Search Results

Search found 15670 results on 627 pages for 'multi level'.

Page 552/627 | < Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >

• Unable to make properly work the Ralink rt3090 wifi card on my Lenovo B575 with Kubuntu 12.04 64bit

  - by Sebastien

  I look and tried many solution from many thread but I still unable to make this wifi card work properly (very slow, unable to connect to some wifi spot, etc.). I tried to compile the driver from the ralink website but it doesn't work. Tried to blacklist many mod, withou any result. So here are some command results, hope their help you help me: lspci sebastien@sebastien-portable:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 14h Processor Root Complex 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Wrestler [Radeon HD 6310] 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] 00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 42) 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) 00:15.2 PCI bridge: Advanced Micro Devices [AMD] nee ATI SB900 PCI to PCI bridge (PCIE port 2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 0 (rev 43) 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 1 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 2 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 3 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 4 00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 6 00:18.6 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 5 00:18.7 Host bridge: Advanced Micro Devices [AMD] Family 12h/14h Processor Function 7 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 03:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe lsmod sebastien@sebastien-portable:~$ lsmod Module Size Used by rt2800pci 18715 0 arc4 12529 2 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 55301 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci rt2860sta 864748 0 snd_hda_codec_conexant 62128 1 snd_hda_codec_hdmi 32474 1 uvcvideo 72627 0 rts5139 351143 0 snd_hda_intel 33773 4 videodev 98259 1 uvcvideo snd_hda_codec 127706 3 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec psmouse 87692 0 v4l2_compat_ioctl32 17128 1 videodev serio_raw 13211 0 k10temp 13166 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec sp5100_tco 13791 0 i2c_piix4 13301 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi ideapad_laptop 18234 0 sparse_keymap 13890 1 ideapad_laptop rfcomm 47604 0 joydev 17693 0 snd_seq_midi_event 14899 1 snd_seq_midi bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 18 snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd mac_hid 13253 0 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 radeon 804372 4 video 19596 0 wmi 19256 0 ttm 76949 1 radeon drm_kms_helper 46978 1 radeon drm 242038 6 radeon,ttm,drm_kms_helper i2c_algo_bit 13423 1 radeon iwconfig sebastien@sebastien-portable:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"4CE6763F0E0A" Mode:Managed Frequency:2.452 GHz Access Point: 4C:E6:76:3F:0E:0A Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:100 Missed beacon:0 eth0 no wireless extensions.

  Read the article

• When to use Aspect Oriented Architecture (AOA/AOD)

  When is it appropriate to use aspect oriented architecture? I think the only honest answer to this question is that it depends on the context for which the question is being asked. There really are no hard and fast rules regarding the selection of an architectural model(s) for a project because each model provides good and bad benefits. Every system is built with a unique requirements and constraints. This context will dictate when to use one type of architecture over another or in conjunction with others. To me aspect oriented architecture models should be a sub-phase in the architectural modeling and design process especially when creating enterprise level models. Personally, I like to use this approach to create a base architectural model that is defined by non-functional requirements and system quality attributes.   This general model can then be used as a starting point for additional models because it is targets all of the business key quality attributes required by the system.Aspect oriented architecture is a method for modeling non-functional requirements and quality attributes of a system known as aspects. These models do not deal directly with specific functionality. They do categorize functionality of the system. This approach allows a system to be created with a strong emphasis on separating system concerns into individual components. These cross cutting components enables a systems to create with compartmentalization in regards to non-functional requirements or quality attributes.  This allows for the reduction in code because an each component maintains an aspect of a system that can be called by other aspects. This approach also allows for a much cleaner and smaller code base during the implementation and support of a system. Additionally, enabling developers to develop systems based on aspect-oriented design projects will be completed faster and will be more reliable because existing components can be shared across a system; thus, the time needed to create and test the functionality is reduced.   Example of an effective use of Aspect Oriented ArchitectureIn my experiences, aspect oriented architecture can be very effective with large or more complex systems. Typically, these types of systems have a large number of concerns so the act of defining them is very beneficial for reducing the system’s complexity because components can be developed to address each concern while exposing functionality to the other system components. The benefits to using the aspect oriented approach as the starting point for a system is that it promotes communication between IT and the business due to the fact that the aspect oriented models are quality attributes focused so not much technical understanding is needed to understand the model.An example of this can be in developing a new intranet website. Common Intranet Concerns: Error Handling Security Logging Notifications Database connectivity Example of a not as effective use of Aspect Oriented ArchitectureAgain in my experiences, aspect oriented architecture is not as effective with small or less complex systems in comparison.  There is no need to model concerns for a system that has a limited amount of them because the added overhead would not be justified for the actual benefits of creating the aspect oriented architecture model.  Furthermore, these types of projects typically have a reduced time schedule and a limited budget.  The creation of the Aspect oriented models would increase the overhead of a project and thus increase the time needed to implement the system. An example of this is seen by creating a small application to poll a network share for new files and then FTP them to a new location.  The two primary concerns for this project is to monitor a network drive and FTP files to a new location.  There is no need to create an aspect model for this system because there will never be a need to share functionality amongst either of these concerns.  To add to my point, this system is so small that it could be created with just a few classes so the added layer of componentizing the concerns would be complete overkill for this situation. References:Brichau, Johan; D'Hondt, Theo. (2006) Aspect-Oriented Software Development (AOSD) - An Introduction. Retreived from: http://www.info.ucl.ac.be/~jbrichau/courses/introductionToAOSD.pdf

  Read the article

• Do you want to be an ALM Consultant?

  - by Martin Hinshelwood

  Northwest Cadence is looking for our next great consultant! At Northwest Cadence, we have created a work environment that emphasizes excellence, integrity, and out-of-the-box thinking.  Our customers have high expectations (rightfully so) and we wouldn’t have it any other way!   Northwest Cadence has some of the most exciting customers I have ever worked with and even though I have only been here just over a month I have already: Provided training/consulting for 3 government departments Created and taught courseware for delivering Scrum to teams within a high profile multinational company Started presenting Microsoft's ALM Engagement Program  So if you are interested in helping companies build better software more efficiently, then.. Enquire at [email protected] Application Lifecycle Management (ALM) Consultant An ALM Consultant with a minimum of 8 years of relevant experience with Application Lifecycle Management, Visual Studio (including Visual Studio Team System) and software design is needed. Must provide thought leadership on best practices for enterprise architecture, understand the Microsoft technology solution stack, and have a thorough understanding of enterprise application integration. The ALM Practice Lead will play a central role in designing and implementing the overall ALM Practice strategy, including creating, updating, and delivering ALM courseware and consultancy engagements. This person will also provide project support, deliverables, and quality solutions on Visual Studio Team System that exceed client expectations. Engagements will vary and will involve providing expert training, consulting, mentoring, formulating technical strategies and policies and acting as a “trusted advisor” to customers and internal teams. Sound sense of business and technical strategy required. Strong interpersonal skills as well as solid strategic thinking are key. The ideal candidate will be capable of envisioning the solution based on the early client requirements, communicating the vision to both technical and business stakeholders, leading teams through implementation, as well as training, mentoring, and hands-on software development. The ideal candidate will demonstrate successful use of both agile and formal software development methods, enterprise application patterns, and effective leadership on prior projects. Job Requirements Minimum Education: Bachelor’s Degree (computer science, engineering, or math preferred). Locale / Travel: The Practice Lead position requires estimated 50% travel, most of which will be in the Continental US (a valid national Passport must be maintained).  This is a full time position and will be based in the Kirkland office. Preferred Education: Master’s Degree in Information Technology or Software Engineering; Premium Microsoft Certifications on .NET (MCSD) or MCPD or relevant experience; Microsoft Certified Trainer (MCT) or relevant experience. Minimum Experience and Skills: 7+ years experience with business information systems integration or custom business application design and development in a professional technology consulting, corporate MIS or software development environment. Essential Duties & Responsibilities: Provide training, consulting, and mentoring to organizations on topics that include Visual Studio Team System and ALM. Create content, including labs and demonstrations, to be delivered as training classes by Northwest Cadence employees. Lead development teams through the complete ALM and/or Visual Studio Team System solution. Be able to communicate in detail how a solution will integrate into the larger technical problem space for large, complex enterprises. Define technical solution requirements. Provide guidance to the customer and project team with respect to technical feasibility, complexity, and level of effort required to deliver a custom solution. Ensure that the solution is designed, developed and deployed in accordance with the agreed upon development work plan. Create and deliver weekly status reports of training and/or consulting progress. Engagement Responsibilities: · Provide a strong desire to provide thought leadership related to technology and to help grow the business. · Work effectively and professionally with employees at all levels of a customer’s organization. · Have strong verbal and written communication skills. · Have effective presentation, organizational and planning skills. · Have effective interpersonal skills and ability to work in a team environment. Enquire at [email protected]

  Read the article

• 5 Ways to Celebrate the Release of Internet Explorer 9

  - by David Wesst

  The day has finally come: Microsoft has released a web browser that is awesome. On Monday night, Microsoft officially introduced the world to the latest edition to its product family: Internet Explorer 9. That makes March 14, 2011 (also known as PI day) the official birthday of Microsoft’s rebirth in the world of web browsing. Just like any big event, you take some time to celebrate. Here are a few things that you can do to celebrate the return of Internet Explorer. 1. Download It If you’re not a big partier, that’s fine. The one thing you can do (and definitely should) is download it and give it a shot. Sure, IE may have disappointed you in the past, but believe me when I say they really put the effort in this time. The absolute least you can do is give it a shot to see how it stands up against your favourite browser. 2. Get yourself an HTML5 Shirt One of the coolest, if not best parts of IE9 being released is that it officially introduces HTML5 as a fully supported platform from Microsoft. IE9 supports a lot of what is already defined in the HTML5 technical spec, which really demonstrates Microsoft’s support of the new standard. Since HTML5 is cool on the web, it means that it is cool to wear it too. Head over to html5shirt.com and get yourself, or your staff, or your whole family, an HTML5 shirt to show the real world that you are ready for the future of the web. 3. HTML5-ify Something Okay, so maybe a shirt isn’t enough for you. Maybe you need start using HTML5 for real. If you have a blog, or a website, or anything out there on the web, celebrate IE9 adding some HTML5 to your site. Whether that is updating old code, adding something new, or just changing your WordPress theme, definitely take a look at what HTML5 can do for you. 4. Help Kill Old IE and Upgrade your Organization See this? This is sad. Upgrading web browsers in an large enterprise or organization is not a trivial task. A lot of companies will use the excuse of not having the resources to upgrade legacy web applications they were built for a specific version of IE and it doesn’t render correctly in legacy browsers. Well, it’s time to stop the excuses. IE9 allows you to define what version of Internet Explorer you would like it to emulate. It takes minimal effort for the developer, and will get rid of the excuses. Show your IT manager or software development team this link and show them how easy it is to make old code render right in the latest and greatest from the IE team. 5. Submit an Entry for DevUnplugged So, you’ve made it to number five eh? Well then, you must be pretty hardcore to make it this far down the list. Fine, let’s take it to the next level and build an HTML5 game. That’s right. A game. Like a video game. HTML5 introduces some amazing new features that can let you build working video games using HTML5, CSS3, and JavaScript. Plus, Microsoft is celebrating the launch of IE9 with a contest where you can submit an HTML5 game (or audio application) and have a chance to win a whack of cash and other prizes. Head here for the full scoop and rules for the DevUnplugged. This post also appears at http://david.wes.st

  Read the article

• Analytics in an Omni-Channel World

  - by David Dorf

  Retail has been around ever since mankind started bartering.  The earliest transactions were very specific to the individuals buying and selling, then someone had the bright idea to open a store.  Those transactions were a little more generic, but the store owner still knew his customers and what they wanted.  As the chains rolled out, customer intimacy was sacrificed for scale, and retailers began to rely on segments and clusters.  But thanks to the widespread availability of data and the technology to convert said data into information, retailers are getting back to details. The retail industry is following a maturity model for analytics that is has progressed through five stages, each delivering more value than the previous. Store Analytics Brick-and-mortar retailers (and pure-play catalogers as well) that collect anonymous basket-level data are able to get some sense of demand to help with allocation decisions.  Promotions and foot-traffic can be measured to understand marketing effectiveness and perhaps focus groups can help test ideas.  But decisions are influenced by the majority, using faceless customer segments and aggregated industry data points.  Loyalty programs help a little, but in many cases the cost outweighs the benefits. Web Analytics The Web made it much easier to collect data on specific, yet still anonymous consumers using cookies to track visits. Clickstreams and product searches are analyzed to understand the purchase journey, gauge demand, and better understand up-selling opportunities.  Personalization begins to allow retailers target market consumers with recommendations. Cross-Channel Analytics This phase is a minor one, but where most retailers probably sit today.  They are able to use information from one channel to bolster activities in another. However, there are technical challenges combining data silos so its not an easy task.  But for those retailers that are able to perform analytics on both sources of data, the pay-off is pretty nice.  Revenue per customer begins to go up as customers have a better brand experience. Mobile & Social Analytics Big data technologies are enabling a 360-degree view of the customer by incorporating psychographic data from social sites alongside traditional demographic data.  Retailers can track individual preferences, opinions, hobbies, etc. in order to understand a consumer's motivations.  Using mobile devices, consumers can interact with brands anywhere, anytime, accessing deep product information and reviews.  Mobile, combined with a loyalty program, presents an opportunity to put shopping into geographic context, understanding paths to the store, patterns within the store, and be an always-on advertising conduit. Omni-Channel Analytics All this data along with the proper technology represents a new paradigm in which the clock is turned back and retail becomes very personal once again.  Rich, individualized data better illuminates demand, allows for highly localized assortments, and helps tailor up-selling.  Interactions with all channels help build an accurate profile of each consumer, and allows retailers to tailor the retail experience to meet the heightened expectations of today's sophisticated shopper.  And of course this culminates in greater customer satisfaction and business profitability.

  Read the article

• CacheAdapter 2.4 – Bug fixes and minor functional update

  - by Glav

  Note: If you are unfamiliar with the CacheAdapter library and what it does, you can read all about its awesome ability to utilise memory, Asp.Net Web, Windows Azure AppFabric and memcached caching implementations via a single unified, simple to use API from here and here.. The CacheAdapter library is receiving an update to version 2.4 and is currently available on Nuget here. Update: The CacheAdapter has actualy just had a minor revision to 2.4.1. This significantly increases the performance and reliability in memcached scenario under more extreme loads. General to moderate usage wont see any noticeable difference though. Bugs This latest version fixes a big that is only present in the memcached implementation and is only seen in rare, intermittent times (making i particularly hard to find). The bug is where a cache node would be removed from the farm when errors in deserialization of cached objects would occur due to serialised data not being read from the stream in entirety. The code also contains enhancements to better surface serialization exceptions to aid in the debugging process. This is also specifically targeted at the memcached implementation. This is important when moving from something like memory or Asp.Web caching mechanisms to memcached where the serialization rules are not as lenient. There are a few other minor bug fixes, code cleanup and a little refactoring. Minor feature addition In addition to this bug fix, many people have asked for a single setting to either enable or disable the cache.In this version, you can disable the cache by setting the IsCacheEnabled flag to false in the application configuration file. Something like the example below: <Glav.CacheAdapter.MainConfig> <setting name="CacheToUse" serializeAs="String"> <value>memcached</value> </setting> <setting name="DistributedCacheServers" serializeAs="String"> <value>localhost:11211</value> </setting> <setting name="IsCacheEnabled" serializeAs="String"> <value>False</value> </setting> </Glav.CacheAdapter.MainConfig> Your reasons to use this feature may vary (perhaps some performance testing or problem diagnosis). At any rate, disabling the cache will cause every attempt to retrieve data from the cache, resulting in a cache miss and returning null. If you are using the ICacheProvider with the delegate/Func<T> syntax to populate the cache, this delegate method will get executed every single time. For example, when the cache is disabled, the following delegate/Func<T> code will be executed every time: var data1 = cacheProvider.Get<SomeData>("cache-key", DateTime.Now.AddHours(1), () => { // With the cache disabled, this data access code is executed every attempt to // get this data via the CacheProvider. var someData = new SomeData() { SomeText = "cache example1", SomeNumber = 1 }; return someData; }); One final note: If you access the cache directly via the ICache instance, instead of the higher level ICacheProvider API, you bypass this setting and still access the underlying cache implementation. Only the ICacheProvider instance observes the IsCacheEnabled setting. Thanks to those individuals who have used this library and provided feedback. Ifyou have any suggestions or ideas, please submit them to the issue register on bitbucket (which is where you can grab all the source code from too)

  Read the article

• Two Candidates + One Job = Two Different Outcomes

  - by david.talamelli

  Recruiters have always headhunted (sidenote: I do not like this word, in general I think the type of people who use the phrase “headhunting” are the ones who are trying to sound more important than what they likely are). Any serious Recruiter engages in direct recruiting activity, it is part and parcel of the business it is not something unique. With the uptake in Social Media the past 4-5 years, we have seen an increase in the number of Recruiters proactively reaching out to people about job opportunities. We have also seen this activity increase across all levels of hire, from help desk roles to C-Level Executives. While getting approached about a role can be a nice boost to a person’s ego, do not let it give you an inflated sense of entitlement. It is The way that people handle themselves during these calls and subsequent interviews will have a large impact on their potential to land that job. Last week I spoke to two very different candidates, both about the same position and both with very different outcomes. On paper, Candidate #1 looked fantastic; they ticked many of the boxes that we were looking for. The person is working at global IT company and working in a similar role as the one we were hiring for but not in as senior as the role we had. This role would have been the perfect step to getting involved in more complex work for the person. Candidate #2 had less polished IT experience, ticked some of the boxes we were looking for and on paper in comparison to Candidate #1 was not as close a fit as Candidate #1 was. It seemed like I was comparing apples and oranges. After speaking to both candidates it turns out I was comparing apples and oranges except the person better suited for our role was not the one I was expecting it would be. The first candidate on paper looked great – they had the experience we were looking for and appeared to be just right for the role, but after talking to them, they gave me the impression that they thought the world owed them. The impression I was left with was that they did not equate success with hard work, they seemed more interested in “what is in it for me”. Rather than having a proper conversation with me, I was often cut off and asked to hurry it up when explaining our business, what we are doing, etc... . This person seemed more interested in the job title and money than how rather than think about ways to make the role successful. Candidate #2 who had limited experience, made up for any perceived lack of experience and them some with a demonstrated motivation to succeed and do the things needed to make that happen. Candidate #2 made a great first impression, they did not seem afraid of hard work and demonstrated a “team player” attitude. In talking to them they kept me engaged, listened and asked thoughtful questions that made me think this is the type of person who creates their own luck and who would thrive in a place like Oracle. Skills, capabilities, experience and a good resume can certainly get your foot in the door, but the wrong attitude or approach to work can close those opportunities just as easily. On the other hand, hard work, effort and a genuine work ethic may help open those doors that would otherwise closed for you. A resume with all the credentials gets you in the front door but that is just the beginning of the process. It is not how we start the race that is important, it’s how things end that matter most.

  Read the article

• Book Review: Oracle ADF 11gR2 Development Beginner's Guide

  - by Grant Ronald

  Packt Publishing asked me to review Oracle ADF 11gR2 Development Beginner's Guide by Vinod Krishnan, so on a couple of long flights I managed to get through the book in a couple of sittings. One point to make clear before I go into the review.  Having authored "The Quick Start Guide to Fusion Development: JDeveloper and Oracle ADF", I've written a book which covers the same topic/beginner level.  I also think that its worth stating up front that I applaud anyone who has gone  through the effort of writing a technical book. So well done Vinod.  But on to the review: The book itself is a good break down of topic areas.  Vinod starts with a quick tour around the IDE, which is an important step given all the work you do will be through the IDE.  The book then goes through the general path that I tend to always teach: a quick overview demo, ADF BC, validation, binding, UI, task flows and then the various "add on" topics like security, MDS and advanced topics.  So it covers the right topics in, IMO, the right order.  I also think the writing style flows nicely as well - Its a relatively easy book to read, it doesn't get too formal and the "Have a go hero" hands on sections will be useful for many. That said, I did pick out a number of styles/themes to the writing that I found went against the idea of a beginners guide.  For example, in writing my book, I tried to carefully avoid talking about topics not yet covered or not yet relevant at that point in someone's learning.  So, if I was a new ADF developer reading this book, did I really need to know about ADFBindingFilter and DataBindings.cpx file on page 58 - I've only just learned how to do a drag and drop simple application so showing me XML configuration files relevant to JSF/ADF lifecycle is probably going to scare me off! I found this in a couple of places, for example, the security chapter starts on page 219 but by page 222 (and most of the preceding pages are hands-on steps) we're diving into the web.xml, weblogic.xml, adf-config.xml, jsp-config.xml and jazn-data.xml.  Don't get me wrong, I'm not saying you shouldn't know this, but I feel you have to get people on a strong grounding of the concepts before showing them implementation files.  If having just learned what ADF Security is will "The initialization parameter remove.anonymous.role is set to false for the JpsFilter filter as this filter is the first filter defined in the file" really going to help me? The other theme I found which I felt didn't work was that a couple of the chapters descended into a reference guide.  For example page 159 onwards basically lists UI components and their properties.  And page 87 onwards list the attributes of ADF BC in pretty much the same way as the on line help or developer guide, and I've a personal aversion to any sort of help that says pretty much what the attribute name is e.g. "Precision Rule: this option is used to set a strict precision rule", or "Property Set: this is the property set that has to be applied to the attribute". Hmmm, I think I could have worked that out myself, what I would want to know in a beginners guide are what are these for, what might I use them for...and if I don't need to use them to create an emp/dept example them maybe it’s better to leave them out. All that said, would the book help me - yes it would.  It’s obvious that Vinod knows ADF and his style is relatively easy going and the book covers all that it has to, but I think the book could have done a better job in the educational side of guiding beginners.

  Read the article

• SQLAuthority News – Speaking at Southeast Asia SharePoint Conference 2013 – Singapore

  - by pinaldave

  Two years ago I spoke at Southeast Asia SharePoint Conference 2011, Singapore and I had a fantastic time to present to the Singapore audience. The session was very well received and lots of interest was generated. The event is back again this year and with much bigger scale. I will be presenting on SQL Server and Sharepoint subject at the conference. Session Details: Title: Performance in 60 Seconds – Database Tricks Every SharePoint Developer & Admin MUST Know Abstract: SharePoint Developers and System Administrators often come across situations where they face a slow server response, even though their hardware specifications are above  par. This session is for all the SharePoint Developers who want their server to perform at blazing fast speed but want to invest very little time to make it happen. We will go over various database tricks which require absolutely no time to master and require practically no SQL coding at all. After attending this session, Developers will only need 60 seconds to improve performance of their database server in their SharePoint implementation. Date and Time: January 18, 20013 - 3:15 PM-4:15 PM Location: Max Atria is located at Singapore Expo, 1 Expo Drive, Singapore Tel 65 6403 2160 This session will cover lots of interesting tips and tricks about SQL Server and SharePoint co-exists together. I promise that every attendee will walk out with a trick which they can walk out of session and directly apply to their production server to improve its performance. The event is going to be again fantastic event – if you are in Singapore – you must not miss this event. If you are planning vacation – this is the right time to take days off and travel to Singapore for vacation. The event features over 30 sessions to choose from, focus on three areas of business gain: Exploring Information, Improving Productivity and Making it Work. This event has an excellent line up of international speakers (speakers traveling from the USA, Australia, New Zealand, Sri Lanka and India). Register early to reserve a spot at your choice of more than 30 classes taught by Microsoft Certified Masters, MVPs, and other top SharePoint experts! Here I have attempted to answer a few of the questions which every SharePoint professional half: Which sessions suit my skill level? Click here. What sessions are right for me? Click here. Which sessions are of my interests? Click here. Which sessions are on when? Click here. If you register by next Friday, 14, December – you can save $126 on the regular price of the conference. Prizes, Giveaways and … I love conference goodies – I collect them as a souvenir . This event is known for its generous prizes. The first 100 people to register on the day will get a SPECIAL gift at the event. Additionally there are exhibitor booth give away too. Here is the page listing all the prizes and giveaways. Do leave a comment or send me email if you are going to the event, we can sit together and have a coffee. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

• Indexed view deadlocking

  - by Dave Ballantyne

  Deadlocks can be a really tricky thing to track down the root cause of.  There are lots of articles on the subject of tracking down deadlocks, but seldom do I find that in a production system that the cause is as straightforward.  That being said,  deadlocks are always caused by process A needs a resource that process B has locked and process B has a resource that process A needs.  There may be a longer chain of processes involved, but that is the basic premise. Here is one such (much simplified) scenario that was at first non-obvious to its cause: The system has two tables,  Products and Stock.  The Products table holds the description and prices of a product whilst Stock records the current stock level. USE tempdb GO CREATE TABLE Product ( ProductID INTEGER IDENTITY PRIMARY KEY, ProductName VARCHAR(255) NOT NULL, Price MONEY NOT NULL ) GO CREATE TABLE Stock ( ProductId INTEGER PRIMARY KEY, StockLevel INTEGER NOT NULL ) GO INSERT INTO Product SELECT TOP(1000) CAST(NEWID() AS VARCHAR(255)), ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM sys.columns a CROSS JOIN sys.columns b GO INSERT INTO Stock SELECT ProductID,ABS(CAST(CAST(NEWID() AS VARBINARY(255)) AS INTEGER))%100 FROM Product There is a single stored procedure of GetStock: Create Procedure GetStock as SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 Analysis of the system showed that this procedure was causing a performance overhead and as reads of this data was many times more than writes,  an indexed view was created to lower the overhead. CREATE VIEW vwActiveStock With schemabinding AS SELECT Product.ProductID,Product.ProductName FROM dbo.Product join dbo.Stock on Stock.ProductId = Product.ProductID where Stock.StockLevel <> 0 go CREATE UNIQUE CLUSTERED INDEX PKvwActiveStock on vwActiveStock(ProductID) This worked perfectly, performance was improved, the team name was cheered to the rafters and beers all round.  Then, after a while, something else happened… The system updating the data changed,  The update pattern of both the Stock update and the Product update used to be: BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT BEGIN TRAN UPDATE... COMMIT It changed to: BEGIN TRAN UPDATE... UPDATE... UPDATE... COMMIT Nothing that would raise an eyebrow in even the closest of code reviews.  But after this change we saw deadlocks occuring. You can reproduce this by opening two sessions. In session 1 begin transaction Update Product set ProductName ='Test' where ProductID = 998 Then in session 2 begin transaction Update Stock set Stocklevel = 5 where ProductID = 999 Update Stock set Stocklevel = 5 where ProductID = 998 Hop back to session 1 and.. Update Product set ProductName ='Test' where ProductID = 999 Looking at the deadlock graphs we could see the contention was between two processes, one updating stock and the other updating product, but we knew that all the processes do to the tables is update them.  Period.  There are separate processes that handle the update of stock and product and never the twain shall meet, no reason why one should be requiring data from the other.  Then it struck us,  AH the indexed view. Naturally, when you make an update to any table involved in a indexed view, the view has to be updated.  When this happens, the data in all the tables have to be read, so that explains our deadlocks.  The data from stock is read when you update product and vice-versa. The fix, once you understand the problem fully, is pretty simple, the apps did not guarantee the order in which data was updated.  Luckily it was a relatively simple fix to order the updates and deadlocks went away.  Note, that there is still a *slight* risk of a deadlock occurring, if both a stock update and product update occur at *exactly* the same time.

  Read the article

• Security and the Mobile Workforce

  - by tobyehatch

  Now that many organizations are moving to the BYOD philosophy (bring your own devices), security for phones and tablets accessing company sensitive information is of paramount importance. I had the pleasure to interview Brian MacDonald, Principal Product Manager for Oracle Business Intelligence (BI) Mobile Products, about this subject, and he shared some wonderful insight about how the Oracle Mobile Security Tool Kit is addressing mobile security and doing some pretty cool things.  With the rapid proliferation of phones and tablets, there is a perception that mobile devices are a security threat to corporate IT, that mobile operating systems are not secure, and that there are simply too many ways to inadvertently provide access to critical analytic data outside the firewall. Every day, I see employees working on mobile devices at the airport, while waiting for their airplanes, and using public WIFI connections at coffee houses and in restaurants. These methods are not typically secure ways to access confidential company data. I asked Brian to explain why. “The native controls for mobile devices and applications are indeed insufficiently secure for corporate deployments of Business Intelligence and most certainly for businesses where data is extremely critical - such as financial services or defense - although it really applies across the board. The traditional approach for accessing data from outside a firewall is using a VPN connection which is not a viable solution for mobile. The problem is that once you open up a VPN connection on your phone or tablet, you are creating an opening for the whole device, for all the software and installed applications. Often the VPN connection by itself provides insufficient encryption – if any – which means that data can be potentially intercepted.” For this reason, most organizations that deploy Business Intelligence data via mobile devices will only do so with some additional level of control. So, how has the industry responded? What are companies doing to address this very real threat? Brian explained that “Mobile Device Management (MDM) and Mobile Application Management (MAM) software vendors have rapidly created solutions for mobile devices that provide a vast array of services for controlling, managing and establishing enterprise mobile usage policies. On the device front, vendors now support full levels of encryption behind the firewall, encrypted local data storage, credential management such as federated single-sign-on as well as remote wipe, geo-fencing and other risk reducing features (should a device be lost or stolen). More importantly, these software vendors have created methods for providing these capabilities on a per application basis, allowing for complete isolation of the application from the mobile operating system. Finally, there are tools which allow the applications themselves to be distributed through enterprise application stores allowing IT organizations to manage who has access to the apps, when updates to the applications will happen, and revoke access after an employee leaves. So even though an employee may be using a personal device, access to company data can be controlled while on or near the company premises. So do the Oracle BI mobile products integrate with the MDM and MAM vendors? Brian explained that our customers use a wide variety of mobile security vendors and may even have more than one in-house. Therefore, Oracle is ensuring that users have a choice and a mechanism for linking together Oracle’s BI offering with their chosen vendor’s secure technology. The Oracle BI Mobile Security Toolkit, which is a version of the Oracle BI Mobile HD application, delivered through the Oracle Technology Network (OTN) in its component parts, helps Oracle users to build their own version of the Mobile HD application, sign it with their own enterprise development certificates, link with their security vendor of choice, then deploy the combined application through whichever means they feel most appropriate, including enterprise application stores.  Brian further explained that Oracle currently supports most of the major mobile security vendors, has close relationships with each, and maintains strong partnerships enabling both Oracle and the vendors to test, update and release a cooperating solution in lock-step. Oracle also ensures that as new versions of the Oracle HD application are made available on the Apple iTunes store, the same version is also immediately made available through the Security Toolkit on OTN.  Rest assured that as our workforce continues down the mobile path, company sensitive information can be secured.  To listen to the entire podcast, click here. To learn more about the Oracle BI Mobile HD, click  here To learn more about the BI Mobile Security Toolkit, click here 

  Read the article

• Is It Worth It To Learn Experimental Languages

  - by Xander Lamkins

  I'm a young programmer who desires to work in the field someday as a programmer. I know Java, VB.NET and C#. I want to learn a new language (as I programmer, I know that it is valuable to extend what I know - to learn languages that make you think differently). I took a look online to see what languages were common. Everybody knows C and C++ (even those muggles who know so little about computers in general), so I thought, maybe I should push for C. C and C++ are nice but they are old. Things like Haskell and Forth (etc. etc. etc.) are old and have lost their popularity. I'm scared of learning C (or even C++) for this same reason. Java is pretty old as well and is slow because it's run by the JVM and not compiled to native code. I've been a Windows developer for quite a while. I recently started using Java - but only because it was more versatile and spreadable to other places. The problem is that it doesn't look like a very usable language for these reasons: It's most used purpose is for web application and cellphone apps (specifically Android) As far as actual products made with it, the only things that come to mind are Netbeans, Eclipse (hurrah for making and IDE with the language the IDE is for - it's like making a webpage for writing HTML/CSS/Javascript), and Minecraft which happens to be fun but laggy and bipolar as far as computer spec. support. Other than that it's used for servers but heck - I don't only want to make/configure servers. The .NET languages are nice, however: People laugh if I even mention VB.NET or C# in a serious conversation. It isn't cross-platform unless you use MONO (which is still in development and has some improvements to be made). Lacks low level stuff because, like Java with the JVM, it is run/managed by the CLR. My first thought was learning something like C and then using it to springboard into C++ (just to make sure I would have a strong understanding/base), but like I said earlier, it's getting older and older by the minute. What I've Looked Into Fantom looks nice. It's like a nice middleman between my two favorite languages and even lets me publish between the two interchangeably, but, unlike what I want, it compiles to the CLR or JVM (depending on what you publish it to) instead of it being a complete compile. D also looks nice. It seems like a very usable language and from multiple sources it appears to actually be better than C/C++. I would jump right with it, but I'm still unsure of its success because it obviously isn't very mainstream at this point. There are a couple others that looked pretty nice that focused on other things such as Opa with web development and Go by GOOGLE. My Question Is it worth learning these "experimental" languages? I've read other questions that say that if you aren't constantly learning languages and open to all languages that you aren't in the right mindset for programming. I understand this and I still might not quite be getting it, but in truth, if a language isn't going to become mainstream, should I spend my time learning something else? I don't want to learn old (or any going to soon be old) programming languages. I know that many people see this as something important, *but would any of you ever actually consider (assuming you didn't already know) FORTRAN? My goal is to stay current to make sure I'm successful in the future. Disclaimer Yes, I am a young programmer, so I probably made a lot of naive statements in my question. Feel free to correct me on ANYTHING! I have to start learning somewhere so I'm sure a lot of my knowledge is sketchy enough to have caused to incorrect statements or flaws in my thinking. Please leave any feelings you have in the comments.

  Read the article

• Mind Reading with the Raspberry Pi

  - by speakjava

  Mind Reading With The Raspberry Pi At JavaOne in San Francisco I did a session entitled "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi".  As part of this I showed some demonstrations of things I'd done using Java on the Raspberry Pi.  This is the first part of a series of blog entries that will cover all the different aspects of these demonstrations. A while ago I had bought a MindWave headset from Neurosky.  I was particularly interested to see how this worked as I had had the opportunity to visit Neurosky several years ago when they were still developing this technology.  At that time the 'headset' consisted of a headband (very much in the Bjorn Borg style) with a sensor attached and some wiring that clearly wasn't quite production ready.  The commercial version is very simple and easy to use: there are two sensors, one which rests on the skin of your forehead, the other is a small clip that attaches to your earlobe. Typical EEG sensors used in hospitals require lots of sensors and they all need copious amounts of conductive gel to ensure the electrical signals are picked up.  Part of Neurosky's innovation is the development of this simple dry-sensor technology.  Having put on the sensor and turned it on (it powers off a single AAA size battery) it collects data and transmits it to a USB dongle plugged into a PC, or in my case a Raspberry Pi. From a hacking perspective the USB dongle is ideal because it does not require any special drivers for any complex, low level USB communication.  Instead it appears as a simple serial device, which on the Raspberry Pi is accessed as /dev/ttyUSB0.  Neurosky have published details of the command protocol.  In addition, the MindSet protocol document, including sample code for parsing the data from the headset, can be found here. To get everything working on the Raspberry Pi using Java the first thing was to get serial communications going.  Back in the dim distant past there was the Java Comm API.  Sadly this has grown a bit dusty over the years, but there is a more modern open source project that provides compatible and enhanced functionality, RXTXComm.  This can be installed easily on the Pi using sudo apt-get install librxtx-java.  Next I wrote a library that would send commands to the MindWave headset via the serial port dongle and read back data being sent from the headset.  The design is pretty simple, I used an event based system so that code using the library could register listeners for different types of events from the headset.  You can download a complete NetBeans project for this here.  This includes javadoc API documentation that should make it obvious how to use it (incidentally, this will work on platforms other than Linux.  I've tested it on Windows without any issues, just by changing the device name to something like COM4). To test this I wrote a simple application that would connect to the headset and then print the attention and meditation values as they were received from the headset.  Again, you can download the NetBeans project for that here. Oracle recently released a developer preview of JavaFX on ARM which will run on the Raspberry Pi.  I thought it would be cool to write a graphical front end for the MindWave data that could take advantage of the built in charts of JavaFX.  Yet another NetBeans project is available here.  Screen shots of the app, which uses a very nice dial from the JFxtras project, are shown below. I probably should add labels for the EEG data so the user knows which is the low alpha, mid gamma waves and so on.  Given that I'm not a neurologist I suspect that it won't increase my understanding of what the (rather random looking) traces mean. In the next blog I'll explain how I connected a LEGO motor to the GPIO pins on the Raspberry Pi and then used my mind to control the motor!

  Read the article

• Managing game state / 'what to update' within an XNA game 'screen'

  - by codinghands

  Note - having read through other GDev questions suggested when writing this question I'm confident this isn't a dupe. Of course, it's 3am and I'm likely wrong, so please mod as such if so. I'm trying to figure out how best to manage state within my game screens - please bare with me though! At the moment I'm using a heavily modified version of the fantastic game state management example on the XNA site available here. This is working perfectly for my 'Screens' - 'IntroScreen' with some shiny logos, 'TitleScreen' and a 'MenuScreen' stacked on top for the title and menu, 'PlayScreen' for the actual gameplay, etc. Each screen has the a bunch of sprites, and an 'Update' and 'Draw', managed by a 'ScreenManager'. In addition to the above, and as suggested as an answer to my other question here, most screens have a 'GameProcessQueue' class full of 'GameProcess'es which lets me do just about anything (animations, youbetcha!), in any order, in sequence or parallel. Why mention all this? When I talk about managing game state I'm thinking more for complex scenarios within a 'Screen'. 'TitleScreen', 'MenuScreen' and the like are all relatively simple. 'Play Screen' less so. How do people manage the different 'states' within the screen (or whatever you call it) that 'does' gameplay? (for me, the 'PlayScreen') I've thought about the following: Enum of different states in the Screen, 'activeState' enum-type variable, switching on the enum in the Screen Update() loop to determine what Screen Update 'sub'-function is called. I can see this getting hairy pretty fast though as screens get more complex and with the 'PlayScreen' becoming a behemoth mega-class. 'State' class with Update loop - a Screen can have any number of 'States', 1+ of which are 'active'. Screen update loop calls update on all active states. States themselves know which screen they belong to, and may even belong to a 'StateManager' which handles transitioning from one state to the next. Once a state is over it's removed from the ScreenState list. The Screen doesn't need a bunch of GameProcessQueues, each State has its own. Abstract Screen further to be more flexible - I can see the similarities between what I've got (game 'Screens' handled by a ScreenManager) and what I want (states within a screen, and a mechanism to manage them). However at the moment I see 'Screens' as high level and very distinct ('PlayScreen' with baddies != 'MenuScreen' with 4 words and event handlers), where as my proposed 'States' are more intrinsically tied to a specific screen with complex requirements. I think. This is for a turn-based board game, so it's easier to define things as a discrete series of steps (IntroAnimation - P1Turn - P2Turn - P1Turn ... - GameOver - .... Obviously with an open-world RPG things are very different, but any advice in this scenario is appreciated. If I'm just going OOP-crazy please say so. Similarly I'm concious there's a huge amount on this site re: state management. But as my first 'serious' game after a couple of false starts I'd like to get this right, and would rather be harassed and modded down than never ask :)

  Read the article

• Be the surgeon

  - by Rob Farley

  It’s a phrase I use often, especially when teaching, and I wish I had realised the concept years earlier. (And of course, fits with this month’s T-SQL Tuesday topic, hosted by Argenis Fernandez) When I’m sick enough to go to the doctor, I see a GP. I used to typically see the same guy, but he’s moved on now. However, when he has been able to roughly identify the area of the problem, I get referred to a specialist, sometimes a surgeon. Being a surgeon requires a refined set of skills. It’s why they often don’t like to be called “Doctor”, and prefer the traditional “Mister” (the history is that the doctor used to make the diagnosis, and then hand the patient over to the person who didn’t have a doctorate, but rather was an expert cutter, typically from a background in butchering). But if you ask the surgeon about the pain you have in your leg sometimes, you’ll get told to ask your GP. It’s not that your surgeon isn’t interested – they just don’t know the answer. IT is the same now. That wasn’t something that I really understood when I got out of university. I knew there was a lot to know about IT – I’d just done an honours degree in it. But I also knew that I’d done well in just about all my subjects, and felt like I had a handle on everything. I got into developing, and still felt that having a good level of understanding about every aspect of IT was a good thing. This got me through for the first six or seven years of my career. But then I started to realise that I couldn’t compete. I’d moved into management, and was spending my days running projects, rather than writing code. The kids were getting older. I’d had a bad back injury (ask anyone with chronic pain how it affects  your ability to concentrate, retain information, etc). But most of all, IT was getting larger. I knew kids without lives who knew more than I did. And I felt like I could easily identify people who were better than me in whatever area I could think of. Except writing queries (this was before I discovered technical communities, and people like Paul White and Dave Ballantyne). And so I figured I’d specialise. I wish I’d done it years earlier. Now, I can tell you plenty of people who are better than me at any area you can pick. But there are also more people who might consider listing me in some of their lists too. If I’d stayed the GP, I’d be stuck in management, and finding that there were better managers than me too. If you’re reading this, SQL could well be your thing. But it might not be either. Your thing might not even be in IT. Find out, and then see if you can be a world-beater at it. But it gets even better, because you can find other people to complement the things that you’re not so good at. My company, LobsterPot Solutions, has six people in it at the moment. I’ve hand-picked those six people, along with the one who quit. The great thing about it is that I’ve been able to pick people who don’t necessarily specialise in the same way as me. I don’t write their T-SQL for them – generally they’re good enough at that themselves. But I’m on-hand if needed. Consider Roger Noble, for example. He’s doing stuff in HTML5 and jQuery that I could never dream of doing to create an amazing HTML5 version of PivotViewer. Or Ashley Sewell, a guy who does project management far better than I do. I could go on. My team is brilliant, and I love them to bits. We’re all surgeons, and when we work together, I like to think we’re pretty good! @rob_farley

  Read the article

• How Do You Actually Model Data?

  Since the 1970’s Developers, Analysts and DBAs have been able to represent concepts and relations in the form of data through the use of generic symbols.  But what is data modeling?  The first time I actually heard this term I could not understand why anyone would want to display a computer on a fashion show runway. Hey, what do you expect? At that time I was a freshman in community college, and obviously this was a long time ago.  I have since had the chance to learn what data modeling truly is through using it. Data modeling is a process of breaking down information and/or requirements in to common categories called objects. Once objects start being defined then relationships start to form based on dependencies found amongst other existing objects.  Currently, there are several tools on the market that help data designer actually map out objects and their relationships through the use of symbols and lines.  These diagrams allow for designs to be review from several perspectives so that designers can ensure that they have the optimal data design for their project and that the design is flexible enough to allow for potential changes and/or extension in the future. Additionally these basic models can always be further refined to show different levels of details depending on the target audience through the use of three different types of models. Conceptual Data Model(CDM)Conceptual Data Models include all key entities and relationships giving a viewer a high level understanding of attributes. Conceptual data model are created by gathering and analyzing information from various sources pertaining to a project during the typical planning phase of a project. Logical Data Model (LDM)Logical Data Models are conceptual data models that have been expanded to include implementation details pertaining to the data that it will store. Additionally, this model typically represents an origination’s business requirements and business rules by defining various attribute data types and relationships regarding each entity. This additional information can be directly translated to the Physical Data Model which reduces the actual time need to implement it. Physical Data Model(PDMs)Physical Data Model are transformed Logical Data Models that include the necessary tables, columns, relationships, database properties for the creation of a database. This model also allows for considerations regarding performance, indexing and denormalization that are applied through database rules, data integrity. Further expanding on why we actually use models in modern application/database development can be seen in the benefits that data modeling provides for data modelers and projects themselves, Benefits of Data Modeling according to Applied Information Science Abstraction that allows data designers remove concepts and ideas form hard facts in the form of data. This gives the data designers the ability to express general concepts and/or ideas in a generic form through the use of symbols to represent data items and the relationships between the items. Transparency through the use of data models allows complex ideas to be translated in to simple symbols so that the concept can be understood by all viewpoints and limits the amount of confusion and misunderstanding. Effectiveness in regards to tuning a model for acceptable performance while maintaining affordable operational costs. In addition it allows systems to be built on a solid foundation in terms of data. I shudder at the thought of a world without data modeling, think about it? Data is everywhere in our lives. Data modeling allows for optimizing a design for performance and the reduction of duplication. If one was to design a database without data modeling then I would think that the first things to get impacted would be database performance due to poorly designed database and there would be greater chances of unnecessary data duplication that would also play in to the excessive query times because unneeded records would need to be processed. You could say that a data designer designing a database is like a box of chocolates. You will never know what kind of database you will get until after it is built.

  Read the article

• Iterative and Incremental Principle Series 4: Iteration Planning – (a.k.a What should I do today?)

  - by llowitz

  Welcome back to the fourth of a five part series on applying the Iteration and Incremental principle.  During the last segment, we discussed how the Implementation Plan includes the number of the iterations for a project, but not the specifics about what will occur during each iteration.  Today, we will explore Iteration Planning and discuss how and when to plan your iterations. As mentioned yesterday, OUM prescribes initially planning your project approach at a high level by creating an Implementation Plan.  As the project moves through the lifecycle, the plan is progressively refined.  Specifically, the details of each iteration is planned prior to the iteration start. The Iteration Plan starts by identifying the iteration goal.  An example of an iteration goal during the OUM Elaboration Phase may be to complete the RD.140.2 Create Requirements Specification for a specific set of requirements.  Another project may determine that their iteration goal is to focus on a smaller set of requirements, but to complete both the RD.140.2 Create Requirements Specification and the AN.100.1 Prepare Analysis Specification.  In an OUM project, the Iteration Plan needs to identify both the iteration goal – how far along the implementation lifecycle you plan to be, and the scope of work for the iteration.  Since each iteration typically ranges from 2 weeks to 6 weeks, it is important to identify a scope of work that is achievable, yet challenging, given the iteration goal and timeframe.  OUM provides specific guidelines and techniques to help prioritize the scope of work based on criteria such as risk, complexity, customer priority and dependency.  In OUM, this prioritization helps focus early iterations on the high risk, architecturally significant items helping to mitigate overall project risk.  Central to the prioritization is the MoSCoW (Must Have, Should Have, Could Have, and Won’t Have) list.   The result of the MoSCoW prioritization is an Iteration Group.  This is a scope of work to be worked on as a group during one or more iterations.  As I mentioned during yesterday’s blog, it is pointless to plan my daily exercise in advance since several factors, including the weather, influence what exercise I perform each day.  Therefore, every morning I perform Iteration Planning.   My “Iteration Plan” includes the type of exercise for the day (run, bike, elliptical), whether I will exercise outside or at the gym, and how many interval sets I plan to complete.    I use several factors to prioritize the type of exercise that I perform each day.  Since running outside is my highest priority, I try to complete it early in the week to minimize the risk of not meeting my overall goal of doing it twice each week.  Regardless of the specific exercise I select, I follow the guidelines in my Implementation Plan by applying the 6-minute interval sets.  Just as in OUM, the iteration goal should be in context of the overall Implementation Plan, and the iteration goal should move the project closer to achieving the phase milestone goals. Having an Implementation Plan details the strategy of what I plan to do and keeps me on track, while the Iteration Plan affords me the flexibility to juggle what I do each day based on external influences thus maximizing my overall success. Tomorrow I’ll conclude the series on applying the Iterative and Incremental approach by discussing how to manage the iteration duration and highlighting some benefits of applying this principle.

  Read the article

• jtreg update, December 2012

  - by jjg

  There is a new version of jtreg available. The primary new feature is support for tests that have been written for use with TestNG, the popular open source testing framework. TestNG is supported by a variety of tools and plugins, which means that it is now possible to develop tests for OpenJDK using those tools, while still retaining the ability to have the tests be part of the OpenJDK test suite, and run with a single test harness, jtreg. jtreg can be downloaded from the OpenJDK jtreg page: http://openjdk.java.net/jtreg. TestNG support jtreg supports both single TestNG tests, which can be freely intermixed with other types of jtreg tests, and groups of TestNG tests. A single TestNG test class can be compiled and run by providing a test description using the new action tag: @run testng classname The test will be executed by using org.testng.TestNG. No main method is required. A group of TestNG tests organized in a standard package hierarchy can also be compiled and run by jtreg. Any such group must be identified by specifying the root directory of the package hierarchy. You can either do this in the top level TEST.ROOT file, or in a TEST.properties file in any subdirectory enclosing the group of tests. In either case, add a line to the file of the form: TestNG.dirs = dir ... Directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. In particular, note that you can simply use "TestNG.dirs = ." in a TEST.properties file in the root directory of the test group's package hierarchy. No additional test descriptions are necessary, but test descriptions containing information tags, such as @bug, @summary, etc are permitted. All the Java source files in the group will be compiled if necessary, before any of the tests in the group are run. The selected tests within the group will be run, one at a time, using org.testng.TestNG. Library classes The specification for the @library tag has been extended so that any paths beginning with '/' will be evaluated relative to the root directory of the test suite. In addition, some bugs have been fixed that prevented sharing the compiled versions of library classes between tests in different directories. Note: This has uncovered some issues in tests that use a combination of @build and @library tags, such that some tests may fail unexpectedly with ClassNotFoundException. The workaround for now is to ensure that library classes are listed before the test classes in any @build tags. To specify one or more library directories for a group of TestNG tests, add a line of the following form to the TEST.properties file in the root directory of the group's package hierarchy: lib.dirs = dir ... As before, directories beginning with '/' are evaluated relative to the root directory of the test suite; otherwise they are evaluated relative to the directory containing the declaring file. The libraries will be available to all classes in the group; you cannot specify different libraries for different tests within the group. Coming soon ... From this point on, jtreg development will be using the new jtreg repository in the OpenJDK code-tools project. There is a new email alias jtreg-dev at openjdk.java.net for discussions about jtreg development. The existing alias jtreg-use at openjdk.java.net will continue to be available for questions about using jtreg. For more information ... An updated version of the jtreg Tag Language Specification is being prepared, and will be made available when it is ready. In the meantime, you can find more information about the support for TestNG by executing the following command: $ jtreg -onlinehelp TestNG For more information on TestNG itself, visit testng.org.

  Read the article

• Programmatically disclosing a node in af:tree and af:treeTable

  - by Frank Nimphius

  A common developer requirement when working with af:tree or af:treeTable components is to programmatically disclose (expand) a specific node in the tree. If the node to disclose is not a top level node, like a location in a LocationsView -> DepartmentsView -> EmployeesView hierarchy, you need to also disclose the node's parent node hierarchy for application users to see the fully expanded tree node structure. Working on ADF Code Corner sample #101, I wrote the following code lines that show a generic option for disclosing a tree node starting from a handle to the node to disclose. The use case in ADF Coder Corner sample #101 is a drag and drop operation from a table component to a tree to relocate employees to a new department. The tree node that receives the drop is a department node contained in a location. In theory the location could be part of a country and so on to indicate the depth the tree may have. Based on this structure, the code below provides a generic solution to parse the current node parent nodes and its child nodes. The drop event provided a rowKey for the tree node that received the drop. Like in af:table, the tree row key is not of type oracle.jbo.domain.Key but an implementation of java.util.List that contains the row keys. The JUCtrlHierBinding class in the ADF Binding layer that represents the ADF tree binding at runtime provides a method named findNodeByKeyPath that allows you to get a handle to the JUCtrlHierNodeBinding instance that represents a tree node in the binding layer. CollectionModel model = (CollectionModel) your_af_tree_reference.getValue(); JUCtrlHierBinding treeBinding = (JUCtrlHierBinding ) model.getWrappedData(); JUCtrlHierNodeBinding treeDropNode = treeBinding.findNodeByKeyPath(dropRowKey); To disclose the tree node, you need to create a RowKeySet, which you do using the RowKeySetImpl class. Because the RowKeySet replaces any existing row key set in the tree, all other nodes are automatically closed. RowKeySetImpl rksImpl = new RowKeySetImpl(); //the first key to add is the node that received the drop //operation (departments).            rksImpl.add(dropRowKey);    Similar, from the tree binding, the root node can be obtained. The root node is the end of all parent node iteration and therefore important. JUCtrlHierNodeBinding rootNode = treeBinding.getRootNodeBinding(); The following code obtains a reference to the hierarchy of parent nodes until the root node is found. JUCtrlHierNodeBinding dropNodeParent = treeDropNode.getParent(); //walk up the tree to expand all parent nodes while(dropNodeParent != null && dropNodeParent != rootNode){    //add the node's keyPath (remember its a List) to the row key set    rksImpl.add(dropNodeParent.getKeyPath());      dropNodeParent = dropNodeParent.getParent(); } Next, you disclose the drop node immediate child nodes as otherwise all you see is the department node. Its not quite exactly "dinner for one", but the procedure is very similar to the one handling the parent node keys ArrayList<JUCtrlHierNodeBinding> childList = (ArrayList<JUCtrlHierNodeBinding>) treeDropNode.getChildren();                     for(JUCtrlHierNodeBinding nb : childList){   rksImpl.add(nb.getKeyPath()); } Next, the row key set is defined as the disclosed row keys on the tree so when you refresh (PPR) the tree, the new disclosed state shows tree.setDisclosedRowKeys(rksImpl); AdfFacesContext.getCurrentInstance().addPartialTarget(tree.getParent()); The refresh in my use case is on the tree parent component (a layout container), which usually shows the best effect for refreshing the tree component. 

  Read the article

• On The Road with the HR Community

  - by Kathryn Perry

  A guest post by Steve Boese, Director, Talent Strategy, Oracle One of the best ways to connect with and to get a feel for what is on the minds of Human Resources leaders is to get out of the office and hit the road. I’ve had the great honor to attend and/or present at a number of events recently, including the massive SHRM Annual Conference, the HR Florida Conference, and Taleo World in Chicago. These events, and many others, offer solution providers, talent management professionals, business leaders, and even more casual observers of the Human Resources field with tremendous opportunities to connect, to share information, and to learn from each other. Attending the conferences also give people a sense of how they can improve and enhance their skills and knowledge, learn about the latest workforce technologies, and bring new and innovative ideas back to their organizations. And sure, the parties and conference swag can be pretty nice as well! If you attend a few of these industry events, one of the most beneficial by-products that you can emerge with -- whether you are on the front lines in HR at your organization, or as we are at Oracle, in the business of developing and delivering innovative and impactful technology solutions to our customers -- is to get a larger sense of the big ideas and major trends, concerns, and challenges facing organizations all across the landscape, and to be able to better understand how your strategies and solutions can be improved with this greater perspective. So what are HR folks discussing and debating? What questions and problems keep them up at night? What are the bloggers and large community of HR social media enthusiasts buzzing about? From my perspective some of the common themes you see over and again across the HR community break down (broadly), into three main areas: Talent attraction - How can we locate, attract, recruit, and hire the best talent possible? What new strategies, approaches, and technologies can help us in this critically important area? What role do external social networks like LinkedIn, Facebook, and Twitter play in the increasingly competitive search for talent? Talent Retention - How can we make sure to keep that talent on our team? What engagement, development, recognition, and compensation tools can help us in this regard? How can we continue, (or become), an employer of choice? What is our unique and compelling employer value proposition? Talent Empowerment - How can we put our employees in the best position to succeed? What can we do to better align our talent with the organization’s mission and goals, while simultaneously providing the best and most driven to succeed individuals a clear path to achieve their career goals and aspirations? How can new technologies, particularly social and collaboration tools help in this area? While these are the ‘big themes’ that I know I have seen this year, certainly they are not really new, nor are they likely to fundamentally change in the next year or two. I think the reason is that at the core of any successful enterprise is a collection of smart, interested, engaged, challenged, and empowered group of people. And that was likely the case 10 or 20 years ago, and will probably be the case 10 or 20 years into the future. But what has changed, and what you can see -- evidenced by simply following the Twitter backchannel for an event and by reading some of the many fantastic HR blogs out there -- is that the HR professional's ability, along with technology solution providers like Oracle, to connect, to more openly share information with each other, and to make each other better in the process, (and to create new, improved, and more innovative solutions), has never been greater. And I think it is with this heretofore unprecedented level of opportunity to connect with other members of the community that HR professionals will be better equipped to help their organizations attract, retain, and empower their teams. We at Oracle HCM look forward to continuing to meet, engage, and connect with the HR community in the coming months. Until then -- follow us on Twitter and Facebook.

  Read the article

• Sunshine after the iCloud release?

  - by Laila

  "Why should I believe them? They're the ones that brought us MobileMe? It was not our finest hour, but we learned a lot." Steve Jobs June 6th 2011 Apple's new cloud service has been met with uncritical excitement by industry commentators.  It is wonderful what a rename can do.  Apple has had a 'cloud' offering for three years called MobileMe, successor to .MAC and  iTools, so iCloud is now the fourth internet service Apple have attempted. If this had been Microsoft, there would have been catcalls all around the blogosphere.  I'll admit that there is a lot more functionality announced for iCloud than MobileMe has ever managed to achieve, but then almost anything has more functionality than MobileMe.  It's an expensive service (£120 a year in the UK, $90 in the states), launched as far back as  June 9, 2008, that has delivered very little and suffered a string of technical problems; the documentation was mainly  a community effort, built up gradually by the frustrated and angry users. It was supposed to synchronise PC Outlook calendars but couldn't manage Microsoft Exchange (Google could, of course). It used WebDAV to allow Windows users to attach to the filestore, but didn't document how to do it. The method for downloading and uploading files to the cloud-based filestore was ridiculously clunky. It allowed you to post photos on a public site, but forgot to include a way of deleting photos. I could go on with the list, but you can explore the many sites that have flourished to inhabit the support-vacuum left by Apple. MobileMe should have had all the bright new clever things announced for iCloud. Apple dropped the ball, and allowed services such as Flickr to fill the void. However, their PR skills are such that, a name-change later (the .ME.com email address remains), it has turned a rout into a victory, and hundreds of earnest bloggers have been extolling Apple's expertise in cloud matters. This must be frustrating for the other cloud providers who have quietly got the technology working right. I wish iCloud well, even though I resent the expensive mess they made of MobileMe. Apple promise that iCloud will sync files, apps, app data, and media across all the different iOS5 devices, Macs, and PCs. It also hopes to sync music across devices, but not video content. They've offered existing MobileMe users free use of the MobileMe service for a year as the product is morphed, and they will be able to transfer to iCloud when it is launched in the autumn.  On June 30, 2012, MobileMe will die, and Apple's iWeb is also soon to join iTools and .MAC in the hereafter. So why get excited about iCloud? That all depends on the level of PC integration. Whereas iOS5 machines will be full participants in the new world of data-sharing (Sorry iPod Touch users) what about .NET libraries? There is talk of synchronising 'My Pictures' libraries with iOS5 and iMac machines, but little more detail as yet. Apple has a lot to prove with iCloud and anyone with actual experience of their past attempts to get into cloud services will be wary.

  Read the article

• What You Can Learn from the NFL Referee Lockout

  - by Christina McKeon

  American football is a lot like religion. The fans are devoted followers that take brand loyalty to a whole new level. These fans that worship their teams each week showed that they are powerful customers whose voice has an impact. Yesterday, these fans proved that their opinion could force the hand of a large and powerful institution. With a three-month NFL referee lockout that seemed like it was nowhere close to resolution, the Green Bay Packers and the Seattle Seahawks competed last Monday night. For those of you that might have been out of the news cycle the past few days, Green Bay lost the game due to a controversial call that many experts and analysts agree should have resulted in Green Bay winning the game. Outrage ensued. The NFL had pulled replacement referees from the high school ranks, and these replacements did not have the knowledge and experience to handle high intensity NFL games. Fans protested about their customer experience. Their anger-filled rants were heard in social media, in the headlines of newspapers, on radio, and on national TV. Suddenly, the NFL was moved to reach an agreement with the referees. That agreement was reached late in the night on Wednesday with many believing that the referees had the upper hand forcing the owners into submission. Some might argue that the referees benefited, not the fans. Since the fans wanted qualified and competent referees, I would say the fans did benefit. The referees are scheduled to return to the field this Sunday, so the fans got what they wanted. What can you learn from this negative customer experience? Customers are in control. NFL owners thought they were controlling this situation with the upper hand over referees. The owners figured out they weren’t in control when their fans reacted negatively. Customers can make or break you more now than ever before, which is why it is more important to connect with them, engage them in a personal manner, and create rewarding relationships. Protect your brand. Whether knowingly or unknowingly, the NFL put their brand and each team’s brand at risk with replacement referees. Think about each business decision you make, and how it may impact your brand at different points in time. A decision that results in a gain today could result in a larger loss down the road. Customer experience matters. The NFL likely foresaw declining revenues in ticket sales, merchandising, advertising, and other areas if the lockout continued. While fans primarily spoke with their minds in the days following the Green Bay debacle, their wallets would be the next things to speak. Customer experience directly affects your success and is one of the few areas where you can differentiate your business. What would you do if your brand got such negative attention? Would you be prepared to navigate such stormy waters? Would you be able to prevent such a fiasco? If you don’t have a good answer to these questions, consider joining us October 3-5, 2012 at the Oracle Customer Experience Summit in San Francisco. You’ll have the opportunity to learn even more about customer experience from industry experts such as best-selling author Seth Godin, Paul Hagen and Kerry Bodine from Forrester Research, Inc., George Kembel from the Stanford d.School, Bruce Temkin of The Temkin Group, and Gene Alvarez from Gartner Inc.. There will also be plenty of your peers and customer experience experts available for networking and discussions.

  Read the article

• ArchBeat Link-o-Rama for 2012-06-29

  - by Bob Rhubart

  Backward-compatible vs. forward-compatible: a tale of two clouds | William Vambenepe "There is the Cloud that provides value by requiring as few changes as possible. And there is the Cloud that provides value by raising the abstraction and operation level," says William Vambenepe. "The backward-compatible Cloud versus the forward-compatible Cloud." Vambenepe was a panelist on the recent ArchBeat podcast Public, Private, and Hybrid Clouds. Andrejus Baranovskis's Blog: ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) Oracle ACE Director Andrejus Baranovskis investigates "how you can customize a standard BPM Task Flow through MDS Seeded customization." Oracle OpenWorld 2012 Music Festival If, after a day spent in sessions at Oracle Openworld, you want nothing more than to head back to your hotel for a quiet evening spent responding to email, please ignore the rest of this message. Because every night from Sept 30 to Oct 4 the streets of San Francisco will pulsate with music from a vast array of bands representing more musical styles than a single human brain an comprehend. It's the first ever Oracle Music Festival, baby, 7:00pm to 1:00am every night. Are those emails that important...? Resource Kit: Oracle Exadata - includes demos, videos, product datasheets, and technical white papers. This free resource kit includes several customer case study videos, two 3D product demos, several product datasheets, and three technical architecture white papers. Registration is required for the who don't already have a free Oracle.com membership account. Some execs contemplate making 'Bring Your Own Device' mandatory | ZDNet "Companies and agencies are recognizing that individual employees are doing a better job of handling and managing their devices than their harried and overworked IT departments – who need to focus on bigger priorities, such as analytics and cloud," says ZDNet SOA blogger Joe McKendrick. Podcast Show Notes: Public, Private, and Hybrid Clouds All three parts of this discussion are now available. Featuring a panel of leading Oracle cloud computing experts, including Dr. James Baty, Mark T. Nelson, Ajay Srivastava, and William Vambenepe, the discussion covers an overview of the various flavors of cloud computing, the importance of standards, Why cloud computing is a paradigm shift—and why it isn't, and advice on what architects need to know to take advantage of the cloud. And for those who prefer reading to listening, a complete transcript is also available. Amazon AMIs and Oracle VM templates (Cloud Migrations) Cloud migration expert Tom Laszewski shares an objective comparison of these two resources. IOUC : Blogs : Read the latest news on the global user group community - June 2012! The June 2012 edition of "Are You a Member Yet?"—the quarterly newsletter about Oracle user group communities around the world. Webcast: Introducing Identity Management 11g R2 - July 19 Date: Thursday, July 19, 2012 Time: 10am PT / 1pm ET Please join Oracle and customer executives for the launch of Oracle Identity Management 11g R2, the breakthrough technology that dramatically expands the reach of identity management to cloud and mobile environments. Thought for the Day "The most important single aspect of software development is to be clear about what you are trying to build." — Bjarne Stroustrup Source: SoftwareQuotes.com

  Read the article

• SQL SERVER – Importance of User Without Login

  - by pinaldave

  Some questions are very open ended and it is very hard to come up with exact requirements. Here is one question I was asked in recent User Group Meeting. Question: “In recent version of SQL Server we can create user without login. What is the use of it?” Great question indeed. Let me first attempt to answer this question but after reading my answer I need your help. I want you to help him as well with adding more value to it. Answer: Let us visualize a scenario. An application has lots of different operations and many of them are very sensitive operations. The common practice was to do give application specific role which has more permissions and access level. When a regular user login (not system admin), he/she might have very restrictive permissions. The application itself had a user name and password which means applications can directly login into the database and perform the operation. Developers were well aware of the username and password as it was embedded in the application. When developer leaves the organization or when the password was changed, the part of the application had to be changed where the same username and passwords were used. Additionally, developers were able to use the same username and password and login directly to the same application. In earlier version of SQL Server there were application roles. The same is later on replaced by “User without Login”. Now let us recreate the above scenario using this new “User without Login”. In this case, User will have to login using their own credentials into SQL Server. This means that the user who is logged in will have his/her own username and password. Once the login is done in SQL Server, the user will be able to use the application. Now the database should have another User without Login which has all the necessary permissions and rights to execute various operations. Now, Application will be able to execute the script by impersonating “user without login – with more permissions”. Here there is assumed that user login does not have enough permissions and another user (without login) there are more rights. If a user knows how the application is using the database and their various operations, he can switch the context to user without login making him enable for doing further modification. Make sure to explicitly DENY view definition permission on the database. This will make things further difficult for user as he will have to know exact details to get additional permissions. If a user is System Admin all the details which I just mentioned in above three paragraphs does not apply as admin always have access to everything. Additionally, the method describes above is just one of the architecture and if someone is attempting to damage the system, they will still be able to figure out a workaround. You will have to put further auditing and policy based management to prevent such incidents and accidents. I guess this is my answer. I read it multiple times but I still feel that I am missing something. There should be more to this concept than what I have just described. I have merely described one scenario but there will be many more scenarios where this situation will be useful. Now is your turn to help – please leave a comment with the additional suggestion where exactly “User without Login” will be useful as well did I miss anything when I described above scenario. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Is it worth to learn Experimental Languages?

  - by Xander Lamkins

  I'm a young programmer who desires to work in the field someday as a programmer. I know Java, VB.NET and C#. I want to learn a new language (as I programmer, I know that it is valuable to extend what I know - to learn languages that make you think differently). I took a look online to see what languages were common. Everybody knows C and C++ (even those muggles who know so little about computers in general), so I thought, maybe I should push for C. C and C++ are nice but they are old. Things like Haskell and Forth (etc. etc. etc.) are old and have lost their popularity. I'm scared of learning C (or even C++) for this same reason. Java is pretty old as well and is slow because it's run by the JVM and not compiled to native code. I've been a Windows developer for quite a while. I recently started using Java - but only because it was more versatile and spreadable to other places. The problem is that it doesn't look like a very usable language for these reasons: It's most used purpose is for web application and cellphone apps (specifically Android) As far as actual products made with it, the only things that come to mind are Netbeans, Eclipse (hurrah for making and IDE with the language the IDE is for - it's like making a webpage for writing HTML/CSS/Javascript), and Minecraft which happens to be fun but laggy and bipolar as far as computer spec. support. Other than that it's used for servers but heck - I don't only want to make/configure servers. The .NET languages are nice, however: People laugh if I even mention VB.NET or C# in a serious conversation. It isn't cross-platform unless you use MONO (which is still in development and has some improvements to be made). Lacks low level stuff because, like Java with the JVM, it is run/managed by the CLR. My first thought was learning something like C and then using it to springboard into C++ (just to make sure I would have a strong understanding/base), but like I said earlier, it's getting older and older by the minute. What I've Looked Into Fantom looks nice. It's like a nice middleman between my two favorite languages and even lets me publish between the two interchangeably, but, unlike what I want, it compiles to the CLR or JVM (depending on what you publish it to) instead of it being a complete compile. D also looks nice. It seems like a very usable language and from multiple sources it appears to actually be better than C/C++. I would jump right with it, but I'm still unsure of its success because it obviously isn't very mainstream at this point. There are a couple others that looked pretty nice that focused on other things such as Opa with web development and Go by GOOGLE. My Question Is it worth learning these "experimental" languages? I've read other questions that say that if you aren't constantly learning languages and open to all languages that you aren't in the right mindset for programming. I understand this and I still might not quite be getting it, but in truth, if a language isn't going to become mainstream, should I spend my time learning something else? I don't want to learn old (or any going to soon be old) programming languages. I know that many people see this as something important, *but would any of you ever actually consider (assuming you didn't already know) FORTRAN? My goal is to stay current to make sure I'm successful in the future. Disclaimer Yes, I am a young programmer, so I probably made a lot of naive statements in my question. Feel free to correct me on ANYTHING! I have to start learning somewhere so I'm sure a lot of my knowledge is sketchy enough to have caused to incorrect statements or flaws in my thinking. Please leave any feelings you have in the comments.

  Read the article

< Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >