Search Results

Search found 17958 results on 719 pages for 'local delivery'.

Page 556/719 | < Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >

  • Selling Federal Enterprise Architecture (EA)

    - by TedMcLaughlan
    Selling Federal Enterprise Architecture A taxonomy of subject areas, from which to develop a prioritized marketing and communications plan to evangelize EA activities within and among US Federal Government organizations and constituents. Any and all feedback is appreciated, particularly in developing and extending this discussion as a tool for use – more information and details are also available. "Selling" the discipline of Enterprise Architecture (EA) in the Federal Government (particularly in non-DoD agencies) is difficult, notwithstanding the general availability and use of the Federal Enterprise Architecture Framework (FEAF) for some time now, and the relatively mature use of the reference models in the OMB Capital Planning and Investment (CPIC) cycles. EA in the Federal Government also tends to be a very esoteric and hard to decipher conversation – early apologies to those who agree to continue reading this somewhat lengthy article. Alignment to the FEAF and OMB compliance mandates is long underway across the Federal Departments and Agencies (and visible via tools like PortfolioStat and ITDashboard.gov – but there is still a gap between the top-down compliance directives and enablement programs, and the bottom-up awareness and effective use of EA for either IT investment management or actual mission effectiveness. "EA isn't getting deep enough penetration into programs, components, sub-agencies, etc.", verified a panelist at the most recent EA Government Conference in DC. Newer guidance from OMB may be especially difficult to handle, where bottom-up input can't be accurately aligned, analyzed and reported via standardized EA discipline at the Agency level – for example in addressing the new (for FY13) Exhibit 53D "Agency IT Reductions and Reinvestments" and the information required for "Cloud Computing Alternatives Evaluation" (supporting the new Exhibit 53C, "Agency Cloud Computing Portfolio"). Therefore, EA must be "sold" directly to the communities that matter, from a coordinated, proactive messaging perspective that takes BOTH the Program-level value drivers AND the broader Agency mission and IT maturity context into consideration. Selling EA means persuading others to take additional time and possibly assign additional resources, for a mix of direct and indirect benefits – many of which aren't likely to be realized in the short-term. This means there's probably little current, allocated budget to work with; ergo the challenge of trying to sell an "unfunded mandate". Also, the concept of "Enterprise" in large Departments like Homeland Security tends to cross all kinds of organizational boundaries – as Richard Spires recently indicated by commenting that "...organizational boundaries still trump functional similarities. Most people understand what we're trying to do internally, and at a high level they get it. The problem, of course, is when you get down to them and their system and the fact that you're going to be touching them...there's always that fear factor," Spires said. It is quite clear to the Federal IT Investment community that for EA to meet its objective, understandable, relevant value must be measured and reported using a repeatable method – as described by GAO's recent report "Enterprise Architecture Value Needs To Be Measured and Reported". What's not clear is the method or guidance to sell this value. In fact, the current GAO "Framework for Assessing and Improving Enterprise Architecture Management (Version 2.0)", a.k.a. the "EAMMF", does not include words like "sell", "persuade", "market", etc., except in reference ("within Core Element 19: Organization business owner and CXO representatives are actively engaged in architecture development") to a brief section in the CIO Council's 2001 "Practical Guide to Federal Enterprise Architecture", entitled "3.3.1. Develop an EA Marketing Strategy and Communications Plan." Furthermore, Core Element 19 of the EAMMF is advised to be applied in "Stage 3: Developing Initial EA Versions". This kind of EA sales campaign truly should start much earlier in the maturity progress, i.e. in Stages 0 or 1. So, what are the understandable, relevant benefits (or value) to sell, that can find an agreeable, participatory audience, and can pave the way towards success of a longer-term, funded set of EA mechanisms that can be methodically measured and reported? Pragmatic benefits from a useful EA that can help overcome the fear of change? And how should they be sold? Following is a brief taxonomy (it's a taxonomy, to help organize SME support) of benefit-related subjects that might make the most sense, in creating the messages and organizing an initial "engagement plan" for evangelizing EA "from within". An EA "Sales Taxonomy" of sorts. We're not boiling the ocean here; the subjects that are included are ones that currently appear to be urgently relevant to the current Federal IT Investment landscape. Note that successful dialogue in these topics is directly usable as input or guidance for actually developing early-stage, "Fit-for-Purpose" (a DoDAF term) Enterprise Architecture artifacts, as prescribed by common methods found in most EA methodologies, including FEAF, TOGAF, DoDAF and our own Oracle Enterprise Architecture Framework (OEAF). The taxonomy below is organized by (1) Target Community, (2) Benefit or Value, and (3) EA Program Facet - as in: "Let's talk to (1: Community Member) about how and why (3: EA Facet) the EA program can help with (2: Benefit/Value)". Once the initial discussion targets and subjects are approved (that can be measured and reported), a "marketing and communications plan" can be created. A working example follows the Taxonomy. Enterprise Architecture Sales Taxonomy Draft, Summary Version 1. Community 1.1. Budgeted Programs or Portfolios Communities of Purpose (CoPR) 1.1.1. Program/System Owners (Senior Execs) Creating or Executing Acquisition Plans 1.1.2. Program/System Owners Facing Strategic Change 1.1.2.1. Mandated 1.1.2.2. Expected/Anticipated 1.1.3. Program Managers - Creating Employee Performance Plans 1.1.4. CO/COTRs – Creating Contractor Performance Plans, or evaluating Value Engineering Change Proposals (VECP) 1.2. Governance & Communications Communities of Practice (CoP) 1.2.1. Policy Owners 1.2.1.1. OCFO 1.2.1.1.1. Budget/Procurement Office 1.2.1.1.2. Strategic Planning 1.2.1.2. OCIO 1.2.1.2.1. IT Management 1.2.1.2.2. IT Operations 1.2.1.2.3. Information Assurance (Cyber Security) 1.2.1.2.4. IT Innovation 1.2.1.3. Information-Sharing/ Process Collaboration (i.e. policies and procedures regarding Partners, Agreements) 1.2.2. Governing IT Council/SME Peers (i.e. an "Architects Council") 1.2.2.1. Enterprise Architects (assumes others exist; also assumes EA participants aren't buried solely within the CIO shop) 1.2.2.2. Domain, Enclave, Segment Architects – i.e. the right affinity group for a "shared services" EA structure (per the EAMMF), which may be classified as Federated, Segmented, Service-Oriented, or Extended 1.2.2.3. External Oversight/Constraints 1.2.2.3.1. GAO/OIG & Legal 1.2.2.3.2. Industry Standards 1.2.2.3.3. Official public notification, response 1.2.3. Mission Constituents Participant & Analyst Community of Interest (CoI) 1.2.3.1. Mission Operators/Users 1.2.3.2. Public Constituents 1.2.3.3. Industry Advisory Groups, Stakeholders 1.2.3.4. Media 2. Benefit/Value (Note the actual benefits may not be discretely attributable to EA alone; EA is a very collaborative, cross-cutting discipline.) 2.1. Program Costs – EA enables sound decisions regarding... 2.1.1. Cost Avoidance – a TCO theme 2.1.2. Sequencing – alignment of capability delivery 2.1.3. Budget Instability – a Federal reality 2.2. Investment Capital – EA illuminates new investment resources via... 2.2.1. Value Engineering – contractor-driven cost savings on existing budgets, direct or collateral 2.2.2. Reuse – reuse of investments between programs can result in savings, chargeback models; avoiding duplication 2.2.3. License Refactoring – IT license & support models may not reflect actual or intended usage 2.3. Contextual Knowledge – EA enables informed decisions by revealing... 2.3.1. Common Operating Picture (COP) – i.e. cross-program impacts and synergy, relative to context 2.3.2. Expertise & Skill – who truly should be involved in architectural decisions, both business and IT 2.3.3. Influence – the impact of politics and relationships can be examined 2.3.4. Disruptive Technologies – new technologies may reduce costs or mitigate risk in unanticipated ways 2.3.5. What-If Scenarios – can become much more refined, current, verifiable; basis for Target Architectures 2.4. Mission Performance – EA enables beneficial decision results regarding... 2.4.1. IT Performance and Optimization – towards 100% effective, available resource utilization 2.4.2. IT Stability – towards 100%, real-time uptime 2.4.3. Agility – responding to rapid changes in mission 2.4.4. Outcomes –measures of mission success, KPIs – vs. only "Outputs" 2.4.5. Constraints – appropriate response to constraints 2.4.6. Personnel Performance – better line-of-sight through performance plans to mission outcome 2.5. Mission Risk Mitigation – EA mitigates decision risks in terms of... 2.5.1. Compliance – all the right boxes are checked 2.5.2. Dependencies –cross-agency, segment, government 2.5.3. Transparency – risks, impact and resource utilization are illuminated quickly, comprehensively 2.5.4. Threats and Vulnerabilities – current, realistic awareness and profiles 2.5.5. Consequences – realization of risk can be mapped as a series of consequences, from earlier decisions or new decisions required for current issues 2.5.5.1. Unanticipated – illuminating signals of future or non-symmetric risk; helping to "future-proof" 2.5.5.2. Anticipated – discovering the level of impact that matters 3. EA Program Facet (What parts of the EA can and should be communicated, using business or mission terms?) 3.1. Architecture Models – the visual tools to be created and used 3.1.1. Operating Architecture – the Business Operating Model/Architecture elements of the EA truly drive all other elements, plus expose communication channels 3.1.2. Use Of – how can the EA models be used, and how are they populated, from a reasonable, pragmatic yet compliant perspective? What are the core/minimal models required? What's the relationship of these models, with existing system models? 3.1.3. Scope – what level of granularity within the models, and what level of abstraction across the models, is likely to be most effective and useful? 3.2. Traceability – the maturity, status, completeness of the tools 3.2.1. Status – what in fact is the degree of maturity across the integrated EA model and other relevant governance models, and who may already be benefiting from it? 3.2.2. Visibility – how does the EA visibly and effectively prove IT investment performance goals are being reached, with positive mission outcome? 3.3. Governance – what's the interaction, participation method; how are the tools used? 3.3.1. Contributions – how is the EA program informed, accept submissions, collect data? Who are the experts? 3.3.2. Review – how is the EA validated, against what criteria?  Taxonomy Usage Example:   1. To speak with: a. ...a particular set of System Owners Facing Strategic Change, via mandate (like the "Cloud First" mandate); about... b. ...how the EA program's visible and easily accessible Infrastructure Reference Model (i.e. "IRM" or "TRM"), if updated more completely with current system data, can... c. ...help shed light on ways to mitigate risks and avoid future costs associated with NOT leveraging potentially-available shared services across the enterprise... 2. ....the following Marketing & Communications (Sales) Plan can be constructed: a. Create an easy-to-read "Consequence Model" that illustrates how adoption of a cloud capability (like elastic operational storage) can enable rapid and durable compliance with the mandate – using EA traceability. Traceability might be from the IRM to the ARM (that identifies reusable services invoking the elastic storage), and then to the PRM with performance measures (such as % utilization of purchased storage allocation) included in the OMB Exhibits; and b. Schedule a meeting with the Program Owners, timed during their Acquisition Strategy meetings in response to the mandate, to use the "Consequence Model" for advising them to organize a rapid and relevant RFI solicitation for this cloud capability (regarding alternatives for sourcing elastic operational storage); and c. Schedule a series of short "Discovery" meetings with the system architecture leads (as agreed by the Program Owners), to further populate/validate the "As-Is" models and frame the "To Be" models (via scenarios), to better inform the RFI, obtain the best feedback from the vendor community, and provide potential value for and avoid impact to all other programs and systems. --end example -- Note that communications with the intended audience should take a page out of the standard "Search Engine Optimization" (SEO) playbook, using keywords and phrases relating to "value" and "outcome" vs. "compliance" and "output". Searches in email boxes, internal and external search engines for phrases like "cost avoidance strategies", "mission performance metrics" and "innovation funding" should yield messages and content from the EA team. This targeted, informed, practical sales approach should result in additional buy-in and participation, additional EA information contribution and model validation, development of more SMEs and quick "proof points" (with real-life testing) to bolster the case for EA. The proof point here is a successful, timely procurement that satisfies not only the external mandate and external oversight review, but also meets internal EA compliance/conformance goals and therefore is more transparently useful across the community. In short, if sold effectively, the EA will perform and be recognized. EA won’t therefore be used only for compliance, but also (according to a validated, stated purpose) to directly influence decisions and outcomes. The opinions, views and analysis expressed in this document are those of the author and do not necessarily reflect the views of Oracle.

    Read the article

  • My Doors - Why Standards Matter to Business

    - by [email protected]
    By Brian Dayton on April 8, 2010 9:27 PM "Standards save money." "Standards accelerate projects." "Standards make better solutions." What do these statements mean to you? You buy technology solutions like Oracle Applications but you're a business person--trying to close the quarter, get performance reviews processed, negotiate a new sourcing contract, etc. When "standards" come up in presentations and discussions do you: - Nod your head politely - Tune out and check your smart phone - Turn to your IT counterpart and say "Bob's all over this standards thing, right Bob?" Here's why standards matter. My wife wants new external doors downstairs, ones that would get more light into the rooms. Am I OK with that? "Uhh, sure...it's a little dark in the kitchen." - 24 hours ago - wife calls to tell me that she's going to the hardware store and may look at doors - 20 hours ago - wife pulls into driveway, informs me that two doors are in the back of her station wagon, ready for me to carry - 19 hours ago - I re-discovered the fact that it's not fun to carry a solid wood door by myself - 5 hours ago - Local handyman, who was at our house anyway, tells me that the doors we bought will likely cost 2-3x the material cost in installation time and labor...the doors are standard but our doorways aren't We could have done more research. I could be more handy. Sure. But the fact is, my 1951 house wasn't built with me in mind. They built what worked and called it a day. The same holds true with a lot of business applications. They were designed and architected for one-time use with one use-case in mind. Today's business climate is different. If you're going to use your processes and technology to differentiate your business you should have at least a working knowledge of: - How standards can benefit your business - Your IT organization's philosophy around standards - Your vendor's track-record around standards...and watch for those who pay lip-service to standards but don't follow through The rallying cry in most IT organizations today is "learn more about the business, drop the acronyms." I'm not advocating that you go out and learn how to code in Java. But I do believe it will help your business and your decision-making process if you meet IT ½...even ¼ of the way there. Epilogue: The door project has been put on hold and yours truly has to return the doors to the hardware store tomorrow.

    Read the article

  • Monitoring C++ applications

    - by Scott A
    We're implementing a new centralized monitoring solution (Zenoss). Incorporating servers, networking, and Java programs is straightforward with SNMP and JMX. The question, however, is what are the best practices for monitoring and managing custom C++ applications in large, heterogenous (Solaris x86, RHEL Linux, Windows) environments? Possibilities I see are: Net SNMP Advantages single, central daemon on each server well-known standard easy integration into monitoring solutions we run Net SNMP daemons on our servers already Disadvantages: complex implementation (MIBs, Net SNMP library) new technology to introduce for the C++ developers rsyslog Advantages single, central daemon on each server well-known standard unknown integration into monitoring solutions (I know they can do alerts based on text, but how well would it work for sending telemetry like memory usage, queue depths, thread capacity, etc) simple implementation Disadvantages: possible integration issues somewhat new technology for C++ developers possible porting issues if we switch monitoring vendors probably involves coming up with an ad-hoc communication protocol (or using RFC5424 structured data; I don't know if Zenoss supports that without custom Zenpack coding) Embedded JMX (embed a JVM and use JNI) Advantages consistent management interface for both Java and C++ well-known standard easy integration into monitoring solutions somewhat simple implementation (we already do this today for other purposes) Disadvantages: complexity (JNI, thunking layer between native C++ and Java, basically writing the management code twice) possible stability problems requires a JVM in each process, using considerably more memory JMX is new technology for C++ developers each process has it's own JMX port (we run a lot of processes on each machine) Local JMX daemon, processes connect to it Advantages single, central daemon on each server consistent management interface for both Java and C++ well-known standard easy integration into monitoring solutions Disadvantages: complexity (basically writing the management code twice) need to find or write such a daemon need a protocol between the JMX daemon and the C++ process JMX is new technology for C++ developers CodeMesh JunC++ion Advantages consistent management interface for both Java and C++ well-known standard easy integration into monitoring solutions single, central daemon on each server when run in shared JVM mode somewhat simple implementation (requires code generation) Disadvantages: complexity (code generation, requires a GUI and several rounds of tweaking to produce the proxied code) possible JNI stability problems requires a JVM in each process, using considerably more memory (in embedded mode) Does not support Solaris x86 (deal breaker) Even if it did support Solaris x86, there are possible compiler compatibility issues (we use an odd combination of STLPort and Forte on Solaris each process has it's own JMX port when run in embedded mode (we run a lot of processes on each machine) possibly precludes a shared JMX server for non-C++ processes (?) Is there some reasonably standardized, simple solution I'm missing? Given no other reasonable solutions, which of these solutions is typically used for custom C++ programs? My gut feel is that Net SNMP is how people do this, but I'd like other's input and experience before I make a decision.

    Read the article

  • Unable to ping inside or outside network with default gateway 0.0.0.0

    - by agentroadkill
    I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

    Read the article

  • Professional immigration

    - by etranger
    Hello all, Does anyone here have a practical advice on professional relocation from Russia to Europe? The reasons behind making such a decision are far beyond the subject, perhaps, so I'll stick to the practical part. Having done some of the "common stuff" for finding a job, I am now facing two serious problems: I am a "dual-class" person, with university degree in marketing, and multiple years of self-studied computer competence (hence my writing here). Have professional experience in both areas. I don't currently hold a European work permit. From what I can see, this results in normal HR person throwing out my CV as either being "overqualified" or "too much trouble with making the permit". I do have the skills and character to start my own business, but it requires start-up capital that I don't have, over the last years I had to pay high bills for medical treatment of my family member, who had deceased. Now, I'm almost out of debts. As you can probably guess, English is not a problem, and I'm open to new languages, but first steps of entering the market, or the society, is the problematic part. I live close to Norway, and am trying to get some professional contacts there, but it hasn't got me any practical perspective so far. Any advice is greatly appreciated. EDIT: I am currently making my living off web site development, and occasional consulting services both in IT and marketing. For purely geographic reasons I'm dealing with clients that reside in the same city where I live, pop. 350 000. Being quite local, market requirements for web sites are simple and stable — clients need to control navigation, write articles in a word-like editor, upload illustrations and place ad banners, all with no additional programming. As many web developers do, I'm using my own content management system that fits these expectations. I have also started developing a newer version of this system that has better support for international environments, but I'm too distant from the real market demand in Europe to speak of the right track here. Technically it's based on php/mysql and uses xslt for templating. It allows for quick website deployment, and has architectural neatness, lack of which made me abandon similar opensource solutions (Joomla and the like). Deploying time from rasterized design proofs is normally under 6-8 working hours, don't know how that compares to the world practice. EDIT 2: Can anyone share what Norwegian (Scandinavian) web solutions market currently demands?

    Read the article

  • OOF checklist

    - by Daniel Moth
    When going on vacation or otherwise being out of office (known as OOF in Microsoft), it is polite and professional that our absence creates the minimum disruption possible to the rest of the business, and especially our colleagues. Below is my OOF checklist - I try to do these as soon as I know I'll be OOF, rather than leave it for the night before. Let the relevant folks on the team know the planned dates of absence and check if anybody was expecting something from you during that timeframe. Reset expectations with them, and as applicable try to find another owner for individual activities that cannot wait. Go through your calendar for the OOF period and decline every meeting occurrence so the owner of the meeting knows that you won't be attending (similar to my post about responding to invites). If it is your meeting cancel it so that people don’t turn up without the meeting organizer being there. Do this even for meetings were the folks should know due to step #1. Over-communicating is a good thing here and keeps calendars all around up to date. Enter your OOF dates in whatever tool your company uses. Typically that is the notification to your manager. In your Outlook calendar, create a local Appointment (don't invite anyone) for the date range (All day event) setting the "Show As" dropdown to "Out of Office". This way, people won’t try to schedule meetings with you on that day. If you use Lync, set the status to "Off Work" for that period. If you won't be responding to email (which when on your vacation you definitely shouldn't) then in Outlook setup "Automatic Replies (Out of Office)" for that period. This way people won’t think you are rude when not replying to their emails. In your OOF message point to an alias (ideally of many people) as a fallback for urgent queries. If you want to proactively notify individuals of your OOFage then schedule and send a multi-day meeting request for the entire period. Remember to set the "Show As" to "Free" (so their calendar doesn’t show busy/oof to others), set the "Reminder" to "None" (so they don’t get a reminder about it), set "Low Importance", and uncheck both "Response Options" so if they don't want this on their calendar, it is just one click for them to get rid of it. Aside: I have another post with advice on sending invites. If you care about people who would not observe the above but could drop by your office, stick a physical OOF note at your office door or chair/monitor or desk. Have I missed any? Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Failed to start up after upgrading software in ubuntu 10.10

    - by Landy
    I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

    Read the article

  • Small hiccup with VMware Player after upgrading to Ubuntu 12.04

    The upgrade process Finally, it was time to upgrade to a new LTS version of Ubuntu - 12.04 aka Precise Pangolin. I scheduled the weekend for this task and despite the nickname of Mauritius (Cyber Island) it took roughly 6 hours to download nearly 2.400 packages. No problem in general, as I have spare machines to work on, and it was weekend anyway. All went very smooth and only a few packages required manual attention due to local modifications in the configuration. With the new kernel 3.2.0-24 it was necessary to reboot the system and compared to the last upgrade, I got my graphical login as expected. Compilation of VMware Player 4.x fails A quick test on the installed applications, Firefox, Thunderbird, Chromium, Skype, CrossOver, etc. reveils that everything is fine in general. Firing up VMware Player displays the known kernel mod dialog that requires to compile the modules for the newly booted kernel. Usually, this isn't a big issue but this time I was confronted with the situation that vmnet didn't compile as expected ("Failed to compile module vmnet"). Luckily, this issue is already well-known, even though with "Failed to compile module vmmon" as general reason but nevertheless it was very easy and quick to find the solution to this problem. In VMware Communities there are several forum threads related to this topic and VMware provides the necessary patch file for Workstation 8.0.2 and Player 4.0.2. In case that you are still on Workstation 7.x or Player 3.x there is another patch file available. After download extract the file like so: tar -xzvf vmware802fixlinux320.tar.gz and run the patch script as super-user: sudo ./patch-modules_3.2.0.sh This will alter the existing installation and source files of VMware Player on your machine. As last step, which isn't described in many other resources, you have to restart the vmware service, or for the heart-fainted, just reboot your system: sudo service vmware restart This will load the newly created kernel modules into your userspace, and after that VMware Player will start as usual. Summary Upgrading any derivate of Ubuntu, in my case Xubuntu, is quick and easy done but it might hold some surprises from time to time. Nonetheless, it is absolutely worthy to go for it. Currently, this patch for VMware is the only obstacle I had to face so far and my system feels and looks better than before. Happy upgrade! Resources I used the following links based on Google search results: http://communities.vmware.com/message/1902218#1902218http://weltall.heliohost.org/wordpress/2012/01/26/vmware-workstation-8-0-2-player-4-0-2-fix-for-linux-kernel-3-2-and-3-3/ Update on VMware Player 4.0.3 Please continue to read on my follow-up article in case that you upgraded either VMware Workstation 8.0.3 or VMware Player 4.0.3.

    Read the article

  • Need help on a problemset in a programming contest

    - by topher
    I've attended a local programming contest on my country. The name of the contest is "ACM-ICPC Indonesia National Contest 2013". The contest has ended on 2013-10-13 15:00:00 (GMT +7) and I am still curious about one of the problems. You can find the original version of the problem here. Brief Problem Explanation: There are a set of "jobs" (tasks) that should be performed on several "servers" (computers). Each job should be executed strictly from start time Si to end time Ei Each server can only perform one task at a time. (The complicated thing goes here) It takes some time for a server to switch from one job to another. If a server finishes job Jx, then to start job Jy it will need an intermission time Tx,y after job Jx completes. This is the time required by the server to clean up job Jx and load job Jy. In other word, job Jy can be run after job Jx if and only if Ex + Tx,y = Sy. The problem is to compute the minimum number of servers needed to do all jobs. Example: For example, let there be 3 jobs S(1) = 3 and E(1) = 6 S(2) = 10 and E(2) = 15 S(3) = 16 and E(3) = 20 T(1,2) = 2, T(1,3) = 5 T(2,1) = 0, T(2,3) = 3 T(3,1) = 0, T(3,2) = 0 In this example, we need 2 servers: Server 1: J(1), J(2) Server 2: J(3) Sample Input: Short explanation: The first 3 is the number of test cases, following by number of jobs (the second 3 means that there are 3 jobs for case 1), then followed by Ei and Si, then the T matrix (sized equal with number of jobs). 3 3 3 6 10 15 16 20 0 2 5 0 0 3 0 0 0 4 8 10 4 7 12 15 1 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 8 10 4 7 12 15 1 4 0 50 50 50 50 0 50 50 50 50 0 50 50 50 50 0 Sample Output: Case #1: 2 Case #2: 1 Case #3: 4 Personal Comments: The time required can be represented as a graph matrix, so I'm supposing this as a directed acyclic graph problem. Methods I tried so far is brute force and greedy, but got Wrong Answer. (Unfortunately I don't have my code anymore) Could probably solved by dynamic programming too, but I'm not sure. I really have no clear idea on how to solve this problem. So a simple hint or insight will be very helpful to me.

    Read the article

  • Nautilus ignores / misinterprets view size

    - by BlueZero4
    I noticed that a lot of my folders had suddenly switched to higher view sizes than I had specificied. I was assuming that somehow nautilus had suddenly decided to create per-folder entries for said folders with incorrect view sizes. So I found this question: How to reset all per-folder view settings in nautilus? I found the folder specified in the answer (~/.local/share/gvfs-metadata) and found that it was actually important to delete the files INSIDE the folder, because for some reason deleting the folder itself didn't work for some reason. After doing that, I discovered that the odd setting was for the default view settings, not for a handful of files. Nautilus actually handles the per-folder settings like it should, but it ignores the global folder settings. I want Nautilus to, by default, display all non-specified folders as compact view, 50%. My folders are using the compact setting like I want, but they are not down to 50%. At a guess, they are at 100%. Altering the view size of the icon view can set the compact view to 33%, but I'm not sure by what mechanism this functions. I haven't extensively tested the other view sizes because I don't plan on using them much at all. Next I looked up questions like How do I reset nautilus to the default configuration? I'm expecting the problem to be a corrupted config file or something of the sort, so I hunted down directories like ~/.nautilus, ~/.gconf/apps/nautilus, and ~/.gnome2/nautilus. (I don't have a ~/.nautilus directory, so I'm assuming that's only for older versions.) I attempted to remove the contents of each, but I can't seem to force Nautilus back to default configuration settings. Actually viewing Nautilus's preferences in GConf made the settings look like they were what I wanted them to be, which is odd. I'd like to force Nautilus to default settings, basically. Though if something else will fix it, I'll take it too. I'm not interested in doing a full uninstall, reinstall of Nautilus if I don't have to. ==EDIT1== Turns out that Nautilus just writes the settings in GConf for the heck of it. Nautilus only really uses the settings that it stores in DConf. I did gsettings reset-recursively org.gnome.nautilus, which actually did reset Nautilus to default, but it still doesn't like my view size settings.

    Read the article

  • Travelling at Magenic

    - by Chris G. Williams
    I occasionally get asked if we travel "a lot" at Magenic. Sometimes the question comes from job candidates. Other times it's clients, recruiters or friends. To give a simple yes or no answer would be a disservice to the person asking the question. So here is my standard answer:It depends.(That was the short version.  Here's the long version...)We do have some guys that are more "national" in focus, and they can travel a fair amount. They also receive a little extra in compensation for doing so. It's a balancing act, and not necessarily a one-size-fits-all situation. Not everyone is well suited to constant travel. Some folks enjoy it and some folks hate it.With our local guys, our general policy is to TRY and keep them close to home whenever possible, but sometimes the needs of the client will dictate otherwise. (As Spock would say... the needs of the many outweigh the needs of the few, or the one.)In most cases though, we really do try to avoid sending our guys on extended travel gigs (i.e. every week for 6 months) when a simple kickoff trip and occasional visit will do. This depends on the nature of the gig, of course. Some types of work lend themselves to this model better than others. Additionally, this can and does vary by office. If one office is having trouble staffing a gig (not enough available bodies) and another office has a few too many folks on the bench, well... you can connect the dots. But again, we try to keep that to a minimum.Lastly, we all have our own thresholds for what we consider "a lot" of travel. There are two parts to this threshold:Half of it is whatever you're accustomed to already. The other half is being honest with yourself about how much you [like/hate] dealing with airports, car rentals, taxis, hotels, disruptions to your workout schedule, time away from friends/family, etc.Knowing a bit about yourself will definitely help you decide how much travel is too much for you.

    Read the article

  • why client can not receive message from server (java) [migrated]

    - by user1745931
    I have just started learning java. I modified the client side code for a server/client communication program, by creating two threads for the client side, main thread for receiving user's input, and inputThread for receiving server's response. I am sure that server has sent the response to client, however, no response message is obtain at client. Here is my code. Can anyone help me to figure it out? Thanks package clientnio; import java.net.*; import java.nio.*; import java.io.*; import java.nio.channels.*; import java.util.Scanner; public class ClientNIO { public static int bufferLen = 50; public static SocketChannel client; public static ByteBuffer writeBuffer; public static ByteBuffer readBuffer; public static void main(String[] args) { writeBuffer = ByteBuffer.allocate(bufferLen); readBuffer = ByteBuffer.allocate(bufferLen); try { SocketAddress address = new InetSocketAddress("localhost",5505); System.out.println("Local address: "+ address); client=SocketChannel.open(address); client.configureBlocking(false); //readBuffer.flip(); new inputThread(readBuffer); /* String a="asdasdasdasddffasfas"; writeBuffer.put(a.getBytes()); writeBuffer.clear(); int d=client.write(writeBuffer); writeBuffer.flip(); */ while (true) { InputStream inStream = System.in; Scanner scan = new Scanner(inStream); if (scan.hasNext()==true) { String inputLine = scan.nextLine(); writeBuffer.put(inputLine.getBytes()); //writeBuffer.clear(); System.out.println(writeBuffer.remaining()); client.write(writeBuffer); System.out.println("Sending data: "+new String(writeBuffer.array())); writeBuffer.flip(); Thread.sleep(300); } } } catch(Exception e) { System.out.println(e); } } } class inputThread extends Thread { private ByteBuffer readBuffer; public inputThread(ByteBuffer readBuffer1) { System.out.println("Receiving thread starts."); this.readBuffer = readBuffer1; start(); } @Override public void run() { try { while (true) { readBuffer.flip(); int i=ClientNIO.client.read(readBuffer); if(i>0) { byte[] b=readBuffer.array(); System.out.println("Receiving data: "+new String(b)); //client.close(); //System.out.println("Connection closed."); //break; } Thread.sleep(100); } } catch (Exception e) { System.out.println(e); } } }

    Read the article

  • sony vaio WLAN problem using 12.04

    - by Fredrik
    I'm unable to get my WLAN to work for my Sony Vaio model VPCF23C5E No problem connecting from windows, smartphones etc. $ sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | grep -i firm *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 64:27:37:92:99:0f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-29-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:f7000000-f707ffff memory:f7080000-f708ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: f0:bf:97:dd:b2:bd size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-1.fw ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:50 ioport:9000(size=256) memory:e2104000-e2104fff memory:e2100000-e2103fff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise Linux siriedit 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no [ 1.287449] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 18.273582] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS Seen some proposed solution e.g. Wireless network cannot be enabled for Sony VAIO E series but answers there don't solve my problem... I'm out of ideas :-( What else can I check? update $ ifconfig -a eth0 Link encap:Ethernet HWaddr f0:bf:97:dd:b2:bd inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f2bf:97ff:fedd:b2bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5072 errors:0 dropped:0 overruns:0 frame:0 TX packets:4444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4568435 (4.5 MB) TX bytes:610624 (610.6 KB) Interrupt:50 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1498 errors:0 dropped:0 overruns:0 frame:0 TX packets:1498 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:114156 (114.1 KB) TX bytes:114156 (114.1 KB) wlan0 Link encap:Ethernet HWaddr 64:27:37:92:99:0f inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6627:37ff:fe92:990f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1277 errors:0 dropped:0 overruns:0 frame:0 TX packets:472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:483155 (483.1 KB) TX bytes:61031 (61.0 KB)

    Read the article

  • Ubuntu 12.04 x64 LTS VPN Server not changing IP

    - by user288778
    I used this guide http://silverlinux.blogspot.co.uk/2012/05/how-to-pptp-vpn-on-ubuntu-1204-pptpd.html and it worked fine. I'm able to connect but the problem is, that my IP being changed to "localip" not "remote ip". This is what I get from tail -f /var/log/syslog [code] June 6 00:09:19 instant5860 NetworkManager[1456]: Unmanaged Device found; state CONNECTED forced (see http://bugs.launchpad.net/bugs/191889) June 6 00:09:19 instant5860 NetworkManager[1456]: Marking connection 'Wired connection 1' invalid. June 6 00:09:19 instant5860 NetworkManager[1456]: Activation (eth1) failed. June 6 00:09:19 instant5860 NetworkManager[1456]: Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) complete. June 6 00:09:19 instant5860 NetworkManager[1456]: (eth1): device state change: failed - disconnected (reason 'none') [120 30 0] June 6 00:09:19 instant5860 NetworkManager[1456]: (eth1): deactivating device (reason 'none') [0] June 6 00:09:19 instant5860 NetworkManager[1456]: Unmanaged Device found; state CONNECTED forced. June----- avahi-daemon[440]: Withdrawing address record for fe80......... on eth1 Jun------avahi-daemon[440]: Leaving mDNS multicast group on interface eth1. IPv6 with address fe80..... Jun------avahi-daemon[440]: Interface eth1.IPv6 no longer relevant for mDNS. Jun------avahi-daemon[440]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80.... Jun------avahi-daemon[440]: New relevant interface eth1.IPv6 for mDNS Jun------avahi-daemon[440]: Registering new address record for fe80..... on eth1.*. Jun - snmpd[1172]: error on subcontainer 'ia_addr' insert (-1) dbusp382]: [syste] Activating service name='org.freedesktop.PackageKit' (using servicehelper) AptDaemon: INFO: Initializing daemon AptDaemon.PackageKit: INFO: Initializing PackageKit compat layer dbus[382]: [system] Successfu;;y activated service 'org.freedesktop.PackageKit' AptDaemon.PackageKit: INFO: Initializing PackageKit transaction AptDaemon.Worker: INFO: Simulating trans: /org/debian/apt/transaction/233beca013a0473ea34d9dea805af5df AptDaemon.Worker: INFO: Processing transaction /org/debian/apt... AptDaemon.PackageKit: INFO: Get updates() AptDaemon.Worker: INFO: Finished snmpd[1172]: error on subcontainer pptpd[23611]: CTRL: Client 82.33.... control connection started pptpd[23611]: CTRL: Starting call (launching pppd, opening GRE) pptpd[23611]: pppd 2.4.5 started by root uid 0 pptpd[23611]: Using interface ppp0 pptpd[23611]: Connect ppp0 <-- /dev/pts/1 NetworkManager[1456]: SCPlugin - Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[1456]:SCPlugin - Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. pptpd[23612]: peer from calling number 82... authorized. kernel: [2918261.416923] init: ufw pre-start process (23613) terminated with status 1 dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7 CTRL: Ignored a SET LING info packet with real ACCMs! local IP address:109.0.121.197 remote IP address: 109.0.84.56 dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13 NetworkManager[1456]: (eth1): DHCPv4 request timed out. NetworkManager[1456]: (eth1): canceled DHCP transaction, DHCP client pid 23280 NetworkManager[1456]: Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[1456]: Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[1456]: (eth1): device state change: ip-config - failed (reason 'ip-config-unavailable') [70 120 5[ NetworkManager[1456]: Unmanaged 'ia_addr' insert (-1)[/code]

    Read the article

  • I didn't mean to become a database developer, but now I am. Should I stop or try to get better?

    - by pretlow majette
    20 years ago I couldn't afford even a cheap POS program when I opened my first surf shop in the Virgin Islands. I bought a copy of Paradox (remember that?) in 1990 and spent months in a back room scratching out a POS application. Over many iterations, including a switch to Access (2000)/SQL Server (2003), I built a POS and backoffice solution that runs four stores with multiple cash registers, a warehouse and office. Until recently, all my stores were connected to the same LAN (in a small shopping center) and performance wasn't an issue. Now that we've opened a location in the States that's changed. Connecting to my local server via the internet has slowed that locations application to a crawl. This is partly due to the slow and crappy dsl service we have in the Virgin Islands, and partly due to my less-than-professional code and sql. With other far-away stores in the works, I need a better solution. I like my application. My staff knows it well, and I'm not inclined to take on the expense of a proper commercial solution. So where does that leave me? I should probably host my sql online to sidestep the slow dsl here. I think I can handle cleaning up my SQL querries to speed that up a bit. What about Access? My version seems so old, but I don't like the newer versions with the 'ribbon'. There are so many options... Should I be learning Visual Studio with an eye on moving completely to the web? Will my VBA skills help me at all there? I don't have the luxury of a year at the keyboard to figure it out anymore. What about dotnetnuke, sharepoint, or lightswitch? They all seem like possibilities, but even understanding their capabilities is daunting. I'm pretty deep into it, but maybe I should bail and hire a consultant or programmer. That sounds expensive tho, and there's no guarantee there either... Any advice would be greatly appreciated. Or, if anybody is interested in buying a small chain of surf shops...

    Read the article

  • Oracle Brings Java to iOS Devices (and Android too)

    - by Shay Shmeltzer
    Java developer, did you ever wish that you can take your Java skills and apply them to building applications for iOS mobile devices? Well, now you can! With the new Oracle ADF Mobile solution, Oracle has created a unique technology that allows developers to use the Java language and develop applications that install and run on both iOS and Android mobile devices. The solution is based on a thin native container that installs as part of your application. The container is able to run the same application you develop unchanged on both Android and iOS devices. One part of the container is a headless lightweight JVM based on the Java ME CDC technology. This allows the execution of Java code on your mobile device. Java is used for building business logic, accessing local SQLite encrypted database, and invoking and interacting with remote services. Java concept on the UI too To further help transition Java developers to mobile developers, ADF Mobile borrows familiar concepts from the world of JSF to make the UI development experience simpler. The user interface layer of Oracle ADF Mobile is rendered with HTML5 which delivers native user experience on the devices, including animations and gesture support. Using a set of rich components, developers can create mobile pages without needing to write low level HTML5 and JavaScript code. The components cover everything from simple controls such as text fields, date pickers, buttons and links, to advanced data visualization components such as graphs, gauges and maps, and including unique mobile UI patterns such as lists, and toggle selectors. Want to see the components in action? Access this demo instance from your mobile device. Need to further customize the look and feel? You can use CSS3 to achieve this. A controller layer - similar in functionality to the JSF controller - allows developer to simplify the way they build navigation between pages. The logic behind the pages is written in managed beans with various scopes – again similar to the JSF approach. Need to interact with device features like camera, SMS, Contacts etc? Oracle conveniently packaged access to these services in a set of services that you can just drag and drop into your pages as buttons and links, or code into your managed beans Java calls to activate. Underneath the covers this layer is implemented using the open source phonegap solution. With the new Oracle ADF Mobile solution, transferring your Java skills into the Mobile world has become much easier. Check out this development experience demo. And then go and download JDeveloper and the ADF Mobile extension and try it out on your own. For more on ADF Mobile, see the ADF Mobile OTN page.

    Read the article

  • Access Control Service v2: Registering Web Identities in your Applications [code]

    - by Your DisplayName here!
    You can download the full solution here. The relevant parts in the sample are: Configuration I use the standard WIF configuration with passive redirect. This kicks automatically in, whenever authorization fails in the application (e.g. when the user tries to get to an area the requires authentication or needs registration). Checking and transforming incoming claims In the claims authentication manager we have to deal with two situations. Users that are authenticated but not registered, and registered (and authenticated) users. Registered users will have claims that come from the application domain, the claims of unregistered users come directly from ACS and get passed through. In both case a claim for the unique user identifier will be generated. The high level logic is as follows: public override IClaimsPrincipal Authenticate( string resourceName, IClaimsPrincipal incomingPrincipal) {     // do nothing if anonymous request     if (!incomingPrincipal.Identity.IsAuthenticated)     {         return base.Authenticate(resourceName, incomingPrincipal);     } string uniqueId = GetUniqueId(incomingPrincipal);     // check if user is registered     RegisterModel data;     if (Repository.TryGetRegisteredUser(uniqueId, out data))     {         return CreateRegisteredUserPrincipal(uniqueId, data);     }     // authenticated by ACS, but not registered     // create unique id claim     incomingPrincipal.Identities[0].Claims.Add( new Claim(Constants.ClaimTypes.Id, uniqueId));     return incomingPrincipal; } User Registration The registration page is handled by a controller with the [Authorize] attribute. That means you need to authenticate before you can register (crazy eh? ;). The controller then fetches some claims from the identity provider (if available) to pre-fill form fields. After successful registration, the user is stored in the local data store and a new session token gets issued. This effectively replaces the ACS claims with application defined claims without requiring the user to re-signin. Authorization All pages that should be only reachable by registered users check for a special application defined claim that only registered users have. You can nicely wrap that in a custom attribute in MVC: [RegisteredUsersOnly] public ActionResult Registered() {     return View(); } HTH

    Read the article

  • Multi subnet in ubuntu with dnsmasq

    - by Fox Mulder
    I have a multi lan port box that install ubuntu server 11.10. I am setup network in /etc/network/interfaces file as follow: auto lo iface lo inet loopback auto eth0 iface eth0 inet static      address 192.168.128.254      netmask 255.255.255.0      network 192.168.128.0      broadcast 192.168.128.255      gateway 192.168.128.1      dns-nameservers xxxxxx auto eth1 iface eth1 inet static      address 192.168.11.1      netmask 255.255.255.0      network 192.168.11.0      broadcast 192.168.11.255 auto eth2 iface eth2 inet static      address 192.168.21.1      netmask 255.255.255.0      network 192.168.21.0      broadcast 192.168.21.255 auto eth3 iface eth3 inet static      address 192.168.31.1      netmask 255.255.255.0      network 192.168.31.0      broadcast 192.168.31.255 I am also enable the ip forward by echo 1 /proc/sys/net/ipv4/if_forward in rc.local. my dnsmasq config as follow except-interface=eth0 dhcp-range=interface:eth1,set:wifi,192.168.11.101,192.168.11.200,255.255.255.0 dhcp-range=interface:eth2,set:kids,192.168.21.101,192.168.21.200,255.255.255.0 dhcp-range=interface:eth3,set:game,192.168.31.101,192.168.31.200,255.255.255.0 the dhcp was working fine in eth1,eth2,eth3, any machine plug in the subnet can get correct subnet's ip. My problem was, each subnet machine can't ping each other. for example. 192.168.11.101 can't ping 192.168.21.101 but can ping 192.168.128.1 192.168.31.101 can't ping 192.168.21.101 but can ping 192.168.128.1 I am also try to using route add -net 192.168.11.0 netmask 255.255.255.0 gw 192.168.11.1 (and also 192.168.21.0/192.168.31.0) at this multi-lan-port machine. But still won't work. Does anyone can help ? Thanks.

    Read the article

  • wlan0 (WPA2) doesn't work when configured manually

    - by 71GA
    I have been trying to reconfigure my eth0 and wlan0 interfaces by editing /etc/network/interfaces file as folows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.11 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 auto wlan0 iface wlan0 inet static address 192.168.1.10 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 wpa-driver wext wpa-ssid lausi wpa-ap-scan 2 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk 8952a447c860d13847ba1cabd15314ba9caf2fb207f19598f90c43fcd43c0d97 But my wireless doesnt work when i use command /etc/init.d/networking restart and when i do this i get an error: * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... RTNETLINK answers: File exists Failed to bring up eth0. ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument RTNETLINK answers: File exists Failed to bring up wlan0. Although it clearly states that my eth0 interface couldn't be brought to life it is working! But i cant say this for the wlan0 interface which doesn't even work if i unplug internet cable and again use command /etc/init.d/networking restart. This seems weird to me... When i use ìfconfig -a command i get an output which confirms that wlan0 isnt working and eth0 is. ziga@ziga-cq56:/etc/network$ ifconfig -a eth0 Link encap:Ethernet HWaddr 60:eb:69:6f:5f:69 inet addr:192.168.1.11 Bcast:192.168.1.13 Mask:255.255.255.0 inet6 addr: fe80::62eb:69ff:fe6f:5f69/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6764 errors:0 dropped:0 overruns:0 frame:0 TX packets:6641 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5932190 (5.9 MB) TX bytes:1331846 (1.3 MB) Interrupt:42 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1759 errors:0 dropped:0 overruns:0 frame:0 TX packets:1759 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:107772 (107.7 KB) TX bytes:107772 (107.7 KB) wlan0 Link encap:Ethernet HWaddr 70:f3:95:e7:57:cc inet addr:192.168.1.10 Bcast:192.168.1.12 Mask:255.255.255.0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) How can i make my wlan0 interface work? It had been working previously with network manager and wicd...

    Read the article

  • Are closures with side-effects considered "functional style"?

    - by Giorgio
    Many modern programming languages support some concept of closure, i.e. of a piece of code (a block or a function) that Can be treated as a value, and therefore stored in a variable, passed around to different parts of the code, be defined in one part of a program and invoked in a totally different part of the same program. Can capture variables from the context in which it is defined, and access them when it is later invoked (possibly in a totally different context). Here is an example of a closure written in Scala: def filterList(xs: List[Int], lowerBound: Int): List[Int] = xs.filter(x => x >= lowerBound) The function literal x => x >= lowerBound contains the free variable lowerBound, which is closed (bound) by the argument of the function filterList that has the same name. The closure is passed to the library method filter, which can invoke it repeatedly as a normal function. I have been reading a lot of questions and answers on this site and, as far as I understand, the term closure is often automatically associated with functional programming and functional programming style. The definition of function programming on wikipedia reads: In computer science, functional programming is a programming paradigm that treats computation as the evaluation of mathematical functions and avoids state and mutable data. It emphasizes the application of functions, in contrast to the imperative programming style, which emphasizes changes in state. and further on [...] in functional code, the output value of a function depends only on the arguments that are input to the function [...]. Eliminating side effects can make it much easier to understand and predict the behavior of a program, which is one of the key motivations for the development of functional programming. On the other hand, many closure constructs provided by programming languages allow a closure to capture non-local variables and change them when the closure is invoked, thus producing a side effect on the environment in which they were defined. In this case, closures implement the first idea of functional programming (functions are first-class entities that can be moved around like other values) but neglect the second idea (avoiding side-effects). Is this use of closures with side effects considered functional style or are closures considered a more general construct that can be used both for a functional and a non-functional programming style? Is there any literature on this topic? IMPORTANT NOTE I am not questioning the usefulness of side-effects or of having closures with side effects. Also, I am not interested in a discussion about the advantages / disadvantages of closures with or without side effects. I am only interested to know if using such closures is still considered functional style by the proponent of functional programming or if, on the contrary, their use is discouraged when using a functional style.

    Read the article

  • Why Java's JMF doesn't work in Linux?

    - by Visruth CV
    I got to do some image processing program in java using Linux. I chose to use the JMF for my camera (a webcam) access. But my program is not able to access the camera. But, the jmf works well in Windows. I downloaded jmf from oracle.com and I tried to install it in 'Ubuntu 10.10-the Maverick-released in October 2010 and supported until April 2012'. The downloaded file was a .bin file. I got the below output (last part of the output) when I tried the command provided by oracle /bin/sh ./jmf-2_1_1e-linux-i586.bin. For inquiries please contact: Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054. LFI# 129621/Form ID#011801 Do you agree to the above license terms? [yes or no] yes Permit recording from an applet? (see readme.html) [yes or no] yes Permit writing local files from an applet? (recommend no, see readme.html) [yes or no] yes Unpacking... tail: cannot open `+309' for reading: No such file or directory Extracting... ./install.sfx.4140: 1: cannot open ==: No such file ./install.sfx.4140: 1: ==: not found ./install.sfx.4140: 3: Syntax error: ")" unexpected chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory ./jmf-2_1_1e-linux-i586.bin: 305: JMF-2.1.1e/bin/jmfinit: not found /bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory Done. When try the same command again, getting nothing in the terminal (console). visruth@laptop:~/Desktop/mobileapps$ /bin/sh ./jmf-2_1_1e-linux-i586.bin visruth@laptop:~/Desktop/mobileapps$ Now, I'm not sure that whether it is properly installed or not.Whatever, I'm not getting camera access in my programme. I checked out the driver of the camera, it is available in the os itself I think because other softwares are able to access the camera (web cam). I tried it on both desktop and laptop, but no effect... Is there any solution for the problem?

    Read the article

  • Still prompted for a password after adding SSH public key to a server

    - by Nathan Arthur
    I'm attempting to setup a git repository on my Dreamhost web server by following the "Setup: For the Impatient" instructions here. I'm having difficulty setting up public key access to the server. After successfully creating my public key, I ran the following command: cat ~/.ssh/[MY KEY].pub | ssh [USER]@[MACHINE] "mkdir ~/.ssh; cat >> ~/.ssh/authorized_keys" ...replacing the appropriate placeholders with the correct values. Everything seemed to go through fine. The server asked for my password, and, as far as I can tell, executed the command. There is indeed a ~/.ssh/authorized_keys file on the server. The problem: When I try to SSH into the server, it still asks for my password. My understanding is that it shouldn't be asking for my password anymore. What am I missing? EDIT: SSH -v Log: Macbook:~ michaeleckert$ ssh -v [USER]@[SERVER URL] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 53: Applying options for * debug1: Connecting to [SERVER URL] [[SERVER IP]] port 22. debug1: Connection established. debug1: identity file /Users/michaeleckert/.ssh/id_rsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_rsa-cert type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa type -1 debug1: identity file /Users/michaeleckert/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.5p1 Debian-6+squeeze3 debug1: match: OpenSSH_5.5p1 Debian-6+squeeze3 pat OpenSSH_5* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA [STRING OF NUMBERS AND LETTERS SEPARATED BY SEMI-COLONS] debug1: Host ‘[SERVER URL]' is known and matches the RSA host key. debug1: Found key in /Users/michaeleckert/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/michaeleckert/.ssh/id_rsa debug1: Trying private key: /Users/michaeleckert/.ssh/id_dsa debug1: Next authentication method: password [USER]@[SERVER URL]'s password: debug1: Authentication succeeded (password). Authenticated to [SERVER URL] ([[SERVER IP]]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.UTF-8 Welcome to [SERVER URL] Any malicious and/or unauthorized activity is strictly forbidden. All activity may be logged by DreamHost Web Hosting. Last login: Sun Nov 3 12:04:21 2013 from [MY IP] [[SERVER NAME]]$

    Read the article

  • Movement prediction for non-shooters

    - by ShadowChaser
    I'm working on an isometric (2D) game with moderate-scale multiplayer - 20-30 players. I've had some difficulty getting a good movement prediction implementation in place. Right now, clients are authoritative for their own position. The server performs validation and broad-scale cheat detection, and I fully realize that the system will never be fully robust against cheating. However, the performance and implementation tradeoffs work well for me right now. Given that I'm dealing with sprite graphics, the game has 8 defined directions rather than free movement. Whenever the player changes their direction or speed (walk, run, stop), a "true" 3D velocity is set on the entity and a packet it sent to the server with the new movement state. In addition, every 250ms additional packets are transmitted with the player's current position for state updates on the server as well as for client prediction. After the server validates the packet, it gets automatically distributed to all of the other "nearby" players. Client-side, all entities with non-zero velocity (ie/ moving entities) are tracked and updated by a rudimentary "physics" system - basically nothing more than changing the position by the velocity according to the elapsed time slice (40ms or so). What I'm struggling with is how to implement clean movement prediction. I have the nagging suspicion that I've made a design mistake somewhere. I've been over the Unreal, Half-life, and all other movement prediction/lag compensation articles I could find, but they all seam geared toward shooters: "Don't send each control change, send updates every 120ms, server is authoritative, client predicts, etc". Unfortunately, that style of design won't work well for me - there's no 3D environment so each individual state change is important. 1) Most of the samples I saw tightly couple movement prediction right into the entities themselves. For example, storing the previous state along with the current state. I'd like to avoid that and keep entities with their "current state" only. Is there a better way to handle this? 2) What should happen when the player stops? I can't interpolate to the correct position, since they might need to walk backwards or another strange direction if their position is too far ahead. 3) What should happen when entities collide? If the current player collides with something, the answer is simple - just stop the player from moving. But what happens if two entities take up the same space on the server? What if the local prediction causes a remote entity to collide with the player or another entity - do I stop them as well? If the prediction had the misfortune of sticking them in front of a wall that the player has gone around, the prediction will never be able to compensate and once the error gets to high the entity will snap to the new position.

    Read the article

  • SMTP POP3 & PST. Acronyms from Hades.

    - by mikef
    A busy SysAdmin will occasionally have reason to curse SMTP. It is, certainly, one of the strangest events in the history of IT that such a deeply flawed system, designed originally purely for campus use, should have reached its current dominant position. The explanation was that it was the first open-standard email system, so SMTP/POP3 became the internet standard. We are, in consequence, dogged with a system with security weaknesses so extreme that messages are sent in plain text and you have no real assurance as to who the message came from anyway (SMTP-AUTH hasn't really caught on). Even without the security issues, the use of SMTP in an office environment provides a management nightmare to all commercial users responsible for complying with all regulations that control the conduct of business: such as tracking, retaining, and recording company documents. SMTP mail developed from various Unix-based systems designed for campus use that took the mail analogy so literally that mail messages were actually delivered to the users, using a 'store and forward' mechanism. This meant that, from the start, the end user had to store, manage and delete messages. This is a problem that has passed through all the releases of MS Outlook: It has to be able to manage mail locally in the dreaded PST file. As a stand-alone system, Outlook is flawed by its neglect of any means of automatic backup. Previous Outlook PST files actually blew up without warning when they reached the 2 Gig limit and became corrupted and inaccessible, leading to a thriving industry of 3rd party tools to clear up the mess. Microsoft Exchange is, of course, a server-based system. Emails are less likely to be lost in such a system if it is properly run. However, there is nothing to stop users from using local PSTs as well. There is the additional temptation to load emails into mobile devices, or USB keys for off-line working. The result is that the System Administrator is faced by a complex hybrid system where backups have to be taken from Servers, and PCs scattered around the network, where duplication of emails causes storage issues, and document retention policies become impossible to manage. If one adds to that the complexity of mobile phone email readers and mail synchronization, the problem is daunting. It is hardly surprising that the mood darkens when SysAdmins meet and discuss PST Hell. If you were promoted to the task of tormenting the souls of the damned in Hades, what aspects of the management of Outlook would you find most useful for your task? I'd love to hear from you. Cheers, Michael

    Read the article

  • Wifi problems after upgrading to 13.10

    - by Simon
    I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

    Read the article

< Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >