Search Results

Search found 20592 results on 824 pages for 'anything'.

Page 561/824 | < Previous Page | 557 558 559 560 561 562 563 564 565 566 567 568  | Next Page >

• How to multiseat with HW 3d accel on CentOS 6.3 Final?

  - by user35070

  I would like to setup a multiseat configuration on CentOS 6.3 (two video cards, two keyboards, two mice, two monitors) and have hardware accelerated 3D on both monitors. 3D HW acceleration rules out Xephyr. I saw somewhere that recent versions of GDM (3.3 and newer?) don't support multiseat, so do I have to install KDM to make this work? If I just create a duplicate section with new device identifiers in my xorg.conf file, will this 'just work'? Using different ports on the same video card and separate keyboards, mice, and displays, the result was a desktop which spanned both monitors with both keyboards and mice acting as the same input in the GUI. I will power down and put in the new video card and report on the results soon. Both video cards are nvidia. UPDATE after putting in another NVIDIA video card, default behavior (before changing xorg.conf) is that one screen works normally, and both mice and keyboards are connected to it. Changing xorg.conf and the display manager to KDM and following the directions here https://help.ubuntu.com/community/MultiseatX#Ubuntu_10.04_.28Lucid.29 , I have 2 mirrored screens connected to separate video cards, DRI enabled, and 2 mice both connected to the same pointer. Keyboards don't do anything, however, I probably just need to fix a setting in xorg.conf I would still like to get multiseat functionality, eg. separate screens with separate input devices I have verified that the separate X processes are running (see page above) using 'ps aux | grepX [01]'

  Read the article

• How can I view the binary contents of a file natively in Windows 7? (Is it possible.)

  - by Shannon Severance

  I have a file, a little bigger than 500MB, that is causing some problems. I believe the issue is in the end of line (EOL) convention used. I would like to look at the file in its uninterpreted raw form (1) to confirm the EOL convention of the file. How can I view the "binary" of a file using something built in to Windows 7? I would prefer to avoid having to download anything additional. (1) My coworker and I opened the file in text editors, and they show the lines as one would expect. But both text editors will open files with different EOL conventions and interpret them automagically. (TextEdit and Emacs 24.2. For Emacs I had created a second file with just the first 4K bytes using head -c4096 on a linux box and opened that from my windows box. I attempted to use hexl-mode in Emacs, but when I went to hexl-mode and back to text-mode, the contents of the buffer had changed, adding a visible ^M to the end of each line, so I'm not trusting that at the moment. I believe the issue may be in the end of line character(s) used. The editors my coworker and I tried (1) just automagically recognized the end of line convention and showed us lines. And based on other evidence I believe the EOL convention is carriage return only. (2) return only. are able to recognize and To know what is actually in the file, I would like to look at the binary contents of the file, or at least a couple thousand bytes of the file, preferablely in Hex, though I could work with decimal or octal. Just ones an zeros would be pretty rough to look at.

  Read the article

• Backing up VMs to a tape drive

  - by Aljoscha Vollmerhaus

  I've got myself one of these fancy tape drives, HP LTO2 with 200/400 GB cartridges. The st driver reports it like this: scsi 1:0:0:0: Sequential-Access HP Ultrium 2-SCSI T65D I can store and retrieve files like a charm using tar, both tar cf /dev/st0 somedirectory and tar xf /dev/st0 work flawless. However, what I really would like to backup are LVM LVs. They contain entire virtual machines with varying partition layouts, so using mount and tar is not an option. I've tried using something like dd if=/dev/VG/LV bs=64k of=/dev/st0 to achieve this, but there seem to be various problems associated with this approach. Firstly, I would like to be able to store more than 1 LV on a single tape. Now I guess I could seek to concatenate the data on the tape, but I think this would not work very well in an automated scenario with many different LVs of various sizes. Secondly, I would like to store a small XML file along with the raw data that contains some information about the VM contained in the LV. I could dump everything to a directory and tar it up - not very desirable, I would have to set aside huge amounts of scratch space. Is there an easier way to achieve this? Thirdly, from googling around it seems like it would be wise to use something like mbuffer when writing to the tape, to prevent what wikipedia calls "shoe-shining" the tape. However, I can't get anything useful done with mbuffer. The mbuffer man page suggests this for writing to a tape device: mbuffer -t -m 10M -p 80 -f -o $TAPE So I've tried this: dd if=/dev/VG/LV | mbuffer -t -m 10M -p 80 -f -d 64k -o /dev/st0 Note the added "-d 64k" to account for the 64k block size of the tape. However, reading data back from a tape written in this way never seems to yield any useful results - dd has been running for ages now, and managed to transfer only 361M of data from the tape. What's wrong here?

  Read the article

• mcelog doesn't fails to start PUIAS 6.4 amd hardware

  - by Predrag Punosevac

  Folks, I am a total Linux n00b. I am trying to deploy mcelog on one of my computing nodes running PUIAS 6.4 (i86_64) [root@lov3 edac]# uname -a Linux lov3.mylab.org 2.6.32-358.18.1.el6.x86_64 #1 SMP Tue Aug 27 22:40:32 EDT 2013 x86_64 x86_64 x86_64 GNU/Linux a free clone of Red Hat 6.4 on AMD hardware [root@lov3 mcelog]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 4 NUMA node(s): 8 Vendor ID: AuthenticAMD CPU family: 21 Model: 2 Stepping: 0 CPU MHz: 1400.000 BogoMIPS: 4999.30 Virtualization: AMD-V L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 6144K NUMA node0 CPU(s): 0-7 NUMA node1 CPU(s): 8-15 NUMA node2 CPU(s): 16-23 NUMA node3 CPU(s): 24-31 NUMA node4 CPU(s): 32-39 NUMA node5 CPU(s): 40-47 NUMA node6 CPU(s): 48-55 NUMA node7 CPU(s): 56-63 My mcelog.conf file is more or less default apart of the fact that I would like to run mcelog as a daemon and to log errors. When I start mcelog [root@lov3 mcelog]# mcelog --config-file mcelog.conf AMD Processor family 21: Please load edac_mce_amd module. However the module is present [root@lov3 mcelog]# locate edac_mce_amd.ko /lib/modules/2.6.32-358.18.1.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko /lib/modules/2.6.32-358.el6.x86_64/kernel/drivers/edac/edac_mce_amd.ko and loaded [root@lov3 edac]# lsmod | grep mce edac_mce_amd 14705 1 amd64_edac_mod Is there anything that I can do to get mcelog working? The only reference I found is this thread http://lists.centos.org/pipermail/centos/2012-November/130226.html

  Read the article

• VMware Workstation executes nonexisting and outdated File

  - by RED SOFT ADAIR-StefanWoe

  I execute a command line program from a VM (VMware 7.1.1) with Windows XP. The executable file is located on the host machine. If i start a command line in the VM, using a drive mounted as .host\SharedFolders i see the following: D:\projects\myProgram\WinRel>dir myProgram.exe 02.09.2010 21:15 245.760 myProgram.exe D:\projects\myProgram\WinRel>myProgram.exe Processing BuildFeb 26 2009 This is wrong! The whole execution of the program behaves like the version that is outdated more than one year! I triple checked that there is no confusion or anything If i start the Program on the host or if i even start it from the VM using a UNC Path, it shows the last build date and executes as expected: C:\>dir \\myMachine\drive_d\projects\myProgram\WinRel\myProgram.exe 02.09.2010 21:15 245.760 myProgram.exe C:\>\\myMachine\drive_d\projects\myProgram\WinRel\myProgram.exe Processing Build: Sep 2 2010 Can this behavior somehow be explained? There MUST be a cache for the host mounted drive. The program it executes does not exist anymore! If i remove it from the host, the VM can not execute it anymore. If i restore it, the behavior becomes the same again.

  Read the article

• Trying to run QEMU with a file as hda

  - by Felix

  I'm trying to run QEMU and use a simple file on the host system as the guest's hard drive. Here's what I attempted so far: $ dd if=/dev/zero of=/home/felix/vm/archlinux.img bs=1MB count=8192 8192+0 records in 8192+0 records out 8192000000 bytes (8.2 GB) copied, 86.6054 s, 94.6 MB/s $ qemu -hda /home/felix/vm/archlinux.img -cdrom archlinux-2009.08-netinstall-i686.iso -boot d Then I try to install Archlinux to that file. It goes pretty well (it's able to format it from what I can tell) until I start installing packages, when I get errors like this: And, of course, everything goes downhill from there (unable to mount the partition, corrupted files, ...). What am I doing wrong? Note: I'm just doing this for entertainment purposes. I don't intend to actually use this on servers or anything. The only use I can think of for this kind of installation would be to actually get an 8GB USB stick and dd that file to it and wham! You have a bootable stick with a fully fledged and customized OS, and without torturing the stick through the installation.

  Read the article

• 4.00gb (3.25gb usable) in Windows 7 x64

  - by dotnetdev

  Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

  Read the article

• SSD - Tweaks/Recommended Configuration

  - by Miky D

  I've just purchased my first SSD drive (a 32GB MLC from Imation) without doing enough research ahead of time in the spirit of giving the new technology a shot and getting myself up to speed by empirical research rather than reading countless reviews and I'm now at a crossroads. I've built a new server to test the new drive and at first I wanted to test it with Windows Server 2003 R2 x86 but after I loaded the OS on it and it had problems loading the drivers of the motherboard I went to the internet and did more research and the more I read the more I got confused. Finally I decided to try out Windows Server 2008 R2 x64 since it supposedly has certain support for SSD drives inherent in the NT 6.1 core. Indeed I've had much better luck with the new OS and got all the drivers installed but now I still have some questions: Should I set the drive to: IDE Emulation or AHCI in the BIOS? Should I make any other changes in the BIOS (I've read on the internet that Write Through should be changed to Write Back) Should I make any other adjustments in Windows (i.e. Tweaks such as disabling prefetching or disabling the Last Accessed Timestamp on the filesystem) and if so, is there a good/reliable online resource with instructions? I'm so tired of reading through countless online posts which spend 80% of coverage on the history of SSDs and benchmarks and explanations of how SSDs work. I got that, now I'd like to know if there's anything I should actually do to make sure Windows Server 2008 R2 makes good use of the SSD.

  Read the article

• Ubuntu 12.4 compiz - disable all compiz plugin - empty screen

  - by gotqn

  A friend of mine has installed on my new machine Ubuntu 10.4 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

  Read the article

• how to split a very large database on sql server

  - by ken jackson

  I have a 90 GB SQL Server database that I want to make more manageable. It stores stock data from 50+ different stocks from 2009 and 2010, and each stock is a separate table. Some tables have hundreds of millions of rows, and other have just a few million. What I want to do is somehow split the database, so that I don't have a single database file that is 90 GB. What I want is to be able to somehow magically split all the tables so that I can backup the 2009 data once and not have to keep on including it in the backup every time I backup the entire database, however, I would like the 2009 data to be included whenever I do a query. Is partitioning the database the way to go? Will it do the above for me, or will I need some other solution? I research partitioning, but I wasn't sure if that would solve all my problems. I wasn't able to find anything that would tell me whether or not it would migrate prexisting data, or whether it only worked for newly inserted data. Any help or pointers would be much appreciated. Thanks in advance, Ken

  Read the article

• Wifi network undetectable on a Lenovo G470

  - by Rex

  I have a WPA2 secured network with a visible SSID at home that works perfectly fine with a Dell laptop,a HP netbook and sundry mobile phones. When I try connecting my sister's Lenovo G470, it refuses to detect the wifi network no matter what, but shows up the neighbors' networks. The Lenovo also works correctly at her office. Both laptops run Windows 7. Already tried/checked the following: Manually configure wifi network settings (copied over from the Dell) Ensure there is no MAC address filtering on the router. Ensure router DHCP server is not running out of addresses to assign (I have set it to allocate upto 10). Reboot laptop, router etc. Is this a known problem, and is there anything else one could try? Update - The problematic Lenovo uses Windows 7 Home Basic while the Dell that works uses Home Premium and the HP netbook uses Starter edition - if that makes any difference. Further update - It is able to connect if I reboot into safe mode with networking. However in 'normal' mode it shows up the network sporadically, and then says there was an error connecting to it. All the network parameters, password, encryption, etc etc are EXACTLY the same as they are on the Dell.

  Read the article

• client flips between internal and external IP addresses??

  - by jmiller-miramontes

  I have what seems like a not-particularly-complicated home network, all things considered: a DSL line comes in to a modem/router, which goes off to a switch, which supports a bunch of machines. My machines live in a 192.168.0.x address space; however, I'm running some public servers on the network, so I have a block of 8 (5, really) static IP addresses that are mapped to the servers by the router. The non-servers get 192.168.0.x addresses via NAT; some machines have static addresses and some get addresses from DHCP. Locally, I'm running a DNS server (named) to map between the domain names and the 192.168 address space. Somewhat messy, but everything basically works. Except: One of my local non-server clients occasionally switches from its internal address to its external address. That is, if I check the logs of a website I'm running internally, the hits coming from this client sometimes show up with the internal 192.168 address, and sometimes with the external (216.103...) address. It will flip back and forth for no apparent reason, without my doing anything. This can be a problem in terms of how the clients interact with the way I have some of the clients' SSH systems configured (e.g., allowing access from the internal network but not the external network), but it also Just Seems Wrong. I will confess that I'm kinda skating on the very edge of my networking competence here, but I can't for the life of me figure out what's going on. If it helps, the client in question is running Mac OS X / 10.6; its address is statically assigned, is not one of the five externally-accessible addresses, and gets its DNS from (first) the internal DNS server and (second) my ISP's DNS servers. I can't swear that none of the other NAT clients are also showing this problem; the one I'm dealing with is my everyday machine, so this is where I run into it. Does anybody out there have any advice? This is driving me crazy...

  Read the article

• Ping: sendmsg: operation not permitted error after installing iptables on Arch GNU/Linux

  - by estol

  Yesterday I got a new computer as my homeserver, a HP Proliant Microserver. Installed Arch Linux on it, with kernel version 3.2.12. After installing iptables (1.4.12.2 - the current version afaik) and changing the net.ipv4.ip_forward key to 1, and enabling forwarding in the iptables configuration file (and rebooting), the system cannot use any of its network itnerfaces. Ping fails with Ping: sendmsg: operation not permitted If I remove iptables completely, networking is okay, but I need to share the Internet connection to the local network. eth0 - wan NIC integrated on the motherboard (no idea of vendor, probably HP). eth1 - lan NIC in a pci-express slot (Intel Gigabit CT Desktop http://www.intel.com/content/www/us/en/network-adapters/gigabit-network-adapters/gigabit-ct-desktop-adapter.html) Since it works without iptables(server can access the internet, and I can login with ssh from the internal network), I assume it has something to do with iptables. I do not have much experience with iptables, so I used these as reference (separate from each other of course...): wiki.archlinux.org/index.php/Simple_stateful_firewall#Setting_up_a_NAT_gateway revsys.com/writings/quicktips/nat.html howtoforge.com/nat_iptables On my previous server, I used the revsys guide to set up nat, worked like a charm. Anyone experienced anything like this before? What am I doing wrong? Thanks, estol

  Read the article

• How can I stream audio signals from various devices/computers to my home server?

  - by Breakthrough

  I currently have a headless home server set up (running Ubuntu 12.04 server edition) running a simple Apache HTTP server. The server is near an audio receiver, which controls a set of indoor and outdoor speakers in my home. Recently, my father purchased a Bluetooth adapter, which our various laptops and cellphones can connect to, outputting the music to the speakers. I was hoping to find a solution that worked over Wi-Fi, namely because it won't cost anything (I already have a server with an audio card), and it doesn't depend on Bluetooth. Is there any cross-platform (preferably free and open-source) solution that I can use which will allow me to stream audio to my home server, over my home network, from a wide variety of devices (laptops running Windows/Linux or cellphones running Android/BB/iOS)? I need something that works at least with Windows and Android. Also, just to clairfy, I want something that simply allows devices to connect to my server and output an audio signal without any action on the server end (since it's a server hidden away near my receiver). Any subsequent connection attempt should be dropped, so only one device can be in control of the stereo at once.

  Read the article

• How does the EFI partition work and can I boot an x86 OS with a bootx64.efi file?

  - by Ian

  I have a Thinkpad X230 laptop and I want to install Linux Mint Debian Edition along side Windows 7 on my GPT formatted SSD with the BIOS in UEFI mode. The problem is that I don't understand how EFI booting works. There seems to be an EFI partition involved with some folders and binary files in it. GRUB 2 seems to be able to make more folders in it (I followed this guide http://www.thinkwiki.org/wiki/UEFI_Firmware), but it appears that the only file that does anything is the bootx64.efi file in the /efi/boot folder of the EFI partition (I am not sure if this is always the case, but it appears to be the case for my laptop http://www.thinkwiki.org/wiki/Category:X220). Here is what I have been able to do: I can install Linux Mint Debian Edition x86 with the BIOS in BIOS mode on my SSD. I can then install grub-efi and follow the guide linked above. The problem is that I don't get a GRUB prompt when I switch the BIOS to UEFI mode. It just boots Windows. It appears that I can either boot from the SSD or something called "Windows Boot Manager". If I replace the bootx64.efi with the file created by GRUB, I can no longer boot directly from the SSD. Booting from "Windows Boot Manager" still works fine. I realize that the guide says to use x64 Linux, but Linux Mint Debian Edition x64 hangs during the install process. I am really confused. What should I do? Can anyone explain how the EFI boot partition works? Can a bootx64.efi boot an x86 OS? Should I just give up with using UEFI? I haven't been able to find very much useful information about using Debian based operating systems with UEFI. Thanks, Ian

  Read the article

• laptop motherboard "shorts" when connected to adapter

  - by Bash

  Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

  Read the article

• IIS7 Session ID rotating with Classic ASP

  - by ManiacZX

  I am trying to migrate a Classic ASP app onto a Windows 2008 R2 server. The application features run fine, but I am having issue with session. The application keeps the logged in user information in session and I am constantly getting knocked out as if the session had expired. While debugging I have discovered the sessions are not expiring but instead I am getting 2-3 different Session IDs in use by one browser. I am outputting Response.Write(Session.SessionID) on various pages in the application and I can sit there and hit refresh over and over and watch the number changed between these 2-3 SessionIDs randomly. The sessions are still valid because when I refresh and get the Session ID that I logged in under the page is displayed (because the security check was successful) and when I get one of the other Session IDs I get the "you aren't logged in, you need to log in" message. If I close and re-open the browser, same story just the set of IDs are new. This happens with IE8, Firefox and Chrome from multiple computers. Things I've tried: - AppPool set to No Managed Code and Classic - Output Caching set .asp to never cache - ASP Session Properties enabled and disabled asp session state and confirmed it affected page (error trying to read Session.SessionID when disabled) Things I've tried just in case but shouldn't have anything to do with ASP Session: - Disabled compression - Changed ASP.Net Session State properties (InProc, StateServer, SQLServer, Cookies, URI, etc) -

  Read the article

• Can I use Outlook 2010 (beta) with OWA account?

  - by Dan

  One of the new features of Outlook 2010 (beta) is the support for multiple Exchange accounts. I'm wondering if there is any way to use this together with a (different) Outlook Web Access account to also get that email in Outlook. Specifially, in additional to my regular corporate (Exchange) account, I also use another corporate account through OWA. With this second account, the only supported access is through OWA; while POP3 access is available, it is not actually suported. I'm not very familiar with configuring Exchange servers, but in talking to those who are, it sounds like enabling Outlook Web Access is (slightly) different than allowing access from Outlook via HTTP(s). Is that correct? If so, it doesn't really semm quite right as absolute worst-case, one could (theoretically) resort to screen-scraping OWA. Edit: this looks to be about the same as Activesync/OWA Desktop Client? (This doesn't have anything to do with the question, but I'm actually using this second corporate account in Outlook by POP3'ing to Gmail, and then IMAP4 from Gmail to Outlook. Obviously, it would be much nicer to add it as a second Exchange account.).

  Read the article

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• Window Management for Mac OS X

  - by Paolo Maffei

  Ok, I feel dumb. I've put many hours into this and found nothing, yet. When I was using Windows I had this little tool called WinSplit Revolution. What it did was letting you divide your screen into how many and of how much size you choose "virtual monitors". You set one time of you want to divide your monitor, then everytime WinSplit is opened the monitor is automatically divided into Virtual Monitors. Screenshots: http://www.google.com/images?hl=en&q=winsplit%20revolution&um=1&ie=UTF-8&source=og&sa=N&tab=wi&biw=1045&bih=499 I'm now using a 30' which i want almost always divided into 4 equal size "virtual monitors" (plus my mbp 13' those will be 5 1280x800 virtual monitors) Now I've switched to Mac OS X and can't find anything that does just this efficiently. I tried Divvy but I found no way to divide my screen into arbitrary "virtual monitors", I need a couple of clicks to select a 3x3 space on a 9x9 grid. Before starting coding something like this can you tell me if you already know of some software that does window management like this?

  Read the article

• run as dialog always pops up

  - by user12006

  I recently got some malware on a machine that I don't use for much (partly intentional). I've cleaned it, but now everytime I open any .exe the 'Run As' dialog pops up asking me which user I want to use to run the program. What causes this, and what's the fix for it? edit My process to remove the malware was as such: Disconnected from the network Deleted DisableTaskMgr reg key Inspected with Process Explorer and Task Manager and noticed that all applications were being run within another executable located in Documents and Settings...\Temp\Some.exe The system tray application was also in Documents and Settings...\Temp\SomeOther.exe I suspected that a service was in place as the system tray application would restart if it was killed, but couldn't find any service that I didn't recognize. Removed permissions from Some.exe and SomeOther.exe (on those files only) Restarted and deleted Some.exe and SomeOther.exe Deleted startup entries that were created Ran AVG Free and Windows Defender to remove anything else (they would be killed immediately before the two .exe's were removed) Cleaned registry via CCleaner note that system restores would finish saying something to the effect of 'couldn't restore system: there were no changes made'. I attempted to restore to a week ago, and I only got the malware yesterday.

  Read the article

• What do I need in order to extract and combine text files from multiple ZIP files, via command line?

  - by Iszi

  I've got an interesting scripting challenge in front of me. I'm fairly certain there's a way to do it, but I feel like I'm probably lacking some particular tools and/or functional knowledge. There's some fifty-plus ZIP files that each contain, among other things, text files that need to be merged with one another. The structure is something like this: C:\Reports\FirstJob-1.zip |-MyName |-FirstJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt C:\Reports\FirstJob-2.zip |-MyName |-FirstJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt C:\Reports\SecondJob-1.zip |-MyName |-SecondJob |-1 |-[Some other folders] |-TXTReports |-English |-[Some other files] |-Report.txt If I had all the Report.txt files in one regular folder, and uniquely named, I could probably just write a FOR statement that targets *.txt and runs something like type filename.txt >> Consolidated.txt on each. However, these all have the same file name and are embedded deep within separate ZIP files. The potentially useful tools I currently have at my disposal are Windows XP Professional SP3, PowerShell, and WinZip. I'd rather not download or install anything else, but I do understand that third-party tools (or additional tools from Microsoft or WinZip) may be necessary. Whatever tools I use should run natively in Windows. I really don't want to have to mess with Cygwin or other emulators on this system. At the very least, I need a tool that will allow me to analyze and manipulate ZIP files from the command line. Also, are there any other particular complications to this that I've not yet thought of?

  Read the article

• Apache directory structure with multiple hosted languages.

  - by anomareh

  I just got a new work machine up and running and I'm trying to decide on how to set everything up directory wise. I've done some digging around and really haven't been able to find anything conclusive. I know it's a question with a variety of answers but I'm hoping there's some sort of general guidelines or best practices to go by. With that said, here are a few things specific to my situation. I will be doing actual development and testing on the same machine as the server. It is a single user machine in the sense that I will be the only one working on the machine. There will be multiple hosted languages, specifically PHP and RoR while possibly expanding later. I'd like the setup to translate well to a production environment. With those 3 things in mind there are a couple of things I've had in the back of mind. Seeing as it's a single user machine I haven't been able to decide whether or not I should be working on things out of my home directory or if they should be located outside of it. I'm feeling that outside of a user directory would be better as it would translate better to a production environment, but I'm also not sure if that will come with any permission annoyances or concerns seeing as I'll be working on the same machine. Hosting multiple languages seems like it may be a bit quirky. With PHP I've found you're generally just dumping the project somewhere in the document root where as something like a Rails app you have the entire project and you only want the public directory in the document root. Thanks for any insight, opinion, or just personal preference from experience anyone can offer.

  Read the article

• Apache2 on Raspbian: Multiviews is enabled but not working [closed]

  - by Christian L

  I recently moved webserver, from a ubuntuserver set up by my brother (I have sudo) to a rasbianserver set up by my self. On the other server multiviews worked out of the box, but on the raspbian it does not seem to work althoug it seems to be enabled out of the box there as well. What I am trying to do is to get it to find my.doma.in/mobile.php when I enter my.doma.in/mobile in the adress field. I am using the same available-site-file as I did before, the file looks as this: <VirtualHost *:80> ServerName my.doma.in ServerAdmin [email protected] DocumentRoot /home/christian/www/do <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/christian/www/do> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> From what I have read various places while googling this issue I found that the negotiation module had to be enabled so I tried to enable it. sudo a2enmod negotiation Giving me this result Module negotiation already enabled I have read through the /etc/apache2/apache2.conf and I did not find anything in particular that seemed to be helping me there, but please do ask if you think I should post it. Any ideas on how to solve this through getting Multiviews to work?

  Read the article

• Is my HDD dead forever?

  - by Roberto

  Yesterday I turned on my computer and it couldn't boot. I found out the hd (320GB SATA Seagate Momentus 7200.3 for notebook) was broken and it couldn't be recognized by the BIOS. I have another of the same hard drive, so I exchanged the boards. I found out that there is a problem on its board since my good hard drive didn't work. But the broken hard drive doesn't work with the good board as well: it can be recognized but when I insert a Windows Instalation DVD it says the hard drive is 0GB. I put it in a case and use it in another computer via USB, and but it doesn't show up in the "My Computer". I used a software to recover files called "GetDataBack for NTFS", it recognized the hard drive but with the wrong size (2TB). I try to make it read the hard drive but it got an I/O error reading sector. It tries to read, the hard drive spins up. So, since I'm using a good board on it, the problem seems to be internal. Is there anything someone could do to recover the files from it?

  Read the article

< Previous Page | 557 558 559 560 561 562 563 564 565 566 567 568  | Next Page >