Search Results

Search found 18035 results on 722 pages for 'location bar'.

Page 558/722 | < Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >

• big speed difference on a network link with and without VPN tunnel

  - by xirtyllo

  Scenario: We have a network link between two offices. The link is provided by a third party company through a VLAN on their network, but to us it is totally transparent -as if we had a simple ethernet cable going from one location to the other-. We have one router at each side of the link, with 3 VPN tunnels in between the two. The test: When I test the speed of the network link with the routers in place, with one laptop directly connected to the router on each side, I consistently get ~30/35Mbps. But if I take out the routers and I test the link connecting the laptops directly to the ethernet cable at each side, I consistently get ~85/88Mbps. It's quite a big performance hit, and I would tend to think that the VPN tunnels are responsible for the slow down. Is it normal that this configuration (two routers with three VPN tunnels between them) takes away so much bandwidth? More info: The encryption algorithm used for the VPN tunnels is AES128. The routers model is Zyxel USG200 and Zyxel USG1000, and their CPU, memory, and storage use is well within normal limits. The nominal bandwidth of the network link is 100Mbps. The network link in question is supplied by a third party company (the building in between our two offices). Basically it passes through their network as a VLAN, but the VLAN is completely transparent to us (e.g. no configuration required on our side, just like one single cable from end to end). Unfortunately (or maybe fortunately) I cannot directly test different routers configurations as I'm not the person in charge of it.

  Read the article

• How to stop SophosAV from scanning directories under source control

  - by user26453

  From googling it seems its well known that SophosAV as well as other AV programs have issues with how they interact and can inhibit source control utilities like TortoiseHG or TortoiseSVN. One solution is to exclude directories under source control from on-access scanning as detailed here on Sophos's support site. There is a corollary article that mentions some issues related to this, namely need to place multiple entries for exclusions based on the possibility of the location being accessed through the short vs. long name (e.g., Progra~1 vs. "Program Files"). One other twist is I am using a junction to relocate my user directory, C:\Users\Username, to a second hard drive, E:. Since I am not sure how this interacts I have included the source control directory as they are nested in both locations. As a result, I have included the two exclusions for the on-access scanning exclusions (and to be on the safe side on-demand exclusions as well, although this should only come into play when I select a parent directory of the exclusion to be scanned on-demand, but still). You'll notice I have no need to add extra exclusions for those locations based on short vs. long name distinctions. The two exclusion I have then, for both on-access and on-demand scanning exclusions are: C:\Users\Username\source-control-directory E:\source-control-directory However, this does not seem to work as TortoiseHG still lags terribly in response to any request as AV software starts scanning when the directory is accessed via TortoiseHG. I can verify without a doubt that Sophos is causing the problems: I can completely disable on-access scanning. Once this is done TortoiseHG responds very fast to all operations. I cannot leave this disabled obviously, but since the exclusion don't seem to be working, what next?

  Read the article

• Can not join additional domain controllers

  - by Hosm

  Hi all, I had a dead PDC and another not so synced domain controller for my domain. using comments here link now the so called secondary domain controller has seized domain controls and I can verify it from dsa.msc that it is a domain controller. I set up another domain controller (win2003SRV) and about to promote an AD on it as a domain controller for my domain. When I try to join the new domain controller to the domain I face DNS problem. here is some more detail DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain DOMNAME.A.B: The query was for the SRV record for _ldap._tcp.dc._msdcs.DOMNAME.A.B The following domain controllers were identified by the query: update.DOMNAME.A.B Common causes of this error include: - Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. - Domain controllers registered in DNS are not connected to the network or are not running. For information about correcting this problem, click Help. it is worth noting that update.DOMNAME.A.B is the current domain controller to which I'd like to add another controller named PDC.DOMNAME.A.B Ip address of update.DOMNAME.A.B is 192.168.200.1 and for pdc.DOMNAME.A.B is 192.168.200.100 querying DNS on both machine return correct results. Any idea?

  Read the article

• Task Scheduler not able to execute .vbs successfully

  - by Django Reinhardt

  Hi there, got this weird problem, which will hopefully have an obvious solution for some enlightened soul: We have several daily tasks we run via a .vbs script on our server (through the Task Scheduler), and for months it has been fine, but recently we've hit a problem. The .vbs script stopped successfully executing... but oddly it worked fine when ran manually! The error given in these circumstances was always "Timeout". We thought we try a little creative thinking, and run the .vbs another way: Via a .bat file. Again we hit weird issues, but with a little more debugging information, this time around. The .bat file is nothing more than... CScript "C:\location\script.vbs" > Log.txt But the Task Scheduler fails with the following error: 0x1: An incorrect function was called or an unknown function was called. The log.txt file says: CScript Error: Initialization of the Windows Script Host failed. (Not enough storage is available to process this command. ) But get this: The .bat file executes perfectly (vbs script and all) if it's executed with a double click! There's only a problem when it's run by Task Scheduler. What the hell? We're running Windows Server 2008 R2 (x64) and yes, the Task Sheduler's results are the same whether the user is logged in or not. Also, the user that can run the scripts successfully manually, is also the same user that runs the scripts in Task Scheduler. Thanks for any help for this weird problem!

  Read the article

• WSS 3.0 Backup/Restore Root Site Collection to Sub-Site of New Site Collection

  - by bfrancis

  Our intranet was originally setup to be at the root of its site collection. We are trying to change this so that our new internet site will live in the root and the intranet will be a sub-site. At this point I have created a new web application and site collection to house the internet and intranet. I used the 'stsadm -o backup' command to create a backup of our current intranet. I then ran the 'stsadm -o restore' command to restore the intranet site collection to wss/sites/intranet. This seems to have worked as I am able to access the intranet from this location. The issue I now seem to have is that images, sub-sites, etc. are all making reference as if the intranet is still the root site. So for example a link to a sub-site is pointing to wss/department/technology/default.aspx and it needs to point to wss/sites/intranet/department/technology/default.aspx. I am looking for help and/or clarification on two things: 1. Am I approaching the migration of a root site collection to a sub-site the best way? 2. How would I go about updating the link references so that they are based on the intranet now being a sub-site instead of the root site?

  Read the article

• Outlook 2007 OST File Indexing and OneNote 2007 Indexing are Broken

  - by Matt

  I'm running Outlook 2007 under Windows 7 Home Premium RTM. My OST file was previously being properly indexed but eventually searches significantly slowed down so I suspected a problem. Searching and indexing appears broken in OneNote 2007 as well as search time is now significantly longer. I brought up the Outlook 2007 Search Options dialog and noticed that my mailbox (running from an Exchange 2007 server) wasn't listed in the "Index messages in these data files:" list box. Next I ran the Windows "Find and fix problem with windows search" wizard which reported no errors. Then I brought up the Windows Indexing Options dialog which shows Outlook listed (as shown here): then clicked Advanced and Rebuilt the index. No dice - the listbox in the Outlook 2007 dialog still didn't show my mailbox. When I clicked the Modify button in the Indexing Options dialog I see the following: When I hover over the "oneindex://..." entry, the alt text indicates "This location is currently unavailable". When I delete it and rebuild the index, this entry returns. UPDATE: Comparison of the last screenshot above with a working PC shows that on the broken PC, the lower half of the dialog lists Outlook but neither Outlook or OneNote are showing in the upper half. The working PC has Outlook and OneNote in both parts of the dialog.

  Read the article

• nginx+passenger +static websites= problems

  - by Eugene K

  I've got a Rails app that nginx serves through passenger. I'd also like to serve some static content for a different domain name. But when I add another server block to my config, both websites become unavailable returning HTTP 204. What have I done wrong? What can I do to fix it? Here's the http block of my nginx.conf: https://gist.github.com/4243256 Here's what I added : server { listen 80; server_name website2; root /var/www/website2; location / { index index.html; } } It's going to be a Rails app as well at some point in the future (though I'm not really sure about that, maybe I'm going to use a different back-end solution.) Either way, I don't want anything dynamic to eat away the resources just yet. As of now, this website consists of nothing but index.html and stylesheet.css files in the root directory. What should I do? Thank you in advance. Sincerely yours, Eugene.

  Read the article

• How much network latency is "typical" for east - west coast USA?

  - by Jeff Atwood

  At the moment we're trying to decide whether to move our datacenter from the west coast (Corvallis, OR) to the east coast (NY, NY). However, I am seeing some disturbing latency numbers from my location (Berkeley, CA) to the NYC host. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: Berkeley to NYC server: 215 ms latency, 46ms transfer time, 261ms total Berkeley to Corvallis server: 114ms latency, 41ms transfer time, 155ms total some URLs if you want to try yourself: http://careers.stackoverflow.com/content/cso/img/logo.png (NY, NY) http://serverfault.com/cache/logo.png (Corvallis, OR) It makes sense that Corvallis, OR is geographically closer to Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only went up 10%, yet the latency went up ten times as much! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... http://serverfault.com/questions/63531/does-routing-distance-affect-performance-significantly http://serverfault.com/questions/61719/how-does-geography-affect-network-latency http://serverfault.com/questions/6210/latency-in-internet-connections-from-europe-to-usa ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

  Read the article

• Cacti not working for SNMP data sources

  - by lorenzo-s

  I installed packages cacti and snmpd on a Debian server. I'm able to display common graphs in Cacti (such as memory usage, load average, logged in users, etc) using the data templates listed as Unix. Now I want to replace these graphs with new ones using SNMP data sources, because I see there is also CPU usage and because it's not excluded I have to manage multiple hosts in the future. So, I installed snmpd on the machine and left the snmpd.conf as it is. In Cacti, I created three new data sources from SNMP templates for 127.0.0.1 host: ucd/net - CPU Usage - Nice ucd/net - CPU Usage - System ucd/net - CPU Usage - User Then I created a new graph from template ucd/net - CPU Usage, and select the three data sources in the Graph Item Fields section. Graph is now enabled and running, but empty. No data have been collected. Under Console - Devices my SNMP host is listed as up and running: System:Linux ip-xx-xx-xxx-xxx 3.2.0-23-virtual #36-Ubuntu SMP Tue Apr 10 22:29:03 UTC 2012 x86_64 Uptime: 929267 (0 days, 2 hours, 34 minutes) Hostname: ip-xx-xx-xxx-xxx Location: Sitting on the Dock of the Bay Contact: Me [email protected] In SNMP Options I left all as it is: SNMP Version: Version 1 SNMP Community: public SNMP Timeout: 500 ms Maximum OID's Per Get Request: 10 In Console - Utilities - Cacti Log I have multiple warning (two for each data source) every 5 minutes: 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] Host[2] DS[18] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.4.15.0' 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] Host[1] DS[9] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.11.52.0' 10/29/2012 01:40:01 PM - CMDPHP: Poller[0] Host[2] DS[19] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:40:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.4.6.0' [...] I have the feeling I'm missing something, but I cannot get it...

  Read the article

• Netscaler - Involving Response Body Replacement with GeoIP Implementation

  - by MrGoodbyte

  I have a Netscaler (10000) NS9.3: Build 52.3.cl There is a document contains a short tutorial about GeoIP database implementation at http://support.citrix.com/article/CTX130701 I have added location database by following this tutorial successfully but instead of dropping connections I need to replace a string in content body. To do that, I created a rewrite action with those parameters. * Name: ns_country_replacement_action * Type: REPLACE_ALL * Target Expression: HTTP.RES.BODY(50000) * Replacement Text: HTTP.RES.HEADER("international") * Pattern: \{\/\*COUNTRY_NAME\*\/\} To insert header called "international", I try to create another rewrite action with those parameters. I'll add this one's policy prior. * Name: ns_country_injection_action * Type: INSERT_HTTP_HEADER * Header Name: international * Header Value: CLIENT.IP.SRC.MATCHES_LOCATION("*.US.*.*.*.*").NOT When I click on create button, it says; Compound expression syntax error, [.*.*").NOT^, 50] I'm not sure but I think that two things might cause this error. The expression I use for MATCHES_LOCATION is wrong but I use same expression in the tutorial. MATCHES_LOCATION().NOT returns BOOLEAN but the field expects STRING. How can I get this work? Do I use right tools to accomplish what I need to do? Thank you. -Umut

  Read the article

• IIS6 Multiple SSL websites to a single HTTP website?

  - by docflabby

  Running a IIS6 server on Windows 2003. All the websites use ASP.NET I have a number of websites all running separate HTTP websites: www.domain1.com www.domain2.com www.domain3.com I have a separate HTTPS website www.secure.com These websites are all running on the same server. I now wish to intergrate the content of www.secure.com into each of the domains in a transparent way. Such that each website despite having its own SSL connection displays the same website. The complicatrion is www.secure.com needs to know which website the connection has come from to apply the appropriate branding. The idea behind this is to have only one website, and location, but it keeps the core website brand. https://domain1.com looks alot better from a marketing point of view (and avoids users getting confused about what our secure website is) SSL www.domain1.com/secure - displays www.secure.com (branded domain1) SSL www.domain2.com/secure - displays www.secure.com (branded domain2) SSL www.domain3.com/secure - displays www.secure.com (branded domain3) How would the best way of achieving this, i'm open to using additional software if necessery. Would a reverse proxy be sutible for this situation?

  Read the article

• Openconnect for Cisco VPN doesn't recognize private key file - asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag

  - by Alexander Skwar

  I'm trying to use my Synology DS212 NAS box also act as VPN gateway to my companies VPN. Sadly, they only use Cisco ASA and to complicate stuff even further, we've got to use personal certificates (which is of course more secure, but more complicate to get going…). So I compiled OpenConnect v4.06 from http://www.infradead.org/openconnect/. As a very basic test, I tried to build a connection by manually invoking openconnect, passing along the key and cert files, like so: /lib/ld-linux.so.3 --library-path /opt/lib \ /opt/openconnect/sbin/openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 It fails :( Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Using client certificate '/[email protected]/OU=Company VPN' 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Loading private key failed (see above errors) Loading certificate failed. Aborting. Failed to open HTTPS connection to <ip> Failed to obtain WebVPN cookie When I run the same command with the same cert/key files on a Ubuntu 12.04 box, it works: openconnect \ --certificate=$VPN_CFG/alexander.crt \ --sslkey=$VPN_CFG/alexander.key \ --cafile=$VPN_CFG/Company_VPN_CA.crt \ --user=alexander --verbose <ip>:443 Attempting to connect to <ip>:443 Using certificate file $VPN_CFG/alexander.crt Extra cert from cafile: '/CN=Company AG VPN CA/O=Company AG/L=Zurich/ST=ZH/C=CH' SSL negotiation with <ip> Server certificate verify failed: self signed certificate Certificate from VPN server "<ip>" failed verification. Reason: self signed certificate Enter 'yes' to accept, 'no' to abort; anything else to view: yes Connected to HTTPS on <ip> GET https://<ip>/ […] Well… The error on the NAS is this: 5919:error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag:tasn_dec.c:1315: Any ideas, what's causing this? On Syno, I use OpenConnect 4.06. On Ubuntu, I just compiled and installed to a custom location OpenConnect 4.06 as well. Thanks, Alexander

  Read the article

• Windows Server 2008 Create Symbolic Link, updated Security Policy still gives privilege error

  - by Matt

  Windows Server 2008, RC2. I am trying to create a symbolic/soft link using the mklink command: mklink /D LinkName TargetDir e.g. c:\temp\>mklink /D foo bar This works fine if I run the command line as Administrator. However, I need it to work for regular users as well, because ultimately I need another program (executing as a user) to be able to do this. So, I updated the Local Security Policy via secpol.msc. Under "Local Policies" "User Rights Management" "Create symbolic links", I added "Users" to the security setting. I rebooted the machine. It still didn't work. So I added "Everyone" to the policy. Rebooted. And STILL it didn't work. What on earth am I doing wrong here? I think my user is even an Administrator on this box, and running plain command line even with this updated policy in place still gives me: You do not have sufficient privilege to perform this operation.

  Read the article

• Clicking a link in IE6 doesn't load page (internal DNS entry on our intranet)

  - by Callum

  I have a very strange problem that is only affecting some versions of IE6. The problem does affect IE 6.0.2900.5512, but does not seem to affect 6.0.3790.3959 Basically I work for a company and we have an intranet. While I'm not an expert on "internal DNS pointers", what I was able to do was create a website (let's say about football), and when an employee who is sitting behind the company firewall types the word "football" in to the web address bar of their web browser, they get redirected to a particular server. I am told this is some kind "internally pointing DNS entry". So, I've set one of these up, and I have a placed a link to it on our company intranet page. However, when the link is clicked in IE6.0.2900.5512, the page goes blank. Clicking "refresh" then loads the correct page (the one specified in the link). Can anyone help me out here. I have tried changing the way URL is formed, everything from //football to http://football/ etc. The link works fine in every other browser and IE7+, but unfoturnatly, IE6 is still the most common browser in use at my organisation.

  Read the article

• Disabling CPU management

  - by Tiffany Walker

  If I add the following processor.max_cstate=0 to the kernel command line for boot up, does that disable all CPU power management and throttling? I also found: http://www.experts-exchange.com/OS/Linux/Administration/A_3492-Avoiding-CPU-speed-scaling-in-modern-Linux-distributions-Running-CPU-at-full-speed-Tips.html The link talks of Change CPU governor from 'ondemand' to 'performance' for all CPUs/cores and disabling kondemand from kernel. Server is for web hosting UPDATES: 2.6.32-379.1.1.lve1.1.7.6.el6.x86_64 #1 SMP Sat Aug 4 09:56:37 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux . # dmidecode 2.11 SMBIOS 2.6 present. 74 structures occupying 2878 bytes. Table at 0x0009F000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 1.0c Release Date: 05/27/2010 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 4096 kB Characteristics: ISA is supported PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.16 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: 0123456789 UUID: 49434D53-0200-9033-2500-33902500D52C Wake-up Type: Power Switch SKU Number: To Be Filled By O.E.M. Family: To Be Filled By O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: VM11S61561 Asset Tag: To Be Filled By O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To Be Filled By O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Supermicro Type: Sealed-case PC Lock: Not Present Version: 0123456789 Serial Number: 0123456789 Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0

  Read the article

• Problems building nodejs on MacOS Snow Leopard

  - by mrwooster

  I am having trouble building nodejs on MacOS Snow Leopard. I think it might have something to do with my PATH variable not being set correctly for the developer tools location. For some reason, the Developer tools (gcc, g++, make etc) are all stored in /Developer/usr/bin I added it to my PATH variable as follows: $ export PATH=$PATH:/Developer/usr/bin $ echo $PATH /opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin:/usr/X11/bin:/Developer/usr/bin When i try to configure it complains about not finding open-ssl, ok, not a big problem. So I try with --without-ssl : $ ./configure --without-ssl Checking for program g++ or c++ : /Developer/usr/bin/g++ Checking for program cpp : /Developer/usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /Developer/usr/bin/ranlib Checking for g++ : ok Checking for program gcc or cc : /Developer/usr/bin/gcc Checking for gcc : ok Checking for library dl : yes Checking for library util : yes Checking for library rt : not found --- libeio --- Checking for library pthread : yes Checking for function pthread_create : not found /Users/Guy/git_src/node/node/deps/libeio/wscript:13: error: the configuration failed (see '/Users/Guy/git_src/node/node/build/config.log') Anyone know how I can get round this? I am suspicious that it might be something to do with the PATH or another ENV variable, but not sure. Thanks G

  Read the article

• Puppet: array in parameterized classes VS using resources

  - by Luke404

  I have some use cases where I want to define multiple similar resources that should end up in a single file (via a template). As an example I'm trying to write a puppet module that will let me manage the mapping between MAC addresses and network interface names (writing udev's persistent-net-rules file from puppet), but there are also many other similar usage cases. I searched around and found that it could be done with the new parameterised classes syntax: if implemented that way it should end up being used like this: node { "myserver.example.com": class { "network::iftab": interfaces => { "eth0" => { "mac" => "ab:cd:ef:98:76:54" } "eth1" => { "mac" => "98:76:de:ad:be:ef" } } } } Not too bad, I agree, but it would rapidly explode when you manage more complex stuff (think network configurations like in this module or any other multiple-complex-resources-in-a-single-config-file stuff). In a similar question on SF someone suggested using Pienaar's puppet-concat module but I doubt it could get any better than parameterised classes. What would be really cool and clean in the configuration definition would be something like the included host type, it's usage is simple, pretty and clean and naturally maps to multiple resources that will end up being configured in a single place. Transposed to my example it would be like: node { "myserver.example.com": interface { "eth0": "mac" => "ab:cd:ef:98:76:54", "foo" => "bar", "asd" => "lol", "eth1": "mac" => "98:76:de:ad:be:ef", "foo" => "rab", "asd" => "olo", } } ...that looks much better to my eyes, even with 3x options to each resource. Should I really be passing arrays to parameterised classes, or there is a better way to do this kind of stuff? Is there some accepted consensus in the puppet [users|developers] community? By the way, I'm referring to the latest stable release of the 2.7 branch and I am not interested in compatibility with older versions.

  Read the article

• Bacula v5.0.2 Windows Installation Issues

  - by JohnyD

  First off, I am very new to Bacula but I'm very intriqued from what I've read. I'm looking to set up Bacula 5.0.2 on a Windows 2008 R2 server. I've run the installer and at the end it asks me to configure DIR name, DIR password, DIR Address. Windows documentation is somewhat hard to come by and I'm not certain what exactly I'm supposed to enter here. Do I need to create a local account that matches this info? Will the installation process create the account for me? Will this be the account that handles the FD daemon/service? I'm also not certain if Address means network location or local direcory. I apologize for my ignorance. Currently I'm trying to use the following information: Name: john pass: john address: thin1 (server name although I have also tried thin1.fqdm.local and 10.0.0.104) This info allows for the installer to complete successfully. However, when I run the BAT it hangs at, "Connecting to Director thin1:9101". The Bacula File Service is currently running under the local system account. What am I doing wrong? What do I have yet to do? Once I get this working properly I assume I will need to install clients on all my Windows boxes? Also, this is a 64-bit cpu but I am installing the 32-bit client. Are there any issues with this? Should I be using the 32-bit client? Thanks very much for the help.

  Read the article

• Occasional "Could not load file or assembly" in asmx WebService on IIS and DFS

  - by jesse-mcdowell

  We have a handfull of ASMX web service hosted on two identical Windows Server 2003 boxes. The virtual directory for the web services is loaded in a DFS share, both servers point to the same share. We have a load balancer between the internet and the two web servers. At a seemingly random interval (right now about twice per week) when a user tries to access a method on the web service, IIS returns the error: "Could not load file or assembly" for one of the assemblies used in the method call, and will continue reporting it each time the method is called until the app pool is recycled. We haven't found any distinguishable pattern to the problem. This is what I know: the missing assembly varies (but it's always a home-brew assembly) the Web Service method that fails varies there is no noticeable pattern to the times or intervals where the problem appears there are no admin users accessing the servers when the problem appears the failing method will work correctly on one server and fail on the other, even though both point to the same bin folder the problem can always be corrected by recycling the app pool and making no other changes I have enabled the Assembly Binder Log, and know that the binder is looking in the correct location for the file. Our assemblies are compiled for .Net 3.5.

  Read the article

• How to disable 3rd party cookies in Chrome?

  - by David Nordvall

  I have both the "stop websites from storing local data" and the "block all third party cookies without exception" settings enabled in Chrome 12 (I'm not sure what the exact names of these settings are in english as I run Chrome with swedish localization). I do however have two problems. My first problem is that when I'm visiting one of my local news paper's site (and surely other), cookies from www.facebook.com is allowed for some reason. I suspect that the reason is that I have added an exception to the www.facebook.com domain but as the setting "block all third party cookies without exception" implies, that shouldn't matter. My second problem is that if I check what cookies are stored on my computer after browsing for a while, I have tons of cookies that are not on my white list. Primarily from ad services. My expectations from enabling the above mentioned settings was that only cookies that fulfill the two folling requirements would be accepted: the cookies must be from the domain in my address bar the cookies must be from a domain on my whitelist Apparently this isn't the case. The question is, have I completely misunderstood the settings or is this a bug? And, either way, is there a way to accomplish my desired behavior?

  Read the article

• Broken UAC, cant edit File/folders or change settings in user account

  - by Antoros

  It appears that UAC is broken cant move/delete some file/folders, when asked to use administrative right (and say yes) it shows the loading bar and then nothings gets moved/deleted, no error whatsoever opened control panel, user account and when i click on any option with the Shield (administrative rights) the mouse changes to loading and thengo back to normal, not opening any menu or showing any error Already done a sfc /scannow , no errors found Already used Microsoft's Fix it, reclycle bin broken and repaired, still the same error Used microsoftaccounts tool , this are the errors i got: Problem with microsoft account policy... <- this is the problem (didint fix) Trust this PC <- loop of redirections, cant get to trust this pc (only one with w8) Problems witht sytem registration : i think it is because of the soft system reset Some setting have sync turned off : i never configured anything to sync Rootcauses found and created logs : would like to know where the logs are saved... had to use a ".reg" file to change uac setting to never notify, thinking it would fix this, no, it stoped asking though, i can still open a cmd with Administrative rights, but cant access to UAC settings Accesed Administrator account (net user administrator /active:yes)and even with that account could change any settings so there it is, dont know what else to do in the moment (this pc broke with 8.1 update and was restored to factory configuration, it broke several drivers and kept most of the registry entries, i cant find the cause of this problem. other info: i tried to delete a file in a program folder and couldnt, downloaded unlocker to check first if it was permissions but no, it showed me a msg telling me that there wasnt any error, and if i would like to delete it, clicked on yes, and it did delete it, what amuses me is that i cant without this tool, not even using the feature that takes over ownership Edit: wow, in a not crappy pc chkdsk is fast, completed with no errors found : /

  Read the article

• Birt on Tomcat unable to find JARs

  - by LostInTheWoods

  First, my setup: BiRT Runtime: 3.7.2. Ubuntu 10.04 Tomcat 6 Sun Java 1.6.0 I have a jar file I want to deploy onto the Tomcat server so it is usable by the runtime, so I placed the jar file in /var/lib/tomcat6/webapps/birt/WEB-INF/lib. As I understand it this is the default location for JAR files that are going to be used by a BiRT report. But the jar file is not accessible by the report that is trying to call it. In the BiRT logs I see: Error evaluating Javascript expression. Script engine error: ReferenceError: "DynDSinfo" is not defined. (/report/data-sources/oda-data-source[@id="54"]/method[@name="beforeOpen"]#20) Script source: /report/data-sources/oda-data-source[@id="54"]/method[@name="beforeOpen"], line: 0, text: __bm_beforeOpen() org.eclipse.birt.data.engine.core.DataException: Fail to execute script in function __bm_beforeOpen(). Source: "DynDSinfo" is the class I am trying to reference.. and now for the kicker... this works fine on Tomcat6 on Windows 7. The same files in the same places. So is there some additional configuration or some environmental variable that needs to be set, or something different on the Linux (Ubuntu) platform? All help or ideas gratefully received, Stephen

  Read the article

• Firefox isn't using my download manager (flash videos)

  - by John22

  I installed "Free Download Manager." I see the plugin in Tools-Add-ons (it doesn't have any options). I use several different flash video downloaders, because I haven't found one that works period on any site. When I save the video with two I tried, they are being downloaded by Firefox's default download manager (which means simultaneously - which is why I installed the download manager - I need them to download one at a time - in a prioritized queue.) [I used to use Flashgot (long ago), and it worked with some download manager I had installed - but over time it failed to see most videos. I installed Flashgot again, and it still fails to see anything but images and video ads.] Currently, I have to manually start Free Download Manager (from outside of Firefox), start the download in Firefox, stop it, copy the link location from Firefox's download menu, and then add it manually in Free Download Manager. Yuck. Do I need a different download manager (that takes over - recommendations?), or did I somehow install this one wrong or miss a setting somewhere in Firefox? Thanks for any help.

  Read the article

• gpfs: adding a new nsd server to a cluster

  - by alessandra

  I have a gpfs cluster composed by 10 linux nodes, managed by a primary server A, which also act as nsd server for a first stack of disks. I attached a new jbod to one of the nodes (call it node B), which I would like to become a nsd server for this new stack of disks, but still be included in the cluster so that the disks are available to all the nodes. Node B is connected to the cluster via ethernet. How can I make the new nsd seen by all the nodes of the cluster? I can create the new nsd but when trying to create the filesystem on node B it the command mmcrfs times out. It looks like the nodes of the cluster cannot understand the filesystem location even if I specify them attached to server B in the description file. Would it be better to remove node B from the cluster, create a cluster on its own with its attached filesystem and connect it remotely with the previous cluster? Or a clustered NFS solution would apply better? Can you please give me any suggestion?

  Read the article

• Ballooning Mac OS X kernel_task and Wired memory usage. How to diagnose / fix?

  - by user28930

  I have a very strange issue, which I'm having a hard time diagnosing as to the root cause. I have a Mac Pro (2008, 8-core 2.8 GHz, 8800GT) with 14 GB of RAM (recently upgraded because of this issue!). When I boot my system and log in, vm_stat / top / Activity Monitor will show that kernel_task has about 150 MB allocated, and the machine has about 800 MB of Wired memory being allocated. Even initially, 800 MB seems an awful lot of wired memory to be allocated with no applications running - but, it gets worse. (NB: Wired is locked, unswappable memory) After a very short time, sometimes triggered by something as simple as launching a terminal, kernel_task will balloon to 8-900 MB of Real Mem (RSIZE), and Wired Memory will accelerate to 1.6 GB (implying that all the extra memory requests are for wired RAM in the kernel). If I quit everything (I.E: no running applications, bar an activity monitor or terminal to view top), there is no appreciable reduction in either kernel_task RSIZE, or Wired Memory usage. Going the opposite way, and loading the system with tasks also shows that wired memory does not get reduced - and that importantly it is not reduced in preference to heavy swapping. If I log out and log back in again, it reduces a bit (450 MB kernel_task, 1.28 GB Wired), but not back to the start. I'm not running any wacky kexts - and futhermore, kextstat shows no huge memory allocations there; the largest being com.apple.nvidia.nv50hal at about 4 MB of Memory. The machine feels overall more sluggish when this has happened - unsurprisingly because such a huge amount of RAM has been marked as non-pageable. So I have a few questions: 1) Is there a good way to diagnose what has allocated all of this wired memory? It's often over 2 times the kernel_task size, running no applications. The real memory total doesn't seem to add up - it seems that there is a bunch of RAM that isn't being accounted for anywhere. 2) What is happening to cause the kernel to suddenly require 6 times as much memory?

  Read the article

< Previous Page | 554 555 556 557 558 559 560 561 562 563 564 565  | Next Page >