Search Results

Search found 19279 results on 772 pages for 'everything'.

Page 550/772 | < Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >

• Apache Virtualhost entry with Windows hostname

  - by gshauger

  I have a Windows Domain Controller and we use it for DNS for our internal network. I have an Ubuntu box with an IP address of 172.16.34.149. Within the Windows DNS I created the forward and reverse lookup entries for the name Endymion. Naturally when ever I FTP/SSH/HTTP/etc to the hostname Endymion it resolves correctly to my Ubuntu box. I wanted to do some web development on this box for an existing site. There were problems when I placed the website in a subfolder of /var/www/. Let's just say it was in folder /var/www/projectx/. The issue involved the incorrect resolution of non-relative urls. So I figure I could create a new DNS entry for the hostname projectx. Sure enough when I FTP/SSH/HTTP/etc to the hostname projectx it takes me to the same ubuntu box as the hostname Endymion...this is what I would expect. I now have two hostnames for the same box. I then create a Virtualhost entry in httpd.conf that looks like the following: <VirtualHost *:80> DocumentRoot /var/www/projectx ServerName projectx ServerAlias projectx </VirtualHost> Sure enough when I go to a browser and type in http://projectx/ it takes me to the correct subfolder. Everything works!!! Not so fast. I then go to http://endymion/ and instead of taking me to /var/www/ it takes me to /var/www/projectx/ Clearly I'm missing something. Help please! ;)

  Read the article

• How do I speed up and cache mmap file access over NFS on Linux?

  - by Zan Lynx

  The server and client are both 64-bit Ubuntu 10.04 LTS. The application in question is a custom app that uses mmap() for fast random file access. Its ideal state is when the entire file is cached in RAM. The network connections are really fast 10Gb Ethernet. It is a virtual server blade setup. It isn't the network connections slowing things down because everything performs superbly when using a virtual disk (iSCSI to the SAN). But when we run the application on a NFS home directory mount, performance goes to the dogs. It appears that the Linux kernel isn't caching anything. So it is reading every single disk block needed by mmap() accesses over and over and over again. The NFS mount is done through autofs, which has only default settings. /proc/mounts shows the NFS mount is done with the following options: rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.11.52,mountvers=3,mountproto=tcp,addr=192.168.11.52 How can I make Ubuntu 10.04 cache the file instead of reloading it all the time?

  Read the article

• Migrating ODBC information through a batch file

  - by DeskSide

  I am a desktop support technician currently working on a large scale migration project across multiple sites. I am looking at a way to transfer ODBC entries from Windows XP to Windows 7. If anyone knows of a program or anything prebuilt that already does this, please redirect me. I've already looked but haven't found anything, so I'm trying to build my own. I know enough basic programming to read the work of others and monkey around with something that already exists, but not much else. I have come across a custom batch file written at one site that (among other things) exports ODBC information from the old computer and stores it on a server (labelled as y: through net use at the beginning of the file), then later transfers it from the server to a new computer. The pre-existing code is for Windows XP to XP migrations. Here are the pertinate bits of code: echo Exporting ODBC Information start /wait regedit.exe /e "y:\%username%\odbc.reg" HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI (and later on) echo Importing ODBC start /wait regedit /s "y:\%username%\odbc.reg" We are now migrating from Windows XP to 7, and this part of the batch file still seems to work for this particular site, where Oracle 8i and 10g are used. I'm looking to use my cut down version of this code at multiple sites, and I'm wondering if the same lines of code will still work for anything other than Oracle. Also, my research on this issue has shown that there are different locations in 64 bit operating systems for 32/64 bit entries, and I'm wondering what effect that would have on the code. Could I copy the same data to both parts of the registry, in hopes of catching everything? Any assistance would be appreciated. Thank you for your time.

  Read the article

• How to make Windows command prompt treat single quote as though it is a double quote?

  - by mark

  My scenario is simple - I am copying script samples from the Mercurial online book (at http://hGBook.red-bean.com) and pasting them in a Windows command prompt. The problem is that the samples in the book use single quoted strings. When a single quoted string is passed on the Windows command prompt, the latter does not recognize that everything between the single quotes belongs to one string. For example, the following command: hg commit -m 'Initial commit' cannot be pasted as is in a command prompt, because the latter treats 'Initial commit' as two strings - 'Initial and commit'. I have to edit the command after paste and it is annoying. Is it possible to instruct the Windows command prompt to treat single quotes similarly to the double one? EDIT Following the reply by JdeBP I have done a little research. Here is the summary: Mercurial entry point looks like so (it is a python program): def run(): "run the command in sys.argv" sys.exit(dispatch(request(sys.argv[1:]))) So, I have created a tiny python program to mimic the command line processing used by mercurial: import sys print sys.argv[1:] Here is the Unix console log: [hg@Quake ~]$ python 1.py "1 2 3" ['1 2 3'] [hg@Quake ~]$ python 1.py '1 2 3' ['1 2 3'] [hg@Quake ~]$ python 1.py 1 2 3 ['1', '2', '3'] [hg@Quake ~]$ And here is the respective Windows console log: C:\Workpython 1.py "1 2 3" ['1 2 3'] C:\Workpython 1.py '1 2 3' ["'1", '2', "3'"] C:\Workpython 1.py 1 2 3 ['1', '2', '3'] C:\Work One can clearly see that Windows does not treat single quotes as double quotes. And this is the essence of my question.

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• Linux on MacBook Air

  - by enduser

  I'm thinking of getting a MacBook Air. The answers to this post will help me make my decision. My questions and my understanding of current solutions are: How difficult is it to install a Linux-based OS (like Fedora or Ubuntu)? I've heard a little about rEFIt, but am not sure what to make of it. Is it completely necessary? Do I still need it if I don't plan to dual boot with Mac OS X? Also a dual-boot isn't necessary, I'd just like to run Fedora/Ubuntu by itself, but I'm curious to know if a dual boot is simple. Does everything 'just work'? In my current laptop I need to add a wireless driver (Broadcom card). I've heard Macs use Broadcom wireless cards. Will this be an issue? How about graphics/touchpad (& multitouch)/sound? I'm aware there are tutorials out there on how to install some older version of some os on your Mac, but my questions are a bit more general: Will it be easy to use (install and configure drivers for) recent Linux distributions with a new MacBook Air? Note: I don't mind extra configuration, but would like to know where it'll be necessary, because if it's too much of a hassle I'll look at other hardware.

  Read the article

• Cisco VoIP stuck as Unregistered?

  - by Shifty

  Question: Why is one VoIP stuck as Unregistered? Background: We have a Cisco UC540 Small Business switch/router/voip combo. This phone was working until I powered everything down to install a larger UPS unit. The phone originally had a status of "Deceased". I removed the registration and tried to add it again. Now it just sits as "Unregistered". I even tried giving it another extension. I am stuck using the Cisco Communication Assistant since this is small business hardware. There is very limited CLI access. Also, from what I heard, if you access the CLI with out cisco permission, you will void any warranty. The phone in question is a Cisco SPA501G. It is connected to a SG300-28P. There are 5 other phones on this switch working just fine. I have tried other ports with no luck. Both the link and PoE lights are lit up. Any ideas?

  Read the article

• 2 Computers, same network, different outgoing speeds when uploading to internet?

  - by user117339

  I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

  Read the article

• PAM with KRB5 to Active Directory - How to prevent update of AD password?

  - by Ex Umbris

  I have a working Fedora 9 system that's set up to authenticate users via PAM - krb5 - Active Directory. I'm migrating this to Fedora 14, and everything works, but it's working too well :-) On Fedora 9, if a Linux user updated their password, it did not propagate to their Active Directory account. On Fedora 14, it is changing their A/D password. The problem is I don't want A/D to be updated. Here's my password-auth-ac: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth required pam_deny.so account required pam_unix.so account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 type= password sufficient pam_unix.so sha512 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so -session optional pam_systemd.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so I tried removing the line password sufficient pam_krb5.so use_authtok But then when attempting to change the Linux password, if they provide their A/D password for the authentication prompt, they get the error: passwd: Authentication token manipulation error What I want to achieve is: Allow authentication with either the A/D or Linux password (the Linux password is a fall-back for certain sysadmin users in case A/D is unavailable for some reason). This is working now. Allow users to change their Linux passwords without affecting their A/D passwords. Is this possible?

  Read the article

• cPanel FTP account access to sym links from parent directory

  - by totbar

  I would like to give a potential developer temporary access to some of my projects. I have almost everything in its own subdomain, and each directory is a sibling to my public_html directory. It looks something like: ("developer" is the cPanel account name.) developer/ *This is the top level directory for the cPanel account. "/home/developer" site1/ *site1.mysite.com site2/ *site2.mysite.com site3/ *site3.mysite.com public_html/ *www.mysite.com ... etc I created a directory inside public_html called tempdev and I added symbolic links to each of the sibling directories listed above. My understanding of cPanel is that I can only assign one user with "Special FTP Access" per domain. I really dont want to give a complete stranger my login creds, (its just a development environment but still). So I used the cPanel FTP account creator UI. It will not allow me to assign the user access to the directories outside of public_html. I cant even give access to public_html either. So I made the tempdev directory in www and created the symlinks. Using the new account, I can see the symlinks, but I can go into them. Is there a better way to accomplish what I am attempting?

  Read the article

• sudo or acl or setuid/setgid?

  - by Xavier Maillard

  for a reason I do not really understand, everyone wants sudo for all and everything. At work we even have as many entries as there are way to read a logfile (head/tail/cat/more, ...). I think, sudo is defeating here. I'd rather use a mix of setgid/setuid directories and add ACL here and there but I really need to know what are the best practices before starting up. Our servers have %admin, %production, %dba, %users -i.e many groups and many users. Each service (mysql, apache, ...) has its own way to install privileges but members of the %production group must be able to consult configuration file or even log files. There is still the solution to add them into the right groups (mysql...) and set the good permission. But I do not want to usermod all users, I do not want to modify standards permissions since it could change after each upgrade. On the other hand, setting acls and/or mixing setuid/setgid on directories is something I could easily do without "defacing" the standard distribution. What do you think about this ? Taking the mysql example, that would look like this: setfacl d:g:production:rx,d:other::---,g:production:rx,other::--- /var/log/mysql /etc/mysql Do you think this is good practise or should I definetely usermod -G mysql and play with standard permissions system ? Thank you

  Read the article

• How do I setup a secondary incoming mail server?

  - by abrahamvegh

  I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

  Read the article

• Is there a 'global media cache' in Windows 7 that may be used by third party media players?

  - by Pulse

  Here's the background. I don't use Windows Media Player or Media Centre, in fact both components have been 'turned off' via the 'Programs and Features' option. My media player of choice is a nightly build of MPC-HC, which plays virtually everything. I do, however, have VLC portable available for those rare instances when MPC-HC can't or won't play something correctly. This is the situation. I tend to download various media files via torrent, typically, game trailers or freely availably films, such as the recently released, torrent only, Pioneer One. Quite often these files are quite large, being 1GB+ so I quite often like to preview the file after it has downloaded a significant portion of the file. For the most part, this works quite well, and gives me an idea about the worth of continuing the download. Sometimes, however, the file doesn't play as expected and instead plays a completely unrelated file that has been previously played. Here's the strange thing. if I try to preview the file in MPC-HC or VLC both players play the same, previously played file, regardless of whichever player was originally responsible for playback. Most times, it's not even a file that's been played recently. I have searched the registry for some sort of MRU cache, but have found nothing. I have made sure each player has had it's respective history/cache deleted and can fine nothing on disk that seems to be storing this, apparently shared data. So, the question is, where are these unrelated players getting the file information from? Thnaks.

  Read the article

• Windows 7 not booting after failed SRT (SSD caching) install

  - by david

  This is a fairly new computer, only about a month old. i7 2700k, z68 motherboard, with a 1.5tb WD black HD, and a 128gb crucial M4 ssd. I followed the instructions for setting up ssd caching, the SATA controller was set to RAID, I installed the intel software and enabled acceleration and it said everything went fine. But when I went to reboot, I received the lovely "Reboot and Select proper Boot device" error message. I checked the bios, and it was booting from the correct HD (I tried the only other option anyway just in case, it was the ~50 odd gb of unformatted space left on the SSD) AFter that I entered the raid until (ctrl-i at boot) and removed the acceleration and deleted the raid array (because it was being used as a cache this was non destructive) Still no boot. So I reinstalled win7 directly on the SSD, booted, and checked the HDD to make sure it hadn't been wiped. It hadn't, all the files were still there, including all the windows stuff. I backed up my data to an external drive just in case, but I'd really like to get this install booting again. I trawled the webs a bit, and have tried entering recovery mode and using the bootrec.exe and bootsect.exe to fix it, but to be honest I'm not sure what I'm doing with those. My question is basically: How do I make my harddrive bootable again?

  Read the article

• Euro character messed up during FTP transfer

  - by djechelon

  My customer is using a very outdated ecommerce management system on my hosting service. For that product, no support is being provided anymore by the vendor. Brief explanation: the shop website, that claims to run under LAMP stack, is built by an old Visual Basic Windows application running on MS Access. The user constructs the shop, defines the HTML template, adds products and categories, etc. Then the VB exe builds the PHP pages (one for each template page) and the SQL script to run on MySQL. It also uploads everything via FTP and runs the installation/upgrade script on its own. The problem Browsing the website, many products' descriptions are cut before the euro sign. For example, what was supposed to be "Product price €1000" becomes "Product price" The analysis MySQL contains a cutted description until the € sign, so it's not PHP fault The Access databases contain full description with € sign, so it's not fault of the webmaster writing bad description or eDisplay cutting them The SQL that will run once the site gets uploaded, stored on my local machine before upload, contains the € sign The same script, after being FTPed by eDisplay and opened with nano from SSH, shows the € sign messed up like this: ^À vsftpd log reports (obfuscated for privacy) Sat Dec 15 11:16:57 2012 22 xxx.xxx.128.13 1112727 /srv/www/domains/xxxxxx.it/htdocs/db.sql b _ i r xxxxxxx ftp 0 * c which seems to be a binary transfer (and also a huge security vulnerability because you can download the whole database from unauthenticated HTTP) The eDisplay internal FTP client provides no option for ascii/binary transfer modes [Add] Trying to manually upload the SQL file via SFTP shows messing up euro [Add2] Trying to manually upload using Xftp client with explicit ASCII mode doesn't fix too It looks like the file gets uploaded as binary. Perhaps on the customer's previous host it all worked fine because that was a Windows host. The server It's an Azure virtual machine running openSUSE 12.2 with both vsftpd and openSSH The question Without asking the customer to manually upload files using FileZilla or replacing € with &euro;, because he refuses, what can I do on server side to prevent vsftpd to screw up euro sign?

  Read the article

• CMSs & ERPs for hospital management system

  - by Akshey

  Hi, What are the best free CMSs or CMS plugins or ERPs or any other free tools available for developing a hospital management system? I want to develop it for a children's hospital run by my father. The hospital is small with two doctors. Currently, everything is done manually on paper. The main entities who will be using the system are: Receptionist, the two doctors, chemist and the medical laboratorist. They will use it majorly for keeping the records of the patient. The patients would not be interacting with the system directly. The system needs to be user friendly and should be easy to learn. I was thinking to develop such a system using a CMS or an ERP or any other free tool. I have used wordpress/drupal in past but never used an ERP. Can you please guide me to make such a system using free, and preferably open source, tools? Update: I think it will be mostly a form driven system. What would be easy and better: creating the forms in drupal or using a php framework like symphony or cakePHP? Thanks, Akshey

  Read the article

• How do i Setup a Mac OS X Server - NameServer behind an Airport Extreme?

  - by basilmir

  I have a Mac mini server i want to setup to host a couple of things. My setup is as follows: The WAN connection (static IP and ISP nameservers) goes into the wan port of the Airport Extreme. The Mac mini server is connected to one of the ethernet ports. The mac mini will host my domain something.com. My settings so far: Airport Express gets: 96.x.x.x as the external static IP from the ISP 174.y.y.y as the nameserver Mac mini server always gets a reserved DHCP IP from the Airport Express: 10.0.1.3 is the server's ip 10.0.1.1 as the dns (this ip is the airport express itself) My dns server has an A record pointing to ns.something.com and a PTR doing the reverse. I've already added my 96.x.x.x to point ns.something.com with my registrar as attached. NOW: Nobody seems to be able to access my ns.something.com to resolve any of my records. From a any computer in my network I CAN see my ns and everything works. The outside on the other hand does not... it's as if the airport extreme which "holds" the exterior 94.x.x.x address doesn't pass DNS along to my 10.0.1.3 ns server. I have the server managing the airport. Isn't this supposed to work?

  Read the article

• Tuning Linux + HAProxy

  - by react

  I'm currently rolling out HAProxy on Centos 6 which will send requests to some Apache HTTPD servers and I'm having issues with performance. I've spent the last couple of days googling and still can't seem to get past 10k/sec connections consistently when benchmarking (sometimes I do get 30k/sec though). I've pinned the IRQ's of the TX/RX queues for both the internal and external NICS to separate CPU cores and made sure HAProxy is pinned to it's own core. I've also made the following adjustments to sysctl.conf: # Max open file descriptors fs.file-max = 331287 # TCP Tuning net.ipv4.tcp_tw_reuse = 1 net.ipv4.ip_local_port_range = 1024 65023 net.ipv4.tcp_max_syn_backlog = 10240 net.ipv4.tcp_max_tw_buckets = 400000 net.ipv4.tcp_max_orphans = 60000 net.ipv4.tcp_synack_retries = 3 net.core.somaxconn = 40000 net.ipv4.tcp_rmem = 4096 8192 16384 net.ipv4.tcp_wmem = 4096 8192 16384 net.ipv4.tcp_mem = 65536 98304 131072 net.core.netdev_max_backlog = 40000 net.ipv4.tcp_tw_reuse = 1 If I use AB to hit the a webserver directly I easily get 30k/s connections. If I stop the webservers and use AB to hit HAProxy then I get 30k/s connections but obviously it's useless. I've also disabled iptables for now since I read that nf_conntrack can slow everything down, no change. I've also disabled the irqbalance service. The fact that I can hit each individual device with 30k/s makes me believe the tuning of the servers is OK and that it must be some HAProxy config? Here's the config which I've built from reading tuning articles, etc http://pastebin.com/zsCyAtgU The server is a dual Xeon CPU E5-2620 (6 cores) with 32GB of RAM. Running Centos 6.2 x64. The private and public interfaces are on separate NICS. Anyone have any ideas? Thanks.

  Read the article

• Exchange Full Access issue

  - by Benjamin Jones

  I was just hired as a System Admin for a small company. They use Exchange 2010 for their Mail Server. I've never had a permission issue like this with Exchange because I worked for a larger firm with less responsibility before. Their old system admin is LONG GONE, so I can't ask him what he did. The issue: Right now ANYONE can gain access to a mailbox and view the mail in the mailbox. This is disabled by default you say and you have to grant them full access ? You are right, but the old System Admin I guess didn't know what he was doing. SO right now user A can open up user B mailbox with out being granted permission. So here is what I found out. Every user in EMC Full Access Permission has Exchange Server group granted. Within the Exchange Server Group, Domain User's is a Member Of. Within Domain User's all user's are listed as Members. So my guess is because of this all users can access ANY mailbox? Well GOOD News. The company is small (35 people) and they are not computer savvy, so hopefully no one has figured out they can open anyone's mailbox.(From what I can tell no). Next thing I did was with my domain user in EMC, delete Exchange Servers Group in FUll Access Permissions and grant access to my user. I made sure that my memeber was apart of the Exchange Server Group. Went to our OWA site and now I don't have permission to my own mailbox. Re did everything to the way it was with my user and now I'm stuck. Any help? I would think granting a single user that is in the Exchange Server group, Full Access to that mailbox would enable them to open that mailbox???? I guess I am wrong.

  Read the article

• Why does my ftp(e)s server fails like half of the time

  - by user1092608

  I have this discussion at work regarding our ftp server running via vsftpd. Initially, we have opted to serve ftpes instead of sftp because this seemed the most flexible and straightforward solution for our server to have secure file transmission. Afterwards, our ftp server seems to be a source of issues for our end users. Half of the time, users complain about not working ftp connections. I must say, i tested our FTP trough different infrastructures (=in the field, at random times at random places) and indeed, sometimes behind some configurations (=no idea how they are configured, because the 'field' testing), i recieve errors. Some of the are: Error: Failed to retrieve directory listing (filezilla) Furthermore, behind my basic home configuration, everything seems to be running fine. I (think I) did all the basic configuration checks (passive mode?, firewall for all ports?, ...) and can't seem to find the source. Being a bunch of techies at our small office, yet knowing nothing about infrastructure, some start suggesting that ftps protocol could be the source of issues. ("No, i only knew sftp so far" "Ftps is not widespread"). I, however, strongly doubt this hypothesis, since reading around on the www, asking questions on serverfault, everyone seems to deny this. So, as I would like to avoid reconfiguring, since this involves messing around in our SSH service, our virtual user setup and ftp service, i would need some advice on 1) what could be potentially the general cause? 2) do you have some general tips? 3) would you mind having a look at my configuration file? ----- General Settings ----- write_enable=YES dirmessage_enable=YES nopriv_user=ftpsecure ftpd_banner="Welcome to XXXX FTP!" hide_ids=YES hide_file=.* max_per_ip=10 max_clients=10 local_enable=YES local_umask=022 chroot_local_user=YES secure_chroot_dir=/usr/share/empty userlist_enable=NO userlist_deny=YES userlist_file=/etc/vsftp_deny_users guest_enable=YES guest_username=ftpvirtual virtual_use_local_privs=YES user_sub_token=$USER local_root=/srv/ftp/ftpvirtual/$USER anonymous_enable=NO syslog_enable=NO xferlog_enable=YES xferlog_file=/var/log/vsftpd_xfer.log connect_from_port_20=YES pam_service_name=vsftpd listen=YES listen_port=21 pasv_enable=YES pasv_min_port=30000 pasv_max_port=30030 pasv_address=foo ssl_enable=YES rsa_cert_file=/etc/vsftpd.pem rsa_private_key_file=/etc/vsftpd.pem force_local_data_ssl=YES force_local_logins_ssl=YES ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES ssl_ciphers=HIGH anon_mkdir_write_enable=NO anon_root=/srv/ftp anon_upload_enable=NO idle_session_timeout=900 log_ftp_protocol=NO dsa_cert_file=/etc/vsftpd.pem Thanks

  Read the article

• Mysql start fails with Operating System error 13

  - by curious

  I have XAMPP on my Ubuntu Lucid system and everything worked fine. But there seems to be some problem now and mysql wouldn't start. I had tried to recover a few Drupal databases and hence copied the raw files to /opt/lampp/var/mysql folder like all other database folders. And, I guess that could have caused the problem. I am pasting the last few lines of the error log. Someone please help me out. 100814 15:17:47 mysqld_safe Starting mysqld daemon with databases from /opt/lampp/var/mysql 100814 15:17:47 [Note] Plugin 'FEDERATED' is disabled. 100814 15:17:47 [ERROR] Can't open shared library 'libpbxt.so' (errno: 0 API version for STORAGE ENGINE plugin is too different) 100814 15:17:47 [Warning] Couldn't load plugin named 'PBXT' with soname 'libpbxt.so'. 100814 15:17:48 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name /opt/lampp/var/mysql/ibdata1 InnoDB: File operation call: 'open'. InnoDB: Cannot continue operation.

  Read the article

• Server 2012 - transparent SMB failover without shared discs, possible?

  - by TomTom

  here is the scenario - there is a small set (200gb around) of data that I HAVE to keep available. Those are basically shared VHD images that serve as master images for a lot of our VM's - they then run in differential discs off those. The whole set is "mostly read only". In more detail: A file that IS there and IS used will NEVER change. I may delete files (when absolutely not in use) and add new files, but a file that is there once gets read protection set and that it is until it is retired. Obviously, I need as much uptime as possible. SO FAR we run that by having this directory local on every Hyper-V server. Now I think moving this into our storage fabric. Due to the "it HAS to be there" I pretty much want a share nothing architecture. DFS would be perfect for this - a file never changes, so replication would work nicely. Folders could be replicated to a number of servers, all would reference them from there. Now, that hyper-V supports SMB that could be a good idea to isolate these on a number of servers - we try to move into a scenario where the storage is more centralized. Server 2012 supports always on shares, but it seems that this only works with a clustered disc behind. Is there any way around this for read only file stores? All documentation points to stuff like a shared JBOD - but that would leave me open for file system corruption. I really plan to go quite separately here, vertically - 2 servers, both with SSD only for this, both with their own 2000W separate USV, both with enough bandwidth to handle everything thrown at them (note to everyone tinking this is 10G - this would be SLOW and EXPENSIVE compared to a nice Infiniband backbone). The real crux is that this is an edge case obviously - as the files are read only once in use.

  Read the article

• Moving Images from Database to File System

  - by msarchet

  So currently in our system we have been storing image files in the database (SQL Express 2005). Unfortunately it wasn't perceived that this would reach the max database size allowed by the SQL Express License. So I have proposed a plan of storing the images in the file system and only indexing where the file is in the database. The plan is to save the root path in our OptionsTable as something like ImagesRoot and then only saving the actual imageID in the table, which is basically a FK from the PK of the record with the image. I have determined that it would be best to then split this down into sub-directories inside of the ImagesRoot based on every 1000 images so basically (ImagedID / 1000)\(ImageID % 1000) (e.g. ImageID is 1999 it would be in %ImageRoot%\1\999). I'm looking for any potential pitfalls of this system and any thing that could be improved as I am already receiving some resistance from the owner of the company who wants everything to be in databases. Along those lines I would also take reasons why it should all be in databases. I should mention we have in place already automated backups that run for all of our customers databases and any files that are generated by our program that are required to be saved over a period of time These are optional but if someone isn't using our system it is expected that they are using their own or data loss isn't our problem (it is if our system fails and they are using it!). Thanks

  Read the article

• AA doesn't work due to monitor?

  - by MikeQ

  I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

  Read the article

• How should I configure backup of my server?

  - by ed209

  I have just rented a dedicated server. If it helps this is the config I have: CPU1 Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (Cores 8) RAM 15975 MB Disk /dev/sda doesn't contain a valid partition table (=> /dev/sda doesn't) Disk /dev/sdc doesn't contain a valid partition table (=> /dev/sdc doesn't) Disk /dev/sdb doesn't contain a valid partition table (=> /dev/sdb doesn't) Disk /dev/sda: 120.0 GB (=> 114 GIB) Disk /dev/sdc: 3000.6 GB (=> 2861 GIB) Disk /dev/sdb: 3000.6 GB (=> 2861 GIB) /dev/sda is a 120GB SSD. This is where I have Ubuntu/lamp installed. It's the drive that will run my site. With the account I got two other drives of 3000GB each which I really don't need but they came with the account. I figured I could use these to back up my main 120gb drive. So a couple of things I wondered were: Should I use these for backups? How should I back up. The data I want to back up is a user uploads directory full of images and the database. Everything else is either in a code repo or backed up some other way. For example, it would be nice to know there is a disk image of the 120gb drive somewhere that I can copy over should there be any problems but equally I don't mind doing a fresh install of all the software and copying over just the images and database dump. Thanks for your advice! (also, happy to not use the two other drives and backup elsewhere if it's more sensible)

  Read the article

< Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >