Search Results

Search found 14983 results on 600 pages for 'zorin os'.

Page 562/600 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >

• Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem

  - by zchads

  Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem. Hardware Information: Buffalo Wireless Router/access point, Model: WZR-HP-G300NH-AP DSL Modem: Generic (actually not sure of manufacture). Service Provider: TOT (Thailand) Laptop-1: Windows XP and Belkin PCMIA Network Card Laptop-2: Windows XP unknown network card & Wifi Laptop-3: Windows 7 unknown network card & Wifi Outline of Problem/actions taken: After a recent power failure the router and laptop-1 connected to router were no longer able to access the internet. Actions taken to try and recover internet access: Using Laptop-1 tried to configure Router with PPPoe settings using software from Router Manufacture. During the installation process a Timeout error was experienced, unable to connect to WAN. Used Internet Explorer to communicate directly with Router using IP address. Changed settings to use PPPoe settings given by ISP. Router was not able to communicate with Internet. Repeated steps 1-4 again with no success. Reset Router and DSL modem. Repeated steps 1-4 again still no success. Tried connecting Laptop-1 directly to DSL to gain access to internet to research problem. No Network connection with DSL could be established…connection would be established for a second and then be lost and didn’t appear long enough to actually connect to DSL. Replugged LAN back into Router and connection was regained with laptop-1. Replugged Laptop-1 directly into DSL and again unable to establish network connection. Uninstalled network card and all of its drivers on Laptop-1. Reinstalled network card and drivers and tried connecting directly to DSL. Still unable to make network connection. Plugged DSL into Laptop-3 and Internet connection was established. Being Laptop-3 does not have a CD-Rom, Laptop-2 was tried to connect to the router. With Laptop-2 steps 1-7 ended up being repeated without success. Tried plugging Laptop-2 directly into DSL and again no network connection could be established. Using Laptop-3 with a direct connection to DSL downloaded latest Router FW. Installed router FW using Laptop-1. Tired the installation process again without success. Being desperate reinstalled OS on Laptop-1 still not success. Tried using “ipconfig” with router to see what was going on without success. With laptop-1 connected to DSL went through the “ipconfig /…” inputs to see if anything made a difference. Being the network card was not able to make a connection this provide very little information “media disconnected”. So now I have a router and two laptops which are unable to connect to the internet and sure could use some advice/help.

  Read the article

• How to set up dual quadro cards on RHEL 5.5?

  - by Alex J. Roberts

  I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

  Read the article

• tomcat5 HTTP 400 BAd Request

  - by Oneiroi

  OS is centOS 5.5 x64, rpm's are as follows: tomcat5-jsp-2.0-api-5.5.23-0jpp.9.el5_5 tomcat5-common-lib-5.5.23-0jpp.9.el5_5 tomcat5-servlet-2.4-api-5.5.23-0jpp.9.el5_5 tomcat5-server-lib-5.5.23-0jpp.9.el5_5 tomcat5-5.5.23-0jpp.9.el5_5 tomcat5-jasper-5.5.23-0jpp.9.el5_5 telnet localhost 8080 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. GET / HTTP/1.0 Host: localhost HTTP/1.1 400 Bad Request Server: Apache-Coyote/1.1 Date: Thu, 16 Sep 2010 15:06:21 GMT Connection: close alternatives --display java output: alternatives --display java java - status is manual. link currently points to /usr/lib/jvm/jre1.6.0_21/bin/java /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/java - priority 16000 slave keytool: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/keytool slave orbd: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/orbd slave pack200: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/pack200 slave rmid: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/rmid slave rmiregistry: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/rmiregistry slave servertool: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/servertool slave tnameserv: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/tnameserv slave unpack200: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/unpack200 slave jre_exports: /usr/lib/jvm-exports/jre-1.6.0-openjdk.x86_64 slave jre: /usr/lib/jvm/jre-1.6.0-openjdk.x86_64 slave java.1.gz: /usr/share/man/man1/java-java-1.6.0-openjdk.1.gz slave keytool.1.gz: /usr/share/man/man1/keytool-java-1.6.0-openjdk.1.gz slave orbd.1.gz: /usr/share/man/man1/orbd-java-1.6.0-openjdk.1.gz slave pack200.1.gz: /usr/share/man/man1/pack200-java-1.6.0-openjdk.1.gz slave rmid.1.gz: /usr/share/man/man1/rmid-java-1.6.0-openjdk.1.gz slave rmiregistry.1.gz: /usr/share/man/man1/rmiregistry-java-1.6.0-openjdk.1.gz slave servertool.1.gz: /usr/share/man/man1/servertool-java-1.6.0-openjdk.1.gz slave tnameserv.1.gz: /usr/share/man/man1/tnameserv-java-1.6.0-openjdk.1.gz slave unpack200.1.gz: /usr/share/man/man1/unpack200-java-1.6.0-openjdk.1.gz /usr/lib/jvm/jre-1.4.2-gcj/bin/java - priority 1420 slave keytool: /usr/lib/jvm/jre-1.4.2-gcj/bin/keytool slave orbd: (null) slave pack200: (null) slave rmid: (null) slave rmiregistry: /usr/lib/jvm/jre-1.4.2-gcj/bin/rmiregistry slave servertool: (null) slave tnameserv: (null) slave unpack200: (null) slave jre_exports: /usr/lib/jvm-exports/jre-1.4.2-gcj slave jre: /usr/lib/jvm/jre-1.4.2-gcj slave java.1.gz: (null) slave keytool.1.gz: (null) slave orbd.1.gz: (null) slave pack200.1.gz: (null) slave rmid.1.gz: (null) slave rmiregistry.1.gz: (null) slave servertool.1.gz: (null) slave tnameserv.1.gz: (null) slave unpack200.1.gz: (null) /usr/lib/jvm/jre1.6.0_21/bin/java - priority 2 slave keytool: (null) slave orbd: (null) slave pack200: (null) slave rmid: (null) slave rmiregistry: (null) slave servertool: (null) slave tnameserv: (null) slave unpack200: (null) slave jre_exports: (null) slave jre: (null) slave java.1.gz: (null) slave keytool.1.gz: (null) slave orbd.1.gz: (null) slave pack200.1.gz: (null) slave rmid.1.gz: (null) slave rmiregistry.1.gz: (null) slave servertool.1.gz: (null) slave tnameserv.1.gz: (null) slave unpack200.1.gz: (null) Current `best' version is /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/java. Same occurs trying HTTP/1.1, and I am at a complete loss as to why.

  Read the article

• shell script to start multiple Java programs from a directory at boot

  - by zcourts

  I'm not sure if this is the best approach to this, It's my first time doing all of this (including writing shell scripts). OS: Centos My problem: I want to start multiple shell scripts at boot. One of the shell scripts is to start my own services and 3 others are for third party services. The shell script to start my own services will be looking for jar files. I currently have two services (will change), written in Java. All services are named under convention prefix-service-servicename What I've done: I created the following directory structure /home/username/scripts init.sh boot/ boot/startthirdprtyservice1.sh boot/startthirdprtyservice2.sh boot/startthirdprtyservice3.sh boot/startmyservices.sh /home/username/services prefix-lib-libraryname.jar prefix-lib-libraryname.jar prefix-service-servicename.jar prefix-service-servicename.jar prefix-service-servicename.jar In init.sh I have the following: #!/bin/sh #This scripts run all executable scripts in the boot directory at boot #done by adding this script to the file /etc/rc.d/rc.local #nohup #run-parts /home/username/scripts/boot/* #for each file in the boot dir... # ignore the HUP (hangup) signal for s in ./boot/*;do if [ -x $s ]; then echo "Starting $s" nohup $s & fi done echo "Done starting bootup scripts " echo "\n" In the script boot/startmyservices.sh I have #!/bin/sh fnmatch () { case "$2" in $1) return 0 ;; esac ; return 1 ; } ##sub strin to match for SUBSTRING="prefix-service" for s in /home/username/services/*;do if [ -x $s ]; then #match service in the filename , i.e. only services are started if fnmatch "$SUBSTRING" "$s" ; then echo "Starting $s " nohup $s & fi fi done echo "Done starting Services" echo "\n" Finally: Usually you can stick a program in /etc/rc.d/rc.local for it to be run at boot but I don't think this works in this case, or rather I don't know what to put in there I've just learnt how to do this by reading up a bit so I'm not sure its particularly the best thing to do so any advice is appreciated. When I run init.sh nohup.out contains Starting the thirdparty daemon... thirdparty started... .... but nothing from myservices.sh and my Java services aren't running I'm not sure where to start debugging or what could be going wrong. Edit Found some issues and got it to work, used -x instead of -n to check if the string is none zero, needed the sub string check to also be if [[ $s = $SUBSTRING ]] ; then and this last one was just stupid, missing java -jar in front of $s Still unsure of how to get init.sh to run at boot though

  Read the article

• Troubleshooting an unstable internet connection

  - by Konrad Rudolph

  My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

  Read the article

• Ubuntu Newbie Needs Assistance!!

  - by Steve Greene

  New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

  Read the article

• XP OEM licensing when reinstalling Windows XP

  - by mindas

  My wife has managed to buy a Dell laptop she was using at her ex-employer that just went bust. The problem with it is the OS (Windows XP) which takes ages to boot and is generally disproportionally slow to the hardware of the machine. So my aim is to sacrifice a day and reinstall it. The problem I am slightly worried about is the licensing/registration/activation hell. Apart from the sticker (with WinXP license key), the laptop has no other paperwork proving this license is legitimate. I believe this was originally an OEM license. Unfortunately, I don't have the the installation CD. This computer also has MS Office installed (which I would like to retain) but it none of MS Office apps would launch due to some obscure error complaining about lack of free disk space (which computer has plenty of). I have absolutely no clue what kind of license this MS Office was. And because the company has gone into the administration, there is no way of getting this information nor installable media. I believe that by buying the hardware I have also acquired the software which I can use as I see fit. Correct me if I'm wrong. Above said, my question would be: What is the easiest way of reinstalling the XP? By easiest I mean avoiding spending my time to prove Microsoft support I've got the right to use the software (insert your computer says noooo joke here) but still being able to get to fresh virgin activated legal state of the XP. I used to work as a sysadmin many years ago so I am not afraid of any technical difficulties. The same question applies to MS Office. I imagine the process would consist of backing up all the data, pulling some bits from the registry and using that on the fresh install. As for reinstall I'd expect to use some sort of OEM Windows repair CD from Dell, right? Are those freely available? My other box (HP) has such a thing and it can't be used on any other brand. I'm sure somebody had to go through this licensing hell and could share his/her tips. Thanks in advance.

  Read the article

• Adding a Microsoft Exchange 2010 account to my Windows Phone 7.5 mobile (Nokia Lumia 800) without trusted certificate

  - by MAXE

  I have problems in creating an account on my Nokia Lumia 800 (OS version: 7.10.8773.98, of course with Windows Phone 7.1 mounted with all updates) to one of my company's Microsoft Exchange 2010 server, because it cannot provide a trusted certificate...but only when contacting it from outside my network (like https ://mail.(CompanyName).com). Accessing the server from inside my network (pointing directly to the machine name or internal IP address: https ://(MachineName) or https ://10.0.1.200) gives me NO PROBLEM AT ALL! Setting correctly (I guess) all the parameters for the account (accessing from outside my network), the connection (after correctly set my credentials as asked) will not be established. It gives the next error (translated from my language manually): Error of <CompanyName> There is a problem with the certificate of (Server Address). Please contact support or the provider. Last try: X minutes ago Error code: 80072F06 I've tried all possible configurations and parameters (including the check The server requires an encrypted (SSL) connection, of course), but no way. EDITED: As suggested by Oliver Salzburg, I also tried this way without any results. I tried so: I went to my OWA (Outlook Web Access) that gives me the same problem (problems the certificate, it's not trusted) After accepting to continue, I clicked on the Error in Certificate button of the Internet Explorer 9 address bar - Show Certificates - page Details, show: - Copy to file... button - in the exporting wizard: Next - Binary encoding DER X.509 (.cer) (but there was also Base binary 64 X.509 (.cer), no way) - Next - saved to a new file From my Google Mail Account, I sent a mail to myself the certificate as attachment I read the mail from my WP7 phone, saved the attachment and then ran it: answering Yes to Do you wany to install the certificate? of course... Closed any active program and rebooted the phone Re-tried in synchronizing my account....:(...SAME PROBLEM! EDITED 2: Thanks again to Oliver Salzburg, I tried the next solution: I went to the site https://www.testexchangeconnectivity.com/ I selected Exchange ActiveSync option, as suggested I setted all my parameters, as I made for my phone I also setted the option Ignore SSL attendibility (and in another test I didn't) I performed my test This is the complete log (I removed my parameters): Seems the same problem (machine name in the certificate is different from the external Exchange website domain name?)! It is possible to get rid of this annoying (I know by myself who is this server!) problem? Thank you very much.

  Read the article

• MySQL Execution Time Spikes

  - by Brett

  I am having issues with MySQL all of the sudden today. Details: OS: CentOS release 5.7 Server type: Parallels virtuozzo container running on mediatemple DV 4.0 package Average total memory usage: <500mb Total memory usage allowed: 1gb (part of shared pool for emergency only, users are only guaranteed 500mb) Processor: 1ghz Main database sizes with most usage: 275mb & 107mb server stack: nginx 1.0.10, mysql 5.1.54, php 5.3.8 with php-fpm innodb_buffer_pool_size=100M php-fpm max children: 5 Webapps: custom php-based sites, magento & drupal slow query timeout is set to 1 second Steps I completed towards diagnosis: Cannot restart container yet - I will try later tonight when our domestic traffic has dropped Enabled mysql and php-fpm slowlog. Found functions that did DB queries in php-fpm slowlog were taking over 1s to complete at times Found some simple queries in mysql slowlog taking well over 1s to complete that should take less than 1s. Most interesting - execution time seems to spike at times. A query will take .2s a couple times, then one time it will take 8s to run the same query. These results were verified by running raw SQL queries through mysql command line. Top does not reveal anything too interesting Only resource related thing i can see is load averages much higher than normal Up until today, mysql has been fine, there have been no major changes to the db since yesterday. Sometimes things are so bad, I am seeing bad gateway errors after 60s of execution time. Innodb is doing on average 300-1400 reads/sec. Mysql is doing 3-10 queries/sec slow query count in 2 hours uptime is 171 (with slow timeout at 1 second) Tried restarting mysql, nginx, php-fpm multiple times For example: UPDATE `catalogsearch_query` SET `query_text` = 'EW 90', `num_results` = '7532', `popularity` = '99180', `redirect` = NULL, `synonym_for` = NULL, `store_id` = '1', `display_in_terms` = '1', `is_active` = '1', `is_processed` = '1', `updated_at` = '2012-05-08 21:38:31' WHERE (query_id='31'); This query took 17sec to complete one time, rest of the time around .079 sec. But varies, sometimes 1sec, sometimes .004 sec. This is running the same query, over and over with a couple seconds time in between each. Most tables are innodb, and sometimes I noticed the lock time taking 90% of the query execution time, but most of the time lock time is insignificant. Any idea what's going on here?

  Read the article

• Troubleshooting major performance issue: Is culprit Intel RST, Hard drive, or something else?

  - by Sean Killeen

  The Setup I have the following components that come into play in this situation: ASUS P8Z68 V/PRO motherboard a RAID1 configuration (1x 1TB drive, 1 x 2TB drive -- I explain below), accelerated with an SSD using Intel's RST software, and 1 TB drive standing by as a spare. Core i7 2600k 32 GB RAM Windows 8.1 This box was designed to be beast, and until just recently, was very good at being just that. What's Happening The system has slowed to a crawl whenever it touches the disk. Things appear to work at normal speed when dealing with memory. For example, typing this is fine, but saving it to disk from notepad gave me a 5-7 second pause when clicking save. The disks appear to be at 100% all the time (e.g. the light on the disk access on the PC is solidly on -- not even any flashing) In ProcExp it appears that the disk is barely being utilized at all: Intel RST reports that everything is fine: Other Details Prior to this happening, RST had reported that my drives were failing (one went bad, one was throwing SMART events). This made sense; they were at the tail end of their warranty and the PC is on almost all the time. I RMA'd the drives via Seagate. In the meantime, I'd purchased a 2TB drive because I didn't realize that the 1TB drives were under warranty. I figured I'd replace the other 1 TB drive with another 2 TB when it died but then discovered the warranty. AFAIK, I haven't done any major updates since 8.1 and it worked fine after those. Question(s) How can I troubleshoot this? What is the best way to try to figure out why disks are being maxed out despite the OS reporting barely any disk usage and that everything is OK? Given the failures, etc. that I describe above, is it possible that the problem could be the I/O on the motherboard itself? If so, how would I even be able to diagnose it? I'm betting the drives that Seagate gave me are refurbished (didn't think to look; that's dumb). Is it possible that the same model drive, refurbished, could somehow cause this? In terms of how RAID1 works, is it possible that one drive is "falling behind" somehow, and that the RAID1 is constantly trying to fix the mirroring? If so, this seems like Intel RST would report on it, but I wanted to consider it as an option.

  Read the article

• Python Django sites on Apache+mod_wsgi with nginx proxy: highly fluctuating performance

  - by Halfgaar

  I have an Ubuntu 10.04 box running several dozen Python Django sites using mod_wsgi (embedded mode; the faster mode, if properly configured). Performance highly fluctuates. Sometimes fast, sometimes several seconds delay. The smokeping graphs are al over the place. Recently, I also added an nginx proxy for the static content, in the hopes it would cure the highly fluctuating performance. But, even though it reduced the number of requests Apache has to process significantly, it didn't help with the main problem. When clicking around on websites while running htop, it can be seen that sometimes requests are almost instant, whereas sometimes it causes Apache to consume 100% CPU for a few seconds. I really don't understand where this fluctuation comes from. I have configured the mpm_worker for Apache like this: StartServers 1 MinSpareThreads 50 MaxSpareThreads 50 ThreadLimit 64 ThreadsPerChild 50 MaxClients 50 ServerLimit 1 MaxRequestsPerChild 0 MaxMemFree 2048 1 server with 50 threads, max 50 clients. Munin and apache2ctl -t both show a consistent presence of workers; they are not destroyed and created all the time. Yet, it behaves as such. This tells me that once a sub interpreter is created, it should remain in memory, yet it seems sites have to reload all the time. I also have a nginx+gunicorn box, which performs quite well. I would really like to know why Apache is so random. This is a virtual host config: <VirtualHost *:81> ServerAdmin [email protected] ServerName example.com DocumentRoot /srv/http/site/bla Alias /static/ /srv/http/site/static Alias /media/ /srv/http/site/media WSGIScriptAlias / /srv/http/site/passenger_wsgi.py <Directory /> AllowOverride None </Directory> <Directory /srv/http/site> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> Ubuntu 10.04 Apache 2.2.14 mod_wsgi 2.8 nginx 0.7.65 Edit: I've put some code in the settings.py file of a site that writes the date to a tmp file whenever it's loaded. I can now see that the site is not randomly reloaded all the time, so Apache must be keeping it in memory. So, that's good, except it doesn't bring me closer to an answer... Edit: I just found an error that might also be related to this: File "/usr/lib/python2.6/subprocess.py", line 633, in __init__ errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1049, in _execute_child self.pid = os.fork() OSError: [Errno 12] Cannot allocate memory The server has 600 of 2000 MB free, which should be plenty. Is there a limit that is set on Apache or WSGI somewhere?

  Read the article

• HID USB Very Strange Problem...

  - by Lasanha

  I realy hope some one can help me here cause i search all over the web and nothing comes up.. I allways used PS/2 KB and Mouse and a USB KeyPad (Genius ErgoMedia 500 Gaming Explorer) to play some games, mmorpg, fps, you named, very good whit 11 keys whit possible macros etc etc... Now it comes the problem, i have a USB mouse that have 4 extra buttons, and i need more button, i love buttons.. Well, i plug in the USB mouse and disconectes de PS/2. Everything is ok until i toutch the mouse. If i do so, the ErgoMedia goes off, then on, then i mouse the mouse or press a button and all over again. Yesterday i went buying a new mouse that i liked, a USB mouse too (NPlay whit macros and all that stuff 3600dpi...) Hoping the problem was only whit the other mouse, but no.. It does the exact same thing, ErgoMedia keeps disconecting and conecting everytime i toutch the mouse. What i allready did: Update drivers of both mouses Update drivers of ErgoMedia (no specific drivers(Windows based)) Update drivers of MB Chipset (Actualy no, cause it was up to date allready) Trying other USB Ports (4 Ports back, 4 Ports Front and even 1 Port in 16 card slot device) Disable the "Allows Windows to shut down the energy bla bla" thing in Device Setings. Look up in the Device Setings only apear a problem on the ergomedia (Human interface Device) when i move the damm mouse.. Using Everest to read behavier, everything normal, exepts the disconecting thing, but no errors. Not a power suply, only the ErgoMedia and the mouse are in the USBs, and i allready disable the 16 card reader whit one usb slot to see.. Clean the IRQ registry. Look the entire internet for a fix solution. Help others problems wile looking for a fix for me (Im not a pro but not a completly stupid) Talking to you beggin you to help me as a last resorce... Machine: Acer M3641 Core2Quad 64x Based OS Vista 64b 4GbRAM HD Audio and Graphics I realy hope some one out there knows a fix for this, maybe it´s a simple thing, so simple that i´m to stupid to see that.. Sorry for my bad inglish but i write lot of erros even in my language. Any help will be very welcome. Tanks for ur concern and atention ^^

  Read the article

• OSX: Howto start VirtualBox VM on startup?

  - by snies

  The Question How do i start this Wiki VM at the startup of the OSX Server? I am running OSX Server 10.6.8 and VirtualBox 4.1.8 r75467 and a Debian Linux VM (called "wiki"). . What I tried so far Following this article: http://mikkel.hoegh.org/blog/2010/12/23/run-virtualbox-boot-mac-os-x/, i have wrote this plist and placed it in /Library/LaunchDaemons/bar.foo.WikiVirtualBox.plist: <plist version="1.0"> <dict> <key>Label</key> <string>bar.foo.WikiVirtualBox</string> <key>ProgramArguments</key> <array> <string>/usr/bin/VBoxHeadless</string> <string>-s</string> <string>wiki</string> </array> <key>RunAtLoad</key> <true></true> <key>UserName</key> <string>root</string> <key>WorkingDirectory</key> <string>/var/root</string> <key>StandardErrorPath</key> <string>/var/log/bar.foo.WikiVirtualBox.stderr.log</string> <key>StandardOutPath</key> <string>/var/log/bar.foo.WikiVirtualBox.stdout.log</string> </dict> </plist> and told launchd to start it: sudo launchctl load -w /Library/LaunchDaemons/bar.foo.WikiVirtualBox.plist . The Logfile But the VM doesn't start. A Look at tail -f /var/log/system.log shows: sudo[1909]: administrator : TTY=ttys000 ; PWD=/Users/administrator ; USER=root ; COMMAND=/bin/launchctl load -w /Library/LaunchDaemons/bar.foo.WikiVirtualBox.plist VBoxSVC[1914]: 3891612: (connectAndCheck) Untrusted apps are not allowed to connect to or launch Window Server before login. VBoxSVC[1914]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. com.apple.launchd[1] (bar.foo.WikiVirtualBox[1910]): Exited with exit code: 1 When i log into the server via ssh (so no login window opened) i can run: /usr/bin/VBoxHeadless -s wiki and it works. So i don't understand the error above.

  Read the article

• Unable to connect to SVN server on VPS : Subversion Configuration Problem

  - by Pritam Barhate

  Hello everybody, I purchased a VPS account (centos-5-x86_64) from Hostgator mainly for the purpose of setting up an online Subversion Server. This is the first time I am managing a VPS and my linux skills are not so great, but I have basic knowledge of the OS and have been using it on and off as desktop from last few years. So after foxing through a few tutorials online, as the first step I logged in using SSH root account provided by Hostgator and tried to run, yum install mod_dav_svn subversion As it turns out my account has Cpanel/WHM and since it some concept of easy apache straight forward procedure of yum install mod_dav_svn subversion won't work. After that I found out how it can be worked out by compiling the source and stuff. But the whole procedure looked long and scary. [I am just a linux nub]. so I decided I would just skip whole apache integration stuff and just access the server using svn:// protocol, anyways that's how I configure svn on our LAN. So I installed subversion using yum install subversion It installed fine. Then I created a folder /svn_repos/testproject and ran svnadmin create /svn_repos/testproject/ No Problems Using vi I changed svnserve.conf and passwd files for the repository and added a user with my name. Anonymous users don't have any access, authenticated users have write access. Then I started svnserve using svnserve -d then in same terminal window svn list svn://localhost/svn_repos/testproject Asks for authentication for realm, provided root password then for svn username and password. Provided both. The command returns nothing but exists properly. Returns nothing is understood I didn't import anything. But if try to access svn remotely using in another terminal: svn list svn://ip.add.of.server/svn_repos/testproject svn: Can't connect to host 'ip.add.of.server': Operation timed out Is what I get. Parallels Power Panel that I got from Hostgator reports that: The firewall is not active now. To activate the firewall, choose one of the firewall operation modes. So if firewall is not running and I can access svn using localhost, why the operation is timing out when I try to access svn from a remote machine? Experienced network admins please help. Thanks in advance. Also please suggest a good book which gives detailed information on configuring Dedicated servers + WHM and CPanel.

  Read the article

• File open fails initially when trying to open a file located on a win2k8 share but eventually can su

  - by Ruddy Douglass

  Core of the problem: I receive "(0x80070002) The system cannot find the file specified" for roughly 8 to 9 seconds before it can open it successfully. In a nutshell, we have two COM components. Component A calls into Component B and asks for a UNC filename to write to - the filename returned doesn't exist yet, but the path does - it then does its work, creates and populates the file, and tells Component B its done by making another com call. At that point Component B will call MoveFile to rename the file to its "official" name. This code has worked for (literally) years. Its works fine on win2k3. Its works fine when its running on win2k8 and points to a share on a win2k3 server. It also runs fine, if the share is actually located on the same win2k8 machine that the code is running on. But if you run it on win2k8 and point it to a share on a different win2k8 server, it fails. Both Component A & component B exist in their own Windows Service running with as a domain admin account. The shares are configured for "Everyone/Full control" in all test environments, similarly so are the underlying folders that the share points to. All machines are in the same domain. During debugging I realized the file actually does exist by the time I get to checking manually for it - after several iterations it occurred to me that the file doesn't "show up" until some delay passes by - so I put in the loop below in component B as shown below: int nCounter = 0; while (true) { CFileStatus fs; if (CFile::GetStatus(tempname, fs)) break; SleepEx(100, FALSE); nCounter++; } This code does, in fact, exit and nCounter is generally between 80 & 90 iterations when it does -- indicating the file "appears" approx 8 to 9 seconds later. Once that loop exits the code can successfully rename the file and all further processing appears to work. I put a CFile::GetStatus in component A immediately before it calls into Component B and that indicates success - it can see the file and get its true size yet the call into component b made immediately after can not see the file until the above indicated delay passes. I have verified the pathnames are precisely the same, even though it would clearly have to be for the calls to eventually succeed after a pause of 8 to 9 seconds... When something like this occurs I always assume there is a bug in my code until proven otherwise, but given (a) this code has executed properly for a very long time and (other than my diagnostic loop added) has not changed, and (b) it works in all environments except the win2k8 - win2k8 share, I'm guessing there is some OS issue in here that i do not understand. Any insight would be helpful. Thanks!

  Read the article

• Toshiba Satellite L630 broken after bios update

  - by Mustafa Kamal

  I have Toshiba Satellite L630, which has been broken. It had no more OS installed in it. All the disk partition were cleared into one single empty unformatted partition. So I begin to install windows XP on this laptop. Apparently, win XP's driver support for this laptop is very limited. So I have to find almost all important driver (display, sound, etherned, wireless etc) on the net and install it manually one by one. So I start googling, and I got some driver download page from several Toshiba's website (the global version, the europe, asia, etc). Pretty hard to find the exact drivers, but I managed to find pretty good drivers. It's all works quite fine, although still have a few glitches. But everything turned into a big mess when I downloaded the "BIOS Update", which is also listed on Toshiba's official driver directory site. When I installed it, it show a big red warning sign telling me not to do anything while flashing the BIOS . I follow that instruction prudently. The process was finished, and that update BIOS software (it is InsydeH2O BIOS) told me that the BIOS has been succesfully updated and the computer need to restart. So I restart the computer. This is where the problem appear. I can no longer boot to my laptop. The booting process seems to be able to enter windows for a moment (it shows the windows XP loading screen), and then suddenly it just got that hateful blue screen and then instantiy restarts the machine. It goes on a loop. Boot bios - enter XP - blue screen - restart. I can't even try to reinstall my win XP again. Evertime the machine tries to boot to win XP CD, it got the same blue screen as I gets when loading from HDD. Many google search results said that I should open the laptop cover and try to clear CMOS with some kind of jumper or something. Or to unplug/re-plug the CMOS battery. Do I really need to do that? Is there anyway I could do without disassembling my laptop? I read some tricks about booting from USB device but I can't get the exat tools that I need to do that thing... Btw, this is my detailed laptop number photographed from the back of my laptop

  Read the article

• Web Site Serving, Cloud-Computing, oh, my

  - by Frank

  I'm planning a software based service. To give it a bit of context (type of traffic), assume it similar to facebook in nature (with a little GitHub thrown in). I've been trying to understand my different hosting options. I've been using a shared host with GoDaddy for years just fine. I currently host a Wordpress web site there and I've not had any problems. Quite frankly, they've taken good care of me. However, the nature of a shared hosting environment is limited in nature. For example, I can't do anything but host a web site there. For example, I can not run a Mercurial server. Last time I attempted to build a web application with the intention of eventually launching it via GoDaddy, I ran in to all sorts of troubles because it was shared-hosted. Assembly issues, etc. At the time, the cost and time sank my project. (The lack of direct access was also frustrating.) (to be fair to godaddy, this was over 3 years ago) I've been looking at Rackspace or Amazon as a possible cloud solution but it seems to be just processing power and bandwidth (and an OS). From what I understand, I'd need to get Apache and MySQL Working on my own. The way cloud hosting is priced, however, seems appealing. I figure my final option might be to use a virtual private host. I think this would be more flexible than a shared-host site but less scalable than a cloud based server. So, I guess my question is what is an appropriate solution for someone who intends to build a web application service? I figure that I need to establish a hosting environment now rather than later so I can plan to effectively use the environment. I'd prefer to be fairly economical to start out with. I really can't afford to pay $999 (or even $99) while I build up the site and get the core functionality online but at the same time, I'd like to have the selected environment grow as needed. Thank you.

  Read the article

• Microphones not working on Apple macbook Air 1,1 (Early 2008) under Linux

  - by jj_p

  I'm running Linux on an mba. I can't make the microphones (neither external nor internal) work. I test using alsamixer and arecord -d 5 test-mic.waw together with aplay test-mic.waw It seems there is a problem with kernel trying to decipher Apple (intentionally) corrupted 'bios', in particular the mic pins are wrongly assigned. As far as we are concerned here, is there any difference between using EFI and BIOS-compatibility mode? (see https://wiki.archlinux.org/index.php/MacBook where they claim to have everything working out of the box on mba1,1) A nice proposal would be to compile the latest Linux kernel and run hda-jack-retask to find the right configuration (in the case of Realtek codec, the missing things I'm supposed to check are either some vendor-specific COEF verbs, EAPD or GPIO setup.), and then come up with a kernel patch to address the issue. Since I'm not that familiar with this last part of the story, can anyone help me through this process? Some useful data: The output from alsa script run as root http://www.alsa-project.org/db/?f=adae8ebee1007043fe83414ac4972319e02255fa The command hda-jack-sense-test -a (with external mic in) Pin 0x14 (Internal Speaker): present = No Pin 0x15 (Green HP Out): present = Yes Pin 0x16 (Not connected): present = No Pin 0x17 (Not connected): present = No Pin 0x18 (Not connected): present = No Pin 0x19 (Not connected): present = No Pin 0x1a (Not connected): present = No Pin 0x1b (Not connected): present = No Pin 0x1c (Not connected): present = No Pin 0x1d (Not connected): present = No Pin 0x1e (Not connected): present = No Pin 0x1f (Not connected): present = No Most likely the chip is Realtek ALC885 (compare also ALC889A) http://guide-images.ifixit.net/igi/bBTSqaeK5JpQ1AWe.large , although at the moment alsa reads it as ALC889A Takashi Iwai's tutorial https://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio.txt Some people researched the original files from a running OS X installation on this same model (I think the relevant files are AppleHDA.kext/Contents/MacOS/AppleHDA AppleHDA.kext/Contents/PlugIns/AppleHDAHardwareConfigDriver.kext/Contents/Info.p????list AppleHDA.kext/Contents/Resources/layout12.xml.zlib AppleHDA.kext/Contents/Resources/Platforms.xml.zlib) http://www.insanelymac.com/forum/topic/220090-alc889a-pin-configuration/#entry1554954 Datasheet http://www.realtek.info/pdf/ALC885_1-1.pdf (from the same Realtek, one can also try to download Linux driver, but this is just taken from ALSA project, as stated in the readme file.) Compare with this Arch guy http://www.alsa-project.org/db/?f=3ca8243c0626844f0264a3faad0aa72018bc14f4 Here for the first time support to audio (except mics) for mba1,2 (which is morally the same as 1,1) is patched into the kernel http://www.alsa-project.org/pipermail/alsa-devel/2010-February/025511.html The same jack supposedly works both for HP and ext MIC, I think it's called TRRS, and it's the same as the one used e.g. for iphones This guy might have done a similar job, though to a more recent version and for sound globally, not just mics: http://blogs.aerys.in/jeanmarc-leroux/2013/09/15/fixing-2013-macbook-air-ubuntu-sound-issue/ (this is mirror to http://unix.stackexchange.com/questions/73044/microphones-not-working-on-apple-macbook-air-1-1-early-2008-under-linux )

  Read the article

• Windows 7 laptop constantly dropping internet connection

  - by Corbin Holbert

  I have scoured the web for an answer and failed to find one. I am using a Toshiba Satellite laptop running Windows 7 64-Bit. I have the computer connected via Wifi. Now, I am no beginner with the Internet, or anything related to computers, as I have grown up teaching everyone around me how to use computers, and went to college for IT. Everything on my network works flawlessly at all times, except for this evil laptop. The worst part is that I fixed this once before a few years back and recently had to replace the hard drive and re-install the OS, but cannot for the life of me remember what I did to make this problem go away. I am in my browser, connected to the Internet. I click a link. Suddenly no internet access. All I do is click down on the WiFi connection in the task bar, disconnect and reconnect immediately. Internet is back the moment I hit "connect." I have read many people had the same issues as I am having, but they all had triggers or other network issues. I have no trigger (this happens literally five to six times per minute no matter what I am doing) and I have no problems with my router, modem, or any other devices or computers on said network. As I am a web designer, and like to test my work live at every turn- this is going to result in this laptop being in pieces if I can't get it fixed soon. If more info is needed, let me know and I will provide. Thanks for any help offered! EDIT: Network Card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC Network state reads as "No Internet Access" when the problem first occurs, then magically I have Internet access for about ten seconds once I disconnect and reconnect. I have turned off IPV6, I have turned off power saving options for the network adapter, no viruses. Any new ideas? Also, I had to disconnect and reconnect four times just to get to this edit screen- and will likely have to do the same just to post it- it's that bad.

  Read the article

• How to use Hardware RAID in Ubuntu Server

  - by user2071938

  I have an Adaptec RAID-Controller and created an RAID-1(Mirroring) succesfully. Now I have installed Ubuntu Server 12.04.3. When I type fdisk -l I get this output: bf@fileserver:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c454 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 499711 248832 83 Linux /dev/sdc2 501758 156301311 77899777 5 Extended /dev/sdc5 501760 156301311 77899776 8e Linux LVM Disk /dev/mapper/fileserver--vg-root: 75.6 GB, 75606523904 bytes 255 heads, 63 sectors/track, 9191 cylinders, total 147668992 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-root doesn't contain a valid partition table Disk /dev/mapper/ddf1_Data: 1000.1 GB, 1000065728512 bytes 255 heads, 63 sectors/track, 121584 cylinders, total 1953253376 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ddf1_Data doesn't contain a valid partition table Disk /dev/mapper/fileserver--vg-swap_1: 4160 MB, 4160749568 bytes 255 heads, 63 sectors/track, 505 cylinders, total 8126464 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-swap_1 doesn't contain a valid partition table The 80 GB HDD is for the System The 1000.2 GB HDD should be for my data. But I'm a bit confused becauser there are listed two 1000.2 GB HDDs, due the Hardware RAID shoudln't there be only one HDD vissible to the OS? (I have two 1000.2 GB HDDs in an Raid-1 Array) dmraid gives me bf@fileserver:~$ sudo dmraid -r /dev/sdb: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 /dev/sda: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 so It seems to be ok? But how do I partitionate this disks and which one should I mount(sdb or sda?) Hope you can help me thx Florian

  Read the article

• MacVim, Command-T: SEGV

  - by Ramon Tayag

  Details: OSX 10.7.4 I installed the latest MacVim via Homebrew: $ command-t brew install macvim ==> Downloading https://github.com/b4winckler/macvim/tarball/snapshot-64 Already downloaded: /Library/Caches/Homebrew/macvim-7.3-64.tgz ==> ./configure --with-features=huge --with-tlib=ncurses --enable-multibyte --with-macarchs=x86_64 --enable-perlinterp --enable-pythoninterp --enable-rubyinterp --enable-t ==> make getenvy ==> make ==> Caveats MacVim.app installed to: /usr/local/Cellar/macvim/7.3-64 To link the application to a normal Mac OS X location: brew linkapps or: ln -s /usr/local/Cellar/macvim/7.3-64/MacVim.app /Applications ==> Summary /usr/local/Cellar/macvim/7.3-64: 1733 files, 27M, built in 53 seconds $ command-t brew linkapps Linking /usr/local/Cellar/macvim/7.3-64/MacVim.app Finished linking. Find the links under ~/Applications. $ command-t ruby -v ruby 1.8.7 (2011-12-28 patchlevel 357) [universal-darwin11.0] $ command-t rvm list rvm rubies ree-1.8.7-2012.02 [ i686 ] ruby-1.8.7-p358 [ i686 ] ruby-1.9.2-p290 [ x86_64 ] ruby-1.9.2-p320 [ x86_64 ] ruby-1.9.3-p194 [ x86_64 ] # Default ruby not set. Try 'rvm alias create default <ruby>'. # => - current # =* - current && default # * - default $ command-t cd ~/.vim/bundle/vim-command-t/ruby/command-t ruby extconf.rb $ command-t ruby extconf.rb checking for ruby.h... yes creating Makefile $ command-t make cc -arch i386 -arch x86_64 -pipe -bundle -undefined dynamic_lookup -o ext.bundle ext.o match.o matcher.o -L. -L/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib -L. -arch i386 -arch x86_64 -lruby -lpthread -ldl -lobjc ld: warning: ignoring file ext.o, file was built for unsupported file format which is not the architecture being linked (i386) ld: warning: ignoring file match.o, file was built for unsupported file format which is not the architecture being linked (i386) ld: warning: ignoring file matcher.o, file was built for unsupported file format which is not the architecture being linked (i386) $ command-t mvim MacVim then opens here. But when I open Command-T, MacVim crashes and I see this in the command line: $ command-t dyld: lazy symbol binding failed: Symbol not found: _rb_intern2 Referenced from: /Users/ramon/.vim/bundle/vim-command-t/ruby/command-t/ext.bundle Expected in: flat namespace dyld: Symbol not found: _rb_intern2 Referenced from: /Users/ramon/.vim/bundle/vim-command-t/ruby/command-t/ext.bundle Expected in: flat namespace Vim: Caught deadly signal TRAP Vim: Finished. The problem I have is very similar to this, except that I switched to the system Ruby and still got the error.

  Read the article

• Partition table is corrupt

  - by Tim

  I have a corrupt the partition table on the laptop that is running Ubunutu 10.4. Before the partition table was corrupt I had the following partitions: 2 primary partitions: 1st - NTFS 2nd - Extended 4 logical partitons that are built within 2nd extended: 1st NTFS (68 Gib) 2nd Linux (19 Gib) 3rd Swap (1.4 Gib) 4th Linux (24 Gib) The physical order of these partitions was the following: ( 4th Linux ) - ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) The logical order of the partition was different: ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) ( 4th Linux ) NTFS partition was big and it resided between 2 Linux partitions, neither of these partitions had enough space to install Oracle 11g for my project with prof. Gamper and Markus Innerebner. Therefore, I decided to a) either move the NTFS partion to the left or b) remove it completely and extend partition where Linux resides. As I tool I have chosen GParted. But unfortunately it was not able to move the partition because he found that in NTFS partition there are some blocks that are referenced multiple times. Also it was not able to remove the partition neither, because in this case the partitions that follow it ( 2nd Linux ) - ( 3rd Swap ) have to be in his opinion also removed, because the organization of extended partition is a linked list. Since GParted was not able to do such thing I was trying to find another tool. I found diskdrake tool on PSLinuxOS distribution of linux. That tool silently deleted ( 1st NTFS ) partition and I thought that everything was fine. But diskdrake has damaged the partition in a way that I am not able either to boot from the hard disk nor to see the partitions with GParted and even with diskdrake itself! Fortunately I have a live CD of Ubuntu 8.10 and I am able to boot and see hard disk. I have 2 ideas how I can solve the problem: 1) Manually change disk partitions and point them to the correct partitions. 2) Create partition table with GParted that as much as possible is the same with the previous one I find the 2nd approach less time consuming but some data will be lost because of it is not possible to place borders of the partitions exactly how it was before. And moreover I am not sure if such approach would work, for example, if the OS is able to locate files after repartitioning. I feel like that it will but not 100% sure. Are there some ideas how the problem may be solved?

  Read the article

• RAID 50 24Port Fast Writes Slow Reads - Ubuntu

  - by James

  What is going on here?! I am baffled. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/dev/zero of=/Volumes/MercuryInternal/test/test.fs bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 57.0948 s, 735 MB/s serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/Volumes/MercuryInternal/test/test.fs of=/dev/null bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 116.189 s, 361 MB/s OF NOTE: My RAID50 is 3 sets of 8 disks. - This might not be the best config for SPEED. OS: Ubuntu 12.04.1 x64 Hardware Raid: RocketRaid 2782 - 24 Port Controller HardDriveType: Seagate Barracuda ES.2 1TB Drivers: v1.1 Open Source Linux Drivers. So 24 x 1TB drives, partitioned using parted. Filesystem is ext4. I/O scheduler WAS noop but have changed it to deadline with no seemingly performance benefit/cost. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo gdisk -l /dev/sdb GPT fdisk (gdisk) version 0.8.1 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sdb: 41020686336 sectors, 19.1 TiB Logical sector size: 512 bytes Disk identifier (GUID): 95045EC6-6EAF-4072-9969-AC46A32E38C8 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 41020686302 Partitions will be aligned on 2048-sector boundaries Total free space is 5062589 sectors (2.4 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 41015625727 19.1 TiB 0700 primary To me this should be working fine. I can't think of anything that would be causing this other then fundamental driver errors? I can't seem to get much/if any higher then the 361MB a second, is this hitting the "SATA2" link speed, which it shouldn't given it is a PCIe2.0 card. Or maybe some cacheing quirk - I do have Write Back enabled. Does anyone have any suggestions? Tests for me to perform? Or if you require more information, I am happy to provide it! This is a video fileserver for editing machines, so we have a preference for FAST reads over writes. I was just expected more from RAID 50 and 24 drives together... EDIT: (hdparm results) serveradmin@FILESERVER:/Volumes/MercuryInternal$ sudo hdparm -Tt /dev/sdb /dev/sdb: Timing cached reads: 17458 MB in 2.00 seconds = 8735.50 MB/sec Timing buffered disk reads: 884 MB in 3.00 seconds = 294.32 MB/sec EDIT2: (config details) Also, I am using a RAID block size of 256K. I was told a larger block size is better for larger (in my case large video) files. EDIT3: (Bonnie++ Results. Would love some guidance with this!)

  Read the article

• Cloudify: bootstrap-localcloud: operation failed?

  - by quanta

  OS: Gentoo, CentOS Version: 2.1.0 Follow the quick start guide, I got the below error when running bootstrap-localcloud: cloudify@default> bootstrap-localcloud STARTING CLOUDIFY MANAGEMENT 2012-05-30 14:55:50,396 WARNING [org.cloudifysource.shell.commands.AbstractGSCommand] - ; \ Caused by: org.cloudifysource.shell.commands.CLIException: \ Error while starting agent. \ Please make sure that another agent is not already running. Operation failed. What port Cloudify is using to check that agent is running? PS: it's working fine when running on Windows. UPDATE: Wed May 30 22:37:30 ICT 2012 Reply to @tamirkorem and @Itai Frenkel: I'm pretty sure because this is the first time I run that command on 2 servers. More clearly, here're the output: cloudify@default> teardown-localcloud Teardown will uninstall all of the deployed services. Do you want to continue [y/n]? 2012-05-30 22:43:33,145 WARNING [org.cloudifysource.shell.commands.AbstractGSCommand] - Teardown failed. Failed to fetch the currently deployed applications list. For force teardown use the -force flag. Operation failed. cloudify@default> teardown-localcloud -force Teardown will uninstall all of the deployed services. Do you want to continue [y/n]? Failed to fetch the currently deployed applications list. Continuing teardown-localcloud. .2012-05-30 22:46:39,040 WARNING [org.cloudifysource.shell.commands.AbstractGSCommand] - Teardown aborted, an agent was not found on the local machine. Operation failed. and this one is the detailed result: cloudify@default> bootstrap-localcloud --verbose NIC Address=127.0.0.1 Lookup Locators=127.0.0.1:4172 Lookup Groups=localcloud Starting agent and management processes: gs-agent.sh gsa.global.lus 0 gsa.lus 0 gsa.gsc 0 gsa.global.gsm 0 gsa.gsm_lus 1 gsa.global.esm 0 gsa.esm 1 >/dev/null 2>&1 STARTING CLOUDIFY MANAGEMENT 2012-05-30 22:36:12,870 WARNING [org.cloudifysource.shell.commands.AbstractGSCommand] - ; Caused by: org.cloudifysource.shell.commands.CLIException: Error while starting agent. Please make sure that another agent is not already running. Command executed: /usr/local/src/gigaspaces-cloudify-2.1.0-ga/bin/gs-agent.sh gsa.global.lus 0 gsa.lus 0 gsa.gsc 0 gsa.global.gsm 0 gsa.gsm_lus 1 gsa.global.esm 0 gsa.esm 1 >/dev/null 2>&1 Reply to @Eliran Malka: there is no such process listening on port 4172: # netstat --protocol=inet -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:9050 0.0.0.0:* LISTEN 2363/tor tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 2331/mysqld tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2293/cupsd

  Read the article

• Impossible to create/format install window 7 on unpartioned HD

  - by fra pet

  Hi guys i am getting nut reinstalling windows 7 on one of those Acer aspire all-in-one... The original OS(windows professional x64) was not starting, after the initial screen the bios was prompted. So step 1: i tried to access the system partition and reinstall everything but could not get at the point step 2: i set the bios to native ide and i tried to insert my original copy of windows professional and do a clean installation, but it does not allow me to format/create other partion form the installation mask step 3: my BAD, i tried to install ubuntu and i clean the whole hard drive, i was getting an error at some point during installation so i decided to get back to windows step 4: Windows 7 again, at the disk screen of the windows installation i entered into the prompt and played around with DISKPART... -i listed the disk and the HD was disk 0. -i selected disk 0. -i CLEAN disk 0 successfully. -i tried to create a CREATE PARTITION PRIMARY but gave an error cache corrupt and disk not up-to-date (after i try to create a partiton in disk 0 it disappear when i try LIST DISK and i have to restart before he can list DISK 0 again, RESCAN did not worked). -tried CLEAN ALL(2 hours) and succeeded. -try again to create primary partition and failed, same errors -try to install my old copy of windows xP pro and it seems to work, it create a partition, format(only quick worked, slow mode was at 0% after 1 hour so i stop), it start installing and around 90% installation said it could not copy a file and he stop -back on windows 7 again, it says that the hard drive has 490+gb unpartitioned but won't create a partition and format. -i tried again DISKPART as i though i messed up with the MBR when i installed ubuntu, so i did all of the instruction below http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html http://support.microsoft.com/kb/927392 the errors were: on bootsect: the systne partiton was not found, Data error cyclic redundancy check on bootrec /FixMbr: A device attached to the system is not functioning but did not worked, and still can not partiton/format/install on a blank HD i tried some bootable clean disk tool and start infinite loop on the same errors the bios setting are: sata: native ide. if i put AHCL(or something like that does not load the HD and the DVD). quick start/quite start: disabled. Are there any other option or tools i can try before i try change the HD(That is my last option)? Thanks to everyone.

  Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >