Search Results

Search found 16530 results on 662 pages for 'off shore'.

Page 562/662 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >

• What are good examples of perfectly acceptable approaches to development that are NOT test driven development (TDD)?

  - by markbruns

  The TDD cycle is test, code, refactor, (repeat) and then ship. TDD implies development that is driven by testing, specifically that means understanding requirements and then writing tests first before developing or writing code. My natural inclination is a philosophical bias in favor of TDD; I would like to be convinced that there are other approaches that now work well or even better than TDD so I have asked this question. What are examples of perfectly acceptable approaches that NOT test driven development? I can think of plenty approaches that are not TDD but could be a lot more trouble than what they are worth ... it's not moral judgement, it's just that they are cost more than they are worth ... the following are simply examples of things that might be ok as learning exercises, but approaches I'd find to be NOT acceptable in serious production and NOT TDD might include: Inspecting quality into your product -- Focusing efforts on developing a proficiency in testing/QA can be problematic, especially if you don't work on the requirements and development side first ... symptom of this include bug triaging where the developers have so many different bugs to deal with it, it is necessary to employ a form of triage -- each development cycle gets worse and worse, programmers work more and more hours, sleep less and less, struggle to keep going in death march until they are consumed. Superstition ... believing in things that you don't understand -- this would involve borrowing code that you believe has been proven or tested from somewhere, e.g. legacy code, a magic code starter wizard or an open source project, and you go forward hacking up a storm of modifications, sliding FaceBook Connect into your the user interface, inventing some new magic features on the fly (e.g. a mashup using the Twitter API, GoogleMaps API and maybe Zappos API), showing off your cool new "product" to a few people and then writing up a simple "specification" and list of "test cases" and turning that over to Mechanical Turk for testing.

  Read the article

• View Controller Question

  - by user341444

  First off I'm new at programming. I'm creating an app with one navigation bar controller. The app is pretty basic except for a quiz section that is comprised of 12 xibs. As the users takes the quiz a new xib is pushed onto the stack. I want to create a button that takes the user back to the home screen if they do not want to complete the quiz. The back button takes them to the previous xib which could be 11 deep. Is it possible to dismiss the modal views and reload the rootView controller? Here's the code from my delegate @synthesize window; @synthesize navigationController; (void)applicationDidFinishLaunching:(UIApplication *)application { // Override point for customization after application launch [window addSubview:[navigationController view]]; [window makeKeyAndVisible]; } (void)dealloc { [window release]; [navigationController release]; [super dealloc]; } This is how I'm pushing new xibs onto the stack (IBAction) showTesting: (id)sender { Testing *varTesting = [[[Testing alloc] initWithNibName:@"Testing" bundle:nil] autorelease]; [[self navigationController] pushViewController:varTesting animated: YES]; } Any help would be greatly appreciated. Thanks

  Read the article

• Firefox "intelligently" and silently fixes incorrect file references in CSS and Scripts at runtime.

  - by bobsoap

  Well this is a really weird issue, I really didn't find anything on this elsewhere so I thought I'd address it here. Say I have an "image.jpg" and accidentally reference it in the CSS like so: url(imag.jpg) Note the missing "e". Now for me, Firefox is so incredibly clever that it will still find the correct image, but NOT SPIT OUT A WARNING. So I assume that everything is ok. But later, when I test the page in any other browser, all of a sudden the image doesn't display (and rightly so). That's because Firefox thought it was a good idea to correct my error without telling me. This becomes more critical with scripts. Firefox will also auto-correct a typo in a reference. I just wasted a whole hour scratching my head and trying to debug an ajax function in Webkit - turns out, I just had a typo where I included the file. Why on earth does Firefox do this without telling, and where the heck can I turn this off? This has first occured somewhere around FF 3.0 and still persists in 3.6.3. /rant an thank fo any inpu ;)

  Read the article

• Doing a virus check on a file from a build script

  - by the_mandrill

  I would like to be be able to invoke a virus check as the final stage of the build process (please don't question why a dev machine would get a virus, it's just a belt-and-braces approach to avoid the risk of getting sued by customers...). Also I'd like the option of having AV on a machine but switching the auto file system protection off (at least for the build directories). What I would like is a generic way of scanning a file using whatever AV system is in place. I'm assuming that there's an Windows API to do this, given that Windows detects the presence of an AV system, and browsers such as Firefox invoke a virus scan whenever a file is downloaded. So what's the API that they're using? There's the Microsoft AntiVirus API but that seems to be specific to Office documents. Does the approach involve using WMI? (and if you can detect the AV provider from there, how do you then invoke it to scan a file?) I know that I could write the script to manually call the AV scanner that I know to be installed, but as an intellectual exercise I'm more interested to know how apps like Firefox are doing this.

  Read the article

• Is there a maximum number of input controls that can be used on an HTML form?

  - by Rich

  I have an ambitious requirement for an asp.net 2.0 web page that contains a table (gridview), and each row in the grid contains 6 select (dropdown) controls for data entry. The number of rows that will be displayed is dependent upon the user's search parameters, which are specified in another area of the page. Unfortunately, with the default (and even basic) search parameters specified, the grid could contain several hundred rows. I've noticed that the browser, in this case IE8, starts behaving rather erratically once I reach a large number of rows -- no documented evidence for the number of rows where this begins to be a problem. For example, trying to view the source of the page results in a message from IE stating that there was a problem with the page that forced the browser to reload it, and I never get the source. Obviously the page loads and renders rather slowly also. I know that my solution is probably going to involve paging the gridview such that it only displays 20 or so rows per page, and I'll have to write code to handle the saving of changes in the dropdown values when the user changes pages. I can probably turn off viewstate on the gridview also. However, the question I really want to pose is this -- has anyone seen a documented rule indicating the maximum number of input controls that an HTML browser form is supposed to be able to contain? I could not find anything on the Internet after doing a search, and I suspect the answer may be whatever the browser can handle based on the machine configuration it is running on. Any rules of thumb you use? Thanks for any suggestions. Rich

  Read the article

• UIViewController maintains state after being nilled

  - by Eric

  In my app, I made a BookViewController class that displays and animates the pages of a book and a MainMenuViewController class that displays a set of books the user can read. In the latter class, when the user taps on one of the books, a function is called that should create a completely new instance of BookViewController, but for some reason the instance maintains its state (i.e. it resumes from the page the user left off). How can this be if I set it to nil? What am I missing here? (Note that I'm using ARC). MainMenuViewController.m @interface MainMenuViewController () @property (strong) BookViewController *bookViewController; @end @implementation MainMenuViewController @synthesize bookViewController; -(void)bookTapped:(UIButton *)sender{ NSString *bookTitle; if(sender == book1button) bookTitle = @"book1"; else if(sender == book2button) bookTitle = @"book2"; bookViewController = nil; bookViewController = [[BookViewController alloc] initWithBookTitle:bookTitle]; [self presentViewController:bookViewController animated:YES completion:nil]; } BookViewController.h @interface BookViewController : UIViewController -(id)initWithBookTitle:(NSString *)bookTitle; @end BookViewController.m @implementation BookViewController -(id)initWithBookTitle:(NSString *)theBookTitle{ self = [super init]; if(self){ bookTitle = [NSString stringWithFormat:@"%@", theBookTitle]; [self setModalTransitionStyle:UIModalTransitionStyleCrossDissolve]; NSLog(@"init a BookViewController with bookTitle: %@", bookTitle); } return self; } Every time a book is tapped, bookTapped: is called, and thee console always prints: 2012-08-31 16:29:51.750 AppName[25713:c07] init a BookViewController with bookTitle: book1 So if a new instance of BookViewController is being created, how come it seems to be returning the old one?

  Read the article

• Summary statistics in visual basic

  - by ben

  Below I am trying to write a script the goal of which is to calculate some summary statistics for a few different columns of numbers. I have gotten some help on it up to the "Need help below" mark. But beyond that I am flabergasted as to how to calculate the simple stats (sum, mean, standard deviation, coefficient of variation). I know VB has scripts for these stats, which I have included in my code, but I guess I need to do some extra declaring or something. Advice much appreciated. Thanks. Sub TOAinput() Const n As Integer = 648 Dim stratum(n), hybrid(n), acres(n), hhsz(n), offinc(n) Dim s1 As Integer Dim s2 As Integer Dim i As Integer For i = 1 To n stratum(i) = Worksheets("hhid level").Cells(i + 1, 2).Value Next i s1 = 0 s2 = 0 For i = 1 To n If stratum(i) = 1 Then s1 = s1 + 1 Else: s2 = s2 + 1 End If Next i Dim acres1(), hhsz1(), offinc1(), acres2(), hhsz2(), offinc2() ReDim acres1(s1), hhsz1(s1), offinc1(s1), acres2(s2), hhsz2(s2), offinc2(s2) 'data infiles: acres, hh size, off-farm income, For i = 1 To n acres(i) = Worksheets("hhid level").Cells(i + 1, 4).Value hhsz(i) = Worksheets("hhid level").Cells(i + 1, 5).Value offinc(i) = Worksheets("hhid level").Cells(i + 1, 6).Value Next i s1 = 0 s2 = 0 For i = 1 To n If stratum(i) = 1 Then s1 = s1 + 1 acres1(s1) = acres(i) hhsz1(s1) = hhsz(i) offinc1(s1) = offinc(i) Else: s2 = s2 + 1 acres2(s2) = acres(i) hhsz2(s2) = hhsz(i) offinc2(s2) = offinc(i) End If Next i '**************************** 'Need help below '**************************** Dim sumac1, sumac2, mhhsz1, mhhsz2, cvhhsz1, cvhhsz2 sumac1 = Sum(acres1) sumac2 = Sum(acres2) mhhsz1 = Average(hhsz1) mhhsz2 = Average(hhsz2) cvhhsz1 = StDev(hhsz1) / Average(hhsz1) cvhhsz2 = StDev(hhsz2) / Average(hhsz2) End Sub

  Read the article

• Jquery find behavior in firefox 3.5.9

  - by dragoon

  Hi, i have the following piece of HTML code on my page: <tr> <td> <div> <input type="hidden" name="test" value=""> <input autocomplete="off" class="ffb-input watermark"> <div class="ffb"> <div class="content"> </div> </div> </div> </td> </tr> In JavaScript I get the <tr> element using jquery and trying to search for input like this: tr.find('div input:hidden') but nothing is returned. When I'm using find like this: tr.find('div input[type=hidden]') Everything is working fine. What is the reason for such behavor? I observe this only in FireFox 3.5.9, not in 3.6.3, Jquery 1.4.2

  Read the article

• Reporting Services Sum of Inner Group in Outer Group

  - by Spoonybard

  I have a report in Reporting Services 2008 using ASP.net 3.5 and SQL Server 2008. The report has 2 groupings and a detail row. This is the current format: Outer Group Inner Group Detail Row The Detail Row represents an item on a receipt and a receipt can have multiple items. Each receipt was paid with a certain payment method. So the Outer Group is grouped by payment type, the Inner Group is grouped by the receipt's ID, and the Detail Row is each item for the given receipt. My raw data result set has two important columns: The Amount Received and the Amount Applied. The Amount Received is how much money in total was collected for all the items on the receipt. The Amount Applied is how much money each item got from the total Amount Received. Sample Result Set: ReceiptID Item ItemID AmountReceived AmountApplied Payment Method ------------------------------------------------------------------------------------------ 1 Book 1 $200.00 $40.00 Cash 1 CD 2 $200.00 $20.00 Cash 1 Software 3 $200.00 $100.00 Cash 1 Backpack 4 $200.00 $40.00 Cash The Inner Group displays the AmountReceived correctly as $200. However, the Outer Group displays the AmountReceived as $800, because I believe that it is going off each detail row which in this case is a count of 4 items. What I want is to see in the Outer Group that the Amount Received is $200. I tried restricting the scope in my SUM function to be the Inner Group, but I get the error "The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset." Does anyone have any suggestions on how to solve this issue? Thanks.

  Read the article

• MSSQL Server using multiple ID Numbers

  - by vincer

  I have an web application that creates printable forms, these forms have a unique number on them, the problem is I have 2 forms that separate numbers need to be created for them. ie) Form1- Numbered 2000000-2999999 Form2- Numbered 3000000-3999999 dbo.test2 - is my form information table Tsel - is my autoinc table for the 3000000 series numbers Tadv - is my autoinc table for the 2000000 series numbers What I have done is create 2 tables with just autoinc row (one for 2000000 series numbers and one for 3000000 series numbers), I then created a trigger to add a record to the coresponding table, read back the autoinc number and add it to my table that stores the form information including the just created autoinc number for the right series of forms. Although it does work, I'm concerned that the numbers will get messed up under load. I'm not sure the @@IDENTITY will always return the right value when many people are using the system. (I cannot have duplicates and I need to use the numbering form show above. Thanks for any help See code below. ** TRIGGER ** CREATE TRIGGER MAKEANID2 ON dbo.test2 AFTER INSERT AS SET NOCOUNT ON declare @someid int declare @someid2 int declare @startfrom int declare @test1 varchar(10) select @someid=@@IDENTITY select @test1 = (Select name1 from test2 where sysid = @someid ) if @test1 = 'select' begin insert into Tsel Default values select @someid2 = @@IDENTITY end if @test1 = 'adv' begin insert into Tadv Default values select @someid2 = @@IDENTITY end update test2 set name2=(@someid2) where sysid = @someid SET NOCOUNT OFF

  Read the article

• Getting document.getElementsByName from another page PHP/javascript

  - by DarkN3ss

  so i have been looking around on how to do this but with no success. Im trying to get the value of the name test from an external website <input type="hidden" name="test" value="ThisIsAValue" /> But so far i have only found how to get the value of that with an ID <input type="hidden" id="test" name="test" value="ThisIsAValue" autocomplete="off" /> but I need to try find it without a ID is my problem. And this is an example on how to get it from the ID <?php $doc = new DomDocument; $doc->validateOnParse = true; $doc->loadHtml(file_get_contents('http://example.com/bla.php')); var_dump($doc->getElementById('test')); ?> And i have found how to get it from name and NOT ID on the same page <script> function getElements() { var test = document.getElementsByName("test")[0].value; alert(test); } </script> But again I dont know how to get the value of it by name from an external page eg "http://example.com/bla.php", any help? Thanks

  Read the article

• Does jquery live slow down websites?

  - by chobo2

  Hi I have a problem I am using jquery U.I tabs that load everything with ajax. Now I have it right now everytime you click on a tab a partial view is loaded up into that tab. Now in this partial view their are javascript files that use jquery to bind all the events that are needed in that tab plus some jquery plugins I am using. Now every time that tab is loaded up all those scripts are loaded up. If it is clicked 10 times then those scripts are loaded 10times up meaing now each of say my buttons will now have 10 of the same events on it mean if someone clicks on that button 10 events will all fire off to and do the same thing. So I need to find some solution to either move all the script out and have it on the main page and use jquery.live or some other solution. I tried to do use jquery caching for the U.I tabs but this won't work since some things in say Tab A when changed effect Tab B meaning I need Tab B to be reloaded but the scripts can't reload otherwise I run into the same problem as now.

  Read the article

• IDENTITY_INSERT ON inside of cursor does not allow inserted id

  - by Mac

  I am trying to set some id's for a bunch of rows in a database where the id column is an identity. I've created a cursor to loop through the rows and update the ids with incrementing negative numbers (-1,-2,-3 etc). When I updated just one row turning on the IDENTITY_INSERT it worked fine but as soon as I try and use it in a cursor, it throws the following error. Msg 8102, Level 16, State 1, Line 22 Cannot update identity column 'myRowID'. DECLARE @MinId INT; SET @MinId = (SELECT MIN(myRowId) FROM myTable)-1; DECLARE myCursor CURSOR FOR SELECT myRowId FROM dbo.myTable WHERE myRowId > 17095 OPEN myCursor DECLARE @myRowId INT FETCH NEXT FROM myCursor INTO @myRowId WHILE (@@FETCH_STATUS <> -1) BEGIN SET IDENTITY_INSERT dbo.myTable ON; --UPDATE dbo.myTable --SET myRowId = @MinId --WHERE myRowId = @myRowId; PRINT (N'ID: ' + CAST(@myRowId AS VARCHAR(10)) + N' NewID: ' + CAST(@MinId AS VARCHAR(4))); SET @MinId = @MinId - 1; FETCH NEXT FROM myCursor INTO @myRowId END CLOSE myCursor DEALLOCATE myCursor GO SET IDENTITY_INSERT dbo.myTable OFF; GO Does anyone know what I'm doing wrong?

  Read the article

• Ways to support manually executed tests? (that can be used on a Mac)

  - by Rinzwind

  Are there any tools that can be used on a Mac to support manually executed tests? I have a number of tests that I'm executing manually and which I'm currently documenting using merely a plain text file. "Tools" can be interpreted rather loosely here, anything that's a step up from the plain text file would be useful: a template for some suitable application, supporting AppleScript scripts, a web-based system, a full-blown application ... Some things that would be great to have better support for (see also the example below): Checking off each step while you're manually executing the test. Showing the next step(s) in a small window that is always kept in front of all other windows. Automatically updating the 'last tested' and 'using svn revision' info. Keeping a record of all previous testing rounds (not just the last one). ... Any suggestions for any such "tools" that can be used on a Mac? An example (faked) entry from the plain text file to give you a better idea of what I'm looking for: - Check that exported web pages render properly in Safari. Last tested: 2010-03-24 Using SVN revision: 1000 Steps: - Open a new document. - Add some items to the document. - Export the document to a web page "Test.html" in a new folder "Export Test" on the Desktop. - Open the web page in Safari, script: tell application "Finder" open file "Test.html" of folder "Export Test" of desktop end tell Expected results: - The web page should appear properly with all items shown. Clean up steps: - Remove the folder "Export Test" from the Desktop. ( Note: for those unaware, the snippet of AppleScript in the above can be executed from most text editing applications through the Services menu by selecting the snippet and using: the application menu Services Script Editor Run as AppleScript. This is quite useful to automate some steps for tests that are difficult to automate as a whole. )

  Read the article

• jQueryUI dialog width

  - by user35295

  Fiddle Full Screen Example I use jQuery dialog to open tables. Some of them have a large amount of text and they tend to be too long and go way off the screen. How can I make the dialog wider if the table is too long like the first one in the fiddle? I've tried width:'auto' but it seems to just occupy the entire screen. HTML: <button class='label'>Click</button><div class='dialog'><p><table>.....</table></div> <button class='label'>Click</button><div class='dialog'><p><table>.....</table></div> Javascript: $(document).ready(function(){ $('.label').each(function() { var dialogopen = $(this).next(".dialog"); dialogopen.dialog({width:'auto',autoOpen: false,modal: true, open: function(){ jQuery('.ui-widget-overlay').bind('click',function(){ dialogopen.dialog('close'); }) } }); $(this).click(function(){ dialogopen.dialog('open'); return false; } ); }); });

  Read the article

• Emailing a fixed document through Outlook

  - by MoominTroll

  I've added functionality to an application that prints out a bunch of information to a FixedDOcument and sends this off to the printer. This works just fine, however the request is that there be an in application function that emails the document using OUtlook and its here that I come unstuck. I'd very much like to just reuse the class that makes the fixed document for printing to generate the text for email, but I'm struggling to do this. I've tried the following... Microsoft.Office.Interop.Outlook.Application oApp = new Microsoft.Office.Interop.Outlook.Application(); MailItem email = (MailItem)(oApp.CreateItem(OlItemType.olMailItem)); email.Recipients.Add("[email protected]"); email.Subject = "Hello"; email.Body = "TEST"; FixedDocument doc = CreateReport(); //make my fixed document //this doesn't work, and the parameters it takes suggest it never will email.Attachments.Add(doc, OlAttachmentType.olByValue, 1, null); email.Send(); I can't help but think I'm on completely the wrong tack here, but I don't really want to have to write a bunch of new text formatting (since email.Body only takes a string) when I've already got the content formatted how I want it. Note that the content is all textual, so I don't really care if it gets sent as an attachment or as text in the emails body. Ideally if its sent as an attachment it won't be saved anywhere permanently. Any pointers?

  Read the article

• License For (Mostly) Open Source Website / Service

  - by Ryan Sullivan

  I have an interesting setup and am not sure how to license a website. I know this is not legal advice, and I am not asking for any. There are so many different Open Source Licenses and I do not have the time to read every last one to see which best fits my situation. Really, I am looking for suggestions and a nudge in the right direction. My setup is: I give away for free version of my web service with a clean website interface. The implementation I use in the actual web site is (almost) identical to what I give away. The main service works the exactly the same way, but the website interface to manage features in the service is fairly different. Really the web interfaces have the same exact backend, and the front ends accomplish the same tasks, but the service I offer on my site is very rich and uses a good deal of javascript, where I kept the interface in the version I give away as simple and javascript-less as possible. Mostly so it is easy to understand and integrate into other sites. I am not entirely sure how I should license this. It is more like I develop an open source service but have a separate site built upon it. I like the GPLv3 but I am not sure if I can use it in this case especially since I am making some money off of google ad's on the site and plan on using amazon affiliates as well. Any help would be greatly appreciated. I do want to open it up as much as possible. But I still want to be able to continue with my own implementation. Thanks in advance for any information or help anyone can provide.

  Read the article

• Yet another question about C++ books..

  - by suicideducky

  Intro rant Hey all, so after just over a year of browsing I decided it's time to ask a question for myself, it's sadly similar to many that have been asked before. I'm 18, am studying towards a BSc in Comp SCi and have been programming 'on and off' for about 6 years now, after wrestling with C++ for a bit then stumbling upon (and reading cover to cover) "Programming: Principles and Practice Using C++" by the great man himself I feel pretty comfortable with C++, I am almost finished writing my first open source program in C++ (a mediawiki parser, http://code.google.com/p/apertium-mediawiki/). I have decided I want to really get to know the power of C++, get familiar with some of its 'darker' corners and also delve into game programming, at this point I am rather keen on the book "Essential 3D Game Programming: with C++ and OpenGL" (released 24 may '10), I would also like to get 1 or 2 other books on 'general C++' that I can read cover to cover during my spare time. At this point I am pretty open to suggestions I would like something in the intermediate/advanced zone, some books I am rather keen on include: The C++ Standard Library: A tutorial and reference, C++ Template, the complete guide, and Modern C++ Design: Generic Programming and Design Patterns Applied Thanks in advance.

  Read the article

• Multi-user job/task tracking/queue software

  - by Bmsgaffer86

  Background: I test and repair electronic products with a team. There are many 'jobs' going through my lab at any point in time. It is getting difficult to track whats coming in and going out because I don't do every test or repair myself. Target: User can enter a job when they drop it off in my lab, and it will appear on the master list or queue. Needs to have priorities and due dates that can be adjusted by users. Ideally this would be web based and open-source, but I am flexible. Dream: A large monitor displaying a list of jobs in the master queue with details. This is very optional though, and would be in the best case scenario. I have done MANY hours of Google-ing and I am not sure if I have been using the right terminology, but I have not found anything that is simple enough to stand alone yet complex enough to be multi-user based. I am mildly proficient in VB, and have the drive to piece anything together that I have to. I am open to ANY help or suggestions.

  Read the article

• ReplaceAll not working as expected

  - by Tim Kemp

  Still early days with Mathematica so please forgive what is probably a very obvious question. I am trying to generate some parametric plots. I have: ParametricPlot[{ (a + b) Cos[t] - h Cos[(a + b)/b t], (a + b) Sin[t] - h Sin[(a + b)/b t]}, {t, 0, 2 \[Pi]}, PlotRange -> All] /. {a -> 2, b -> 1, h -> 1} No joy: the replacement rules are not applied and a, b and h remain undefined. If I instead do: Hold@ParametricPlot[{ (a + b) Cos[t] - h Cos[(a + b)/b t], (a + b) Sin[t] - h Sin[(a + b)/b t]}, {t, 0, 2 \[Pi]}, PlotRange -> All] /. {a -> 2, b -> 1, h -> 1} it looks like the rules ARE working, as confirmed by the output: Hold[ParametricPlot[{(2 + 1) Cos[t] - 1 Cos[(2 + 1) t], (2 + 1) Sin[t] - 1 Sin[(2 + 1) t]}, {t, 0, 2 \[Pi]}, PlotRange -> All]] Which is what I'd expect. Take the Hold off, though, and the ParametricPlot doesn't work. There's nothing wrong with the equations or the ParametricPlot itself, though, because I tried setting values for a, b and h in a separate expression (a=2; b=1; h=1) and I get my pretty double cardoid out as expected. So, what am I doing wrong with ReplaceAll and why are the transformation rules not working? This is another fundamentally important aspect of MMA that my OOP-ruined brain isn't understanding. I tried reading up on ReplaceAll and ParametricPlot and the closest clue I found was that "ParametricPlot has attribute HoldAll and evaluates f only after assigning specific numerical values to variables" which didn't help much or I wouldn't be here. Thanks.

  Read the article

• MySQL Query Where Column Like Column

  - by shmeeps

  I'm working on a small project that involves grabbing a list of contacts which are stored for each group. Essentially, the database is set up so that each group has a primary and secondary contact stored as, unsurprisingly, Group.Primary and Group.Secondary. The objective is to pull every Primary and Secondary contact for each Group and display them in a sortable table. I have the sortable table all worked out, but I have come across a small problem. Each primary and secondary field can have more than one contact separated by a comma. For instance, if Primary contained 123,256 , it would need to pull both Contacts with IDs 123 and 256. I had intended to use a query formatted like this: SELECT * FROM Group G, Contacts C WHERE G.Primary LIKE %C.ID% OR G.Secondary LIKE %C.ID% so that I could just skip the comma part, but I can't seem to find a working query for this. My question to you is, am I just overlooking something here? Is there a simple query that would let me do this? Or am I better off getting the groups and contacts separately, and combine the two later. I think the former is a little easier to understand when read, which is a plus as this is a shared project, but if that is not possible I will do the latter. This code is simplified, but it gets the point across.

  Read the article

• Actionscript flex sockets and telnet

  - by MAC

  I am trying to make a flex application where it gets data from a telnet connection and I am running into a weird problem. To give a brief introduction, i want to read data from a process that exposes it through a socket. So if in the shell i type telnet localhost 8651i receive the xml and then the connection is closed (I get the following Connection closed by foreign host.) Anyway i found a simple tutorial online for flex that essentially is a telnet client and one would expect it to work but everything follows Murphy's laws and nothing ever works! Now i have messages being printed in every event handler and all places that i can think off. When i connect to the socket nothing happens, no event handler is triggered even the connect or close handler and if i do the following the socket.connected returns false! I get no errors, try catch raises no exception. I am at a loss as to whats going wrong? socket.connect(serverURL, portNumber); msg(socket.connected.toString()); Is there something about telnet that i do not know and its causing this to not work. Whats more interesting is why none of the events get fired. Another interesting thing is that i have some python code that does the same thing and its able to get the xml back! The following is the python code that works! def getStats(host, port): sock = socket.socket() sock.connect((host, port)) res = sock.recv(1024*1024*1024, socket.MSG_WAITALL) sock.close() return statFunc(res) So i ask you whats going wrong!!!!!! Is there some inherent problem with how flex handles sockets?

  Read the article

• How to use a divider in a navigation with list elements?

  - by Kris

  I want to create a navigation which got divider between each list element. Here is a simple HTML/CSS Code/Template : <nav> <ul> <li><a href="#">A</a></li> <li><a href="#">B</a></li> <li><a href="#">C</a></li> <li><a href="#">D</a></li> <li><a href="#">E</a></li> </ul> </nav> nav ul { list-style:none; float:right; } nav ul li { float:left; padding-left:10px; } nav ul li a { color:#111; font-family:Verdana; font-size:15px; text-decoration:none; } nav ul li a:hover { color:#9F3039; } so just a simple looking navigation which floats from the right side on a logo which is not displayed in the code here. Now I want to at devider between each link - I know I could do it with border-right and just use another class on my last listelement which set the border-right off, BUT I want to use a special kind of divider - an image. How can I do it best ?

  Read the article

• getting BR-separated text via DOM in JS/JQuery?

  - by Hellion

  Hi all, I am writing a greasemonkey script that is parsing a page with the following general structure: <table> <tr><td><center> <b><a href="show.php?who=IDNumber">(Account Name)</a></b> (#IDNumber) <br> (Rank) <br> (Title) <p> <b>Statistics:</b> <br> <table> <tr><td>blah blah etc. </td></tr></table></center></table> I'm specifically trying to grab the (Title) part out of that. As you can see, however, it's set off only by a <BR> tag, has no ID of its own, is just part of the text of a <CENTER> tag, and that tag has a whole raft of other text associated with it. Right now what I'm doing to get that is taking the innerHTML of the Center tag and using a regex on it to match for /<br>([A-Za-z ]*)<p><b>Statistics/. That is working okay for me, but it feels like there's gotta be a better way to pick that particular text out of there. ... So, is there a better way? Or should I complain to the site programmer that he needs to make that text more accessible? :-)

  Read the article

• Alternative to Altova's MissionKit

  - by nomad311

  Anyone know of any good alternatives (other than those listed below which really are only good at specific XML development tasks)? The Why (if you're interested): I've been doing XML development on and off for years now, but someone brought XMLSpy to my attention recently, and it is awesome - the price isn't. Lately I've been using a combination of: Notepad++ (modifying XML) EditX (validating/debugging XML) Eclipse (designing schemas) and MS Visual Studio (validating schemas) ...based on which makes the task(s) easiest. But, I've just found out that we will be using XSL transformations to generate XML in the future. I've never used mission kit before, but I'm just short of positive XMLSpy replaces all the above mentioned tool for XML development. And if their XSL tools are anywhere near the caliber of XMLSpy ...simply put I need it. I don't believe that I can convince the budgeting types to buy licenses for MissionKit at $1000 each (won't stop me from trying). In the mean while some research on alternatives won't hurt, but a few Google queries has only revealed that not many people pay for Altova's (overpriced?) software as there are mostly links to P2P sites for downloading a more free-like version of MissionKit.

  Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >