Search Results

Search found 11313 results on 453 pages for 'calavera info'.

Page 56/453 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Missing Wireless access point

  - by nvcnvn

  I have an: Ubuntu 12.04 with proprietary Boardcom STA Wireless driver installed BCM43224 802.11a/b/g/n wireless card TP-LINK TD-W8101G 54Mbps Wireless ADSL2+ Modem Router Yesterday before I went to sleep, I still connect to my wireless access point, this morning when I start my laptop I don't see it in the list - there are some neighbors listed but not mine. The WLAN is green, with my old Nokia E72, I still see my access point with 100% signal. I have tried to restart my laptop and turn the firmware off/on by the switch but no help. I have read the WirelessTroubleShootingGuide but I can do anything. Here is some of my card info: *-network description: Wireless interface product: BCM43224 802.11a/b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: c0:cb:38:06:5d:53 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 03 serial: f0:4d:a2:42:ab:e4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.1.3 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:42 ioport:5000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff memory:f0420000-f043ffff

  Read the article

• How to dual-boot Windows XP & Ubuntu 12.04

  - by user115554

  When I install Ubuntu 12.04 along side Windows XP, I encountered a choice for "Device for boot loader installation". I selected "Windows XP Professional" Now, when I select Windows XP from the grub, it appeares a black page and Windwos dosent boot. I tried Boot-Repair from Ubuntu but it dosent solve this problem. The only thing that helps me to boot Windwos XP is a Bootable CD of Windows. when I put this CD and boot from CD, it shows some options and when I select "Boot from Hard Drive" , my own Windows boots! Here's is a snippet from the bootinfoscript report: ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99-2.00) is installed in the boot sector of sda1 and looks at sector 525709174 of the same hard drive for core.img, but core.img can not be found at this location. No errors found in the Boot Parameter Block. Boot file info: Grub2 (v1.97-1.98) in the file /mbr_backup.log looks at sector 1 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM

  Read the article

• Automatically create bug resolution task using the TFS 2010 API

  - by Bob Hardister

  My customer requires bug resolution to be approved and tracked.  To minimize the overhead for developers I implemented a TFS 2010 server-side plug-in to automatically create a child resolution task for the bug when the “CCB” field is set to approved. The CCB field is a custom field.  I also added the story points field to the bug WIT for sizing purposes. Redundant tasks will not be created unless the bug title is changed or the prior task is closed. The program writes an audit trail to a log file visible in the TFS Admin Console Log view. Here’s the code. BugAutoTask.cs /* SPECIFICATION * When the CCB field on the bug is set to approved, create a child task where the task: * name = Resolve bug [ID] - [Title of bug] * assigned to = same as assigned to field on the bug * same area path * same iteration path * activity = Bug Resolution * original estimate = bug points * * The source code is used to build a dll (Ows.TeamFoundation.BugAutoTaskCreation.PlugIns.dll), * which needs to be copied to * C:\Program Files\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin\Plugins * on ALL TFS application-tier servers. * * Author: Bob Hardister. */ using System; using System.Collections.Generic; using System.IO; using System.Xml; using System.Text; using System.Diagnostics; using System.Linq; using Microsoft.TeamFoundation.Common; using Microsoft.TeamFoundation.Framework.Server; using Microsoft.TeamFoundation.WorkItemTracking.Client; using Microsoft.TeamFoundation.WorkItemTracking.Server; using Microsoft.TeamFoundation.Client; using System.Collections; namespace BugAutoTaskCreation { public class BugAutoTask : ISubscriber { public EventNotificationStatus ProcessEvent(TeamFoundationRequestContext requestContext, NotificationType notificationType, object notificationEventArgs, out int statusCode, out string statusMessage, out ExceptionPropertyCollection properties) { statusCode = 0; properties = null; statusMessage = String.Empty; // Error message for for tracing last code executed and optional fields string lastStep = "No field values found or set "; try { if ((notificationType == NotificationType.Notification) && (notificationEventArgs.GetType() == typeof(WorkItemChangedEvent))) { WorkItemChangedEvent workItemChange = (WorkItemChangedEvent)notificationEventArgs; // see ConnectToTFS() method below to select which TFS instance/collection // to connect to TfsTeamProjectCollection tfs = ConnectToTFS(); WorkItemStore wiStore = tfs.GetService<WorkItemStore>(); lastStep = lastStep + ": connection to TFS successful "; // Get the work item that was just changed by the user. WorkItem witem = wiStore.GetWorkItem(workItemChange.CoreFields.IntegerFields[0].NewValue); lastStep = lastStep + ": retrieved changed work item, ID:" + witem.Id + " "; // Filter for Bug work items only if (witem.Type.Name == "Bug") { // DEBUG lastStep = lastStep + ": changed work item is a bug "; // Filter for CCB (i.e. Baseline Status) field set to approved only bool BaselineStatusChange = false; if (workItemChange.ChangedFields != null) { ProcessBugRevision(ref lastStep, workItemChange, wiStore, ref witem, ref BaselineStatusChange); } } } } catch (Exception e) { Trace.WriteLine(e.Message); Logger log = new Logger(); log.WriteLineToLog(MsgLevel.Error, "Application error: " + lastStep + " - " + e.Message + " - " + e.InnerException); } statusCode = 1; statusMessage = "Bug Auto Task Evaluation Completed"; properties = null; return EventNotificationStatus.ActionApproved; } // PRIVATE METHODS private static void ProcessBugRevision(ref string lastStep, WorkItemChangedEvent workItemChange, WorkItemStore wiStore, ref WorkItem witem, ref bool BaselineStatusChange) { foreach (StringField field in workItemChange.ChangedFields.StringFields) { // DEBUG lastStep = lastStep + ": last changed field is - " + field.Name + " "; if (field.Name == "Baseline Status") { lastStep = lastStep + ": retrieved bug baseline status field value, bug ID:" + witem.Id + " "; BaselineStatusChange = (field.NewValue != field.OldValue); if ((BaselineStatusChange) && (field.NewValue == "Approved")) { // Instanciate logger Logger log = new Logger(); // *** Create resolution task for this bug *** // ******************************************* // Get the team project and selected field values of the bug work item Project teamProject = witem.Project; int bugID = witem.Id; string bugTitle = witem.Fields["System.Title"].Value.ToString(); string bugAssignedTo = witem.Fields["System.AssignedTo"].Value.ToString(); string bugAreaPath = witem.Fields["System.AreaPath"].Value.ToString(); string bugIterationPath = witem.Fields["System.IterationPath"].Value.ToString(); string bugChangedBy = witem.Fields["System.ChangedBy"].OriginalValue.ToString(); string bugTeamProject = witem.Project.Name; lastStep = lastStep + ": all mandatory bug field values found "; // Optional fields Field bugPoints = witem.Fields["Microsoft.VSTS.Scheduling.StoryPoints"]; if (bugPoints.Value != null) { lastStep = lastStep + ": all mandatory and optional bug field values found "; } // Initialize child resolution task title string childTaskTitle = "Resolve bug " + bugID + " - " + bugTitle; // At this point I can check if a resolution task (of the same name) // for the bug already exist // If so, do not create a new resolution task bool createResolutionTask = true; WorkItem parentBug = wiStore.GetWorkItem(bugID); WorkItemLinkCollection links = parentBug.WorkItemLinks; foreach (WorkItemLink wil in links) { if (wil.LinkTypeEnd.Name == "Child") { WorkItem childTask = wiStore.GetWorkItem(wil.TargetId); if ((childTask.Title == childTaskTitle) && (childTask.State != "Closed")) { createResolutionTask = false; log.WriteLineToLog(MsgLevel.Info, "Team project " + bugTeamProject + ": " + bugChangedBy + " - set the CCB field to \"Approved\" for bug, ID: " + bugID + ". Task not created as open one of the same name already exist, ID:" + childTask.Id); } } } if (createResolutionTask) { // Define the work item type of the new work item WorkItemTypeCollection workItemTypes = wiStore.Projects[teamProject.Name].WorkItemTypes; WorkItemType wiType = workItemTypes["Task"]; // Setup the new task and assign field values witem = new WorkItem(wiType); witem.Fields["System.Title"].Value = "Resolve bug " + bugID + " - " + bugTitle; witem.Fields["System.AssignedTo"].Value = bugAssignedTo; witem.Fields["System.AreaPath"].Value = bugAreaPath; witem.Fields["System.IterationPath"].Value = bugIterationPath; witem.Fields["Microsoft.VSTS.Common.Activity"].Value = "Bug Resolution"; lastStep = lastStep + ": all mandatory task field values set "; // Optional fields if (bugPoints.Value != null) { witem.Fields["Microsoft.VSTS.Scheduling.OriginalEstimate"].Value = bugPoints.Value; lastStep = lastStep + ": all mandatory and optional task field values set "; } // Check for validation errors before saving the new task and linking it to the bug ArrayList validationErrors = witem.Validate(); if (validationErrors.Count == 0) { witem.Save(); // Link the new task (child) to the bug (parent) var linkType = wiStore.WorkItemLinkTypes[CoreLinkTypeReferenceNames.Hierarchy]; // Fetch the work items to be linked var parentWorkItem = wiStore.GetWorkItem(bugID); int taskID = witem.Id; var childWorkItem = wiStore.GetWorkItem(taskID); // Add a new link to the parent relating the child and save it parentWorkItem.Links.Add(new WorkItemLink(linkType.ForwardEnd, childWorkItem.Id)); parentWorkItem.Save(); log.WriteLineToLog(MsgLevel.Info, "Team project " + bugTeamProject + ": " + bugChangedBy + " - set the CCB field to \"Approved\" for bug, ID:" + bugID + ", which automatically created child resolution task, ID:" + taskID); } else { log.WriteLineToLog(MsgLevel.Error, "Error in creating bug resolution child task for bug ID:" + bugID); foreach (Field taskField in validationErrors) { log.WriteLineToLog(MsgLevel.Error, " - Validation Error in task field: " + taskField.ReferenceName); } } } } } } } private TfsTeamProjectCollection ConnectToTFS() { // Connect to TFS string tfsUri = string.Empty; // Production TFS instance production collection tfsUri = @"xxxx"; // Production TFS instance admin collection //tfsUri = @"xxxxx"; // Local TFS testing instance default collection //tfsUri = @"xxxxx"; TfsTeamProjectCollection tfs = new TfsTeamProjectCollection(new System.Uri(tfsUri)); tfs.EnsureAuthenticated(); return tfs; } // HELPERS public string Name { get { return "Bug Auto Task Creation Event Handler"; } } public SubscriberPriority Priority { get { return SubscriberPriority.Normal; } } public enum MsgLevel { Info, Warning, Error }; public Type[] SubscribedTypes() { return new Type[1] { typeof(WorkItemChangedEvent) }; } } } Logger.cs using System; using System.Collections.Generic; using System.IO; using System.Linq; using System.Text; using System.Windows.Forms; namespace BugAutoTaskCreation { class Logger { // fields private string _ApplicationDirectory = @"C:\ProgramData\Microsoft\Team Foundation\Server Configuration\Logs"; private string _LogFileName = @"\CFG_ACCT_AT_OWS_BugAutoTaskCreation.log"; private string _LogFile; private string _LogTimestamp = DateTime.Now.ToString("MM/dd/yyyy HH:mm:ss"); private string _MsgLevelText = string.Empty; // default constructor public Logger() { // check for a prior log file FileInfo logFile = new FileInfo(_ApplicationDirectory + _LogFileName); if (!logFile.Exists) { CreateNewLogFile(ref logFile); } } // properties public string ApplicationDirectory { get { return _ApplicationDirectory; } set { _ApplicationDirectory = value; } } public string LogFile { get { _LogFile = _ApplicationDirectory + _LogFileName; return _LogFile; } set { _LogFile = value; } } // PUBLIC METHODS public void WriteLineToLog(BugAutoTask.MsgLevel msgLevel, string logRecord) { try { // set msgLevel text if (msgLevel == BugAutoTask.MsgLevel.Info) { _MsgLevelText = "[Info @" + MsgTimeStamp() + "] "; } else if (msgLevel == BugAutoTask.MsgLevel.Warning) { _MsgLevelText = "[Warning @" + MsgTimeStamp() + "] "; } else if (msgLevel == BugAutoTask.MsgLevel.Error) { _MsgLevelText = "[Error @" + MsgTimeStamp() + "] "; } else { _MsgLevelText = "[Error: unsupported message level @" + MsgTimeStamp() + "] "; } // write a line to the log file StreamWriter logFile = new StreamWriter(_ApplicationDirectory + _LogFileName, true); logFile.WriteLine(_MsgLevelText + logRecord); logFile.Close(); } catch (Exception) { throw; } } // PRIVATE METHODS private void CreateNewLogFile(ref FileInfo logFile) { try { string logFilePath = logFile.FullName; // write the log file header _MsgLevelText = "[Info @" + MsgTimeStamp() + "] "; string cpu = string.Empty; if (Environment.Is64BitOperatingSystem) { cpu = " (x64)"; } StreamWriter newLog = new StreamWriter(logFilePath, false); newLog.Flush(); newLog.WriteLine(_MsgLevelText + "===================================================================="); newLog.WriteLine(_MsgLevelText + "Team Foundation Server Administration Log"); newLog.WriteLine(_MsgLevelText + "Version : " + "1.0.0 Author: Bob Hardister"); newLog.WriteLine(_MsgLevelText + "DateTime : " + _LogTimestamp); newLog.WriteLine(_MsgLevelText + "Type : " + "OWS Custom TFS API Plug-in"); newLog.WriteLine(_MsgLevelText + "Activity : " + "Bug Auto Task Creation for CCB Approved Bugs"); newLog.WriteLine(_MsgLevelText + "Area : " + "Build Explorer"); newLog.WriteLine(_MsgLevelText + "Assembly : " + "Ows.TeamFoundation.BugAutoTaskCreation.PlugIns.dll"); newLog.WriteLine(_MsgLevelText + "Location : " + @"C:\Program Files\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin\Plugins"); newLog.WriteLine(_MsgLevelText + "User : " + Environment.UserDomainName + @"\" + Environment.UserName); newLog.WriteLine(_MsgLevelText + "Machine : " + Environment.MachineName); newLog.WriteLine(_MsgLevelText + "System : " + Environment.OSVersion + cpu); newLog.WriteLine(_MsgLevelText + "===================================================================="); newLog.WriteLine(_MsgLevelText); newLog.Close(); } catch (Exception) { throw; } } private string MsgTimeStamp() { string msgTimestamp = string.Empty; return msgTimestamp = DateTime.Now.ToString("yyyy-MM-dd HH:mm:ss:fff"); } } }

  Read the article

• still about perl vs python but (to me) slightly different from what has been asked [closed]

  - by B Chen

  Being a newbie to coding, I read from this site that Perl is still as viable as it has been, while Python, quoted from someone else's post, is good but just "snake oil" (not sure what this refers to exactly though). So from the responses in that post, I got the gist that Perl is good and worthy to learn. My question is - pardon me for phrasing it in this "non-programmer's" way - Which one should I learn FIRST? (I am actually currently learning R) Here below is the background info - (a) I will be using it mostly for data mining and statistics analysis (b) Will there be this "first" and "later" issue with learning either Perl or Python? That is, after I become competent with one language, would there be a need to learn the second one (for a similar task??) (c) If there should be circumstances where I must learn the second one, would learning Perl FIRST be better than learning Python? I hope to learn as much from exchanging info here, so please help provide with more than just "it depends" type of info. Great many thanks to all who choose to respond to my query.

  Read the article

• Reflection and the params Keyword

  - by Robert May

  I’ve had to look this up a couple of times, and there’s not much out there, so I end up guessing the same answer over and over. When using MethodBase.GetParameters() to get an array of ParameterInfo object, I often want to get a count of the number of parameters that are out, optional, params, etc.  For out and optional, you can simply check ParameterInfo.IsOut or ParameterInfo.IsOptional or any number of other “Attributes”. However, for params, there isn’t a property on ParameterInfo.  Instead, you have to do this: info.GetCustomAttributes(typeof(ParamArrayAttribute), true) This will get you a set of all of the attributes that are the ParamArrayAttribute, which you can then turn into a linq statement that looks like this: methodParameters.Count(info => info.GetCustomAttributes(typeof(ParamArrayAttribute), true).Count() > 0); Which, assuming that methodParameters is the result of MethodBase.GetParameters, will give you a count of the number of parameters that have the params keyword.  Of course, there can be only one, but who’s counting! Now, hopefully, the next time I try to look this up, my own blog will get the values. Technorati Tags: Reflection

  Read the article

• Software Center not Opening at all Error

  - by Newbie

  When I open software from menu, it says "cannot open software database. Please reinstall the software-center package. When I write software-center on terminal, such error comes: 2014-05-28 09:11:20,584 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2014-05-28 09:11:20,593 - softwarecenter.ui.gtk3.app - ERROR - xapian open failed Traceback (most recent call last): File "/usr/share/software-center/softwarecenter/ui/gtk3/app.py", line 302, in __init__ if self.db.schema_version() != DB_SCHEMA_VERSION: File "/usr/share/software-center/softwarecenter/db/database.py", line 289, in schema_version return self.xapiandb.get_metadata("db-schema-version") File "/usr/share/software-center/softwarecenter/db/database.py", line 177, in xapiandb self._db_per_thread[thread_name] = self._get_new_xapiandb() File "/usr/share/software-center/softwarecenter/db/database.py", line 190, in _get_new_xapiandb xapiandb = xapian.Database(self._db_pathname) File "/usr/lib/python2.7/dist-packages/xapian/__init__.py", line 3667, in __init__ _xapian.Database_swiginit(self,_xapian.new_Database(*args)) DatabaseCorruptError: /var/cache/software-center/xapian/iamchert: Chert version file should be 28 bytes, actually 0 Now, when I write command sudo apt-get remove software-center dpkg: error: corrupt info database format file '/var/lib/dpkg/info/format' E: Sub-process /usr/bin/dpkg returned an error code (2) I had ubuntu before but it kind of got corrupted. Now, I have freshly reinstalled it and even at start, software center is not opening and this error comes. I hope you have a solution. Thanks.

  Read the article

• cannot mount root filesystem on 10.04

  - by howaryoo

  I tried to apply the recommendation of question: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) After running that command: sudo mount --bind /dev /mnt/dev I get this error message: mount: mount point /mnt/dev does not exist fdisk -l returns /dev/sda1 /dev/sda2 /dev/sda5 do I need to mount sda2 and sda5? Edited after @psusi's comment: /dev/sda1 is the boot file system It seems that I need to mount sda2 or sda5. Here is what I tried: (I tried this on a virtual machine so the sda(s) are now vda(s) ) ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/vda: 19.3 GB, 19327352832 bytes 16 heads, 63 sectors/track, 37449 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008eece Device Boot Start End Blocks Id System /dev/vda1 * 3 496 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/vda2 498 37448 18622465 5 Extended Partition 2 does not end on cylinder boundary. /dev/vda5 498 37448 18622464 8e Linux LVM ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo mount -t ext4 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ sudo mount -t ext2 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ Any info that can help me rescue that server would be greatly appreciated!

  Read the article

• Centrino Wireless-N 1000 takes forever to connect and keeps asking for password

  - by waclock

  A few days ago I started having this problem. When I tried to connect to any WiFi Connection it would stay connecting forever, and after a minute or so it would ask me for the password again. The strange thing is that this happened out of nowhere, I did not install any new drivers or anything like that. After this happened I decided to uninstall ubuntu and install it again ("inside windows") but the problem is still there. Any suggestions would be greatly appreciated. 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:aa:e4:7d size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:50 ioport:4000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:09:9c:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-23-generic-pae firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:c4500000-c4501fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.2 logical name: eth1 serial: ee:85:2f:7d:80:96 capabilities: ethernet physical configuration: broadcast=yes driver=ipheth ip=172.20.10.2 link=yes multicast=yes

  Read the article

• CodePlex Daily Summary for Saturday, November 10, 2012

  CodePlex Daily Summary for Saturday, November 10, 2012Popular ReleasesImageGlass: Version 1.5: http://i1214.photobucket.com/albums/cc483/phapsuxeko/ImageGlass/1.png v1.5.4401.3015 Thumbnail bar: Increase loading speed Thumbnail image with ratio Support personal customization: mouse up, mouse down, mouse hover, selected item... Scroll to show all items Image viewer Zoom by scroll, or selected rectangle Speed up loading Zoom to cursor point New background design and customization and others... v1.5.4430.483 Thumbnail bar: Auto move scroll bar to selected image Show / Hi...Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 002: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes: A fix for the Netflix example from Chapter 6 that was missing a service reference A fix for the ImageHelper issue (images were not being saved) - this was due to the buffer being inadequate and required streaming the writeable bitmap to a buffer first before encoding and savingmyCollections: Version 2.3.2.0: New in this version : Added TheGamesDB.net API for Games and NDS Added Support for Windows Media Center Added Support for myMovies Added Support for XBMC Added Support for Dune HD Added Support for Mede8er Added Support for WD HDTV Added Fast search options Added order by Artist/Album for music You can now create covers and background for games You can now update your ID3 tag with the info of myCollections Fixed several provider Performance improvement New Splash ...Draw: Draw 1.0: Drawing PadPdfReport: PdfReport 1.4: - Added Html Footer Template. - Added a new HeaderTemplate (HtmlHeader) to simplify creating the headers of pages and groups by using HTML. See HtmlHeader/HtmlHeaderPdfReport.cs sample for more info. - Added a new sample (HtmlCellTemplate/HtmlCellTemplatePdfReport.cs) to show how to use the HtmlField template for creating the custom cell templates. - Added transparency setting to DiagonalWatermark. See ProgressReportPdfReport for more info. - Added DynamicCompile/DynamicCompilePdfReport.cs sa...Player Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...Umbraco CMS: Umbraco 4.10.0: NugetNuGet BlogRead the release blog post for 4.10.0. Whats newMVC support New request pipeline Many, many bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesWe have done all we can not to break backwards compatibility, but we had to do some minor breaking changes: Removed graphicHeadlineFormat config setting from umbracoSettings.config (an old relic from the 3.x days) U4-690 DynamicNode ChildrenAsList was fixed, altering it'...MySQL Tuner for Windows: 0.3: Welcome to the third beta of MySQL Tuner for Windows! This release fixes bugs in the displaying of numbers, and a crash that occurred due to the program incorrectly closing and disposing of resources, Be warned that there will be bugs in this release, so please do not use on production or critical systems. Do post details of issues found to the issue tracker, and I will endeavour to fix them, when I can. I would love to have your feedback, and if possible your support! Requirements Microso...SharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.D3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...MFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.3: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.3 For detailed release notes check the release notes. TypeScript supportWrite your code in a ...MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesFoxyXLS: FoxyXLS Releases: Source code and samplesWindow Manager: Window Manager 1.0: First releaseProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...New ProjectsAuthor-it Variables Report Plug-in: The Variable Information Plug-in is an Author-it plug-in that displays information about all the variables in a library.bobthebuilder: Bob the builderCalendarSite: This webapplicaton is a calendar and appoinement manager app.ControlIP: This project helps users make the control task in a projectDaily Math Training: Daily Math Training app is Windows 8 app for children.Diablo III: This Project will contain several Diablo III related Implementations (a Windows 8 App another API Implementation, maybe some Calculators...)gelform: Ejercicio UTNJHashWin: Calcular hash MD5 SHA1 SHA256 SHA512 de arquivos MultiTask .NET 4.0 C# Marron TFS: Marron TFSMiddle Tennessee State University Robotics Team: Home of the MTSU Raider Robotics team.myexam: examN2F Router: The Zibings, N2Framework, url mapping/router project.NZBMatrix Advanced Feed Reader: This project is simple filter for NZBMatrix website feeds to update user with new movies which falls into the predefined customizable search templates.OpenTrading: Projeto em VB .net 3.5 que utiliza Active Record para mapeamento do banco de dados diretamente na classe das entidades e NHibernate para persistência dos dadosProjeto Parque - PI: Este projeto é resultado de um trabalho que realizamos todos os semestres na faculdade. 4º BSI - Centro Universitário Senac. QuesSys: this project is about examinationsample of inheritance: this project a sample of inheritance between classes at C#SharePoint 2013 Search Query Tool: Tool to test and debug the Search REST API in SharePoint 2013. Issue GET and POST search and suggestions queries. Use also against SharePoint Online. SharePoint Metro Grid: SharePoint 2010/2013 web part that displays links in Metro Tile Grid format. Just like Windows 8. Includes 215 images in 7 different sizes. Or use your own.SQL Server Partitioned Table Framework: The SQL Server Partitioned Table Framework (PTF) consists of a set of T-SQL Procedures that ease the maintenance work associated with partitioned tables.String -By GigaPlux Inc.: String OS is a operating system that was developed using C# and is based on the cosmos project .It has a beautiful File System by GRUNT.svu cms: first cms with chat and message between user vConsole for Windows 8: Just a very simple little app to help IT folks stuck in vSphere 5.0 with Win 8 console issues until you get to the next version of vSphereWikiprep#: The Wikiprep program is completely written in C# and based on .Net 4.0 . It processes Wikipedia dumps.Windows 8 Lock Screen: Windows 8 Lock Screen is a app that works like the Windows 8 Lock Screenwsccproject: updates will be made in due time during development

  Read the article

• Unity 3D does not work on Dell system with a AMD Radeon HD 6470M

  - by VeeKay

  I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

  Read the article

• Analyzing Memory Usage: Java vs C++ Negligible?

  - by Anthony

  How does the memory usage of an integer object written in Java compare\contrast with the memory usage of a integer object written in C++? Is the difference negligible? No difference? A big difference? I'm guessing it's the same because an int is an int regardless of the language (?) The reason why I asked this is because I was reading about the importance of knowing when a program's memory requirements will prevent the programmer from solving a given problem. What fascinated me is the amount of memory required for creating a single Java object. Take for example, an integer object. Correct me if I'm wrong but a Java integer object requires 24 bytes of memory: 4 bytes for its int instance variable 16 bytes of overhead (reference to the object's class, garbage collection info & synchronization info) 4 bytes of padding As another example, a Java array (which is implemented as an object) requires 48+bytes: 24 bytes of header info 16 bytes of object overhead 4 bytes for length 4 bytes for padding plus the memory needed to store the values How do these memory usages compare with the same code written in C++? I used to be oblivious about the memory usage of the C++ and Java programs I wrote, but now that I'm beginning to learn about algorithms, I'm having a greater appreciation for the computer's resources.

  Read the article

• How to associate all file types within Wine with its corresponding native application?

  - by MestreLion

  This is easily done for a single file type, as answered in How to associate a file type within Wine with a native application?, by creating a .reg for the desired filetype. But this is for AVI only. I use some wine apps (uTorrent, Soulseek, Eudora, to name a few) that can launch a wide range of files. Email attachments, for example, can be JPG, DOC, PDF, PPS... its impossible (and not desirable) to track down all possible file types that one may receive in an email or download in a torrent. So I neeed a solution to be more generic and broad. I need the file association to honor whatever native app is currently configured. And I want this to be done for all file types configured in my system. I've already figured out how to make the solution generic. Simply replacing the launched app in .reg for winebrowser, like this: [HKEY_CLASSES_ROOT\.pdf] @="PDFfile" "Content Type"="application/pdf" [HKEY_CLASSES_ROOT\PDFfile\Shell\Open\command] @="C:\\windows\\system32\\winebrowser.exe \"%1\"" Ive tested this and it works correctly. Since winebrowser uses xdg-open as a backend, and converts my windows path to a Unix one, the correct (Linux) app is launched. So I need a "batch" updater to wine's registry, sort of a wine-update-associations script that I can run whenever a new app is installed. Maybe a tool that can: List all Mime Types types in my system that have a default, installed app associated Extract all the needed info (glob, mime type, etc) Generate the .REG file in the above format The tricky part is: i've searched a LOT to find info about how association is done in Ubuntu 10.10 onwards, and documentation is scarce and confusing, to say the least. Freedesktop.org has no complete spec, and even Gnome docs are obsolete. So far I've gathered 4 files that contain association info, but im clueless on which (or why) to use, or how to use them to generate the .reg file: ~/.local/share/applications/mimeapps.list ~/.local/share/applications/miminfo.cache /usr/share/applications/miminfo.cache /etc/gnome/defaults.list Any help, script or explanation would be greatly appreciated! Thanks!

  Read the article

• Why are my videos playing speeded up with no audio, but work fine if I log in as a guest?

  - by Martins Kruze

  Since the start of this week I have been experiencing a glitch in the multimedia on my Samsung R518 laptop. I have 2 problems: Videos in every player are speeded up around 2 or 4 times (including youtube.com (both HTML5 and flash variants), any other video on the web and videos on my laptop played by Totem Media Player), exception is VLC player, but 2nd problem does concern even that. There is no sound - simple as that (with or without headphones plugged in). These all problems are now, and has not seen before, I upgraded to Ubuntu 10.10 after it was possible, and from start I didn't have anything from this - it just started in this week. I haven't even putted new software in. I have more or less solved the question (kind of) - I just logged in as a guest - and it all works, but when I make a new user - it does not. Please help me. Some stats below: sudo lshw -c sound *-multimedia description: Audio device product: RV710/730 vendor: ATI Technologies Inc physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:48 memory:cfeec000-cfeeffff *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:47 memory:fc200000-fc203fff sudo lshw -c video *-display description: VGA compatible controller product: M92 LP [Mobility Radeon HD 4300 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:46 memory:d0000000-dfffffff ioport:2000(size=256) memory:cfef0000-cfefffff memory:cfe00000-cfe1ffff

  Read the article

• Unable to mount an LVM Hard-drive after upgrade

  - by Bruce Staples

  I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

  Read the article

• How to handle key in PhP array if the key contains japanese characters [migrated]

  - by Jim Thio

  I have this array: [ID] => ????????-???????????__35.79_139.72 [Email] => [InBuildingAddress] => [Price] => [Street] => [Title] => ???????? ??????????? [Website] => [Zip] => [Rating Star] => 0 [Rating Weight] => 0 [Latitude] => 35.7865334803033 [Longitude] => 139.716800710514 [Building] => [City] => Unknown_Japan [OpeningHour] => [TimeStamp] => 0000-00-00 00:00:00 [CountViews] => 0 Then I do something like this: $output[$info['ID']]=$info; //mess up here $tes=$info['ID']['Title']; Well guess what it messes up. Basically even though the content of an array in PhP can be Japanese. Is this true? What's wrong. The error I got is: Debug Warning: /sdfdsfdf/api/test2.php line 36 - Cannot find element ????????-???????????__35.79_139.72 in variable Debug Warning: /sdfdsfdf/api/test2.php line 36 - main() [function.main]: It is not safe to rely on the system's timezone settings. You are required to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Asia/Krasnoyarsk' for '7.0/no DST' instead So many question mark Why is this happening. What's really going on inside PhP? Where can I learn more of such things. Most importantly, what would be the best way to handle this situation. Should I tell PhP to internally always use UTF-8? Does PhP array inherenty cannot use non ascii id?

  Read the article

• How do I connect to a wireless network?

  - by Keith Groben

  I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

  Read the article

• Partition does not start on physical sector boundary?

  - by jasmines

  I've one HD on my laptop, with two partitions (one ext3 with Ubuntu 12.04 installed and one swap). fdisk is giving me a Partition 1 does not start on physical sector boundary warning. What is the cause and do I need to fix it? If so, how? This is sudo fdisk -l: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 testine, 63 settori/tracce, 91201 cilindri, totale 1465149168 settori Unità = settori di 1 * 512 = 512 byte Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Identificativo disco: 0x5a25087f Dispositivo Boot Start End Blocks Id System /dev/sda1 * 63 1448577023 724288480+ 83 Linux Partition 1 does not start on physical sector boundary. /dev/sda2 1448577024 1465147391 8285184 82 Linux swap / Solaris This is sudo lshw related result: *-disk description: ATA Disk product: WDC WD7500BPKT-0 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21CC1T0847 size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=5a25087f *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: cc5c562a-bc59-4a37-b589-805b27b2cbd7 size: 690GiB capacity: 690GiB capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-27 09:18:28 filesystem=ext3 modified=2012-06-23 18:33:59 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-06-28 00:20:47 state=mounted *-volume:1 description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 1 serial: 16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 size: 8091MiB capacity: 8091MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 These are related /etc/fstab lines: UUID=cc5c562a-bc59-4a37-b589-805b27b2cbd7 / ext3 errors=remount-ro,user_xattr 0 1 UUID=16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 none swap sw 0 0

  Read the article

• Ubuntu 3D does not work on Dell system with a AMD Radeon HD 6470M

  - by VeeKay

  I am running 64 bit Ubuntu on Dell with 1GB graphic card. I login with "Ubuntu" hoping to see Unity 3d but it doesn't. Unity 2D runs instead. when I type in echo "$DESKTOP_SESSION" it confirms the Unity-2D. I've checked the System info that shows like : The graphics row shows itself as empty. SO I've presumed that the graphic drivers aren't detected and hence I went to Unity- Additional Drivers and installed the fglrx driver that the UI has suggested. Even after installing so, the graphics part in System info details shows nothing and still Unity 2D runs in spite of all the effort. Please help! How can I get my Unity 3D back? Hardware Info Video Card : AMD Radeon™ HD 6470M - 1GB (For ICC) RAM : 6GB (1 X 2GB + 1 X 4GB) 2 DIMM DDR3 1333Mhz OS : 64 bit Ubuntu 11.10 Edit : Output for /usr/lib/nux/unity_support_test -p X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 155 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 21 Current serial number in output stream: 21

  Read the article

• ubuntu 11.10 can't find wireless after waking from sleep

  - by Colleen

  I've tried a lot of proposed solutions, most of them adding files to /etc/pm/config.d, as well as WiFi stops working after waking from suspend and nothing has worked. hardware info: [colleen@colleen-HP ~]$ sudo lshw -C network [sudo] password for colleen: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:b1:ea:67 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:4000(size=256) memory:c1404000-c1404fff memory:c1400000-c1403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 8c:a9:82:99:48:8c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-21-generic-pae firmware=39.31.5.1 build 35138 ip=192.168.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:c5500000-c5501fff Is anyone else still having this problem? The two solutions I haven't tried are installing wicd and upgrading because I've heard both are kind of unstable/buggy and wicd frankly scares me.

  Read the article

• Change the Log Level of Node Manager.

  - by adejuanc

  This is useful to troubleshoot issues related to Node Manager, such as problems starting a Managed Server or reasons a server could be (re)started. To change the Log Level of Node Manager, you need to edit the nodemanager.properties file. This is usually located at: <MIDDLEWARE_HOME>/wlserver_10.3/common/nodemanager What you need to modify is property: ...LogLevel=INFO... Information about the appropriate values for this property is available in the Node Manager Documentation at 10.3 WebLogic Documentation (and in further releases) which states: LogLevel: Severity level of logging used for the Node Manager log. Node Manager uses the same logging levels as WebLogic Server. Default value: INFO However, this is incorrect. WLS has its own implementation of LogLevel, but Node Manager uses the standard Log Level from the java.util.logging.Level class. Therefore, the possible values for Node Manager LogLevel, in descending order are: SEVERE (highest value) WARNING INFO CONFIG FINE FINER FINEST (lowest value) The highest value provides only messages at the severe level. The warning level provides warning messages and severe messages, and so on. Besides those levels, ALL and OFF are also accepted. For example, if you only want Severe messages to be logged, select SEVERE. If you need the most detailed tracing available, select FINEST. For more information on what it will log at each level, please read the Java SE API for LoggingLevel.

  Read the article

• ATI 9550 shows up as laptop in displays after update to 12.04, how do I fix this?

  - by D_H

  My guess is this is on here somewhere but I have searched and even tried looking at bunch of other similar video problems. My ATI 9550 shows up as laptop in displays after update to Ubuntu 12.04, how do I fix this? I found the following command on another post sudo lshw -c video. I get this when I run that command: *-display:0 UNCLAIMED description: VGA compatible controller product: RV350 AS [Radeon 9550] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 66MHz capabilities: agp agp-3.0 pm vga_controller bus_master cap_list configuration: latency=32 mingnt=8 resources: memory:c0000000-cfffffff ioport:c000(size=256) memory:e5000000-e500ffff memory:e4000000-e401ffff *-display:1 UNCLAIMED description: Display controller product: RV350 AS [Radeon 9550] (Secondary) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 66MHz capabilities: pm cap_list configuration: latency=32 mingnt=8 resources: memory:d0000000-dfffffff memory:e5010000-e501ffff" This way more info than the command showed in he other post and as far as I can tell right. This doesn't look to me like a laptop video would list? I also see this command xrandr, it reports this: xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024 default connected 1280x1024+0+0 0mm x 0mm 1280x1024 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 This is what shows in displays for resolutions but only the 1280x1024 works the others produce tearing in the video. Also I should have mentioned 3D mode does not work. I have tried ATI/AMD drivers the new one won't load and older ones won't work. I found out the newer driver no longer supports the 9550.

  Read the article

• Split up a screen into regions

  - by nexen

  My task: I want to split up a screen into 3 regions for buffs-bar (with picked items), score-info and a game-map. It doesn't matter are regions intersect with each other or not. For example: I have a screen with width=1; height=1 and the origin of coordinates (0;0) is the left bottom point. I have 3 functions: draw items, draw info, draw map. If I use it without any matrix transformations, it draws fullscreen, because it's vertex coordinates are from 0;0 to 1;1. (pseudo-code) drawItems(); drawInfo(); drawMap(); And after that I see only map onto info onto items. My goal: I have some matrixes for transformation vertexes with 0;0-1;1 coordinates to strict regions. There is only one thing, what I need to do - set matrix before drawing. So my call of drawItems-function is like: (pseudo-code) adjustViewMatrixes_andSomethingElse(items.position_of_the_region_there_it_should_be_drawn, items.sizes_of_region_to_draw); setItemsMatrix(); drawItems(); //the same function with vertex coordinates 0;0->1;1, //but it draws in other coordinates, //because I have just set the matrix for region I know only some people will understand me, so there is a picture with regions which I need to make. Every region has 0;0 - 1;1 inner coordinates.

  Read the article

• Added splash screen code to my package

  - by Youssef

  Please i need support to added splash screen code to my package /* * T24_Transformer_FormView.java */ package t24_transformer_form; import org.jdesktop.application.Action; import org.jdesktop.application.ResourceMap; import org.jdesktop.application.SingleFrameApplication; import org.jdesktop.application.FrameView; import org.jdesktop.application.TaskMonitor; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import javax.swing.filechooser.FileNameExtensionFilter; import javax.swing.filechooser.FileFilter; // old T24 Transformer imports import java.io.File; import java.io.FileWriter; import java.io.StringWriter; import java.text.SimpleDateFormat; import java.util.ArrayList; import java.util.Date; import java.util.HashMap; import java.util.Iterator; //import java.util.Properties; import java.util.StringTokenizer; import javax.swing.; import javax.xml.parsers.DocumentBuilder; import javax.xml.parsers.DocumentBuilderFactory; import javax.xml.transform.Result; import javax.xml.transform.Source; import javax.xml.transform.Transformer; import javax.xml.transform.TransformerFactory; import javax.xml.transform.dom.DOMSource; import javax.xml.transform.stream.StreamResult; import org.apache.log4j.Logger; import org.apache.log4j.PropertyConfigurator; import org.w3c.dom.Document; import org.w3c.dom.DocumentFragment; import org.w3c.dom.Element; import org.w3c.dom.Node; import org.w3c.dom.NodeList; import com.ejada.alinma.edh.xsdtransform.util.ConfigKeys; import com.ejada.alinma.edh.xsdtransform.util.XSDElement; import com.sun.org.apache.xml.internal.serialize.OutputFormat; import com.sun.org.apache.xml.internal.serialize.XMLSerializer; /* * The application's main frame. */ public class T24_Transformer_FormView extends FrameView { /**} * static holders for application-level utilities * { */ //private static Properties appProps; private static Logger appLogger; /** * */ private StringBuffer columnsCSV = null; private ArrayList<String> singleValueTableColumns = null; private HashMap<String, String> multiValueTablesSQL = null; private HashMap<Object, HashMap<String, Object>> groupAttrs = null; private ArrayList<XSDElement> xsdElementsList = null; /** * initialization */ private void init() /*throws Exception*/ { // init the properties object //FileReader in = new FileReader(appConfigPropsPath); //appProps.load(in); // log4j.properties constant String PROP_LOG4J_CONFIG_FILE = "log4j.properties"; // init the logger if ((PROP_LOG4J_CONFIG_FILE != null) && (!PROP_LOG4J_CONFIG_FILE.equals(""))) { PropertyConfigurator.configure(PROP_LOG4J_CONFIG_FILE); if (appLogger == null) { appLogger = Logger.getLogger(T24_Transformer_FormView.class.getName()); } appLogger.info("Application initialization successful."); } columnsCSV = new StringBuffer(ConfigKeys.FIELD_TAG + "," + ConfigKeys.FIELD_NUMBER + "," + ConfigKeys.FIELD_DATA_TYPE + "," + ConfigKeys.FIELD_FMT + "," + ConfigKeys.FIELD_LEN + "," + ConfigKeys.FIELD_INPUT_LEN + "," + ConfigKeys.FIELD_GROUP_NUMBER + "," + ConfigKeys.FIELD_MV_GROUP_NUMBER + "," + ConfigKeys.FIELD_SHORT_NAME + "," + ConfigKeys.FIELD_NAME + "," + ConfigKeys.FIELD_COLUMN_NAME + "," + ConfigKeys.FIELD_GROUP_NAME + "," + ConfigKeys.FIELD_MV_GROUP_NAME + "," + ConfigKeys.FIELD_JUSTIFICATION + "," + ConfigKeys.FIELD_TYPE + "," + ConfigKeys.FIELD_SINGLE_OR_MULTI + System.getProperty("line.separator")); singleValueTableColumns = new ArrayList<String>(); singleValueTableColumns.add(ConfigKeys.COLUMN_XPK_ROW + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_NUMERIC); multiValueTablesSQL = new HashMap<String, String>(); groupAttrs = new HashMap<Object, HashMap<String, Object>>(); xsdElementsList = new ArrayList<XSDElement>(); } /** * initialize the <code>DocumentBuilder</code> and read the XSD file * * @param docPath * @return the <code>Document</code> object representing the read XSD file */ private Document retrieveDoc(String docPath) { Document xsdDoc = null; File file = new File(docPath); try { DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder(); xsdDoc = builder.parse(file); } catch (Exception e) { appLogger.error(e.getMessage()); } return xsdDoc; } /** * perform the iteration/modification on the document * iterate to the level which contains all the elements (Single-Value, and Groups) and start processing each * * @param xsdDoc * @return */ private Document processDoc(Document xsdDoc) { ArrayList<Object> newElementsList = new ArrayList<Object>(); HashMap<String, Object> docAttrMap = new HashMap<String, Object>(); Element sequenceElement = null; Element schemaElement = null; // get document's root element NodeList nodes = xsdDoc.getChildNodes(); for (int i = 0; i < nodes.getLength(); i++) { if (ConfigKeys.TAG_SCHEMA.equals(nodes.item(i).getNodeName())) { schemaElement = (Element) nodes.item(i); break; } } // process the document (change single-value elements, collect list of new elements to be added) for (int i1 = 0; i1 < schemaElement.getChildNodes().getLength(); i1++) { Node childLevel1 = (Node) schemaElement.getChildNodes().item(i1); // <ComplexType> element if (childLevel1.getNodeName().equals(ConfigKeys.TAG_COMPLEX_TYPE)) { // first, get the main attributes and put it in the csv file for (int i6 = 0; i6 < childLevel1.getChildNodes().getLength(); i6++) { Node child6 = childLevel1.getChildNodes().item(i6); if (ConfigKeys.TAG_ATTRIBUTE.equals(child6.getNodeName())) { if (child6.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { String attrName = child6.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).getNodeValue(); if (((Element) child6).getElementsByTagName(ConfigKeys.TAG_SIMPLE_TYPE).getLength() != 0) { Node simpleTypeElement = ((Element) child6).getElementsByTagName(ConfigKeys.TAG_SIMPLE_TYPE) .item(0); if (((Element) simpleTypeElement).getElementsByTagName(ConfigKeys.TAG_RESTRICTION).getLength() != 0) { Node restrictionElement = ((Element) simpleTypeElement).getElementsByTagName( ConfigKeys.TAG_RESTRICTION).item(0); if (((Element) restrictionElement).getElementsByTagName(ConfigKeys.TAG_MAX_LENGTH).getLength() != 0) { Node maxLengthElement = ((Element) restrictionElement).getElementsByTagName( ConfigKeys.TAG_MAX_LENGTH).item(0); HashMap<String, String> elementProperties = new HashMap<String, String>(); elementProperties.put(ConfigKeys.FIELD_TAG, attrName); elementProperties.put(ConfigKeys.FIELD_NUMBER, "0"); elementProperties.put(ConfigKeys.FIELD_DATA_TYPE, ConfigKeys.DATA_TYPE_XSD_STRING); elementProperties.put(ConfigKeys.FIELD_FMT, ""); elementProperties.put(ConfigKeys.FIELD_NAME, attrName); elementProperties.put(ConfigKeys.FIELD_SHORT_NAME, attrName); elementProperties.put(ConfigKeys.FIELD_COLUMN_NAME, attrName); elementProperties.put(ConfigKeys.FIELD_SINGLE_OR_MULTI, "S"); elementProperties.put(ConfigKeys.FIELD_LEN, maxLengthElement.getAttributes().getNamedItem( ConfigKeys.ATTR_VALUE).getNodeValue()); elementProperties.put(ConfigKeys.FIELD_INPUT_LEN, maxLengthElement.getAttributes() .getNamedItem(ConfigKeys.ATTR_VALUE).getNodeValue()); constructElementRow(elementProperties); // add the attribute as a column in the single-value table singleValueTableColumns.add(attrName + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_STRING + ConfigKeys.DELIMITER_COLUMN_TYPE + maxLengthElement.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE).getNodeValue()); // add the attribute as an element in the elements list addToElementsList(attrName, attrName); appLogger.debug("added attribute: " + attrName); } } } } } } // now, loop on the elements and process them for (int i2 = 0; i2 < childLevel1.getChildNodes().getLength(); i2++) { Node childLevel2 = (Node) childLevel1.getChildNodes().item(i2); // <Sequence> element if (childLevel2.getNodeName().equals(ConfigKeys.TAG_SEQUENCE)) { sequenceElement = (Element) childLevel2; for (int i3 = 0; i3 < childLevel2.getChildNodes().getLength(); i3++) { Node childLevel3 = (Node) childLevel2.getChildNodes().item(i3); // <Element> element if (childLevel3.getNodeName().equals(ConfigKeys.TAG_ELEMENT)) { // check if single element or group if (isGroup(childLevel3)) { processGroup(childLevel3, true, null, null, docAttrMap, xsdDoc, newElementsList); // insert a new comment node with the contents of the group tag sequenceElement.insertBefore(xsdDoc.createComment(serialize(childLevel3)), childLevel3); // remove the group tag sequenceElement.removeChild(childLevel3); } else { processElement(childLevel3); } } } } } } } // add new elements // this step should be after finishing processing the whole document. when you add new elements to the document // while you are working on it, those new elements will be included in the processing. We don't need that! for (int i = 0; i < newElementsList.size(); i++) { sequenceElement.appendChild((Element) newElementsList.get(i)); } // write the new required attributes to the schema element Iterator<String> attrIter = docAttrMap.keySet().iterator(); while(attrIter.hasNext()) { Element attr = (Element) docAttrMap.get(attrIter.next()); Element newAttrElement = xsdDoc.createElement(ConfigKeys.TAG_ATTRIBUTE); appLogger.debug("appending attr. [" + attr.getAttribute(ConfigKeys.ATTR_NAME) + "]..."); newAttrElement.setAttribute(ConfigKeys.ATTR_NAME, attr.getAttribute(ConfigKeys.ATTR_NAME)); newAttrElement.setAttribute(ConfigKeys.ATTR_TYPE, attr.getAttribute(ConfigKeys.ATTR_TYPE)); schemaElement.appendChild(newAttrElement); } return xsdDoc; } /** * add a new <code>XSDElement</code> with the given <code>name</code> and <code>businessName</code> to * the elements list * * @param name * @param businessName */ private void addToElementsList(String name, String businessName) { xsdElementsList.add(new XSDElement(name, businessName)); } /** * add the given <code>XSDElement</code> to the elements list * * @param element */ private void addToElementsList(XSDElement element) { xsdElementsList.add(element); } /** * check if the <code>element</code> sent is single-value element or group * element. the comparison depends on the children of the element. if found one of type * <code>ComplexType</code> then it's a group element, and if of type * <code>SimpleType</code> then it's a single-value element * * @param element * @return <code>true</code> if the element is a group element, * <code>false</code> otherwise */ private boolean isGroup(Node element) { for (int i = 0; i < element.getChildNodes().getLength(); i++) { Node child = (Node) element.getChildNodes().item(i); if (child.getNodeName().equals(ConfigKeys.TAG_COMPLEX_TYPE)) { // found a ComplexType child (Group element) return true; } else if (child.getNodeName().equals(ConfigKeys.TAG_SIMPLE_TYPE)) { // found a SimpleType child (Single-Value element) return false; } } return false; /* String attrName = null; if (element.getAttributes() != null) { Node attribute = element.getAttributes().getNamedItem(XSDTransformer.ATTR_NAME); if (attribute != null) { attrName = attribute.getNodeValue(); } } if (attrName.startsWith("g")) { // group element return true; } else { // single element return false; } */ } /** * process a group element. recursively, process groups till no more group elements are found * * @param element * @param isFirstLevelGroup * @param attrMap * @param docAttrMap * @param xsdDoc * @param newElementsList */ private void processGroup(Node element, boolean isFirstLevelGroup, Node parentGroup, XSDElement parentGroupElement, HashMap<String, Object> docAttrMap, Document xsdDoc, ArrayList<Object> newElementsList) { String elementName = null; HashMap<String, Object> groupAttrMap = new HashMap<String, Object>(); HashMap<String, Object> parentGroupAttrMap = new HashMap<String, Object>(); XSDElement groupElement = null; if (element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { elementName = element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).getNodeValue(); } appLogger.debug("processing group [" + elementName + "]..."); groupElement = new XSDElement(elementName, elementName); // get the attributes if a non-first-level-group // attributes are: groups's own attributes + parent group's attributes if (!isFirstLevelGroup) { // get the current element (group) attributes for (int i1 = 0; i1 < element.getChildNodes().getLength(); i1++) { if (ConfigKeys.TAG_COMPLEX_TYPE.equals(element.getChildNodes().item(i1).getNodeName())) { Node complexTypeNode = element.getChildNodes().item(i1); for (int i2 = 0; i2 < complexTypeNode.getChildNodes().getLength(); i2++) { if (ConfigKeys.TAG_ATTRIBUTE.equals(complexTypeNode.getChildNodes().item(i2).getNodeName())) { appLogger.debug("add group attr: " + ((Element) complexTypeNode.getChildNodes().item(i2)).getAttribute(ConfigKeys.ATTR_NAME)); groupAttrMap.put(((Element) complexTypeNode.getChildNodes().item(i2)).getAttribute(ConfigKeys.ATTR_NAME), complexTypeNode.getChildNodes().item(i2)); docAttrMap.put(((Element) complexTypeNode.getChildNodes().item(i2)).getAttribute(ConfigKeys.ATTR_NAME), complexTypeNode.getChildNodes().item(i2)); } } } } // now, get the parent's attributes parentGroupAttrMap = groupAttrs.get(parentGroup); if (parentGroupAttrMap != null) { Iterator<String> iter = parentGroupAttrMap.keySet().iterator(); while (iter.hasNext()) { String attrName = iter.next(); groupAttrMap.put(attrName, parentGroupAttrMap.get(attrName)); } } // add the attributes to the group element that will be added to the elements list Iterator<String> itr = groupAttrMap.keySet().iterator(); while(itr.hasNext()) { groupElement.addAttribute(itr.next()); } // put the attributes in the attributes map groupAttrs.put(element, groupAttrMap); } for (int i = 0; i < element.getChildNodes().getLength(); i++) { Node childLevel1 = (Node) element.getChildNodes().item(i); if (childLevel1.getNodeName().equals(ConfigKeys.TAG_COMPLEX_TYPE)) { for (int j = 0; j < childLevel1.getChildNodes().getLength(); j++) { Node childLevel2 = (Node) childLevel1.getChildNodes().item(j); if (childLevel2.getNodeName().equals(ConfigKeys.TAG_SEQUENCE)) { for (int k = 0; k < childLevel2.getChildNodes().getLength(); k++) { Node childLevel3 = (Node) childLevel2.getChildNodes().item(k); if (childLevel3.getNodeName().equals(ConfigKeys.TAG_ELEMENT)) { // check if single element or group if (isGroup(childLevel3)) { // another group element.. // unfortunately, a recursion is // needed here!!! :-( processGroup(childLevel3, false, element, groupElement, docAttrMap, xsdDoc, newElementsList); } else { // reached a single-value element.. copy it under the // main sequence and apply the name<>shorname replacement processGroupElement(childLevel3, element, groupElement, isFirstLevelGroup, xsdDoc, newElementsList); } } } } } } } if (isFirstLevelGroup) { addToElementsList(groupElement); } else { parentGroupElement.addChild(groupElement); } appLogger.debug("finished processing group [" + elementName + "]."); } /** * process the sent <code>element</code> to extract/modify required * information: * 1. replace the <code>name</code> attribute with the <code>shortname</code>. * * @param element */ private void processElement(Node element) { String fieldShortName = null; String fieldColumnName = null; String fieldDataType = null; String fieldFormat = null; String fieldInputLength = null; String elementName = null; HashMap<String, String> elementProperties = new HashMap<String, String>(); if (element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { elementName = element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).getNodeValue(); } appLogger.debug("processing element [" + elementName + "]..."); for (int i = 0; i < element.getChildNodes().getLength(); i++) { Node childLevel1 = (Node) element.getChildNodes().item(i); if (childLevel1.getNodeName().equals(ConfigKeys.TAG_ANNOTATION)) { for (int j = 0; j < childLevel1.getChildNodes().getLength(); j++) { Node childLevel2 = (Node) childLevel1.getChildNodes().item(j); if (childLevel2.getNodeName().equals(ConfigKeys.TAG_APP_INFO)) { for (int k = 0; k < childLevel2.getChildNodes().getLength(); k++) { Node childLevel3 = (Node) childLevel2.getChildNodes().item(k); if (childLevel3.getNodeName().equals(ConfigKeys.TAG_HAS_PROPERTY)) { if (childLevel3.getAttributes() != null) { String attrName = null; Node attribute = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME); if (attribute != null) { attrName = attribute.getNodeValue(); elementProperties.put(attrName, childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue()); if (attrName.equals(ConfigKeys.FIELD_SHORT_NAME)) { fieldShortName = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_COLUMN_NAME)) { fieldColumnName = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_DATA_TYPE)) { fieldDataType = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_FMT)) { fieldFormat = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_INPUT_LEN)) { fieldInputLength = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } } } } } } } } } // replace the name attribute with the shortname if (element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).setNodeValue(fieldShortName); } elementProperties.put(ConfigKeys.FIELD_SINGLE_OR_MULTI, "S"); constructElementRow(elementProperties); singleValueTableColumns.add(fieldShortName + ConfigKeys.DELIMITER_COLUMN_TYPE + fieldDataType + fieldFormat + ConfigKeys.DELIMITER_COLUMN_TYPE + fieldInputLength); // add the element to elements list addToElementsList(fieldShortName, fieldColumnName); appLogger.debug("finished processing element [" + elementName + "]."); } /** * process the sent <code>element</code> to extract/modify required * information: * 1. copy the element under the main sequence * 2. replace the <code>name</code> attribute with the <code>shortname</code>. * 3. add the attributes of the parent groups (if non-first-level-group) * * @param element */ private void processGroupElement(Node element, Node parentGroup, XSDElement parentGroupElement, boolean isFirstLevelGroup, Document xsdDoc, ArrayList<Object> newElementsList) { String fieldShortName = null; String fieldColumnName = null; String fieldDataType = null; String fieldFormat = null; String fieldInputLength = null; String elementName = null; Element newElement = null; HashMap<String, String> elementProperties = new HashMap<String, String>(); ArrayList<String> tableColumns = new ArrayList<String>(); HashMap<String, Object> groupAttrMap = null; if (element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { elementName = element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).getNodeValue(); } appLogger.debug("processing element [" + elementName + "]..."); // 1. copy the element newElement = (Element) element.cloneNode(true); newElement.setAttribute(ConfigKeys.ATTR_MAX_OCCURS, "unbounded"); // 2. if non-first-level-group, replace the element's SimpleType tag with a ComplexType tag if (!isFirstLevelGroup) { if (((Element) newElement).getElementsByTagName(ConfigKeys.TAG_SIMPLE_TYPE).getLength() != 0) { // there should be only one tag of SimpleType Node simpleTypeNode = ((Element) newElement).getElementsByTagName(ConfigKeys.TAG_SIMPLE_TYPE).item(0); // create the new ComplexType element Element complexTypeNode = xsdDoc.createElement(ConfigKeys.TAG_COMPLEX_TYPE); complexTypeNode.setAttribute(ConfigKeys.ATTR_MIXED, "true"); // get the list of attributes for the parent group groupAttrMap = groupAttrs.get(parentGroup); Iterator<String> attrIter = groupAttrMap.keySet().iterator(); while(attrIter.hasNext()) { Element attr = (Element) groupAttrMap.get(attrIter.next()); Element newAttrElement = xsdDoc.createElement(ConfigKeys.TAG_ATTRIBUTE); appLogger.debug("adding attr. [" + attr.getAttribute(ConfigKeys.ATTR_NAME) + "]..."); newAttrElement.setAttribute(ConfigKeys.ATTR_REF, attr.getAttribute(ConfigKeys.ATTR_NAME)); newAttrElement.setAttribute(ConfigKeys.ATTR_USE, "optional"); complexTypeNode.appendChild(newAttrElement); } // replace the old SimpleType node with the new ComplexType node newElement.replaceChild(complexTypeNode, simpleTypeNode); } } // 3. replace the name with the shortname in the new element for (int i = 0; i < newElement.getChildNodes().getLength(); i++) { Node childLevel1 = (Node) newElement.getChildNodes().item(i); if (childLevel1.getNodeName().equals(ConfigKeys.TAG_ANNOTATION)) { for (int j = 0; j < childLevel1.getChildNodes().getLength(); j++) { Node childLevel2 = (Node) childLevel1.getChildNodes().item(j); if (childLevel2.getNodeName().equals(ConfigKeys.TAG_APP_INFO)) { for (int k = 0; k < childLevel2.getChildNodes().getLength(); k++) { Node childLevel3 = (Node) childLevel2.getChildNodes().item(k); if (childLevel3.getNodeName().equals(ConfigKeys.TAG_HAS_PROPERTY)) { if (childLevel3.getAttributes() != null) { String attrName = null; Node attribute = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME); if (attribute != null) { attrName = attribute.getNodeValue(); elementProperties.put(attrName, childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue()); if (attrName.equals(ConfigKeys.FIELD_SHORT_NAME)) { fieldShortName = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_COLUMN_NAME)) { fieldColumnName = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_DATA_TYPE)) { fieldDataType = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_FMT)) { fieldFormat = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_INPUT_LEN)) { fieldInputLength = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } } } } } } } } } if (newElement.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { newElement.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).setNodeValue(fieldShortName); } // 4. save the new element to be added to the sequence list newElementsList.add(newElement); elementProperties.put(ConfigKeys.FIELD_SINGLE_OR_MULTI, "M"); constructElementRow(elementProperties); // create the MULTI-VALUE table // 0. Primary Key tableColumns.add(ConfigKeys.COLUMN_XPK_ROW + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_STRING + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.COLUMN_XPK_ROW_LENGTH); // 1. foreign key tableColumns.add(ConfigKeys.COLUMN_FK_ROW + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_NUMERIC); // 2. field value tableColumns.add(fieldShortName + ConfigKeys.DELIMITER_COLUMN_TYPE + fieldDataType + fieldFormat + ConfigKeys.DELIMITER_COLUMN_TYPE + fieldInputLength); // 3. attributes if (groupAttrMap != null) { Iterator<String> attrIter = groupAttrMap.keySet().iterator(); while (attrIter.hasNext()) { Element attr = (Element) groupAttrMap.get(attrIter.next()); tableColumns.add(attr.getAttribute(ConfigKeys.ATTR_NAME) + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_NUMERIC); } } multiValueTablesSQL.put(sub_table_prefix.getText() + fieldShortName, constructMultiValueTableSQL( sub_table_prefix.getText() + fieldShortName, tableColumns)); // add the element to it's parent group children parentGroupElement.addChild(new XSDElement(fieldShortName, fieldColumnName)); appLogger.debug("finished processing element [" + elementName + "]."); } /** * write resulted files * * @param xsdDoc * @param docPath */ private void writeResults(Document xsdDoc, String resultsDir, String newXSDFileName, String csvFileName) { String rsDir = resultsDir + File.separator + new SimpleDateFormat("yyyyMMdd-HHmm").format(new Date()); try { File resultsDirFile = new File(rsDir); if (!resultsDirFile.exists()) { resultsDirFile.mkdirs(); } // write the XSD doc appLogger.info("writing the transformed XSD..."); Source source = new DOMSource(xsdDoc); Result result = new StreamResult(rsDir + File.separator + newXSDFileName); Transformer xformer = TransformerFactory.newInstance().newTransformer(); // xformer.setOutputProperty("indent", "yes"); xformer.transform(source, result); appLogger.info("finished writing the transformed XSD."); // write the CSV columns file appLogger.info("writing the CSV file..."); FileWriter csvWriter = new FileWriter(rsDir + File.separator + csvFileName); csvWriter.write(columnsCSV.toString()); csvWriter.close(); appLogger.info("finished writing the CSV file."); // write the master single-value table appLogger.info("writing the creation script for master table (single-values)..."); FileWriter masterTableWriter = new FileWriter(rsDir + File.separator + main_edh_table_name.getText() + ".sql"); masterTableWriter.write(constructSingleValueTableSQL(main_edh_table_name.getText(), singleValueTableColumns)); masterTableWriter.close(); appLogger.info("finished writing the creation script for master table (single-values)."); // write the multi-value tables sql appLogger.info("writing the creation script for slave tables (multi-values)..."); Iterator<String> iter = multiValueTablesSQL.keySet().iterator(); while (iter.hasNext()) { String tableName = iter.next(); String sql = multiValueTablesSQL.get(tableName); FileWriter tableSQLWriter = new FileWriter(rsDir + File.separator + tableName + ".sql"); tableSQLWriter.write(sql); tableSQLWriter.close(); } appLogger.info("finished writing the creation script for slave tables (multi-values)."); // write the single-value view appLogger.info("writing the creation script for single-value selection view..."); FileWriter singleValueViewWriter = new FileWriter(rsDir + File.separator + view_name_single.getText() + ".sql"); singleValueViewWriter.write(constructViewSQL(ConfigKeys.SQL_VIEW_SINGLE)); singleValueViewWriter.close(); appLogger.info("finished writing the creation script for single-value selection view."); // debug for (int i = 0; i < xsdElementsList.size(); i++) { getMultiView(xsdElementsList.get(i)); /*// if (xsdElementsList.get(i).getAllDescendants() != null) { // for (int j = 0; j < xsdElementsList.get(i).getAllDescendants().size(); j++) { // appLogger.debug(main_edh_table_name.getText() + "." + ConfigKeys.COLUMN_XPK_ROW // + "=" + xsdElementsList.get(i).getAllDescendants().get(j).getName() + "." + ConfigKeys.COLUMN_FK_ROW); // } // } */ } } catch (Exception e) { appLogger.error(e.getMessage()); } } private String getMultiView(XSDElement element)

  Read the article

• Regular Expressions Cookbook Is in The Money—Win a Copy

  - by Jan Goyvaerts

  Regular Expressions Cookbook has sold enough copies to pay for the advance royalty Steven and I received. To celebrate we're giving away five copies of the book.

  Read the article

• Oracle Coherence, Split-Brain and Recovery Protocols In Detail

  - by Ricardo Ferreira

  This article provides a high level conceptual overview of Split-Brain scenarios in distributed systems. It will focus on a specific example of cluster communication failure and recovery in Oracle Coherence. This includes a discussion on the witness protocol (used to remove failed cluster members) and the panic protocol (used to resolve Split-Brain scenarios). Note that the removal of cluster members does not necessarily indicate a Split-Brain condition. Oracle Coherence does not (and cannot) detect a Split-Brain as it occurs, the condition is only detected when cluster members that previously lost contact with each other regain contact. Cluster Topology and Configuration In order to create an good didactic for the article, let's assume a cluster topology and configuration. In this example we have a six member cluster, consisting of one JVM on each physical machine. The member IDs are as follows: Member ID  IP Address  1  10.149.155.76  2  10.149.155.77  3  10.149.155.236  4  10.149.155.75  5  10.149.155.79  6  10.149.155.78 Members 1, 2, and 3 are connected to a switch, and members 4, 5, and 6 are connected to a second switch. There is a link between the two switches, which provides network connectivity between all of the machines. Member 1 is the first member to join this cluster, thus making it the senior member. Member 6 is the last member to join this cluster. Here is a log snippet from Member 6 showing the complete member set: 2010-02-26 15:27:57.390/3.062 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=6): Started DefaultCacheServer... SafeCluster: Name=cluster:0xDDEB Group{Address=224.3.5.3, Port=35465, TTL=4} MasterMemberSet ( ThisMember=Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) OldestMember=Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ActualMemberSet=MemberSet(Size=6, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) RecycleMillis=120000 RecycleSet=MemberSet(Size=0, BitSetCount=0 ) ) At approximately 15:30, the connection between the two switches is severed: Thirty seconds later (the default packet timeout in development mode) the logs indicate communication failures across the cluster. In this example, the communication failure was caused by a network failure. In a production setting, this type of communication failure can have many root causes, including (but not limited to) network failures, excessive GC, high CPU utilization, swapping/virtual memory, and exceeding maximum network bandwidth. In addition, this type of failure is not necessarily indicative of a split brain. Any communication failure will be logged in this fashion. Member 2 logs a communication failure with Member 5: 2010-02-26 15:30:32.638/196.928 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=5, Timestamp=2010-02-26 15:27:49.095, Address=10.149.155.79:8088, MachineId=1103, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:3229, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) ) The Coherence clustering protocol (TCMP) is a reliable transport mechanism built on UDP. In order for the protocol to be reliable, it requires an acknowledgement (ACK) for each packet delivered. If a packet fails to be acknowledged within the configured timeout period, the Coherence cluster member will log a packet timeout (as seen in the log message above). When this occurs, the cluster member will consult with other members to determine who is at fault for the communication failure. If the witness members agree that the suspect member is at fault, the suspect is removed from the cluster. If the witnesses unanimously disagree, the accuser is removed. This process is known as the witness protocol. Since Member 2 cannot communicate with Member 5, it selects two witnesses (Members 1 and 4) to determine if the communication issue is with Member 5 or with itself (Member 2). However, Member 4 is on the switch that is no longer accessible by Members 1, 2 and 3; thus a packet timeout for member 4 is recorded as well: 2010-02-26 15:30:35.648/199.938 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=2): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) Member 1 has the ability to confirm the departure of member 4, however Member 6 cannot as it is also inaccessible. At the same time, Member 3 sends a request to remove Member 6, which is followed by a report from Member 3 indicating that Member 6 has departed the cluster: 2010-02-26 15:30:35.706/199.996 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft request for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) 2010-02-26 15:30:35.709/199.999 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=2): MemberLeft notification for Member 6 received from Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) The log for Member 3 determines how Member 6 departed the cluster: 2010-02-26 15:30:35.161/191.694 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=3): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ) 2010-02-26 15:30:35.165/191.698 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=3): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) Member(Id=2, Timestamp=2010-02-26 15:27:17.847, Address=10.149.155.77:8088, MachineId=1101, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:296, Role=CoherenceServer) ); removing Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) In this case, Member 3 happened to select two witnesses that it still had connectivity with (Members 1 and 2) thus resulting in a simple decision to remove Member 6. Given the departure of Member 6, Member 2 is left with a single witness to confirm the departure of Member 4: 2010-02-26 15:30:35.713/200.003 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=2): Member departure confirmed by MemberSet(Size=1, BitSetCount=2 Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) ); removing Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) In the meantime, Member 4 logs a missing heartbeat from the senior member. This message is also logged on Members 5 and 6. 2010-02-26 15:30:07.906/150.453 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=PacketListenerN, member=4): Scheduled senior member heartbeat is overdue; rejoining multicast group. Next, Member 4 logs a TcpRing failure with Member 2, thus resulting in the termination of Member 2: 2010-02-26 15:30:21.421/163.968 Oracle Coherence GE 3.5.3/465p2 <D4> (thread=Cluster, member=4): TcpRing: Number of socket exceptions exceeded maximum; last was "java.net.SocketTimeoutException: connect timed out"; removing the member: 2 For quick process termination detection, Oracle Coherence utilizes a feature called TcpRing which is a sparse collection of TCP/IP-based connections between different members in the cluster. Each member in the cluster is connected to at least one other member, which (if at all possible) is running on a different physical box. This connection is not used for any data transfer, only heartbeat communications are sent once a second per each link. If a certain number of exceptions are thrown while trying to re-establish a connection, the member throwing the exceptions is removed from the cluster. Member 5 logs a packet timeout with Member 3 and cites witnesses Members 4 and 6: 2010-02-26 15:30:29.791/165.037 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=PacketPublisher, member=5): Timeout while delivering a packet; requesting the departure confirmation for Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ) 2010-02-26 15:30:29.798/165.044 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=5): Member departure confirmed by MemberSet(Size=2, BitSetCount=2 Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member(Id=6, Timestamp=2010-02-26 15:27:58.635, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) ); removing Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer) Eventually we are left with two distinct clusters consisting of Members 1, 2, 3 and Members 4, 5, 6, respectively. In the latter cluster, Member 4 is promoted to senior member. The connection between the two switches is restored at 15:33. Upon the restoration of the connection, the cluster members immediately receive cluster heartbeats from the two senior members. In the case of Members 1, 2, and 3, the following is logged: 2010-02-26 15:33:14.970/369.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): The member formerly known as Member(Id=4, Timestamp=2010-02-26 15:30:35.341, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. Likewise for Members 4, 5, and 6: 2010-02-26 15:33:14.343/336.890 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=4): The member formerly known as Member(Id=1, Timestamp=2010-02-26 15:30:31.64, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) has been forcefully evicted from the cluster, but continues to emit a cluster heartbeat; henceforth, the member will be shunned and its messages will be ignored. This message indicates that a senior heartbeat is being received from members that were previously removed from the cluster, in other words, something that should not be possible. For this reason, the recipients of these messages will initially ignore them. After several iterations of these messages, the existence of multiple clusters is acknowledged, thus triggering the panic protocol to reconcile this situation. When the presence of more than one cluster (i.e. Split-Brain) is detected by a Coherence member, the panic protocol is invoked in order to resolve the conflicting clusters and consolidate into a single cluster. The protocol consists of the removal of smaller clusters until there is one cluster remaining. In the case of equal size clusters, the one with the older Senior Member will survive. Member 1, being the oldest member, initiates the protocol: 2010-02-26 15:33:45.970/400.066 Oracle Coherence GE 3.5.3/465p2 <Warning> (thread=Cluster, member=1): An existence of a cluster island with senior Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) containing 3 nodes have been detected. Since this Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) is the senior of an older cluster island, the panic protocol is being activated to stop the other island's senior and all junior nodes that belong to it. Member 3 receives the panic: 2010-02-26 15:33:45.803/382.336 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=3): Received panic from senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer) caused by Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer) Member 4, the senior member of the younger cluster, receives the kill message from Member 3: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. In turn, Member 4 requests the departure of its junior members 5 and 6: 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:43.343/349.015 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=6): Received a Kill message from a valid Member(Id=4, Timestamp=2010-02-26 15:27:39.574, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer); stopping cluster service. Once Members 4, 5, and 6 restart, they rejoin the original cluster with senior member 1. The log below is from Member 4. Note that it receives a different member id when it rejoins the cluster. 2010-02-26 15:33:44.921/367.468 Oracle Coherence GE 3.5.3/465p2 <Error> (thread=Cluster, member=4): Received a Kill message from a valid Member(Id=3, Timestamp=2010-02-26 15:27:24.892, Address=10.149.155.236:8088, MachineId=1260, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:32459, Role=CoherenceServer); stopping cluster service. 2010-02-26 15:33:46.921/369.468 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Service Cluster left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:InvocationService, member=4): Service InvocationService left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=OptimisticCache, member=4): Service OptimisticCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=ReplicatedCache, member=4): Service ReplicatedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=DistributedCache, member=4): Service DistributedCache left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Invocation:Management, member=4): Service Management left the cluster 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service Management with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service DistributedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service ReplicatedCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service OptimisticCache with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member 6 left service InvocationService with senior member 5 2010-02-26 15:33:47.046/369.593 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=4): Member(Id=6, Timestamp=2010-02-26 15:33:47.046, Address=10.149.155.78:8088, MachineId=1102, Location=process:228, Role=CoherenceServer) left Cluster with senior member 4 2010-02-26 15:33:49.218/371.765 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=main, member=n/a): Restarting cluster 2010-02-26 15:33:49.421/371.968 Oracle Coherence GE 3.5.3/465p2 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a 2010-02-26 15:33:49.625/372.172 Oracle Coherence GE 3.5.3/465p2 <Info> (thread=Cluster, member=n/a): This Member(Id=5, Timestamp=2010-02-26 15:33:50.499, Address=10.149.155.75:8088, MachineId=1099, Location=process:800, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster "cluster:0xDDEB" with senior Member(Id=1, Timestamp=2010-02-26 15:27:06.931, Address=10.149.155.76:8088, MachineId=1100, Location=site:usdhcp.oraclecorp.com,machine:dhcp-burlington6-4fl-east-10-149,process:511, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=2) Cool isn't it?

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >