Intel processor. This time no software RAID or any RAID at all. A single 750GB hard drive that contained the OS and the rest of the disk uses to backup VMs to a NFS share. I performed the first backup job of the pool of 3 VMs. This time the backup job took 1 and 1/2 hours to complete instead of 13 mins!!!!!!!!!! Is Openfiler simply poor at being an NFS Server!!!!!!!!!!!!! Has anyone else had these issues with Openfiler?

    Read the article

  • Can you run Snow Leopard Server on a VM?

    - by Crash893
    I'm thinking of buying a mac mini server for my email needs (small office server for 999 with all the features i want build in) I wanted to give it a test drive before i commit so i was thinking "hey this sounds like the perfect job for a vm" however i havent been able to see any examples of running snow lepoard server on a vm does anyone know if its possible and/or there is a premade vm package to test it out with?

    Read the article

  • Windows Terminal Server: occasional memory violation for applications

    - by syneticon-dj
    On a virtualized (ESXi 4.1) Windows Server 2008 SP2 32-bit machine which is used as a terminal server, I occasionally (approximately 1-3 event log entries a day) see applications fail with an 0xc0000005 error - apparently a memory access violation. The problem seems quite random and only badly reproducable - applications may run for hours, fail with 0xc0000005 and restart quite fine or just throw the access violation at startup and start flawlessly at the second attempt. The names of executables, modules and offset addresses vary, although a single executable tends to fail with same modules and the same memory offset addresses (like "OUTLOOK.EXE" repeatedly failing on module "olmapi32.dll" with the offset "0x00044b7a") - even across multiple user's logons and with several days passing without a single failure inbetween. The offset addresses seem to change across reboots, however. Only selective executables seem affected by the problem, although I may simply not be seeing a sufficient number of application runs from the other ones. I first suspected a possible problem with the physical machine's RAM, but ruled this out as a rather unlikely cause - the memory comes with ECC and I've already moved the virtual machine across several times, without any perceptable change. I've seen that DEP was enabled in "OptOut" mode on this machine: C:\Users\administrator>wmic OS Get DataExecutionPrevention_SupportPolicy DataExecutionPrevention_SupportPolicy 3 and tried changing the policy to OptIn via startup options: bcdedit.exe /set {current} nx OptIn but have yet to see any effect - I also would expect Outlook 12 or Adobe Reader 9 (both affected applications) to play well with DEP. Any other ideas why the apps may be failing?

    Read the article

  • Trouble virtualizing application under Windows 7

    - by vtimmerm
    Hi, I'm trying to virtualize an application for Windows 7 but am running into trouble: Application will run fine in Windows 7 if installed in the base. When it is virtualized, it will run on XP, but not on Windows 7. I have tried this in three ways: Captured on XP with ThinApp 4.0 Captured on XP with ThinApp 4.5 Captured on Windows 7 with ThinApp 4.5 Even when captured on Windows 7, it will not run on Windows 7 but will run on XP. When captured with a rival product, Altiris SVS, the virtualized app runs fine on Windows 7. Any idea what could cause this behaviour? Looking at the trace file, you see that they are different right from the start when comparing Windows 7 and XP tracefiles. What could cause it to go in completely different directions? (And why does the tracefile on Windows 7 say: Operating System Unknown? Does everybody have that on Windows 7 even with 4.5?) The error message is: "Object variable or with block variable not set".

    Read the article

  • Nexus 1000v VEM fails on 2 out of 8 hosts.

    - by cougar694u
    I have 8 ESXi hosts. I do a fresh install from the installable CD directly to 4u1. We have another 2-node cluster with a working Nexus 1000v primary & secondary. Everything's up and running. I installed 6 hosts and everything worked great, migrated them to the Nexus DVS, and VUM installed the modules. I did the 7th host, and when I tried to migrate it to the DVS, it failed with the following error: Cannot complete a Distributed Virtual Switch operation for one or more host memebers. DVS Operation failed on host , error durring the configuration of the host: create dvswitch failed with the following error message: SysinfoException: Node (VSI_NODE_net_create) ; Status(bad0003)= Not found ; Message = Instance(0): Inpute(3) DvsPortset-0 256 cisco_nexus_1000v got (vim.fault.PlatformConfigFault) exception Then, I tried to do host 8, and got the exact same problem. It worked about 15 minutes prior when I did host 6, nothing changed, then went to host 7 and it failed. If I try to remediate either of these two hosts, either patches or extensions, it fails. Anyone else have these problems?

    Read the article

  • NAS4Free disk encryption and ZFS error

    - by MiNT
    I have installed a NAS4Free on a VM, and as recommended, i installed it on a 1GB virtual disk, and assigned another disk 500GB to this VM for file storage. I have created the disk, encrypted it, created a ZFS virtual disk, and then a ZFS storage pool. Everything was working. On every restart of this VM i needed to go on and mount the encrypted drive. Recently i upgraded the host machine, and now i cant mount or make it work. I have tried removing everything and setting up from scratch everything, with the exception of formating the disk, i have used an encrypted one without formating it. Does anybody have any suggestion on how can i at least get back my data, can i mount somehow the encrypted drive even in another utility, just need to get back the data that were on it.

    Read the article

  • Monitor LSI 3ware raid controller on ESXi

    - by aseq
    This concerns a server that runs ESXi (v. 4.x or 5.x) installed on drives that are configured into a raid10 using an LSI 3ware 97050 raid controller. I would like to know if there is a way to monitor the LSI 3ware series of controllers, in particular the 9750, through ESXi. And to hopefully also run the monitoring daemon LSI provides. I know you can set up a cronjob to execute tw_cli through ssh on the ESXi server. However that's not really ideal. I am not using vcenter by the way. It would be nice to have more than just monitoring working, since the 3ware software has a very useful web client, besides tw_cli.

    Read the article

  • Can single ESXi host make use of two separete iSCSI box?

    - by user71061
    Hi! I have problem with using multiply iSCSI targets with single ESXi host (in my case they are two FreeNAS hosts, but I suspect that this problem will occur with any two iSCSI box of that same type/model). If I configure two FreeNAS hosts as iSCSI targets (say iSCSI A and iSCSI B), then I can use both of them with my ESXi host, but only one at a time (i.e only iSCSI A or only iSCSI B, but not both of them simultaneously). If I try to add second iSCSI target to my iSCSI adapter (of course it has unique iqn name), then in a details pane of this adapter (it is iSCSI software adapter), I see that total number of paths has increased accordingly, but not total number of devices (so I can't use it as another storage). What should I do? It is impossible to attach two iSCSI targets to single adapter? I'm using free version of ESXi 4.1. Maybe it is an limitation of free version? Thanks in advance for any sugestion.

    Read the article

  • Setup link aggregation and jumbo frames on VMware ESXi 4

    - by Sysadminicus
    I'm setting up an ESXi 4 server to connect to an NFS datastore. I'd like to bond two of the NICs together and use jumbo frames for the NFS connection on a private (non-management) network. I setup a new switch with the 2 NICs and am able to connect to the NFS share over it, but could use some guidance on getting jumbo frames and link aggregation/bonding/teaming working.

    Read the article

  • OVF Tools error

    - by ToreTrygg
    Hello all, I am trying to use OVF tools 1.0 to create an .ovf appliance split to 4gbs. When I run the following command: ovftool --chunkSize=4gb vi://:@/?ds= e:\test\test.ovf everything starts off fine. It will got for about 15-16% then I get this message: "Error: unable to get NFC ticket for target disk". I have looked online, but cannot find anything that matches this problem. I am using Windows 2k3 as the ovf creation server, and I'm in a ESX 3.5 environment. The ovf must be split into 4gb chunks (or less) so they can be put onto DVDs. Also, when it is done it deletes the files it started to create. Any help would be greatly appreciated.

    Read the article

  • OOM-Killer, jboss and kernel panic

    - by user32425
    Hi, We are running RedHat 3.4.6(x32) on VMWareEsx3.5(x64) with 6GB RAM. A few java processes(including jboss) are running in the background. The problem is that the java processes consume lots of memory, and sometimes they are killed by the OOM-killer. When OOM-killer is about to act, the free physical memory is very low 100MB-200MB, but the swap is not used (99% free). Sometimes this causes a kernel panic too. So why isn't the swap used? How to investigate this kernel panic? Is using 6GB memory on 32bit Redhat wise? Thanks

    Read the article

  • Windows activation on a Virtual Machine (Physical->VM)

    - by Daisetsu
    I backed up a number of laptops to virtual machines before they are to be re-purposed, in case I need the data at some later time. While the Physical to VM processes worked fine I am encountering issues on some of the VMs. When I boot them I get an error message saying I MUST activate windows in order to login. This is expected because the hardware changed (from physical hardware to virtualized hardware). I click the OK button and expect to be prompted with ways to activate, windows sits there for quite a while then tells me that "Windows has already been activated". I click OK at that message and get take back to the beginning where I am asked to activate Windows. I have done some fairly intensive googling but haven't been able to find a real solution. EDIT: The laptops with the issues are 2 Sony Vaios, I believe that they have the OEM version of the OS originally installed by the factory.

    Read the article

  • Windows Server 2008R2 Virtual Lab Activation strategies?

    - by William Hilsum
    I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

    Read the article

  • iSCSI targets don't appear after rescan

    - by asmr
    Hi everybody, I have an Equallogic 4000PS SAN box to which I have connected 2 x ESX 4.0.0 hosts sharing the LUNs. I have an older ESX 3.5 host which I want to setup to share the same LUNs. I have setup a vmkernel port with 2 NICs attached to 2 the iSCSI switch. When I perform an iSCSI software adapter rescan, it takes a long time and it doesn't find the targets. In the ESX-3.5 host's log file I find these messages: Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.394 cpu5:1039)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.394 cpu5:1039)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.394 cpu5:1039)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.397 cpu0:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.397 cpu0:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.397 cpu0:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.442 cpu1:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.442 cpu1:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:52:48 sc59 vmkernel: 368:19:23:11.442 cpu1:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.874 cpu3:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.874 cpu3:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.874 cpu3:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.884 cpu4:1041)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.884 cpu4:1041)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.884 cpu4:1041)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.888 cpu3:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.888 cpu3:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:32.888 cpu3:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.042 cpu7:1039)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.042 cpu7:1039)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.042 cpu7:1039)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.044 cpu3:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.044 cpu3:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.044 cpu3:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.045 cpu4:1041)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.045 cpu4:1041)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:09 sc59 vmkernel: 368:19:27:33.045 cpu4:1041)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.308 cpu3:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.309 cpu3:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.309 cpu3:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.598 cpu2:1040)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.598 cpu2:1040)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.598 cpu2:1040)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.600 cpu7:1039)WARNING: SCSI: 279: SCSI device type 0xd is not supported. Cannot create target vmhba1:288:0 Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.600 cpu7:1039)WARNING: SCSI: 1293: LegacyMP Plugin could not claim path: vmhba1:288:0. Not supported Mar 30 08:57:10 sc59 vmkernel: 368:19:27:33.600 cpu7:1039)WARNING: ScsiPath: 3187: Plugin 'legacyMP' had an error (Not supported) while claiming path 'vmhba1:C0:T288:L0'.Skipping the path. Any ideas what the problem is?

    Read the article

  • Cleanup datastore

    - by minWi
    Hi folks!, I'm trying to find "orphaned" files in my datastore, not only from orphaned vms but also other files (ie. sample files, isos, anything). Is there any powershell script or something to do that? (find -mtime works, but it's not the right way) I'm using ESX3.5 Thanks!

    Read the article

  • Why is the vSphere console view so slow?

    - by blade
    Hi, Why is the Console view on the vSphere client so slow? It's a real shame because it's a shame to have to establish an RDP session every time you work on one of the VMs because of the speed of the console (I saw a tool to right click and open an RDP session to a VM in vSphere Client/ESX but this was not reliable). The Workstation console view is very smooth so I'd expect the vSphere Client console view to be very smooth. Thanks

    Read the article

  • How to SSH to guest ubuntu OS in vmplayer4

    - by Grace
    I have installed vmplayer4.0.4 on Windows7, and install ubuntu12.04 as Guest OS. Basically i have two problems: Default vmplayer use NAT for network access. I could ping the guest OS from the Host OS. But how could i access the Guest OS from outside the Host OS? If i change to Bridged Mode, sure the Guest Ubuntu OS could get DHCP ip in the same subnet as Host OS. But i could not ping the Guest OS from the Host OS, or vice versa, even if i disable the iptables firewall on Ubuntu Guest OS like following: iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT I could not figure it out, could anyone help on this issue? Thanks in advance.

    Read the article

  • iSCSI SAN Implementation with several ESXi hosts and two Equallogic SANs

    - by Sergey
    I work for a small state college. We currently have 4 ESXi hosts (all made by Dell), 2 EqualLogic SANs (PS4000 and PS4100) and a bunch of old HP Procurve switches. The current setup is very far from being redundant and fast so we want to improve it. I read several threads but get even more confused. The Procurve Switches are 2824. I know they don't support Jumbo Frames and Flow Control at the same time, but we have plans to upgrade to something like Procurve 3500yl. Any suggestions? I heard Dell Powerconnects 6xxx are pretty good but I'm not sure how they compare to HPs. There will be a 4-port Etherchannel (Link Aggregation) between the switches, and all control modules on SAN will be connected to different switches. Is there anything that will make the setup better? Are there better switches then Procurves 3500yl that cost less than 5k? What kind of bandwidth can I expect between ESXi hosts (they will also be connected to 2824 with multiple cables) and SANs?

    Read the article

  • Moving windows-2003 hdd into virtual machine - with HDD shrink

    - by jm666
    Before you vote to close as exact duplicate, please read the full question. I was already read: Can I make a virtual machine out of a Windows XP physical machine? Disk2vhd,convert my PC to Hyper-V Virtual Machine Creating a Windows Virtual PC image from a Physical machine physical machine to virtual machine and place into VirtualBox BSOD trying to migrate Windows XP from a physical to a virtual machine http://en.wikipedia.org/wiki/Physical-to-Virtual and all other similiar questions here and several external sites too Unfortunately, don't find answer for my problem. I have an physical machine with 500GB HDD, on what is installed old Windows-2003 server with one server application. The application is like the windows itself, too old, no support for it today, haven't installation media and so on.. ;( On the HDD it is used only approx. 100MB (maybe less when will delete all unnecessary files). Want convert the the machine into the VirtualBox, and the VirtualBox should run on the same machine. Is possible to do this with the next steps? I can attach another HDD (via USB or internally) Boot an live Linux from CD, mount HDDs Run "something" on the Linux (the above wikipedia article have many pointer for the SW) for the conversion and store the image on the USB HDD - unfortunately, many of tools uses some specialty what exists in Windows-XP and above. No informations about Windows-2003 server, so what is an working solution for Windows-2003? try boot the virtual image with VirtualBox when it will run ok, remove the old installation, install Linux on the old 500GB hdd, copy the image and run.. The above should works (i hope), but the problems: i currently have only 320GB external USB hdd. (ofc, i can remove it from a box and enter it as internal HDD too) so, for the conversion I looking for the on the fly HDD shrink, so while moving the physical 500GB HDD need shrink it into smaller HDD - as i told above, only 100MB is used Exists something for this? (free) - or the only way is buying and larger 1TB hdd and using it for the conversion? Another question are: is anybody have real experience with windows-2003 conversion into VirtualBox? Looking for an answer from someone who really doing it and can figure out real pitfalls. (googling can do myself). exists here better approach for the solution?

    Read the article

  • ISA 2006 Ent with NLB configuration

    - by Nagori
    Hello We have created to virtual machines and installed ISA 2006 Ent and enable NLB configuration, each machine has two NIC one connected to LAN and other connected to DMZ, we are not able to ping DMZ subnet IP of ISA from another machine which is on same DMZ subnet even though we have diable the all ISA services (including firewall). But we can ping LAN IP from all our internal subnets and this ping is working with ISA services are started or stop status Thank you

    Read the article

  • No compatible network card

    - by sbintcliffe
    Motherboard: Asus K8N-E Deluxe with onboard NIC (nVidia nForce) Secondary NIC: I've tried using a standard NIC (Device Manager displays this as D-Link DFE-538TX 10/100, but under manufacturer in the General tab of the properties in Windows it states Realtek Semiconductor Corp.) I have downloaded ESXi 4.0.0 build 208167 and cooked to disc. I've booted from it, the .TGZ modules load from the yellow and grey screen, the progress bar reaches to about 60% and like a second later the screen changes and I have the following information on screen; "No compatible network adapter found. Please consult the HCG." I've checked the HCG and found that my motherboard is listed. I also get the same message with the secondary NIC. Any ideas please?

    Read the article

  • Can't login to just installed view administrator

    - by matarvai81
    Hi, we are starting to test View for our purposes. I have created new test enviroment, new vdidemo active directory, new virtual center etc... I just installed view connection server component to new server and trying to do initial configuration, but when trying to log in I get following error " Error accessing the View Administrator. Contact the system administrator" Log file says following error 08:14:08,925 INFO LoginBean User administrator has failed to authenticate to View Administrator What is causing this problem? How can I log in and start to test VDI?

    Read the article

  • Esx servers in a DMZ

    - by James
    I have two ESX 3.5 servers in a DMZ. I can access these servers on any port from my lan via a VPN. Servers in the DMZ are unable to initiate connections back to the lan, for obvious reasons. I have a vCenter server on my lan and can initially connect to the esx servers fine. However the esx servers then try to send a hearth beat back to the vCenter server on udp/902 obviously this will not get back to the vCenter server, which then marks the ESX servers as not responding and disconnects. There are two broad solutions I can think of; 1) Try to tell vCenter to ignore not getting heart beats. The best I can do here is delay the disconnect by 3 mins. 2) Try some clever network solution. However again I am at loss. Note: The vCenter server is on a lan, and cannot be given a public IP, so firewall rules back will not work. And also I cannot setup a VPN from the DMZ to the lan. **I am adding the following, explanation that I added to the comments Ok maybe this is the bit that I not explaining well. The DMZ is on a remote site, an entirely independent network (network 1). The vCenter server is on our office lan (network 2). Network 2 can connect to any machine on any port on network 1. But network 1 is not allowed to initiate a connection to network 2. Any traffic destined to network 2 from network 1 gets dropped by the firewall as it is traffic to a non-routable address. The only solution I can think of is setting up a VPN from network 1 to network 2, but this is not acceptable So any clever folk out there any ideas? J

    Read the article

  • arp problems with transparent bridge on linux

    - by Mink
    I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

    Read the article

  • Web based console connections not working in Windows 7 posted: Jan 20, 2010 8:55 AM

    - by nmeth
    For slightly complicated reasons we tend to give people console access to VMs via the webui. This has worked fine in the past, however when the users update their client machines to Windows 7 (or Vista, I am told, although I have not tested that), then the console fails to work. On IE8, having allowed the ActiveX control, the tab causes a "Internet Explorer has stopped working" dialog. On Firefox 3.5 , once the plugin has been installed, using the console causes the browser to crash. I've updated to the most recent VC 2.5 release, and ESX 3.5u5. Anyone else seeing this? Any clues how to get round it (other than using the fat client). Nigel.

    Read the article

< Previous Page | 51 52 53 54 55 56 57 58 59 60 61 62  | Next Page >