Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 59/391 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

  • Setting reply priority on Wifi network with QoS?

    - by Omega
    When using a Station and Access Point that support QoS over Wifi, is it possible to set the priority (= Traffic Identifier = TID = QoS channel) of the reply? For example when sending a ICMP ping request using a high priority (= QoS channel), is it possible to force the station to use that same priority (= QoS channel) when sending the reply? A related question: Is it possible to force the station into using a different QoS channel?

    Read the article

  • Setting reply priority on Wifi network with QoS?

    - by Omega
    When using a Station and Access Point that support QoS over Wifi, is it possible to set the priority (= Traffic Identifier = TID = QoS channel) of the reply? For example when sending a ICMP ping request using a high priority (= QoS channel), is it possible to force the station to use that same priority (= QoS channel) when sending the reply? A related question: Is it possible to force the station into using a different QoS channel?

    Read the article

  • How to blacklist a problem wifi access point by MAC address in OSX

    - by Sam Alexander
    So I am a small mac-user cog in a larger windows-based network machine. The network here works fine for most everyone else (on PCs), but I have random timeouts and issues with the Wifi. Luckily, I have identified a few problem access points by MAC address (via their log messages in Console.app). Is it possible to tell my Airport on my Macbook to avoid those access points, and only speak with the access points who are far less touchy about me drinking the Apple kool-aid? All of the points are on the same network SSID.

    Read the article

  • Looking for cheap Wireless router, with USB for attached USB disk drive

    - by geoffc
    I have a 802.11b router at home (DLink DI-614+ (B rev)) and it is working perfectly well for me. I want to replace it though, since it is out of updates, and now several years old and heck, I want a new toy to configure! I was trying to decide what to get. I could care less about 802.11g or n support, since B is fast enough, but every device in my house is now B/G, so G would be fine for me. N buys me little to nothing. (Small enough house that range is a non-issue). The features I realized I want are a USB port for sharing a USB hard drive. I would like to have a central device I could store files on. I do not want to waste the power of an always running PC to do this, so a router seems like the place to go. I would love it, if it could support Vonage VOIP as well, then I could ditch a power brick from a second device (I have the small DLink Vonage VOIP box). All the current examples of this router (with USB drive, yet to find one with VOIP too!) are in the $100+ range, and N and silly, when a B/G is in the $30 range around here.

    Read the article

  • Dual NIC internet access

    - by JavaRocky
    Q1. If a computer had two NICs, lets say windows, on which interface would HTTP traffic (or any for that matter) go out on. Not sure how the routes table would look like. Q2. If one of the NICs link becomes unresponsive, would traffic be automatically routed to the other NIC? Thanks.

    Read the article

  • Bad ways to secure wireless network c

    - by Moshe
    I was wondering if anybody had any thoughts on this, as I recently saw a Verizon DSL network set up where the WEP key was the last 8 characters of the router's MAC address. (It's bad enough that hey were using WEP in the first place...)

    Read the article

  • wrt54gl reboots; troubleshooting steps?

    - by Bill
    I am using about 10 wrt54gl's in a small school. I am using a combination of stock firmware and Tomato 1.25, slowly moving towards all Tomato. We have had these devices installed for several years without problems. Recently, more and more of the units have started to spontaneously reboot, usually during high-traffic times (but not always). For the most part, the rebooting is not critical for us, but the wrt54gl's temporarily revert to 192.168.1.1 on the LAN ethernet ports and conflict with a critical server that's already installed with that IP. (Yes -- we plan to move the server off that address, but it is an involved process.) Both Tomato and the stock firmware (several versions from recent to several years old) exhibit the same problem: random reboots and reverting to 192.168.1.1 and conflicting temporarily with our server until the firmware boot process finishes. Here are my questions: Any way to prevent the wrt54gl's from reverting to 192.168.1.1 during the boot process? I was thinking of doing a custom firmware mod, although I hate to go that direction. Any steps to take in troubleshooting the reboots? Only some of the wrt54gl's reboot, which is odd. Others stay online for weeks and months without issues. Thanks.

    Read the article

  • Linux Mint Wireless doesn't connect [migrated]

    - by guisantogui
    I'm having a great problem, I've installed Linux mint debian edition (LMDE), and following this tutorial http://community.linuxmint.com/tutorial/view/161 I did installed the network driver. The available connections appears to me, but when i try to connect to my connection at first time, I got this message: "(4) Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." And the following tries, I got this another message: "(32) Insufficient privileges." I'm accepting ideas. Thanks.

    Read the article

  • Configuring a Genius GW-7200 Access Point

    - by alex
    I came across an access point we had a few years ago. I'm now trying to get it set up to work on our network. here are a couple of pictures: http://twitpic.com/194u06/full http://twitpic.com/194u0v/full I have plugged this into our network via the network port on the back. I set up a DHCP reservation, based on the MAC address on the back of the access point, however I cannot ping it, nor access the web interface. I've held down the reset button for 10 seconds, to see if that would do anything. Google doesn't come up with anything on the matter :-(

    Read the article

  • Mac download speed keeps decreasing

    - by hatorade
    I have a Mac that is getting extremely low connection speed from my WiFi. The other 3 computers in this house have a fast connection. However, on this Mac, once I connect to WiFi it's fast, but as time goes on the speed decreases dramatically. I thought it was the browser or something (Safari) so I downloaded Firefox, but I have watched the download speed decrease consistently as time goes by and right now it's at 8kb/sec instead of the 60-200 range it started at. Any suggestions?

    Read the article

  • How to access internet from 2 laptops with data card plugged-in in one of the machine?

    - by learnerforever
    Hi, I have 2 laptops - one running Windows XP and other running Vista. Both have wifi card.I have one Reliance broadband data card. I want to be able to access internet on both the machines simultaneously using this one data card. Please help. I think, there would be many many ways to do it. I do have some linksys router but any simple quick way without any extra hardware? like we could set up p2p or WLAN between these 2 machines, because both have wifi card so we shouldn't compulsorily need any extra hardware(?) I am fine with connecting data card to either of the machines. Thanks,

    Read the article

  • Edimax wireless router is not providing DNS services correctly

    - by Nathan Fellman
    I have an Edimax router that is set up to connect to the internet via L2TP on cable, and on the LAN side it's set up as a DHCP server. The DHCP server gives correct IP addresses, but it sets itself up as the DNS server. However, it doesn't provide the DNS service. I am sure that it's a problem with the router, because I have two computers on the network with the same problem. I see that on the WAN side it gets correct DNS addresses from the ISP, so I'd expect the router to either pass these addresses through to the DHCP clients, or to serve the DNS requests itself by forwarding them to the ISP's DNS. However, it apparently does neither, and there is no DNS. I switched from ADSL to cable last week. On ADSL it connected using PPPoE, and the DNS worked fine. What can be the problem here?

    Read the article

  • Analyze a wireless network that constantly drops/has speed issues

    - by Eddie Parker
    Hello, I'm curious what the best tools are to use for analyzing problems with a WiFi network. Here's the scenario: I have a WiFi router (Belkin N+) that's setup in AP mode. I have three RT-N13U's that I've purchased to use as 'repeaters', but I've had so many problems when more than one of them is running (bad routes) that I've only got one active. Sometimes certain boxes on my network can't talk to others, and drops are quite frequent and quite aggravating. I'm running Mac, Windows, and Linux (Gentoo) boxes on this network, so any software, or steps I should take that work for any of those boxes should be sufficient. Apologies if this is answered somewhere else - I'll close it as a dupe if so.

    Read the article

  • Best dual band A/B/G/N wireless router/ap for Linux

    - by Kevin Bowling
    Hello, I am looking for the best A/B/G/N dual band (simultaneous) router or access point that can be flashed with community firmware like dd-wrt or openwrt. In the past I have used the WRT54G series from Linksys with great success as access points and bridges. The WRT610N looks nice but I'm not sure how well the community firmwares support it. I am open to any manufacturer and any input or experience would be appreciated.

    Read the article

  • iPod Touch G4 disconnects from Belkin N+ Router at random intervals

    - by leeand00
    I have an iPod Touch G4 and a Belkin N+ Router F5D8235-4 v2, and for some reason the iPod Touch disconnects from the router at random intervals. Checking the settings in the iPod, it will read that it is still connected to the router, but before I can access the internet again, I have to turn on Airplane mode and then turn it off again to get any program to work with the Internet again. I've tried upgrading the firmware in the router, but that also doesn't seem to help. I'm using the wiresless mode 802.11b&802.11g&802.11n in the 20/40MHz frequency. Is there any way of fixing this issue? It doesn't happen with any of the other devices that are connected to the router. This post has been cross-posted here

    Read the article

  • What is a good custom MAC address? [closed]

    - by rausch
    My new notebook has been dropping the WiFi connection infrequently. The reason was, that my PS3 had the same MAC address. I changed the MAC address of my notebook and the WiFi is now stable. At first I just reduced the address' last block by 1, which happened to be the MAC address of another device. I reduced it again and for now it's fine. In order to avoid conflicts in the future, is there an address range that is safe to use for custom/non-vendor MAC addresses?

    Read the article

  • Ubuntu Studio 9.10 wireless doesn't work [closed]

    - by eric
    I just bought a brand new laptop. At first I was using Windows 7 and decided to switch to Ubuntu Studio 9.10 on my Studio Dell. My ethernet card is a Netlink. I do not have any connection at all to the internet, only when I plug the wire to my computer. I've tried a lot of stuff; nothing works. Can you help me please?

    Read the article

  • How to setup a Wi-Fi 2-computer network with Internet sharing?

    - by Narek
    I have the following devices: Desktop Computer (Windows XP Professional) Laptop Computer (Windows Vista Home Premium) A USB modem that I want to connect to my Desktop computer (so my Desktop has Internet) And a Wi-Fi router (D-Link, model: DIR-300) that I want to use in order to create a connection between mentioned two computers to be able to share files and what is the most important thing to make my laptop to have access to the Internet. What steps I should do to have this system?

    Read the article

  • Why is my ipad's wireless so flakey?

    - by Mark
    I'm the proud owner of a new IPad here in the UK. All is good, except for the wifi, which is a bit flakey. It connects fine to my Draytek router which is set for WPA/WPA2 and 56g only, displaying full signal strength. Then, after a few minutes, it goes down to minimum strength... And sometimes it goes back up again. A few times, it seems to loose connection completely, and needs to be turned off and on again. I've looked at the Apple support site, and have tried their recommendations (which are not really very relevant), but still nothing. I've tried setting the router to wpa2 only, and setting long-preamble. Right now, I guess I want to know if it's a hardware problem with my device and should be returned, or if it's a problem with all ipads which will be resolved. Guess I could take it back to the Mac genius bar, but I find those guys so incredibly pretentious and, frankly, rather useless, that i'd rather wait until I've exercised other options!

    Read the article

  • Bad ways to secure wireless network.

    - by Moshe
    I was wondering if anybody had any thoughts on this, as I recently saw a Verizon DSL network set up where the WEP key was the last 8 characters of the router's MAC address. (It's bad enough that hey were using WEP in the first place...)

    Read the article

  • Planning home network

    - by gakhov
    I'm planning to setup my home network from scratch and want to ask professional opinions or tips. My home is connected to Internet with a cable connection (100 Mb/s). The devices I would like to connect are VoIP phone (RJ-45), TV (WiFi/LAN), 3 laptops (WiFi), 2 smartphones (WiFi), an iPad (WiFi), a Kindle (WiFi), a network printer and, probably, a home media storage (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, I need help to choose the best router (or combination of routers) to support stable connections for all these devices and minimize the total number of routers/adapters. I like how Cisco/Linksys devices were working for me in the past, so preferably (but not obligatorily) I want to setup network with their solutions. Any thoughts?

    Read the article

  • Can't access certain specific IP/domain on Windows 7

    - by jfrobishow
    Been banging my head on the wall for some time now. I have a fresh install of Windows 7 - Ultimate ~x86. Some IPs can't resolve properly, it doesn't matter if I try using Firefox, Chrome or IE I end up with a domain not found (server not found, etc.) I am behind a router, all the other computers aren't affected only this Win 7 machine. It's only certain sites. e.g. xkcd.com, facebook's cdn, google group. Things I have tried: flushdns ipconfig renew Disable IP v6 on the NIC Double checked that the computer was in the right timezone @ the right time. Reinstall the NIC driver. Again 90% of the sites will work but not the major one :P help!!!

    Read the article

  • My wifi internet router connection resets when more devices connected

    - by joeeoj
    The wifi internet router is connected directly to Internet cable. The main Pc is attached to it via LAN cable, while 1 laptop and 3 mobile phones connect to it via wifi. Whenever 2 or more devices connect via wifi, the internet connection breaks after one minute and internet connection resets. I tracked this behaviour for weeks, and came to conclusion: It seems like some 'device 1' got IP then it went to suspend mode. Then 'device 2' connected to router and got the same IP. Then the 'device 1' woke up from suspend mode and tried to use his old IP. The router sees that 2 same IP addresses exists and automatically reset internet connection. Is this possible? Have I tracked the problem correctly and how to solve it? The router is set to lease 100 IP addresses to devices who try to connect. The password is strong and no hacker's device is being connected to my wifi network. Tried changing password and AP's name.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >