Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 56/391 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Problem with Macbook air automatically not acquiring free wifi network dns or router address

  - by Rumsfeld

  I have this problem when my macbook air sometimes does not connect to free wifi hotspots. When the problem happens and I try to run the diagnostics, it normally gets to yellow network settings tab. It seems that it for some reason does not acquire automatically the router or dns address. Sometimes after I shut it down and restart it magically connects to the wifi hotspot but it is very inconsistent. Anyone knows a fix for this problem?

  Read the article

• Windows 7 Won't connect to Wireless Router too far away (but still have 3 bars)

  - by Kerry

  I have found this problem a couple of times. Windows 7 with Intel AGN 5100 won't connect to a WPA2-PSK router when it's too far away. Both times I've had this happen I was in a foreign country (London and Stockholm), and both times I was upstairs while the router was downstairs. Now, it still has 2-3 bars when looking at local WiFi, but I get the "will not connect" error, and debugging doesn't help at all (it doesn't know what's wrong). I went downstairs and it connected immediately (but I need to be able to have it upstairs). My Android Cell Phone and iPad were able to connect upstairs just fine. Any suggestions?

  Read the article

• laptop and it drastically reduces the performance of my machine as the Indexer is constantly running

  - by Sakthy

  I get the below error on my laptop and it drastically reduces the performance of my machine as the Indexer is constantly running. Please identify a solution except re-installation ? Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: TQUERY.DLL, version: 7.0.7600.16385, time stamp: 0x4a5bdb21 Exception code: 0xc0000006 Fault offset: 0x0002e5c2 Faulting process id: 0xbe0 Faulting application start time: 0x01cd0752bd78cce1 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\system32\TQUERY.DLL Report Id: 16ce8a2f-7346-11e1-840a-a92a5ee507c3 EventID: 1000

  Read the article

• How can I monitor network traffic?

  - by WIndy Weather

  I have a home network with about 10 devices including BluRay player [netflix] and both windows and linux machines. I need to collect network traffic statistics so that if questions come up about how much traffic I'm using I have the answer independent of my ISP. I've looked at DD-WRT, but I see that even buying a new router that will be supported is a problem since I might get the wrong version of the hardware. I have a DIR-655 and a DIR-501 - neither of which is supported. I don't mind buying new hardware, but it looks like a crap-shoot to get one that will work. DD-WRT looks like a bad solution unless someone knows of a place to get a router that is guaranteed to work. Does someone know of an arduino or other SBC solution? I have plenty of NAT routers already, so I just need traffic statistics for external traffic. The network is GBit Ethernet inside and Cable / soon to be DSL outside. The DIR-655 only gives me "packets", not bytes transferred oddly enough. Thanks, ww

  Read the article

• SSL totally stopped working in Windows

  - by Dims

  Apparently, on my notebook, I have suddenly lost any ability to use network connections, involving SSL and/or data encryption, provided my MS: 1) remote desktop connections: Because of an error in data encryption, this session will end 2) browse HTTPS sites: Can't browse HTTPS pages. TLS error 3) communicate over WiFi, while wired is ok Is there any possible one central reason for all of these problems in Windows? Third party applications, like Putty, works fine. Is it possible to reset/repair certificate store or something in Windows?

  Read the article

• What happens when router has been set to incorrect time?

  - by iamrohitbanga

  I have a D-Link router for my home Wi-Fi network. Everyday at least once the internet suddenly goes down. I am simply not able to connect to the Wi-Fi network. If I just restart the router, it starts working. To debug the issue I logged into the admin panel and noticed the time was set to something in 2002. I have set it to the correct time. Will wait to see if that fixes the problem. In the meanwhile I want to know what can go bad when the router has been set to show an incorrect time? What are the kinds of problems expected? My Wi-Fi was working just fine most of the time, but sometimes it lost the connection. Could this be linked to the incorrect time setting?

  Read the article

• Wireless range extender throughput extremely slow.

  - by Alan B

  I've got a Belkin 54G router connected to the internet, and a Belkin range extender model F5D7132. I can get the range extender connected to the parent router SSID no problem, in repeater mode as opposed to access point mode. My Windows 7 laptop connects to the extender, which has a different SSID, and it connects with the full 5 bars. The issue is that when going through the extender internet performance is murderously slow, even getting the config pages of the extender or router is bad. When I connect directly to the router, all is well.

  Read the article

• Exploring other windows 8 machine's root

  - by moswald

  (Note, this is without a domain.) I used to be able to type start \\other_machine\c$ in PowerShell and explorer would pop up with a login dialog. Then I'd type other_machine\moswald and my password (the account is a local admin, of course) and I'm in. Now both machines have Windows 8 installed, and this no longer works (the dialog re-prompts with an "Access is denied" displayed). I've verified (through whoami) that the user is named other_machine\moswald, and I'm positive I'm typing the correct password. So what gives? (edited to include specific result)

  Read the article

• how to get ip address of a PPP(Point-to-Point Protocol) network interface?

  - by Xsmael

  I have a Linux machine with two network interfaces, and I'd like to get the IP address of the PPP interface w1g1 but it doesn't show up in ifconfig. There is a public IP on the PPP interface, but there is no internet connection, I'm trying to troubleshoot but I need to get the IP address of the interface and I can't. ifconfig : eth0 Link encap:Ethernet HWaddr 00:30:48:8D:F0:2C inet addr:192.168.2.254 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::230:48ff:fe8d:f02c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9970 errors:0 dropped:567 overruns:0 frame:0 TX packets:4338 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:1441024 (1.3 MiB) TX bytes:915814 (894.3 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:675 errors:0 dropped:0 overruns:0 frame:0 TX packets:675 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50659 (49.4 KiB) TX bytes:50659 (49.4 KiB) w1g1 Link encap:Point-to-Point Protocol UP POINTOPOINT RUNNING NOARP MTU:240 Metric:1 RX packets:748994 errors:0 dropped:0 overruns:0 frame:0 TX packets:748992 errors:0 dropped:0 overruns:0 carrier:3 collisions:0 txqueuelen:100 RX bytes:179758560 (171.4 MiB) TX bytes:179758080 (171.4 MiB) Interrupt:177 Memory:f881c400-f881e3ff w1g1 is connected to a modem by an RJ45<-Serial cable and the modem is connected to the phone line. The modem is a NOKIA DNT2Mi you can see it here Routing table : 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.254 169.254.0.0/16 dev eth0 scope link default via 192.168.2.180 dev eth0

  Read the article

• What can I do to configure my SSH such that it pauses for a flaky connection?

  - by kfmfe04

  I run ssh from OSX to a Ubuntu box - under home WIFI, everything works perfectly. However, when I ssh from certain external networks, ssh may be working fine for a minute or two and then drop due to a flaky network (diagnosed by pinging 8.8.8.8). How can I set up ssh so that it simply waits/pauses rather than drop (when dropping, I have to setup my development environment from scratch - a big hassle). EDIT When I say a bad connection, I mean, for example, ping 8.8.8.8 will work fine for a while, and then fail for 40-50 pings, and then come back on again.

  Read the article

• iptables blank after reboot

  - by theillien

  We've started encountering an issue with iptables on our RHEL 6.3 systems in that after a reboot, when the service starts, the rules are not loaded. We get the empty ruleset: [msnyder@matt-test ~]$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is in spite of the fact that we have rules defined and the service is, indeed, running. That I know because when I run service iptables start it simply drops back to the prompt. If I run service iptables restart it actually stops and then restarts the service. And, of course, if I run service iptables stop it indicates that iptables is actually stopping. Knowing that I need to restart the service, I do so and the rules load up properly. They simply don't get loaded after a reboot. Unless they get loaded differently during a reboot I don't see how our rules would be wrong. If they were, they wouldn't even load during a service restart. Has anyone else ever encountered this? EDIT: The rules are already saved in /etc/sysconfig/iptables. They are not added on the fly from the command line so service iptables save is unnecessary.

  Read the article

• Strange network traffic on my dedicated server. How to find out what is causing it

  - by valter

  I noticed a trange outgoing traffic in my dedicated server. I'd like to know how could I find out what is the reason to this. One day traffic One week traffic As you can see, there are bursts of spikes to over 20 megs of outgoing traffic. There is always a lower of outgoing data, before the burst. Is there any command I could use to know with application is causing this? Sorry I couldn't express using the best form.

  Read the article

• Slow WLAN file transfer between server and tablet

  - by user266985

  My file server is running Ubuntu 12.04 and I'm sharing files from it over samba. It is connected via gigabit ethernet. My desktop, running Windows 8.1, is also connected via gigabit ethernet. I can transfer files between the two and completely saturate that gigabit pipe. However, I just got a Surface Pro 2, and I'm trying to stream HD movies from my server to the device over WiFi. For some reason, I can't break much past 1.5MB/s transferring files over the network. I've tried streaming through XBMC and a standard file copy; no difference. To add the confusion, if I connect to my guest network and then use my VPN server (installed on the router) to access the file server, I get around 3.2MB/s. I've been running diagnostics to determine the root and I think I've found it but I have no idea what is causing it or how to fix it. Router: Asus RT-N66U Surface Pro 2 Network Card: Marvell Avastar 350N (Driver 19/09/2013 v14.69.24044.150) InSSIDer: Link Score: 100 Co-Channels: 0 Overlapping: 0 5GHz Network Channel: 48+44 iperf File Server as Server; Surface Pro 2 as Client - TCP Performance: Acceptable ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.0.90 port 5001 connected with 192.168.0.56 port 57367 [ ID] Interval Transfer Bandwidth [ 4] 0.0- 1.0 sec 10.1 MBytes 84.7 Mbits/sec [ 4] 1.0- 2.0 sec 10.4 MBytes 87.6 Mbits/sec [ 4] 2.0- 3.0 sec 10.6 MBytes 88.8 Mbits/sec [ 4] 3.0- 4.0 sec 10.7 MBytes 89.5 Mbits/sec [ 4] 4.0- 5.0 sec 10.1 MBytes 84.4 Mbits/sec [ 4] 5.0- 6.0 sec 10.2 MBytes 85.8 Mbits/sec [ 4] 6.0- 7.0 sec 7.04 MBytes 59.1 Mbits/sec [ 4] 7.0- 8.0 sec 10.8 MBytes 90.2 Mbits/sec [ 4] 8.0- 9.0 sec 10.6 MBytes 89.1 Mbits/sec [ 4] 9.0-10.0 sec 8.62 MBytes 72.3 Mbits/sec [ 4] 0.0-10.0 sec 99.2 MBytes 83.1 Mbits/sec iperf Surface Pro 2 as Server, File Server as Client Performance: Poor ------------------------------------------------------------ Client connecting to 192.168.0.56, TCP port 5001 TCP window size: 22.9 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.90 port 40233 connected with 192.168.0.56 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 1.0- 2.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 2.0- 3.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 3.0- 4.0 sec 1.25 MBytes 10.5 Mbits/sec [ 3] 4.0- 5.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 5.0- 6.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 6.0- 7.0 sec 1.38 MBytes 11.5 Mbits/sec [ 3] 7.0- 8.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 8.0- 9.0 sec 1.50 MBytes 12.6 Mbits/sec [ 3] 9.0-10.0 sec 1.62 MBytes 13.6 Mbits/sec [ 3] 0.0-10.1 sec 15.0 MBytes 12.4 Mbits/sec For some reason, it gets capped and I haven't got a clue why. Any suggestions? Edit: My link speed is reported as 270Mbps by Windows. I'm less than two metres from the router with a clear line of sight.

  Read the article

• Problems setting up VLC Sever/client streaming

  - by Ayos

  I'm trying to set up a Linux machine as the server and a Windows XP machine as the client. Both machines are connected to the same local network via a Wi-Fi router. I setup the stream with the following properties : http stream port 8080 play locally And not much else. No firewall on the windows client(Windows firewall is disabled) When I try to open network stream via the client machine(Using VLC or Windows Media Player) I get the following errors: Media Player error code : 0xC00D11B3: Encountered a network Problem. VLC Console: main warning: connection timed out access_mms error: cannot connect to 192.168.1.3:8080 main debug: no access module matching "http" could be loaded main debug: TIMER module_need() : 12625.810 ms - Total 12625.810 ms / 1 intvls (Avg 12625.809 ms) main error: open of `http://192.168.1.3:8080' failed main debug: dead input main debug: repeating item main debug: starting playback of the new playlist item main debug: resyncing on http://192.168.1.3:8080 main debug: http://192.168.1.3:8080 is at 0 main debug: creating new input thread main debug: Creating an input for 'http://192.168.1.3:8080' main debug: using timeshift granularity of 50 MiB, in path 'C:\DOCUME~1\Accer\LOCALS~1\Temp' main debug: `http://192.168.1.3:8080' gives access `http' demux `' path `192.168.1.3:8080' main debug: creating demux: access='http' demux='' location='192.168.1.3:8080' file='\\192.168.1.3:8080' main debug: looking for access_demux module: 0 candidates main debug: no access_demux module matched "http" main debug: TIMER module_need() : 0.461 ms - Total 0.461 ms / 1 intvls (Avg 0.461 ms) main debug: creating access 'http' location='192.168.1.3:8080', path='\\192.168.1.3:8080' main debug: looking for access module: 2 candidates access_http debug: http: server='192.168.1.3' port=8080 file='' main debug: net: connecting to 192.168.1.3 port 8080 qt4 debug: IM: Deleting the input main debug: TIMER input launching for 'http://192.168.1.3:8080' : 13397.979 ms - Total 13397.979 ms / 1 intvls (Avg 13397.978 ms) qt4 debug: IM: Setting an input Need Help. Thanks in advance.

  Read the article

• How to restrict access to other Wifi networks in range?

  - by meetpd

  Is there a way to access connecting to other wifi networks in range? I have an office and there are few wifi networks in range. Some of them are not password protected and invariably I get connected to that wifi first. I have talked to the person who owns that wifi. But he is somehow not listening about adding password to his network. So, is there a way I can block that Wifi network completely so that I do not connect to it? I have Win 7 and Mac at my office.

  Read the article

• Is there a free program that can detect which device on my network is causing lag?

  - by malfy

  I'm on a small business network, and rarely we experience really extreme latency. I have no idea what device might be causing the lag, and wanted to know if there was a piece of software that could detect it. I know about some softwares like wireshark, which maybe do what I'm asking? If so it's too complicated to understand. I run the program and I have no idea what I'm looking at, or what parameters to give it. So something that can monitor traffic, as well as describe it in such a way that even a not so network savvy individual can interpret.

  Read the article

• Mac OS X change IP configuration automatically by location (by Wifi network)?

  - by Seppo Sade

  Can Mac OS X be setup to automatically configure its Airport interface with a static IP address when connected to a Wifi network with a certain name, and on all other Wifi networks use DHCP? Currently I'm using the "Locations" feature of the "Network" section in System Preferences to manually switch between two IP address setups. I have a "my static IP" setup, and a default "DHCP" setup. However this requires entering System Preferences to change the Location drop-down each time when switching locations. Can this be automated? Preferably this would be done without third-party software.

  Read the article

• USB 3 to Gigabit Ethernet adapters: where are they?

  - by intuited

  I'm looking for an adapter that will let me use a USB 3 port as a Gigabit Ethernet port. This is proving surprisingly hard to find! Is there some reason why this product is either unavailable or very obscure? Is there an online shop (US/Canada) where I can buy such an item? Newegg, TigerDirect, NCIX, etc. do not seem to carry such an item. I find this surprising since it will provide at least double the bandwidth (possibly quadruple) compared to a USB 2 Ethernet adapter.

  Read the article

• Losing connection to server from several computers

  - by user3696358

  I have a PostgreSQL server running Oracle Linux. In my network I have several workstations each running different OS (Fedora, Ubuntu, Windows). Every once in a while I lose connection from the several workstations to the server while other workstations can connect with no problem. If I do service network restart from the server the problem is solved and everyone can work until the next time it returns. Any clues? Thank you, Ben.

  Read the article

• windows 7 virtual wireless adapter keeps going to sleep

  - by conners

  Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

  Read the article

• Wireless won't connect at home but works elsewhere

  - by Jenni

  My laptop connects via a wire into the modem fine and it works without any problems but it wont connect to it wirelessly, when I've taken it out places it connects fine in wifi area's! Also my son has his Wii connected wirelessly to it from his room upstairs without any problems, so I'm not sure where the problem lies, it hasn't worked since we got the modem it did on our old one and phoning Sky is just a waste of time they dont seem to know either and I just keep getting passed round departments repeating myself!

  Read the article

• Can I use squid (or anything) to do this?

  - by user269334

  I have a really crappy VPS, and a really good computer at my office (with a really good internet connection), but behind a NAT. Is it possible to expose my good computer by doing this: 1. The good computer connects to the VPS (and keeps the connection alive) 2. The users connects to the VPS, and sends http(s) requests to the VPS. 3. The VPS just passes that http(s) requests to the good computer (including some identifications, so the servers can distinguish connections) 4. The good computer passes that http(s) response to the VPS 5. In turn, the VPS receives the http(s) response, and passes back to the client. Is it possible to do this? (btw, the VPS and the good computer are located in different countries) And also, is this "reverse proxy"? I heard that reverse proxy is for protecting the internal network by putting a middle server. And will this affect SSL configurations? (or make SSL impossible?) I'm intending to run nginx on the good computer. Thanks in advance : )

  Read the article

• How to share a internet connection in a network with openSuse 12.2?

  - by eneepo

  I have to computer and opensuse 12.2 on both of them: Internet 192.168.2.1 | eth0 eth1 First Computer 192.168.2.2 192.168.2.10 | eth0 Second Computer 192.168.2.11 I am following the instruction on http://www.swerdna.net.au/suseics.html but as soon as I enable eth1 on first computer I lose connection with internet. I follow all the instructions I don't know which part I'm miss-configuring.

  Read the article

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

• Internet connection resets (wifi), no device has wifi for moment

  - by Gizmo

  I have a few devices setup and I noticed this happens with both my old and new router (two different vendors&models) This happens occasionally, and I tried wireshark today and this cought my attention: No. Time Source Destination Protocol Length Info 69 6.464423000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.4? Tell 0.0.0.0 73 7.451146000 LiteonTe_59:65:94 Arcadyan_e1:8c:cf ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 85 9.450443000 LiteonTe_59:65:94 Arcadyan_e1:8c:cf ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 91 10.521000000 LiteonTe_59:65:94 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.1 93 10.860953000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.4 97 11.099463000 LiteonTe_7f:64:30 Broadcast ARP 42 Who has 192.168.2.254? Tell 192.168.2.4 where 192.168.2.254 is the gateway/router, 192.168.2.1 my laptop ip and 192.168.2.4 my sisters laptop.. what's happening here?

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >