Search Results

Search found 13900 results on 556 pages for 'physical drive'.

Page 56/556 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• How to create a RAM Drive (RAM Disk) in Windows 2008 R2?

  - by Mark

  There are lots of tools for creating RAM drives. None of them seem to work for windows 2008 R2. Does anyone know if this is possible and if so how. Does anyone know of a tool that does work? I've tried the gavotte ram disk. It doesn't work. When i try to install it it just sais "Failed". I don't see log files anywhere. I've tried a couple of other ones (forgot the names) to no avail. Any ideas? Thanks

  Read the article

• How to mount a blu-ray drive?

  - by Stephan Schielke

  Maybe it is for the best to close this question. This has nothing to do with a bluray drive in general anymore. Probably a hardware defect. I will try to test it with a windows system and different cables again... Thx so far. I have a bluray/dvd/cdrom drive with SATA. Ubuntu wont find it under /dev/sd wodim --devices wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg2' rwrw-- : 'HL-DT-ST' 'BDDVDRW CH08LS10' ------------------------------------------------------------------------- cdrecord -scanbus scsibus2: 2,0,0 200) 'HL-DT-ST' 'BDDVDRW CH08LS10' '2.00' Removable CD-ROM fdisk dont even lists it. Ubuntu only automounts blank DVDs, but neither CDROM nor Blurays. I also changed the sata slot, sata cable and the power cable. The drive works with a windows system. This happens when I try to mount: sudo mount -t auto /dev/scd0 /media/bluray mount: you must specify the filesystem type I tried all filesystems there are. I also installed makemkv. It finds the drive but not the disc. Here is my /dev ls -al /dev total 12 drwxr-xr-x 17 root root 4420 2011-11-25 19:36 . drwxr-xr-x 28 root root 4096 2011-11-25 07:12 .. crw------- 1 root root 10, 235 2011-11-25 19:28 autofs -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab -rw-r--r-- 1 root root 630 2011-11-25 19:28 .blkid.tab.old drwxr-xr-x 2 root root 700 2011-11-25 19:27 block drwxr-xr-x 2 root root 100 2011-11-25 19:27 bsg crw------- 1 root root 10, 234 2011-11-25 19:28 btrfs-control drwxr-xr-x 3 root root 60 2011-11-25 19:27 bus drwxr-xr-x 2 root root 3820 2011-11-25 19:28 char crw------- 1 root root 5, 1 2011-11-25 19:28 console lrwxrwxrwx 1 root root 11 2011-11-25 19:28 core -> /proc/kcore drwxr-xr-x 2 root root 60 2011-11-25 19:28 cpu crw------- 1 root root 10, 60 2011-11-25 19:28 cpu_dma_latency drwxr-xr-x 7 root root 140 2011-11-25 19:27 disk crw------- 1 root root 10, 61 2011-11-25 19:28 ecryptfs crw-rw---- 1 root video 29, 0 2011-11-25 19:28 fb0 lrwxrwxrwx 1 root root 13 2011-11-25 19:28 fd -> /proc/self/fd crw-rw-rw- 1 root root 1, 7 2011-11-25 19:28 full crw-rw-rw- 1 root fuse 10, 229 2011-11-25 19:28 fuse crw------- 1 root root 251, 0 2011-11-25 19:28 hidraw0 crw------- 1 root root 251, 1 2011-11-25 19:28 hidraw1 crw------- 1 root root 10, 228 2011-11-25 19:28 hpet lrwxrwxrwx 1 root root 14 2011-11-25 19:27 .initramfs -> /run/initramfs drwxr-xr-x 4 root root 220 2011-11-25 19:28 input crw------- 1 root root 1, 11 2011-11-25 19:28 kmsg srw-rw-rw- 1 root root 0 2011-11-25 19:28 log brw-rw---- 1 root disk 7, 0 2011-11-25 19:28 loop0 brw-rw---- 1 root disk 7, 1 2011-11-25 19:28 loop1 brw-rw---- 1 root disk 7, 2 2011-11-25 19:28 loop2 brw-rw---- 1 root disk 7, 3 2011-11-25 19:28 loop3 brw-rw---- 1 root disk 7, 4 2011-11-25 19:28 loop4 brw-rw---- 1 root disk 7, 5 2011-11-25 19:28 loop5 brw-rw---- 1 root disk 7, 6 2011-11-25 19:28 loop6 brw-rw---- 1 root disk 7, 7 2011-11-25 19:28 loop7 drwxr-xr-x 2 root root 60 2011-11-25 19:27 mapper crw------- 1 root root 10, 227 2011-11-25 19:28 mcelog crw-r----- 1 root kmem 1, 1 2011-11-25 19:28 mem drwxr-xr-x 2 root root 60 2011-11-25 19:27 net crw------- 1 root root 10, 59 2011-11-25 19:28 network_latency crw------- 1 root root 10, 58 2011-11-25 19:28 network_throughput crw-rw-rw- 1 root root 1, 3 2011-11-25 19:28 null crw-rw-rw- 1 root root 195, 0 2011-11-25 19:28 nvidia0 crw-rw-rw- 1 root root 195, 255 2011-11-25 19:28 nvidiactl crw------- 1 root root 1, 12 2011-11-25 19:28 oldmem crw-r----- 1 root kmem 1, 4 2011-11-25 19:28 port crw------- 1 root root 108, 0 2011-11-25 19:28 ppp crw------- 1 root root 10, 1 2011-11-25 19:28 psaux crw-rw-rw- 1 root tty 5, 2 2011-11-25 20:00 ptmx drwxr-xr-x 2 root root 0 2011-11-25 19:27 pts brw-rw---- 1 root disk 1, 0 2011-11-25 19:28 ram0 brw-rw---- 1 root disk 1, 1 2011-11-25 19:28 ram1 brw-rw---- 1 root disk 1, 10 2011-11-25 19:28 ram10 brw-rw---- 1 root disk 1, 11 2011-11-25 19:28 ram11 brw-rw---- 1 root disk 1, 12 2011-11-25 19:28 ram12 brw-rw---- 1 root disk 1, 13 2011-11-25 19:28 ram13 brw-rw---- 1 root disk 1, 14 2011-11-25 19:28 ram14 brw-rw---- 1 root disk 1, 15 2011-11-25 19:28 ram15 brw-rw---- 1 root disk 1, 2 2011-11-25 19:28 ram2 brw-rw---- 1 root disk 1, 3 2011-11-25 19:28 ram3 brw-rw---- 1 root disk 1, 4 2011-11-25 19:28 ram4 brw-rw---- 1 root disk 1, 5 2011-11-25 19:28 ram5 brw-rw---- 1 root disk 1, 6 2011-11-25 19:28 ram6 brw-rw---- 1 root disk 1, 7 2011-11-25 19:28 ram7 brw-rw---- 1 root disk 1, 8 2011-11-25 19:28 ram8 brw-rw---- 1 root disk 1, 9 2011-11-25 19:28 ram9 crw-rw-rw- 1 root root 1, 8 2011-11-25 19:28 random crw-rw-r--+ 1 root root 10, 62 2011-11-25 19:28 rfkill lrwxrwxrwx 1 root root 4 2011-11-25 19:28 rtc -> rtc0 crw------- 1 root root 254, 0 2011-11-25 19:28 rtc0 lrwxrwxrwx 1 root root 3 2011-11-25 19:38 scd0 -> sr0 brw-rw---- 1 root disk 8, 0 2011-11-25 19:28 sda brw-rw---- 1 root disk 8, 1 2011-11-25 19:28 sda1 brw-rw---- 1 root disk 8, 2 2011-11-25 19:28 sda2 brw-rw---- 1 root disk 8, 3 2011-11-25 19:28 sda3 brw-rw---- 1 root disk 8, 5 2011-11-25 19:28 sda5 brw-rw---- 1 root disk 8, 6 2011-11-25 19:28 sda6 brw-rw---- 1 root disk 8, 16 2011-11-25 19:28 sdb brw-rw---- 1 root disk 8, 17 2011-11-25 19:28 sdb1 crw-rw---- 1 root disk 21, 0 2011-11-25 19:28 sg0 crw-rw---- 1 root disk 21, 1 2011-11-25 19:28 sg1 crw-rw----+ 1 root cdrom 21, 2 2011-11-25 19:28 sg2 lrwxrwxrwx 1 root root 8 2011-11-25 19:28 shm -> /run/shm crw------- 1 root root 10, 231 2011-11-25 19:28 snapshot drwxr-xr-x 4 root root 280 2011-11-25 19:28 snd brw-rw----+ 1 root cdrom 11, 0 2011-11-25 19:38 sr0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stderr -> /proc/self/fd/2 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdin -> /proc/self/fd/0 lrwxrwxrwx 1 root root 15 2011-11-25 19:28 stdout -> /proc/self/fd/1 crw-rw-rw- 1 root tty 5, 0 2011-11-25 19:35 tty crw--w---- 1 root tty 4, 0 2011-11-25 19:28 tty0 crw------- 1 root root 4, 1 2011-11-25 19:28 tty1 crw--w---- 1 root tty 4, 10 2011-11-25 19:28 tty10 crw--w---- 1 root tty 4, 11 2011-11-25 19:28 tty11 crw--w---- 1 root tty 4, 12 2011-11-25 19:28 tty12 crw--w---- 1 root tty 4, 13 2011-11-25 19:28 tty13 crw--w---- 1 root tty 4, 14 2011-11-25 19:28 tty14 crw--w---- 1 root tty 4, 15 2011-11-25 19:28 tty15 crw--w---- 1 root tty 4, 16 2011-11-25 19:28 tty16 crw--w---- 1 root tty 4, 17 2011-11-25 19:28 tty17 crw--w---- 1 root tty 4, 18 2011-11-25 19:28 tty18 crw--w---- 1 root tty 4, 19 2011-11-25 19:28 tty19 crw------- 1 root root 4, 2 2011-11-25 19:28 tty2 crw--w---- 1 root tty 4, 20 2011-11-25 19:28 tty20 crw--w---- 1 root tty 4, 21 2011-11-25 19:28 tty21 crw--w---- 1 root tty 4, 22 2011-11-25 19:28 tty22 crw--w---- 1 root tty 4, 23 2011-11-25 19:28 tty23 crw--w---- 1 root tty 4, 24 2011-11-25 19:28 tty24 crw--w---- 1 root tty 4, 25 2011-11-25 19:28 tty25 crw--w---- 1 root tty 4, 26 2011-11-25 19:28 tty26 crw--w---- 1 root tty 4, 27 2011-11-25 19:28 tty27 crw--w---- 1 root tty 4, 28 2011-11-25 19:28 tty28 crw--w---- 1 root tty 4, 29 2011-11-25 19:28 tty29 crw------- 1 root root 4, 3 2011-11-25 19:28 tty3 crw--w---- 1 root tty 4, 30 2011-11-25 19:28 tty30 crw--w---- 1 root tty 4, 31 2011-11-25 19:28 tty31 crw--w---- 1 root tty 4, 32 2011-11-25 19:28 tty32 crw--w---- 1 root tty 4, 33 2011-11-25 19:28 tty33 crw--w---- 1 root tty 4, 34 2011-11-25 19:28 tty34 crw--w---- 1 root tty 4, 35 2011-11-25 19:28 tty35 crw--w---- 1 root tty 4, 36 2011-11-25 19:28 tty36 crw--w---- 1 root tty 4, 37 2011-11-25 19:28 tty37 crw--w---- 1 root tty 4, 38 2011-11-25 19:28 tty38 crw--w---- 1 root tty 4, 39 2011-11-25 19:28 tty39 crw------- 1 root root 4, 4 2011-11-25 19:28 tty4 crw--w---- 1 root tty 4, 40 2011-11-25 19:28 tty40 crw--w---- 1 root tty 4, 41 2011-11-25 19:28 tty41 crw--w---- 1 root tty 4, 42 2011-11-25 19:28 tty42 crw--w---- 1 root tty 4, 43 2011-11-25 19:28 tty43 crw--w---- 1 root tty 4, 44 2011-11-25 19:28 tty44 crw--w---- 1 root tty 4, 45 2011-11-25 19:28 tty45 crw--w---- 1 root tty 4, 46 2011-11-25 19:28 tty46 crw--w---- 1 root tty 4, 47 2011-11-25 19:28 tty47 crw--w---- 1 root tty 4, 48 2011-11-25 19:28 tty48 crw--w---- 1 root tty 4, 49 2011-11-25 19:28 tty49 crw------- 1 root root 4, 5 2011-11-25 19:28 tty5 crw--w---- 1 root tty 4, 50 2011-11-25 19:28 tty50 crw--w---- 1 root tty 4, 51 2011-11-25 19:28 tty51 crw--w---- 1 root tty 4, 52 2011-11-25 19:28 tty52 crw--w---- 1 root tty 4, 53 2011-11-25 19:28 tty53 crw--w---- 1 root tty 4, 54 2011-11-25 19:28 tty54 crw--w---- 1 root tty 4, 55 2011-11-25 19:28 tty55 crw--w---- 1 root tty 4, 56 2011-11-25 19:28 tty56 crw--w---- 1 root tty 4, 57 2011-11-25 19:28 tty57 crw--w---- 1 root tty 4, 58 2011-11-25 19:28 tty58 crw--w---- 1 root tty 4, 59 2011-11-25 19:28 tty59 crw------- 1 root root 4, 6 2011-11-25 19:28 tty6 crw--w---- 1 root tty 4, 60 2011-11-25 19:28 tty60 crw--w---- 1 root tty 4, 61 2011-11-25 19:28 tty61 crw--w---- 1 root tty 4, 62 2011-11-25 19:28 tty62 crw--w---- 1 root tty 4, 63 2011-11-25 19:28 tty63 crw--w---- 1 root tty 4, 7 2011-11-25 19:28 tty7 crw--w---- 1 root tty 4, 8 2011-11-25 19:28 tty8 crw--w---- 1 root tty 4, 9 2011-11-25 19:28 tty9 crw------- 1 root root 5, 3 2011-11-25 19:28 ttyprintk crw-rw---- 1 root dialout 4, 64 2011-11-25 19:28 ttyS0 crw-rw---- 1 root dialout 4, 65 2011-11-25 19:28 ttyS1 crw-rw---- 1 root dialout 4, 74 2011-11-25 19:28 ttyS10 crw-rw---- 1 root dialout 4, 75 2011-11-25 19:28 ttyS11 crw-rw---- 1 root dialout 4, 76 2011-11-25 19:28 ttyS12 crw-rw---- 1 root dialout 4, 77 2011-11-25 19:28 ttyS13 crw-rw---- 1 root dialout 4, 78 2011-11-25 19:28 ttyS14 crw-rw---- 1 root dialout 4, 79 2011-11-25 19:28 ttyS15 crw-rw---- 1 root dialout 4, 80 2011-11-25 19:28 ttyS16 crw-rw---- 1 root dialout 4, 81 2011-11-25 19:28 ttyS17 crw-rw---- 1 root dialout 4, 82 2011-11-25 19:28 ttyS18 crw-rw---- 1 root dialout 4, 83 2011-11-25 19:28 ttyS19 crw-rw---- 1 root dialout 4, 66 2011-11-25 19:28 ttyS2 crw-rw---- 1 root dialout 4, 84 2011-11-25 19:28 ttyS20 crw-rw---- 1 root dialout 4, 85 2011-11-25 19:28 ttyS21 crw-rw---- 1 root dialout 4, 86 2011-11-25 19:28 ttyS22 crw-rw---- 1 root dialout 4, 87 2011-11-25 19:28 ttyS23 crw-rw---- 1 root dialout 4, 88 2011-11-25 19:28 ttyS24 crw-rw---- 1 root dialout 4, 89 2011-11-25 19:28 ttyS25 crw-rw---- 1 root dialout 4, 90 2011-11-25 19:28 ttyS26 crw-rw---- 1 root dialout 4, 91 2011-11-25 19:28 ttyS27 crw-rw---- 1 root dialout 4, 92 2011-11-25 19:28 ttyS28 crw-rw---- 1 root dialout 4, 93 2011-11-25 19:28 ttyS29 crw-rw---- 1 root dialout 4, 67 2011-11-25 19:28 ttyS3 crw-rw---- 1 root dialout 4, 94 2011-11-25 19:28 ttyS30 crw-rw---- 1 root dialout 4, 95 2011-11-25 19:28 ttyS31 crw-rw---- 1 root dialout 4, 68 2011-11-25 19:28 ttyS4 crw-rw---- 1 root dialout 4, 69 2011-11-25 19:28 ttyS5 crw-rw---- 1 root dialout 4, 70 2011-11-25 19:28 ttyS6 crw-rw---- 1 root dialout 4, 71 2011-11-25 19:28 ttyS7 crw-rw---- 1 root dialout 4, 72 2011-11-25 19:28 ttyS8 crw-rw---- 1 root dialout 4, 73 2011-11-25 19:28 ttyS9 d rwxr-xr-x 3 root root 60 2011-11-25 19:28 .udev crw-r----- 1 root root 10, 223 2011-11-25 19:28 uinput crw-rw-rw- 1 root root 1, 9 2011-11-25 19:28 urandom drwxr-xr-x 2 root root 60 2011-11-25 19:27 usb crw------- 1 root root 252, 0 2011-11-25 19:28 usbmon0 crw------- 1 root root 252, 1 2011-11-25 19:28 usbmon1 crw------- 1 root root 252, 2 2011-11-25 19:28 usbmon2 crw------- 1 root root 252, 3 2011-11-25 19:28 usbmon3 crw------- 1 root root 252, 4 2011-11-25 19:28 usbmon4 crw------- 1 root root 252, 5 2011-11-25 19:28 usbmon5 crw------- 1 root root 252, 6 2011-11-25 19:28 usbmon6 crw------- 1 root root 252, 7 2011-11-25 19:28 usbmon7 crw------- 1 root root 252, 8 2011-11-25 19:28 usbmon8 drwxr-xr-x 4 root root 80 2011-11-25 19:28 v4l crw------- 1 root root 10, 57 2011-11-25 19:28 vboxdrv crw------- 1 root root 10, 56 2011-11-25 19:28 vboxnetctl drwxr-x--- 4 root vboxusers 80 2011-11-25 19:28 vboxusb crw-rw---- 1 root tty 7, 0 2011-11-25 19:28 vcs crw-rw---- 1 root tty 7, 1 2011-11-25 19:28 vcs1 crw-rw---- 1 root tty 7, 2 2011-11-25 19:28 vcs2 crw-rw---- 1 root tty 7, 3 2011-11-25 19:28 vcs3 crw-rw---- 1 root tty 7, 4 2011-11-25 19:28 vcs4 crw-rw---- 1 root tty 7, 5 2011-11-25 19:28 vcs5 crw-rw---- 1 root tty 7, 6 2011-11-25 19:28 vcs6 crw-rw---- 1 root tty 7, 128 2011-11-25 19:28 vcsa crw-rw---- 1 root tty 7, 129 2011-11-25 19:28 vcsa1 crw-rw---- 1 root tty 7, 130 2011-11-25 19:28 vcsa2 crw-rw---- 1 root tty 7, 131 2011-11-25 19:28 vcsa3 crw-rw---- 1 root tty 7, 132 2011-11-25 19:28 vcsa4 crw-rw---- 1 root tty 7, 133 2011-11-25 19:28 vcsa5 crw-rw---- 1 root tty 7, 134 2011-11-25 19:28 vcsa6 crw------- 1 root root 10, 63 2011-11-25 19:28 vga_arbiter crw-rw----+ 1 root video 81, 0 2011-11-25 19:28 video0 crw-rw-rw- 1 root root 1, 5 2011-11-25 19:28 zero sg_scan -i gives me: sudo sg_scan -i /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] ATA ST31000524NS SN12 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg1: scsi0 channel=0 id=1 lun=0 [em] ATA WDC WD15EADS-00S 01.0 [rmb=0 cmdq=0 pqual=0 pdev=0x0] /dev/sg2: scsi2 channel=0 id=0 lun=0 [em] HL-DT-ST BDDVDRW CH08LS10 2.00 [rmb=1 cmdq=0 pqual=0 pdev=0x5] sg_map gives me: /dev/sg0 /dev/sda /dev/sg1 /dev/sdb /dev/sg2 /dev/scd0 lsscsi -l gives me: [0:0:0:0] disk ATA ST31000524NS SN12 /dev/sda state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [0:0:1:0] disk ATA WDC WD15EADS-00S 01.0 /dev/sdb state=running queue_depth=1 scsi_level=6 type=0 device_blocked=0 timeout=30 [2:0:0:0] cd/dvd HL-DT-ST BDDVDRW CH08LS10 2.00 /dev/sr0 state=running queue_depth=1 scsi_level=6 type=5 device_blocked=0 timeout=30 my udf mod is: filename: /lib/modules/3.0.0-14-generic/kernel/fs/udf/udf.ko license: GPL description: Universal Disk Format Filesystem author: Ben Fennema srcversion: 6ABDE012374D96B9685B8E5 depends: crc-itu-t vermagic: 3.0.0-14-generic SMP mod_unload modversions Do I need special drivers or mods enabled? Do I need to change some BIOS settings? edit: Somehow I am now able to fire the mount command without any filesystem errors, but now I get: mount: no medium found on /dev/sr0

  Read the article

• How do I fix a corrupted harddrive after failed upgrade?

  - by Nil

  The problem originated when I was trying to fix this problem. Things went horribly, horribly wrong and I ended up with a new problem altogether. The last thing I did was run sudo apt-get install and that caused my system to freeze. I restarted my computer and it would not boot from the harddrive. I ran a copy of Ubuntu 12.10 from a flashdrive that I had and ran gparted to see if my partitions were all there. It returned this message: Invalid partition table on /dev/sda -- wrong signature 5208. The drive appeared as a 2TiB unallocated drive with an error. The drive had 4 partitions before (plus random unallocated space). There was a fat32 partition, an ext4 partition which contained ubuntu 13.04/13.10 (I don't even know which one at this point), an extended partition which contained a swap partition for my ubuntu partition (I was meaning to move that ubuntu partition into the extended partition, never got around to it), and another partition (I don't remember how I formatted it). I should also mention this is a 1TB harddrive. So in short, I have a corrupted partition table on my primary harddrive from which I boot from, how can I fix this? I tried mounting the drive with sudo mount /dev/sda1 /media/ubuntu then I changed my directory to said folder and tried to list files and this monstrosity happened: $ ls ls: cannot access ??w?j^?.: Input/output error ls: cannot access ??(? ?x?.|: Input/output error ls: cannot access 6W_@?)?._??: Input/output error ls: cannot access HB0v???.A}?: Input/output error ls: cannot access ???.?X: Input/output error ls: cannot access t)?.+?l: Input/output error ls: cannot access ?h@ ?.@ : Input/output error ls: cannot access >? @??.???: Input/output error ls: cannot access m???.??: Input/output error ls: cannot access @ if??a?: Input/output error ls: cannot access ?M!vN$?.??n: Input/output error ls: cannot access ?o? ??.Bm`: Input/output error ls: cannot access ?:I??? M. : Input/output error ls: cannot access W??.??: Input/output error ls: cannot access ?: Input/output error ls: cannot access ?W?s??: Input/output error ls: cannot access ?v?k?.???: Input/output error ls: cannot access 5?$<N??: Input/output error .x????.??i: Input/output error ls: cannot access je????.j?1: Input/output error XjD?.???: Input/output error ls: cannot access W??n???.?: Input/output error ls: cannot access ?^x.$"?: Input/output error ls: cannot access !??*!??j.??: Input/output error ls: cannot access '-??k?^?.???: Input/output error ls: cannot access b?w?w?b.\??: Input/output error ls: cannot access o????"z.??B: Input/output error ls: cannot access ??b?h.?3-: Input/output error ls: cannot access ??.$7: Input/output error ls: cannot access )??K.bk: Input/output error ls: cannot access s??z?.?(?: Input/output error ls: cannot access ?F@?0?.@?: Input/output error .?D: Input/output error .??: Input/output error ls: cannot access?????. @: Input/output error ls: cannot access ?/?? ?.??: No such file or directory ls: cannot access rk?p4q(?.?k: Input/output error This looks promising. This is the output of fdisk -l $ sudo fdisk -l /dev/sda Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x5208 of partition table 5 will be corrected by w(rite) Disk /dev/sda: 2199.0 GB, 2199023132672 bytes 255 heads, 63 sectors/track, 267349 cylinders, total 4294967056 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x44fdfe06 Device Boot Start End Blocks Id System /dev/sda1 113305600 894715903 390705152 c W95 FAT32 (LBA) /dev/sda2 894715904 1489307647 297295872 83 Linux /dev/sda3 1489309694 1497307135 3998721 5 Extended /dev/sda4 1497309184 1953523711 228107264 7 HPFS/NTFS/exFAT /dev/sda5 ? 3013257822 3688738171 337740175 aa Unknown

  Read the article

• How to check if a cdrom is in the tray remotely (via ssh)?

  - by adempewolff

  I have a server running Ubuntu 10.04 (it's on the other side of the world and I haven't built up the wherewithal to upgrade it remotely yet) and I have been told that there is a CD in one of it's two CD drives. I want to rip an image of the cd and then download it to my local computer (I don't need help with either of these steps). However, I cannot seem to confirm whether or not there actually is a CD in the drive as I was told. It did not automatically mount anywhere (which I'm thinking might just be a result of it being a headless server not running X, nautilus, or any of the other nice user friendly things). There are two CD drives connected via SCSI: austin@austinvpn:/proc/scsi$ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD400EB-75CP Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Lite-On Model: LTN486S 48x Max Rev: YDS6 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SAMSUNG Model: CD-R/RW SW-248F Rev: R602 Type: CD-ROM ANSI SCSI revision: 05 However when I try mounting either of these devices (and every other device that could possibly be the cd-drive), it says no medium found: austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd1 /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd0 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom1 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrw /cdrom mount: no medium found on /dev/sr1 Here are the contents of my /dev folder: austin@austinvpn:/proc/scsi$ ls /dev agpgart loop6 ram6 tty10 tty38 tty8 austinvpn loop7 ram7 tty11 tty39 tty9 block lp0 ram8 tty12 tty4 ttyS0 bsg mapper ram9 tty13 tty40 ttyS1 btrfs-control mcelog random tty14 tty41 ttyS2 bus mem rfkill tty15 tty42 ttyS3 cdrom net root tty16 tty43 urandom cdrom1 network_latency rtc tty17 tty44 usbmon0 cdrw network_throughput rtc0 tty18 tty45 usbmon1 char null scd0 tty19 tty46 usbmon2 console oldmem scd1 tty2 tty47 usbmon3 core parport0 sda tty20 tty48 usbmon4 cpu_dma_latency pktcdvd sda1 tty21 tty49 vcs disk port sda2 tty22 tty5 vcs1 dri ppp sda5 tty23 tty50 vcs2 ecryptfs psaux sg0 tty24 tty51 vcs3 fb0 ptmx sg1 tty25 tty52 vcs4 fd pts sg2 tty26 tty53 vcs5 full ram0 shm tty27 tty54 vcs6 fuse ram1 snapshot tty28 tty55 vcs7 hpet ram10 snd tty29 tty56 vcsa input ram11 sndstat tty3 tty57 vcsa1 kmsg ram12 sr0 tty30 tty58 vcsa2 log ram13 sr1 tty31 tty59 vcsa3 loop0 ram14 stderr tty32 tty6 vcsa4 loop1 ram15 stdin tty33 tty60 vcsa5 loop2 ram2 stdout tty34 tty61 vcsa6 loop3 ram3 tty tty35 tty62 vcsa7 loop4 ram4 tty0 tty36 tty63 vga_arbiter loop5 ram5 tty1 tty37 tty7 zero And here is my fstab file: austin@austinvpn:/proc/scsi$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/austinvpn-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=ed5520ae-c690-4ce6-881e-3598f299be06 /boot ext2 defaults 0 2 /dev/mapper/austinvpn-swap_1 none swap sw 0 0 Am I missing something/doing something wrong, or is there just no CD in the drive or is the drive possibly broken? Is there any nice command to list devices with mountable media? Thanks in advance for any help!

  Read the article

• HTC Android device mounted as USB drive is read-only unless I'm root

  - by Ian Dickinson

  When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

  Read the article

• Repair ext4 filesystem on USB drive

  - by phineas

  Yet another filesystem question. I wanted to use a USB drive that I hadn't mounted for a month or so and was surprised by the fact Ubuntu was unable to mount it. I looked it up in the disk utility and it said it discovered a device with 17 MB instead of 2 GB. The hardware looks intact, I hope for the best for repairing the ext4 filesystem. I followed the instructions from HOWTO: Repair a broken Ext4 Superblock in Ubuntu, but I wasn't successful. # fsck.ext4 -v /dev/sdb e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Filesystem blocks are invalid, however when I run the recommended solution to try the alternate superblock, I get the following output: # e2fsck -b 8193 /dev/sdb e2fsck 1.42.5 (29-Jul-2012) e2fsck: Invalid argument while trying to open /dev/sdb plus the same error message as in the last paragraph above. Any ideas how to recover the drive? Thank you very much! Edit: testdisk won't help. I'm still stunned why the tools only discover 17 MB.

  Read the article

• How to move ubuntu 12.04 on another drive

  - by Maksim

  How I can move my ubuntu on another drive? I know about clonezilla but problem is that destination drive is smaller the source one. Gparted can't copy-paste partition if destination not the end last partition. I tried dpkg --selected-packages and apt-clone. First one just not install all my packages and removed existed that now I have no full unity and not my all packages. Second one just fail on configuration package. But before I did that way I copy-paste my /etc to new system. My partition table destination : gpt 1 1049kB 106MB 105MB fat32 EFI System ??????????? 2 106MB 12,1GB 12,0GB ext4 3 12,1GB 66,3GB 54,2GB ext4 source: msdos 1 1049kB 12,0GB 12,0GB primary ext4 ??????????? 2 12,0GB 492GB 480GB primary ext4 3 492GB 500GB 8107MB primary linux-swap(v1) Gpt not working with ubuntu that use grub 1.99. I don't know why but my laptop can't boot any device with uefi just black screen and ubuntu detect it on fresh install.

  Read the article

• Upgrading to 12.10 on an external hard drive

  - by Tom Childers

  I did some googling on this and didn't find anything specific for my situation. I currently have 12.04 installed on an external USB hard drive. It's working great. I want to upgrade it to 12.10. My bandwidth is very limited so I have a friend who will download 12.10 for me and put it on a flash stik. Then I can upgrade without having to do the download myself. Which particular version of the 12.10 download file(s) should I get? Are there alternate 12.10 downloads that have all the packages? How do I set it up so when I upgrade 12.04 I can specify that it look in some local repository for the 12.10 files? Can I just dump the 12.10 files in some local directory? Or do I have do go thru some complex commands to create a local repository? I'm pretty new to Linux so a long process of complex terminal commands will probably be a show stopper for me. Remember that my 12.04 install resides on an external hard drive. And I have a laptop with multiple USB ports. Thanks! Advait

  Read the article

• Unable to detect windows hard drive while running Ubuntu 12.04 from USB

  - by eapen jacob

  I am completely new to Ubuntu. I experimented with Ubuntu 12.04 by running it from a USB drive, in-order to recover files from my hard disc. History: My laptop is an IBM R60 running windows 7. Suddenly it gave me an error stating "error 2100 - Hard drive initialization error". I have read all the forums and most of them suggested that I remove and replace my HDD and that did not work. And one site suggested to try using Ubuntu to recover files. I booted my system from USB, and once Ubuntu came up, I choose "Try Ubuntu". It came up fine and I was able to surf ,and do other things, etc. I was unable to to access my files which are on the hard disc and "Attached Devices" is grayed out. 1- Is there any way to gain access to my hard disc to recover the files? How do I navigate to search for my files. 2- Is it just simply not possible if the hard disc themselves are not working? Is that why I`m unable to find the drives. I know its a very novice question, but hoping someone would help me out. Thank you, Eapen

  Read the article

• How to mount a network drive?

  - by Relik

  Ok so I'm trying to set-up a home file server. I'm thinking about just setting it up as an FTP server, no particular reason other than I'm familiar with FTP and samba tends to be very frustrating. Basically the set-up I'm going for, is to be-able to create multiple user accounts for the server and restrict or allow access to specific folders on each user. FTP is the only way (that I know of) to accomplish a set-up like that. My question is how can I mount an FTP server as a drive in Ubuntu so that all my applications can access it just like any other driver or folder. An example would be downloading 12.10 via torrent when it comes out, I would like to be able to tell transmission to just download the file straight to my ftp server. I know how to do this in Windows, its actually very easy. But I cant figure it out in Ubuntu. I have tried using the "connect to server" option in nautilus, and it works, but it doesn’t give me the result I want, most applications don’t see the folder, while others can. Also I am open to options other than FTP if anyone has any suggestions. I've looked into FreeNAS but that doesn’t seem to allow me to control the user accounts the way I want to. Then after all is said and done I would still need a way to mount the shares as a drive in Ubuntu. The ability to mount network drives in windows is one of my favourite features, but seeing how Ubuntu is now my daily OS and has been for about 4 years, I really need a way to accomplish the same thing in Ubuntu. Also a GUI would be preferable, seeing as there will be multiple people using this server, I would like it to be as easy as possible. EDIT: this link here seems to be almost exactly what I'm wanting to do, if I could find a GUI that can do this ill be almost set. then I would just need to find a way to hide specific folders from certain users.

  Read the article

• ubuntu 12.04 installer does not recognize drive partitions

  - by endless forms

  I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

  Read the article

• Lenovo ThinkPad W530 problem to activate the optical/DVD drive

  - by Marko Apfel

  Problem Sometimes my notebook shows the optical drive as power off: But the hint there is not changing this state. Solution By looking in the device manager you see the next problem: So open the properties via right mouse click. This gives you the hint to remove the drive first. “Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)” Whether you select the comment by dragging the mouse over the the hidden part or pressing the button “Properties”. So we unplug and reinsert the ultrabay. If you think, now the system is working – you are wrong. Now the system is the meaning, that the ultrabay is unplugged. You could verify this by refresh the view in the device panel. Now there is no longer our device. Yet your great gig comes – unplug the ultra bay and reinsert it a second time! After this you could hear with a media inside, that the motor is really started and we have a working device What a difficult birth …

  Read the article

• ubuntu doesn't boot without flash drive

  - by Kasisnu

  i just installed ubuntu 11.04 onto this netbook. I had to use a flash key . during the install , i tried putting ubuntu on a separate partition , but it kept showing a 'no root file system is defined'. i didn't really know what i could do to fix it , so i decided to install it alongside windows. i have a windows 7 installation which works perfectly fine. So , the installation goes through perfectly . i give both OS's 40 Gigs of space . The comp restarts and NOTHING !. The computer boots directly into windows. During the install it said i'm supposed to be prompted at boot, and nothing happened. Ubuntu partitioned the C: drive but this partition doesn't show up in windows. If i boot using the flash drive, it shows the partition with the ubuntu installation. I tried reinstalling but now i don't get the prompt to asking me to install ubuntu. Really confused ..

  Read the article

• Creating an HTTP-Redirected Virtual Directopry in IIS 6.0 without specifying physical path & WMI/ADS

  - by Steve Johnson

  My question is : Is it possible to create a working IIS 6.0 Virtual Directory with providing Physical Path of the Virtual Directory.? I know that manually, it is not possible via IIS but programmatically such a virtual directory can be created. If an HTTPRedirect is set on that virtual directory but the site physical path is not specified, then will it work? Simply stated, how to create an HTTp-redirected Virtual Directory , directly without specifying any physical path to a folder or network share. Here is my code. Try If Directory.Exists(HomeDirectory) = False And Path.StartsWith("http://") = False Then Directory.CreateDirectory(HomeDirectory) End If Dim website As DirectoryEntry website = New DirectoryEntry("IIS://" & IISServer & "/W3SVC/" & WebsiteId & "/Root") Dim NewVDir As DirectoryEntry = website.Children.Add(VDirName, "IIsWebVirtualDir") If Path.StartsWith("http://") = False Then NewVDir.Properties("Path")(0) = Path NewVDir.Properties("HttpRedirect").Clear() Else NewVDir.Properties("HttpRedirect")(0) = Path End If If ((Perm And Permission.Read) = Permission.Read) Then NewVDir.Properties("AccessRead")(0) = True End If If ((Perm And Permission.Write) = Permission.Write) Then NewVDir.Properties("AccessWrite")(0) = True End If If ((Perm And Permission.DirBrowse) = Permission.DirBrowse) Then NewVDir.Properties("EnableDirBrowsing")(0) = True End If If ((Perm And Permission.CreatetApplication) = Permission.CreatetApplication) Then NewVDir.Invoke("AppCreate", True) End If If ((Perm And Permission.ScriptOnly) = Permission.ScriptOnly) Then NewVDir.Properties("AccessScript")(0) = True End If If ((Perm And Permission.ScriptNExecute) = Permission.ScriptNExecute) Then NewVDir.Properties("AccessExecute")(0) = True End If NewVDir.Properties("AuthAnonymous")(0) = True NewVDir.Properties("AuthNTLM")(0) = True NewVDir.Properties("AnonymousUserName")(0) = AnonUserName NewVDir.Properties("AnonymousUserPass")(0) = AnonPassword NewVDir.Properties("AppFriendlyName")(0) = AppFriendlyName NewVDir.CommitChanges() website.CommitChanges() NewVDir.Close() website.Close() Success = True Catch Err As Exception Throw New Exception("My Custom Exception Here: " & Err.Message) End Try

  Read the article

• Ubuntu 11.10 doesn't detect external usb hard drive

  - by Andrew

  I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

  Read the article

• Restoring databases to a set drive and directory

  - by okeofs

   Restoring databases to a set drive and directory Introduction Often people say that necessity is the mother of invention. In this case I was faced with the dilemma of having to restore several databases, with multiple ‘ndf’ files, and having to restore them with different physical file names, drives and directories on servers other than the servers from which they originated. As most of us would do, I went to Google to see if I could find some code to achieve this task and found some interesting snippets on Pinal Dave’s website. Naturally, I had to take it further than the code snippet, HOWEVER it was a great place to start. Creating a temp table to hold database file details First off, I created a temp table which would hold the details of the individual data files within the database. Although there are a plethora of fields (within the temp table below), I utilize LogicalName only within this example. The temporary table structure may be seen below:   create table #tmp ( LogicalName nvarchar(128)  ,PhysicalName nvarchar(260)  ,Type char(1)  ,FileGroupName nvarchar(128)  ,Size numeric(20,0)  ,MaxSize numeric(20,0), Fileid tinyint, CreateLSN numeric(25,0), DropLSN numeric(25, 0), UniqueID uniqueidentifier, ReadOnlyLSN numeric(25,0), ReadWriteLSN numeric(25,0), BackupSizeInBytes bigint, SourceBlocSize int, FileGroupId int, LogGroupGUID uniqueidentifier, DifferentialBaseLSN numeric(25,0), DifferentialBaseGUID uniqueidentifier, IsReadOnly bit, IsPresent bit,  TDEThumbPrint varchar(50) )    We now declare and populate a variable(@path), setting the variable to the path to our SOURCE database backup. declare @path varchar(50) set @path = 'P:\DATA\MYDATABASE.bak'   From this point, we insert the file details of our database into the temp table. Note that we do so by utilizing a restore statement HOWEVER doing so in ‘filelistonly’ mode.   insert #tmp EXEC ('restore filelistonly from disk = ''' + @path + '''')   At this point, I depart from what I gleaned from Pinal Dave.   I now instantiate a few more local variables. The use of each variable will be evident within the cursor (which follows):   Declare @RestoreString as Varchar(max) Declare @NRestoreString as NVarchar(max) Declare @LogicalName  as varchar(75) Declare @counter as int Declare @rows as int set @counter = 1 select @rows = COUNT(*) from #tmp  -- Count the number of records in the temp                                    -- table   Declaring and populating the cursor At this point I do realize that many people are cringing about the use of a cursor. Being an Oracle professional as well, I have learnt that there is a time and place for cursors. I would remind the reader that the data that will be read into the cursor is from a local temp table and as such, any locking of the records (within the temp table) is not really an issue.   DECLARE MY_CURSOR Cursor  FOR  Select LogicalName  From #tmp   Parsing the logical names from within the cursor. A small caveat that works in our favour,  is that the first logical name (of our database) is the logical name of the primary data file (.mdf). Other files, except for the very last logical name, belong to secondary data files. The last logical name is that of our database log file.   I now open my cursor and populate the variable @RestoreString Open My_Cursor  set @RestoreString =  'RESTORE DATABASE [MYDATABASE] FROM DISK = N''P:\DATA\ MYDATABASE.bak''' + ' with  '   We now fetch the first record from the temp table.   Fetch NEXT FROM MY_Cursor INTO @LogicalName   While there are STILL records left within the cursor, we dynamically build our restore string. Note that we are using concatenation to create ‘one big restore executable string’.   Note also that the target physical file name is hardwired, as is the target directory.   While (@@FETCH_STATUS <> -1) BEGIN IF (@@FETCH_STATUS <> -2) -- As long as there are no rows missing select @RestoreString = case  when @counter = 1 then -- This is the mdf file    @RestoreString + 'move  N''' + @LogicalName + '''' + ' TO N’’X:\DATA1\'+ @LogicalName + '.mdf' + '''' + ', '   -- OK, if it passes through here we are dealing with an .ndf file -- Note that Counter must be greater than 1 and less than the number of rows.   when @counter > 1 and @counter < @rows then -- These are the ndf file(s)    @RestoreString + 'move  N''' + @LogicalName + '''' + ' TO N’’X:\DATA1\'+ @LogicalName + '.ndf' + '''' + ', '   -- OK, if it passes through here we are dealing with the log file When @LogicalName like '%log%' then    @RestoreString + 'move  N''' + @LogicalName + '''' + ' TO N’’X:\DATA1\'+ @LogicalName + '.ldf' +'''' end --Increment the counter   set @counter = @counter + 1 FETCH NEXT FROM MY_CURSOR INTO @LogicalName END   At this point we have populated the varchar(max) variable @RestoreString with a concatenation of all the necessary file names. What we now need to do is to run the sp_executesql stored procedure, to effect the restore.   First, we must place our ‘concatenated string’ into an nvarchar based variable. Obviously this will only work as long as the length of @RestoreString is less than varchar(max) / 2.   set @NRestoreString = @RestoreString EXEC sp_executesql @NRestoreString   Upon completion of this step, the database should be restored to the server. I now close and deallocate the cursor, and to be clean, I would also drop my temp table.   CLOSE MY_CURSOR DEALLOCATE MY_CURSOR GO   Conclusion Restoration of databases on different servers with different physical names and on different drives are a fact of life. Through the use of a few variables and a simple cursor, we may achieve an efficient and effective way to achieve this task.

  Read the article

• Visual Studio Setup and Deployment - D Drive

  - by JB_SO

  I'm creating a VS2005 setup and deployment installer and I need to create some folders in the D: drive since the customer has a partitioned their hard-drive. I've created some folders in the filesystem view and hard-coded the 'DefaultLocation' parameter to point to the D: drive. Now my question is, is it possible to put a 'Condition' parameter that will check to see if the D: drive on the system that the software is being installed is (or is not) a CD-Drive. Thanks

  Read the article

• How to rename or relabel a Network Drive label

  - by Subhen

  I am mounting a network drive to windows using WNetAddConnection2 which is working fine but while mounting the drive by default it assigns the name as Server IP and FolderName , NDSTestFolder on 'NAS server (172.24.17.116)'(R:) I need to rename the drive label using SetVolumeLabel but this fails for the network drive saying invalid parameter while SetVolumeLabel works fine for the local drives. Is there a way I can rename or relabel a network drive? So that I can change NDSTestFolder on 'NAS server (172.24.17.116)'(R:) to NDS@MyFolder (R:)

  Read the article

• Why does my ReadyNas 4200 have a constant beep post disk failure

  - by swagner88

  Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

  Read the article

• Recruitment Drive - Things Don't Always Go As Planned - Stay Flexible by Kalyan Neelagiri

  - by david.talamelli

  I am one of the Recruiters for Oracle and work in our India Recruitment Team. When we are hiring for multiple positions we often hold Recruitment Events to interview a large number of people as effectively as possible. These Events are often held on the weekend as many people are not free to attend an all day event during the working week. Just recently during a recruitment campaign we were running I was tasked to set up a Recruitment Event for some roles we were hiring for. I have set up and run weekend recruitment events in the past which have all run smoothly. However, this time arranging this recruitment event was quite a challenge for me. The planned event was taking place on a Saturday. I had almost sent out the confirmed scheduled list of candidates to the respective hiring team on Friday and was on track for the event to take place, but unfortunately there was breaking news in the media that there was a strike called in the city because of some political agitations and protests taking place on the event day. The hiring manager had rushed to me asking for my thoughts and ideas. I was in two minds on what to do. One on hand I was not ready to cancel the event because of all the work that so many people had put into getting this prepared and also I did not want to reschedule the event at the last minute if I did not need to. On the other hand I understood it may be best to reschedule the event as people may not be able to attend based on the political protests taking place on the day. In the end I decided to gather and check for other options because this might cause confusion and a problem for the scheduled candidates to drive in to the venue. So we had concluded to reschedule our event plans and moved the event to the next week. The good news is that we successfully executed this recruitment drive the following Saturday. We were glad that 100% of the candidates we able to make it to the new interview date and despite all the agitations in the city we were successful in hiring people for all the roles we had open. Things do not always go as planned. The best laid plans can sometimes be for nought based on external factors outside of our control. What this experience has taught me is that rather than focus on the negatives when you are thrown a curveball the best approach is to stay flexible and focus on finding ways to reach your outcome. Your plans may need to change but you can still achieve the results you are after if you have the right mind set.

  Read the article

• I cannot read second internal HD

  - by Nathan

  I reformatted my Win "C" drive and loaded Ubuntu 11.04. The second internal HD of course is not read. It is shown in 'disk utility'. I try to mount it in disk utility but I get an error message error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sda1 is already mounted on / One problem I see is the error relates to sda1, but I am trying to mount sdb. Unfortunately, I am windows literate and ignorant of the coding for linux. Can someone help me with the code to mount my second drive (sdb) Nathan

  Read the article

• No Rush, Defragging that Drive can Wait [Humorous Image]

  - by Asian Angel

  That drive is only fragmented a little bit…nothing to worry about there. View a Larger Version of the Image You should defragment this volume. Ya think?! [via Fail Desk] What’s the Difference Between Sleep and Hibernate in Windows? Screenshot Tour: XBMC 11 Eden Rocks Improved iOS Support, AirPlay, and Even a Custom XBMC OS How To Be Your Own Personal Clone Army (With a Little Photoshop)

  Read the article

• How to setup Thinkpad features on Thinkpad T500

  - by gijoemike

  I have a IBM-Lenovo Thinkpad T500. I was previously a exclusive windows user, but recently installed ubuntu and loving it because of speed and interface. The only thing is that I don't get some features that I came to enjoy in windows. I need help setting these up: Hard-drive protection - active protection software that pauses drive when there is movement My printer doesn't work (can't find the driver for this one): canon Ip2600 A way to change which graphics chip to use while in OS. I have both the integrated and non integrated (dual-graphics). (If not easy to setup, I know there's a way to do it before it boots, but don't know how). CPU performance level - in windows you can pick "high performance", "power saver", etc.. to save batteries. My integrated camera w/light - it works but need an app where I can record videos, take snapshots, etc. can't find one that works. Thanks!

  Read the article

• Recover an HP recovery partition

  - by eric.chartier

  I have a (semi)-dead hard drive with an HP recovery partition on it. My goal is to Buy a new hard drive Copy the recovery partition to a drive ( dd if=/dev/sdb1 of=~/recovery.bak ) Make a new partition of 12000 mb with Windows 7 Copy back recovery partition to the new drive ( dd if=~/recovery.bak of=/dev/sdb1 ) Then press F11 when the laptop boots. However, this doesn't work. Any idea why? Edit: I suspect the F11 doesn't work because the laptop tries to boot the laptop, because my partition is the primary partition of the drive. Does anyone have any experience dealing with stuff like this?

  Read the article

• How to repair an external harddrive?

  - by dodohjk

  I would like to reformat my hard disk, and if possible recover the (somewhat unimportant) contents if possible. I have a Western Digital 1TB hard drive which had a NTFS partition. I unplugged the drive without safely removing it first. At first a pop up was asking me to use a Windows OS to run the chkdsk /f command, however, in the effort to keep using a Linux OS I used the ntfsfix command on the ubuntu terminal Now, when I try to access the hard drive, it doesn't show up anymore in Nautilus. I tried reformatting it using Disk Utility, but it gives me an error message, and Gparted would hang on the "Scanning devices" step infinitely. Please comment any output that you would like to see and I will add it to my question. EDIT disk utility tells me is on /dev/sdb the command sudo fdisk -l gives dodohjk@DodosPC:~$ sudo fdisk -l [sudo] password for dodohjk: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006fa8c Device Boot Start End Blocks Id System /dev/sda1 * 4094 482344959 241170433 5 Extended /dev/sda2 482344960 488396799 3025920 82 Linux swap / Solaris /dev/sda5 4096 31461127 15728516 83 Linux /dev/sda6 31463424 52434943 10485760 83 Linux /dev/sda7 52436992 62923320 5243164+ 83 Linux /dev/sda8 62924800 482344959 209710080 83 Linux Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6e697373 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sdb1 ? 1936269394 3772285809 918008208 4f QNX4.x 3rd part /dev/sdb2 ? 1917848077 2462285169 272218546+ 73 Unknown /dev/sdb3 ? 1818575915 2362751050 272087568 2b Unknown /dev/sdb4 ? 2844524554 2844579527 27487 61 SpeedStor Partition table entries are not in disk order I wrote something wrong here, however here the output of fsck /dev/sbd is dodohjk@DodosPC:~$ sudo fsck /dev/sdb fsck from util-linux 2.20.1 e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device&gt;

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >