Search Results

Search found 15423 results on 617 pages for 'uses clause'.

Page 562/617 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >

  • Java map / nio / NFS issue causing a VM fault: "a fault occurred in a recent unsafe memory access op

    - by Matthew Bloch
    I have written a parser class for a particular binary format (nfdump if anyone is interested) which uses java.nio's MappedByteBuffer to read through files of a few GB each. The binary format is just a series of headers and mostly fixed-size binary records, which are fed out to the called by calling nextRecord(), which pushes on the state machine, returning null when it's done. It performs well. It works on a development machine. On my production host, it can run for a few minutes or hours, but always seems to throw "java.lang.InternalError: a fault occurred in a recent unsafe memory access operation in compiled Java code", fingering one of the Map.getInt, getShort methods, i.e. a read operation in the map. The uncontroversial (?) code that sets up the map is this: /** Set up the map from the given filename and position */ protected void open() throws IOException { // Set up buffer, is this all the flexibility we'll need? channel = new FileInputStream(file).getChannel(); MappedByteBuffer map1 = channel.map(FileChannel.MapMode.READ_ONLY, 0, channel.size()); map1.load(); // we want the whole thing, plus seems to reduce frequency of crashes? map = map1; // assumes the host writing the files is little-endian (x86), ought to be configurable map.order(java.nio.ByteOrder.LITTLE_ENDIAN); map.position(position); } and then I use the various map.get* methods to read shorts, ints, longs and other sequences of bytes, before hitting the end of the file and closing the map. I've never seen the exception thrown on my development host. But the significant point of difference between my production host and development is that on the former, I am reading sequences of these files over NFS (probably 6-8TB eventually, still growing). On my dev machine, I have a smaller selection of these files locally (60GB), but when it blows up on the production host it's usually well before it gets to 60GB of data. Both machines are running java 1.6.0_20-b02, though the production host is running Debian/lenny, the dev host is Ubuntu/karmic. I'm not convinced that will make any difference. Both machines have 16GB RAM, and are running with the same java heap settings. I take the view that if there is a bug in my code, there is enough of a bug in the JVM not to throw me a proper exception! But I think it is just a particular JVM implementation bug due to interactions between NFS and mmap, possibly a recurrence of 6244515 which is officially fixed. I already tried adding in a "load" call to force the MappedByteBuffer to load its contents into RAM - this seemed to delay the error in the one test run I've done, but not prevent it. Or it could be coincidence that was the longest it had gone before crashing! If you've read this far and have done this kind of thing with java.nio before, what would your instinct be? Right now mine is to rewrite it without nio :)

    Read the article

  • jQuery multiple running totals

    - by Benjamin Randal
    0I am using jQuery to calculate a running total on multiple textboxes. Just found an awesome response on how to get that working a few days ago, but now I am running into another problem. When using one selector, the total for GetTotal is calculated perfectly. However, when I include the second selector, the totals begin to conflict with one another, and no longer calculate properly. I have been searching for a solution to this for some time now, does anyone have any ideas? Here is the selector i am currently using: function GetTotal(txtBox) { var total = 0; $('input:text').each(function(index, value) { total += parseInt($(value).val() || 0); }); $("#chkTotal").html(total); } My view uses these txt boxes <div class="editor-field"> @Html.TextBox("Field1", String.Empty, new {InputType = "text", id = "field1", onchange = "GetTotal(this)" }) </div> <div class="editor-field"> @Html.TextBox("Field2", String.Empty, new {InputType = "text", id = "field2", onchange = "GetTotal(this)" }) </div> <div> <h3>Total Checked</h3> </div> <div id="chkTotal"></div> Now I am trying to implement another selector which will total two additional editor fields... function GetTotal1(txtBox) { var total1 = 0; $('input:text').each(function (index, value) { total1 += parseInt($(value).val() || 0); }); $("#disTotal").html(total1); } View: <div class="editor-field"> @Html.TextBox("Field3", String.Empty, new {InputType = "text", id = "field3", onchange = "GetTotal1(this)" }) </div> <div class="editor-field"> @Html.TextBox("Field4", String.Empty, new {InputType = "text", id = "field4", onchange = "GetTotal1(this)" }) </div> <div> <h3>Total Distributed</h3> </div> <div id="disTotal"></div>

    Read the article

  • Web-Frameworks for Education Management Systems?

    - by Indebi
    So, I'm working on an idea and I'll go into a brief overview of that but my question is, What are some good web frameworks for this situation? I have some experience in the following languages: C# Python I have considerably more experience in C# than Python, however I am expecting to learn new things. My idea is this, a completely web-based community-oriented Education Management System that focuses on making students and teachers day-to-day lives easier. For students it will provide a centralized place for them to do homework, study for tests, and reinforce concepts learned previously in class. For teachers it will give them a centralized place to handle assignments, attendance, homework, tests, and all other major parts of classroom management. All of that, but in a community-oriented fashion. Everything a teacher does is shared and open to constructive criticism, allowing other teachers to use their assignments/tests and for students or other teachers to comment, rate and criticize their assignments. This encourages an environment of openness that will allow teacher's to focus on teaching and student's to focus on learning. And that community wouldn't be limited to one school or school-district, this system would be completely school-independent. Please note that I have no problem with hearing constructive criticism on this idea, however I would prefer if this post was more focused on my question. I have somewhat explored about the following options: Django ASP.NET Ruby on Rails Silverlight (1) I have Django installed and I played with it for a little bit, I really like how easy setting up databases are and how it handles the database completely for you. I don't really know how to use it very well and I don't quite understand the Model-View-Controller paradigm(?) for it yet but I haven't thought about it much. I also like the fact that it uses Python. (2) I don't really like Visual Studio for developing in ASP.NET, I hate the way the web-designer works and it just feels clunky and old. I like the server-side development part though. I don't like how expensive ASP.NET and overall Visual Studio is, even if I do get it for free for now using DreamSpark (3) I haven't been able to explore much with this, I could not get Rails (or maybe Ruby) properly installed. I first installed it within RadRails and that didn't work so I uninstalled RadRails and then installed the latest version of Ruby off the official Windows Installer and then installed Ruby on Rails through gem and even after all that it still didn't work, so I installed Netbeans and attempted to use it there but it still did not work (4) I like Silverlight in some extents, I've played with this one the most, it's very similar to WPF (which I've used the most) in a lot of ways but I don't like how database connectivity works, at least in comparison to Django. I also dislike how expensive everything with Microsoft is, even if I get it for free for now with DreamSpark. I would like to hear some suggestions from experienced web-developers as to what I should use and why, or at least what some good options are for my scenario Your help would be very appreciated

    Read the article

  • jqtransform and collapsed DIV

    - by Marco
    Hello, I am using a jQuery plugin called: jqtransform This plugin uses JavaScript to apply CSS styles to form elements. The problem that I have consists in the following scenario: I’m building a search page, with a advanced search option. When the page loads, the div called “advancedSearch” is hidden, and it will only show if the user clicks a element. Inside the div#advancedSearch I have several form elements. However, if I hide the div#advancedSearch with the CSS style: “diplay:none;”, the jqtransform plugin doesn’t work correctly with the elements that are hidden. So my solution was to hide the div#advancedsearch with JavaScript. This actually works, and it does not matter if it’s done after the document is ready or not. But… with the JavaScript solution, the div#advancedSearch stays visible for a couple of milliseconds… which is visually annoying. So I was wondering if the solution to this problem would be in the CSS, or in correcting the jqtransform plugin, or even in finding a way to immediately hide the div#advancedSearch with JS making it immediately hidden. UPDATE 1 After jeerose comment I decided to place here my function (please note that the <%= % are ASP.Net tags, that I use to get the images path) $('.toggleAdvancedSearch').click(function() { $('#advancedSearchWrap').slideToggle(250); $('form.jqtransform').jqTransform({ imgPath: '<%= ResolveClientUrl("~/masterpages/img/jqtransform/") %>' }); return false; }); UPDATE 2 To test the problem, I did the following: Added another element to the page, with the ID “applyStyle”, and onClick I call the $('form').jqTransform(); Disabled the the $('form').jqTransform(); from the load of the page. If I press the a#applyStyle, before expanding the div#advancedSearch I get the same problem that I had. But if I expand the the div#advancedSearch and press the the a#applyStyle after, the problem is solved. However, if I run the page with the $('form').jqTransform(); function on the load, I cannot reapply it after with the pressing of the a#applyStyle. I think that the solution could be: disabling the all the elements that are inside the div#advancedSearch, and on the same function that expands the div, make It also apply the styles to the elements that are inside the div#advancedSearch. However, I don’t know how to do this (nether if this will work). PS: This seems to be a known issue with the plugin, but I cannot wait indefinitely for a solution.

    Read the article

  • Rails Google Maps integration Javascript problem

    - by JZ
    I'm working on Rails 3.0.0.beta2, following Advanced Rails Recipes "Recipe #32, Mark locations on a Google Map" and I hit a road block: I do not see a google map. My @adds view uses @adds.to_json to connect the google maps api with my model. My database contains "latitude" "longitude", as floating points. And the entire project can be accessed at github. Can you see where I'm not connecting the to_json output with the javascript correctly? Can you see other glairing errors in my javascript? Thanks in advance! My application.js file: function initialize() { if (GBrowserIsCompatible() && typeof adds != 'undefined') { var map = new GMap2(document.getElementById("map")); map.setCenter(new GLatLng(37.4419, -122.1419), 13); map.addControl(new GLargeMapControl()); function createMarker(latlng, add) { var marker = new GMarker(latlng); var html="<strong>"+add.first_name+"</strong><br />"+add.address; GEvent.addListener(marker,"click", function() { map.openInfoWindowHtml(latlng, html); }); return marker; } var bounds = new GLatLngBounds; for (var i = 0; i < adds.length; i++) { var latlng=new GLatLng(adds[i].latitude,adds[i].longitude) bounds.extend(latlng); map.addOverlay(createMarker(latlng, adds[i])); } map.setCenter(bounds.getCenter(),map.getBoundsZoomLevel(bounds)); } } window.onload=initialize; window.onunload=GUnload; Layouts/adds.html.erb: <script src="http://maps.google.com/maps?file=api&amp;v=2&amp;sensor=true_or_false&amp;key=ABQIAAAAeH4ThRuftWNHlwYdvcK1QBTJQa0g3IQ9GZqIMmInSLzwtGDKaBQvZChl_y5OHf0juslJRNx7TbxK3Q" type="text/javascript"></script> <% if @adds -%> <script type="text/javascript"> var maps = <%= @adds.to_json %>; </script> <% end -%>

    Read the article

  • Finding the closest object in proxmity to the mouse Coordinates

    - by Cam
    Hey there, i've been working on a problem for a while now, which involves targeting the closest movieClip in relation to the x y coords of the mouse, I've attached a nice little acompanying graphic. Each mc added to the stage has it's own sub-class (HotSpots) which uses Pythag to measure distance from mouse. At this stage i can determine the closest value from my Main class but can't figure out how to reference it back to the movieclip... hope this makes sense. Below are the two Classes. My Main Class which attachs the mcs, and monitors mouse movement and traces closest value package { import flash.display.*; import flash.text.*; import flash.events.*; public class Main extends MovieClip { var pos:Number = 50; var nodeArray:Array; public function Main(){ nodeArray = []; for(var i:int = 0; i < 4; i++) { var hotSpot_mc:HotSpots = new HotSpots; hotSpot_mc.x += pos; hotSpot_mc.y += pos; addChild(hotSpot_mc); nodeArray.push(hotSpot_mc); // set some pos pos += 70; } stage.addEventListener(MouseEvent.MOUSE_MOVE,updateProxmity) } public function updateProxmity(e:MouseEvent):void { var tempArray:Array = new Array(); for(var i:int = 0; i < 4; i++) { this['tf'+[i]].text = String(nodeArray[i].dist); tempArray.push(nodeArray[i].dist); } tempArray.sort(Array.NUMERIC); var minValue:int = tempArray[0]; trace(minValue) } } } My HotSpots Class package { import flash.display.MovieClip; import flash.events.Event; import flash.text.TextField; public class HotSpots extends MovieClip { public var XSide:Number; public var YSide:Number; public var dist:Number = 0; public function HotSpots() { addEventListener(Event.ENTER_FRAME, textUp); } public function textUp(event:Event):void { XSide = this.x - MovieClip(root).mouseX; YSide = this.y - MovieClip(root).mouseY; dist = Math.round((Math.sqrt(XSide*XSide + YSide*YSide))); } } } thanks in advance

    Read the article

  • Rails / ActiveRecord Modeling Help

    - by JM
    I’m trying to model a relationship in ActiveRecord and I think it’s a little beyond my skill level. Here’s the background. This is a horse racing project and I’m trying to model a horses Connections over time. Connections are defined as the Horse’s Current: Owner, Trainer and Jockey. Over time, a horse’s connections can change for a lot of different reasons: The owner sells the horse in a private sale The horse is claimed (purchase in a public sale) The Trainer switches jockeys The owner switches trainers In my first attempt at modeling this, I created the following tables: Horses, Owners, Trainers, Jockeys and Connections. Essentially, the Connections table was the has-many-through join table and was structured as follows: Connections Table 1 Id Horse_id Owner_id Trainer_id Jockey_id Status_Code Status_Date Change_Code The Horse, Owner, Trainer and Jockey foreign keys are self explanatory. The status code is 1 or 0 (1 active, 0 inactive) and the status date is the date the status changed. Change_code is and integer or string value that represent the reason for the change (private sale, claim, jockey change, etc) The key benefit of this approach is that the Connection is represented as one record in the connections table. The downside is that I have to have a table for Owner (1), Trainer (2) and Jockey (3) when one table could due. In my second attempt at modeling this I created the following tables: Horses, Connections, Entities The Entities tables has the following structure Entities Table id First_name Last_name Role where Role represents if the entity is a Owner, Trainer or Jockey. Under this approach, my Connections table has the following structure Connections Table 2 id Horse_id Entity_id Role Status_Code Status_Date Change_Code 1 1 1 1 1 1/1/2010 2 1 4 2 1 1/1/2010 3 1 10 3 1 1/1/2010 This approach has the benefit of eliminating two tables, but on the other hand the Connection is now comprised of three different records as opposed to one in the first approach. What believe I’m looking for is an approach that allows me to capture the Connection in one record, but also uses an Entities table with roles instead of the Owner, Trainer and Jockey tables. I’m new to ActiveRecord and rails so any and all input would be greatly appreciated. Perhaps there are other ways that would even be better. Thanks!

    Read the article

  • Profile memory-performance for part of an rails project

    - by Florian Pilz
    I want to test the profile usage of an important library-class of my rails-project. It uses ActiveRecord so I need all rails dependencies to profile it. As far as I know, I need a patched ruby (rubygc) so script/profile and script/benchmark can track memory usage. I tried to follow this official guide to patch the source code of ruby 1.8.6 (p399) and 1.8.7 (p248), but both fail with the following message: patching file gc.c Hunk #2 succeeded at 50 with fuzz 2 (offset 2 lines). Hunk #3 succeeded at 87 with fuzz 2 (offset 6 lines). Hunk #4 succeeded at 153 with fuzz 1 (offset 45 lines). Hunk #5 succeeded at 409 with fuzz 2 (offset 274 lines). Hunk #6 FAILED at 462. Hunk #7 FAILED at 506. Hunk #8 FAILED at 520. Hunk #9 FAILED at 745. Hunk #10 FAILED at 754. Hunk #11 FAILED at 923. Hunk #12 succeeded at 711 (offset 46 lines). Hunk #13 succeeded at 730 (offset 46 lines). Hunk #14 succeeded at 766 (offset 55 lines). Hunk #15 succeeded at 1428 (offset 87 lines). Hunk #16 succeeded at 1492 (offset 89 lines). Hunk #17 FAILED at 1541. Hunk #18 FAILED at 1551. Hunk #19 succeeded at 1571 (offset 91 lines). Hunk #20 succeeded at 1592 (offset 91 lines). Hunk #21 succeeded at 1601 (offset 91 lines). Hunk #22 succeeded at 1826 (offset 108 lines). Hunk #23 succeeded at 1843 (offset 108 lines). Hunk #24 succeeded at 1926 (offset 108 lines). Hunk #25 succeeded at 2118 (offset 108 lines). Hunk #26 succeeded at 2563 (offset 100 lines). Hunk #27 succeeded at 2611 with fuzz 1 (offset 102 lines). Hunk #28 succeeded at 2628 (offset 102 lines). 8 out of 28 hunks FAILED -- saving rejects to file gc.c.rej patching file intern.h Hunk #1 succeeded at 268 (offset 15 lines). I also tried to use ruby-prof, but I always get the error "uninitialized constant RubyProf::Test". I don't know how to use the gem "memory" and neither "memprof" nor "bleak_house" could be installed successfully. If I get a patched ruby running, I should be fine. But any other possibility to profile the memory of library classes are welcome. Thanks for helping!

    Read the article

  • Menu Control in Master Page fails to use CSS styles

    - by Shaun
    I'm working on a web application that uses ASP.NET 3.5 and C#. Structurally, I have a master page with a menu control on it. The control serves as my navigation, and it gets its items from a SiteMapDataSource control and a corresponding Web.sitemap file. The problem is that some styles do not render properly when you specify the CssClass property. More specifically, the selected and hover styles don't respond to css styles. Consider the code below: <%@ Master Language="C#" AutoEventWireup="true" CodeFile="Site.master.cs" Inherits="Site" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.or/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>A webpage</title> </head> <body> <form id="form1" runat="server"> <div id="page"> <asp:Menu ID="navMenu" Orientation="Horizontal" StaticMenuStyle-CssClass="staticMenu" StaticMenuItemStyle-CssClass="staticMenuItem" StaticSelectedStyle-CssClass="staticSelectedItem" StaticHoverStyle-CssClass="staticHoverItem" runat="server"> </asp:Menu> <asp:SiteMapDataSource ID="srcSiteMap" runat="server" ShowStartingNode="false" /> <br /> <asp:ContentPlaceHolder id="ContentPlaceHolder1" runat="server"> </asp:ContentPlaceHolder> </div> </form> </body> </html> Suppose I had a corresponding .css file with the following: .staticMenuItem { background-color:Red; } .staticSelectedItem { background-color:Green; } .staticHoverItem { background-color:Blue; } What will happen is that my item backgrounds will properly be red, but my selected item will not be green and the item I'm hovering my mouse over will not be blue. This seems true regardless of whether or not I include the style in the head of the master page or in an external file in default theme as specified in the web.config file. If I specify the styles in the asp.net xml like so: <asp:Menu ID="navMenu" Orientation="Horizontal" runat="server"> <StaticSelectedStyle BackColor="Green" Font-Underline="True" Font-Bold="True" /> <StaticHoverStyle BackColor="Gray" /> </asp:Menu> It appears to work properly in Firefox, but the style is never embedded in the html in Internet Explorer. Odd. Does anybody have any insight into what is causing this problem and how to neatly work around it? I'm aware I might be able to programmically determine the current page and select the corresponding menu item manually so it receives the proper style class, but before I resort to hacking C# and Javascript together to fix this functionality, I'm open to ideas.

    Read the article

  • How do you make a Custom Data Generator for SQL XML DataType.

    - by Keith Sirmons
    Howdy, I am using Visual Studio 2010 and am playing around with the Database Projects. I am creating a DataGenerationPlan to insert data into a simple table, in which one of the column datatypes is XML. Out of the box, the generation plan uses the Regular Expression generator and generates something like this : HGcSv9wa7yM44T9x5oFT4pmBkEmv62lJ7OyAmCnL6yqXC2X.......... I am looking at creating a custom data Generator for this data type and have followed this site for the basics: http://msdn.microsoft.com/en-us/library/aa833244.aspx This example works if I am creating a string datatype and using it for a nvarchar datatype. What do I need to change to hook this Generator to the XML Datatype? Below are my code files. The string property works for nvarchar. The XElement property does not work for the xml datatype, and the RecordXMLDataGenerator is not listed as an option in the Generator column for the generation plan. CustomDataGenerators: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.Data.Schema.Tools.DataGenerator; using Microsoft.Data.Schema.Extensibility; using Microsoft.Data.Schema; using Microsoft.Data.Schema.Sql; using System.Xml.Linq; namespace CustomDataGenerators { [DatabaseSchemaProviderCompatibility(typeof(SqlDatabaseSchemaProvider))] public class RecordXMLDataGenerator : Generator { private XElement _RecordData; [Output(Description = "Generates string of XML Data for the Record.", Name = "RecordDataString")] public string RecordDataString { get { return _RecordData.ToString(SaveOptions.None); } } [Output(Description = "Generates XML Data for the Record.", Name = "RecordData")] public XElement RecordData { get { return _RecordData; } } protected override void OnGenerateNextValues() { base.OnGenerateNextValues(); XElement element = new XElement("Root", new XElement("Children1", 1), new XElement("Children6", 6) ); _RecordData = element; } } } XML Extensions File: <?xml version="1.0" encoding="utf-8" ?> <extensions assembly="" version="1" xmlns="urn:Microsoft.Data.Schema.Extensions" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:Microsoft.Data.Schema.Extensions Microsoft.Data.Schema.Extensions.xsd"> <extension type="CustomDataGenerators.RecordXMLDataGenerator" assembly="CustomDataGenerators, Version=1.0.0.0, Culture=neutral, PublicKeyToken=xxxxxxxxxxxx" enabled="true"/> </extensions> Table.sql: CREATE TABLE [dbo].[Record] ( id int IDENTITY (1,1) NOT NULL, recordData xml NULL, userId int NULL, test nvarchar(max) NULL, rowver rowversion NULL, CONSTRAINT pk_RecordID PRIMARY KEY (id) )

    Read the article

  • Accessing different connection strings at runtime in ASP.NET MVC 1

    - by Neil T.
    I'm trying to implement integration testing in my ASP.NET MVC 1.0 solution. The technologies in use are LINQ-to-SQL, NUnit and WatiN. I recently discovered a pattern that will allow me to create a testing version of the database on the fly without modifying the development version of the database. I needed this behavior in order to run my user interface tests in WatiN that may modify the database. The plan is to modify the connection string in the Web.config file, and pass that new connection string to the DataContext constructor. This way, I don't have to add routes or modify my URLs in order to perform the integration testing. I've set up the project so that the test setup can modify the connection string to point to the test database when the tests are running. The connection string is stored in web.config. The problem I'm having is that when I try to run the tests, I get a NullReferenceException when trying to access the HTTPContext. From everything that I have read so far, the HTTPContext is only available within the context of a controller. Here is the code for the property that is supposed to give me the reference to the Web.config file: private System.Configuration.Configuration WebConfig { get { ExeConfigurationFileMap fileMap = new ExeConfigurationFileMap(); // NullReferenceException occurs on this line. fileMap.ExeConfigFilename = HttpContext.Current.Server.MapPath("~\\web.config"); System.Configuration.Configuration config = ConfigurationManager.OpenMappedExeConfiguration(fileMap, ConfigurationUserLevel.None); return config; } } Is there something that I am missing in order to make this work? Is there a better way to accomplish what I'm trying to achieve? UPDATE: I decided to abandon the modification of Web.config in lieu of a "request-scoped DataContext" pattern that I found here. From the looks of it, I believe it should give me the results I'm looking for. However, during the TextFixtureSetUp, I try to create a new copy of the database for testing purposes, and it fails silently. When I get to the tests, the repository still uses the production database connection string to load data.

    Read the article

  • How to group items by date range in XSLT?

    - by glenatron
    I have a bunch of data that looks a little like this: <item> <colour>Red</colour> <date_created>2009-10-10 12:01:55</date_created> <date_sold>2009-10-20 22:32:12</date_sold> </item> <item> <colour>Blue</colour> <date_created>2009-11-01 13:21:00</date_created> <date_sold>2009-11-21 12:32:12</date_sold> </item> <item> <colour>Blue</colour> <date_created>2009-10-29 21:23:02</date_created> <date_sold>2009-10-20 02:02:22</date_sold> </item> <item> <colour>Red</colour> <date_created>2009-11-02 09:11:51</date_created> <date_sold>2009-11-20 09:15:53</date_sold> </item> <item> <colour>Red</colour> <date_created>2009-10-18 11:00:55</date_created> <date_sold>2009-10-20 11:12:22</date_sold> </item> Now what I would like to be able to do is to run that through an XSLT stylesheet such that I get ouput looking like this: Colour | In stock 1 week | In stock 2 weeks | In stock 3 weeks Red | 1 | 3 | 2 Blue | 0 | 2 | 1 Currently I have a stylesheet that uses basic muenchian grouping to show that 30% of stock was Red and 70% blue, but I can't see a way to find the number of nodes withing a given date range. Is there a way to use keys to select a range? Do I need to create some kind of intermediate data node? Is there a different route that shows I'm barking up the wrong tree with both those suggestions? Is this even possible with XSLT or do I need to find a way to change the data source?

    Read the article

  • How do I print out objects in an array in python?

    - by Jonathan
    I'm writing a code which performs a k-means clustering on a set of data. I'm actually using the code from a book called collective intelligence by O'Reilly. Everything works, but in his code he uses the command line and i want to write everything in notepad++. As a reference his line is >>>kclust=clusters.kcluster(data,k=10) >>>[rownames[r] for r in k[0]] Here is my code: from PIL import Image,ImageDraw def readfile(filename): lines=[line for line in file(filename)] # First line is the column titles colnames=lines[0].strip( ).split('\t')[1:] rownames=[] data=[] for line in lines[1:]: p=line.strip( ).split('\t') # First column in each row is the rowname rownames.append(p[0]) # The data for this row is the remainder of the row data.append([float(x) for x in p[1:]]) return rownames,colnames,data from math import sqrt def pearson(v1,v2): # Simple sums sum1=sum(v1) sum2=sum(v2) # Sums of the squares sum1Sq=sum([pow(v,2) for v in v1]) sum2Sq=sum([pow(v,2) for v in v2]) # Sum of the products pSum=sum([v1[i]*v2[i] for i in range(len(v1))]) # Calculate r (Pearson score) num=pSum-(sum1*sum2/len(v1)) den=sqrt((sum1Sq-pow(sum1,2)/len(v1))*(sum2Sq-pow(sum2,2)/len(v1))) if den==0: return 0 return 1.0-num/den class bicluster: def __init__(self,vec,left=None,right=None,distance=0.0,id=None): self.left=left self.right=right self.vec=vec self.id=id self.distance=distance def hcluster(rows,distance=pearson): distances={} currentclustid=-1 # Clusters are initially just the rows clust=[bicluster(rows[i],id=i) for i in range(len(rows))] while len(clust)>1: lowestpair=(0,1) closest=distance(clust[0].vec,clust[1].vec) # loop through every pair looking for the smallest distance for i in range(len(clust)): for j in range(i+1,len(clust)): # distances is the cache of distance calculations if (clust[i].id,clust[j].id) not in distances: distances[(clust[i].id,clust[j].id)]=distance(clust[i].vec,clust[j].vec) #print 'i' #print i #print #print 'j' #print j #print d=distances[(clust[i].id,clust[j].id)] if d<closest: closest=d lowestpair=(i,j) # calculate the average of the two clusters mergevec=[ (clust[lowestpair[0]].vec[i]+clust[lowestpair[1]].vec[i])/2.0 for i in range(len(clust[0].vec))] # create the new cluster newcluster=bicluster(mergevec,left=clust[lowestpair[0]], right=clust[lowestpair[1]], distance=closest,id=currentclustid) # cluster ids that weren't in the original set are negative currentclustid-=1 del clust[lowestpair[1]] del clust[lowestpair[0]] clust.append(newcluster) return clust[0] def kcluster(rows,distance=pearson,k=4): # Determine the minimum and maximum values for each point ranges=[(min([row[i] for row in rows]),max([row[i] for row in rows])) for i in range(len(rows[0]))] # Create k randomly placed centroids clusters=[[random.random( )*(ranges[i][1]-ranges[i][0])+ranges[i][0] for i in range(len(rows[0]))] for j in range(k)] lastmatches=None for t in range(100): print 'Iteration %d' % t bestmatches=[[] for i in range(k)] # Find which centroid is the closest for each row for j in range(len(rows)): row=rows[j] bestmatch=0 for i in range(k): d=distance(clusters[i],row) if d<distance(clusters[bestmatch],row): bestmatch=i bestmatches[bestmatch].append(j) # If the results are the same as last time, this is complete if bestmatches==lastmatches: break lastmatches=bestmatches # Move the centroids to the average of their members for i in range(k): avgs=[0.0]*len(rows[0]) if len(bestmatches[i])>0: for rowid in bestmatches[i]: for m in range(len(rows[rowid])): avgs[m]+=rows[rowid][m] for j in range(len(avgs)): avgs[j]/=len(bestmatches[i]) clusters[i]=avgs return bestmatches

    Read the article

  • Proper way to use Linq with WPF

    - by Ingó Vals
    I'm looking for a good guide into the right method of using Linq to Sql together with WPF. Most guides only go into the bare basics like how to show data from a database but noone I found goes into how to save back to the database. Can you answer or point out to me a guide that can answer these questions. I have a separate Data project because the same data will also be used in a web page so I have the repository method. That means I have a seperate class that uses the DataContext and there are methods like GetAllCompanies() and GetCompanyById ( int id ). 1) Where there are collections is it best to return as a IQueryable or should I return a list? Inside the WPF project I have seen reccomendations to wrap the collection in a ObservabgleCollection. 2) Why should I use ObservableCollection and should I use it even with Linq / IQueryable Some properties of the linq entities should be editable in the app so I set them to two-way mode. That would change the object in the observableCollection. 3) Is the object in the ObservableCollection still a instance of the original linq entity and so is the change reflected in the database ( when submitchanges is called ) I should have somekind of save method in the repository. But when should I call it? What happens if someone edits a field but decides not to save it, goes to another object and edits it and then press save. Doesn't the original change also save? When does it not remember the changes to a linq entity object anymore. Should I instance the Datacontext class in each method so it loses scope when done. 4) When and how to call the SubmitChanges method 5) Should I have the DataContext as a member variable of the repository class or a method variable To add a new row I should create a new object in a event ( "new" button push ) and then add it to the database using a repo method. 6) When I add the object to the database there will be no new object in the ObservableCollection. Do I refresh somehow. 7) I wan't to reuse the edit window when creating new but not sure how to dynamically changing from referencing selected item from a listview to this new object. Any examples you can point out.

    Read the article

  • log4j performance

    - by Bob
    Hi, I'm developing a web app, and I'd like to log some information to help me improve and observe the app. (I'm using Tomcat6) First I thought I would use StringBuilders, append the logs to them and a task would persist them into the database like every 2 minutes. Because I was worried about the out-of-the-box logging system's performance. Then I made some test. Especially with log4j. Here is my code: Main.java public static void main(String[] args) { Thread[] threads = new Thread[LoggerThread.threadsNumber]; for(int i = 0; i < LoggerThread.threadsNumber; ++i){ threads[i] = new Thread(new LoggerThread("name - " + i)); } LoggerThread.startTimestamp = System.currentTimeMillis(); for(int i = 0; i < LoggerThread.threadsNumber; ++i){ threads[i].start(); } LoggerThread.java public class LoggerThread implements Runnable{ public static int threadsNumber = 10; public static long startTimestamp; private static int counter = 0; private String name; public LoggerThread(String name) { this.name = name; } private Logger log = Logger.getLogger(this.getClass()); @Override public void run() { for(int i=0; i<10000; ++i){ log.info(name + ": " + i); if(i == 9999){ int c = increaseCounter(); if(c == threadsNumber){ System.out.println("Elapsed time: " + (System.currentTimeMillis() - startTimestamp)); } } } } private synchronized int increaseCounter(){ return ++counter; } } } log4j.properties log4j.logger.main.LoggerThread=debug, f log4j.appender.f=org.apache.log4j.RollingFileAppender log4j.appender.f.layout=org.apache.log4j.PatternLayout log4j.appender.f.layout.ConversionPattern=%d{ABSOLUTE} %5p %c{1}:%L - %m%n log4j.appender.f.File=c:/logs/logging.log log4j.appender.f.MaxFileSize=15000KB log4j.appender.f.MaxBackupIndex=50 I think this is a very common configuration for log4j. First I used log4j 1.2.14 then I realized there was a newer version, so I switched to 1.2.16 Here are the figures (all in millisec) LoggerThread.threadsNumber = 10 1.2.14: 4235, 4267, 4328, 4282 1.2.16: 2780, 2781, 2797, 2781 LoggerThread.threadsNumber = 100 1.2.14: 41312, 41014, 42251 1.2.16: 25606, 25729, 25922 I think this is very fast. Don't forget that: in every cycle the run method not just log into the file, it has to concatenate strings (name + ": " + i), and check an if test (i == 9999). When threadsNumber is 10, there are 100.000 loggings and if tests and concatenations. When it is 100, there are 1.000.000 loggings and if tests and concatenations. (I've read somewhere JVM uses StringBuilder's append for concatenation, not simple concatenation). Did I missed something? Am I doing something wrong? Did I forget any factor that could decrease the performance? If these figures are correct I think, I don't have to worry about log4j's performance even if I heavily log, do I?

    Read the article

  • Java "compare cannot be resolved to a type" error

    - by King Triumph
    I'm getting a strange error when attempting to use a comparator with a binary search on an array. The error states that "compareArtist cannot be resolved to a type" and is thrown by Eclipse on this code: Comparator<Song> compare = new Song.compareArtist(); I've done some searching and found references to a possible bug with Eclipse, although I have tried the code on a different computer and the error persists. I've also found similar issues regarding the capitalization of the compare method, in this case compareArtist. I've seen examples where the first word in the method name is capitalized, although it was my understanding that method names are traditionally started with a lower case letter. I have experimented with changing the capitalization but nothing has changed. I have also found references to this error if the class doesn't import the correct package. I have imported java.util in both classes in question, which to my knowledge allows the use of the Comparator. I've experimented with writing the compareArtist method within the class that has the binary search call as well as in the "Song" class, which according to my homework assignment is where it should be. I've changed the constructor accordingly and the issue persists. Lastly, I've attempted to override the Comparator compare method by implementing Comparator in the Song class and creating my own method called "compare". This returns the same error. I've only moved to calling the comparator method something different than "compare" after finding several examples that do the same. Here is the relevant code for the class that calls the binary search that uses the comparator. This code also has a local version of the compareArtist method. While it is not being called currently, the code for this method is the same as the in the class Song, where I am trying to call it from. Thanks for any advice and insight. import java.io.*; import java.util.*; public class SearchByArtistPrefix { private Song[] songs; // keep a direct reference to the song array private Song[] searchResults; // holds the results of the search private ArrayList<Song> searchList = new ArrayList<Song>(); // hold results of search while being populated. Converted to searchResults array. public SearchByArtistPrefix(SongCollection sc) { songs = sc.getAllSongs(); } public int compareArtist (Song firstSong, Song secondSong) { return firstSong.getArtist().compareTo(secondSong.getArtist()); } public Song[] search(String artistPrefix) { String artistInput = artistPrefix; int searchLength = artistInput.length(); Song searchSong = new Song(artistInput, "", ""); Comparator<Song> compare = new Song.compareArtist(); int search = Arrays.binarySearch(songs, searchSong, compare);

    Read the article

  • Counting Alphabetic Characters That Are Contained in an Array with C

    - by Craig
    Hello everyone, I am having trouble with a homework question that I've been working at for quite some time. I don't know exactly why the question is asking and need some clarification on that and also a push in the right direction. Here is the question: (2) Solve this problem using one single subscripted array of counters. The program uses an array of characters defined using the C initialization feature. The program counts the number of each of the alphabetic characters a to z (only lower case characters are counted) and prints a report (in a neat table) of the number of occurrences of each lower case character found. Only print the counts for the letters that occur at least once. That is do not print a count if it is zero. DO NOT use a switch statement in your solution. NOTE: if x is of type char, x-‘a’ is the difference between the ASCII codes for the character in x and the character ‘a’. For example if x holds the character ‘c’ then x-‘a’ has the value 2, while if x holds the character ‘d’, then x-‘a’ has the value 3. Provide test results using the following string: “This is an example of text for exercise (2).” And here is my source code so far: #include<stdio.h> int main() { char c[] = "This is an example of text for exercise (2)."; char d[26]; int i; int j = 0; int k; j = 0; //char s = 97; for(i = 0; i < sizeof(c); i++) { for(s = 'a'; s < 'z'; s++){ if( c[i] == s){ k++; printf("%c,%d\n", s, k); k = 0; } } } return 0; } As you can see, my current solution is a little anemic. Thanks for the help, and I know everyone on the net doesn't necessarily like helping with other people's homework. ;P

    Read the article

  • Calculating next date in Turbo Pascal

    - by Chaima Chaimouta
    program date; uses wincrt; var m,ch,ch1,ch2,ch3: string ; mois,j,a,b: integer ; begin write('a');read(a); write('j');read(j); write('mois');read(mois); case mois of 1,3,5,7,8,10: if j<31 then begin b:=j+1; m:=str(b,ch)+'/'+str(mois,ch2)+'/'+str(a,ch3); else if j=31then b:=1; s:=mois+1; m:=concat(str(b,ch),'/',str(s,ch2),'/',str(a,ch3)); end else m:='erreur'; 4,6,9,11:if j<30 then begin b:=j+1; m:=concat(str(b,ch),'/',str(mois,ch2),'/',str(a,ch3)); end else j=30 then begin b:=1; s:=mois+1; m:=concat(str(b,ch),'/',str(mois,ch2),'/',str(a,ch3)); end else m:='erreur'; 2:if j<28 then begin b:=j+1; m:=concat(str(b,ch),'/',str(mois,ch2),'/',str(a,ch3)); end else if j=28 then begin b:=1; m:=concat(str(b,ch),'/',str(mois,ch2,'/',str(a,ch3)); end else if((a mod 4=0)AND (a mod 100<>0)) or ((a mod 100=0)and(a mod 400=0)) then if j<29 then begin b:=j+1; m:=concat(str(b,ch),'/',str(mois,ch2,'/',str(a,ch3)); end else if j=29 then begin b:=1; m:=concat(str(b,ch),'/',str(mois,ch2,'/',str(a,ch3)); end else m:='erreur'; 12:if j<31 then begin b:=j+1; m:=concat(str(b,ch),'/',str(mois,ch2,'/',str(a,ch3)); end else if j=31 then begin b:=1; s:=a+1; m:=concat(str(b,ch),'/',str(mois,ch2,'/',str(s,ch3)); end; writeln(m); end. this is my program i hope you be able to help me

    Read the article

  • Recommendations for a free GIS library supporting raster images

    - by gspr
    Hi. I'm quite new to the whole field of GIS, and I'm about to make a small program that essentially overlays GPS tracks on a map together with some other annotations. I primarily need to allow scanned (thus raster) maps (although it would be nice to support proper map formats and something like OpenStreetmap in the long run). My first exploratory program uses Qt's graphics view framework and overlays the GPS points by simply projecting them onto the tangent plane to the WGS84 ellipsoid at a calibration point. This gives half-decent accuracy, and actually looks good. But then I started wondering. To get the accuracy I need (i.e. remove the "half" in "half-decent"), I have to correct for the map projection. While the math is not a problem in itself, supporting many map projection feels like needless work. Even though a few projections would probably be enough, I started thinking about just using something like the PROJ.4 library to do my projections. But then, why not take it all the way? Perhaps I might aswell use a full-blown map library such as Mapnik (edit: Quantum GIS also looks very nice), which will probably pay off when I start to want even more fancy annotations or some other symptom of featuritis. So, finally, to the question: What would you do? Would you use a full-blown map library? If so, which one? Again, it's important that it supports using (and zooming in and out with) raster maps and has pretty overlay features. Or would you just keep it simple, and go with Qt's own graphics view framework together with something like PROJ.4 to handle the map projections? I appreciate any feedback! Some technicalities: I'm writing in C++ with a Qt-based GUI, so I'd prefer something that plays relatively nicely with those. Also, the library must be free software (as in FOSS), and at least decently cross-platform (GNU/Linux, Windows and Mac, at least). Edit: OK, it seems I didn't do quite enough research before asking this question. Both Quantum GIS and Mapnik seem very well suited for my purpose. The former especially so since it's based on Qt.

    Read the article

  • Choosing the right .NET architecture. WCF? WPF/Forms, ASP.NET (MVC)?

    - by Tommy Jakobsen
    I’m in the situation that I have to design and implement a rather big system from the bottom. I’m having some (a lot actually) questions about the architecture that I would like your comments and thoughts on. I don’t hope that I’ve written too much here, but I wanted to give you all an idea of what the system is. Quick info about the applications, read if you want: I can’t share much detail about the project, but basically it’s a system where we offer our customer a service to manage their users. We have a hotline where the users call and our hotline uses an (windows) application (intranet) to manage the user’s data, etc. The customer also has a web application where they can see reports, information about their business and users, and the ability to modify their data. Modifying data is not just user data like address and so, but also information about the products/services the user has, which can be complicated. The applications will be built on Microsoft .NET Framework 4, with a MS SQL Server 2008 database. There will be a few applications that have to access this database, such as: Intranet application (used by us and our hotline) Customer web application type 1 Customer web application type 2 Customer web application type n different applications) … Now my big problem is what .NET parts I should use for such a system. For the “backend” I’ve considered using Windows Communication Foundation: Would WCF be a good choice? The intranet application will be an application that has to edit lots of records in the database. It has to be easy to navigate using the keyboard (fast to work with). Has a feature such as “find customer, find that, lookup this, choose this and update that”. What would be the best choice to develop this application in? Would it be WPF or good old Windows Forms? I don’t need all of the fancy graphics features in WPF, like 3D, but the application has to look nice (maybe something like the new Visual Studio/Office tools). And the same question goes for the web pages. They have much the same work to do, but not as many features as the intranet application, and not the same amount of data (much less). That is my questions for now. I’m hoping to get a discussion going that will open my eyes to some of these technologies, helping me decide architecture to go with. I would like to say thanks in advance, and let you all know that any thoughts will be much appreciated.

    Read the article

  • Can output from OutputDebugString be viewed in VisualStudio's output window

    - by wageoghe
    I am using C# and VS2010. When I use OutputDebugString to write debug information, should it show up in the output window? I can see the output from OutputDebugString in DebugView, but I thought I would see it in Visual Studio's Output window. I have looked under Tools-Options-Debugging-General and the output is NOT being redirected to the Immediate window. I have also looked under Tools-Options-Debugging-Output Window and all General Output Settings are set to "On". Finally, I have used the drop-down list in the Output window to specify that Debug messages should appear. If I change Tools-Options-Debugging-General to redirect the output to the Immediate window, the OutputDebugString messages do not appear in the immediate window. Here is my entire test program: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Runtime.InteropServices; using System.Diagnostics; namespace OutputDebugString { class Program { [DllImport("kernel32.dll", CharSet = CharSet.Auto)] public static extern void OutputDebugString(string message); static void Main(string[] args) { Console.WriteLine("Main - Enter - Console.WriteLine"); Debug.WriteLine("Main - Enter - Debug.WriteLine"); OutputDebugString("Main - Enter - OutputDebugString"); OutputDebugString("Main - Exit - OutputDebugString"); Debug.WriteLine("Main - Exit - Debug.WriteLine"); Console.WriteLine("Main - Exit - Console.WriteLine"); } } } If I run within the debugger, the Debug.WriteLine output does show up in the output window, but the OutputDebugString output does not. If I run from a console window, both Debug.WriteLine and OutputDebugString show up in DebugView. Why doesn't the OutputDebugString output ever show up in the output window? Ultimately, my intent is not to write a lot of debug output with OutputDebugString, rather I will use System.Diagnostics or NLog or something similar. I am just trying to find out, if I configure a logging platform to write to OutputDebugString, will the output be visible from within the debugger. Edit: I went back to my original program (not the simple test above) which uses TraceSources and TraceListeners configured via the app.config file. If I configure the trace sources to write to the System.Diagnostics.DefaultTraceListener (which is documented as writing to OutputDebugString), then the trace source output DOES go to the debug window. However, lines that write directly with OutputDebugString (such as in my simple example) DO NOT go to the debug window. Also, if I use a different TraceListener that writes to OutputDebugString (I got one from Ukadc.Diagnostics at codeplex), that output DOES NOT go to the debug window. Note that I have seen these questions but they did not provide a working solution: here and here

    Read the article

  • Need help with auto-scaffolding template in ASP.NET MVC

    - by DanM
    I'm trying to write an auto-scaffolder for Index views. I'd like to be able to pass in a collection of models or view-models (e.g., IQueryable<MyViewModel>) and get back an HTML table that uses the DisplayName attribute for the headings (th elements) and Html.Display(propertyName) for the cells (td elements). Each row should correspond to one item in the collection. Here's what I have so far: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <% var items = (IQueryable<TestProj.ViewModels.TestViewModel>)Model; // Should be generic! var properties = items.First().GetMetadata().Properties .Where(pm => pm.ShowForDisplay && !ViewData.TemplateInfo.Visited(pm)); %> <table> <tr> <% foreach(var property in properties) { %> <th> <%= property.DisplayName %> </th> <% } %> </tr> <% foreach(var item in items) { %> <tr> <% foreach(var property in properties) { %> <td> <%= Html.Display(property.DisplayName) %> // This doesn't work! </td> <% } %> </tr> <% } %> </table> Two problems with this: I'd like it to be generic. So, I'd like to replace var items = (IQueryable<TestProj.ViewModels.TestViewModel>)Model; with var items = (IQueryable<T>)Model; or something to that effect. The <td> elements are not working because the Html in <%= Html.Display(property.DisplayName) %> contains the model for the view, which is a collection of items, not the item itself. Somehow, I need to obtain an HtmlHelper object whose Model property is the current item, but I'm not sure how to do that. How do I solve these two problems?

    Read the article

  • LsaAddAccountRights not working for me

    - by SteveL
    Using: Delphi 2010 and the JEDI Windows API and JWSCL I am trying to assign the Logon As A Service privilege to a user using LsaAddAccountRights function but it does not work ie. after the function returns, checking in Group Policy Editor shows that the user still does not have the above mentioned privilege. I'm running the application on Windows XP. Would be glad if someone could point out what is wrong in my code: unit Unit1; interface uses Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms, Dialogs, StdCtrls, JwaWindows, JwsclSid; type TForm1 = class(TForm) Button1: TButton; procedure Button1Click(Sender: TObject); private { Private declarations } public { Public declarations } end; var Form1: TForm1; implementation {$R *.dfm} function AddPrivilegeToAccount(AAccountName, APrivilege: String): DWORD; var lStatus: TNTStatus; lObjectAttributes: TLsaObjectAttributes; lPolicyHandle: TLsaHandle; lPrivilege: TLsaUnicodeString; lSid: PSID; lSidLen: DWORD; lTmpDomain: String; lTmpDomainLen: DWORD; lTmpSidNameUse: TSidNameUse; lPrivilegeWStr: String; begin ZeroMemory(@lObjectAttributes, SizeOf(lObjectAttributes)); lStatus := LsaOpenPolicy(nil, lObjectAttributes, POLICY_LOOKUP_NAMES, lPolicyHandle); if lStatus <> STATUS_SUCCESS then begin Result := LsaNtStatusToWinError(lStatus); Exit; end; try lTmpDomainLen := DNLEN; // In 'clear code' this should be get by LookupAccountName SetLength(lTmpDomain, lTmpDomainLen); lSidLen := SECURITY_MAX_SID_SIZE; GetMem(lSid, lSidLen); try if LookupAccountName(nil, PChar(AAccountName), lSid, lSidLen, PChar(lTmpDomain), lTmpDomainLen, lTmpSidNameUse) then begin lPrivilegeWStr := APrivilege; lPrivilege.Buffer := PChar(lPrivilegeWStr); lPrivilege.Length := Length(lPrivilegeWStr) * SizeOf(Char); lPrivilege.MaximumLength := lPrivilege.Length; lStatus := LsaAddAccountRights(lPolicyHandle, lSid, @lPrivilege, 1); Result := LsaNtStatusToWinError(lStatus); end else Result := GetLastError; finally FreeMem(lSid); end; finally LsaClose(lPolicyHandle); end; end; procedure TForm1.Button1Click(Sender: TObject); begin AddPrivilegeToAccount('Sam', 'SeServiceLogonRight'); end; end. Thanks in advance.

    Read the article

  • Wrong sessionID being used in callback, but only on one particular computer

    - by user210119
    I am writing a Python/Django web application that uses OAuth (for the TwitterAPI, not that it should matter). I am storing a session ID in my login function, and then after using OAuth to get the user's token, I try to retrieve the sessionID in my callback function. The callback function then always fails(throws an exception) because it can't find the OAuth token in the session. Through the debugger, I am able to determine that the session ID that the server is using is incorrect - it does not match the session ID that was stored in the login function. It's therefore unsurprising that the Oauth tokens were not there. The session that appears in the callback was the same one each time (until I tried deleting it - see "things I've tried below"), and it started out as an old session, with some data in it that is from a different django app running on the same server that I hadn't touched in a couple weeks. Here's the kicker: everything I described is an issue only on our production server, and only when connecting to it from my computer. Let me clarify: this only happens with my particular laptop. I can connect to the app just fine from someone else's computer. Other people cannot connect with their accounts on my computer. Furthmore, I can connect just fine to the app when it is running on my localhost using the built-in django webserver, just not to the production server. My setup: my server and local box are running= Django 1.2.0 and Python 2.6.5. My local box is running Snow Leopard and the Django webserver, the server is running Ubuntu, Apache2, and mod-wsgi. For sessions, I am using Django's default session backend (DB). Things I have tried, all to no avail: logging in with a different account, including new accounts that have never OAuthed to this app before Clearing cookies, using incognito mode, using a different web browser on my same computer. Each time, upon inspecting my cookies, the sessionID matched the sessionID in the login function and was different from the sessionID in the callback. deleting the session in the database that appears in the callback function, (the one that appeared to be old data). The callback function still fails, and the sessionID it appears to be using is now a new one using a different session backend (DB-cache, flat file, etc...) restarting the server, my computer, etc. My first question on StackOverflow, so bear with me if I didn't quite follow local conventions. I am just at a loss as to what to even look for - what are the things that could possibly be causing sessions to not work on my particular computer, and (so far!) only my particular computer?

    Read the article

  • MVC Rendered Partial, how to get partial/view model in main model post to controller

    - by user1475788
    I have a text file and when users upload the file, the controller action method parses that file using state machine and uses a generic list to store some values. I pass this back to the view in the form of an IEnumerable. Within my main view, based on this ienumerable list I render a partail view to iterate items and display labels and a textarea. Users could add their input in the text area. When the users hit the save button this ienumrable list from the partial view rendered is null. so please advice any solutions. here is my main view @model RunLog.Domain.Entities.RunLogEntry @{ ViewBag.Title = "Create"; Layout = "~/Views/Shared/_Layout.cshtml"; } @using (Html.BeginForm("Create", "RunLogEntry", FormMethod.Post, new { enctype = "multipart/form-data" })) { <div id="inputTestExceptions" style="display: none;"> <table class="grid" style="width: 450px; margin: 3px 3px 3px 3px;"> <thead> <tr> <th> Exception String </th> <th> Comment </th> </tr> </thead> <tbody> @if (Model.TestExceptions != null) { foreach (var p in Model.TestExceptions) { Html.RenderPartial("RunLogTestExceptionSummary", p); } } </tbody> </table> </div> } partial view as follows: @model RunLog.Domain.Entities.RunLogEntryTestExceptionDisplay <tr> <td> @Model.TestException@ </td> <td>@Html.TextAreaFor(Model.Comment, new { style = "width: 200px; height: 80px;" }) </td> </tr> Controller action [HttpPost] public ActionResult Create(RunLogEntry runLogEntry, String ServiceRequest, string Hour, string Minute, string AMPM, string submit, IEnumerable<HttpPostedFileBase> file, String AssayPerformanceIssues1, IEnumerable<RunLogEntryTestExceptionDisplay> models) { } The problem is test exceptions which contains exception string and comment is comming back null.

    Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >