Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 58/314 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• no hdmi sound on Ubuntu 12.04 LTS

  - by bart

  i'm very new to ubuntu/linux. I installed Ubuntu 12.04 LTS on my vista laptop (nvidia gpu) in dual boot and with some help of google i'm almost ready to go. The only thing that i can't figure out is how to play sound trough my hdmi connected to my tv. Speakers of the laptop are ok, in te sound settings i can see -hdmi -digital -speaker outputs. The top 2 won't play sound so i googled around, found a bunch of things to try but the only thing succesfull so far was to erase all the drivers from the audio settings and they stayed gone. So finally i re-installed from scratch but still no sound trough hdmi. Re-installed 6times in the last 3 days now so the only thing left for me is reaching out for help/advice about this. How can i play sound on my tv connected with hdmi? I will be glad to give more info if needed cuz this is driving me crazy, thanks for your help in advance ! Bart.

  Read the article

• Cannot re-install Ubuntu 12.04 via USB (USB booting issue)

  - by Mohd Arafat Hossain

  I've read the previous questions related to my same problem regarding the USB not booting issue and have tried everything from what was replied in those post's but still no luck. I will tell you everything I have done so far (If it helps in any way...) 1) Previously I had Windows 7 running on my laptop, where I downloaded the official torrent ISO (i386 desktop) and using Unetbootin I made a bootable USB 2) Restarted the laptop with the USB connected and IT BOOTED, then I installed it on my HDD(Internal) replacing my Windows 7 3) After installing it restarted and I took some time to explore Ubuntu after the log in, then went online and followed some website for the things to do after installing Ubuntu 12.04.....and then there were errors while installing some softwares and plug-ins. The error asked me to check if i was connected to the Internet properly....while I was surfing facebook good as always on an open Firefox. The same error comes when installing Ubuntu one. 4) so I decided to re-install Ubuntu thinking I had done something wrong during the installation (I'm installing from the same USB)...and it didn't boot. I checked the boot priority and it was/is set in USB first (as always). To say in detail what happens is when I restart the USB light flashes at start, later on stops and in the screen the installed Ubuntu 12.04 loads up for me to log in (meaning it's not booting from the USB). By reading you can see that I haven't done much and I honestly didn't even touch the system settings to mess things up. As I have mentioned above I've tried everything in the previous post's in this related topic and it didn't work so I'm hoping for a new solution as a reply. Thanks in advance :) Edited: I wanted to add this I want to clean install instead of solving errors so please give a step by step guide. thanks for any help :)

  Read the article

• Wired Network not working on Ubuntu 11.10 + Strange Behavior with Manual Conf

  - by Mauricio Cruz

  I'm new to Ubuntu - to be honest this is my very first day trying it... and I've already spent hours trying to make my wired connection work. I've been using this wired network with Windows and OSX, and in both systems I also had some trouble trying to connect in the past (and the troubleshooters did their magic and helped me get connected). Today, this is what I got: I'm running Ubuntu 11.10; ifconfig: eth0 Link encap:Ethernet HWaddr 78:2b:cb:c3:bf:8f UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:343 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:70 (70.0 B) TX bytes:63273 (63.2 KB) Interrupt:20 Memory:e2e00000-e2e20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1859 errors:0 dropped:0 overruns:0 frame:0 TX packets:1859 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:149368 (149.3 KB) TX bytes:149368 (149.3 KB) wlan0 Link encap:Ethernet HWaddr 10:0b:a9:82:55:c0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:15484 errors:0 dropped:0 overruns:0 frame:0 TX packets:16871 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:12048377 (12.0 MB) TX bytes:2677679 (2.6 MB) I also have some information from Windows ipconfig /all that I ran at my friend's machine Ipv6 Address: <address> preferential Ipv4 Address: 172.26.65.23 <preferential> Netmask: 255.255.254.0 Default Gateway: 172.26.64.1 DHCP Server : <address> DNS Servers : <address> DNS Suffix : <suffix> The weird thing is that I've tried to configure everything manually, using "Network Connections". When I add everything inside IPv4 Settings, the connection is finally successful, but only for 4~5 seconds before getting disconnected again... Update:I just changed the Connection Method to "Local-Link Only", and the same described above happens: At first, it says "Connection Stablished", but after a few seconds, the wired network gets disconnected. I hope someone can help me get connected! Thanks!

  Read the article

• Setting up shared connection

  - by Calvin Froedge

  I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

  Read the article

• Getting my brother MFC-J825DW working as a network scanner

  - by AntonChanning

  I've been attempting to set up my new brother multi-function device to work as a printer and scanner using the following steps. It is connected to the network as a LAN device, not directly connected to my ubuntu machine. Downloaded the lpr driver and cupswrapper driver from Brother support. (Select the deb packages, not the rpms). Followed the instructions to install the lpr driver. Followed the instructions to install the cupswrapper driver. After this point I was able to successfully perform a test print, so the printer part is working. So far I haven't had much luck getting the scanner working. This is what I've tried: Downloaded the brscan4 and scan-key-tool deb packages from brother support. Followed the instructions for installing the scanner driver for network. Followed the instructions for installing scan-key-tool. However when I tried to scan it detects no scanner. I then tried the solution offered in this answer to a question based on a similar brother printer, but no luck. I must have made a mistake somewhere along the line. Does anyone have any ideas what I can try to find out what? Or should I uninstall everything and start again from the beginning?

  Read the article

• Make Network Manager use bridge for PPPoE instead of only working on ethernet?

  - by Azendale

  My ISP uses PPPoE on their DSL connections. I use Network Manager to connect to this using a bridged modem connected to eth0. Often, I want to test networking things, so a set myself up a KVM machine with a tap interface. I can then connect these interfaces to to virtual 'switches' by adding them to bridges. (I work for my ISP). Sometimes, I want to test cases where the PPPoE is connected more than once. For this, I would like to be able to add eth0 to my 'switch' (a bridge) so the VMs can have a 'bridged modem' connection to the internet. But I would like to still be able to run the PPPoE for my computer at the same time. Which means that I need to get network-manager to run PPPoE over the bridge (or eth0). The problem is that it considers eth0 (and the bridge) 'not managed' by network manager, so it refuses to use it. So, how can I have network manager dial PPPoE over a bridge?

  Read the article

• Getting mybrother MFC-J825DW working as a network scanner

  - by AntonChanning

  I've been attempting to set up my new brother multi-function device to work as a printer and scanner using the following steps. It is connected to the network as a LAN device, not directly connected to my ubuntu machine. Downloaded the lpr driver and cupswrapper driver from Brother support. (Select the deb packages, not the rpms). Followed the instructions to install the lpr driver. Followed the instructions to install the cupswrapper driver. After this point I was able to successfully perform a test print, so the printer part is working. So far I haven't had much luck getting the scanner working. This is what I've tried: Downloaded the brscan4 and scan-key-tool deb packages from brother support. Followed the instructions for installing the scanner driver for network. Followed the instructions for installing scan-key-tool. However when I tried to scan it detects no scanner. I then tried the solution offered in this answer to a question based on a similar brother printer, but no luck. I must have made a mistake somewhere along the line. Does anyone have any ideas what I can try to find out what? Or should I uninstall everything and start again from the beginning?

  Read the article

• SSMS Tools Pack 2.0 is out! With huge productivity booster features that will blow your mind and ease your job even more.

  - by Mladen Prajdic

  What better way to end the summer and start those productive autumn days ahead than with a fresh new version of the SSMS Tools Pack. This is a big release with two new features that are huge productivity boosters. First new feature are Tab Sessions. Every SQL tab you open is saved every N (default 2) minutes and is stored in a session. This works similar to internet browser sessions. Once you reopen SSMS you can restores your last session with a click of a button. You even get every window connected to the server it was previously connected to. The Tab History Window looks like this:   The second feature is Execution Plan Analyzer. It is designed to quickly help you find costliest operators by a number of properties. If that's not enough you can easily search through the whole execution plan for whatever you like. And to top it off you can auto analyze the execution plan. The analysis reports various problems the execution plan has and suggests a most common solution. The ultimate purpose of the Execution Plan Analyzer is to make your troubleshooting quicker and easier. It uses a simple user interface that is easy to navigate and is built directly into the execution plan itself. The execution plan analyzer looks like this:   Smaller fixes include a completely redesigned SQL History Search window and various other bug fixes. You can download the new version 2.0 at the Download page. For more detailed feature descriptions go to the main Features Page. Enjoy it!

  Read the article

• How does a segment based rendering engine work?

  - by Calmarius

  As far as I know Descent was one of the first games that featured a fully 3D environment, and it used a segment based rendering engine. Its levels are built from cubic segments (these cubes may be deformed as long as it remains convex and sides remain roughly flat). These cubes are connected by their sides. The connected sides are traversable (maybe doors or grids can be placed on these sides), while the unconnected sides are not traversable walls. So the game is played inside of this complex. Descent was software rendered and it had to be very fast, to be playable on those 10-100MHz processors of that age. Some latter levels of the game are huge and contain thousands of segments, but these levels are still rendered reasonably fast. So I think they tried to minimize the amount of cubes rendered somehow. How to choose which cubes to render for a given location? As far as I know they used a kind of portal rendering, but I couldn't find what was the technique used in this particular kind of engine. I think the fact that the levels are built from convex quadrilateral hexahedrons can be exploited.

  Read the article

• Launcher icon size and window behavior broken

  - by philipp

  I have installed the nvidia driver for my graphic card, just following some tutorials what works fine now. After this I could set the Icon size of the launcher, windows had a nice litte shadow, resolution was better and the windows showed up a nice effect when popping up an or when bringing to full-screen... But today the this was just gone after reboot. What could this be? Nvidia xserver-settings are availible. I installed and reinstalled wine1.5 via the apt-get commands, so this might broke something. What can do to fix this again? Greetings philipp EDIT: I went on searching and all i found was that this problem might be connected to the mode of unit, so there is 2d and 3d, but could also be something else, just because setting the mode brings no change. EDIT 2: the version of Ubuntu is: 12.04 and it is a 64 bit environment the graphic card is: GeForce GT 330M Edit 3: Using maps.google in webGL mode does not work anymore too, it was working yesterday. EDIT 4: the screenshot. btw: I think that blender is not working anymore too... EDIT: 5 I think that the problem is closely connected to this output

  Read the article

• CodeGolf : Find the Unique Paths

  - by st0le

  Here's a pretty simple idea, in this pastebin I've posted some pair of numbers. These represent Nodes of a unidirected connected graph. The input to stdin will be of the form, (they'll be numbers, i'll be using an example here) c d q r a b d e p q so x y means x is connected to y (not viceversa) There are 2 paths in that example. a->b->c->d->e and p->q->r. You need to print all the unique paths from that graph The output should be of the format a->b->c->d->e p->q->r Notes You can assume the numbers are chosen such that one path doesn't intersect the other (one node belongs to one path) The pairs are in random order. They are more than 1 paths, they can be of different lengths. All numbers are less than 1000. If you need more details, please leave a comment. I'll amend as required. Shameless-Plug For those who enjoy Codegolf, please Commit at Area51 for its very own site:) (for those who don't enjoy it, please support it as well, so we'll stay out of your way...)

  Read the article

• Getting MTP to work with a Galaxy tab 2 7.0?

  - by Wouter

  I'm trying to get MTP with the galaxy tab 2 7.0 working on my ubuntu installation. Such that I can access the files. I tried to do what is described here: http://www.omgubuntu.co.uk/2011/12/how-to-connect-your-android-ice-cream-sandwich-phone-to-ubuntu-for-file-access I however fail at executing one of the following commands mtp-detect | grep idVendor mtp-detect | grep idProduct This fails [20:42|0] $ mtp-detect | grep idVender Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 [20:44|0] $ mtp-detect | grep idProduct Device 0 (VID=04e8 and PID=6860) is a Samsung GT-P7310/P7510/N7000/I9100/Galaxy Tab 7.7/10.1/S2/Nexus/Note. PTP_ERROR_IO: failed to open session, trying again after resetting USB interface LIBMTP libusb: Attempt to reset device LIBMTP PANIC: failed to open session on second attempt Unable to open raw device 0 Now my guess was was that the idVender is the same as the VID (04e8) and the idProduct is the same as PID (6860) Now I continued to work with those values and completed the tutorial. When finished I tried android-connect This returned fuse: bad mount point `/media/GalaxyTab': Transport endpoint is not connected Does anybody have a clue what to do? Also I want to note that when I connect my GalaxyTab 2 7.0 that I still get a pop-up of ubuntu that a device was connected. I also can still see the mapstructure, the problem however is is that all the folders have 0 bytes and do not have any subfolders. I can only see the folders in the root. ps. I also checked a similar question and tried what is described in this answer http://askubuntu.com/a/88630/27480

  Read the article

• internet sharing over wifi between ubuntu 11.10 and windows7

  - by Vivek Pradhan

  So i have looked up a lot of forums for these solution but haven't really found one that works. I have a laptop running ubuntu 11.10 connected to the ethernet cord at home and i want to share the internet over wifi with my friend's laptop running windows7. I did not think it would be so difficult, I tried a lot of things: I went to networks and then wireless and set up a wifi hotspot, my laptop got connected to it and the ipv4 was set to "shared to other computers". Thankfully the network was discoverable and after some tries my friend was able to connect to the network, but it still showed that there was no internet access. I tried coniguring the tcp addresses of the wifi on his laptop. Bottom line: did not work. I went to the network manager, clicked on create a new wireless network, created one with security WEP 40/128 bit passphrase, tried the other 2 options later, and did the same thing as with the wifi, this network was also not discoverable initially and after some tries, we could connect to it but then ICS was not working although there was a working internet on my ubuntu laptop. I would really appreciate if some one who has faced a similar problem and got it fixed to please give me a step by step solution of how to get this work, because this is a prety common problem with ubuntu distros I have noticed. Note: This however seems to work with ubuntu to ubuntu connections, but specifically cross OS connections like windows or my phone running android ICS are not able to see or if connect not able to share internet on my laptop

  Read the article

• Network Issues only on one network with a Broadcom BCM4312

  - by Ryan McClure

  My Ubuntu 11.10 laptop is having network connection issues...only on one network. I have a BCM4312 card and I'm using the proprietary driver. Whenever I connect to a network over wireless connection, I have no trouble except for one network. In my dorm, if I try to connect to the wireless network, it stays connected from anywhere to 30 seconds to 30 minutes before it will still be "connected" according to the indicator but there is no incoming/outgoing internet connection. This only happens in this building. Other networks with the same name at other buildings on my campus have no issue whatsoever. I took it to the tech department here and they keep claiming it's my laptop; but, if I can connect to other networks with absolutely no issues, why can't my laptop connect here? So, here's my question: Is it my laptop, or is it the network? As a side note, no one else that I know has issues on this network but one; she's running Windows 7 and I forget what kind of laptop it is. One of the people in my hall runs Ubuntu 12.04 and has no problem with the wireless. What do you all think of this?

  Read the article

• Cannot mount a CIFS network share over VPN

  - by Aron Rotteveel

  I have setup u VPN connection to our Windows 2008 server at the office and it seems to work fine. For some reason, however, I still am not able to access the network shares over a VPN connection using my standard fstab entries. When I am physically connected to the network, it works fine, but now when trying this over VPN I get the following error: mount error(110): Connection timed out Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) My /etc/fstab looks like this: //server2008/share /mnt/share cifs iocharset=utf8,credentials=/home/aron/.smbcredentials,uid=1000 0 0 As said, it works fine when physically connected, but over VPN it just wont work. Any help is appreciated. EDIT: It seems the Windows firewall is making things harder on me. When I turn it off, I get a bit further, although I still get the following error message: Unable to find suitable address. The strange thing is that I have file sharing added as an exception to the firewall. Port 137-139 and port 445 are open, which should suffice, shouldn't it? EDIT Jan 20th: Still not working. When I have the firewall turned on, it times out. When I turn it off, I get the not suitable address error. Turning the firewall off is not an option, by the way.

  Read the article

• HDMI video output not working for external monitor

  - by user291852

  I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

  Read the article

• make my Ubuntu 12.04 laptop visible on the network

  - by Andrew Boyd

  I'm ecstatically happy with my 12.04 on my laptop after loading it over my MS Vista... but there's just one thing, one little fly in the ointment.... While I can view our 2 Terabyte, shared hard-drive in the lounge (and copy files back and forth) I can't see my PC (when I boot up in Ubuntu 12.04) nor the Lubuntu computer connected to the TV (for movies, Youtube etc). Printing to the HP office jet on the PC doesnt work over the network either. Have had one dubious flirtation with Samba, which seems to be the only thing I've found that will 'work', however halfway through that "installation" everything just ground to a halt, the directions began to stop making sense... I was working from this page. Our Network consists of the following: Our Internet service is wirelessly sent to us from our provider to our dish on a pole. It comes into the house via an ethernet cable. We split it there to a phone, and to 6 other destinations (bedrooms, computers, and to another splitter in the lounge which has a wifi antennae and 4 ethernet ports). one port goes to the Lubuntu OS PC which is connected to the TV the second port goes to the 2 Terabyte harddrive (MS powered 'Mybooklive') (the other two are empty) My Ubuntu 12.04 laptop connects wirelessly to this splitter in the lounge. I know just enough about computers to get myself into an awful mess without too much trouble We usually can view friends' laptops when they get on our network (as they are invariably MS OS's) Our flatmate, who introduced us to Linux's computer is also invisible How can we make our Linux OS based computers visible on the network and share files and printing?

  Read the article

• Kubuntu 12.04 - DNS Issues

  - by AndrewJesaitis

  Starting yesterday (6/11/12), I've been having many network problems. When requesting a page in chrome, the page hangs on "Sending request" and then will eventually timeout. I'm within a VPN that has it's own DNS server. I've tried to manually set my DNS through the Network-Manager applet and by editing /etc/network/interfaces. Having no luck I unlinked the resolv.conf file and dumped the contents of my old resolv.conf into it. Again having no luck, I deactivated the dnsmasq server in /etc/NetworkManager/NetworkManager.conf by commenting out the dns=dnsmasq. $ cat NetworkManager.conf [main] plugins=ifupdown,keyfile #dns=dnsmasq no-auto-default=D0:67:E5:EA:B6:6B, [ifupdown] managed=false $ nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: D0:67:E5:EA:B6:6B Capabilities: Carrier Detect: yes Speed: 1000 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.254.122 Prefix: 24 (255.255.255.0) Gateway: 192.168.254.2 DNS: 192.168.254.1 What is strange is that the network will work fine for a few minutes then start to timeout. A few minutes later it will work again. I'm unable to hit internal or external sites when it is timing out. When I $dig local sites, I receive no answer. I do receive an answer from google.com. At this point, I would usually blame the DNS Server, especially since when I change to Google's DNS server things work. But, I need to use our internal DNS to hit our internal sites. Nobody else is having issues and they are all using DHCP. This group includes one user who is using 11.04. At this point, I'm at a loss for what to do, so any help would be appreciated.

  Read the article

• Brother MFC-J470DW scan function "Check Connection"

  - by user292599

  I have a Brother MFC-J470DW printer that I have connected to a Linux desktop (running Ubuntu 14.04) using a wireless router network. The printer works fine for printing and copying, but now I want to add the scan function. To set up the scan function, I went to the Brother web page for this printer: http://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&lang=en&prod=mfcj470dw_us_eu_as&os=128 and under Scanner Drivers selected "Scanner driver 64bit (deb package)", "Scan-key-tool 64bit (deb package)", and "Scanner Setting file (deb package)". For each package, I clicked the EULA, and selected "open with Ubuntu Software Center". Then after the USC window pops up, I click on Install and the red line goes from left to right. In each case, the USC window then had a green checkmark and the Install box changes to Reinstall (that's how you know it worked). So now I try it out. Hitting the Scan button on the printer, selecting "Scan to file", and hitting ok produces the message "Check Connection". I checked the Brother Linux Information FAQ (scanner) page and the 14th question seems the same as mine: When I try to use the scan key on my network connected machine, I receive the error "Check connection" or I can not select anything except "scan to FTP". I explored the solution given for this FAQ, but found from ifconfig that I am already using eth0, the default setting, so presumably that is not the problem. I also found brscan-skey installed in /usr/bin and did drrm@drrmlinux2:~$ brscan-skey -t drrm@drrmlinux2:~$ brscan-skey but that didn't help - I still get the "Check connection" message. What can you suggest to fix this problem?

  Read the article

• can't access SAMBA shares on UBUNTU-server from other computers

  - by larand

  Installed UBUNTU-server 12.04 and configured /etc/samba/smb.conf as: #======================= Global Settings ======================= [global] workgroup = HEMMA server string = %h server (Samba, Ubuntu) security = user wins support = yes dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = no passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ############ Misc ############ usershare allow guests = yes #======================= Share Definitions ======================= [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no [Bilder original] comment = Original bilder path = /mnt/bilder/org browseable = yes read only = no guest ok = no create mask = 0755 [Bilder publika] comment = Bilder för allmän visning path = /mnt/bilder/public browseable = yes read only = yes guest ok = yes [Musik] comment = Musik path = /mnt/music/public browseable = yes read only = yes guest ok = yes I have a network setup around a 4G router "HUAWEI B593" where some computers are connected by WIFI and others by LAN. The server is connected by LAN. On one computer running windows XP I can see the server but are not allowed to acces them. On another computer on the WIFI-net running win7 I cannot see the server at all but I can ping the server and I can see the smb-protocoll is running when sniffing with wireshark. I don't primarily want to use passwords, computers on the lan and wifi should be able to connect without any login-procedure. I'm sure my config is not sufficient but have hard to understand how I should do. Theres a lot of descriptions on the net but most is old and none have been of any help. I'm also confused by the fact that I can not se the sever on my win7-machine even though it communicates with the samba-server. Would be very happy if anyone could spread some light over this mess.

  Read the article

• Problem with SANE and CardScan

  - by TiuTalk

  I have a CardScan 60 II device and installed SANE in my Ubuntu 10.10 laptop. The problem is I can't make scanimage find the device. Quote: $ sudo sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. But I can't find the device: $ sudo scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

  Read the article

• What's so bad about pointers in C++?

  - by Martin Beckett

  To continue the discussion in Why are pointers not recommended when coding with C++ Suppose you have a class that encapsulates objects which need some initialisation to be valid - like a network socket. // Blah manages some data and transmits it over a socket class socket; // forward declaration, so nice weak linkage. class blah { ... stuff TcpSocket *socket; } ~blah { // TcpSocket dtor handles disconnect delete socket; // or better, wrap it in a smart pointer } The ctor ensures that socket is marked NULL, then later in the code when I have the information to initialise the object. // initialising blah if ( !socket ) { // I know socket hasn't been created/connected // create it in a known initialised state and handle any errors // RAII is a good thing ! socket = new TcpSocket(ip,port); } // and when i actually need to use it if (socket) { // if socket exists then it must be connected and valid } This seems better than having the socket on the stack, having it created in some 'pending' state at program start and then having to continually check some isOK() or isConnected() function before every use. Additionally if TcpSocket ctor throws an exception it's a lot easier to handle at the point a Tcp connection is made rather than at program start. Obviously the socket is just an example, but I'm having a hard time thinking of when an encapsulated object with any sort of internal state shouldn't be created and initialised with new.

  Read the article

• 12.04 wired network doesn't work RTL8111/8168B

  - by laket

  its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

  Read the article

• Webserver on a rotating server with NAT IP or changing IPs

  - by hpsoftware

  i would have to elaborate my questions so please have patience Explaining the logic. if you are familiar with logmein then it installs a client software on your computer then it kinda keeps tracks where you computer is as long as it's connected to internet. So you can always access your computer no matter where it is whatever it's IP is you just go to logmein.com and then you can just access it. Now what i am asking 1. Let's assume i have a website hosted on my laptop let's call it webserver. so then i move around i have a new IP sometime even on a hotel network is it possible to do something like what logmein does so i can keep moving around my Webserver to new IP but it has some local client or something which keeps updating my IP or something i am sure i would need a gateway server somewhere which is connected to my domain name via DNS so somebody accessing my website www.mywebsite.com goes to my main server then gets routed to my laptop which could be anywhere but my gateway server is able to communicate to my webserver I will keep updating the case description based on comments to make more sense. please have patience with me. Regards

  Read the article

• Huawei e303c data-card not working for Ubuntu 11.04?

  - by Umashankar

  Cheers to you. I got a problem in making a Mobile-BroadBand connection in Ubuntu 11.04, using 'Huawei e303c' usb data-card. I'm using Tata Docomo 3G sim-card (India, circle: Maharastra). My observations: 1.) I installed the device's driver 'Mobile-Partner For Linux'(which came up with the device). But it is not detecting my device. 2.) In Network Manager, Adding a Mobile-BroadBand connection is not able to detect the device (with or without the device's driver installed). 3.)I tried softwares like usb_modeswitch, gnomeppp, wvdial, sakis3G and followed their guidelines. These too didn't work. 4.) Without the driver, the system is able to identify the device (Mobile-Partner icon comes-up, that leads to driver setup files). But after installing the driver, nothing comes-up there. 5.) In all the above cases, when 'lsusb' cmd is fired, the prompt shows the connected data card (as 'DEVICE_ID:VENDOR_ID Huawei Technologies Ltd.,'). This is my problem. Give a solution to get my device connected. -Umash

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >