Search Results

Search found 20049 results on 802 pages for 'virtual drive'.

Page 552/802 | < Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >

• Confusion about HSRP Groups

  - by Kyle Brandt

  If I have a router that has several LANs on it, and each of these LAN is attached to a second router, do I need to use different HSRP groups for each LAN? With this set up, each virtual gateway will be on a Layer 2 segment. And within a router, no interface will have multiple gateways. So, For example: Router 1: F0/0: ip address 192.168.1.2 255.255.255.0 standby ip 192.168.1.1 F2/0: ip address 192.168.2.2 255.255.255.0 standby ip 192.168.2.1 Router 2: F0/0: ip address 192.168.1.3 255.255.255.0 standby ip 192.168.1.1 F2/0: ip address 192.168.2.3 255.255.255.0 standby ip 192.168.2.1 Will this work, or do I need standby 1 ip 192.168.2.1 on the F2/0 interfaces? Since according to the RFC, the group number of the packet is in the HSRP multicast packets, my guess is that I don't need different groups, and that multiple groups are only needed when they are all on the same Layer 2 segment. However, I haven't been able to find this setup....

  Read the article

• Big IP F5 outbound HTTP issues

  - by mbuk2k

  We've tried upgrading from 9.x to 10.2 on our F5 Big IP 3400 and everything went over fine apart from one thing. We're unable to establish any outbound HTTP (80) connections from any servers that are assigned to a virtual server. This is something that worked before and is required for certain calls our servers need to make. Interestingly HTTPS (443) connections work fine, it's literally just anything outbound over port 80 seems to fail. Does anyone know if anything has changed between 9.4 and 10.2 that would mean additional config would need to be made to allow for external HTTP connections? Any advice would be appreciated, thank you

  Read the article

• Troubles uploading big pics to Picassa when pics are on NAS

  - by Bascy

  Hi all, I'm working from Vista a laptop on a WLAN, my pictures are all on a shared (samba) network drive on a FreeNAS system, which has a wired network connection to the WLAN router (DLink 655). I'v noticed that when i try to upload pics to picassa, and select files from the network share the pics won't upload successfully. If i first copy them locally (on the laptop) and then upload them to picassa, everything works fine. If i try to copy smaller pics (<500kB) it doesnt go wrong Anybody know what is going wrong here?

  Read the article

• Windows Server Backup - Can I restore to a particular revision?

  - by hamlin11

  I'm using Windows Server Backup in Windows Server 2008 to do a scheduled daily backup to a dedicated hard-drive on the server. I noticed that under "All backups" it says I have 45 copies. Does this mean that I can restore to any revision of my data upon system failure? If the answer is yes, then I don't have to worry about taking monthly or weekly snapshots of my data. I'm concerned about a data corruption event occurring that working its way into my backups... then not having a clean snapshot to go back to. Thanks!

  Read the article

• Multiple External IP Ranges on a Juniper SSG5

  - by Sam

  I have a Juniper SSG 5 firewall in a datacenter. The first interface (eth0/0) has been assigned a static IP address and has three other addresses configured for VIP Nat. I have a static route configured at the lowest priority for 0.0.0.0/0 to my hosting company's gateway. Now I need to configure a second IP block. I have the IPs assigned to the second interface (eth0/1) which is in the same security zone and virtual router as the first. However, with this interface enabled I (a) can't initiate outbound sessions (browse the internet, ping, DNS lookup, etc) even though I can access servers behind the firewall just fine from the outside and (b) can't ping the management IP of the firewall/gateway. I've tried anything I can think of but I guess this is a little above my head. Could anyone point me in the right direction? Interfaces: ethernet0/0 xxx.xxx.242.4/29 Untrust Layer3 ethernet0/1 xxx.xxx.152.0/28 Untrust Layer3 Routes: http://i.stack.imgur.com/60s41.png

  Read the article

• How to automount SMB shared network drives in Mac OS X Lion

  - by cyppher

  In Mac OS X 10.7 (Lion) Apple has replaced good old SMB support. Now I can't auto connect to my shared (SMB) network drives. Workarounds? Or Impossible? In OS X Snow Leopard, I could automatically connect my Ubuntu (SMB) shared network drives with auto_smb / auto_master (autofs configuration in /private/etc/). I made three mount points (folders) directly in '/Volumes', I used /Volumes/Data and /Volumes/webroot (both SMB shared). Unfortunately Lion doesn't connect (automount) my network drives. I have to manually connect to the server (Ubuntu file server) in Finder, then open up Terminal to navigate to the mount points, and then it connects. This is not a workable solution. I've searched (Google/SO) but found no solutions apart from an unsupported hack. Isn't it possible any more to automatically connect to an SMB-shared drive during startup?

  Read the article

• How to setup a django site with Cherokee, DynDNS and virtual_env?

  - by e-satis

  I have a django project running with the dev server, and would like to try run it in a production environment. I wanted to try Cherokee for a change, so I installed it. We don't have a domain name yet, so I set up a DynDNS looking like stuff.gotdns.org. It works fine, I can see the Cherokee welcome page (so red, I first believed I got an error :-p). I ran the wizard to create a new virtual server for Django. No everything is setup, but I have nothing. Still the default Cherokee welcome page. What should I do now if I want to go to "http://stuff.gotdns.org" and see my website? What should I do now if I next want to make it available only at "http://project.stuff.gotdns.org"? Important fact, I use virtual_env, so your can call Python directly, you have to activate it first.

  Read the article

• Slowdown after repeated hibernation in XP SP3

  - by John

  I have a Dell laptop w/dual core and 4 gigs of memory. Recently my machine has started to go off in never never land for 5 to 20 minutes at a time with a lot of hard drive churning. Eventually it comes back and everything operates properly. If I manage to have task manager up CPU usage shows no more then 3 to 5% during this process. I am on a corporate network and have very good virus protection in place. The problem seems to have increased in frequency since I let an update happen to IE8 and/or I started using hibernate more frequently. Any ideas or suggestions? TIA J

  Read the article

• Make cloudera-vm work on Oracle VM VirtualBox

  - by ????? ????????

  I downloaded this and the instructions say: Important: You must enable the I/O APIC in order to use 64-bit mode. (See http://www.virtualbox.org/manual/ch03.html.) On newer versions of VirtualBox, it may default to using SATA as the disk interface. This can cause a kernel panic in the VM. Switching to the IDE driver solves this problem. I am running this on Red Hat 64-bit mode (I've also tried on Ubuntu 64-bit with the same result). I pointed to the cloudera-vm image as a startup disk for the VM. I am getting this message: Failed to open a session for the virtual machine ClouderaDevelopment. VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} Does anyone know what I am doing wrong?

  Read the article

• HP Pavillion dm3 (Windows 7) BSOD,

  - by Lee

  HI I have a HP Pavilion dm3. It came up with a BSOD and then didn't give me an option to start up in safe mode. I dont have any cd drive, nor did it come with a Windows cd anyway. I presume that it has a partition in my laptop for that kinda stuff. I was hoping to boot it using a usb but I don't know how to do it or where to download the stuff from. I have access to network computers, so am able to download from the internet but it's not a Windows7 computer. I am able to download from the computers that I have access to, but unable to run any executable files on them. Can someone please help? Thanks in advance

  Read the article

• Cloud Computing - Multiple Physical Computers, One Logical Computer

  - by Koobz

  I know that you can set up multiple virtual machines per physical computer. I'm wondering if it's possible to make multiple physical computers behave as one logical unit? Fundamentally the way I imagine it working is that you can throw 10 computers into a facility one day. You've got one client that requires the equivalent of two computers worth, and 100 others that eat up the remaining 8. As demands change you're just reallocating logical resources, maybe the 2 computer client now requires a third physical system. You just add it to the cloud, and don't worry about sharding the database, or migrating data over to a new server. Can it work this way? If yes, why would anyone ever do things like partition their database servers anymore? Just add more computing resources. You scale horizontally with the hardware, but your server appears to scale vertically. There's no need to modify your application's infrastructure to support multiple databases etc.

  Read the article

• Cloud Computing - Multiple Physical Computers, One Logical Computer

  - by bundini

  I know that you can set up multiple virtual machines per physical computer. I'm wondering if it's possible to make multiple physical computers behave as one logical unit? Fundamentally the way I imagine it working is that you can throw 10 computers into a facility one day. You've got one client that requires the equivalent of two computers worth, and 100 others that eat up the remaining 8. As demands change you're just reallocating logical resources, maybe the 2 computer client now requires a third physical system. You just add it to the cloud, and don't worry about sharding the database, or migrating data over to a new server. Can it work this way? If yes, why would anyone ever do things like hand partition their database servers anymore? Just add more computing resources. You scale horizontally with the hardware, but your server appears to scale vertically. There's no need to modify your application's supporting infrastructure to support multiple databases etc.

  Read the article

• Will disk cloning resolve bad stripes on RAID?

  - by user13323

  Hi. We have a logical RAID1 drive in bad stripes state, which kept that status even after replacement and rebuilding of both drives, and gives errors in Windows logs about failure of writing to disk. IBM support suggests erasing and re-creating the RAID, then re-installing the Windows. The resulting down-time unacceptible for us, so we want to clone the RAID (via Acronis True Image), erase and re-create the RAID, then dump the cloned data back. Following IBM logic where RAID erasing and re-creation resets the whole RAID meta-data, this should clear the bad-stripes status, and start from a blank page. Question is if such strategy is possible, and will produce the desired effect? Any idea is appreciated - thanks in advance!

  Read the article

• Slight network lag on Small Business Server 2008 R2

  - by Sir.Nathan Stassen

  I recently upgraded a network from a SBS 2003 server to a SBS 2008 R2 Server. Both I and users have noticed a slight delay in network applications and browsing network drives on the new server. It is minor, maybe a second or two at most. However I am wondering if anyone knows of anyway to optimize the networking to service requests sooner to the workstations. The network is running a 1 gig network with some 100 meg devices (mainly network printers). All workstations are XP SP3 Network software runs out of a shared folder mapped as a network drive, no sql databases. Server is a Dell Poweredge T610 with plenty of ram, cpu power, and storage.

  Read the article

• Shrink Partition on Production Server

  - by Campo

  SO our production server was only setup with one large partition. I have setup a standby server and properly partitioned it. Now the boss wants the production environment's partition shrunk. It is an HP DL380 G5 We have 4 hot swap drives in a raid 5. How best should I go about doing this. Seems like a bad idea to me. Should I use windows or HP to do the partitioning? What should I be aware of in a production environment? The idea is to put the site (Inetpub) on a separate partition instead of the C: drive. How much downtime should I expect? Is this a terrible idea? Anything else I have missed?

  Read the article

• Best security practice for small networks - wifi, lan,

  - by Grimlockz

  We regularly setup small networks for clients in different locations to allow them to work on different products now the question what should be the best security practice. Currently we have a wifi enabled with WPA2 and most laptops connect to this but some will connect to a cabled switch connecting to the router. We are thinking on what we should do to increase the security on our small networks - We do have have security on the laptops so you can share directly to the other persons drive by a simple Windows user account. Some suggestions are: We get a LAN switch with ACL control and mac filtering for the hard wired connections? We get acl working on the wifi via a good Cisco router? ipSec policies on all machines? IP filtering and fixed IPs? I suppose people are worried that anyone can plug into the switches and get the access to the network . Summary: Maintain a level of decent security that can be replicated easily to every setup that we do for clients

  Read the article

• How to recover deleted files?

  - by vijay.shad

  Hi My laptop has two os. one is windows vista. and other is Ubuntu. I am currently on ubuntu system, this is my primary OS. There are 4 partitions of my hard disk Windows OS Linux(Ubuntu OS) Data Now the problem part. The data partition is NTFS. I have mounted this partition on the location /media/windrive-a under ubuntu OS. A little while back i decided to delete the mounting of the data partition and i fired command rm -r /media/windrive-a/. To give me a shock; all my data on data drive is gone. Now, I know this is not the command to remove mounted partition. But I have committed the wrong. Is there any way i can get my data back. These are very important data for me. Please suggest.

  Read the article

• How does java permgen relate to code size

  - by brad

  I've been reading a lot about java memory management, garbage collecting et al and I'm trying to find the best settings for my limited memory (1.7g on a small ec2 instance) I'm wondering if there is a direct correlation between my code size and the permgen setting. According to sun: The permanent generation is special because it holds data needed by the virtual machine to describe objects that do not have an equivalence at the Java language level. For example objects describing classes and methods are stored in the permanent generation. To me this means that it's literally storing my class def'ns etc... Does this mean there is a direct correlation between my compiled code size and the permgen I should be setting? My whole app is about 40mb and i noticed we're using 256mb permgen. I'm thinking maybe we're using memory that could be better allocated to dynamic code like object instances etc...

  Read the article

• Troubleshooting Windows Server 2012 storage spaces

  - by Iravanchi

  I'm trying the new "Storage Pools" feature on Windows Server 2012, and I've created several disks on the pool. When I restart the server, some of the disks (two, out of four) do not attach automatically, and don't show up in the list of disks. I can go to Server Manager File and Storage Services Storage Pools, and the faulty disks are listed with a yellow triangle beside them. The drive health in the properties are "unknown". But if I right-click and choose attach, the disk comes online, with all the content on it intact. But after another restart, it's the same story. I didn't find any relevant event in the event log, how can I find out why the drives are not attaching?

  Read the article

• Extracting metadata from flac header in linux

  - by Tommy Fisk

  Hello. I recently (and accidentally) wiped a hard-drive which should NOT have been formatted. Thankfully, PhotoRec was able to recover some of the most important files from the disk. Part of those files include a large music collection of flac files. I've placed these in a folder named 'FLAC' that looks like this: [Start of FLAC Folder] f11655088.flac f11698672.flac ... (around 2,000 files total) f291142600.flac [End of FLAC Folder] I'm running a livecd to rescue this data. I have access to a standard terminal in Ubuntu 10.10. I've noticed that the music player in linux will display the song title when I open any of these songs. My goal is to automatically extract the song title from these files and update their names from f12313512.flac to 'Libera - Rebirth.flac' - or whatever the song title happens to be. Thanks in advance for suggestions on how I might accomplish this!

  Read the article

• The MAPI call 'OpenMsgStore' failed: The MAPI provider failed Exchange 2003

  - by realitnzsam

  Hi guys, Recently we moved our Exchange 2003 (SP2) database from one drive to another. Now every other day or so we get errors coming up in the event log: Event Type: Error Event Source: MSExchangeSA Event Category: MAPI Session Event ID: 9175 Date: 10/03/2010 Time: 8:06:15 a.m. User: N/A Computer: SERVER Description: The MAPI call 'OpenMsgStore' failed with the following error: The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 For more information, click http://www.microsoft.com/contentredirect.asp. Restarting the Exchange Information Store fixes this instantly, but until we do it Outlook won't connect to Exchange and Blackberry emails aren't pushing out.

  Read the article

• How does bridged networking work?

  - by agz

  How does bridged networking work? I have looked through the virtualbox manuals but nothing extremely technical came up (It was just a generic gloss over of the topic) How does it assign a different ip to the virtual machine but uses the same network card? Why does this different ip (I found using ip addr under linux) not show up under the "attached devices section" of my router but I can port forward to it? How come if I connect to a password protected wifi network, it does not require me to enter my password? Is this multihoming?

  Read the article

• Windows 2008 R2 Server Core Disk Space Requirements/Recomendations

  - by Richard West

  I'm in the preparation stage to roll out a few Windows 2008 R2 Server Core in my VMware ESX environment. In looking over the documentation it looks like Server Core can operate in a little as 6.5 GB of hard drive space. Less disk space required. A Server Core installation requires only about 3.5 gigabytes (GB) of disk space to install and approximately 3 GB for operations after the installation. I am curious as to anyone’s real world experience and recommendations with regard to this requirement. Is it realistic? A little bit about our environment: Less than 25 users, and around 75 computers/servers in our current AD system. These systems will be responsible for normal AD operations and print servers for 5 printers - nothing to big here.

  Read the article

• XPP-32 over W7-64 on music production laptop

  - by quarlo

  I need to upgrade my laptop and need high performance for music production (recording and mixing). My audio interface manufacturer seems to be unable to successfully convert their drivers to 64-bit. I do not trust a virtual machine to handle real-time audio recording at low enough latency so ... I would like to install XP Pro 32-bit on a separate partition and dual boot since most of the machines that can handle this application now ship with Windows 7 64-bit flavors. I'd like to transit to 64-bit over time assuming M-Audio does eventually get a handle on 64-bit drivers, but really need to ensure that I can stay at 32-bit for now. Does anyone have any experience with this or something similar?

  Read the article

• Recover RAID 5 data after created new array instead of re-using

  - by Brigadieren

  Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

  Read the article

< Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >