Search Results

Search found 50650 results on 2026 pages for 'html select'.

Page 560/2026 | < Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567  | Next Page >

• Adding a Network Loopback Adapter to Windows 8

  - by Greg Low

  I have to say that I continue to be frustrated with finding out how to do things in Windows 8. Here's another one and it's recorded so it might help someone else. I've also documented what I tried so that if anyone from the product group ever reads this, they'll understand how I searched for it and might try to make it easier.I wanted to add a network loopback adapter, to have a fixed IP address to work with when using an "internal" network with Hyper-V. (The fact that I even need to do this is also painful. I don't know why Hyper-V can't make it easy to work with host system folders, etc. as easily as I can with VirtualPC, VirtualBox, etc. but that's a topic for another day).In the end, what I needed was a known IP address on the same network that my guest OS was using, via the internal network (which allows connectivity from the host OS to/from guest OS's).I started by looking in the network adapters areas but there is no "add" functionality there. Realising that this was likely to be another unexpected challenge, I resorted to searching for info on doing this. I found KB article 2777200 entitled "Installing the Microsoft Loopback Adapter in Windows 8 and Windows Server 2012". Aha, I thought that's what I'd need. It describes the symptom as "You are trying to install the Microsoft Loopback Adapter, but are unable to find it." and that certainly sounded like me. There's a certain irony in documenting that something's hard to find instead of making it easier to find. Anyway, you'd hope that in that article, they'd then provide a step by step example of how to do it, but what they supply is this: The Microsoft Loopback Adapter was renamed in Windows 8 and Windows Server 2012. The new name is "Microsoft KM-TEST Loopback Adapter". When using the Add Hardware Wizard to manually add a network adapter, choose Manufacturer "Microsoft" and choose network adapter "Microsoft KM-TEST Loopback Adapter".The trick with this of course is finding the "Add Hardware Wizard". In Control Panel -> Hardware and Sound, there are options to "Add a device" and for "Device Manager". I tried the "Add a device" wizard (seemed logical to me) but after that wizard tries it's best, it just tells you that there isn't any hardware that it thinks it needs to install. It offers a link for when you can't find what you're looking for, but that leads to a generic help page that tells you how to do things like turning on your printer.In Device Manager, I checked the options in the program menus, and nothing useful was present. I even tried right-clicking "Network adapters", hoping that would lead to an option to add one, also to no avail.So back to the search engine I went, to try to find out where the "Add Hardware Wizard" is. Turns out I was in the right place in Device Manager, but I needed to right-click the computer's name, and choose "Add Legacy Hardware". No doubt that hasn't changed location lately but it's a while since I needed to add one so I'd forgotten. Regardless, I'm left wondering why it couldn't be in the menu as well.Anyway, for a step by step list, you need to do the following:1. From Control Panel, select "Device Manager" under the "Devices and Printers" section of the "Hardware and Sound" tab.2. Right-click the name of the computer at the top of the tree, and choose "Add Legacy Hardware".3. In the "Welcome to the Add Hardware Wizard" window, click Next.4. In the "The wizard can help you install other hardware" window, choose "Install the hardware that I manually select from a list" option and click Next.5. In the "The wizard did not find any new hardware on your computer" window, click Next.6. In the "From the list below, select the type of hardware you are installing" window, select "Network Adapters" from the list, and click Next.7. In the "Select Network Adapter" window, from the Manufacturer list, choose Microsoft, then in the Network Adapter window, choose "Microsoft KM-TEST Loopback Adapter", then click Next.8. In the "The wizard is ready to install your hardware" window, click Next.9. In the "Completing the Add Hardware Wizard" window, click Finish.Then you need to continue to set the IP address, etc.10. Back in Control Panel, select the "Network and Internet" tab, click "View Network Status and Tasks".11. In the "View your basic network information and set up connections" window, click "Change adapter settings".12. Right-click the new adapter that has been added (find it in the list by checking the device name of "Microsoft KM-TEST Loopback Adapter"), and click Properties.   

  Read the article

• The JavaOne 2012 Sunday Technical Keynote

  - by Janice J. Heiss

  At the JavaOne 2012 Sunday Technical Keynote, held at the Masonic Auditorium, Mark Reinhold, Chief Architect, Java Platform Group, stated that they were going to do things a bit differently--"rather than 20 minutes of SE, and 20 minutes of FX, and 20 minutes of EE, we're going to mix it up a little," he said. "For much of it, we're going to be showing a single application, to show off some of the great work that's been done in the last year, and how Java can scale well--from the cloud all the way down to some very small embedded devices, and how JavaFX scales right along with it."Richard Bair and Jasper Potts from the JavaFX team demonstrated a JavaOne schedule builder application with impressive navigation, animation, pop-overs, and transitions. They noted that the application runs seamlessly on either Windows or Macs, running Java 7. They then ran the same application on an Ubuntu Linux machine--"it just works," said Blair.The JavaFX duo next put the recently released JavaFX Scene Builder through its paces -- dragging and dropping various image assets to build the application's UI, then fine tuning a CSS file for the finished look and feel. Among many other new features, in the past six months, JavaFX has released support for H.264 and HTTP live streaming, "so you can get all the real media playing inside your JavaFX application," said Bair. And in their developer preview builds of JavaFX 8, they've now split the rendering thread from the UI thread, to better take advantage of multi-core architectures.Next, Brian Goetz, Java Language Architect, explored language and library features planned for Java SE 8, including Lambda expressions and better parallel libraries. These feature changes both simplify code and free-up libraries to more effectively use parallelism. "It's currently still a lot of work to convert an application from serial to parallel," noted Goetz.Reinhold had previously boasted of Java scaling down to "small embedded devices," so Blair and Potts next ran their schedule builder application on a small embedded PandaBoard system with an OMAP4 chip set. Connected to a touch screen, the embedded board ran the same JavaFX application previously seen on the desktop systems, but now running on Java SE Embedded. (The systems can be seen and tried at four of the nearby JavaOne hotels.) Bob Vandette, Java Embedded Architect, then displayed a $25 Rasberry Pi ARM-based system running Java SE Embedded, noting the even greater need for the platform independence of Java in such highly varied embedded processor spaces. Reinhold and Vandetta discussed Project Jigsaw, the planned modularization of the Java SE platform, and its deferral from the Java 8 release to Java 9. Reinhold demonstrated the promise of Jigsaw by running a modularized demo version of the earlier schedule builder application on the resource constrained Rasberry Pi system--although the demo gods were not smiling down, and the application ultimately crashed.Reinhold urged developers to become involved in the Java 8 development process--getting the weekly builds, trying out their current code, and trying out the new features:http://openjdk.java.net/projects/jdk8http://openjdk.java.net/projects/jdk8/spechttp://jdk8.java.netFrom there, Arun Gupta explored Java EE. The primary themes of Java EE 7, Gupta stated, will be greater productivity, and HTML 5 functionality (WebSocket, JSON, and HTML 5 forms). Part of the planned productivity increase of the release will come from a reduction in writing boilerplate code--through the widespread use of dependency injection in the platform, along with default data sources and default connection factories. Gupta noted the inclusion of JAX-RS in the web profile, the changes and improvements found in JMS 2.0, as well as enhancements to Java EE 7 in terms of JPA 2.1 and EJB 3.2. GlassFish 4 is the reference implementation of Java EE 7, and currently includes WebSocket, JSON, JAX-RS 2.0, JMS 2.0, and more. The final release is targeted for Q2, 2013. Looking forward to Java EE 8, Gupta explored how the platform will provide multi-tenancy for applications, modularity based on Jigsaw, and cloud architecture. Meanwhile, Project Avatar is the group's incubator project for designing an end-to-end framework for building HTML 5 applications. Santiago Pericas-Geertsen joined Gupta to demonstrate their "Angry Bids" auction/live-bid/chat application using many of the enhancements of Java EE 7, along with an Avatar HTML 5 infrastructure, and running on the GlassFish reference implementation.Finally, Gupta covered Project Easel, an advanced tooling capability in NetBeans for HTML5. John Ceccarelli, NetBeans Engineering Director, joined Gupta to demonstrate creating an HTML 5 project from within NetBeans--formatting the project for both desktop and smartphone implementations. Ceccarelli noted that NetBeans 7.3 beta will be released later this week, and will include support for creating such HTML 5 project types. Gupta directed conference attendees to: http://glassfish.org/javaone2012 for everything about Java EE and GlassFish at JavaOne 2012.

  Read the article

• How to create an Access database by using ADOX and Visual C# .NET

  - by SAMIR BHOGAYTA

  Build an Access Database 1. Open a new Visual C# .NET console application. 2. In Solution Explorer, right-click the References node and select Add Reference. 3. On the COM tab, select Microsoft ADO Ext. 2.7 for DDL and Security, click Select to add it to the Selected Components, and then click OK. 4. Delete all of the code from the code window for Class1.cs. 5. Paste the following code into the code window: using System; using ADOX; private void btnCreate_Click(object sender, EventArgs e) { ADOX.CatalogClass cat = new ADOX.CatalogClass(); cat.Create("Provider=Microsoft.Jet.OLEDB.4.0;" +"Data Source=D:\\NewMDB.mdb;" +"Jet OLEDB:Engine Type=5"); MessageBox.Show("Database Created Successfully"); cat = null; }

  Read the article

• How to change the default editor of a specific file type in JDeveloper

  - by [email protected]

  When you open a file in JDeveloper, the mode that is used as the default might not be what you as a developer want.  If, for example, every time you open a .jsp(x) file you click on the source tab at the bottom of the window so that you can edit the jsp(x) file in source code mode, you may want to consider changing the default editor for that file type.  This is easy to do in the JDeveloper tool preferences and can be a time saver in the long run, since some editors can take a while to start up and if you don't need them often, this would just be lost time.  Here are the steps:  From the JDeveloper menu, select Tools->Preferences...Select "File Types" in the tree component on the left side of the preferences dialog.Click on the "Default Editors" tab.Scroll to the file type you want to change.In the details section at the bottom of the dialog, use the "Default Editor" select list to change the default to your liking.

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Send Port

  - by Stuart Brierley

  I have previously talked about the installation of the Community ODBC adapter and also using the ODBC adapter to generate schemas and laterly the creation of a receive port using the ODBC Adapter.  But what about creating a send port? Select to add a new Send Port, select the ODBC Adapter and click configure. Clicking Connection string will open the DataSource window. Choose one of your system datasources and press OK. This will now update the Transport properties.  Select okay. All that remains is to set the standard send port properties and your ODBC send port is now ready.

  Read the article

• Creating an anonymous site in SharePoint 2010

  - by shehan

  Here’s how: Open up the Central Administration site and click on “Manage Web Applications” under the “Application Management” section From the ribbon click on “New” (Note: if its an existing web app, then click on “Extend”) Fill in the fields with appropriate values. Under “Security Configurations” make sure to select “Yes” for “Allow Anonymous” Click OK Once the web application has been created, a site collection would need to be created. Navigate to “Application Management” –> “Create Site Collection” Fill in the fields with the appropriate values and create the site collection Next sign into the newly created site collection as the Site Collection Administrator. From the “Site Actions” menu, select “Site Permissions” In the permissions page that loads, click on the Anonymous Access button appearing on the ribbon. A modal dialog would popup. Select the appropriate option and click OK. If you selected “Entire Web Site” its advisable to restart the browser to test anonymous access Technorati Tags: SharePoint 2010,anonymous,site collection,web application

  Read the article

• How do I do JavaScript Array Animation

  - by Henry

  I'm making a game but don't know how to do Array Animation with the png Array and game Surface that I made below. I'm trying to make it so that when the Right arrow key is pressed, the character animates as if it is walking to the right and when the Left arrow key is pressed it animates as if it is walking to the left (kind of like Mario). I put everything on a surface instead of the canvas. Everything is explained in the code below. I couldn't find help on this anywhere. I hope what I got below makes sense. I'm basically a beginner with JavaScript. I'll be back if more is needed: <!doctype html5> <html> <head></head> <script src="graphics.js"></script> <script src="object.js"></script> <body onkeydown ="keyDown(event)" onkeyup ="keyUp(event)" ></body> <script> //"Surface" is where I want to display my animation. It's like the HTML // canvas but it's not that. It's just the surface to where everything in the //game and the game itself will be displayed. var Surface = new Graphics(600, 400, "skyblue"); //here's the array that I want to use for animation var player = new Array("StandsRight.png", "WalksRight.png", "StandsLeft.png","WalksLeft.png" ); //Here is the X coordinate, Y coordinate, the beginning png for the animation, //and the object's name "player." I also turned the array into an object (but //I don't know if I was supposed to do that or not). var player = new Object(50, 100, 40, 115, "StandsRight.png","player"); //When doing animation I know that it requires a "loop", but I don't // know how to connect it so that it works with the arrays so that //it could animate. var loop = 0; //this actually puts "player" on screen. It makes player visible and //it is where I would like the animation to occur. Surface.drawObject(player); //this would be the key that makes "player" animation in the righward direction function keyDown(e) { if (e.keyCode == 39); } //this would be the key that makes "player" animation in the leftward direction function keyUp(e){ if (e.keyCode == 39); } //this is the Mainloop where the game will function MainLoop(); //the mainloop functionized function MainLoop(){ //this is how fast or slow I could want the entire game to go setTimeout(MainLoop, 10); } </script> </html> From here, are the "graphic.js" and the "object.js" files below. In this section is the graphics.js file. This graphics.js part below is linked to the: script src="graphics.js" html script section that I wrote above. Basically, below is a seperate file that I used for Graphics, and to run the code above, make this graphics.js code that I post below here, a separate filed called: graphics.js function Graphics(w,h,c) { document.body.innerHTML += "<table style='position:absolute;font- size:0;top:0;left:0;border-spacing:0;border- width:0;width:"+w+";height:"+h+";background-color:"+c+";' border=1><tr><td> </table>\n"; this.drawRectangle = function(x,y,w,h,c,n) { document.body.innerHTML += "<div style='position:absolute;font-size:0;left:" + x + ";top:" + y + ";width:" + w + ";height:" + h + ";background-color:" + c + ";' id='" + n + "'></div>\n"; } this.drawTexture = function(x,y,w,h,t,n) { document.body.innerHTML += "<img style='position:absolute;font-size:0;left:" + x + ";top:" + y + ";width:" + w + ";height:" + h + ";' id='" + n + "' src='" + t + "'> </img>\n"; } this.drawObject = function(o) { document.body.innerHTML += "<img style='position:absolute;font-size:0;left:" + o.X + ";top:" + o.Y + ";width:" + o.Width + ";height:" + o.Height + ";' id='" + o.Name + "' src='" + o.Sprite + "'></img>\n"; } this.moveGraphic = function(x,y,n) { document.getElementById(n).style.left = x; document.getElementById(n).style.top = y; } this.removeGraphic = function(n){ document.getElementById(n).parentNode.removeChild(document.getElementById(n)); } } Finally, is the object.js file linked to the script src="object.js"" in the html game file above the graphics.js part I just wrote. Basically, this is a separate file too, so thus, in order to run or test the html game code in the very first section I wrote, a person has to also make this code below a separate file called: object.js I hope this helps: function Object(x,y,w,h,t,n) { this.X = x; this.Y = y; this.Velocity_X = 0; this.Velocity_Y = 0; this.Previous_X = 0; this.Previous_Y = 0; this.Width = w; this.Height = h; this.Sprite = t; this.Name = n; this.Exists = true; } In all, this game is made based on a tutorial on youtube at: http://www.youtube.com/watch?v=t2kUzgFM4lY&feature=relmfu I'm just trying to learn how to add animations with it now. I hope the above helps. If not, let me know. Thanks

  Read the article

• Upgrading Agent Controllers in Oracle Enterprise Manager Ops Center 12c

  - by S Stelting

  Oracle Enterprise Manager Ops Center 12c recently released an upgrade for Solaris Agent Controllers. In this week's blog post, we'll show you how to upgrade agent controllers. Detailed instructions about upgrading Agent Controllers are available in the product documentation here. This blog post uses an Enterprise Controller which is configured for connected mode operation. If you'd like to apply the agent update in a disconnected installation, additional instructions are available here. Step 1: Download Agent Controller Updates With a connected mode Ops Center installation, you can check for product updates at any time by selecting the Enterprise Controller from the left-hand Administration navigation tab. Select the right-hand Action link “Ops Center Downloads” to open a pop-up dialog displaying any new product updates. In this example, the Enterprise Controller has already been upgraded to the latest version (Update 1, also shown as build version 2076) so only the Agent Controller updates will appear. There are three updates available: one for Solaris 10 X86, one for Solaris 8-10 SPARC, and one for all versions of Solaris 11. Note that the last update in the screen shot is the Solaris 11 update; for details on any of the downloads, place your mouse over the information icon under the details column for a pop-up text region. Select the software to download and click the Next button to display the Ops Center license agreement. Review and click the check box to accept the license agreement, then click the Next button to begin downloading the software. The status screen shows the current download status. If desired, you can perform the downloads as a background job. Simply click the check box, then click the next button to proceed to the summary screen. The summary screen shows the updates to be downloaded as well as the current status. Clicking the Finish button will close the dialog and return to the Browser UI. The download job will continue to run in Ops Center and progress can still be viewed from the jobs menu at the bottom of the browser window. Step 2: Check the Version of Existing Agent Controllers After the download job completes, you can check the availability of agent updates as well as the current versions of your Agent Controllers from the left-hand Assets navigation tab. Select “Operating Systems” from the pull-down tab lets to display only OS assets. Next, select “Solaris” in the left-hand tab to display the Solaris assets. Finally, select the Summary tab in the center display panel to show which versions of agent controllers are installed in your data center. Notice that a few of the OS assets are not displayed in the Agent Controllers tab. Ops Center will not display OS instances which do not have an Agent Controller installation. This includes Enterprise Controllers and Proxy Controllers (unless the agent has been activated on the OS instance) and and OS instances using agentless management. For Agent Controllers which support an update, the version of agent software (in this example, 2083) appears to the right of the currently installed version. Step 3: Upgrade Your Agent Controllers If desired, you can upgrade agent controllers from the previous screen by selecting the desired systems and clicking the upgrade button. Alternatively, you can click the link “Upgrade All Agent Controllers” in the right-hand Actions menu: In either case, a pop-up dialog lets you start the upgrade process. The first screen in the dialog lets you choose the upgrade method: Ops Center provides three ways to upgrade agent controllers: Automatic Upgrade: If Agent Controllers are running on all assets, Ops Center can automatically upgrade the software to the latest version without requiring any login credentials to the system SSH using a single set of credentials: If all assets use the same login credentials, you can apply a single set to all assets for the upgrade process. The log-in credentials are the same ones used for asset discovery and management, which are stored in the Plan Management navigation tab under Credentials. SSH using individual credentials: If assets use different login credentials, you can select a different set for each asset. After selecting the upgrade method, click the Next button to proceed to the summary screen. Click the Finish button to close the pop-up dialog and start the upgrade job for the agent controllers. The upgrade job runs a series of tasks in parallel, and will upgrade all agents which have been selected. Once the job completes, the OS instances in your data center will be upgraded and running the latest version of Agent Controller software.

  Read the article

• Working with packed dates in SSIS

  - by Jim Giercyk

  One of the challenges recently thrown my way was to read an EBCDIC flat file, decode packed dates, and insert the dates into a SQL table.  For those unfamiliar with packed data, it is a way to store data at the nibble level (half a byte), and was often used by mainframe programmers to conserve storage space.  In the case of my input file, the dates were 2 bytes long and  represented the number of days that have past since 01/01/1950.  My first thought was, in the words of Scooby, Hmmmmph?  But, I love a good challenge, so I dove in. Reading in the flat file was rather simple.  The only difference between reading an EBCDIC and an ASCII file is the Code Page option in the connection manager.  In my case, I needed to use Code Page 1140 for EBCDIC (I could have also used Code Page 37).       Once the code page is set correctly, SSIS can understand what it is reading and it will convert the output to the default code page, 1252.  However, packed data is either unreadable or produces non-alphabetic characters, as we can see in the preview window.   Column 1 is actually the packed date, columns 0 and 2 are the values in the rest of the file.  We are only interested in Column 1, which is a 2 byte field representing a packed date.  We know that 2 bytes of packed data can be stored in 1 byte of character data, so we are working with 4 packed digits in 2 character bytes.  If you are confused, stay tuned….this will make sense in a minute.   Right-click on your Flat File Source shape and select “Show Advanced Editor”. Here is where the magic begins. By changing the properties of the output columns, we can access the packed digits from each byte. By default, the Output Column data type is DT_STR. Since we want to look at the bytes individually and not the entire string, change the data type to DT_BYTES. Next, and most important, set UseBinaryFormat to TRUE. This will write the HEX VALUES of the output string instead of writing the character values.  Now we are getting somewhere! Next, you will need to use a Data Conversion shape in your Data Flow to transform the 2 position byte stream to a 4 position Unicode string containing the packed data.  You need the string to be 4 bytes long because it will contain the 4 packed digits.  Here is what that should look like in the Data Conversion shape: Direct the output of your data flow to a test table or file to see the results.  In my case, I created a test table.  The results looked like this:     Hold on a second!  That doesn't look like a date at all.  No, of course not.  It is a hex number which represents the days which have passed between 01/01/1950 and the date.  We have to convert the Hex value to a decimal value, and use the DATEADD function to get a date value.  Luckily, I have created a function to convert Hex to Decimal:   -- ============================================= -- Author:        Jim Giercyk -- Create date: March, 2012 -- Description:    Converts a Hex string to a decimal value -- ============================================= CREATE FUNCTION [dbo].[ftn_HexToDec] (     @hexValue NVARCHAR(6) ) RETURNS DECIMAL AS BEGIN     -- Declare the return variable here DECLARE @decValue DECIMAL IF @hexValue LIKE '0x%' SET @hexValue = SUBSTRING(@hexValue,3,4) DECLARE @decTab TABLE ( decPos1 VARCHAR(2), decPos2 VARCHAR(2), decPos3 VARCHAR(2), decPos4 VARCHAR(2) ) DECLARE @pos1 VARCHAR(1) = SUBSTRING(@hexValue,1,1) DECLARE @pos2 VARCHAR(1) = SUBSTRING(@hexValue,2,1) DECLARE @pos3 VARCHAR(1) = SUBSTRING(@hexValue,3,1) DECLARE @pos4 VARCHAR(1) = SUBSTRING(@hexValue,4,1) INSERT @decTab VALUES (CASE               WHEN @pos1 = 'A' THEN '10'                 WHEN @pos1 = 'B' THEN '11'               WHEN @pos1 = 'C' THEN '12'               WHEN @pos1 = 'D' THEN '13'               WHEN @pos1 = 'E' THEN '14'               WHEN @pos1 = 'F' THEN '15'               ELSE @pos1              END, CASE               WHEN @pos2 = 'A' THEN '10'                 WHEN @pos2 = 'B' THEN '11'               WHEN @pos2 = 'C' THEN '12'               WHEN @pos2 = 'D' THEN '13'               WHEN @pos2 = 'E' THEN '14'               WHEN @pos2 = 'F' THEN '15'               ELSE @pos2              END, CASE               WHEN @pos3 = 'A' THEN '10'                 WHEN @pos3 = 'B' THEN '11'               WHEN @pos3 = 'C' THEN '12'               WHEN @pos3 = 'D' THEN '13'               WHEN @pos3 = 'E' THEN '14'               WHEN @pos3 = 'F' THEN '15'               ELSE @pos3              END, CASE               WHEN @pos4 = 'A' THEN '10'                 WHEN @pos4 = 'B' THEN '11'               WHEN @pos4 = 'C' THEN '12'               WHEN @pos4 = 'D' THEN '13'               WHEN @pos4 = 'E' THEN '14'               WHEN @pos4 = 'F' THEN '15'               ELSE @pos4              END) SET @decValue = (CONVERT(INT,(SELECT decPos4 FROM @decTab)))         +                 (CONVERT(INT,(SELECT decPos3 FROM @decTab))*16)      +                 (CONVERT(INT,(SELECT decPos2 FROM @decTab))*(16*16)) +                 (CONVERT(INT,(SELECT decPos1 FROM @decTab))*(16*16*16))     RETURN @decValue END GO     Making use of the function, I found the decimal conversion, added that number of days to 01/01/1950 and FINALLY arrived at my “unpacked relative date”.  Here is the query I used to retrieve the formatted date, and the result set which was returned: SELECT [packedDate] AS 'Hex Value',        dbo.ftn_HexToDec([packedDate]) AS 'Decimal Value',        CONVERT(DATE,DATEADD(day,dbo.ftn_HexToDec([packedDate]),'01/01/1950'),101) AS 'Relative String Date'   FROM [dbo].[Output Table]         This technique can be used any time you need to retrieve the hex value of a character string in SSIS.  The date example may be a bit difficult to understand at first, but with SSIS becoming the preferred tool for enterprise level integration for many companies, there is no doubt that developers will encounter these types of requirements with regularity in the future. Please feel free to contact me if you have any questions.

  Read the article

• Global UTF-encoding, the right way

  - by mowgli

  I'm curious, as to what is the right way to have UTF-8 encoding on all web files All my files (incl. CSS and JS) are made and saved in UTF-8 encoding In PHP, I set the char-set on top of the main page (this page includes all others) with: header('Content-type: text/html; charset=utf-8'); In the same page I have this html meta tag: <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> Then I stubled upon an external css file that has this on first line: @charset "UTF-8"; And now I wonder, should I set the charset INSIDE all my CSS/JS files too, like that? And/or should I serve each file with charset=utf-8 in the meta tag?

  Read the article

• PostgreSQL data diff

  - by skanatek

  Note: this question is not about syncing database schema/structure Problem In my web application I have a PostgreSQL database server (PGS) and a (separate machine) business logic server (BLS) which regularly (every minute or two) queries 'SELECT ALL' against PGS. The problem is that the 'SELECT ALL' query can easily return 50-200 MB each time. It is obvious that it would be not so good architecture-wise to transfer so much data so frequently over the web. Possible solution What I would like to do is to run some diff tool on PGS and compare the new query with the previous query (all this should be done on PGS). Once the comparison is done I would like to get a dump from PGS and transfer it to BLS. I expect that a diff-based dump would be much, much smaller than the whole 'SELECT ALL' query. Question Is there any data diff tool for PostgreSQL that can do diffs that compare PostgreSQL data between 2 tables or 2 dumps? Note: I would prefer some open-source software tool.

  Read the article

• Redirect Permanent and https

  - by Clem

  I just set up https on my server, and I have an issue with redirect permanent. If I have a link for example http://domain.com/index.html it redirect me on https://www.domain.comindex.html The / is missing and I can't figure out how to fix it. It's work with http://www.domain.com/index.html Here is my httpd.conf <VirtualHost *:80> ServerName domain.com Redirect permanent / https://www.domain.com/ </VirtualHost> <VirtualHost *:80> ServerName www.domain.com Redirect permanent / https://www.domain.com/ </VirtualHost> <VirtualHost *:443> DocumentRoot /var/www/domain/ ServerName www.domain.com SSLEngine on SSLCertificateFile ssl.crt SSLCertificateKeyFile ssl.key </VirtualHost>

  Read the article

• SharpDOM, view engine for ASP.NET MVC

  Hi everyone! There is a new view engine for ASP.NET MVC platform, SharpDOM, http://sharpdom.codeplex.com. It's targeting hard coders who appreciate code-first approach a lot. This view engine combines pure HTML layout and the view logic in rather consistent manner, so that HTML layout still looks like HTML layout but it is C# code now :-) If you are interested, please, navigate to SharpDOM project on CodePlex site for more details - http://sharpdom.codeplex.com. Thanks!...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Embed Unity3D and load multiple games from a single app

  - by Rafael Steil

  Is is possible to export an entire unity3d project/game as an AssetBundle and load it on iOS/Android/Windows on an app that doesn't know anything about such game beforehand? What I have in mind is something like the web plugin does - it loads a series of .unity3d files over http, and render inline in the browser window. Is it even possible to do something closer for iOS/Android? I have read a lot of docs so far, but still can't be sure: http://floored.com/blog/2013/integrating-unity3d-within-ios-native-application.html http://docs.unity3d.com/Manual/LoadingResourcesatRuntime.html http://docs.unity3d.com/Manual/AssetBundlesIntro.html The code from the post at http://forum.unity3d.com/threads/112703-Override-Unity-Data-folder-path?p=749108&viewfull=1#post749108 works for Android, but how about iOS and other platforms?

  Read the article

• Hangul calligraphy (TTF)

  - by 2x2p1p

  Hi guys. I want a nice hangul font. Can somebody indicate one ? Something elegant and beautiful like this England calligraphy: I would like to apply it using css 3: <!DOCTYPE html> <html> <head> <meta charset = "utf-8"> <style> @font-face { font-family: "hangul"; src: url("hangul.ttf"); } body { font-family: hangul; } </style> <title></title> </head> <body> ? ? ? </body> </html> Thanks

  Read the article

• Add entries to Nautilus' right-click menu (copy, move to arbitrary directories)

  - by qbi

  Assume I want to copy a file from /home/foo/bar/baz to /opt/quuz/dir1/option3. When I try it with Nautilus, first I have to open the correct directory, copy the file, go to the other directory and paste it there. I was thinking of a better way and old KDE3 versions of Konqueror came to mind. It was possible to right-click on a file. The context menu had an option for copying, moving the file to some default directories. Furthermore you could select any directory under /. So for the above action one would right click on a file, select /opt first, a list of subdirectories will open, select /opt/quuz and so on. Using GNOME there are only two possible values (home and desktop). Is there any way to insert more directories to this context menu in GNOME? Can I copy somehow the behaviour of Konqueror?

  Read the article

• jqGrid - dynamically load different drop down values for different rows depending on another column value

  - by Renso

  Goal: As we all know the jqGrid examples in the demo and the Wiki always refer to static values for drop down boxes. This of course is a personal preference but in dynamic design these values should be populated from the database/xml file, etc, ideally JSON formatted. Can you do this in jqGrid, yes, but with some custom coding which we will briefly show below (refer to some of my other blog entries for a more detailed discussion on this topic). What you CANNOT do in jqGrid, referrign here up and to version 3.8.x, is to load different drop down values for different rows in the jqGrid. Well, not without some trickery, which is what this discussion is about. Issue: Of course the issue is that jqGrid has been designed for high performance and thus I have no issue with them loading a  reference to a single drop down values list for every column. This way if you have 500 rows or one, each row only refers to a single list for that particuolar column. Nice! SO how easy would it be to simply traverse the grid once loaded on gridComplete or loadComplete and simply load the select tag's options from scratch, via ajax, from memory variable, hard coded etc? Impossible! Since their is no embedded SELECT tag within each cell containing the drop down values (remeber it only has a reference to that list in memory), all you will see when you inspect the cell prior to clicking on it, or even before and on beforeEditCell, is an empty <TD></TD>. When trying to load that list via a click event on that cell will temporarily load the list but jqGrid's last internal callback event will remove it and replace it with the old one, and you are back to square one. Solution: Yes, after spending a few hours on this found a solution to the problem that does not require any updates to jqGrid source code, thank GOD! Before we get into the coding details, the solution here can of course be customized to suite your specific needs, this one loads the entire drop down list that would be needed across all rows once into global variable. I then parse this object that contains all the properties I need to filter the rows depending on which ones I want the user to see based off of another cell value in that row. This only happens when clicking the cell, so no performance penalty. You may of course to load it via ajax when the user clicks the cell, but I found it more effecient to load the entire list as part of jqGrid's normal editoptions: { multiple: false, value: listingStatus } colModel options which again keeps only a reference to the sinlge list, no duplciation. Lets get into the meat and potatoes of it.         var acctId = $('#Id').val();         var data = $.ajax({ url: $('#ajaxGetAllMaterialsTrackingLookupDataUrl').val(), data: { accountId: acctId }, dataType: 'json', async: false, success: function(data, result) { if (!result) alert('Failure to retrieve the Alert related lookup data.'); } }).responseText;         var lookupData = eval('(' + data + ')');         var listingCategory = lookupData.ListingCategory;         var listingStatus = lookupData.ListingStatus;         var catList = '{';         $(lookupData.ListingCategory).each(function() {             catList += this.Id + ':"' + this.Name + '",';         });         catList += '}';         var lastsel;         var ignoreAlert = true;         $(item)         .jqGrid({             url: listURL,             postData: '',             datatype: "local",             colNames: ['Id', 'Name', 'Commission<br />Rep', 'Business<br />Group', 'Order<br />Date', 'Edit', 'TBD', 'Month', 'Year', 'Week', 'Product', 'Product<br />Type', 'Online/<br />Magazine', 'Materials', 'Special<br />Placement', 'Logo', 'Image', 'Text', 'Contact<br />Info', 'Everthing<br />In', 'Category', 'Status'],             colModel: [                 { name: 'Id', index: 'Id', hidden: true, hidedlg: true },                 { name: 'AccountName', index: 'AccountName', align: "left", resizable: true, search: true, width: 100 },                 { name: 'OnlineName', index: 'OnlineName', align: 'left', sortable: false, width: 80 },                 { name: 'ListingCategoryName', index: 'ListingCategoryName', width: 85, editable: true, hidden: false, edittype: "select", editoptions: { multiple: false, value: eval('(' + catList + ')') }, editrules: { required: false }, formatoptions: { disabled: false} }             ],             jsonReader: {                 root: "List",                 page: "CurrentPage",                 total: "TotalPages",                 records: "TotalRecords",                 userdata: "Errors",                 repeatitems: false,                 id: "0"             },             rowNum: $rows,             rowList: [10, 20, 50, 200, 500, 1000, 2000],             imgpath: jQueryImageRoot,             pager: $(item + 'Pager'),             shrinkToFit: true,             width: 1455,             recordtext: 'Traffic lines',             sortname: 'OrderDate',             viewrecords: true,             sortorder: "asc",             altRows: true,             cellEdit: true,             cellsubmit: "remote",             cellurl: editURL + '?rows=' + $rows + '&page=1',             loadComplete: function() {               },             gridComplete: function() {             },             loadError: function(xhr, st, err) {             },             afterEditCell: function(rowid, cellname, value, iRow, iCol) {                 var select = $(item).find('td.edit-cell select');                 $(item).find('td.edit-cell select option').each(function() {                     var option = $(this);                     var optionId = $(this).val();                     $(lookupData.ListingCategory).each(function() {                         if (this.Id == optionId) {                                                       if (this.OnlineName != $(item).getCell(rowid, 'OnlineName')) {                                 option.remove();                                 return false;                             }                         }                     });                 });             },             search: true,             searchdata: {},             caption: "List of all Traffic lines",             editurl: editURL + '?rows=' + $rows + '&page=1',             hiddengrid: hideGrid   Here is the JSON data returned via the ajax call during the jqGrid function call above (NOTE it must be { async: false}: {"ListingCategory":[{"Id":29,"Name":"Document Imaging & Management","OnlineName":"RF Globalnet"} ,{"Id":1,"Name":"Ancillary Department Hardware","OnlineName":"Healthcare Technology Online"} ,{"Id":2,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":3,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":4,"Name":"Asset Tracking","OnlineName":"Healthcare Technology Online"} ,{"Id":5,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":6,"Name":"Document Imaging & Management","OnlineName":"Healthcare Technology Online"} ,{"Id":7,"Name":"EMR/EHR Software","OnlineName":"Healthcare Technology Online"}]} I only need the Id and Name for the drop down list, but the third column in the JSON object is important, it is the only that I match up with the OnlineName in the jqGrid column, and then in the loop during afterEditCell simply remove the ones I don't want the user to see. That's it!

  Read the article

• How can I prevent Google mistakenly offering to translate a page?

  - by DisgruntledGoat

  Several of my site's pages are appearing in search results with [Translate this page] next to it. When I click that it takes me to Google Translate and translates my page "from Catalan to English". The pages are in English but have a couple of foreign words (actually Japanese romanisations, not Catalan) that appear to be tripping Google up. A few weeks ago I set the html tag to <html lang="en"> which from research appears to be the best method to specify the language of a document. Google has cached the pages with this attribute but it is still offering to translate. More research led me to a "notranslate" attribute which prevents translation entirely: <html lang="en" class="notranslate">. The problem now is users cannot translate from English to their desired language! Are there any other solutions that force Google to parse my site as English only?

  Read the article

• Table and Column Checksums

  - by Ricardo Peres

  Following my last posts on Change Data Capture and Change Tracking, here is another tip regarding tracking changes: table and colum checksums. The concept is: each time a column value changes, the checksum also changes. You can use this simple method to see if a table has changed very easily, however, beware, different column values may generate the same checksum. Here's the SQL: -- table checksum SELECT CHECKSUM_AGG(BINARY_CHECKSUM(*)) FROM TableName -- column checksum SELECT CHECKSUM_AGG(BINARY_CHECKSUM(ColumnName)) FROM TableName -- integer column checksum SELECT CHECKSUM_AGG(IntegerColumnName) FROM TableName Here are the reference links on the CHECKSUM, CHECKSUM_AGG and BINARY_CHECKSUM functions: CHECKSUM CHECKSUM_AGG BINARY_CHECKSUM SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.Xml.aliases = ['xml']; SyntaxHighlighter.all();

  Read the article

• Insane load average after reboot

  - by Gazzer

  After doing a reboot of Ubuntu server 12.04 LTS (after an apt-get dist-upgrade) my server load (on a 16GB) machine goes insane (around 80) for about 10 or 15 minutes The only things I can think of are these two processes: /usr/bin/mysql --defaults-file=/etc/mysql/debian.cnf --skip-column-names --batch -e ? select concat('select count(*) into @discard from `',? TABLE_SCHEMA, '`.`', TABLE_NAME, '`') ? from information_schema.TABLES where ENGINE='MyISAM' /usr/bin/mysql --defaults-file=/etc/mysql/debian.cnf --skip-column-names --silent --batch --force -e select count(*) into @discard from `information_schema`.`PARTITIONS` Is this normal?

  Read the article

• Moving large website to new CMS - URL changes

  - by herrherr

  Hi, I was wondering if you have any tipps on the following situation. I'm going to move a large website to a new Content Management System, here are some details on the site: online news magazine with roughly 3,000 articles domain age: 10 years online in the current form since May 2010 indexed pages: ~10.000 percent of search engine traffic: under 10% Unfortunately a custom-tailored CMS was used for the site. The performance, reliability and SEO capabilites have been really bad, so we are moving to a new and proven open source CMS. All the articles will be kept as they are, but the URL structure as well as the structure of the HTML templates will be changed. What I wanted to do now is to actually create 301 redirects for all articles from the old to the new schema, i.e: Old: www.example.com/en/html/news/detail/title-of-the-article/ New: www.example.com/category/title-of-article.html Is this a proven way to do something like this? If not, can you recommend a way that has worked for you? Thanks :)

  Read the article

• Alternatives for saving data with jquery

  - by Phil Vallone

  I am not sure if this question is considered too broad, but I would like to reach out to my fellow programmers to see what alternatives are out there for saving data using jquery. I have a content management system that generates an set of HTML pages called an IETM (Interactive Electronic Technical Manual). The HTML pages are written in HTML and uses jquery. The ITEM is meant to be light weight, portable and run on most modern browsers. I am looking for a way to save data. I have considered cookies and sqlite. Are there any other alternatives for saving data using jquery?

  Read the article

• Phishing : une nouvelle technique se répand avec le HTML5, elle contourne le blacklistage des URL malicieuses

  Phishing : une nouvelle technique se répand avec le HTML5 Elle contourne le blacklistage des URL malicieuses Les spammeurs et autres cyber-escrocs se mettent eux aussi au HTML5 pour contourner les mesures anti-spam et anti-phishing de plus en plus répandues et efficaces des navigateurs et les clients de messagerie. Au lieu d'intégrer aux mails des liens HTML classiques vers des pages souvent blacklistées, les spammeurs "modernes" privilégieraient désormais les « attachements HTML ». M86, la firme de sécurité met en tout cas en garde contre la recrudescence de ces menaces. Les liens dans les mail pointent désormais vers des pages HTML jointe, qui contiennen...

  Read the article

• Is it possible for a web-server to send more files than requested for, and have the browser accept them?

  - by Osiris

  I've created a basic web server for a school project, and it serves static content without a problem. I thought of having the server parse all htm/html files for links to .js/.css/image files, and send these files to the client without these files being requested by the client later. eg. The browser requests: index.htm The server responds with intex.htm and image.jpg I modified the server to send two distinct http responses for a "GET /index.html HTTP1.1" (one for the html page and one for the image), but the browser ended up requesting the image when it was good and ready. Is there any way to bypass this? (use a multipart response, perhaps) Will these files be accepted by most browsers, or will they be rejected for security reasons?

  Read the article

• Blender 2.64, what are the actual hot-keys for certain actions

  - by Shivan Dragon

  I know this sounds mega lame but I've looked for hotkeys for certain actions, first in the appliation's User Settings (where I didn't find them) then in the official documentation (where I did find some of them but they're not the right ones): http://wiki.blender.org/index.php/Doc:2.4/Manual/3D_interaction/Transform_Control/Manipulators (Ctrl - Alt - S is recommended for Scale, but instead it opens the Save As... window - I think these changed in the latest versions, but they forgot to update the docs) So then, what are the hot keys for: selecting translate manipulator selecting rotate manipulator selecting scale manipulator In Edit mode: select vertex (editing) select edges (editing) select faces (editing) thanks.

  Read the article

< Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567  | Next Page >