Search Results

Search found 16885 results on 676 pages for 'custom headers'.

Page 557/676 | < Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >

  • TFTP Timing Out on Ubuntu VM

    - by valsidalv
    I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

    Read the article

  • Ubuntu 12.04/12.10 can't detect windows or any other partitions(Asus z77 UEFI BIOS)

    - by user971155
    I've recently completed tinkering my new pc(motherboard ASUS z77 with UEFI BIOS) and unfortunately not everything works quite well. After installing windows 7 ultimate on a single primary partition(SATA drive) I decided to allocate one more logical partition for additional needs. When I tried doing it with the manager - it said that it couldn't allocate requested size even though I certainly asked for much less than it was available. I thought that it might have been a windows issue and proceded to installing Ubuntu 12.10 x64. When the graphical interface loaded it showed me a message stating that it can't find any other operating system on the drive. When I used custom partioning option it showed me none of my current partions(including that with windows). However, when I boot with "Try Ubuntu" feature it does find them ! I find it weird though. Here's what the console present me with: ubuntu@ubuntu:~$ sudo os-prober /dev/sda1:Windows 7 (loader):Windows:chain ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00072b98 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 100020223 49906688 7 HPFS/NTFS/exFAT /dev/sda3 100022270 1250263039 575120385 5 Extended /dev/sda4 566669312 1250263039 341796864 83 Linux I also tried creating partitions from disk utility which results in error: , Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=51211402240, size=1923000000, type=0x83 Entering MS-DOS parser (offset=0, size=640135028736) MSDOS_MAGIC found looking at part 0 (offset 1048576, size 104857600, type 0x07) new part entry looking at part 1 (offset 105906176, size 51104448512, type 0x07) new part entry looking at part 2 (offset 51211402240, size 588923274240, type 0x05) Entering MS-DOS extended parser (offset=51211402240, size=588923274240) readfrom = 51211402240 MSDOS_MAGIC found Exiting MS-DOS extended parser looking at part 3 (offset 290134687744, size 349999988736, type 0x83) new part entry Exiting MS-DOS parser MSDOS partition table detected containing partition table scheme = 1 got it Error: Can't have overlapping partitions. ped_disk_new() failed Here's what I get when I try to install the system i.stack.imgur.com/pjlb9.png, i.stack.imgur.com/g1lXN.png P.S. It's strange that I even can't create any more partitions neither with disk-utility nor with windows 7 native tools

    Read the article

  • Puppet - Is it possible to use a global var to pull in a template with the same name?

    - by Mike Purcell
    I'm new to puppet. As such I am trying to work my way around the best way to setup my manifests that make sense. Following the DRY (don't repeat yourself) principle, I am trying to load common directives in one template, then load in environment specific directives from a file matching the environment. Basically like this: # nodes.pp node base_dev { $service_env = 'dev' } node 'service1.ownij.lan' inherits base_dev { include global_env_specific } class global_env_specific { include shell::bash } # modules/shell/bash.pp class shell::bash inherits shell { notify{"Service env: ${service_env}": } file { '/etc/profile.d/custom_test.sh': content => template('_global/prefix.erb', 'shell/bash/global.erb', 'shell/bash/$service_env.erb'), mode => 644 } } But every time I run puppet agent --test puppet complains that it can't find the shell/bash/$service_env.erb file, but I double checked that it exists. I know the var is accessible due to the notify statement outputting the expected value, so I suspect I am doing which is not allowed. I know I could have a single template.erb and pass variables to the template, which would work in this case because the custom.sh file is small and not many changes across environments, but for more complex configs (httpd, solr, etc) I'd prefer to access environment specific files. I am also aware that I can specify environment specific module paths, but I'd prefer to just handle this behavior at the template level, instead of having several, closely named directories. Thanks.

    Read the article

  • How do I `SUM` by multiple columns in Excel

    - by dwwilson66
    I have a comma delimited file that includes two columns date/time (which imports as Excel's mm/dd/yyyy hh:mm custom format) and status of 1 or 0. The status represents a piece of equipment either being on or off. I'm trying to generate a graph that will show, hours up vs. down by day. CONSIDER: 1/1/2012 00:00, 1 1/1/2012 03:00, 0 1/1/2012 14:00, 1 1/3/2012 00:00, 0 This tells me that the equipment was up for three hours, down for eleven hours, and then up for thirty-four hours (across two calendar days). However, I would like to generate a graph that shows how many hours PER DAY we were up or down. CONSIDER: 1/1 XXXXXXXXXXXXX----------- (up 13, down 11) 1/2 XXXXXXXXXXXXXXXXXXXXXXXX (up 24) To me, it seems that I need to generate a dataset summing HOURS by STATUS by CALENDAR DAY...but I can't seem to find a flavor of pivot table or nested SUM(IF(SUMIF(...))) combination to make it work. Most troubling is accounting for date changes...in my example above, since my uptime starting at 14:00 on 1/1/2012 crosses midnight, I need to know that 10 uptime hours get totalled with 1/1/2012 and 24 uptime hours get totalled with 1/2/2012. I may be able to do something with a calendar list to drive the date summation, but then I need a way to compare 01/01/2012 to 01/01/2012 03:00 as equal. There's got to be a way along the lines of if(INTEGER-PORTIONS-OF-SERIAL-DATES-ARE-EQUAL,TOTAL-HOURS-IF-VALUE-IS_1,0) but nothing's worked so far. Any suggestions? I've been battling this most of the day, and need a fresh perspective. Thanks

    Read the article

  • Why is the Windows 8 recycle bin using more space than it is allocated?

    - by oldmankit
    I ran WinDirStat to scan the contents of my hard drive. I was surprised to see that the $RECYCLE.BIN folder on my D: drive takes 26 GB of space. I emptied the recycle bin, refreshed the folder in WinDirStat, but it still takes 26 GB of space. I reduced the Maximum size of the recycle bin for this drive to 10000 MB for the main user of this computer, and disabled the recycle bin for the other user, and refreshed the folder in WinDirStat, but it still takes 26 GB of space. I ran (in an elevated window) rd /s D:\$Recycle.bin, and refreshed the folder in WinDirStat, and finally it became empty. Why was it taking up space even after I emptied it? Why was it taking more space (26 GB) than the maximum allowed amount (10 GB)? Update: After six months of using Windows (no re-install and no changes of settings related to the Recycle Bin) I used WinDirStat to check how big D:\$RECYCLE.BIN has become. It is now 29 GB. In Recycle Bin Properties, I select drive D, and it is still a custom maximum size (10000 MB).

    Read the article

  • Server freezes while installing Redhat Enterprise Linux Server 6

    - by eisaacson
    We've tried both the first options Install or upgrade an existing system Install system with basic video driver When trying option #1, it gets to a screen that has a solid cursor about halfway down, then freezes. When trying option #2, it freezes at the point where it says: Waiting for hardware to initialize... Of course, we bought the unsupported version and haven't found anything to help us so far. Here are the specs to the server in the original post: ASUS P8Z68-M Pro LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard with UEFI BIOS RAIDMAX Reiter ATX-305WBP Black Steel / Plastic ATX Mid Tower Computer Case 450W Power Supply Intel Core i7-2600 Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 2000 BX80623I72600 16GB Ram OCZ Agility 3 SSD 120GB From some of the posts out there could the UEFI Bios or the Sandy Bridge processor be a culprit here? We just tried the DVD on a different computer and it got past that point with ease. It's a standard Dell build compared to our custom machine. Could it be having difficulty recognizing drivers? How do we get past that?

    Read the article

  • How to determine the root cause of a system lockup on Ubuntu 8.04 LTS?

    - by jdt141
    I'm currently working a project that involves setting up a PC/104 stack and running Ubuntu 8.04 LTS. We need to use the PC/104 stack because its an embedded application - and we're required to use a DeviceNet peripheral card to communicate to other devices. (DeviceNet is just a protocol on top of CAN.) Anyway, the following hardware is on the stack: Kontron MOPSPM104 with a 1GHz Intel Celeron processor ConnectTech FlashDrive/104 4GB Industrial Temp (-40 to +85 C) Woodhead (Molex) PC104DVNIO DeviceNet card A run of the mill 104 power supply The Kontron Board offers two serial ports, one VGA out, and two USB ports. The DeviceNet card is an ISA card. Because of this (per the User's Guide for the Kontron Board), I have manually set the IRQs in the BIOS to be appropriately configured, and turned off ACPI in both the BIOS and passed the appropriate flag in GRUB. I've installed Ubuntu 8.04 desktop, 32 bit. The problem that I'm having is that, from time to time, the entire 104 stack locks up. This only seems to happen in two cases, both of which we're running GNOME. We have a custom application that uses the DeviceNet card, and the system will lock up, or (more frequently) when we're running Firefox and either surfing for some information or trying to test it - typically by streaming video from a IP-camera. The reason I ask this questions is I cannot determine the root cause of this lockup. The IRQs appear to correctly configured in the BIOS and as the Kernel sees them, and nothing is logged to dmesg. If you all could help me determine the root cause of this lockup, I would greatly appreciate it. Thanks.

    Read the article

  • Windows 2008 R2 RDS - Double Login

    - by colo_joe
    Issue: Double logins when connecting to RemoteApps or Remote Desktop Environment: Gateway = 1 server 2008 R2 - Roles = Gateway, Session Broker, Connection Mgr, Session Host Configuration server Session hosts = 2 servers 2008 R2 - Roles = App Manager and Session host configuration Testing: I can get to the url http://RDS.domain.com/rdweb - I get prompted for authentication (1) Pass authentication, get list of remote apps. Click on remoteapps or remote desktop, get prompted for authentication again (2). Pass authentication, I get access to app or RDP. Done so far. On session host Signed rdp files with cert. Added the following to the custom RDP settings: Authenticaton level:i:0 = If server authentication fails, connect to the computer without warning (Connect and don’t warn me). prompt for credentials on client:i:1 = RDC will prompt for credentials when connecting to a server that does not support server authentication. enablecredsspsupport:i:1 = RDP will use CredSSP, if the operating system supports CredSSP. Edited the javascript file as found in http://support.microsoft.com/kb/977507 Added Connection ID, and added Web Access server to TS Web Access Computers group on the Session host servers, and Signed apps as found in hxxp://blogs.msdn.com/b/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx Note: This double login happens internally and externally.

    Read the article

  • EC2 instances keep becoming inaccessible via SSH, can I use elastic loadbalancer to check SSH connectivity?

    - by Rick
    This is mainly an issue for my development ec2 server as it seems that my instance keeps becoming inaccessible via SSH. It happened yesterday so I killed that one and started a new one and happened again later today. The server still works, my web application is accessible in a web browser but whenever I try to connect via SSH I get a pemrission denied (public key) error message in my terminal. I am 100% sure I am doing nothing wrong as I can create a new instance of the exact same AMI (its a personal custom AMI), change absolutely nothing, including using the same .pem key, and then am able to SSH into that new instance using the exact same command as before (just changing the IP address). I understand that ec2 can have issues but having this happen every day seems a bit odd.. I am using an m2.xlarge instance so I don't know if these tend to be unstable, in the past I have used a small instance and had it running for months with no problems which is why I find this so odd. I am looking into using loadbalancing but it seems the only "health" checks they offer is for http or tcp so I'm not sure if I can make it monitor for SSH connectivity. This is important for development as I may make 1-2 new pushes of an application a day and use SSH to do this. I have a designer that needs to have the app always accessible as he works with the front-end files to test output with the live application. Anyways, any advice / info is appreciated

    Read the article

  • VMware "boot screen" - add info like contact, phone number, etc.?

    - by TheCleaner
    I've tried searching Google and VMware's KB but maybe I'm not typing the right search criteria...only finding ways to fix problems with booting or screen issues. On the default boot screen of a host it looks similar to this picture from GIS: I'm curious if it is possible somehow to make it look like this instead (adding custom details): I know for the most part the info is "useless" since it is administered remotely, etc. But when I deploy standalone hosts to branch offices, it'd be nice for them to see this type of info on the boot screen. I may also include the VMs hosted on it (again on standalone hosts). Normal monitoring, etc. will be done remotely. This is strictly for odd times when the branch contact may say "the electricians are saying they need to turn off this circuit but I have no idea who to call in IT to tell them this box needs to be shut down" or similar. Anyone who has dealt with small branch offices can tell you that if it isn't labeled they easily forget what it is for and will simply say after the incident "I didn't know what it was or who to call." Possible?

    Read the article

  • Driver denied access to PCI card

    - by Corin
    Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

    Read the article

  • Sane patch schedule for Windows 2003 cluster

    - by sixlettervariables
    We've got a cluster of 75 Win2k3 nodes at work in a coarse grained compute cluster. The cluster is behind a mountain of firewalls and resides in its own VLAN. Jobs of all sizes and types run on the cluster and all of the executables running are custom-made. (ed: additional notes on our executables) The jobs range from 30 seconds to 7 days in duration, and may contain one executable or 2000 sub-jobs (of short duration). Obviously we are trying to avoid the situation where our IT schedules a reboot during a 7 day production job. We have scheduling software which accomodates all of the normal tasks for a coarse grained cluster and we can control which machines are active for submission, etc. If WSUS was in some way scriptable (or the client could state it's availability for shutdown) we could coordinate the two systems and help out. Currently, the patch schedule is the Sunday after Super Tuesday regardless of what is running on the cluster. We have to ask for an exemption every time we want to delay patching a machine for a long running production job. Basically, while our group is responsible for the machines we have little control over IT's patch schedule. Is patching monthly with MS's schedule sane for a production Windows cluster? Are there software hooks in WSUS where we could say, "please don't reboot just yet"?

    Read the article

  • Missing access log for virtual host on Plesk

    - by Cummander Checkov
    For some reason i don't understand, after creating a new virtual host / domain in Plesk a few months back, i cannot seem to find the access log. I noticed this when running /usr/local/psa/admin/sbin/statistics The host in question is being scanned Main HTML page is 'awstats.<hostname_masked>-http.html'. Create/Update database for config "/opt/psa/etc/awstats/awstats.<hostname_masked>.com-https.conf" by AWStats version 6.95 (build 1.943) From data in log file "-"... Phase 1 : First bypass old records, searching new record... Searching new records from beginning of log file... Jumped lines in file: 0 Parsed lines in file: 0 Found 0 dropped records, Found 0 corrupted records, Found 0 old records, Found 0 new qualified records. So basically no access logs have been parsed/found. I then went on to check if i could find the log myself. I looked in /var/www/vhosts/<hostname_masked>.com/statistics/logs but all i find is error_log Does anybody know what is wrong here and perhaps how i could fix this? Note: in the <hostname_masked>.com/conf/ folder i keep a custom vhost.conf file, which however contains only some rewrite conditions plus a directory statement that contains php_admin_flag and php_admin_value settings. None of them are related to logging though.

    Read the article

  • Poor performance on IIS7, only on Windows Server 2008, fine on Windows 7?

    - by user32005
    Hi, I'm new to IIS7 but have experience with other versions. I've been working on an application that works great in a dev environment (as always) but when I push it to a windows server 2008/IIS7 box performance takes a noticeable hit. The dev environment is Windows7/IIS7. The configuration in IIS is the same on the dev box as the server. I've tried all sorts of things to try and find a reason for this but I cant come to any conclusion. I've ruled out database problems on the live box as all data is cached after the first request. I've confirmed this to be true and made sure there is no additional database traffic. I've ruled out network issues with a combination of monitoring requests with fiddler and local debugging on the server. Whenever the code runs on the server there seems to be a performance issue. The server: Intel Core 2 Quad CPU Q6600 @ 2.40ghz with 2gb RAM. I know this is not fantastic but I was expecting it to at least perform as well as my dev environment (which is running much more on a lower spec). The CPU using peaks at under 60%, and memory usage is less than half of the available. I've enabled failed request tracing and most of the time is spent in a custom HttpModule, this module works to handle every request, I cant get any more detail as to what within the module may be causing the problem. Any ideas, I've been pulling my hair out for days now. Thanks

    Read the article

  • What is the best cloud technology to use for MongoDB/GridFS database servers

    - by Nerian
    We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. GridFS is a module for MongoDB that allows to store large files in de database. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities? Edit: Added meaning of GridFS

    Read the article

  • How to migrate Fedora DS (389 DS) to a new machine?

    - by zengr
    Hello, I am trying to migrate a Fedora DS (1.2.2) to a new server (1.2.7.5). The process has been painful to say the least. The old server (1.2.2) was also an upgrade from an old fedora DS setup, so it does not contain migrate-ds-admin.pl. I found this question, but the URL does not open. I am aware that I need to use migrate-ds-admin.pl, but I am clueless. How do I use it? I assume this works like this: 1. Copy migrate-ds-admin.pl from server which has 1.2.7 to 1.2.2 2. Run migrate-ds-admin.pl to export the schema+ldif from 1.2.2 3. Import the schema+ldif to 1.2.7 using migrate-ds-admin.pl. If the above is true, then what parameters are need for export and import? Note: ./ldif2db -n NetscapeRoot -i /root/NetscapeRoot.ldif ./ldif2db -n userRoot -i /root/userRoot.ldif The above two commands work like a charm, but since the schema (custom schema) is not migrated, I see alot of errors during import.

    Read the article

  • Smart card driven membership and door entry system

    - by Rob G
    I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

    Read the article

  • Links break in IE9 when using Wordpress plugins in non Wordpress Page

    - by mouli
    I have a site that uses SEF URLs and htaccess RewriteRules to serve up the pages. This has worked fine for several years until the arrival of IE9. Now it appears that the links are not being rewritten and the site is dead in the water. I have tried different compatabilty modes, to no avail, and I've played with the Rewrite Rules over and over, tried different doctypes and a few other browser settings. I agree that it cannot in theory be a browser specific problem if the problem is with the htaccess file but this site works in IE8, firefox and chrome. I have run the rewriterule through a validator and it looks fine. Any ideas would be appreciated as I am running out of ideas. The site is www.marlboroughsounds.co.nz a sample link is http://www.marlboroughsounds.co.nz/walking/freedom-walk-queen-charlotte-track/4dfw and the rewrite rule thats not working looks like this: RewriteRule ^walking/.*/([a-z0-9_]*)/?$ /walking.php?act_code=$1 [L] The link fails and it serves up a browser 404 page, not even the custom 404 I have for the site. Any ideas would be much appreciated as I am stumped.

    Read the article

  • Driver denied access to PCI card

    - by Corin
    Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

    Read the article

  • Exchange 2010 Transport rules stepping on each other

    - by TopHat
    I have a group of users that I have to restrict email access for and so far using Exchange Transport Rules has worked very well. The problem I am having is that Rule 0 is supposed to bcc the email to a review mailbox but otherwise not change anything and Rule 9 is supposed to block the email and throw a custom NDR to tell the user why they were blocked. Here are my results in practice however. If Rule 0 is enabled and Rule 9 is enabled then only Rule 9 functions If Rule 0 is disabled and Rule 9 is enabled then Rule 9 functions If Rule 0 is enabled and Rule 9 is disabled then Rule 0 functions This is after the Transport Service has been restarted (multiple times actually). I have other rule pairs that work correctly. None of these are overlapping rulesets however. - copy email going to address outside domain and then block - copy email coming in from outside and then block Here is the rule for copying internal emails (Rule 0): Apply rule to messages from a member of Blind carbon copy (Bcc) the message to except when the message is sent to a member of or [email protected] Here is the rule to block the same email (rule 9): Apply rule to messages from a member of send 'Email to non-supervisors or managers has been prohibited. Please contact your supervisor for more information.' to sender with 5.7.420 except when the message is sent to , [email protected], The distribution group used for membership in these rules is used for the other blocking and copying rules and works as expected. Is there something I missed in this setup? All of the copy rules are at the front of the transport rule group and all the actual copies at at the end of the queue if that makes a difference. Any thoughts as to why the email doesn't get copied when it gets blocked?

    Read the article

  • Users and Groups management on 7 Home Premium

    - by AviD
    Recently upgraded the home pc from XP pro, to Windows 7 Home Premium. I'm looking for a solution for a few things that seem to be missing from this edition... Since Local Users and Groups is blocked on Home Premium, I can't figure out how to manage groups, or even do anything even slightly advanced to users (basically, create/group/picture is it). net localgroup, net users, net etc dont seem to work - getting "system error 5". While I'm on the topic, I cant activate (what was once) "Local Security Policy"... Looking for any help, advice, or even a new direction cuz things is differ'nt on Winnows7... To clarify, I'm looking to do some of the following, which were simply back in XP-land: remote user only (i.e. no local logon) Grant special privileges for specific user grant access to e.g. C$ share for specific remote user create custom groups for users, to be able to separate privileges of say, my wife's from my kids define quite specifically what each user can do (beyond just standard users) Harden OS (hmm, i guess maybe what i'm looking for is security hardening guide for 7...?)

    Read the article

  • Having trouble keeping a 1GB RAM Centos server running

    - by Josh
    This is my first time configuring a VPS server and I'm having a few issues. We're running Wordpress on a 1GB Centos server configured per the internet (online research). No custom queries or anything crazy but closing in on 8K posts. At arbitrary intervals, the server just goes down. From the client side, it just says "Loading..." and will spin more or less indefinitely. On the server side, the shell will lock completely. We have to do a hard reboot from the control panel and then everything is fine. Watching "top" I see it hovering between 35 - 55% memory usage generally and occasional spikes up to around 80%. When I saw it go down, there were about 30 - 40 Apache processes showing which pushed memory over the edge. "error_log" tells me that maxclients was reached right before each reboot instance. I've tried tinkering with that but to no avail. I think we'll probably need to bump the server up to the next RAM level but with ~120K pageviews per month, it seems like that's a bit overkill since it was running fairly well on a shared server before. Any ideas? httpd.conf and my.cnf values to add? I'll update this with the current ones if that helps. Thanks in advance! This has been a fun and important learning experience but, overall, quite frustrating! Edit: quick top snapshot: top - 15:18:15 up 2 days, 13:04, 1 user, load average: 0.56, 0.44, 0.38 Tasks: 85 total, 2 running, 83 sleeping, 0 stopped, 0 zombie Cpu(s): 6.7%us, 3.5%sy, 0.0%ni, 89.6%id, 0.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2051088k total, 736708k used, 1314380k free, 199576k buffers Swap: 4194300k total, 0k used, 4194300k free, 287688k cached

    Read the article

  • iTunes Title Bar is Equal to the Location of the Library file?

    - by Urda
    I have never been able to get a clear answer on why the latest edition of iTunes does this. I have my entire iTunes library located in C:\itunes\ and the library data files inside C:\itunes\!library_info for backup purposes. However when version 9 of iTunes came out it went from having iTunes as the title, to !library_info. Anyway to get around this without moving my data files away? Annoying "feature" if that is what it is. Again Apple support and forums were of no help to me. Anyone have insight on this? System Info: Windows Vista x86 Ultimate, latest updates. iTunes Version 9.0.3.15 Screenshot: http://farm5.static.flickr.com/4072/4414557544_d0b25eb64c_o.jpg Flickr Page: http://www.flickr.com/photos/urda/4414557544/ UPDATE: I put a bounty on this, and would be open to hacking the registry or doing a custom config. Please help me fix my title bar!!! Update2: I would not like to move my library files out of itunes\!library_info to avoid them inter-mingling with my music library.

    Read the article

  • Which project management software for technophobes who've never worked with something like that?

    - by Ernst
    Hi, Our director has asked me to get something to manage projects. Note that so far we haven't used anything of the sort. I did not get very clear instructions yet, probably because she doesn't know exactly what we need either. My guess is, we'll only find out while using something. I've looked at some, openworkbench, ganttproject, and microsoft project. The latter has the advantage of easy importing of users from exchange, are there others that do that (even if not directly, easily)? I don't think it's a critical requirement though. We're using some other custom software where I have to add users manually anyway and we're small enough that it's maybe once a month that I have to add or remove a user. In any case, I'm not in favour of buying anything, since I'm skeptic about us actually succeeding in putting it to good use, and even if we do, we will only during usage discover what we need. We're also not a tech shop, most people vary from not very technically adept to technophobic. This means we need something very userfriendly. I prefer to stay away from online solutions, since we deal with sensitive information and I prefer to keep that in house, but I guess it would be acceptable for the trial period. An intranet site is an option though, but preferably something that is easy to set up with IIS. Xplanner plus and redmine I found too hard to set up for this experiment. Some other options I haven't yet tried to install, but which look to complex for our technophobes: Endeavour Software Project Management, Project-Open, Trac. Any suggestions? Thanks, Ernst

    Read the article

  • IPv6 Addresses causing Exchange Relay whitelists to fail

    - by makerofthings7
    Several of our new Exchange servers are failing to relay messages because it is communicating over IPv6 and not matching any receive connector I previously set up. I'm not sure how we are using IP6 since we only have a IPv4 network and we are routing across subnets. I discovered this by typing helo in from the source to the server that is confused by my IP6 address. I saw the IPv6 message and the custom message I gave this receive connector. (connectors with more permission have a different helo) 220 HUB01 client helo asdf 250 HUB01.nfp.com Hello [fe80::cd8:6087:7b1e:99d4%11] More info about my environment: I have two dedicated Exchange forests each with a distinct purpose. They have no trust and only communicate by SMTP. They both share the same DNS infrastructure via stub zones. What are my options? This is my guess, but I'm no IPv6 expert so I don't know which one is the best option Disable IPv6 Add the IPv6 address to the whitelist (isn't that IP dynamic?) Tell Exchange to use IPv4 instead Figure out why we are using IPv6 instead of IP4

    Read the article

< Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >