Search Results

Search found 30524 results on 1221 pages for 'display errors'.

Page 558/1221 | < Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >

• nvidia graphics resolution problem

  - by Deepak Adhikari

  I am currently using ubuntu 12.04 I have acer aspire timelinex 3830tg with 2GB nvidia GeForce GT540M graphics card To enable my graphics card I followed following steps. 1.) I activated nvidia_current and nvidia_current_updates from additional drivers 2.) sudo nvidia-xconfig 3.) then reboot Following these steps I got following errors 1.) my resolution is 640x480...(there is no option of 1366x768 in display...previously there was 1366x768 when nvidia-xconfig command was not entered) 2.) when I open nvidia-settings it shows me following error "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root) and restart the X server." Problem need to be solved 1.) Change resolution to 1366x768 2.) Also how to check my nvidia graphics working or not Please some one please help me to solve these issues...I am seriously in need of my graphics card... I wan't my nvidia graphics card work as my intel graphics smoothly I am not willing to use bumblebee with regards, ubuntu user

  Read the article

• Cannot boot into ubuntu 12.10

  - by sriram

  Below given are the steps which I followed to install ubuntu 12.10 with existing windows 8 in my machine. I downloaded ubuntu 12.10 into my disk and made it bootable from my usb by selecting that iso file. Then restared my mahine and in BIOS I selected boot from usb. Went into Linux os and selected install ubuntu alongside windows 8. It asked for memory allocation and I selected 550 GB for Ubuntu and 404GB for Windows. After that it completed ubuntu installation. The booted into my windows 8 and used easyBCD to add a new entry. Ubuntu grup2 Now the easyBCD shows, There are a total of 4 entries listed in the bootloader. Default: Windows 8 Timeout: 10 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Lenovo Recovery System BCD ID: {e58d0cb6-2eae-11e2-9d20-806e6f6e6963} Device: \Device\HarddiskVolume3 Bootloader Path: \EFI\Microsoft\Boot\LrsBootMgr.efi Entry #2 Name: EFI USB Device BCD ID: {e58d0cb5-2eae-11e2-9d20-806e6f6e6963} Device: Unknown Bootloader Path: Entry #3 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Entry #4 Name: Ubuntu 12.10 BCD ID: {6f173570-3bce-11e2-be74-c0143dd589c0} Drive: C:\ Bootloader Path: \NST\AutoNeoGrub0.mbr Next I restarted my system and in the boot options it shows windows 8 and ubuntu 12.10 When I click on ubuntu it displays, \NST\AutoNeoGrub0.mbr status 0xc000007b The application or operating system cold not be loaded because a required file is missing or contains errors. Can you help me resolve this... Thanks :)

  Read the article

• How to get hp printer to select correct trays on samba shared printer

  - by dgermann

  My first post here. Clean install of 12.04.1. Previously 10.04. Have been running a p2035n printer without problem. Now, no matter what paper tray I select it prints to the top "by-pass" feeder--not the lower main tray. And when I select to print to manual feed, it does not wait for me to put in paper (like it used to), but prints immediately. The printer is on a samba share and is physically plugged into a WinXP machine. Its uri is smb:///computername/p2035n. I have tried several of the offered drivers for this hp machine, and even tried generic-laser. Same result on all. Here are some other things I have tried (losing 2-3 hours of my time!): hp-check -t reports “error: User needs to be member of group 'lp' to enable print, scan & fax. ” and “warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.” needed to download HPLIP 3.12.11 followed http://hplipopensource.com/hplip-web/install/install/index.html sh hplip-3.12.11-run says that before setup logout and then on login run hp-setup hp-setup could not find the printer ran hp-check -t again, found I was not in group lp ran hp-check --fix and it fixed that problem, asks for reboot rebooted after running update manager (new kernel) and hp-check -t shows no errors this time all the tray selections end up on the bypass tray hp-setup still cannot find the printer So is there a way to make this work? Thanks! :- Doug.

  Read the article

• Canon MG6100 series USB printer receives job but doesn't physically print

  - by Old-linux-fan

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• Distinguishing the Transport Layer from the Session Layer

  In the OSI communications model, the Session layer manages the creation and removal of the association between two communicating network end points. This can also be called a connection. A connection is maintained while the network end points are communicated between each other in a conversation or session of some unknown length of time. Some connections and sessions only need to last long enough to send a message or a piece of data in one direction. In addition, some sessions may last longer, this typically occurs when one or both of the network end points are  able to terminate it the connection. The transport layer ensures that messages/data are delivered without errors, in sequence, and with no data content losses or data content duplications. It relieves the Session Layer from any concern with the transfer of data between them and their peers. Examples: Session Layer This layer acts like a manager and asks one of its employees (Transport Layer) to move a piece of data/message from one network end-point to another. Transportation Layer This layer takes the request of the Session Layer and moves the data as insturcted, it also double checks the data for any missing or corrupted information after it has been moved. If for some reason the new data does not match the old data then the Transport player will attempt to move the data gain until the data at both locations is in sync.

  Read the article

• Workaround for an Xcode/iOS SDK Issue...

  - by Joe Huang

  Hi, everyone: When you are doing ADF Mobile development, and you need to deploy the application to an iOS device, you would need to compile/deploy the app with iOS App Certificates and Provisioning Profile. This means you would need to "Deploy to Package" or "Deploy to iTunes" during deployment, and configure JDeveloper with the proper certificates/profiles. In some instances (exact combination is still not clear), deploy and signing the application to generate the ipa file may fail with similar error message at the end of the deployment log: [01:04:45 PM] Deployment failed due to one or more errors returned by '/usr/bin/xcrun'. The following is a summary of the returned error(s): Command-line execution failed (Return code: 1) error: /usr/bin/codesign --force --preserve-metadata=identifier,entitlements,resource-rules --sign iPhone Distribution: Oracle Corporation --resource-rules=/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app/ResourceRules.plist --entitlements /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/entitlements_plistEINPBkIG /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app failed with error 1. Output: /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature Program /usr/bin/codesign returned 1 : [/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature This issue is a known issue and is not related to ADF Mobile. The workaround is discussed in this article from StackOverflow. This article refers to the old location of Xcode, so you would need to adjust the paths accordingly. The path for Xcode 4.3 and above would be like: /Applications/Xcode.app/Contents//Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/PackageApplication to this script file. To modify it, you probably can’t use Text Editor. I end up opening a terminal session, changed the file permission, and used vi to update it. Thanks, Oracle ADF Mobile Product Management Team

  Read the article

• If statement causing xna sprites to draw frame by frame

  - by user1489599

  I’m a bit new to XNA but I wanted to write a simple program that would fire a cannon ball from a cannon at a 45 degree angle. It works fine outside of my keyboard i/o if statement, but when I encapsulate the code around an if statement checking to see if the user hits the space bar, the sprite will draw one frame at a time every time the space bar is hit. This is the code in question if (currentKeyboardState.IsKeyUp(Keys.Space) && previousKeyboardState.IsKeyDown(Keys.Space) && !skullBall.Alive) { //works outside the keyboard input if statement //{ skullBall.Position = cannon.Position; skullBall.DeltaY = -(float)(Math.Sin(MathHelper.ToRadians(45)) * 50/*39.7577*/ * time + 0.5 * (gravity * (time * time))); skullBall.DeltaX = (float)(Math.Cos(MathHelper.ToRadians(45)) * 50/*39.7577*/ * time); skullBall.Alive = true; //} } The skull ball represents the cannon ball and the cannon is just the starting point. DeltaX and DeltaY are the values I’m using to update the cannon balls position per update. I know it's dumb to have the cannon ball start at the cannons position every time the update is called but it’s not really noticeable right now. I was wondering if after examining my code, if anyone noticed any errors that would cause the sprite to display frame by frame instead of drawing it as a full animation of the cannon ball leaving the cannon and moving from there.

  Read the article

• LTS 12.04.1 will not resolve domain.local websites

  - by user108502

  I have done a brand new installation of the Ubuntu server (v12.10) with bind configured to have a dns zone of gdos.local and apache configured for said domain. With a brand new installation of Ubuntu desktop LTS I try to connect to www.gdos.local and all I get is: Server not found Firefox can't find the server at www.gdos.local. Check the address for typing errors such as ww.example.com instead of www.example.com However if I change the domain to gdos.tmp and type in www.gdos.tmp, I get the internal website. If I change it to mybusiness.local , I get the same error message. If I use a Microsoft os, this works fine, all three domains resolve to a webpage. I have searched the internet flat for the past week on dns issues but have not come up with a solution. I have followed instructions from removing dnsmasq to editing like resolv.conf (in some very strange places) and I still have no joy on getting the .local domain extension to work. I can safely say the issue is not with the server but with the desktops because if the issue was server related the Microsoft OS's would not resolve it either. I have done several installs of the desktop in an effort to make sure that I did not break anything while trying to fix this. Please can anyone point to a workable solution for fixing the .local domain extension. Thank you Mark Hollander

  Read the article

• redirect an old URL using web.config

  - by Dog

  i'm still very new to using URL rewrites and redirects and i'm having some problems on something i thought was quite simple... i've just rebuilt a website and want to redirect the old URLs to the new ones... for example : http://www.mydomain.com/about.asp?lang=1 should now be http://www.mydomain.com/content.asp?id=100230&title=about&langid=1 unfortunately, everything i've tried is giving me errors or simply does nothing. here is one rule i tried : <rule name="redirectoldabout" enabled="true" stopProcessing="true"> <match url="( .*)" negate="true" /> <conditions> <add input="{HTTP_HOST}" pattern="^mydomain\.com/about\.asp\?lang=1$" /> </conditions> <action type="Redirect" url="http://www.mydomain.com/content.asp?id=100230&title=about&langid=1" redirectType="Permanent" /> but i get an error back : HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. any suggestions as to what i'm doing wrong? thanks dog

  Read the article

• Compiling kernal problem

  - by James

  Hi, I have a hp pavilion dm3t with intel HD graphics running ubuntu 10.10 64 bit. I'm trying to compile and install a patched kernel according to this, https://launchpad.net/~kamalmostafa/+archive/linux-kamal-mjgbacklight So I downloaded the tarball from here (linked to from the page above): http://kernel.ubuntu.com/git?p=kamal/ubuntu-maverick.git;a=shortlog;h=refs/heads/mjg-backlight I untar'd it to a directory, entered the directory and did: make defconfig which was successful, so I did: make which seemed to work fine until it gave these errors: ubuntu/ndiswrapper/iw_ndis.c:1966: error: unknown field ‘num_private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1966: warning: initialization makes pointer from integer without a cast ubuntu/ndiswrapper/iw_ndis.c:1967: error: unknown field ‘num_private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: excess elements in struct initializer ubuntu/ndiswrapper/iw_ndis.c:1967: warning: (near initialization for ‘ndis_handler_def’) ubuntu/ndiswrapper/iw_ndis.c:1970: error: unknown field ‘private’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1970: warning: initialization makes integer from pointer without a cast ubuntu/ndiswrapper/iw_ndis.c:1970: error: initializer element is not computable at load time ubuntu/ndiswrapper/iw_ndis.c:1970: error: (near initialization for ‘ndis_handler_def.num_standard’) ubuntu/ndiswrapper/iw_ndis.c:1971: error: unknown field ‘private_args’ specified in initializer ubuntu/ndiswrapper/iw_ndis.c:1971: warning: initialization from incompatible pointer type make[2]: *** [ubuntu/ndiswrapper/iw_ndis.o] Error 1 make[1]: *** [ubuntu/ndiswrapper] Error 2 make: *** [ubuntu] Error 2 How can I compile and install this kernel successfully? I'm new to this and would appreciate any help.

  Read the article

• What's so bad about pointers in C++?

  - by Martin Beckett

  To continue the discussion in Why are pointers not recommended when coding with C++ Suppose you have a class that encapsulates objects which need some initialisation to be valid - like a network socket. // Blah manages some data and transmits it over a socket class socket; // forward declaration, so nice weak linkage. class blah { ... stuff TcpSocket *socket; } ~blah { // TcpSocket dtor handles disconnect delete socket; // or better, wrap it in a smart pointer } The ctor ensures that socket is marked NULL, then later in the code when I have the information to initialise the object. // initialising blah if ( !socket ) { // I know socket hasn't been created/connected // create it in a known initialised state and handle any errors // RAII is a good thing ! socket = new TcpSocket(ip,port); } // and when i actually need to use it if (socket) { // if socket exists then it must be connected and valid } This seems better than having the socket on the stack, having it created in some 'pending' state at program start and then having to continually check some isOK() or isConnected() function before every use. Additionally if TcpSocket ctor throws an exception it's a lot easier to handle at the point a Tcp connection is made rather than at program start. Obviously the socket is just an example, but I'm having a hard time thinking of when an encapsulated object with any sort of internal state shouldn't be created and initialised with new.

  Read the article

• How to make Unity 3D work with Bumblebee using the Intel chipset

  - by EboMike

  I have a Sony VAIO S laptop with the dreaded Optimus and finally managed to get Bumblebee to work fully on Ubuntu 12.04 so that I can utilize both the hardware acceleration of the Intel chipset as well as the Nvidia one via optirun and/or bumble-app-settings. However, the desktop effects don't work. But they should, I vaguely remember that they worked for a while before I had Bumblebee installed. This is what I get with the support test: :~$ /usr/lib/nux/unity_support_test -p Xlib: extension "NV-GLX" missing on display ":0". OpenGL vendor string: Tungsten Graphics, Inc OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile OpenGL version string: 1.4 (2.1 Mesa 8.0.2) Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: no GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no First of all, I kind of doubt that the chipset doesn't support VBOs (essentially a standard feature in GL). Neither Xorg.0.log nor Xorg.8.log show any particular errors. As for the Nvidia drivers: In order to get them to work, I had to install the 304.22 drivers (older ones wouldn't work). They clobbered libglx.so, so I reinstated the xserver-xorg-core libglx.so in its original place, moved Nvidia's libglx.so to an nvidia-specific folder and specified that folder in the bumblebee.config. That seems to work and shouldn't cause the problem I see here. For fun, I tried to use the Nvidia chipset for Unity, but that didn't fly either: ~$ optirun /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce GT 640M LE/PCIe/SSE2 OpenGL version string: 4.2.0 NVIDIA 304.22 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: no GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no

  Read the article

• Attempting to install netgear N300 Wireless USB Adapter on Ubuntu without a present internet connection

  - by Liz

  Hello Linux/Ubuntu world out there. I don't have internet presently on the desktop I am trying to install the USB wireless adapter on. This seems to be the problem, which if the hardware would work would theoretically fix the problem. I can NOT access the internet via anything but wireless. I am presently on my laptop searching for answers while trying to install this little device. So any advice will have to take that into account. Now I have tried so far, using WINE which does not want to work, I have tried Windows Wireless Drivers which doesn't want to work, I have tried Software Sources, Other Software and it will not acknowledge the cdrom as a repository stating errors like E:Unable to stat the mount point /cdrom/ -stat (2: No such file or directory) However I can open the CD icon on my computer and access and browse the files. The computer can read the CD. I can read the CD. I've tried just plugging it in and seeing if the computer will automatically recognize the hardware, and go from there. That does not work either. I have tested USB port to just verify that the USB port works. It does. My laptop recognizes the hardware, and would easily install the software if I prompted it to. The difference is that my laptop is Vista, and I HATE Vista. Any tips, tricks?

  Read the article

• What am I doing wrong in my config for MySql?

  - by Knight Hawk3

  When I load my my.conf with the config at the bottom Mysql fails to start and prints no errors. I am running Arch Linux (Updated) with the latest MySQL (5.5) and the latest nginx (Well latest in the repository, Not sure how to check. Only installed it today) I will give you any info you ask for. Thanks for helping! # The following options will be passed to all MySQL clients [client] #password = your_password port = 3306 socket = /var/run/mysqld/mysqld.sock # Here follows entries for some specific programs # The MySQL server [mysqld] port = 3306 socket = /var/run/mysqld/mysqld.sock skip-locking key_buffer = 16K max_allowed_packet = 1M table_cache = 4 sort_buffer_size = 64K read_buffer_size = 256K read_rnd_buffer_size = 256K net_buffer_length = 2K thread_stack = 64K # Don’t listen on a TCP/IP port at all. This can be a security enhancement, # if all processes that need to connect to mysqld run on the same host. # All interaction with mysqld must be made via Unix sockets or named pipes. # Note that using this option without enabling named pipes on Windows # (using the “enable-named-pipe” option) will render mysqld useless! # #skip-networking server-id = 1 # Uncomment the following if you want to log updates #log-bin=mysql-bin # Uncomment the following if you are NOT using BDB tables skip-bdb # Uncomment the following if you are using InnoDB tables #innodb_data_home_dir = /var/lib/mysql/ #innodb_data_file_path = ibdata1:10M:autoextend #innodb_log_group_home_dir = /var/lib/mysql/ #innodb_log_arch_dir = /var/lib/mysql/ # You can set .._buffer_pool_size up to 50 – 80 % # of RAM but beware of setting memory usage too high #innodb_buffer_pool_size = 16M #innodb_additional_mem_pool_size = 2M # Set .._log_file_size to 25 % of buffer pool size #innodb_log_file_size = 5M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 skip-innodb [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash # Remove the next comment character if you are not familiar with SQL #safe-updates [isamchk] key_buffer = 1M sort_buffer_size = 1M [myisamchk] key_buffer = 1M sort_buffer_size = 1M [mysqlhotcopy] interactive-timeout So what is my silly error?

  Read the article

• Gnome shell not starting at login, but can start from terminal (Ubuntu 12.04)

  - by Mat Leonard

  I upgraded to Ubuntu 12.04 recently and for some reason it broke Gnome 3. The shell doesn't start up at login. My .xsession-errors looks like this right after I log in: gnome-session[1689]: WARNING: Session 'gnome' runnable check failed: Timed out (gnome-settings-daemon:1744): color-plugin-WARNING **: failed to get edid: unable to get EDID for output (gnome-settings-daemon:1744): color-plugin-WARNING **: unable to get EDID for xrandr-default: unable to get EDID for output (gnome-settings-daemon:1744): color-plugin-WARNING **: failed to reset xrandr-default gamma tables: gamma size is zero ** Message: applet now removed from the notification area ** Message: using fallback from indicator to GtkStatusIcon ** Message: moving back from GtkStatusIcon to indicator Then I can run gnome-shell --replace, the shell starts up and everything works. This is what I get immediately after: Window manager warning: Log level 16: Unable to register authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject Window manager warning: Log level 16: Error registering polkit authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject (polkit-error-quark 0) (gnome-shell:2442): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'. Individuals will not be linked properly and creating new links between Personas will not work. The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution Also, if I run /usr/lib/nux/unity_support_test -p, everything comes back as Yes and this checks out: OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce 8300 GS/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 It isn't a huge problem since I can get gnome shell to work, but it is a little annoying. So, I'd like to fix this. Thanks for your help.

  Read the article

• Cannot mount USB drive -- FSTAB error

  - by user107646

  Recently, one of my desktops seems to have developed a problem with the fstab and mounting USB drives. The specific error I receive is... Unable to mount TRAVELDRIVE Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at http://tuxera.com/community/ntfs-3g-faq/#unprivileged The contents of my fstab are... /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sdc1 : UUID=7e3431cd-522f-4e35-b286-4300fa702d4a / ext4 errors=remount-ro 0 1 #Entry for /dev/sda1 : UUID=60684D08684CDE82 /media/Archive ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdc5 : UUID=cd166221-4b1d-40f7-b9de-785208990587 none swap sw 0 0 /dev/sdd1 /media/sdd1 ntfs nls=iso8859-1,ro,users,umask=000,user 0 0 /dev/sdd5 /media/PS3 (fat32) vfat users,user 0 0 /dev/sdd5 /media/sdd5 vfat uid=m3talhead,users,user 0 0 I'm guessing its a problem with the duplicate /dev/sdd5 entries (?), but being the *nix noob I am, I'm not certain. What am I missing? Any assist is greatly appreciated!

  Read the article

• What is the best way to track / record the current programming project you work on? [duplicate]

  - by user2424160

  This question already has an answer here: Methodology for Documenting Existing Code Base 6 answers When do you start documenting the code? 13 answers Where should a programmer explain the extended logic behind the code? 5 answers I have been in this problem for long time and I want to know how it's done in real / big companies project? Suppose I have the project to build a website. Now I divide the project into sub tasks and do it. But you know that suppose I have task1 in hand like export the page to pdf. Now I spend 3 days to do that , came across various problems, many Stack Overflow questions and in the end I solve it. Now 4 months after someone told me that there is some error in the code. Now by that I completely forgot about (60%) of how I did it and why I do this way. I document the code but I can't write the whole story of that in the code. Then I have to spend much time on code to find what was the problem so that I added this line etc. I want to know that is there any way that i can log steps in completing the project. So that I can see how I end up with code, what errors I got, what questions I asked on SO and etc. How people do it in real time? Which software to use? I know in our project management software called JIRA we have tasks but that does not cover what steps I took to solve that tasks. What is the best way so that when I look back at my 2 year old project, I know how I solve particular task?

  Read the article

• How do I target a specific driver for libata kernel parameter modding?

  - by DanielSmedegaardBuus

  Sorry for the cryptic title. Not sure how to phrase it. This is it in a nutshell: I'm running a 22-disk setup, 19 of those in a ZFS array, 15 of those backed by three port multipliers attached to SATA controllers driven by the sata_sil24 module. When running full speed (SATA2, i.e. 3 Gbps), the operation is pretty quirky (simple read errors will throw an entire PMP into spasms for a long time, sometimes with pretty awful results). Booting with kernel parameter libata.force=1.5G to force SATA controllers into "legacy" speeds completely fixes all issues with the PMPs. Thing is, my ZFS pool is backed by a fast cache SSD on my ICH10R controller. Another SSD on this same controller holds the system. Doing libata.force=1.5G immediately shaves about 100 MB/s off the transfer rate of my SSDs. For the root drive, that's not such a big deal, but for the ZFS cache SSD, it is. It effectively makes the entire zpool slower for sustained transfers than it would've been without the cache drive. Random access and fs tree lookups, of course still benifit. I'm hoping, though, that there's some way to pass the .force=1.5G parameter on to just the three SATA controllers being backed by the sata_sil24 module. But listing the module options for this, no such option exists. Is this possible? And if so, how? Thanks :)

  Read the article

• Dealing with institutionalized programmers.

  - by Singleton

  Some times programmers who work in a project for long time tend to get institutionalized. It is difficult to convince them with reasoning. Even if we manage to convince them they will be adamant to take suggestion on board. How do we handle the situation without developing friction in team? Institutionalized in terms of practices. I recently joined in a project where build &release process was made so complicated with unnecessary roadblocks. My suggestion was we can get rid of some of the development overheads(like filling few spreadsheets) just by integrating defect management and version controlling tools (both are IBM-Rational tools integration can be very easy and one-off effort). Also by using tools like Maven & Ant (project involves java and some COTS products) build & release can be simplified and reduce manual errors& intervention. I managed to convince and ready to put efforts for developing proof of concept. But the ‘Senior’ developer is not willing to take it on board. One reason could be the current process makes him valuable in team.

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• PHP not working with hosting

  - by Richard

  I have been playing with a php CMS site for someone that I am ready to deploy but am running into a couple problems that I assume to be hosting related. I have been developing and playing with it localy and deploying to a hosting environment friendly towards this specific CMS (joomla). I have recently been trying to deploy to a client's hosting and have been running in to some trouble. Any help would be greatly appreciated. I have been in contact with the clients hosting and have had them set up a mysql DB for me and enable php. Simple php was working but joomla was not able to create the config files it needed to run on this hosting. Therefore I havnt been able to successfully deploy my work. While playing around with some simple php pages I have started getting http 500 errors and now cant seem to get anywhere. This is a smaller hosting company that seems willing to work with me but I dont really know what i need to ask from them to get me working. My questions to you webmaster geniuses would be as follows: Given the situation I have described, is there anything specifically i should do to get my joomla/php site running on this hosting? What specifically should I ask my current hosting providers to do to help me get working? Thanks

  Read the article

• create a .deb Package from scripts or binaries

  - by tdeutsch

  I searched for a simple way to create .deb Packages for things which have no source code to compile (configs, shellscripts, proprietary software). This was quite a problem because most of the package tutorials are assuming you have a source tarball you want to compile. Then I've found this short tutorial (german). Afterwards, I created a small script to create a simple repository. Like this: rm /export/my-repository/repository/* cd /home/tdeutsch/deb-pkg for i in $(ls | grep my); do dpkg -b ./$i /export/my-repository/repository/$i.deb; done cd /export/avanon-repository/repository gpg --armor --export "My Package Signing Key" > PublicKey apt-ftparchive packages ./ | gzip > Packages.gz apt-ftparchive packages ./ > Packages apt-ftparchive release ./ > /tmp/Release.tmp; mv /tmp/Release.tmp Release gpg --output Release.gpg -ba Release I added the key to the apt keyring and included the source like this: deb http://my.default.com/my-repository/ ./ It looks like the repo itself is working well (I ran into some problems, to fix them I needed to add the Packages twice and make the temp-file workaround for the Release file). I also put some downloaded .deb into the repo, it looks like they are also working without problems. But my self created packages didn't... Wenn i do sudo apt-get update, they are causing errors like this: E: Problem parsing dependency Depends E: Error occurred while processing my-printerconf (NewVersion2) E: Problem with MergeList /var/lib/apt/lists/my.default.com_my-repository_._Packages E: The package lists or status file could not be parsed or opened. Has anyone an idea what I did wrong?

  Read the article

• apt-get failed install of libg15, all package management is failing

  - by Stifle

  I was trying to get my Logitech G510 keyboard's back-lights working so I went into the Synaptic Package Manager and marked LibG15, G15daemon, and all the other associated packages. Synaptic reported a failed install. Now all Package management is failing due to libg15 being "halfway installed." Some commands I have tried to fix the problem follow. . . root@bt:~# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done E: The package libg15 needs to be reinstalled, but I can't find an archive for it. root@bt:~# sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done E: The package libg15 needs to be reinstalled, but I can't find an archive for it. root@bt:~# sudo apt-get -f purge libg15 Reading package lists... Done Building dependency tree Reading state information... Done E: The package libg15 needs to be reinstalled, but I can't find an archive for it. root@bt:~# sudo dpkg --configure -a dpkg: dependency problems prevent configuration of g15macro: g15macro depends on g15daemon; however: Package g15daemon is not configured yet. dpkg: error processing g15macro (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of g15stats: g15stats depends on g15daemon; however: Package g15daemon is not configured yet. dpkg: error processing g15stats (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: g15macro g15stats I'm not too computer savvy. Any help would be much appreciated!!! Note: I'm using Ubuntu 10.04 under Backtrack 5 R3.

  Read the article

• How can I call a URL as a cron job in Webmin?

  - by EmmyS

  (Possibly this belongs on stackoverflow, although it's not really a programming issue since the code works when run directly. If it needs to be moved, though, no problem.) I have a PHP file (which consumers a National Weather Service web service via SOAP, if it matters) that I need to run on a scheduled basis. I'm trying to set up a cron job in Webmin. If I use an absolute path to the file in the Command field, when I run it I get some strange errors: /var/www/html/mysite.com/test/ndfdXMLclient.php: line 1: ?php: No such file or directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 2: //: is a directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 3: //DOCUMENTATION: No such file or directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 4: //: is a directory /var/www/html/mysite.com/test/ndfdXMLclient.php: line 5: syntax error near unexpected token `"running client code",' /var/www/html/mysite.com/test/ndfdXMLclient.php: line 5: `error_log("running client code", 1, "[email protected]");' The actual code in my file for those 5 lines looks like this: <?php // *************************************************************************** //DOCUMENTATION FROM WEATHER.GOV ALL STORED IN xmlClientComments.txt // *************************************************************************** error_log("running client code", 1, "[email protected]"); The code runs perfectly fine when I run it directly in my browser, so why doesn't webmin recognize it as code? (The same thing happens if I enter the actual URL in the command field - http://mysite.com/test/ndfdXMLclient.php.) I've never worked with webmin before; most of our hosts' cron control panels allow cron jobs to run PHP files like this with no issue. Is there some trick to getting webmin to read php as actual php?

  Read the article

• Introducing a (new) test method to a team

  - by Jon List

  A couple of months ago i was hired in a new job. (I'm fresh out of my Masters in software engineering) The company mainly consists of ERP consultants, but I was hired in their fairly small web department (6 developers), our main task is ERP/ecom integration (ERP-integrated web shops). The department is growing, and recently my manager asked me to start thinking about introducing tests to the team, i love a challenge, but frankly I'm a bit scared (I'm the least experience member of the team). Currently the method of testing is clicking around in the web shop and asking the customer if the products are there, if they look okay, and if orders are posted correctly to the ERP. We are getting a lot of support cases on previous projects, where a customer or a customer's customer have run into errors, which - i suppose - is why my manager wants more structured testing. Off the top of my head, I though of some (obvious?) improvements, like looking at the requirement specification, having an issue tracker, enabling team members to register their time on a "tests"-line on the budget, and to circulate tasks amongst members of the team. But as i see it we have three main challenges: general website testing. (javascript, C#, ASP.NET and CMS integration tests) (live) ERP integration testing (customers rarely want to pay for test environments). adopting a method in the team I like the responsibility, but I am afraid that I'm in a little bit over my head. I expect that my manager expects me to set up some kind of workshop for the team where I present some techniques and ideas and where we(the team) can find some solutions together. What I learned in school was mostly unit testing and program verification, not so much testing across multiple systems and applications. What I'm looking for here, is references/advice/pointers/anecdotes; anything that might help me to get smarter and to improve the current method of my team. Thanks!! (TL;DR: read the bold parts)

  Read the article

< Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >