Search Results

Search found 8343 results on 334 pages for 'laptop disasters'.

Page 56/334 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

  • My hard drive seems to be overheating... what should I do?

    - by George Edison
    After a cold boot, the hard drive in my notebook jumps to 56? within an hour or so of idling. Is 56? a cause for alarm? Notes: The notebook is on a flat desk and none of the vents are obstructed. The video card is currently at 55? and the CPU at 50?. It's a Western Digital 250GB hard drive. SMART reports the drive healthy but does warn that: Edit: this problem had a very surprise ending. I inverted the notebook and unscrewed some of the panels on the back (there was one covering the hard drive, and one that provided access to the memory). I couldn't see any dust, so I simply screwed everything back together and powered it on... and it worked! The temperature is now staying at 46?, and it feels notable cooler to the touch. So I can only assume that some internal fan was malfunctioning or something. Whatever the case, it's working now so I won't complain. Edit: I have an SSD now, so temperature isn't as big an issue as it was when I had a mechanical drive.

    Read the article

  • Acer Aspire One getting extremely hot

    - by ascom
    I have an Acer Aspire One D250-1197. I really better type fast before it overheats again... For some reason, I'm having a problem with heat on my netbook only when I run Joli OS (Ubuntu 9.10 LTS?). When I leave it idle, with nothing running (other than the regular Joli OS desktop and a couple of doing-nothing terminals), heat slowly builds up to the point where the netbook is burning hot to the touch. I have never had this problem when running Windows 7 Starter (even though it gives me plenty of other headaches). It seems that the fan is spinning, but not fast enough to keep up with the heat buildup. Is there something wrong with the fan drivers? The computer doesn't seem to recognize that it is overheating. What can I do to solve this problem (other than shut it off or use Windows)? I'm currently on the wrong side of Earth (I mean, on vacation), so I just need a temporary fix, such as a driver I can install. Also, I have to use Linux, because I have to share out the wired connection in hotels wirelessly to the iPhones. EDIT: I'm switching from Joli OS to a more "proper" and up to date distribution (Xubuntu 13.04). I'll see if it still has the heat problem and try @nod's cpufreq idea.

    Read the article

  • How do I replace the screen of a Dell Ispiron 1545?

    - by Ajus10
    I got a new screen for a Dell Inspiron 1545. The old screen says Dell Inspiron 1545 LP156WH1 (TL)(C1?) HD and the new one says Dell Inspiron 1545 LP156WH1 (TL)(C1?) LCD Does that make a difference? All I can get to work on the new screen is the backlight. The old screen had a crack. Now when I plug the old one in, it will not turn on at all. Could I have blown the inverter or messed up the cable?

    Read the article

  • How to install windows without graphic's driver?

    - by Mike Redford
    My notebook's(Compaq Presario V5000) graphic card damaged last week and after that it will be restarted when I want to boot. So I tested it via windows live, and it booted from CD without any problem (as you know in win live, the graphic card doesn't recognize, and in setting of graphic card write : unknown ) Now my question : Is there anyway to install windows without any graphic driver please ?for example, Should I delete some installation files ?! PS : I tested Windows XP , VISTA and 7 but, when it goes to GUI installation restarted again :( Thanks for your help

    Read the article

  • Installation stops with cmd.exe window on Laptop

    - by Saariko
    I am installing W7 Ent on an LG R580. I am working with a valid ISO (installs perfect on other systems). During the installation, before the installation window, the process hangs, and I get a black, cmd.exe screen with the following: Select Administrator: X:\windows\system32\cmd.exe Microsoft Windows [Version 6.1.7601] with a prompt for: X:\windows\system32 My keyboard at that time only prints capital letters with '^' before each. Only thing that I am able to do is reboot. In the bios, I tried to disable USB Legacy ( thinking the problem is with my DVD ) - did not help.

    Read the article

  • How can I change the amount of video memory with a Mobile Intel 4 Series Express Chipset?

    - by user45924
    I have the chipset in the title. The Intel control panel says the following: Intel® Graphics Media Accelerator Driver for Mobile Report Report Date: 8/11/2010 Report Time[hr:mm:ss]: 20:2:54 Driver Version: 8.15.10.2182 Operating System: Windows 7 (6.1.7600) Default Language: English (Canada) DirectX* Version: 10.0 Physical Memory: 3963 MB Minimum Graphics Memory: 128 MB Maximum Graphics Memory: 1759 MB Graphics Memory in Use: 17 MB Processor: Intel64 Family 6 Model 23 Stepping 10 Processor Speed: 1995 MHz Vendor ID: 8086 Device ID: 2A42 Device Revision: 07 Even while playing games, the Graphics Memory in Use only ever goes up to 26 MB. I've looked in the BIOS; there's nothing there. Is there any way I can force it to go higher? Thanks :)

    Read the article

  • DBAN Hangs at PCI (sysfs)

    - by David
    I'm running Derik's Boot and Nuke 2.2.6 (beta). When I get to a blue screen(Not BSOD) the following is printed. Derik's Boot and Nuke 2.2.6 (beta) is starting. Waiting for USB devices to register..........................done. PCI (sys) After that, it just sits there forever... Any advice, other than an older version of DBAN? I have gotten this version of DBAN to work on an older machine before.

    Read the article

  • Windows 7 laptop's volume with headphones way too loud

    - by jcao219
    I have two headphones, neither has any amps or volume control, and both have the same problem with this computer. I normally have the volume on 10%, and that is optimal. I'm still very afraid that someday it will be at 100% and i'll accidentally have my headphones on. I tested how loud it is at maximum volume -- it's earsplittingly loud! In fact, it's so loud that if I lay the headphones down on the table, I can listen to a song perfectly clearly from meters away. Is there any way to make the volume control more safe for the ears?

    Read the article

  • Asus n61Ja notebook bios update

    - by zKs
    I wanted to update the bios, with an official bios update, from version 207 to 211. I didn't use winflash, I used easyflash in the bios. Everything seemed to be going okay; it deleted the old files, wrote the new ones, verified the new ones. Then it said: shutdown in/after 2 seconds and it shut down. Then nothing happened anymore. Power button completely unresponsive. The battery light was still on, and I'm not sure if I should've just waited... I didn't though, I thought I had to remove the battery, take the power off completely to be able to start it up again. So I'm wondering: what are my options here? My warranty expired and I don't really have the money to send it in and pay hundreds of bucks on repairs. Is there anything I can try? CMOS battery reset? Anything??? Please help me out! I would be very grateful :) ps. What was sort of odd btw, was that easyflash said something like that it was an unsigned bios and if I wanted to flash it anymore, if i wanted to 'force' it or something. It was with 100% certainty the correct update from the Asus.com support site, so I didn't take that 'warning' seriously.

    Read the article

  • Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem

    - by zchads
    Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem. Hardware Information: Buffalo Wireless Router/access point, Model: WZR-HP-G300NH-AP DSL Modem: Generic (actually not sure of manufacture). Service Provider: TOT (Thailand) Laptop-1: Windows XP and Belkin PCMIA Network Card Laptop-2: Windows XP unknown network card & Wifi Laptop-3: Windows 7 unknown network card & Wifi Outline of Problem/actions taken: After a recent power failure the router and laptop-1 connected to router were no longer able to access the internet. Actions taken to try and recover internet access: Using Laptop-1 tried to configure Router with PPPoe settings using software from Router Manufacture. During the installation process a Timeout error was experienced, unable to connect to WAN. Used Internet Explorer to communicate directly with Router using IP address. Changed settings to use PPPoe settings given by ISP. Router was not able to communicate with Internet. Repeated steps 1-4 again with no success. Reset Router and DSL modem. Repeated steps 1-4 again still no success. Tried connecting Laptop-1 directly to DSL to gain access to internet to research problem. No Network connection with DSL could be established…connection would be established for a second and then be lost and didn’t appear long enough to actually connect to DSL. Replugged LAN back into Router and connection was regained with laptop-1. Replugged Laptop-1 directly into DSL and again unable to establish network connection. Uninstalled network card and all of its drivers on Laptop-1. Reinstalled network card and drivers and tried connecting directly to DSL. Still unable to make network connection. Plugged DSL into Laptop-3 and Internet connection was established. Being Laptop-3 does not have a CD-Rom, Laptop-2 was tried to connect to the router. With Laptop-2 steps 1-7 ended up being repeated without success. Tried plugging Laptop-2 directly into DSL and again no network connection could be established. Using Laptop-3 with a direct connection to DSL downloaded latest Router FW. Installed router FW using Laptop-1. Tired the installation process again without success. Being desperate reinstalled OS on Laptop-1 still not success. Tried using “ipconfig” with router to see what was going on without success. With laptop-1 connected to DSL went through the “ipconfig /…” inputs to see if anything made a difference. Being the network card was not able to make a connection this provide very little information “media disconnected”. So now I have a router and two laptops which are unable to connect to the internet and sure could use some advice/help.

    Read the article

  • Restoring factory image of HP Laptop

    - by Ahmed
    I use a HP G62. I am unable to use my recovery disk to restore to factory settings. I had no problems earlier until I created an additional partition which I hear might have changed my hard disk to dynamic. How do I get back to 'normal'? I don't mind formatting the disk. I just want my factory OS back. .............. i get an error message at about 69 percent telling me that the restoration process failed. I'm using the factory image disks i created using the hp recovery manager. I have tried formating the hard drive clean and then restoring woth the cd, it didn't work. I was always able to restore before i created that partition.

    Read the article

  • Intermittent freeze of Windows 7 x64 on laptop

    - by georged
    I have Lenovo W500, 8GB RAM, 250GB Crucial SSD running Windows 7 x64 using boot-to-vhd. Lately I started to experience some random freezes for 5-30 seconds. And when I say "freeze" I mean it; it's like a time machine - no input taken, nothing is written anywhere, no log, no disk activity. And then suddenly machine would wake up and continue as if nothing happened. I do suspect that it's one of the drivers but I don't see any updates in the log lately except for .NET 4 framework and Adobe Reader. Out of new or updated software I can only recall Skype and IE9 but freezes started to occur definitely before IE install. Regular software includes but not limited to: Office 2010, VMWare Workstation, IE9, Chrome, Skype, Seesmic/TweeterDeck, Live Writer. How should I approach the "hunting season" to find our the culprit? Any tools or packages that could help me to identify the component, program, driver that causes the freeze? Cheers

    Read the article

  • Dell inspiron 1525 laptop won't boot up.

    - by Becca
    It comes to a page called "Dell Media Direct" and then loads another page where it says "A problem has been detected and windpws has been shut down to prevent damage to your computer." then it has a bunch of info about why it may be the cause. can someone please help?

    Read the article

  • Compaq 610 fan is constantly on and noisy, base is fairly hot too

    - by Dave
    The fans on both of my HP Compaq 610s are constantly on and the base is fairly hot and I don't know if this is standard issue. HP assures me that this is unusual and that I should return them as DOA. Because both laptops have this problem, I'm thinking that this might be a design flaw rather than a one-off problem. I've updated the BIOS and using their recommended power settings. Am I missing something? Is there anything I can do to fix it?

    Read the article

  • Freezing of computer while watching flash videos (contd)

    - by t3st
    I have asked this similar question Computer freezing while watching Flash videos from net two week before. As i mentioned in my previous problem my computer freezes while watching online videos showing 100% cpu usage. I have tried the suggestions given in that query and I have formated my whole computer and installed windows and other softwares (with latest updates) but the problem still presisting. If i watch a video online approximately after one hour my system shows very high cpu usage and when i close my browser cpu usage comes to normal(i tried to watch Cybergeddon but my computer is freezing from start,and also other youtube videos). Can you tell me whether its an hardware problem? if yes can you give any possible explanation( eg:motherboard problem,over heating etc) because i want to tell those reasons to my computer mechanic.

    Read the article

  • Use external speakers with laptop hooked to separate monitor?

    - by lhan16
    I have a laptop with a set of external speakers hooked up to it on my computer desk. The speakers use the standard 3.5mm audio (headphones) jack. The speakers work fine, but I've recently added a separate monitor to my laptop via HDMI. With the monitor hooked up to my laptop and the speakers still hooked up to the laptop, sound will only come out of the built-in monitor speakers. When I look at my audio settings, there are three different "audio playback devices" showing up, but only the built-in monitor speakers make noise when I click "test" (and I hear nothing when I set any of the other devices as the default. Does anyone know how I can still use my external speakers when using a separate monitor with my laptop? I'm hoping there is a solution that doesn't require the laptop to be open or closed, because I use both scenarios. I came across this post, but it doesn't look like they had much luck.

    Read the article

  • How to fully use the 4G in my Laptop under Ubuntu 9.10 - 32-bit

    - by jfmessier
    I have a Toshiba A100, which I upgraded to 4G of RAM. The hardware startup indeed shows 4G of RAM, and I recently installed Windows 7, just to see how it behaves on it. So far so good, it displays 4G of RAM. Not that I tried to use it all, but it displays it. Previously under XP, I also would see 4G of RAM. But under Ubuntu 9.10 (32 or 64 bits), it only displays 2.9 G of RAM. And my kernel is the "pae" compiled one, which is supposed to do the trick to work around the 32-bit CPU limitation. How can I get Ubuntu to fully use my 4G of RAM ?

    Read the article

  • Dell D620 Windows 7 Blank screen

    - by Dave Arkell
    When I installed Windows 7 on my Dell D620 it was all fine until a couple of days later most times when I either shut down or suspend (by closing the lid). When I unsuspend or startup the computer, there is often a completely blank screen (can't see post screen or anything), and restarting doesn't help. I've found that I can eventually bring it back up again by suspending and unsuspending a few times, but obviously this is not ideal. Has anyone else experienced this? I think it is a driver issue, that somehow the driver is putting the video card into a certain mode that it forgets how to get it back out of. Any ideas on a better solution than my switching off and on business? Edit: Turns out that the video card had burned out! IT managed to get me a new mainboard sorted for me.

    Read the article

  • Intel mobile CPU power consumption at idle levels?

    - by Ivan Petrushev
    I was wondering if someone has observations (or specifications) of different mobile processors power consumption levels when idle? Let's define 'idle' with 'browsing web sites trough wifi, no flash, no multitasking'. There are different series processors, recognizable by their first letter. The letter tells about the maximum TDP. For example: T - 30-39W P - max 25W L - 12-19W U - <12W However this is about maximum consumptions during load. Is there any difference in power levels when the CPU is idling?

    Read the article

  • Tablet with Dedicated Graphics

    - by GuyNoir
    What would be the best tablet PC with dedicated graphics. I can find a few, but most seem to be from around 2006-07. Is there anything newer that has both the tablet-based swivel screen and a non-integrated graphics board? Thanks.

    Read the article

  • Windows OS's cannot boot on new internal harddrive

    - by Kothari
    I have installed a new internal 500GB hard drive into a Dell Inspiron N4030 and it appears that the installation was entirely successful. The BIOS recognizes the drive and shows the serial number of the hard drive. The problem is that I cannot boot any Windows OS. I have tried XP, Vista, Windows 7 and Windows 8. It displays only a black screen with a blinking cursor. Fedora boots successfully. My old hard drive crashed, but would atleast boot up these OS's before it died. Any help?

    Read the article

  • Thinkpad Motherboard Component List

    - by Nirmal
    I got an IBM Thinkpad R51 notebook and it's not working. When opened I found that an IC next to the battery has burnt. The worst part is that the IC number is no more present on it due to the burning. Where could I get the schematics of such motherboards? Will the schematics have the part number? Please help. Thank you.

    Read the article

  • Good source of reviews of CULV machines?

    - by Jason Sundram
    I'm potentially interested in acquiring a CULV machine. I like the idea of a netbook, but need a little more horsepower. So, of course, I need to obsess over a hundred different reviews first. Can you recommend some good sources of CULV reviews? Anandtech recently ran a roundup, but I'd prefer sites that have ongoing CULV coverage. Thanks!

    Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >