Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 56/314 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Linux server failover

  - by Lukasz

  I have two Linux servers (CentOS6) - both are identically configured connected to the same switch with a direct link between them. I only have one external IP that is assigned to eth0 on both servers (connected to the internet switch) with the interface shutdown on server 2. How can I failover to server 2 if server 1 dies - as stated they are linked directly so they can check for availability of each other via ping/tcp/udp. I toyed with Heartbeat but the documentation seems to be non-existent - not sure how to bring up an interface and start some services if the other server dies.

  Read the article

• Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

  - by Mouad

  On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

  Read the article

• How to connect another computer to the router

  - by Call Me Dummy

  I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

  Read the article

• How can I disable the network detection on Windows 7?

  - by Mad Scientist

  I have a computer running Windows 7 that shares some files on the network. This works fine for a while until for some unknown reason the computer decides that it is connected to a new, unknown public network and disables the file sharing capabilites. Nothing physically changes with the computer, it is still connected to the same network via ethernet cable. But it does misidentify the network every other day, just plugging out the ethernet cable and putting it back in leads Windows to correctly identify the work network and enabling the share again. Is there some way to stop Windows from trying to identify the network automatically, and just tell it that the network on that computer will never change?

  Read the article

• Program opens on disconnected and invisible monitor [closed]

  - by FiveO

  Possible Duplicate: Recover Windows Opening Off Screen? I'm working with a HP Elitebook 8460p with Windows 8 using always 2 Monitors connected. And some Programs I'm always opening on the second screen (which windows does automatically). But now the problem: When the screens aren't connected (when I'm at home), some programs still open on the second screen (which does not exist anymore) and it's just not possible to move them to the main (only!) screen! Does some one knows a solution for the problem - already bringing back the windows to the main screen would be enough. Thanks

  Read the article

• What is the mount point for Windows share on Ubuntu 9.10?

  - by AMS949

  I am new to Ubuntu so please be gentle! I am taking the plunge from Windows!! I connected to a Windows share (using Connect to Server... menu) and I can access it on Gnome just fine. However, I don't know how I can access it in console, or in any other program that requires the path, when it's already connected on Gnome. What's the mount point for that? I tried the mount command but it does not show up.

  Read the article

• Why can't we reach some (but not all) external web service via VPN connection?

  - by Paul Haldane

  At work (UK university) we use a set of Windows servers running WS2008R2 and RRAS which offer VPN service to students in our accommodation. We do this to associate the network connections with individuals. Before they've connected to the VPN all they can talk to is the stuff thats needed to setup the VPN and a local web site with documentation on how to connect. Medium term we'll probably replace this but it's what we're using at the moment. VPN on the 2008 servers allocates client a private (10.x) address. Access to external sites is through NAT on the campus routers (same as any other directly connected client on a private address). Non-VPN connections aren't seeing this problem. Older servers run WS 2003 and ISA2004. That setup works but has become unreliable under load. Big difference there was that we were allocating non-RFC1918 addresses to the clients (so no NAT required). Behaviour we're seeing is that once connected to the VPN, clients can reach local web sites (that is sites on the campus network) but only some external sites. It seems (but this may be chance) that the sites we can reach are Google ones (including YouTube). We certainly have trouble reaching Microsoft's Office 365 service (which is a pain because that's where mail for most of our students is). One odd bit of behaviour is that clients can fetch (using wget on a Windows 7 client) http://www.oracle.com/ (which gets a 301 redirect) but hangs when asked to fetch http://www.oracle.com/index.html (which is what the first URL redirects to). Access works reliably if we configure clients to use our local web proxies (Squid). My gut tells me that this is likely to be something in the chain dropping replies either based on HTTP inspection or the IP address in the reply. However I'm puzzled about why we're seeing this with the VPN clients. Plan for tomorrow (when I'm back in the office) is to setup a web server on external connection so that we can monitor behaviour at both ends of the conversation (hoping that the problem manifests itself with our test server). Any suggestions for things we should be looking at?

  Read the article

• RDP windows key jamming

  - by VBwhatnow

  There is a known bug in RDP; if you lock the screen while connected to a computer the computer you are connected to will have its windows key jammed. There are a few work arounds that involve hammering the windows key and re-locking the screen but this isn't a bug I want to put up with anymore. Microsoft has said they wont fix this bug because it's XP specific and they are only working on security bugs now because XP is at end of life. Is there any way I can fix this or am I just going to have to find an alternative remote desktop software.

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by Mike Brion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

• Internet sharing over LAN on Windows Server 2012

  - by USER

  I have a DSL modem connected to a server (ON NIC1) running Windows Server 2012 and 7 computers (running Windows 7 32-Bit) connected to a server though a network switch (ON NIC2). I shared the internet connection from the server through DHCP so I am able to access the internet from those 7 computers, but I am unable to: Access Google.com Activate Windows Update Windows An error is arising that says UNABLE TO ACTIVATE WINDOWS Activation Error Code: 0x80072EE2 Firewall and Anti-Virus are off on both the Server and the Clients. Is there is any additional setting that I want to do?

  Read the article

• How to get headphones and speakers working at the same time?

  - by Borek

  I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• ASUS WL-500gP v2 network between two local machines

  - by Epsiloncool

  I have two windows XP machines in my home networks, connected with ASUS WL-500gp V2 which also used as internet router. Problem is: while I have both computers normally goes to internet (used DHCP, static routes is ON, routing table is empty, operation mode is Home Gateway). I see both computers listed on the Network Neighborhood on 1st computer (wired to router), can enter to my own computer, but can not enter to other. I see only one computer (2nd) on the Network Neighborhood on 2nd computer (connected thru Wi-Fi), can enter to itself, getting error when trying to enter 1st computer address in address line (like \My1stComp). What is the problem? I totally crazy founding problem about 3 months.

  Read the article

• Inbox should not contain any calendar appointment

  - by cotablise

  Imagine two users A and B.User B has editor rights on mailbox A via delegation. Delegation settings: User A should not receive any invitation (calendar appointments). All should be routed to user B. It works fine when you are connected to mailbox via Outlook. Problem is that sometimes it does not work when user is connected via his iPhone (he receives calendar appointments in inbox). I know that this feature for MS products and therefore it works on MS Outlook. But user A told me that it worked in the past also on iPhone with user C. Problem is that nowadays it does not work perfectly for user B. Do you have any suggestion please? Thank you in advance.

  Read the article

• Wifi and eth behavior

  - by r00ster

  I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

  Read the article

• Allow access only to one website

  - by Alex

  Hey. I'd like to allow access on a computer connected directly to the internet to one website ONLY. The solution of IE's "Content advisor" or firefox's "FoxFilter" isn't good enough because it actually downloads the data and just don't display it. I want to block the traffic before the requests are sent. How is it possible? Thanks. Edit: OS is windows xp. The browser can be firefox, iexplorer, chrome... It doesn't matter. The computer is connected directly to the modem.

  Read the article

• Two 24' displayed vertically in Ubuntu

  - by QuinnBaetz

  I just got two 24' inch monitors, and want them to display vertically side by side. I got one to but can't figure out the command to get them both vertical and displaying. xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 3840 1200 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection xrandr: Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 3840 x 1200 VGA connected 1920x1200+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.0 60.0 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 TMDS-1 connected 1920x1200+1920+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.0 60.0 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 any clue on the command to make them vertical? Thanks!

  Read the article

• Why am I having trouble viewing HTTPS websites only using Chrome only on my employer's network?

  - by user1742777

  I'm using Google Chrome on my new MacBook Pro that has been provided to me by my employer. Many of the HTTPS sites I visit do not work when I visit them using Google Crome while I am connected to my employer's network. Example: www.facebook.com These same sites work perfectly fine if I use a different browser (like Safari) or even with Chrome when my Macbook is connected to my home WiFi network. Chrome reports the error: "The certificate was signed by an unknown authority". See attached screenshots. How can I resolve this problem? I really want to use Chrome. But not having access to numerous important work and outside websites is unacceptable.

  Read the article

• how to design LAN connectivity between private and corporate ?

  - by maruti

  there is a bunch of servers connected to shared storage in a private LAN (10.x.x.x). this privateLAN is managed by a windows server (DHCP, DNS and directory services). how can these hosts be accessed from outside of this privateLAN? Eg. Remote desktop. can the NIC2 on each of the hosts be connected to the other public LAN (compromising speed or security? what are improtant considerations: additional hardware? like switches? routing&DNS software?

  Read the article

• Minimal Lync 2013 Setup

  - by vkapadia

  I would like to install a Lync 2013 server at home. What would be the minimum requirements for it? I've seen the requirements and they seem pretty hefty, just want to know what I need for a basic set up. This will be for up to 5 users. I would like users to be able to connect from outside the network as well. From what I've been able to find, it looks like I'll need 3 servers. A domain controller, a lync front end server, and an edge server (for external connectivity, and it will need 2 network cards). Is that really all necessary? And how would they need to be connected (I've never connected a machine with multiple network cards)? Do they all have to be separate machines, or can I use VMs?

  Read the article

• Disable the status message in the remote desktop window

  - by user44422

  OK I've been searching for about 2 1/2 hours now and can't seem to find an answer. I work with window's remote desktop everyday to connect to clients. My problem is when I have several remote desktop windows open, I can't tell them apart when minimized in the taskbar. Is there a way to disable status of the window. So for example, my remote window at top reads out "Connected to OWNERXX (clientsusername)" I want to disable the CONNECTED TO OWNERXX while keeping the (clientsusername) visible at the top of the window and while it's minimized. Any help is much appreciated.

  Read the article

• Access Domain over Wireless

  - by William

  I have an active directory server and all hard wired clients connect perfectly fine. However any wireless clients do not recognize that they are connected to the domain, despite the dns server being appropriately set to the domain controller for both wired and wireless connections. Also - both wired and wireless clients are on the same subnet. I am using a Verizon food actiontec router. What am I missing? For instance, this is the same computer connected first via an Ethernet cable and second via the wireless.

  Read the article

• Home Wifi: wireless laptop cannot RDC to wired desktop (both windows 7)

  - by James_Smith

  Hi, Both laptop and desktop are connected to same wifi router. desktop is connected through wire and laptop is on wifi. Both Pcs are running windows 7 and can ping each other and are in same workgroup. When I try to RDC my desktop on my laptop, it connects to the desktop and shows the windows credentials screen. An admin user (J) with same password exists on both PCs. But it gives an error "the user name or password is incorrect" However when I RDC the laptop FROM desktop using the above steps..it works perfectly wel! The same credentials issue comes with Shared folders. What am I doing wrong?

  Read the article

• Windows 7 Built-In VPN - How to access network shares, printers, etc.?

  - by mbrion

  After I have successfully connected to a Windows 7 box via the built-in VPN: how do I access shares, shared printers, network appliances, etc.? So, call me bad at googling, but: I can find dozens of articles on "How to Set up a VPN Connection" and "How to connect to a VPN" for Windows 7... but I can't find a single article on how to access resources after connecting. I have a home VPN set up in Windows 7; I was able to connect to it from my friend's Windows 7 machine last night. I expected to be able to UNC into my shares; I also expected to be able to go to "Start Computer" and Click "Network" on the left side, and then see all of the devices on my home network (while the VPN was connected). Am I missing something obvious? How do I make this happen?

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >