Search Results

Search found 14185 results on 568 pages for 'cd drive'.

Page 562/568 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568  | Next Page >

  • Why is my mdadm raid-1 recovery so slow?

    - by dimmer
    On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

    Read the article

  • Windows 7: Search indexing is stuck

    - by Ricket
    When I open Indexing Options, it says: 4,317 items indexed Indexing in progress. Search results might not be complete during this time. It's stuck at 4,317 though; no more items have been indexed. Worst of all, SearchIndexer.exe is taking up 100% CPU (well, 50%, but I have a dual core CPU; it's taking up all processing power it can). It is not causing hard drive activity though. I tried clicking "Troubleshoot search and indexing" at the bottom of the Indexing Options window, but it couldn't find any problem. I've also tried the repair registry key that several websites suggest; I change HKLM\SOFTWARE\Microsoft\Windows Search SetupCompletedSuccessfully to 0 and restarted the computer, and it apparently repaired because it flipped back to 1, but the same problem continues to occur. It's reducing the battery life of my laptop and making it really hot so that my fans are running all the time. I've had to disable the Windows Search service. How can I fix this? Do I need to just flat-out reformat my computer? Update: I've tried rebuilding a couple times. There's nothing unusual about the locations I have to index, and I don't have any downloads in progress or anything like that. I don't see any reason why it stopped, and I noticed it much too late to do a system restore. At this point, I'm hoping someone will offer up some secret answer that will fix the problem, thus the bounty. Another update: I tried starting the service again, just to let it try yet again. It seemed okay at first (Indexing Options showed it operating at reduced speed due to user activity, and the number of files was going up). A while later I checked, and the service had stopped. Event viewer revealed some errors like this: Log Name: Application Source: Application Error Date: 2/1/2010 7:34:23 PM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ricky-win7 Description: Faulting application name: SearchIndexer.exe, version: 7.0.7600.16385, time stamp: 0x4a5bcdd0 Faulting module name: NLSData0007.dll, version: 6.1.7600.16385, time stamp: 0x4a5bda88 Exception code: 0xc0000005 Fault offset: 0x002141ba Faulting process id: 0x13a0 Faulting application start time: 0x01caa39f2a70ec02 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\System32\NLSData0007.dll Report Id: b4f7a7ae-0f92-11df-87fc-e5d65d8794c2 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-02T00:34:23.000000000Z" /> <EventRecordID>10689</EventRecordID> <Channel>Application</Channel> <Computer>ricky-win7</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7600.16385</Data> <Data>4a5bcdd0</Data> <Data>NLSData0007.dll</Data> <Data>6.1.7600.16385</Data> <Data>4a5bda88</Data> <Data>c0000005</Data> <Data>002141ba</Data> <Data>13a0</Data> <Data>01caa39f2a70ec02</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\System32\NLSData0007.dll</Data> <Data>b4f7a7ae-0f92-11df-87fc-e5d65d8794c2</Data> </EventData> </Event> If you are having the same error and arrived here from a Google search, please comment or add an answer detailing your progress on this, if any...

    Read the article

  • Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

    - by btucker
    When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

    Read the article

  • What other tool is using my hotkey?

    - by Sammy
    I use Greenshot for screenshots, and it's been nagging about some other software tool using the same hotkey. I started receiving this warning message about two days ago. It shows up each time I reboot and log on to Windows. The hotkey(s) "Ctrl + Shift + PrintScreen" could not be registered. This problem is probably caused by another tool claiming usage of the same hotkey(s)! You could either change your hotkey settings or deactivate/change the software making use of the hotkey(s). What's this all about? The only software I recently installed is CPU-Z Core Temp Speed Fan HD Tune Epson Print CD NetStress What I would like to know is how to find out what other tool is causing this conflict? Do I really have to uninstall each program, one by one, until there is no conflict anymore? I see no option for customizing any hotkeys in CPU-Z, and according to docs there are only a few keyboard shortcuts. These are F5 through F9, but they are no hotkeys. There is nothing in Core Temp, and from what I can see... nothing in Speed Fan. Is any of these programs known to use Ctrl + Shift + PrintScreen hotkey for screenshots? I am actually suspecting the Dropbox client. I think I saw a warning recently coming from Dropbox program, something to do with hotkeys or keyboard shortcuts. I see that it has an option for sharing screenshots under Preferences menu, but I see no option for hotkeys. Core Temp actually also has an option for taking screenshots (F9) but it's just that - a keyboard shortcut, not a hotkey. And again, there's no option actually for changing this setting in Options/Settings menu. How do you resolve this type of conflicts? Are there any general methods you can use to pinpoint the second conflicting software? Like... is there some Windows registry key that holds the hotkeys? Or is it just down to mere luck and trial and error? Addendum I forgot to mention, when I do use the Ctrl + Shift + PrintScreen hotkey, what happens is that the Greenshot context menu shows up, asking me where I want to save the screenshot. So it appears to be working. But I am still getting the darn warning every time I reboot and log on to Windows?! I actually tried changing the key bindings in Greenshot preferences, but after a reboot it seems to have returned back to the settings I had previously. Update I can't see any hotkey conflicts in the Widnows Hotkey Explorer. The aforementioned hotkey is reserved by Greenshot, and I don't see any other program using the same hotkey binding. But when I went into Greenshot preferences, this is what I discovered. As you can see it's the Greenshot itself that uses the same hotkey twice! I guess that's why no other program was listed above as using this hotkey. But how can Greenshot be so stupid to use the same hotkey more than once? I didn't do this! It's not my fault... I'm not that stupid. This is what it's set to right now: Capture full screen: Ctrl + Skift + Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Skift + Prntscrn Capture Internet Explorer: Ctrl + Skift + Prntscrn And this is my preferred setting: Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Capture Internet Explorer: I don't use any hotkey for "last region" and IE. But when I set this to my liking, as listed here, Greenshot gives me the same warning message, even as I tab through the hotkey entry fields. Sometimes it even gives me the warning when I just click Cancel button. This is really crazy! On the side note... You might have noticed that I have "update check" set to 0 (zero). This is because, in my experience, Greenshot changes all or only some of my preferences back to default settings whenever it automatically updates to a new version. So I opted to stay off updates to get rid of the problem. It has done so for the past three updates or so. I hoped to receive a new update that would fix the issue, but I think it still reverts back to default settings after each update to a new version, including setting default hotkeys. Update 2 I'll give you just one example of how Greenshot behaves. This is the dialog I have in front of me right now. As you can see, I have removed the last two hotkeys and changed the first one to my own liking. While I was clicking in the fields and removing the two hotkeys I was getting the warning message. So let's say I click in the "capture last region" field. Then I get this: Note that none of the entries include "Ctrl + Shift + PrintScreen" that it's warning about. Now I will change all the hotkeys so I get something like this: So now I'm using QWERTY letters for binding, like Ctrl+Alt+Q, Ctrl+Alt+W and so on. As far as I know no Windows program is using these. While I was clicking through the different fields it was giving me the warning. Now when I try to click OK to save the changes, it once again gives me a warning about "ctrl + shift + printscreen". Update 3 After setting the above key bindings (QWERTY) and saving changes, and then rebooting, the conflict seems to have been resolved. I was then able to set following key bindings. Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn I was not prompted with the warning message this time. Perhaps changing key binding required a system reboot? Sounds far fetched but that appears to be the case. I'm still not sure what caused this conflict, but I know for sure that it started after installing aforementioned programs. It might just have to do with Greenshot itself, and not some other program. Like I said, I know from experience that Greenshot likes to mess with users' settings after each update. I wouldn't be surprised if it was actually silently updated, even though I have specified not to check for updates, then it changed the key bindings back to defaults and caused a conflict with the hotkeys that were registered with the operating system previously. I rarely reboot the system, so that could have added to the conflict. Next time if I see this I will run Hotkey Explorer immediately and see if there is another program causing the conflict.

    Read the article

  • Backing up my data causes my server to crash using Symantec Backup Exec 12, or How I Came to Loathe Irony

    - by Kyle Noland
    I have a Dell PowerEdge 2850 running Windows Server 2003. It is the primary file server for one of my clients. I have another server also running Windows Server 2003 that acts as the core media server for Symantec Backup Exec 12. I recently upgraded from Backup Exec 11d to 12. This upgrade was necessary because we also just upgraded from Exchange 2003 to Exchange 2007. After the upgrade I had to push-install the new version 12 Backup Exec Remote Agents to each of the servers I am backing up (about 6 total). 5 of my servers are doing just fine, faithfully completing backups every night. My file server routinely crashes. Observations: When the server crashes, it does not blue screen, it just locks up completely. Even the mouse is unresponsive. If you leave the server locked up long enough, it will eventually reboot itself and hang on the Windows splash screen. There is absolutely zero useful Event Viewer evidence of a problem. The logs go from routine logging to an Unexplained Shutdown Event the next morning when I have to hard reset the server to get it to boot. 90% of the time the server does not boot cleanly, it hangs on the Windows splash screen. I don't have any light to shed here. When the server hangs all I can do is hard reset it and try again. Even after a successful boot and chkdsk /r operation, if you reboot the machine, you have a 90% chance it won't back up again cleanly. The back story: This server started crashing during nightly backups about a month ago. I tried everything I could think of to troubleshoot the problem and eventually had to give up because I could not keep coming to the office at 4 AM to try to get the server back online. One Friday I got lucky and the server stayed up for its entire full backup. I took this opportunity to restore the full backup to a temporary server I set up and switched all my users to the temporary. Then I reloaded the ailing file server. I kept all my users on the temporary file server for about 3 weeks. I installed the same Backup Exec Remote Agent and Trend Micro A/V client on the temporary server that I was using on the regular file server. During this time, I had absolutely no problems backing up the temporary server. I tested the reloaded file server extensively. I rebooted the server once an hour every day for 3 weeks trying to make it fail. It never did. I felt confident that the reload was the answer to my problems. I moved all of the data from the temporary server back to the regular server. I got 3 nightly backups out of it before it locked up again and started the familiar failure to boot cleanly behavior. This weekend I decided to monitor the file server through the entire backup job. I RDPd into the file server and also into the server running Backup Exec. On the file server I opened the Task Manager so I could view the processes and watch CPU and memory usage. Everything was running smoothly for about 60GB worth of backup. Then I noticed that the byte count of the backup job in Backup Exec had stopped progressing. I looked back over at my RDP session into the file server, and I was getting real time updates about CPU and memory usage still - both nearly 0%, which is unusual. Backups usually hover around 40% usage for the duration of the backup job. Let me reiterate this point: The screen was refreshing and I was getting real time Task Manager updates - until I clicked on the Start menu. The screen went black and the server locked up. In truth, I think the server had already locked up, the video card just hadn't figured it out yet. I went back into my bag of trick: driving to the office and hard reseting the server over and over again when it hangs up at the Windows splash screen. I did this for 2 hours without getting a successful boot. I started panicking because I did not have a decent backup to use to get everything back onto the working temporary file server. Once I exhausted everything I knew to do, I took a deep breath, booted to the Windows Server 2003 CD and performed a repair installation of Windows. The server came back up fine, with all of my data intact. I can now reboot the server at will and it will come back up cleanly. The problem is that I'm afraid as soon as I try to back that data up again I will back at square one. So let me sum things up: Here is what I've done so far to troubleshoot this server: Deleted and recreated the RAID 5 sets. Initialized the drives. Reloaded the server with a fresh Server 2003 install. Confirmed with Dell that I have installed the latest, Dell approved BIOS and NIC drivers. Uninstalled / reinstalled the Backup Exec Remote Agent. Uninstalled the Trend Micro A/V client. Configured the server not to reboot itself after a blue screen so I can see any stop error. I used to think the server was blue screening, but since I enabled this setting I now know that the server just completely locks up. Run chkdsk /r from the Windows Recovery Console. Several errors were found and corrected, but did not help my problem. Help confirm or deny the following assumptions: There are two problems at work here. Why the server is locking up in the first place, and why the server won't boot cleanly after a lockup. This is ultimately a software problem. The server works fine and can be rebooted cleanly all day long - until the first lockup - following a fresh OS load or even a Repair installation. This is not a problem with Backup Exec in general. All of my other servers back up just fine. For the record, all of the other servers run Server 2003, and some of them house more data than the file server in question here. Any help is appreciated. The irony is almost too much to bear. Backing up my data is what is jeopardizing it.

    Read the article

  • a friendly elaboratation on how iceweasel misses as recent request was discovered in post tut

    - by v3x3n
    I would like to specify what you asked about in how iceweasel misses on in hopes that you are interested in considering the answer to be valid considering the package should run efficient to a novice user especially when getting a first impression on a new software, browser, or package they are given by default. First let me say that I am very grateful for all debian has and continues to do for its user base and I am not complaining, only hoping that in mentioning such it will eventually aid in improving the disappointing experience iceweasel gave me in multiple ways right from the start of using it. I am sure tremendous amounts of hard work went into making it work as well as it does, and tremendous effort continues to go into IW like the rest of the package and distros such as this... Having said that, I do aim to keep my examples simple as possible but also explained in enough detail as to not leave out important info to get a full idea of my issue... (Thanks for understanding if I sound novice to debian, I am but continue to learn and advance by trial and error each day, and of course the wonderful help from all the great minds available here and there)... Well, my bone to pick (unfortunately as I disdain being a complainer when so much has been done for us, the end user) with IW is mainly 3 immediately noticed problems in offering me a smooth test drive (completely normal browsing conduct of your average user, I should indicate) as soon as I started out a task using IW (heading directly to google images and searched for a few web sized images, then saved a few (no more than 800 to 900 in dimensions, typically a normal procedure I would imagine) I experienced a horrendous reoccurring freeze and lag time that almost left me to kill the process more than once on each attempt and continued to compound so that by a few attempts later, even 1 single image save locked up the entire browser, ultimately giving up on my procedure in its simplicity with a bit of aggravation, if there was something I had done wrong on my end pre-attempt or during installation. Secondly, visiting video player sites in this case youtube will not allow for any video feed to play whatsoever and again, experienced a slight freezing that eventually dissipated as long as I didn't attempt to press play or reload another video trial... Very annoying and possibly related to my first issue (which could rely on my own lack of knowledge in setup config, but that troubles me if so).... Lastly as another user has stated already, in which brought you to ask them what exactly seemed to be the problem in the first place is also my final straw that broke the weasel's back, leading me here to find a solution to a updated version of firefox... being that iceweasel (an apparent build of firefox 17.x.x) leaving the user to find themselves out of luck when installing their favorite or much useful add-ons or plugins that aid their task or normal usage online.... As the other user clearly stated... there is almost zero options and barely any luck to find compatible plugins with such an outdated version still being used... I can only imagine if as a novoice or standard user to linux... and beginner to debian (which I am all for btw!) if I am discovering major conductivity issues which hinder normal user conduct right off the bat... that there is probably a bundle or more of security vulnerabilities that would unravel to me if I continued to give mr Hommey's package any further attention, or interest in continuing to use... This is a deal breaker on any account, unless all 3 of these issues stated are due to a very n00berish setting or lack thereof (which if that is the case, such was not properly stated for beginner in any place available by following installation tutorials such as LVM installers, which I felt lacked a clear understanding to someone who is trying to learn why and how, rather than, a fix to a potentially broken out of box installation... I really think that is irrelevant in any case however, as there is much step by step support regarding that kind of thing, just saying... its very challenging, along side a job to keep deadlines on, and the need to learn a better and more costomizible system, that was not as popularized when I became a dev via windows (OK OK I know thats a huge mistake and now I am way off original topic but anyway) Thanks very much for taking the time to read over this, and I hope it honestly gives you a few good and valid reasons for users wanting and seeking a way to get around iceweasel altogether... Finally, if I am missing something vital that renders all I've stated invalid or useless, please feel free to shove that elephant in the room my direction! Thanks for all you do, as I am sure it is very useful and dedicated, being you are a debian maintainer, and super user! Much love for intelligence, freedom and sharing the secrets of the web! May it remain unregulated and a good place to grow and learn for generations to come! Stay true! Take care now! -v3x (v3x @ gmx .com)

    Read the article

  • Most secure way to access my home Linux server while I am on the road? Specialized solution wanted

    - by Ace Paus
    I think many people may be in my situation. I travel on business with a laptop. And I need secure access to files from the office (which in my case is my home). The short version of my question: How can I make SSH/SFTP really secure when only one person needs to connect to the server from one laptop? In this situation, what special steps would make it almost impossible for anyone else to get online access to the server? A lot more details: I use Ubuntu Linux on both my laptop (KDE) and my home/office server. Connectivity is not a problem. I can tether to my phone's connection if needed. I need access to a large number of files (around 300 GB). I don't need all of them at once, but I don't know in advance which files I might need. These files contain confidential client info and personal info such as credit card numbers, so they must be secure. Given this, I don't want store all these files on Dropbox or Amazon AWS, or similar. I couldn't justify that cost anyway (Dropbox don't even publish prices for plans above 100 GB, and security is a concern). However, I am willing to spend some money on a proper solution. A VPN service, for example, might be part of the solution? Or other commercial services? I've heard about PogoPlug, but I don't know if there is a similar service that might address my security concerns? I could copy all my files to my laptop because it has the space. But then I have to sync between my home computer and my laptop and I found in the past that I'm not very good about doing this. And if my laptop is lost or stolen, my data would be on it. The laptop drive is an SSD and encryption solutions for SSD drives are not good. Therefore, it seems best to keep all my data on my Linux file server (which is safe at home). Is that a reasonable conclusion, or is anything connected to the Internet such a risk that I should just copy the data to the laptop (and maybe replace the SSD with an HDD, which reduces battery life and performance)? I view the risks of losing a laptop to be higher. I am not an obvious hacking target online. My home broadband is cable Internet, and it seems very reliable. So I want to know the best (reasonable) way to securely access my data (from my laptop) while on the road. I only need to access it from this one computer, although I may connect from either my phone's 3G/4G or via WiFi or some client's broadband, etc. So I won't know in advance which IP address I'll have. I am leaning toward a solution based on SSH and SFTP (or similar). SSH/SFTP would provided about all the functionality I anticipate needing. I would like to use SFTP and Dolphin to browse and download files. I'll use SSH and the terminal for anything else. My Linux file server is set up with OpenSSH. I think I have SSH relatively secured. I'm using Denyhosts too. But I want to go several steps further. I want to get the chances that anyone can get into my server as close to zero as possible while still allowing me to get access from the road. I'm not a sysadmin or programmer or real "superuser". I have to spend most of my time doing other things. I've heard about "port knocking" but I have never used it and I don't know how to implement it (although I'm willing to learn). I have already read a number of articles with titles such as: Top 20 OpenSSH Server Best Security Practices 20 Linux Server Hardening Security Tips Debian Linux Stop SSH User Hacking / Cracking Attacks with DenyHosts Software more... I have not implemented every single thing I've read about. I probably can't do that. But maybe there is something even better I can do in my situation because I only need access from a single laptop. I'm just one user. My server does not need to be accessible to the general public. Given all these facts, I'm hoping I can get some suggestions here that are within my capability to implement and that leverage these facts to create a great deal better security than general purpose suggestions in the articles above.

    Read the article

  • Why would Linux VM in vSphere ESXi 5.5 show dramatically increased disk i/o latency?

    - by mhucka
    I'm stumped and I hope someone else will recognize the symptoms of this problem. Hardware: new Dell T110 II, dual-core Pentium G860 2.9 GHz, onboard SATA controller, one new 500 GB 7200 RPM cabled hard drive inside the box, other drives inside but not mounted yet. No RAID. Software: fresh CentOS 6.5 virtual machine under VMware ESXi 5.5.0 (build 174 + vSphere Client). 2.5 GB RAM allocated. The disk is how CentOS offered to set it up, namely as a volume inside an LVM Volume Group, except that I skipped having a separate /home and simply have / and /boot. CentOS is patched up, ESXi patched up, latest VMware tools installed in the VM. No users on the system, no services running, no files on the disk but the OS installation. I'm interacting with the VM via the VM virtual console in vSphere Client. Before going further, I wanted to check that I configured things more or less reasonably. I ran the following command as root in a shell on the VM: for i in 1 2 3 4 5 6 7 8 9 10; do dd if=/dev/zero of=/test.img bs=8k count=256k conv=fdatasync done I.e., just repeat the dd command 10 times, which results in printing the transfer rate each time. The results are disturbing. It starts off well: 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.451 s, 105 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.4202 s, 105 MB/s ... but after 7-8 of these, it then prints 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GG) copied, 82.9779 s, 25.9 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 84.0396 s, 25.6 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 103.42 s, 20.8 MB/s If I wait a significant amount of time, say 30-45 minutes, and run it again, it again goes back to 105 MB/s, and after several rounds (sometimes a few, sometimes 10+), it drops to ~20-25 MB/s again. Plotting the disk latency in vSphere's interface, it shows periods of high disk latency hitting 1.2-1.5 seconds during the times that dd reports the low throughput. (And yes, things get pretty unresponsive while that's happening.) What could be causing this? I'm comfortable that it is not due to the disk failing, because I also had configured two other disks as an additional volume in the same system. At first I thought I did something wrong with that volume, but after commenting the volume out from /etc/fstab and rebooting, and trying the tests on / as shown above, it became clear that the problem is elsewhere. It is probably an ESXi configuration problem, but I'm not very experienced with ESXi. It's probably something stupid, but after trying to figure this out for many hours over multiple days, I can't find the problem, so I hope someone can point me in the right direction. (P.S.: yes, I know this hardware combo won't win any speed awards as a server, and I have reasons for using this low-end hardware and running a single VM, but I think that's besides the point for this question [unless it's actually a hardware problem].) ADDENDUM #1: Reading other answers such as this one made me try adding oflag=direct to dd. However, it makes no difference in the pattern of results: initially the numbers are higher for many rounds, then they drop to 20-25 MB/s. (The initial absolute numbers are in the 50 MB/s range.) ADDENDUM #2: Adding sync ; echo 3 > /proc/sys/vm/drop_caches into the loop does not make a difference at all. ADDENDUM #3: To take out further variables, I now run dd such that the file it creates is larger than the amount of RAM on the system. The new command is dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct. Initial throughput numbers with this version of the command are ~50 MB/s. They drop to 20-25 MB/s when things go south. ADDENDUM #4: Here is the output of iostat -d -m -x 1 running in another terminal window while performance is "good" and then again when it's "bad". (While this is going on, I'm running dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct.) First, when things are "good", it shows this: When things go "bad", iostat -d -m -x 1 shows this:

    Read the article

  • System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse request failed with HTTP status 40

    - by John Galt
    I am trying to make some enhancements to a production web app. After quite a bit of unit testing on my WinXP IIS 5.1 development machine, everything works on my localhost so I used the Visual Studio 2008 PUBLISH dialog on my Dev PC to push the following projects to a staging server: the primary web app the "primary" webservice (the home page tries to invoke this WS) a "secondary" webservice (not yet a problem because home page does not invoke this WS) I get the following when I try to browse to the home page of the web app typing this into my browser: link text Server Error in '/zVersion2' Application. The request failed with HTTP status 404: Not Found. Description: An unhandled exception occurred during the execution of the current web request.Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Net.WebException: The request failed with HTTP status 404: Not Found. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [WebException: The request failed with HTTP status 404: Not Found.] System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +431289 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +204 ProxyZipeeeService.WSZipeee.Zipeee.GetMessageByType(Int32 iMsgType) in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\ProxyZipeeeService\ProxyZipeeeService\Web References\WSZipeee\Reference.vb:2168 Zipeee.frmZipeee.LoadMessage() in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\Zipeee\frmZipeee.aspx.vb:43 Zipeee.frmZipeee.Page_Load(Object sender, EventArgs e) in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\Zipeee\frmZipeee.aspx.vb:33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +50 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627 Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3082 Here is a bit of the corresponding source code: Public wsZipeee As New ProxyZipeeeService.WSZipeee.Zipeee Dim dsStandardMsg As DataSet Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If Not Page.IsPostBack Then LoadMessage() End If End Sub Private Sub LoadMessage() Dim iCnt As Integer Dim iValue As Integer dsStandardMsg = wsZipeee.GetMessageByType(BizConstants.MsgType.Standard) End Sub I suspect I may have configured things incorrectly on the staging server. The staging server is Win Server 2003 ServicePack 2 running IIS 6.0. When I published the primary site and the 2 webservices on the staging server called MOJITO I created the physical directories for each on the D drive. Then using INETMGR, I configured the following virtual directories: zVersion2 zVersion2wsSQL zVersion2wsEmergency All of the above are configured to use a new application pool I setup and named zVersion2aspNet20. The default web site for this machine MOJITO is configured to use ASP.NET 1.1 and the IP address is set to (All Unassigned). The production versions of the latter 2 webservices run on the MOJITO machine (named ZipeeeService and EmergencyService respectively). Can my staging versions of the above webservices (named zVersion2wsSQL and zVersion2wsEmergency respectively) co-exist on the same web server with the same IP address? Please note that when I test the zVersion2wsSQL webservice independently (from INETMGR right-mouse and click Browse) it works as expected (i.e. presenting all the methods of the webservice) like this snippet: GetMessageByType MessageName="Get_x0020_Message_x0020_By_x0020_Type" I can test this webmethod by clicking on it and it presents the Test dialog (because it takes a simple datatype and I am invoking it on localhost (i.e. MOJITO): **Get Message By Type** **Test** To test the operation using the HTTP POST protocol, click the 'Invoke' button. Parameter Value iMsgType: _______ [INVOKE button] SOAP 1.1 ....etc. I fear I may have rambled with too much information so I will stop but I hope someone can help me as I cannot understand why this request results in a "not found". Thanks.

    Read the article

  • Loading PNGs into OpenGL performance issues - Java & JOGL much slower than C# & Tao.OpenGL

    - by Edward Cresswell
    I am noticing a large performance difference between Java & JOGL and C# & Tao.OpenGL when both loading PNGs from storage into memory, and when loading that BufferedImage (java) or Bitmap (C# - both are PNGs on hard drive) 'into' OpenGL. This difference is quite large, so I assumed I was doing something wrong, however after quite a lot of searching and trying different loading techniques I've been unable to reduce this difference. With Java I get an image loaded in 248ms and loaded into OpenGL in 728ms The same on C# takes 54ms to load the image, and 34ms to load/create texture. The image in question above is a PNG containing transparency, sized 7200x255, used for a 2D animated sprite. I realise the size is really quite ridiculous and am considering cutting up the sprite, however the large difference is still there (and confusing). On the Java side the code looks like this: BufferedImage image = ImageIO.read(new File(fileName)); texture = TextureIO.newTexture(image, false); texture.setTexParameteri(GL.GL_TEXTURE_MIN_FILTER, GL.GL_LINEAR); texture.setTexParameteri(GL.GL_TEXTURE_MAG_FILTER, GL.GL_LINEAR); The C# code uses: Bitmap t = new Bitmap(fileName); t.RotateFlip(RotateFlipType.RotateNoneFlipY); Rectangle r = new Rectangle(0, 0, t.Width, t.Height); BitmapData bd = t.LockBits(r, ImageLockMode.ReadOnly, PixelFormat.Format32bppArgb); Gl.glBindTexture(Gl.GL_TEXTURE_2D, tID); Gl.glTexImage2D(Gl.GL_TEXTURE_2D, 0, Gl.GL_RGBA, t.Width, t.Height, 0, Gl.GL_BGRA, Gl.GL_UNSIGNED_BYTE, bd.Scan0); Gl.glTexParameteri(Gl.GL_TEXTURE_2D, Gl.GL_TEXTURE_MIN_FILTER, Gl.GL_LINEAR); Gl.glTexParameteri(Gl.GL_TEXTURE_2D, Gl.GL_TEXTURE_MAG_FILTER, Gl.GL_LINEAR); t.UnlockBits(bd); t.Dispose(); After quite a lot of testing I can only come to the conclusion that Java/JOGL is just slower here - PNG reading might not be as quick, or that I'm still doing something wrong. Thanks. Edit2: I have found that creating a new BufferedImage with format TYPE_INT_ARGB_PRE decreases OpenGL texture load time by almost half - this includes having to create the new BufferedImage, getting the Graphics2D from it and then rendering the previously loaded image to it. Edit3: Benchmark results for 5 variations. I wrote a small benchmarking tool, the following results come from loading a set of 33 pngs, most are very wide, 5 times. testStart: ImageIO.read(file) -> TextureIO.newTexture(image) result: avg = 10250ms, total = 51251 testStart: ImageIO.read(bis) -> TextureIO.newTexture(image) result: avg = 10029ms, total = 50147 testStart: ImageIO.read(file) -> TextureIO.newTexture(argbImage) result: avg = 5343ms, total = 26717 testStart: ImageIO.read(bis) -> TextureIO.newTexture(argbImage) result: avg = 5534ms, total = 27673 testStart: TextureIO.newTexture(file) result: avg = 10395ms, total = 51979 ImageIO.read(bis) refers to the technique described in James Branigan's answer below. argbImage refers to the technique described in my previous edit: img = ImageIO.read(file); argbImg = new BufferedImage(img.getWidth(), img.getHeight(), TYPE_INT_ARGB_PRE); g = argbImg.createGraphics(); g.drawImage(img, 0, 0, null); texture = TextureIO.newTexture(argbImg, false); Any more methods of loading (either images from file, or images to OpenGL) would be appreciated, I will update these benchmarks.

    Read the article

  • How to group using XSLT

    - by AdRock
    I'm having trouble grouping a set of nodes. I've found an article that does work with grouping and i have tested it and it works on a small test stylesheet i have I now need to use it in my stylesheet where I only want to select node sets that have a specific value. What I want to do in my stylesheet is select all users who have a userlevel of 2 then to group them by the volunteer region. What happens at the minute is that it gets the right amount of users with userlevel 2 but doesn't print them. It just repeats the first user in the xml file. <?xml version="1.0" encoding="ISO-8859-1"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:key name="volunteers-by-region" match="volunteer" use="region" /> <xsl:template name="hoo" match="/"> <html> <head> <title>Registered Volunteers</title> <link rel="stylesheet" type="text/css" href="volunteer.css" /> </head> <body> <h1>Registered Volunteers</h1> <h3>Ordered by the username ascending</h3> <xsl:for-each select="folktask/member[user/account/userlevel='2']"> <xsl:for-each select="volunteer[count(. | key('volunteers-by-region', region)[1]) = 1]"> <xsl:sort select="region" /> <xsl:for-each select="key('volunteers-by-region', region)"> <xsl:sort select="folktask/member/user/personal/name" /> <div class="userdiv"> <xsl:call-template name="member_userid"> <xsl:with-param name="myid" select="/folktask/member/user/@id" /> </xsl:call-template> <xsl:call-template name="volunteer_volid"> <xsl:with-param name="volid" select="/folktask/member/volunteer/@id" /> </xsl:call-template> <xsl:call-template name="volunteer_role"> <xsl:with-param name="volrole" select="/folktask/member/volunteer/roles" /> </xsl:call-template> <xsl:call-template name="volunteer_region"> <xsl:with-param name="volloc" select="/folktask/member/volunteer/region" /> </xsl:call-template> </div> </xsl:for-each> </xsl:for-each> </xsl:for-each> <xsl:if test="position()=last()"> <div class="count"><h2>Total number of volunteers: <xsl:value-of select="count(/folktask/member/user/account/userlevel[text()=2])"/></h2></div> </xsl:if> </body> </html> </xsl:template> <xsl:template name="member_userid"> <xsl:param name="myid" select="'Not Available'" /> <div class="heading bold"><h2>USER ID: <xsl:value-of select="$myid" /></h2></div> </xsl:template> <xsl:template name="volunteer_volid"> <xsl:param name="volid" select="'Not Available'" /> <div class="heading2 bold"><h2>VOLUNTEER ID: <xsl:value-of select="$volid" /></h2></div> </xsl:template> <xsl:template name="volunteer_role"> <xsl:param name="volrole" select="'Not Available'" /> <div class="small bold">ROLES:</div> <div class="large"> <xsl:choose> <xsl:when test="string-length($volrole)!=0"> <xsl:value-of select="$volrole" /> </xsl:when> <xsl:otherwise> <xsl:text> </xsl:text> </xsl:otherwise> </xsl:choose> </div> </xsl:template> <xsl:template name="volunteer_region"> <xsl:param name="volloc" select="'Not Available'" /> <div class="small bold">REGION:</div> <div class="large"><xsl:value-of select="$volloc" /></div> </xsl:template> </xsl:stylesheet> here is my full xml file <?xml version="1.0" encoding="ISO-8859-1" ?> <?xml-stylesheet type="text/xsl" href="volunteers.xsl"?> <folktask xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="folktask.xsd"> <member> <user id="1"> <personal> <name>Abbie Hunt</name> <sex>Female</sex> <address1>108 Access Road</address1> <address2></address2> <city>Wells</city> <county>Somerset</county> <postcode>BA5 8GH</postcode> <telephone>01528927616</telephone> <mobile>07085252492</mobile> <email>[email protected]</email> </personal> <account> <username>AdRock</username> <password>269eb625e2f0cf6fae9a29434c12a89f</password> <userlevel>4</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="1"> <roles></roles> <region>South West</region> </volunteer> </member> <member> <user id="2"> <personal> <name>Aidan Harris</name> <sex>Male</sex> <address1>103 Aiken Street</address1> <address2></address2> <city>Chichester</city> <county>Sussex</county> <postcode>PO19 4DS</postcode> <telephone>01905149894</telephone> <mobile>07784467941</mobile> <email>[email protected]</email> </personal> <account> <username>AmbientExpert</username> <password>8e64214160e9dd14ae2a6d9f700004a6</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="2"> <roles>Van Driver,gas Fitter</roles> <region>South Central</region> </volunteer> </member> <member> <user id="3"> <personal> <name>Skye Saunders</name> <sex>Female</sex> <address1>31 Anns Court</address1> <address2></address2> <city>Cirencester</city> <county>Gloucestershire</county> <postcode>GL7 1JG</postcode> <telephone>01958303514</telephone> <mobile>07260491667</mobile> <email>[email protected]</email> </personal> <account> <username>BigUndecided</username> <password>ea297847f80e046ca24a8621f4068594</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="3"> <roles>Scaffold Erector</roles> <region>South West</region> </volunteer> </member> <member> <user id="4"> <personal> <name>Connor Lawson</name> <sex>Male</sex> <address1>12 Ash Way</address1> <address2></address2> <city>Swindon</city> <county>Wiltshire</county> <postcode>SN3 6GS</postcode> <telephone>01791928119</telephone> <mobile>07338695664</mobile> <email>[email protected]</email> </personal> <account> <username>iTuneStinker</username> <password>3a1f5fda21a07bfff20c41272bae7192</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="1"> <event> <eventname>Oxford Folk Festival</eventname> <url>http://www.oxfordfolkfestival.com/</url> <datefrom>2010-04-07</datefrom> <dateto>2010-04-09</dateto> <location>Oxford</location> <eventpostcode>OX1 9BE</eventpostcode> <additional>Oxford Folk Festival is going into it's third year in 2006. As well as needing volunteers to steward for the event on the weekend itself, we would be delighted to hear from people willing to help in year round festival work such as stuffing envelopes for mailings, poster and leaflet distribution, and stewarding duties at festival pre-events.</additional> <coords> <lat>51.735640</lat> <lng>-1.276136</lng> </coords> </event> <contact> <conname>Stuart Vincent</conname> <conaddress1>P.O. Box 642</conaddress1> <conaddress2></conaddress2> <concity>Oxford</concity> <concounty>Bedfordshire</concounty> <conpostcode>OX1 3BY</conpostcode> <contelephone>01865 79073</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="5"> <personal> <name>Lewis King</name> <sex>Male</sex> <address1>67 Arbors Way</address1> <address2></address2> <city>Sherborne</city> <county>Dorset</county> <postcode>DT9 0GS</postcode> <telephone>01446139701</telephone> <mobile>07292614033</mobile> <email>[email protected]</email> </personal> <account> <username>Runninglife</username> <password>98fab0a27c34ddb2b0618bc184d4331d</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="4"> <roles>Van Driver</roles> <region>South West</region> </volunteer> </member> <member> <user id="6"> <personal> <name>Cameron Lee</name> <sex>Male</sex> <address1>77 Arrington Road</address1> <address2></address2> <city>Solihull</city> <county>Warwickshire</county> <postcode>B90 6FG</postcode> <telephone>01435158624</telephone> <mobile>07789503179</mobile> <email>[email protected]</email> </personal> <account> <username>love2Mixer</username> <password>1df752d54876928639cea07ce036a9c0</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="5"> <roles>Fire Warden</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="7"> <personal> <name>Lexie Dean</name> <sex>Female</sex> <address1>38 Bloomfield Court</address1> <address2></address2> <city>Windermere</city> <county>Westmorland</county> <postcode>LA23 8BM</postcode> <telephone>01781207188</telephone> <mobile>07127461231</mobile> <email>[email protected]</email> </personal> <account> <username>MailNetworker</username> <password>0e070701839e612bf46af4421db4f44b</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="2"> <event> <eventname>Middlewich Folk And Boat Festival</eventname> <url>http://midfest.org.uk/mfab/</url> <datefrom>2010-06-16</datefrom> <dateto>2010-06-18</dateto> <location>Middlewich</location> <eventpostcode>CW10 9BX</eventpostcode> <additional>We welcome stewards staying on campsite or boats.</additional> <coords> <lat>53.190562</lat> <lng>-2.444926</lng> </coords> </event> <contact> <conname>Festival Committee</conname> <conaddress1>PO Box 141</conaddress1> <conaddress2></conaddress2> <concity>Winsford</concity> <concounty>Cheshire</concounty> <conpostcode>CW10 9WB</conpostcode> <contelephone>07092 39050</contelephone> <conmobile>07092 39050</conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="8"> <personal> <name>Liam Chapman</name> <sex>Male</sex> <address1>99 Black Water Drive</address1> <address2></address2> <city>St.Austell</city> <county>Cornwall</county> <postcode>PL25 3GF</postcode> <telephone>01835629418</telephone> <mobile>07695179069</mobile> <email>[email protected]</email> </personal> <account> <username>GreenWimp</username> <password>1fe3df99a841dc4f723d21af89e0990f</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="9"> <personal> <name>Brandon Harrison</name> <sex>Male</sex> <address1>41 Arlington Way</address1> <address2></address2> <city>Dorchester</city> <county>Dorset</county> <postcode>DT1 3JS</postcode> <telephone>01293626735</telephone> <mobile>07277145760</mobile> <email>[email protected]</email> </personal> <account> <username>LovelyStar</username> <password>8b53b66f323aa5e6a083edb4fd44456b</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="10"> <personal> <name>Samuel Young</name> <sex>Male</sex> <address1>102 Bailey Hill Road</address1> <address2></address2> <city>Wolverhampton</city> <county>Staffordshire</county> <postcode>WV7 8HS</postcode> <telephone>01594531382</telephone> <mobile>07544663654</mobile> <email>[email protected]</email> </personal> <account> <username>GuruSassy</username> <password>00da02da6c143c3d136bf60b8bfcf43e</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="6"> <roles>Fire Warden</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="11"> <personal> <name>Alexander Harris</name> <sex>Male</sex> <address1>93 Beguine Drive</address1> <address2></address2> <city>Winchester</city> <county>Hampshire</county> <postcode>S23 2FD</postcode> <telephone>01452496582</telephone> <mobile>07353867291</mobile> <email>[email protected]</email> </personal> <account> <username>GuitarExpert</username> <password>0102ad3740028e155925e9918ead3bde</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="7"> <roles>Scaffold Erector</roles> <region>North East</region> </volunteer> </member> <member> <user id="12"> <personal> <name>Tyler Mcdonald</name> <sex>Male</sex> <address1>44 Baker Road</address1> <address2></address2> <city>Bromley</city> <county>Kent</county> <postcode>BR1 2GD</postcode> <telephone>01918704546</telephone> <mobile>07314062451</mobile> <email>[email protected]</email> </personal> <account> <username>WildWish</username> <password>073220bb5e9a12ad202bb7d94dcc86f7</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="13"> <personal> <name>Skye Mason</name> <sex>Female</sex> <address1>56 Cedar Creek Church Road</address1> <address2></address2> <city>Bracknell</city> <county>Berkshire</county> <postcode>RG12 1AQ</postcode> <telephone>01787607618</telephone> <mobile>07540218868</mobile> <email>[email protected]</email> </personal> <account> <username>PizzaDork</username> <password>74c54937ee7051ee7f4ebc11296ed531</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="14"> <personal> <name>Maryam Rose</name> <sex>Female</sex> <address1>98 Baptist Circle</address1> <address2></address2> <city>Newbury</city> <county>Berkshire</county> <postcode>RG14 8DF</postcode> <telephone>01691317999</telephone> <mobile>07212477154</mobile> <email>[email protected]</email> </personal> <account> <username>SexTech</username> <password>f1c21f9f1e999da97d7dc460bb876fcf</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="3"> <event> <eventname>Birdsedge Village Festival</eventname> <url>http://www.birdsedge.co.uk/</url> <datefrom>2010-07-08</datefrom> <dateto>2010-07-09</dateto> <location>Birdsedge</location> <eventpostcode>HD8 8XT</eventpostcode> <additional></additional> <coords> <lat>53.565644</lat> <lng>-1.696196</lng> </coords> </event> <contact> <conname>Jacey Bedford</conname> <conaddress1>Penistone Road</conaddress1> <conaddress2>Birdsedge</conaddress2> <concity>Huddersfield</concity> <concounty>West Yorkshire</concounty> <conpostcode>HD8 8XT</conpostcode> <contelephone>01484 60623</contelephone> <conmobile></conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="15"> <personal> <name>Lexie Rogers</name> <sex>Female</sex> <address1>38 Bishop Road</address1> <address2></address2> <city>Matlock</city> <county>Derbyshire</county> <postcode>DE4 1BX</postcode> <telephone>01961168823</telephone> <mobile>07170855351</mobile> <email>[email protected]</email> </personal> <account> <username>ShipBurglar</username> <password>cc190488a95667cb117e20bc6c7c330e</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="8"> <roles>Gas Fitter</roles> <region>Midlands</region> </volunteer> </member> <member> <user id="16"> <personal> <name>Noah Parker</name> <sex>Male</sex> <address1>112 Canty Road</address1> <address2></address2> <city>Keswick</city> <county>Cumberland</county> <postcode>CA12 4TR</postcode> <telephone>01931272522</telephone> <mobile>07610026576</mobile> <email>[email protected]</email> </personal> <account> <username>AwsomeMoon</username> <password>50b770539bdf08543f15778fc7a6f188</password> <userlevel>2</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <volunteer id="9"> <roles>Van Driver</roles> <region>North West</region> </volunteer> </member> <member> <user id="17"> <personal> <name>Elliot Mitchell</name> <sex>Male</sex> <address1>102 Brown Loop</address1> <address2></address2> <city>Grimsby</city> <county>Lincolnshire</county> <postcode>OX16 4QP</postcode> <telephone>01212971319</telephone> <mobile>07544663654</mobile> <email>[email protected]</email> </personal> <account> <username>msBasher</username> <password>c38fad85badcdff6e3559ef38656305d</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="18"> <personal> <name>Scarlett Rose</name> <sex>Female</sex> <address1>93 Cedar Lane</address1> <address2></address2> <city>Stourbridge</city> <county>Warminster</county> <postcode>DY8 4NX</postcode> <telephone>01537477435</telephone> <mobile>07353867291</mobile> <email>[email protected]</email> </personal> <account> <username>MakeupWimp</username> <password>16a9b7910fc34304c1d1a6a1b0c31502</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="19"> <personal> <name>Katie Butler</name> <sex>Female</sex> <address1>44 Boulder Crest Road</address1> <address2></address2> <city>Bungay</city> <county>Suffolk</county> <postcode>NR35 1LT</postcode> <telephone>01419124094</telephone> <mobile>07314062451</mobile> <email>[email protected]</email> </personal> <account> <username>TomatoCrunch</username> <password>d7eba53443ec4ddcee69ed71b2023fc0</password> <userlevel>1</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> </member> <member> <user id="20"> <personal> <name>Jayden Richards</name> <sex>Male</sex> <address1>56 Corson Trail</address1> <address2></address2> <city>Sandy</city> <county>Bedfordshire</county> <postcode>SG19 6DF</postcode> <telephone>01882134438</telephone> <mobile>07540218868</mobile> <email>[email protected]</email> </personal> <account> <username>nightmareTwig</username> <password>8a9c08c7b6473493e8a5da15dd541025</password> <userlevel>3</userlevel> <signupdate>2010-03-26T09:23:50</signupdate> </account> </user> <festival id="4"> <event> <eventname>East Barnet Festival</eventname> <url>http://www.eastbarnetfestival.org.uk</url> <datefrom>2010-07-01</datefrom> <dateto>2010-07-03</dateto> <location>East Barnet</location> <eventpostcode>EN4 8TB</eventpostcode> <additional></additional> <coords> <lat>51.641556</lat> <lng>-0.163018</lng> </coords> </event> <contact> <conname>East Barnet Festival Commitee</conname> <conaddress1>Oak Hill Park</conaddress1> <conaddress2>Church Hill Road</conaddress2> <concity>East Barnet</concity> <concounty>Hertfordshire</concounty> <conpostcode>EN4 8TB</conpostcode> <contelephone>07071781745</contelephone> <conmobile>07071781745</conmobile> <fax></fax> <conemail>[email protected]</conemail> </contact> </festival> </member> <member> <user id="21"> <personal> <name>Abbie Jackson</name> <sex>Female</sex> <address1>98 Briarwood Lane</address1> <address2></address2> <city>Weymouth</city> <county>Dorset</county> <postcode>DT3 6TS</postcode> <telephone>01575629969</telephone> <mobile>07212477154</mobile> <email>[email protected]</email> </personal> <account> <username>CrazyBlockhead</username> <password>4ce56fb13d043be605037ace4fbd9fa5</password> <userlevel>2</u

    Read the article

  • python/pip error on osx

    - by Ibrahim Chawa
    I've recently purchased a new hard drive and installed a clean copy of OS X Mavericks. I installed python using homebrew and i need to create a python virtual environment. But when ever i try to run any command using pip, I get this error. I haven't been able to find a solution online for this problem. Any reference would be appreciated. Here is the error I'm getting. ERROR:root:code for hash md5 was not found. Traceback (most recent call last): File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 139, in <module> globals()[__func_name] = __get_hash(__func_name) File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 91, in __get_builtin_constructor raise ValueError('unsupported hash type ' + name) ValueError: unsupported hash type md5 ERROR:root:code for hash sha1 was not found. Traceback (most recent call last): File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 139, in <module> globals()[__func_name] = __get_hash(__func_name) File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 91, in __get_builtin_constructor raise ValueError('unsupported hash type ' + name) ValueError: unsupported hash type sha1 ERROR:root:code for hash sha224 was not found. Traceback (most recent call last): File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 139, in <module> globals()[__func_name] = __get_hash(__func_name) File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 91, in __get_builtin_constructor raise ValueError('unsupported hash type ' + name) ValueError: unsupported hash type sha224 ERROR:root:code for hash sha256 was not found. Traceback (most recent call last): File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 139, in <module> globals()[__func_name] = __get_hash(__func_name) File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 91, in __get_builtin_constructor raise ValueError('unsupported hash type ' + name) ValueError: unsupported hash type sha256 ERROR:root:code for hash sha384 was not found. Traceback (most recent call last): File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 139, in <module> globals()[__func_name] = __get_hash(__func_name) File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 91, in __get_builtin_constructor raise ValueError('unsupported hash type ' + name) ValueError: unsupported hash type sha384 ERROR:root:code for hash sha512 was not found. Traceback (most recent call last): File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 139, in <module> globals()[__func_name] = __get_hash(__func_name) File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/hashlib.py", line 91, in __get_builtin_constructor raise ValueError('unsupported hash type ' + name) ValueError: unsupported hash type sha512 Traceback (most recent call last): File "/usr/local/bin/pip", line 9, in <module> load_entry_point('pip==1.5.6', 'console_scripts', 'pip')() File "build/bdist.macosx-10.9-x86_64/egg/pkg_resources.py", line 356, in load_entry_point File "build/bdist.macosx-10.9-x86_64/egg/pkg_resources.py", line 2439, in load_entry_point File "build/bdist.macosx-10.9-x86_64/egg/pkg_resources.py", line 2155, in load File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/pip-1.5.6-py2.7.egg/pip/__init__.py", line 10, in <module> from pip.util import get_installed_distributions, get_prog File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/pip-1.5.6-py2.7.egg/pip/util.py", line 18, in <module> from pip._vendor.distlib import version File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/pip-1.5.6-py2.7.egg/pip/_vendor/distlib/version.py", line 14, in <module> from .compat import string_types File "/usr/local/Cellar/python/2.7.8/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/pip-1.5.6-py2.7.egg/pip/_vendor/distlib/compat.py", line 31, in <module> from urllib2 import (Request, urlopen, URLError, HTTPError, ImportError: cannot import name HTTPSHandler If you need any extra information from me let me know, this is my first time posting a question here. Thanks.

    Read the article

  • Excel Macro Runtime error 428 in Excel 2003

    - by Adam
    Hi I have created a xlt excel template which works fine in Excel 2007 under compatibility mode and shows no errors on compatibility check. The template runs a number of Macros which creates pivot tables and charts. When a colleague tries to run the same xlt on excel 2003 they get a Runtime error 428 (Object does not support this property or method). The runtime error fails at this point; ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Any help would be appreciated. This is the full Macro; Sub Auto_Open() ' ' ImportData Macro ' Macro to import data, Data must be in your local D: Drive and named raw.csv ' ' Sheets("raw").Select With ActiveSheet.QueryTables.Add(Connection:= _ "TEXT;d:\raw.csv", Destination:=Range _ ("$A$1")) .Name = "raw_1" .FieldNames = True .RowNumbers = False .FillAdjacentFormulas = False .PreserveFormatting = True .RefreshOnFileOpen = False .RefreshStyle = xlInsertDeleteCells .SavePassword = False .SaveData = True .AdjustColumnWidth = True .RefreshPeriod = 0 .TextFilePromptOnRefresh = False .TextFilePlatform = 850 .TextFileStartRow = 1 .TextFileParseType = xlDelimited .TextFileTextQualifier = xlTextQualifierDoubleQuote .TextFileConsecutiveDelimiter = False .TextFileTabDelimiter = False .TextFileSemicolonDelimiter = False .TextFileCommaDelimiter = True .TextFileSpaceDelimiter = False .TextFileColumnDataTypes = Array(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, _ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) .TextFileTrailingMinusNumbers = True .Refresh BackgroundQuery:=False End With ' ' AddMonthColumn Macro ' ' Sheets("raw").Select Range("AK1").Select ActiveCell.FormulaR1C1 = "Month" Range("AK2").FormulaR1C1 = "=DATE(YEAR(RC[-36]),MONTH(RC[-36]),1)" LastRow = ActiveSheet.UsedRange.Rows.Count Range("AK2").AutoFill Destination:=Range("AK2:AK" & LastRow) Columns("AK:AK").EntireColumn.AutoFit Columns("AK:AK").Select Selection.NumberFormat = "mmmm" With Selection .HorizontalAlignment = xlCenter End With Columns("AK:AK").EntireColumn.AutoFit Selection.Copy Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False ' ' Add Report Information [Text] ' Sheets("Frontpage").Select Range("A2:N2").Select Selection.Merge ActiveCell.FormulaR1C1 = "Service Activity Report" With Selection.Font .Size = 20 End With Range("A3:N3").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Customer Name") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With Range("A4:N4").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Date Range dd/mm/yyyy - dd/mm/yyyy") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With ' ' IncidentsbyPriority Macro ' ' Sheets("Frontpage").Select Range("A7").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(7, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$7:$H$22") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable2").PivotFields("Priority") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable2").AddDataField ActiveSheet.PivotTables( _ "PivotTable2").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentsbyPriority" ActiveChart.ChartTitle.Text = "Incidents by Priority" Dim RngToCover As Range Dim ChtOb As ChartObject Set RngToCover = ActiveSheet.Range("D7:L16") Set ChtOb = ActiveSheet.ChartObjects("IncidentsbyPriority") ChtOb.Height = RngToCover.Height ' resize ChtOb.Width = RngToCover.Width ' resize ChtOb.Top = RngToCover.Top ' reposition ChtOb.Left = RngToCover.Left ' reposition ' ' IncidentbyMonth Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R18C1", TableName:="PivotTable4", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(18, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$18:$H$38") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable4").PivotFields("Month") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable4").AddDataField ActiveSheet.PivotTables( _ "PivotTable4").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyMonth" ActiveChart.ChartTitle.Text = "Incidents by Month" Dim RngToCover2 As Range Dim ChtOb2 As ChartObject Set RngToCover2 = ActiveSheet.Range("D18:L30") Set ChtOb2 = ActiveSheet.ChartObjects("IncidentbyMonth") ChtOb2.Height = RngToCover2.Height ' resize ChtOb2.Width = RngToCover2.Width ' resize ChtOb2.Top = RngToCover2.Top ' reposition ChtOb2.Left = RngToCover2.Left ' reposition ' ' IncidentbyCategory Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R38C1", TableName:="PivotTable6", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(38, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$38:$H$119") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 2") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 3") .Orientation = xlPageField .Position = 1 End With ActiveSheet.PivotTables("PivotTable6").AddDataField ActiveSheet.PivotTables( _ "PivotTable6").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyCategory" ActiveChart.ChartTitle.Text = "Incidents by Category" Dim RngToCover3 As Range Dim ChtOb3 As ChartObject Set RngToCover3 = ActiveSheet.Range("D38:L56") Set ChtOb3 = ActiveSheet.ChartObjects("IncidentbyCategory") ChtOb3.Height = RngToCover3.Height ' resize ChtOb3.Width = RngToCover3.Width ' resize ChtOb3.Top = RngToCover3.Top ' reposition ChtOb3.Left = RngToCover3.Left ' reposition ' ' IncidentsbySiteandPriority Macro ' ' Sheets("Frontpage").Select Range("A71").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R71C1", TableName:="PivotTable3", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(71, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$71:$H$90") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable3").PivotFields("Site Name") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable3").PivotFields("Priority") .Orientation = xlColumnField .Position = 1 End With ActiveSheet.PivotTables("PivotTable3").AddDataField ActiveSheet.PivotTables( _ "PivotTable3").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbySiteandPriority" ' ActiveChart.ChartTitle.Text = "Incidents by Site and Priority" Dim RngToCover4 As Range Dim ChtOb4 As ChartObject Set RngToCover4 = ActiveSheet.Range("H71:O91") Set ChtOb4 = ActiveSheet.ChartObjects("IncidentbySiteandPriority") ChtOb4.Height = RngToCover4.Height ' resize ChtOb4.Width = RngToCover4.Width ' resize ChtOb4.Top = RngToCover4.Top ' reposition ChtOb4.Left = RngToCover4.Left ' reposition Columns("A:G").Select Range("A52").Activate Columns("A:G").EntireColumn.AutoFit End Sub

    Read the article

  • What precautions should you take when a senior employee leaves?

    - by Mahin
    EDIT : I agree one should check the reasons, why a senior level employee is leaving. But I am interested in knowing the official/management/technical/legal steps one should take after its decided that he is leaving, so that the life after him is smooth. What are the steps management should take when a senior programmer/team lead leaves your company. Some of them which I have thought about are : 1) If He used to manage hosting and domains stuff, change passwords of domain control panels and hosting panels. 2) If your published web sites have maintenance account and he is aware of credentials of that account then change this details also. 3) Suspend mail account for some time and forward all eMails of that account to some ex-employee account. After some time close that account. What are the other things one should check. I am expecting the answer to be a general check list one should follow. It should include both technical scenarios and management scenarios. Notable Suggestions so far : Effectively transfer the responsibilities of that employee to another one without causing any potential delay in your work. Protect your source code. If possible Make them to sign something to say that they don't have copies of source code.. You can also consider NDA here. Use the Notice Period to train his replacement. Now any new code to the project will be done by replacement with the help of Guy who is leaving. Ask him to create a document of things he thinks you should know. Make sure he checks everything in now and then any checkout will only be done by the replacement. Emails, copy off his email account to a pst.file (this assumes Outlook), Make this file available to his replacement. the employee should probably be given a chance to scrub the email. if you are going to keep his account open for whatever reason, check that no rules are created that forward incoming emails to an alternate address. Copy the hard drive of his computer to a network location and have someone senior go through and see if there are any files (drafts of performance reviews or other sensitive issues ) on it that someone else might need. Clearance from Accounts,Finance,Security,Library etc departments.Obtain all company property, laptops, keys, etc. If there is no reason not to, you should reward a departing person for their many years of service. Write them letters of recommendation (even if they already have a new job lined up).Say goodbye, and keep the door open. Make sure any outside clients know that the departing employee is not their main contact anymore. Never neglect the exit interview/debriefing. Confirm the last day of employment so that there is no misunderstanding Inform H/R if the employee is on H1B status, there is paperwork required to notify the government when an H1B employee leaves. Depending on how senior / what position, you might spend some time convincing him not to take the rest of the engineering staff with him. Make sure he spends his last days on a good note, because if he is not leaving on a good note, he can easily pollute the mind of his colleagues. Best Regards, Mahin Gupta EDIT : Now offered a bounty on it to get more detailed responses and practical suggestions.

    Read the article

  • New project created with Flex Mojo's archetype throws Cannot Find Parent Project-Maven Exception

    - by ignorant
    This is probably a silly question but I just cant seem to figure out. I'm completely new to flex and maven. Maven 2.2.1: Maven 2.2.1 unzipped,M2_HOME set and repository altered to point to different drive location in settings.xml Flex 4.0: Installed Created a multi-modular webapp project using flexmojo: mvn archetype:generate -DarchetypeRepository=http://repository.sonatype.org/content/groups/flexgroup -DarchetypeGroupId=org.sonatype.flexmojos -DarchetypeArtifactId=flexmojos-archetypes-modular-webapp -DarchetypeVersion=RELEASE with following options groupId=com.test artifactId=test version=1.0-snapshot package=com.tests * Creates * test |-- pom.xml |--swc -pom.xml |--swf -pom.xml `--war -pom.xml Parent pom has swc, swf, war as modules. Dependency is war-swf-swc. With parent artifactId of swf, swc, war set to swf, swc, test respectively. On executing mvn on test folder(for that matter clean or anything) I get this following error. G:\Projects\testmvn -e + Error stacktraces are turned on. [INFO] Scanning for projects... Downloading: http://repo1.maven.org/maven2/com/test/swc/1.0-snapshot/swc-1.0-snapshot.pom [INFO] Unable to find resource 'com.test:swc:pom:1.0-snapshot' in repository central (http://repo1.maven.org/maven2) [INFO] ------------------------------------------------------------------------ [ERROR] FATAL ERROR [INFO] ------------------------------------------------------------------------ [INFO] Failed to resolve artifact. GroupId: com.test ArtifactId: swc Version: 1.0-snapshot Reason: Unable to download the artifact from any repository com.test:swc:pom:1.0-snapshot from the specified remote repositories: central (http://repo1.maven.org/maven2) [INFO] ------------------------------------------------------------------------ [INFO] Trace org.apache.maven.reactor.MavenExecutionException: Cannot find parent: com.test:swc for project: com.test:swc-swc:swc:1.0-snapshot for project com.test:swc-swc:swc:1.0-snapshot at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:404) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:272) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:60) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: org.apache.maven.project.ProjectBuildingException: Cannot find parent: com.test:swc for project: com.test:swc-swc:swc:1.0-snapshot for project com.test:swc-swc:swc:1.0-snapshot at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:1396) at org.apache.maven.project.DefaultMavenProjectBuilder.buildInternal(DefaultMavenProjectBuilder.java:823) at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFileInternal(DefaultMavenProjectBuilder.java:508) at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:200) at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:604) at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:487) at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:560) at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:391) ... 12 more Caused by: org.apache.maven.project.ProjectBuildingException: POM 'com.test:swc' not found in repository: Unable to download the artifact from any repository com.test:swc:pom:1.0-snapshot from the specified remote repositories: central (http://repo1.maven.org/maven2) for project com.test:swc at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:605) at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:1392) ... 19 more Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException: Unable to download the artifact from any repository com.test:swc:pom:1.0-snapshot from the specified remote repositories: central (http://repo1.maven.org/maven2) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:228) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:90) at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:558) ... 20 more Caused by: org.apache.maven.wagon.ResourceDoesNotExistException: Unable to download the artifact from any repository at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:404) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:216) ... 22 more [INFO] ------------------------------------------------------------------------ [INFO] Total time: 1 second [INFO] Finished at: Tue Jun 15 19:22:15 GMT+02:00 2010 [INFO] Final Memory: 1M/2M [INFO] ------------------------------------------------------------------------ Looks like its trying to download the project from maven's central repository instead of building it. What am I missing?

    Read the article

  • Issue with translating a delegate function from c# to vb.net for use with Google OAuth 2

    - by Jeremy
    I've been trying to translate a Google OAuth 2 example from C# to Vb.net for a co-worker's project. I'm having on end of issues translating the following methods: private OAuth2Authenticator<WebServerClient> CreateAuthenticator() { // Register the authenticator. var provider = new WebServerClient(GoogleAuthenticationServer.Description); provider.ClientIdentifier = ClientCredentials.ClientID; provider.ClientSecret = ClientCredentials.ClientSecret; var authenticator = new OAuth2Authenticator<WebServerClient>(provider, GetAuthorization) { NoCaching = true }; return authenticator; } private IAuthorizationState GetAuthorization(WebServerClient client) { // If this user is already authenticated, then just return the auth state. IAuthorizationState state = AuthState; if (state != null) { return state; } // Check if an authorization request already is in progress. state = client.ProcessUserAuthorization(new HttpRequestInfo(HttpContext.Current.Request)); if (state != null && (!string.IsNullOrEmpty(state.AccessToken) || !string.IsNullOrEmpty(state.RefreshToken))) { // Store and return the credentials. HttpContext.Current.Session["AUTH_STATE"] = _state = state; return state; } // Otherwise do a new authorization request. string scope = TasksService.Scopes.TasksReadonly.GetStringValue(); OutgoingWebResponse response = client.PrepareRequestUserAuthorization(new[] { scope }); response.Send(); // Will throw a ThreadAbortException to prevent sending another response. return null; } The main issue being this line: var authenticator = new OAuth2Authenticator<WebServerClient>(provider, GetAuthorization) { NoCaching = true }; The Method signature reads as for this particular line reads as follows: Public Sub New(tokenProvider As TClient, authProvider As System.Func(Of TClient, DotNetOpenAuth.OAuth2.IAuthorizationState)) My understanding of Delegate functions in VB.net isn't the greatest. However I have read over all of the MSDN documentation and other relevant resources on the web, but I'm still stuck as to how to translate this particular line. So far all of my attempts have resulted in either the a cast error (see below) or no call to GetAuthorization. The Code (vb.net on .net 3.5) Private Function CreateAuthenticator() As OAuth2Authenticator(Of WebServerClient) ' Register the authenticator. Dim client As New WebServerClient(GoogleAuthenticationServer.Description, oauth.ClientID, oauth.ClientSecret) Dim authDelegate As Func(Of WebServerClient, IAuthorizationState) = AddressOf GetAuthorization Dim authenticator = New OAuth2Authenticator(Of WebServerClient)(client, authDelegate) With {.NoCaching = True} 'Dim authenticator = New OAuth2Authenticator(Of WebServerClient)(client, GetAuthorization(client)) With {.NoCaching = True} 'Dim authenticator = New OAuth2Authenticator(Of WebServerClient)(client, New Func(Of WebServerClient, IAuthorizationState)(Function(c) GetAuthorization(c))) With {.NoCaching = True} 'Dim authenticator = New OAuth2Authenticator(Of WebServerClient)(client, New Func(Of WebServerClient, IAuthorizationState)(AddressOf GetAuthorization)) With {.NoCaching = True} Return authenticator End Function Private Function GetAuthorization(arg As WebServerClient) As IAuthorizationState ' If this user is already authenticated, then just return the auth state. Dim state As IAuthorizationState = AuthState If (Not state Is Nothing) Then Return state End If ' Check if an authorization request already is in progress. state = arg.ProcessUserAuthorization(New HttpRequestInfo(HttpContext.Current.Request)) If (state IsNot Nothing) Then If ((String.IsNullOrEmpty(state.AccessToken) = False Or String.IsNullOrEmpty(state.RefreshToken) = False)) Then ' Store Credentials HttpContext.Current.Session("AUTH_STATE") = state _state = state Return state End If End If ' Otherwise do a new authorization request. Dim scope As String = AnalyticsService.Scopes.AnalyticsReadonly.GetStringValue() Dim _response As OutgoingWebResponse = arg.PrepareRequestUserAuthorization(New String() {scope}) ' Add Offline Access and forced Approval _response.Headers("location") += "&access_type=offline&approval_prompt=force" _response.Send() ' Will throw a ThreadAbortException to prevent sending another response. Return Nothing End Function The Cast Error Server Error in '/' Application. Unable to cast object of type 'DotNetOpenAuth.OAuth2.AuthorizationState' to type 'System.Func`2[DotNetOpenAuth.OAuth2.WebServerClient,DotNetOpenAuth.OAuth2.IAuthorizationState]'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'DotNetOpenAuth.OAuth2.AuthorizationState' to type 'System.Func`2[DotNetOpenAuth.OAuth2.WebServerClient,DotNetOpenAuth.OAuth2.IAuthorizationState]'. I've spent the better part of a day on this, and it's starting to drive me nuts. Help is much appreciated.

    Read the article

  • Java multiple class compositing and boiler plate reduction

    - by h2g2java
    We all know why Java does/should not have multiple inheritance. So this is not questioning about what has already been debated till-cows-come-home. This discusses what we would do when we wish to create a class that has the characteristics of two or more other classes. Probably, most of us would do this to "inherit" from three classes. For simplicity, I left out the constructor.: class Car extends Vehicle { final public Transport transport; final public Machine machine; } So that, Car class directly inherits methods and objects of Vehicle class, but would have to refer to transport and machine explicitly to refer to objects instantiated in Transport and Machine. Car car = new Car(); car.drive(); // from Vehicle car.transport.isAmphibious(); // from Transport car.machine.getCO2Footprint(); // from Machine I thought this was a good idea until when I encounter frameworks that require setter and getter methods. For example, the XML <Car amphibious='false' footPrint='1000' model='Fordstatic999'/> would look for the methods setAmphibious(..), setFootPrint(..) and setModel(..). Therefore, I have to project the methods from Transport and Machine classes class Car extends Vehicle { final public Transport transport; final public Machine machine; public void setAmphibious(boolean b){ this.transport.setAmphibious(b); } public void setFootPrint(String fp){ this.machine.setFootPrint(fp); } } This is OK, if there were just a few characteristics. Right now, I am trying to adapt all of SmartGWT into GWT UIBinder, especially those classes that are not a GWT widget. There are lots of characteristics to project. Wouldn't it be nice if there exists some form of annotation framework that is like this: class Car extends Vehicle @projects {Transport @projects{Machine @projects Guzzler}} { /* No need to explicitly instantiate Transport, Machine or Guzzler */ .... } Where, in case of common names of characteristics exist, the characteristics of Machine would take precedence Guzzler's, and Transport's would have precedence over Machine's, and Vehicle's would have precedence over Transport's. The annotation framework would then instantiate Transport, Machine and Guzzler as hidden members of Car and expand to break-out the protected/public characteristics, in the precedence dictated by the @project annotation sequence, into actual source code or into byte-code. Preferably into byte-code. So that the setFootPrint method is found in both Machine and Guzzler, only that of Machine's would be projected. Questions: Don't you think this is a good idea to have such a framework? Does such a framework already exist? Tell me where/what. Is there an eclipse plugin that does it? Is there a proposal or plan anywhere that you know about such an annotation framework? It would be wonderful too, if the annotation/plugin framework lets me specify that boolean, int, or whatever else needs to be converted from String and does the conversion/parsing for me too. Please advise, somebody. I hope wording of my question was clear enough. Thx. Edited: To avoid OO enthusiasts jumping to conclusion, I have renamed the title of this question.

    Read the article

  • Delphi7 - How can i copy a file that is being written to

    - by Simon
    I have an application that logs information to a daily text file every second on a master PC. A Slave PC on the network using the same application would like to copy this text file to its local drive. I can see there is going to be file access issues. These files should be no larger than 30-40MB each. the network will be 100MB ethernet. I can see there is potential for the copying process to take longer than 1 second meaning the logging PC will need to open the file for writing while it is being read. What is the best method for the file writing(logging) and file copying procedures? I know there is the standard Windows CopyFile() procedure, however this has given me file access problems. There is also TFileStream using the fmShareDenyNone flag, but this also very occasionally gives me an access problem too (like 1 per week). What is this the best way of accomplishing this task? My current File Logging: procedure FSWriteline(Filename,Header,s : String); var LogFile : TFileStream; line : String; begin if not FileExists(filename) then begin LogFile := TFileStream.Create(FileName, fmCreate or fmShareDenyNone); try LogFile.Seek(0,soFromEnd); line := Header + #13#10; LogFile.Write(line[1],Length(line)); line := s + #13#10; LogFile.Write(line[1],Length(line)); finally logfile.Free; end; end else begin line := s + #13#10; Logfile:=tfilestream.Create(Filename,fmOpenWrite or fmShareDenyNone); try logfile.Seek(0,soFromEnd); Logfile.Write(line[1], length(line)); finally Logfile.free; end; end; end; My file copy procedure: procedure DoCopy(infile, Outfile : String); begin ForceDirectories(ExtractFilePath(outfile)); //ensure folder exists if FileAge(inFile) = FileAge(OutFile) then Exit; //they are the same modified time try { Open existing destination } fo := TFileStream.Create(Outfile, fmOpenReadWrite or fmShareDenyNone); fo.Position := 0; except { otherwise Create destination } fo := TFileStream.Create(OutFile, fmCreate or fmShareDenyNone); end; try { open source } fi := TFileStream.Create(InFile, fmOpenRead or fmShareDenyNone); try cnt:= 0; fi.Position := cnt; max := fi.Size; {start copying } Repeat dod := BLOCKSIZE; // Block size if cnt+dod>max then dod := max-cnt; if dod>0 then did := fo.CopyFrom(fi, dod); cnt:=cnt+did; Percent := Round(Cnt/Max*100); until (dod=0) finally fi.free; end; finally fo.free; end; end;

    Read the article

  • How do I programmatically send email w/attachment to a known recipient using MAPI in C++? MAPISendM

    - by Tim
    This question is similar, but does not show how to add a recipient. How do I do both? We'd like the widest support possible for as many Windows platforms as possible (from XP and greater) We're using visual studio 2008 Essentially we want to send an email with: pre-filled destination address file attachment subject line from our program and give the user the ability to add any information or cancel it. EDIT I am trying to use MAPISendMail() I copied much of the code from the questions linked near the top, but I get no email dlg box and the error return I get from the call is: 0x000f - "The system cannot find the drive specified" If I comment out the lines to set the recipient, it works fine (of course then I have no recipient pre-filled in) Here is the code: #include <tchar.h> #include <windows.h> #include <mapi.h> #include <mapix.h> int _tmain( int argc, wchar_t *argv[] ) { HMODULE hMapiModule = LoadLibrary( _T( "mapi32.dll" ) ); if ( hMapiModule != NULL ) { LPMAPIINITIALIZE lpfnMAPIInitialize = NULL; LPMAPIUNINITIALIZE lpfnMAPIUninitialize = NULL; LPMAPILOGONEX lpfnMAPILogonEx = NULL; LPMAPISENDDOCUMENTS lpfnMAPISendDocuments = NULL; LPMAPISESSION lplhSession = NULL; LPMAPISENDMAIL lpfnMAPISendMail = NULL; lpfnMAPIInitialize = (LPMAPIINITIALIZE)GetProcAddress( hMapiModule, "MAPIInitialize" ); lpfnMAPIUninitialize = (LPMAPIUNINITIALIZE)GetProcAddress( hMapiModule, "MAPIUninitialize" ); lpfnMAPILogonEx = (LPMAPILOGONEX)GetProcAddress( hMapiModule, "MAPILogonEx" ); lpfnMAPISendDocuments = (LPMAPISENDDOCUMENTS)GetProcAddress( hMapiModule, "MAPISendDocuments" ); lpfnMAPISendMail = (LPMAPISENDMAIL)GetProcAddress( hMapiModule, "MAPISendMail" ); if ( lpfnMAPIInitialize && lpfnMAPIUninitialize && lpfnMAPILogonEx && lpfnMAPISendDocuments ) { HRESULT hr = (*lpfnMAPIInitialize)( NULL ); if ( SUCCEEDED( hr ) ) { hr = (*lpfnMAPILogonEx)( 0, NULL, NULL, MAPI_EXTENDED | MAPI_USE_DEFAULT, &lplhSession ); if ( SUCCEEDED( hr ) ) { // this opens the email client // create the msg. We need to add recipients AND subject AND the dmp file // file attachment MapiFileDesc filedesc; ::ZeroMemory(&filedesc, sizeof(filedesc)); filedesc.nPosition = (ULONG)-1; filedesc.lpszPathName = "E:\\Development\\Open\\testmail\\testmail.cpp"; // recipient(s) MapiRecipDesc recip; ::ZeroMemory(&recip, sizeof(recip)); recip.lpszName = "QA email"; recip.lpszAddress = "[email protected]"; // the message MapiMessage msg; ::ZeroMemory(&msg, sizeof(msg)); msg.lpszSubject = "Test"; msg.nRecipCount = 1; // if I comment out this line it works fine... msg.lpRecips = &recip; msg.nFileCount = 1; msg.lpFiles = &filedesc; hr = (*lpfnMAPISendMail)(0, NULL, &msg, MAPI_LOGON_UI|MAPI_DIALOG, 0); if ( SUCCEEDED( hr ) ) { hr = lplhSession->Logoff( 0, 0, 0 ); hr = lplhSession->Release(); lplhSession = NULL; } } } (*lpfnMAPIUninitialize)(); } FreeLibrary( hMapiModule ); } return 0; }

    Read the article

  • linux script, standard directory locations.

    - by Thingomy
    I am trying to write a bash script to do a task, I have done pretty well so far, and have it working to an extent, but I want to set it up so it's distributable to other people, and will be opening it up as open source, so I want to start doing things the "conventional" way. Unfortunately I'm not all that sure what the conventional way is. Ideally I want a link to an in depth online resource that discusses this and surrounding topics in depth, but I'm having difficulty finding keywords that will locate this on google. At the start of my script I set a bunch of global variables that store the names of the dirs that it will be accessing, this means that I can modify the dir's quickly, but this is programming shortcuts, not user shortcuts, I can't tell the users that they have to fiddle with this stuff. Also, I need for individual users' settings not to get wiped out on every upgrade. Questions: Name of settings folder: ~/.foo/ -- this is well and good, but how do I keep my working copy and my development copy separate? tweek the reference in the source of the dev version? If my program needs to maintain and update library of data (gps tracklog data in this case) where should this directory be? the user will need to access some of this data, but it's mostly for internal use. I personally work in cygwin, and I like to keep this data on separate drive, so the path is wierd, I suspect many users could find this. for a default however I'm thinking ~/gpsdata/ -- would this be normal, or should I hard code a system that ask the user at first run where to put it, and stores this in the settings folder? whatever happens I'm going ot have to store the directory reference in a file in the settings folder. The program needs a data "inbox" that is a folder that the user can dump files, then run the script to process these files. I was thinking ~/gpsdata/in/ ?? though there will always be an option to add a file or folder to the command line to use that as well (it processed files all locations listed, including the "inbox") Where should the script its self go? it's already smart enough that it can create all of it's ancillary/settings files (once I figure out the "correct" directory) if run with "./foo --setup" I could shove it in /usr/bin/ or /bin or ~/.foo/bin (and add that to the path) what's normal? I need to store login details for a web service that it will connect to (using curl -u if it matters) plan on including a setting whereby it asks for a username and password every execution, but it currently stores it plane text in a file in ~/.foo/ -- I know, this is not good. The webservice (osm.org) does support oauth, but I have no idea how to get curl to use it -- getting curl to speak to the service in the first place was a hack. Is there a simple way to do a really basic encryption on a file like this to deter idiots armed with notepad? Sorry for the list of questions, I believe they are closely related enough for a single post. This is all stuff that stabbing at, but would like clarification/confirmation over.

    Read the article

  • Windows DD-esque implementation in Qt 5

    - by user1777667
    I'm trying to get into Qt and as a project I want to try and pull a binary image from a hard drive in Windows. This is what I have: QFile dsk("//./PhysicalDrive1"); dsk.open(QIODevice::ReadOnly); QByteArray readBytes = dsk.read(512); dsk.close(); QFile img("C:/out.bin"); img.open(QIODevice::WriteOnly); img.write(readBytes); img.close(); When I run it, it creates the file, but when I view it in a hex editor, it says: ëR.NTFS ..........ø..?.ÿ.€.......€.€.ÿç......UT..............ö.......ì§á.Íá.`....ú3ÀŽÐ¼.|ûhÀ...hf.ˈ...f.>..NTFSu.´A»ªUÍ.r..ûUªu.÷Á..u.éÝ..ƒì.h..´HŠ...‹ô..Í.ŸƒÄ.žX.rá;...uÛ£..Á.....Z3Û¹. +Èfÿ.......ŽÂÿ...èK.+Èwï¸.»Í.f#Àu-f.ûTCPAu$.ù..r..h.».hp..h..fSfSfU...h¸.fa..Í.3À¿(.¹Ø.üóªé_...f`..f¡..f.....fh....fP.Sh..h..´BŠ.....‹ôÍ.fY[ZfYfY..‚..fÿ.......ŽÂÿ...u¼..faàø.è.. û.è..ôëý´.‹ð¬<.t.´.»..Í.ëòÃ..A disk read error occurred...BOOTMGR is missing...BOOTMGR is compressed...Press Ctrl+Alt+Del to restart...Œ©¾Ö..Uª Is there a better way of doing this? I tried running it as admin, but still no dice. Any help would be much appreciated. Update: I changed the code a bit. Now if I specify a dd images as the input it writes the image perfectly, but when I try to use a disk as the input it only writes 0x00. QTextStream(stdout) << "Start\n"; QFile dsk("//./d:"); //QFile dsk("//./PhysicalDrive1"); //QFile dsk("//?/Device/Harddisk1/Partition0"); //QFile dsk("//./Volume{e988ffc3-3512-11e3-99d8-806e6f6e6963}"); //QFile dsk("//./Volume{04bbc7e2-a450-11e3-a9d9-902b34d5484f}"); //QFile dsk("C:/out_2.bin"); if (!dsk.open(QIODevice::ReadOnly)) qDebug() << "Failed to open:" << dsk.errorString(); qDebug() << "Size:" << dsk.size() << "\n"; // Blank out image file QFile img(dst); img.open(QIODevice::WriteOnly); img.write(0); img.close(); // Read and write operations while (!dsk.atEnd()) { QByteArray readBytes = dsk.readLine(); qDebug() << "Reading: " << readBytes.size() << "\n"; QFile img(dst); if (!img.open(QIODevice::Append)) qDebug() << "Failed to open:" << img.errorString(); img.write(readBytes); } QTextStream(stdout) << "End\n"; I guess the real problem I'm having is how to open a volume with QFile in Windows. I tried a few variants, but to no avail.

    Read the article

  • jQuery .find() doesn't return data in IE but does in Firefox and Chrome

    - by Steve Hiner
    I helped a friend out by doing a little web work for him. Part of what he needed was an easy way to change a couple pieces of text on his site. Rather than having him edit the HTML I decided to provide an XML file with the messages in it and I used jQuery to pull them out of the file and insert them into the page. It works great... In Firefox and Chrome, not so great in IE7. I was hoping one of you could tell me why. I did a fair but of googling but couldn't find what I'm looking for. Here's the XML: <?xml version="1.0" encoding="utf-8" ?> <messages> <message type="HeaderMessage"> This message is put up in the header area. </message> <message type="FooterMessage"> This message is put in the lower left cell. </message> </messages> And here's my jQuery call: <script type="text/javascript"> $(document).ready(function() { $.get('messages.xml', function(d) { //I have confirmed that it gets to here in IE //and it has the xml loaded. //alert(d); gives me a message box with the xml text in it //alert($(d).find('message')); gives me "[object Object]" //alert($(d).find('message')[0]); gives me "undefined" //alert($(d).find('message').Length); gives me "undefined" $(d).find('message').each(function() { //But it never gets to here in IE var $msg = $(this); var type = $msg.attr("type"); var message = $msg.text(); switch (type) { case "HeaderMessage": $("#HeaderMessageDiv").html(message); break; case "FooterMessage": $("#footermessagecell").html(message); break; default: } }); }); }); </script> Is there something I need to do differently in IE? Based on the message box with [object Object] I'm assumed that .find was working in IE but since I can't index into the array with [0] or check it's Length I'm guessing that means .find isn't returning any results. Any reason why that would work perfectly in Firefox and Chrome but fail in IE? I'm a total newbie with jQuery so I hope I haven't just done something stupid. That code above was scraped out of a forum and modified to suit my needs. Since jQuery is cross-platform I figured I wouldn't have to deal with this mess. Edit: I've found that if I load the page in Visual Studio 2008 and run it then it will work in IE. So it turns out it always works when run through the development web server. Now I'm thinking IE just doesn't like doing .find in XML loaded off of my local drive so maybe when this is on an actual web server it will work OK. I have confirmed that it works fine when browsed from a web server. Must be a peculiarity with IE. I'm guessing it's because the web server sets the mime type for the xml data file transfer and without that IE doesn't parse the xml correctly.

    Read the article

  • Content Management for WebCenter Installation Guide

    - by Gary Niu
    Overvew As we known, there are two way to install Content Management for WebCenter. One way is install it by WebCenter installer wizard, another way is to install it use their own installer. This guide is for the later one. For SSO purpose, I also mentioned how to config OID identity store for Content Management for WebCenter. Content Management for WebCenter( 10.1.3.5.1) Oracle Enterprise Linux R5U4 Basic Installation -bash-3.2$ ./setup.sh Please select your locale from the list.           1. Chinese-Simplified           2. Chinese-Traditional           3. Deutsch          *4. English-US           5. English-UK           6. Español           7. Français           8. Italiano           9. Japanese          10. Korean          11. Nederlands          12. Português-Brazil Choice? Throughout the install, when entering a text value, you can press Enter to accept the default that appears between square brackets ([]). When selecting from a list, you can select the choice followed by an asterisk by pressing Enter. Select installation type from the list.         *1. Install new server          2. Update a server Choice? Content Server Installation Directory Please enter the full pathname to the installation directory. Content Server Core Folder [/oracle/ucm/server]:/opt/oracle/ucm/server Create Directory         *1. yes          2. no Choice? Java virtual machine         *1. Sun Java 1.5.0_11 JDK          2. Specify a custom Java virtual machine Choice? Installing with Java version 1.5.0_11. Enter the location of the native file repository. This directory contains the native files checked in by contributors. Content Server Native Vault Folder [/opt/oracle/ucm/server/vault/]: Create Directory         *1. yes          2. no Choice? Enter the location of the web-viewable file repository. This directory contains files that can be accessed through the web server. Content Server Weblayout Folder [/opt/oracle/ucm/server/weblayout/]: Create Directory         *1. yes          2. no Choice? This server can be configured to manage its own authentication or to allow another master to act as an authentication proxy. Configure this server as a master or proxied server.         *1. Configure as a master server.          2. Configure as server proxied by a local master server. Choice? During installation, an admin server can be installed and configured to manage this server. If there is already an admin server on this system, you can have the installer configure it to administrate this server instead. Select admin server configuration.         *1. Install an admin server to manage this server.          2. Configure an existing admin server to manage this server.          3. Don't configure an admin server. Choice? Enter the location of an executable to start your web browser. This browser will be used to display the online help. Web Browser Path [/usr/bin/firefox]: Content Server System locale           1. Chinese-Simplified           2. Chinese-Traditional           3. Deutsch          *4. English-US           5. English-UK           6. Español           7. Français           8. Italiano           9. Japanese          10. Korean          11. Nederlands          12. Português-Brazil Choice? Please select the region for your timezone from the list.         *1. Use the timezone setting for your operating system          2. Pacific          3. America          4. Atlantic          5. Europe          6. Africa          7. Asia          8. Indian          9. Australia Choice? Please enter the port number that will be used to connect to the Content Server. This port must be otherwise unused. Content Server Port [4444]: Please enter the port number that will be used to connect to the Admin Server. This port must be otherwise unused. Admin Server Port [4440]: Enter a security filter for the server port. Hosts which are allowed to communicate directly with the server port may access any resources managed by the server. Insure that hosts which need access are included in the filter. See the installation guide for more details. Incoming connection address filter [127.0.0.1]:*.*.*.* *** Content Server URL Prefix The URL prefix specified here is used when generating HTML pages that refer to the contents of the weblayout directory within the installation. This prefix must be mapped in the web server Additional Document Directories section of the Content Management administration menu to the physical location of the weblayout directory. For example, "/idc/" would be used in your installation to refer to the URL http://ucm.company.com/idc which would be mapped in the web server to the physical location /oracle/ucm/server/weblayout. Web Server Relative Root [/idc/]: Enter the name of the local mail server. The server will contact this system to deliver email. Company Mail Server [mail]: Enter the e-mail address for the system administrator. Administrator E-Mail Address [sysadmin@mail]: *** Web Server Address Many generated HTML pages refer to the web server you are using. The address specified here will be used when generating those pages. The address should include the host and domain name in most cases. If your webserver is running on a port other than 80, append a colon and the port number. Examples: www.company.com, ucm.company.com:90 Web Server HTTP Address [yekki]:yekki.cn.oracle.com:7777 Enter the name for this instance. This name should be unique across your entire enterprise. It may not contain characters other than letters, numbers, and underscores. Server Instance Name [idc]: Enter a short label for this instance. This label is used on web pages to identify this instance. It should be less than 12 characters long. Server Instance Label [idc]: Enter a long description for this instance. Server Description [Content Server idc]: Web Server         *1. Apache          2. Sun ONE          3. Configure manually Choice? Please select a database from the list below to use with the Content Server. Content Server Database         *1. Oracle          2. Microsoft SQL Server 2005          3. Microsoft SQL Server 2000          4. Sybase          5. DB2          6. Custom JDBC settings          7. Skip database configuration Choice? Manually configure JDBC settings for this database          1. yes         *2. no Choice? Oracle Server Hostname [localhost]: Oracle Listener Port Number [1521]: *** Database User ID The user name is used to log into the database used by the content server. Oracle User [user]:YEKKI_OCSERVER *** Database Password The password is used to log into the database used by the content server. Oracle Password []:oracle Oracle Instance Name [ORACLE]:orcl Configure the JVM to find the JDBC driver in a specific jar file          1. yes         *2. no Choice? The installer can attempt to create the database tables or you can manually create them. If you choose to manually create the tables, you should create them now. Attempt to create database tables          1. yes         *2. no Choice? Select components to install.          1. ContentFolios: Collect related items in folios          2. Folders_g: Organize content into hierarchical folders          3. LinkManager8: Hypertext link management support          4. OracleTextSearch: External Oracle 11g database as search indexer support          5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: 1,2,3,4,5         *1. ContentFolios: Collect related items in folios         *2. Folders_g: Organize content into hierarchical folders         *3. LinkManager8: Hypertext link management support         *4. OracleTextSearch: External Oracle 11g database as search indexer support         *5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: F Checking configuration. . . Configuration OK. Review install settings. . . Content Server Core Folder: /opt/oracle/ucm/server Java virtual machine: Sun Java 1.5.0_11 JDK Content Server Native Vault Folder: /opt/oracle/ucm/server/vault/ Content Server Weblayout Folder: /opt/oracle/ucm/server/weblayout/ Proxy authentication through another server: no Install admin server: yes Web Browser Path: /usr/bin/firefox Content Server System locale: English-US Content Server Port: 4444 Admin Server Port: 4440 Incoming connection address filter: *.*.*.* Web Server Relative Root: /idc/ Company Mail Server: mail Administrator E-Mail Address: sysadmin@mail Web Server HTTP Address: yekki.cn.oracle.com:7777 Server Instance Name: idc Server Instance Label: idc Server Description: Content Server idc Web Server: Apache Content Server Database: Oracle Manually configure JDBC settings for this database: false Oracle Server Hostname: localhost Oracle Listener Port Number: 1521 Oracle User: YEKKI_OCSERVER Oracle Password: 6GP1gBgzSyKa4JW10U8UqqPznr/lzkNn/Ojf6M8GJ8I= Oracle Instance Name: orcl Configure the JVM to find the JDBC driver in a specific jar file: false Attempt to create database tables: no Components: ContentFolios,Folders_g,LinkManager8,OracleTextSearch,ThreadedDiscussions Proceed with install         *1. Proceed          2. Change configuration          3. Recheck the configuration          4. Abort installation Choice? Finished install type Install with warnings at 4/2/10 12:32 AM. Run Scripts -bash-3.2$ ./wc_contentserverconfig.sh /opt/oracle/ucm/server /mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/CS10gR35UpdateBundle.zip' Service 'DELETE_DOC' Extended Service 'DELETE_BYREV_REVISION' Extended Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/ContentAccess/ContentAccess-linux.zip' (internal)      04.02 00:40:38.019      main    updateDocMetaDefinitionV11: adding decimal column Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/Folders_g.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/FusionLibraries.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/JpsUserProvider.zip' Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/WcConfigure.zip' Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Restart Content Server to apply updates. Configuring Apache Web Server append the following lines at httpd.conf: include "/opt/oracle/ucm/server/data/users/apache22/apache.conf" Configuring the Identity Store( Optional ) 1.  Stop Oracle Content Server and the Admin Server 2.  Update the Oracle Content Server's JPS configuration file, jps-config.xml: a. add a service instance <serviceInstance provider="idstore.ldap.provider" name="idstore.oid"> <property name="subscriber.name" value="dc=cn,dc=oracle,dc=com"></property> <property name="idstore.type" value="OID"></property> <property name="security.principal.key" value="ldap.credential"></property> <property name="security.principal.alias" value="JPS"></property> <property name="ldap.url" value="ldap://yekki.cn.oracle.com:3060"></property> <extendedProperty> <name>user.search.bases</name> <values> <value>cn=users,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <extendedProperty> <name>group.search.bases</name> <values> <value>cn=groups,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <property name="username.attr" value="uid"></property> <property name="user.login.attr" value="uid"></property> <property name="groupname.attr" value="cn"></property> </serviceInstance> b. Ensure that the <jpsContext> entry in the jps-config.xml file refers to the new serviceInstance, that is, idstore.oid and not idstore.ldap: <jpsContext name="default"> <serviceInstanceRef ref="idstore.oid"/> 3. Run the new script to setup the credentials for idstore.oid in the credential store: cd CONTENT_SERVER_HOME/custom/FusionLibraries/tools -bash-3.2$ ./run_credtool.sh Buildfile: ./../tools/credtool.xml     [input] skipping input as property action has already been set.     [input] Alias: [JPS]     [input] Key: [ldap.credential]     [input] User Name: cn=orcladmin     [input] Password: welcome1     [input] JPS Config: [/opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml] manage-creds:      [echo] @@@ Help: run 'ant manage-creds' command to see the detailed usage      [java] Using default context in /opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml file for credential store.      [java] Credential store location : /opt/oracle/ucm/server/config      [java] Credential with map JPS key ldap.credential stored successfully!      [java]      [java]      [java]     Credential for map JPS and key ldap.credential is:      [java]             PasswordCredential name : cn=orcladmin      [java]             PasswordCredential password : welcome1 BUILD SUCCESSFUL Total time: 1 minute 27 seconds Testing 1. acces http://yekki.cn.oracle.com:7777/idc 2. login in with OID user, for example: orcladmin/welcome1 3. make sure your JpsUserProvider status is "good"

    Read the article

  • Azure - Part 4 - Table Storage Service in Windows Azure

    - by Shaun
    In Windows Azure platform there are 3 storage we can use to save our data on the cloud. They are the Table, Blob and Queue. Before the Chinese New Year Microsoft announced that Azure SDK 1.1 had been released and it supports a new type of storage – Drive, which allows us to operate NTFS files on the cloud. I will cover it in the coming few posts but now I would like to talk a bit about the Table Storage.   Concept of Table Storage Service The most common development scenario is to retrieve, create, update and remove data from the data storage. In the normal way we communicate with database. When we attempt to move our application over to the cloud the most common requirement should be have a storage service. Windows Azure provides a in-build service that allow us to storage the structured data, which is called Windows Azure Table Storage Service. The data stored in the table service are like the collection of entities. And the entities are similar to rows or records in the tradtional database. An entity should had a partition key, a row key, a timestamp and set of properties. You can treat the partition key as a group name, the row key as a primary key and the timestamp as the identifer for solving the concurrency problem. Different with a table in a database, the table service does not enforce the schema for tables, which means you can have 2 entities in the same table with different property sets. The partition key is being used for the load balance of the Azure OS and the group entity transaction. As you know in the cloud you will never know which machine is hosting your application and your data. It could be moving based on the transaction weight and the number of the requests. If the Azure OS found that there are many requests connect to your Book entities with the partition key equals “Novel” it will move them to another idle machine to increase the performance. So when choosing the partition key for your entities you need to make sure they indecate the category or gourp information so that the Azure OS can perform the load balance as you wish.   Consuming the Table Although the table service looks like a database, you cannot access it through the way you are using now, neither ADO.NET nor ODBC. The table service exposed itself by ADO.NET Data Service protocol, which allows you can consume it through the RESTful style by Http requests. The Azure SDK provides a sets of classes for us to connect it. There are 2 classes we might need: TableServiceContext and TableServiceEntity. The TableServiceContext inherited from the DataServiceContext, which represents the runtime context of the ADO.NET data service. It provides 4 methods mainly used by us: CreateQuery: It will create a IQueryable instance from a given type of entity. AddObject: Add the specified entity into Table Service. UpdateObject: Update an existing entity in the Table Service. DeleteObject: Delete an entity from the Table Service. Beofre you operate the table service you need to provide the valid account information. It’s something like the connect string of the database but with your account name and the account key when you created the storage service on the Windows Azure Development Portal. After getting the CloudStorageAccount you can create the CloudTableClient instance which provides a set of methods for using the table service. A very useful method would be CreateTableIfNotExist. It will create the table container for you if it’s not exsited. And then you can operate the eneities to that table through the methods I mentioned above. Let me explain a bit more through an exmaple. We always like code rather than sentence.   Straightforward Accessing to the Table Here I would like to build a WCF service on the Windows Azure platform, and for now just one requirement: it would allow the client to create an account entity on the table service. The WCF service would have a method named Register and accept an instance of the account which the client wants to create. After perform some validation it will add the entity into the table service. So the first thing I should do is to create a Cloud Application on my VIstial Studio 2010 RC. (The Azure SDK 1.1 only supports VS2008 and VS2010 RC.) The solution should be like this below. Then I added a configuration items for the storage account through the Settings section under the cloud project. (Double click the Services file under Roles folder and navigate to the Setting section.) This setting will be used when to retrieve my storage account information. Since for now I just in the development phase I will select “UseDevelopmentStorage=true”. And then I navigated to the WebRole.cs file under my WCF project. If you have read my previous posts you would know that this file defines the process when the application start, and terminate on the cloud. What I need to do is to when the application start, set the configuration publisher to load my config file with the config name I specified. So the code would be like below. I removed the original service and contract created by the VS template and add my IAccountService contract and its implementation class - AccountService. And I add the service method Register with the parameters: email, password and it will return a boolean value to indicates the result which is very simple. At this moment if I press F5 the application will be established on my local development fabric and I can see my service runs well through the browser. Let’s implement the service method Rigister, add a new entity to the table service. As I said before the entities you want to store in the table service must have 3 properties: partition key, row key and timespan. You can create a class with these 3 properties. The Azure SDK provides us a base class for that named TableServiceEntity in Microsoft.WindowsAzure.StorageClient namespace. So what we need to do is more simply, create a class named Account and let it derived from the TableServiceEntity. And I need to add my own properties: Email, Password, DateCreated and DateDeleted. The DateDeleted is a nullable date time value to indecate whether this entity had been deleted and when. Do you notice that I missed something here? Yes it’s the partition key and row key I didn’t assigned. The TableServiceEntity base class defined 2 constructors one was a parameter-less constructor which will be used to fill values into the properties from the table service when retrieving data. The other was one with 2 parameters: partition key and row key. As I said below the partition key may affect the load balance and the row key must be unique so here I would like to use the email as the parition key and the email plus a Guid as the row key. OK now we finished the entity class we need to store onto the table service. The next step is to create a data access class for us to add it. Azure SDK gives us a base class for it named TableServiceContext as I mentioned below. So let’s create a class for operate the Account entities. The TableServiceContext need the storage account information for its constructor. It’s the combination of the storage service URI that we will create on Windows Azure platform, and the relevant account name and key. The TableServiceContext will use this information to find the related address and verify the account to operate the storage entities. Hence in my AccountDataContext class I need to override this constructor and pass the storage account into it. All entities will be saved in the table storage with one or many tables which we call them “table containers”. Before we operate an entity we need to make sure that the table container had been created on the storage. There’s a method we can use for that: CloudTableClient.CreateTableIfNotExist. So in the constructor I will perform it firstly to make sure all method will be invoked after the table had been created. Notice that I passed the storage account enpoint URI and the credentials to specify where my storage is located and who am I. Another advise is that, make your entity class name as the same as the table name when create the table. It will increase the performance when you operate it over the cloud especially querying. Since the Register WCF method will add a new account into the table service, here I will create a relevant method to add the account entity. Before implement, I should add a reference - System.Data.Services.Client to the project. This reference provides some common method within the ADO.NET Data Service which can be used in the Windows Azure Table Service. I will use its AddObject method to create my account entity. Since the table service are not fully implemented the ADO.NET Data Service, there are some methods in the System.Data.Services.Client that TableServiceContext doesn’t support, such as AddLinks, etc. Then I implemented the serivce method to add the account entity through the AccountDataContext. You can see in the service implmentation I load the storage account information through my configuration file and created the account table entity from the parameters. Then I created the AccountDataContext. If it’s my first time to invoke this method the constructor of the AccountDataContext will create a table container for me. Then I use Add method to add the account entity into the table. Next, let’s create a farely simple client application to test this service. I created a windows console application and added a service reference to my WCF service. The metadata information of the WCF service cannot be retrieved if it’s deployed on the Windows Azure even though the <serviceMetadata httpGetEnabled="true"/> had been set. If we need to get its metadata we can deploy it on the local development service and then changed the endpoint to the address which is on the cloud. In the client side app.config file I specified the endpoint to the local development fabric address. And the just implement the client to let me input an email and a password then invoke the WCF service to add my acocunt. Let’s run my application and see the result. Of course it should return TRUE to me. And in the local SQL Express I can see the data had been saved in the table.   Summary In this post I explained more about the Windows Azure Table Storage Service. I also created a small application for demostration of how to connect and consume it through the ADO.NET Data Service Managed Library provided within the Azure SDK. I only show how to create an eneity in the storage service. In the next post I would like to explain about how to query the entities with conditions thruogh LINQ. I also would like to refactor my AccountDataContext class to make it dyamic for any kinds of entities.   Hope this helps, Shaun   All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

    - by smisner
    Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system.The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me.At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach.Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements.My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work.Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way.DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal.Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info:You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client.You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features.I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically.When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions:On the Choose the installation you want page of the installation wizard, I chose Server Farm.On the Server Type page, I chose Complete.At the end of the installation, I did not run the configuration wizard.Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end.It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective.I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed:Install SQL Server 2008 R2 to get a database engine instance installed.Run the SharePoint configuration wizard to set up the SharePoint databases.In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization.Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment.I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon.Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment.I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568  | Next Page >