Search Results

Search found 2583 results on 104 pages for 'ping'.

Page 56/104 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Weird WLAN connection

  - by tuelsch

  I assembled my first computer on my own. As I realised it had no WLAN (AsRock Z77 Extreme 4m) I bought a WLAN stick (ZyXel NWD 2105), plugged it in, started the setup from the CD and it worked, until I restarted the PC. That's when the problems started. The stick is able to connect to the router (P-660HN-F1Z) and the connection is stable, but not the internet access. In estimately 1 minute intervals there might be a short connection timeframe and dropbox or windows update are able to download some data, but as soon as I try to open a website the internet access is away. Note that the connection to the router does not shut down and remains stable at around 80-90%. The problem is definetly located on my pc, because with my laptop and phone the connection is stable and fast. Because I was so pissed off, I bought a EW-7612PIn V2 (PCI-E WLAN adapter), same problem. Now the weird thing is, if I don't use the PC for about 2 days, start it up, there is internet access (happened with both the stick and the PCI-E card). A bit slow, but it does not get away just like that, until I shut it down. Then, no matter how many times I restart, it won't come back. I googled a lot but now I'm at the end with my latin. Has anyone had a similar problem and resolved it? Technical details: Motherboard: AsRock Z77 Extreme 4M OS: Windows 7 professional 64bit Stick: Zyxel wireless N adapter NWD2105 PCI-E card: Edimax EW-7612PIn V2 Router: ZyXel P-660HN-F1Z Windows-IP-Konfiguration Hostname . . . . . . . . . . . . : xyz Primäres DNS-Suffix . . . . . . . : Knotentyp . . . . . . . . . . . . : Hybrid IP-Routing aktiviert . . . . . . : Nein WINS-Proxy aktiviert . . . . . . : Nein Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 5: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter # 3 Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Drahtlos-LAN-Adapter Drahtlosnetzwerkverbindung 4: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Edimax 802.11n Wireless Adapter Physikalische Adresse . . . . . . : 80-1F-02-61-C0-A6 DHCP aktiviert. . . . . . . . . . : Ja Autokonfiguration aktiviert . . . : Ja Verbindungslokale IPv6-Adresse . : fe80::38d2:f489:726d:1fb5%17(Bevorzugt) IPv4-Adresse . . . . . . . . . . : 192.168.1.41(Bevorzugt) Subnetzmaske . . . . . . . . . . : 255.255.255.0 Lease erhalten. . . . . . . . . . : Donnerstag, 15. November 2012 10:51:05 Lease läuft ab. . . . . . . . . . : Sonntag, 18. November 2012 10:51:18 Standardgateway . . . . . . . . . : 192.168.1.1 DHCP-Server . . . . . . . . . . . : 192.168.1.1 DHCPv6-IAID . . . . . . . . . . . : 578821890 DHCPv6-Client-DUID. . . . . . . . : 00-01-00-01-17-FF-D5-FE-BC-5F-F4-48-FC-4B DNS-Server . . . . . . . . . . . : 91.233.182.2 194.230.1.39 NetBIOS über TCP/IP . . . . . . . : Aktiviert Tunneladapter isatap.{263BEB98-344B-435C-888F-1B15B97C3AC1}: Medienstatus. . . . . . . . . . . : Medium getrennt Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Microsoft-ISATAP-Adapter Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja Tunneladapter Teredo Tunneling Pseudo-Interface: Verbindungsspezifisches DNS-Suffix: Beschreibung. . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physikalische Adresse . . . . . . : 00-00-00-00-00-00-00-E0 DHCP aktiviert. . . . . . . . . . : Nein Autokonfiguration aktiviert . . . : Ja IPv6-Adresse. . . . . . . . . . . : 2001:0:9d38:6ab8:209c:2944:3f57:fed6(Bevo rzugt) Verbindungslokale IPv6-Adresse . : fe80::209c:2944:3f57:fed6%11(Bevorzugt) Standardgateway . . . . . . . . . : :: NetBIOS über TCP/IP . . . . . . . : Deaktiviert C:\Users\xyz>ping 192.168.1.1 Ping wird ausgeführt für 192.168.1.1 mit 32 Bytes Daten: Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Antwort von 192.168.1.1: Bytes=32 Zeit=2ms TTL=254 Ping-Statistik für 192.168.1.1: Pakete: Gesendet = 4, Empfangen = 4, Verloren = 0 (0% Verlust), Ca. Zeitangaben in Millisek.: Minimum = 2ms, Maximum = 2ms, Mittelwert = 2ms

  Read the article

• Cannot enable network discovery on Windows Server 2008 R2

  - by dariom

  I'm trying to enable the Network Discovery feature on a newly installed Windows Server 2008 R2 instance. The network connection is in the Home or Work profile (it is not domain joined). These are the steps I've followed: Within the Network and Sharing Center I select Change advanced sharing settings Then I select the Turn on network discovery option for the current network profile (Home or Work) I then click Save changes If I then go back to the Advanced sharing settings screen the Turn off network discovery option is selected and the machine is not visible to others within the Network node in Windows Explorer. Things I've checked: I can ping the server and connect to it using the machine name/IP address. The Windows Firewall has exceptions for Network Discovery for both Private and Public networks. File and Printer sharing is enabled and I can transfer files to/from the server by connecting to the server using a UNC path. What am I missing here?

  Read the article

• heartbeat: Bad nodename in /etc/ha.d//haresources [node1]

  - by Richard

  I'm trying to start heartbeat on Ubuntu 10.04 with service heartbeat start, but getting the following errors: heartbeat[24829]: 2011/11/22_19:31:07 ERROR: Bad nodename in /etc/ha.d//haresources [node1] heartbeat[24829]: 2011/11/22_19:31:07 ERROR: Configuration error, heartbeat not started. On on server uname -n produces loadb1, on the second server uname -n produces loadb2. The two servers can ping each other okay with those names. This is /etc/ha.d/ha.cnf on both servers: debugfile /var/log/ha-debug logfile /var/log/ha-log logfacility local0 keepalive 2 deadtime 10 udpport 694 bcast eth1 ucast eth0 my.external.ip ucast eth0 my.external.ip ucast eth1 10.0.0.5 ucast eth1 10.0.0.6 #udp eth0 node loadb1 node loadb2 auto_failback off And this is /etc/ha.d/haresources on both servers: node1 IPaddr::46.20.121.113 httpd smb dhcpd Authkeys is also set up. What am I doing wrong? The part where I'm least clear is the ucast/bcast lines.

  Read the article

• Outlook 2007 unable to connect to exchange server

  - by mattwarren

  I came into the office a week ago and outlook has refused to connect ever since, it just says "Disconnected" in the bottom right-hand corner. I've tried restarting it, rebooting Windows etc. I'm the only one if our office who is having this problem, so it's not a general problem with the server. Things I've tried Pinging the server via IP address and host name, both work fine Connecting via OWA, this works using the same machine name Connecting to Exchange via HTTP ("Outlook Anywhere") doesn't work None of the suggestions in this question helped, http://serverfault.com/questions/21755/can-ping-exchange-server-cant-connect-outlook-to-it Disabling Windows firewall on my laptop also has no effect. There are no items in the event viewer that indicate that anything it up. Also no permissions have changed on the server since when it worked. What else can I do to diagnose this, any suggestions?

  Read the article

• OpenVPN DNS: VPN DNS stomping local VPN

  - by Eddie Parker

  I've finally noodled with OpenVPN enough to get it working. Even better, I can mount samba drives, ping network machines through the TUN device, etc - it's all great. However, I'm noticing that if I have the directive: push "dhcp-option DNS 10.0.1.1" # Push our local DNS to clients Then some of the machines that are normally visible by the client, on the client's side (i.e., not through the VPN) get masked with some other server out on the Internet. Is there any way to avoid this, besides hacking the 'hosts' file on the client machine? Ideally I'd like to only use my VPN's DNS for machines within that domain.

  Read the article

• What can cause a DirectAccess IPSec Main Mode Error "no policy configured"

  - by Mike Haboustak

  We have Microsoft's DirectAccess VPN set up on Server 2008 R2 with end-to-edge security, and we're having trouble with the manage-out tunnel. The DirectAccess client has DC/DNS and intranet connectivity, it can ping/rdp/etc to intranet hosts. However connections originating from those same intranet hosts can only intermittently reach the client. At times it works fine, other times it doesn't. When an inbound (intranet to client) connection is attempted there's an IPSec Main Mode failure logged: Event 4653 with a failure reason of "No Policy Configured". I think that it may be related to the state of the intranet (corp) access tunnel, and an overlap in the configured subnets for those polices. I haven't figured out exactly what's different in the scenario where the connection works and where it does not.

  Read the article

• MSDTC - Communication with the underlying transaction manager has failed (Firewall open, MSDTC netwo

  - by SocialAddict

  I'm having problems with my ASP.NET web forms system. It worked on our test server but now we are putting it live one of the servers is within a DMZ and the SQL server is outside of that (on our network still though - although a different subnet) I have open up the firewall completely between these two boxes to see if that was the issue and it still gives the error message "Communication with the underlying transaction manager has failed" whenever we try and use the "TransactionScope". We can access the data for retrieval it's just transactions that break it. We have also used msdtc ping to test the connection and with the amendments on the firewall that pings successfully, but the same error occurs! How do i resolve this error? Any help would be great as we have a system to go live today. Panic :)

  Read the article

• OpenVPN Error : TLS Error: local/remote TLS keys are out of sync: [AF_INET]

  - by Lucidity

  Fist off thanks for reading this, I appreciate any and all suggestions. I am having some serious problems reconnecting to my OpenVPN client using Riseup.net's VPN. I have spent a few days banging my head against the wall in attempts to set this up on my iOS devices....but that is a whole other issue. I was however able to set it up on my Mac OS X specifically on my Windows Vista 32 bit BootCamp VM with relatively little trouble. To originally connect I only had to modify the recommended Config file very slightly (Config file included at the end of this post): - I had to enter the code directly into my config file - And change "dev tap" to "dev tun" So I was connected. (Note - I did test to ensure the VPN was actually working after I originally connected, it was. Also verified the .pem file (inserted as the coding in my config file) for authenticity). I left the VPN running. My computer went to sleep. Today I went to use the internet expecting (possibly incorrectly - I am now unsure if I was wrong to leave it running) to still be connected to the VPN. However I saw immediately I was not. I went to reconnect. And was (am) unable to. My logs after attempting to connect (and getting a connection failed dialog box) show everything working as it should (as far as I can tell) until the end where I get the following lines: Mon Sep 23 21:07:49 2013 us=276809 Initialization Sequence Completed Mon Sep 23 21:07:49 2013 us=276809 MANAGEMENT: >STATE:1379995669,CONNECTED,SUCCESS, OMITTED Mon Sep 23 21:22:50 2013 us=390350 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 21:23:39 2013 us=862180 TLS Error: local/remote TLS keys are out of sync: [AF_INET] VPN IP OMITTED [2] Mon Sep 23 21:23:57 2013 us=395183 Authenticate/Decrypt packet error: packet HMAC authentication failed Mon Sep 23 22:07:41 2013 us=296898 TLS: soft reset sec=0 bytes=513834601/0 pkts=708032/0 Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=1, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=Riseup Networks, [email protected] Mon Sep 23 22:07:41 2013 us=671299 VERIFY OK: depth=0, C=US, O=Riseup Networks, L=Seattle, ST=WA, CN=vpn.riseup.net Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Mon Sep 23 22:07:46 2013 us=772508 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Mon Sep 23 22:07:46 2013 us=772508 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA So I have searched for a solution online and I have included what I have attempted below, however I fear (know) I am not knowledgeable enough in this area to fix this myself. I apologize in advance for my ignorance. I do tech support for a living, but not this kind of tech support unfortunately. Other notes and troubleshooting done - - Windows Firewall is disabled completely, as well as other Anti-virus programs - Tor is disabled completely - No Proxies running - Time is correct in all locations - Router Firmware is up to date - Able to connect to the internet and as far as I can tell all necessary ports are open. - No settings have been altered since I was able to connect successfully. - Ethernet as well as wifi connections attempted, resulted in same error. Also tried adding the following lines to my config file (without success or change in error): persist-key persist-tun proto tcp (after reading that this error generally occurs on UDP connections, and is extremely rare on TCP) resolv-retry infinite (thinking the connection may have timed out since the issues occurred after leaving VPN connected during about 10 hrs of computer in sleep mode) All attempts resulted in exact same error code included at the top of this post. The original suggestions I found online stated - (regarding the TLS Error) - This error should resolve itself within 60 seconds, or if not quit wait 120 seconds and try again. (Which isnt the case here...) (regarding the Out of Sync" error) - If you continue to get "out of sync" errors and the link does not come up, then it means that something is probably wrong with your config file. You must use either ping and ping-restart on both sides of the connection, or keepalive on the server side of a client/server connection, in order to gracefully recover from "local/remote TLS keys are out of sync" errors. I wouldn't be surprised if my config file is lacking, or not correct. However I can confirm I followed the instructions to a tee. And was able to connect originally (and have not modified my settings or config file since I was able to connect to when the error began occurring). I have a very simple config file: client dev tun tun-mtu 1500 remote vpn.riseup.net auth-user-pass ca RiseupCA.pem redirect-gateway verb 4 <ca> -----BEGIN CERTIFICATE----- [OMITTED] -----END CERTIFICATE----- </ca> I would really appreciate any help or suggestions. I am at a total loss here, I know I'm asking a lot here. Though I am a new user on this site I help others on many forums including Microsoft's support community and especially Apple's support communities, so I will definitely pass on anything I learn here to help others. Thanks so so so much in advance for reading this.

  Read the article

• Fonts still missing in Flash after cleaning caches

  - by Anriëtte Combrink

  Hi there I was having missing fonts in Flash CS4, so I cleaned the font caches using the following commands in Terminal: sudo atsutil databases -remove atsutil server -shutdown atsutil server -ping These commands ran fine, so I restarted and opened my Flash file. Now suddenly Verdana is missing in Flash which was previously there. I ran FontNuke, and cleaned caches, and rebooted. Still nothing showed in Flash. I ran Cocktail, and cleaned just the font caches (all users on system), still nothing in Flash. I reinstalled Flash (didn't work) I then uninstalled Flash, rebooted and installed Flash, rebooted. (didn't work) After all this, Verdana still doesn't load in Flash. I validated all fonts in Font Book and removed the erroneous fonts. Is there any other way I can have all the fonts load in Flash (eliminate another cache I am not seeing)? I am so sick of Flash and its font caches and Verdana is pretty much a standard font so what am I doing wrong here?

  Read the article

• Exchange 2007 Email Error 451 4.7.0 Timeout waiting for client input

  - by HK1

  Our SBS 2008 server with Exchange 2007 started rejecting some (most) emails starting about 3 or 4 days ago. The return failure message looks something like this: The error that the other server returned was: 451 451 4.7.0 Timeout waiting for client input (state 18) I've rebooted our Sonicwall TZ-210 router and that doesn't make any difference. I think this problem has something to do with MTU (packet size) but I don't understand why the problem just started now. We haven't made any changes to our network infrastructure for weeks. If I ping our SonicWall (DSL connection, bridge mode) forcing unfragmented packets, I start getting packet dropouts at packet size 1320 or so. Maybe this is completely normal, I'm not sure. I haven't tried rebooting the DSL modem yet because I'm not on site. That's one of the next things I'll try.

  Read the article

• ps1xml is not digitally signed

  - by blsub6

  I'm trying to load Exchange Management Shell and it gives me a big 'ol red error that says: Import-Module : There were errors in loading the format data file: Microsoft.PowerShell, , %APPDATA%\Roaming\Microsoft\Exchange\RemotePowerShell\DOMAINNAME.format.ps1xml : File skipped because of the following validation exception: File %APPDATA%\Roaming\Microsoft\Exchange\RemotePowerShell\DOMAINNAME.format.ps1xml cannot be loaded. The file %APPDATA%\Roaming\Microsoft\ExchangeRemotePowerShell\DOMAINNAME\DOMAINNAME.format.ps1xml is not digitally signed. The script will not execute on the system. Please see "get-help about_signing" for more details... The %APPDATA% is stored on an external server on my network (that I can ping to without problems). I am missing a ton of PS cmdlets too, which I'm presuming are stored in '*.format.ps1xml' Can someone tell me where to start?

  Read the article

• Cisco ASA 5510 ASDM: Setting up multiple public static ip addresses on a single interface and route

  - by ssjaken

  HI, i have a cisco ASA 5510 using ASDM version 6.3 We have a webserver that is been written very specifically and i was given super direct "DO NOT DEVIATE" directions. This server has to get traffic from 3 different PUBLIC ip's that we own. (our isp gave use a block of 12 static addresses) on 4 different ports. there are the directions i was given externalIP1:22 - 172.17.5.50:22 - SSH externalIP1:443 - 172.17.5.50:23040 - SIT externalIP2:443 - 172.17.5.50:33040 - STAGE externalIP3:443 - 172.17.5.50:43040 - PROD My first question is, using ASDM (my contract employer demands i use ASDM over CLI) how do i get three public addresses to work on one interface. We are authenticating on PPPoE. I know create a virtual interface with the static address but when i do i cannot ping the address from another offsite machine. secondly, where would i put the traffic redirect in. would i go ahead and create ACL's or just make NAT routes. Thanks.

  Read the article

• Using a TS-Gateway through a Apache reverse-proxy

  - by Helder

  Hey all, I've set up a Windows 2008 server as Terminal Services Gateway, to funnel the RDP access to a bunch of backend servers. However, since I only need to publish SSL to the "outside", I've tried to publish it with our reverse proxy, but it's not working. The Apache box is timing out, while trying to reach the tsgateway. However, if I ping it straight from the same box, there is connectivity. I've read a bit, and with ISA 2006 you can publish TS-Gateways on the internet, so I was wondering it anyone ever got it working with an Apache reverse proxy instead :)

  Read the article

• Why isn't ICMP routing with iptables nat routing

  - by Scott Forsyth - MVP

  I'm using iptables on Ubuntu server to route a public IP to a private IP. I want to nat all traffic, including 80, 443 and ICMP. However, it appears that ICMP isn't routing. I have a steady ping going to the public IP and it never stops, even with NAT pointing to a bogus IP. Here are the rules that I'm using: iptables -t nat -I PREROUTING -d 206.72.119.76 -j DNAT --to-destination 10.240.5.5 iptables -t nat -I POSTROUTING -s 10.240.5.5 -j SNAT --to-source 206.72.119.76 I tried with rules for ICMP specifically, but no such luck: iptables -t nat -I PREROUTING -d 206.72.119.76 - icmp --icmp-type echo-request -j DNAT --to-destination 10.240.5.5 Any ideas?

  Read the article

• Slow Browsing/Direct Download, but Fast Bittorrent Download

  - by Dr Haisook

  I'm using Windows XP SP2. I have a 1 MB connection via a SpeedTouch 585, and my internet speed registers at 0.3 MB, with a maximum download of 30kbps. Not to mention a terrible ping at 500-1500. On the other hand, I get full speed in uTorrent - a bittorrent program - reaching up to 100 kbps; the way it should be. I haven't made any changes to anything. And it has been functioning well until the last month. I waited in hope that it could be an ISP issue and that it would be resolved, but their support crew did not help me with this problem either. I've tried disabling all firewalls, and all wireless connections, using different browsers, and disabling QoS. But it did not work. Me thinks it's an ISP issue, but if so, how am I getting full speed in uTorrent? Could somebody help me out with this? Thanks.

  Read the article

• using RHEL5 as a router

  - by gopikrishna7779

  Dear Sir, I am planning to use a RHEL5 installed computer as a internet connection sharing device. I mean I want to share the internet connection through it I have installed 2 Lan cards in it eth0 and eth1 eth0 Internet eth1 LAN eth0 configuration as follows ; Ipaddress : 115.252.64.187 Subnet : 255.255.255.240 Gateway : 115.252.64.177 I wrote the following entries in Vim /etc/resolv.conf nameserver 202.138.96.2 (preferred DNS Server) nameserver 202.138.103.2 (secondary DNS server) :q! then eth1 ipaddress : 192.168.1.1 subnet : 255.255.255.0 gateway : 192.168.1.1 (I am confused which gateway I need to use in the above scenario) I am unable to ping to my lan and I am able to connect to the Internet. Please let me know the sollution for this. Thanks in advance. regards, G.Gopi Krishna

  Read the article

• Double default gateway ubuntu server

  - by Elena

  Hi, I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• DD-WRT VPN error 800?

  - by MrZombie

  I have set up a router with DD-WRT Mega on my Asus WL-500gP V2, and I can't connect to the VPN service. I have set it up according to the configuration on the DD-WRT wiki, so the server IP is set to 192.168.1.1, which is the address of the router, and I set up the client addresses to be 192.168.1.20-29. My chap secrets are set up correctly, and still, I get an error 800 on windows XP. As far as I can tell, it means my network is unreachable. The server responds to ping.

  Read the article

• VPN with wrong subnet mask

  - by Philipp Schmid

  I followed these instructions on www.hottonetworking.com to set up VPN on a clean install of Windows Server 2008 SP2 (not R2 yet). When I then establish a VPN connection to that machine from a client machine (running Windows 7 RC), everything succeeds (it seems since I get a 'Connected' state in the network sharing center window), but I end up with a subnet mask (according to ipconfig /all) of 255.255.255.255 instead of 255.255.255.0. The net effect is that I don't have local network or internet capability. What additional configuration steps do I have to do to get VPN with the proper subnet mask working? Update: Using the steps outlined in the Technet article mentioned by Mr. Nimble, I was able to get internet connection. Apparently the subnet mask is not an issue as my coworker was able to connect using his VPN connection and ping the server machine by name as well.

  Read the article

• cannot ssh to computer behind a dd-wrt bridge

  - by Jayaraman

  In my home network , i have dd-wrt router in another room , which bridges wifi from main home router (linksys) to the computers wired behind dd-wrt router. Now I cannot ssh from my laptop ( connected to linksys wifi) to the computers behind dd-wrt wifi bridge. I am able to ping the individual computers behind the dd-wrt bridge. When it comes to ssh or telnet to the computers , it is blocked. What can I do to make dd-wrt bridge to open up all ports in the dd-wrt bridge ?

  Read the article

• IPSec VPN's being dropped by router and will not re-establish

  - by David Gard

  We have 3 sites, with our two remote sites connection to head office via LAN-to-LAN VPN's. All 3 sites use DrayTek 2900's with firware version v3.3.1.1_RC2 (this is a release candidate that DrayTek suggested I try, but sadly it made no difference). The only way to re-establish the VPN's once they have been dropped is to restart the router. Head office is set to dial out to both sites, with both the 'Always on' and 'Enable PING to keep alive' (pinging a server in the remote offices) options ticked. However, at random intervals the VPN's drop, logging IKE_RELEASE VPN : Dial-out Profile Index = 7, Name = Shepton (for one connection, and '6' & 'Wincanton' for the other connection). I first tried swapping the router with one at another site, and then had all three replaced, but that failed to solve the problem. Is anyone aware of anything that could cause the VPN's to drop randomly like this? Thanks.

  Read the article

• Changing default gateway on workstations connected to Windows Domain SBS server

  - by Gary B2312321321

  We have xp workstations connected onto a small business server acting as active directory/isa firewall/proxy (no dhcp). Is there a reason that after installing a 2nd firewall on the network (same subnet etc), that changing the default gateway on the workstations isnt sufficient to route inet traffic through the new firewall? A freshly setup linux box connects straight on to the alternate firewall with just ip, default gateway. dns settings. Will having ISA still active on the network confuse the process? Are there further config settings deeper down in windows that need attention? Any ideas pointers on this would be appreciated? Other info: Firewalls tried: Smoothwall and Ipcop; small ethernet netwoork 40 pcs; can ping to new firwalls from workstations; activating web proxy on new firewall and reconfiguring workstation browser works fine; Point of 2nd firewall is lack of some necessary features on ISA for a linux app; Would be nice to have some redundancy to though

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• Issues in getting Synergy setup

  - by chris

  For some reason I cannot get things working when the Linux box is the server and the macbook pro is the client. However I can get things working just fine in the inverse, unfortunately since the macbook is not the primary machine, and not powered on all the time, the later setup won't work. Here is the error that I am getting: started client connecting to '10.0.1.4': 10.0.1.4:24800 The only firewall that I have is the one on the router, so since things work with the macbook as the server I am pretty sure that is not where the problem is. Here is the .synergy.conf file section: screens Chris-MacBook-Pro: # I have tried this with the .local as well chris-archlinux.local: end section: links Chris-MacBook-Pro: right = chris-archlinux.local chris-archlinux.local: left = Chris-MacBook-Pro.local end ** Update: I should also add that I can ping the linux machine from the mac. To try get things working, I have also prevented the hosts.deny/.allow files from blocking anything. An ideas to where the problem could be?

  Read the article

• OpenVPN DNS: VPN DNS stomping local VPN

  - by Eddie Parker

  I've finally noodled with OpenVPN enough to get it working. Even better, I can mount samba drives, ping network machines through the TUN device, etc - it's all great. However, I'm noticing that if I use the following directive, then some of the machines that are normally visible by the client, on the client's side (i.e., not through the VPN) get masked with some other server out on the Internet. push "dhcp-option DNS 10.0.1.1" # Push our local DNS to clients Is there any way to avoid this, besides hacking the 'hosts' file on the client machine? Ideally I'd like to only use my VPN's DNS for machines within that domain.

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >