Search Results

Search found 17610 results on 705 pages for 'specific'.

Page 563/705 | < Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >

• target-action uicontrolevents

  - by Fabrizio Farinelli

  I must be missing something obvious here but ... UIControl has a method - (void)addTarget:(id)target action:(SEL)action forControlEvents: (UIControlEvents)controlEvents which lets you add an action to be called when any of the given controlEvents occur. ControlEvents are a bitmask of events which tell you if a touch went down, or up inside, or was dragged etc., there's about 16 of them, you or them together and get called when any of them occur. The selector can have one of the following signatures - (void)action - (void)action:(id)sender - (void)action:(id)sender forEvent:(UIEvent *) none of those tell you what the control event bitmask was. The UIEvent is something slightly different, it's related to the actual touch event and doesn't (I think) contain the UIControlEvent. The sender (UIControl) doesn't have a way to find the control events either. I'd like to have one method which deals with a number of control events as I have some common code regardless of which event or events happened but I still need to know what the UIControlEvents were for some specific processing. Am I missing a way to find out what UIControlEvents were used when the action was called or do I really have to separate my code into -(void)actionWithUIControlEventX; -(void)actionWithUIControlEventY;

  Read the article

• Looping through a SimpleXML object, or turning the whole thing into an array.

  - by Coffee Cup

  I'm trying to work out how to iterate though a returned SimpleXML object. I'm using a toolkit called Tarzan AWS, which connects to Amazon Web Services (SimpleDB, S3, EC2, etc). I'm specifically using SimpleDB. I can put data into the Amazon SimpleDB service, and I can get it back. I just don't know how to handle the SimpleXML object that is returned. The Tarzan AWS documentation says this: Look at the response to navigate through the headers and body of the response. Note that this is an object, not an array, and that the body is a SimpleXML object. Here's a sample of the returned SimpleXML object: [body] = SimpleXMLElement Object ( [QueryWithAttributesResult] = SimpleXMLElement Object ( [Item] = Array ( [0] = SimpleXMLElement Object ( [Name] = message12413344443260 [Attribute] = Array ( [0] = SimpleXMLElement Object ( [Name] = active [Value] = 1 ) [1] = SimpleXMLElement Object ( [Name] = user [Value] = john ) [2] = SimpleXMLElement Object ( [Name] = message [Value] = This is a message. ) [3] = SimpleXMLElement Object ( [Name] = time [Value] = 1241334444 ) [4] = SimpleXMLElement Object ( [Name] = id [Value] = 12413344443260 ) [5] = SimpleXMLElement Object ( [Name] = ip [Value] = 10.10.10.1 ) ) ) [1] = SimpleXMLElement Object ( [Name] = message12413346907303 [Attribute] = Array ( [0] = SimpleXMLElement Object ( [Name] = active [Value] = 1 ) [1] = SimpleXMLElement Object ( [Name] = user [Value] = fred ) [2] = SimpleXMLElement Object ( [Name] = message [Value] = This is another message ) [3] = SimpleXMLElement Object ( [Name] = time [Value] = 1241334690 ) [4] = SimpleXMLElement Object ( [Name] = id [Value] = 12413346907303 ) [5] = SimpleXMLElement Object ( [Name] = ip [Value] = 10.10.10.2 ) ) ) ) So what code do I need to get through each of the object items? I'd like to loop through each of them and handle it like a returned mySQL query. For example, I can query SimpleDB and then loop though the SimpleXML so I can display the results on the page. Alternatively, how do you turn the whole shebang into an array? I'm new to SimpleXML, so I apologise if my questions aren't specific enough.

  Read the article

• What is the rationale to non allow overloading of C++ conversions operator with non-member functio

  - by Vicente Botet Escriba

  C++0x has added explicit conversion operators, but they must always be defined as members of the Source class. The same applies to the assignment operator, it must be defined on the Target class. When the Source and Target classes of the needed conversion are independent of each other, neither the Source can define a conversion operator, neither the Target can define a constructor from a Source. Usually we get it by defining a specific function such as Target ConvertToTarget(Source& v); If C++0x allowed to overload conversion operator by non member functions we could for example define the conversion implicitly or explicitly between unrelated types. template < typename To, typename From operator To(const From& val); For example we could specialize the conversion from chrono::time_point to posix_time::ptime as follows template < class Clock, class Duration operator boost::posix_time::ptime( const boost::chrono::time_point& from) { using namespace boost; typedef chrono::time_point time_point_t; typedef chrono::nanoseconds duration_t; typedef duration_t::rep rep_t; rep_t d = chrono::duration_cast( from.time_since_epoch()).count(); rep_t sec = d/1000000000; rep_t nsec = d%1000000000; return posix_time::from_time_t(0)+ posix_time::seconds(static_cast(sec))+ posix_time::nanoseconds(nsec); } And use the conversion as any other conversion. So the question is: What is the rationale to non allow overloading of C++ conversions operator with non-member functions?

  Read the article

• How to I display results of phpcs in VIM?

  - by Matt

  I am presently trying to use PHP Codesniffer (PEAR) in vim for PHP Files. I have found 2 sites that give code to add into the $HOME/.vim/plugin/phpcs.vim file. I have added the code and I "think" it is working, but I cannot see the results, I only see one line at the very bottom of vim that says (1 of 32) but I cannot see any of the 32 errors. Here is my .vimrc file " Backup Options -> Some People may not want this... it generates extra files set backup " Enable Backups set backupext=.bak " Add .bak extention to modified files set patchmode=.orig " Copy original file to with .orig extention Before saving. " Set Tabs and spacing for PHP as recomended by PEAR and Zend set expandtab set shiftwidth=4 set softtabstop=4 set tabstop=4 " Set Auto-indent options set cindent set smartindent set autoindent " Show lines that exceed 80 characters match ErrorMsg '\%80v.\+' " Set Colors set background=dark " Show a status bar set ruler set laststatus=2 " Set Search options highlight, and wrap search set hls is set wrapscan " File Type detection filetype on filetype plugin on " Enable Spell Checking set spell " Enable Code Folding set foldenable set foldmethod=syntax " PHP Specific options let php_sql_query=1 " Highlight sql in php strings let php_htmlInStrings=1 " Highlight HTML in php strings let php_noShortTags=1 " Disable PHP Short Tags let php_folding=1 " Enable Ability to FOLD html Code I have tried 2 different versions of phpcs.vim, and I get the same results for both: Version 1 (found at: VIM an a PHP IDE) function! RunPhpcs() let l:filename=@% let l:phpcs_output=system('phpcs --report=csv --standard=YMC '.l:filename) " echo l:phpcs_output let l:phpcs_list=split(l:phpcs_output, "\n") unlet l:phpcs_list[0] cexpr l:phpcs_list cwindow endfunction set errorformat+=\"%f\"\\,%l\\,%c\\,%t%*[a-zA-Z]\\,\"%m\" command! Phpcs execute RunPhpcs() Version 2: (found at Integrated PHP Codesniffer in VIM ) function! RunPhpcs() let l:filename=@% let l:phpcs_output=system('phpcs --report=csv --standard=YMC '.l:filename) let l:phpcs_list=split(l:phpcs_output, "\n") unlet l:phpcs_list[0] cexpr l:phpcs_list cwindow endfunction set errorformat+="%f"\\,%l\\,%c\\,%t%*[a-zA-Z]\\,"%m" command! Phpcs execute RunPhpcs() Both of these produce identical results. phpcs is installed on my system, and I am able to generate results outside of vim. Any help would be appreciated I am just learning more about vim...

  Read the article

• WPF : Multiple views, one DataContext

  - by zapho

  Hi, I'm working on a WPF application which must handle multiple screens (two at this this time). One view can be opened on several screens and user actions must be reflected consistently on all screens. To achieve this, for a given type of view, a single DataContext is instantiated. Then, when a view is displayed on a screen, the unique DataContext is attached to it. So, one DataContext, several views (same type of view/xaml). So far so good. It works quite well in most cases. I do have a problem with a specific view which relies on ItemsControl. These ItemsControl are used to display UIElements dynamically build in the ViewModel/DataContext (C# code). These UIElements are mostly Path objects. Example : <ItemsControl ItemsSource="{Binding WindVectors}"> <ItemsControl.Template> <ControlTemplate TargetType="{x:Type ItemsControl}"> <Canvas IsItemsHost="True" /> </ControlTemplate> </ItemsControl.Template> </ItemsControl> Here, WindVectors is a ObservableCollection<UIElement>. When the view is opened the first time, everything is fine. The problem is that when the view is opened one another screen, all ItemsControl are removed from the first screen and displayed one the second screen. Other WPF components (TextBlock for instance) on this view react normally and are displayed on both screens. Any help would be greatly appreciated. Thanks. Fabrice

  Read the article

• handling DATETIME values 0000-00-00 00:00:00 in JDBC

  - by Jason S

  I get an exception (see below) if I try to do resultset.getString("add_date"); for a JDBC connection to a MySQL database containing a DATETIME value of 0000-00-00 00:00:00 (the quasi-null value for DATETIME), even though I'm just trying to get the value as string, not as an object. I got around this by doing SELECT CAST(add_date AS CHAR) as add_date which works, but seems silly... is there a better way to do this? My point is that I just want the raw DATETIME string, so I can parse it myself as is. note: here's where the 0000 comes in: (from http://dev.mysql.com/doc/refman/5.0/en/datetime.html) Illegal DATETIME, DATE, or TIMESTAMP values are converted to the “zero” value of the appropriate type ('0000-00-00 00:00:00' or '0000-00-00'). The specific exception is this one: SQLException: Cannot convert value '0000-00-00 00:00:00' from column 5 to TIMESTAMP. SQLState: S1009 VendorError: 0 java.sql.SQLException: Cannot convert value '0000-00-00 00:00:00' from column 5 to TIMESTAMP. at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1055) at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:956) at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:926) at com.mysql.jdbc.ResultSetImpl.getTimestampFromString(ResultSetImpl.java:6343) at com.mysql.jdbc.ResultSetImpl.getStringInternal(ResultSetImpl.java:5670) at com.mysql.jdbc.ResultSetImpl.getString(ResultSetImpl.java:5491) at com.mysql.jdbc.ResultSetImpl.getString(ResultSetImpl.java:5531)

  Read the article

• C#: Why am I still getting an RCW error when exiting my application?

  - by shifuimam

  To be specific, the error is: An attempt has been made to free an RCW that is in use. The RCW is in use on the active thread or another thread. Attempting to free an in-use RCW can cause corruption or data loss. The application in question is a small applet that displays the current clock speed of the CPU as a system tray icon. I'm using a System.Timers.Timer object to refresh the systray icon at an interval of 2.5 seconds. There's a single context menu item to exit the application, which uses the following function to unload everything: public void ExitApp(object sender, EventArgs e) { //stop and disable the timer theInterval.Stop(); theInterval.Enabled = false; //unload the system tray icon TheIcon.Visible = false; //exit the application Application.Exit(); } If I take out everything but Application.Exit(); I get an RCW error and the systray icon doesn't go away until I mouse over it. Everything was working perfectly until I changed the window style of the hidden form used to initialize the systray icon and the timer. If it helps any, I'm using C# 2010 Express.

  Read the article

• What's the best way to read a UDT from a database with Java?

  - by Lukas Eder

  I thought I knew everything about UDTs and JDBC until someone on SO pointed out some details of the Javadoc of java.sql.SQLInput and java.sql.SQLData JavaDoc to me. The essence of that hint was (from SQLInput): An input stream that contains a stream of values representing an instance of an SQL structured type or an SQL distinct type. This interface, used only for custom mapping, is used by the driver behind the scenes, and a programmer never directly invokes SQLInput methods. This is quite the opposite of what I am used to do (which is also used and stable in productive systems, when used with the Oracle JDBC driver): Implement SQLData and provide this implementation in a custom mapping to ResultSet.getObject(int index, Map mapping) The JDBC driver will then call-back on my custom type using the SQLData.readSQL(SQLInput stream, String typeName) method. I implement this method and read each field from the SQLInput stream. In the end, getObject() will return a correctly initialised instance of my SQLData implementation holding all data from the UDT. To me, this seems like the perfect way to implement such a custom mapping. Good reasons for going this way: I can use the standard API, instead of using vendor-specific classes such as oracle.sql.STRUCT, etc. I can generate source code from my UDTs, with appropriate getters/setters and other properties My questions: What do you think about my approach, implementing SQLData? Is it viable, even if the Javadoc states otherwise? What other ways of reading UDT's in Java do you know of? E.g. what does Spring do? what does Hibernate do? What does JPA do? What do you do? Addendum: UDT support and integration with stored procedures is one of the major features of jOOQ. jOOQ aims at hiding the more complex "JDBC facts" from client code, without hiding the underlying database architecture. If you have similar questions like the above, jOOQ might provide an answer to you.

  Read the article

• How can I setup ANT with Subversion and ColdFusion Builder (eclipse) to check out a local build to w

  - by Smooth Operator

  I am not sure if there's an answer for this already -- couldn't find one for this (hopefully common) setup: I recently converted one of my ColdFusion projects to deploy via ANT. I have a local ant script that instructs a remote server to check out the code, and run the application's specific build file, remotely on the server. I have a few endpoints: Live - production (on the production server) Staging - on the production server, different datasource, etc. dev - on the local box. What I have run into it seems is a simple and common problem. I now need ANT to create any build, even locally. Fine, created a local endpoint and it configures for my box. Issue? How do I get it to show up as a project (automatically if possible) in Eclipse/ColdFusion builder. What I envision is instead of checking out a branch via the subversion plugin in CFBuilder/Eclipse, I now use ANT to do that for me. Since I use ColdFusion Builder (Eclipse + Adobe's plugin), I have all of eclipse's tools and plugins available to solve the problem of : how can I best call ANT from within Eclipse/ColdFusion Builder, to setup the local build as a project that I can develop and work on? I think when I check the code back in from the local box, I'd have to be sure not to check in any files with local config paths, etc. I hope this is a detailed and clear enough explanation, if not, please ask. Thanks in advance!

  Read the article

• Django: Named URLs / Same Template, Different Named URL

  - by TheLizardKing

  I have a webapp that lists all of my artists, albums and songs when the appropriate link is clicked. I make extensive use of generic views (object_list/detail) and named urls but I am coming across an annoyance. I have three templates that pretty much output the exact same html that look just like this: {% extends "base.html" %} {% block content %} <div id="content"> <ul id="starts-with"> {% for starts_with in starts_with_list %} <li><a href="{% url song_list_x starts_with %}">{{ starts_with|upper }}</a></li> {% endfor %} </ul> <ul> {% for song in songs_list %} <li>{{ song.title }}</li> {% endfor %} </ul> </div> {% endblock content %} My artist and album template look pretty much the same and I'd like to combine the three template's into one. The fact that my variables start with song can easily be changed to the default obj. It's my <ul id="starts-with"> named url I don't know how to correct. Obviously I want it to link to a specific album/artist/song using the named urls in my urls.py but I don't know how to make it context aware. Any suggestions? urlpatterns = patterns('tlkmusic.apps.tlkmusic_base.views', # (r'^$', index), url(r'^artists/$', artist_list, name='artist_list'), url(r'^artists/(?P<starts_with>\w)/$', artist_list, name='artist_list_x'), url(r'^artist/(?P<artist_id>\d+)/$', artist_detail, name='artist_detail'), url(r'^albums/$', album_list, name='album_list'), url(r'^albums/(?P<starts_with>\w)/$', album_list, name='album_list_x'), url(r'^songs/$', song_list, name='song_list'), url(r'^songs/(?P<starts_with>\w)/$', song_list, name='song_list_x'), )

  Read the article

• Is it possible to update old database from dbml file ? (C#, .Net 4, Linq, SQL Server)

  - by Emil

  Hi all, I began recently a new job, a very interesting project (C#,.Net 4, Linq, VS 2010 and SQL Server). And immediately I got a very exciting challenge: I must implement either a new tool or integrate the logic when program start, or whatever, but what must happen is the following: the customers have previous application and database (full with their specific data). Now a new version is ready and the customer gets the update. In the mean time we made some modification on DB (new table, columns, maybe an old column deleted, or whatever). I’m pretty new in Linq and also SQL databases and my first solution can be: I check the applications/databases version and implement all the changes step by step comparing all tables, columns, keys, constrains, etc. (all this new information I have in my dbml and the old I asked from the existing DB). And I’ll do this each time the version changed. But somehow I feel, this is NOT a smart solution so I look for a general solution of this problem. Is there a way to update customers DB from the dbml file? To create a new one is not a problem (CreateDatabase with DataContext), is there any update/alter database methods? I guess I’m not the only one who search for such a solution (I found nothing in internet – or I looked for bad keywords). How did you solve this problem? I look also for an external tool, but first for a solution with C#, Linq or something similar. For any idea thank you in advance! Best regards, Emil

  Read the article

• PHPUnit and autoloaders: Determining whether code is running in test-scope?

  - by pinkgothic

  Premise I know that writing code to act differently when a test is run is hilariously bad practise, but I may've actually come across a scenario in which it may be necessary. Specifically, I'm trying to test a very specific wrapper for HTML Purifier in the Zend framework - a View Helper, to be exact. The HTML Purifier autoloader is necessary because it uses a different logic to the autoloaders we otherwise have. Problem require()-ing the autoloader at the top of my View Helper class, gives me the following in test-scope: HTML Purifier autoloader registrar is not compatible with non-static object methods due to PHP Bug #44144; Please do not use HTMLPurifier.autoload.php (or any file that includes this file); instead, place the code: spl_autoload_register(array('HTMLPurifier_Bootstrap', 'autoload')) after your own autoloaders. Replacing the require() with spl_autoload_register(array('HTMLPurifier_Bootstrap', 'autoload')) as advertised means the test runs fine, but the View Helper dies a terrible death claiming: Zend_Log[3707]: ErrorController caught LogicException "Passed array does not specify an existing static method (class 'HTMLPurifier_Bootstrap' not found)" (Our test folder structure is slightly different to our Zend folder structure by necessity.) Question(s) After tinkering with it, I'm thinking I'll need to pick an autoloader-loading depending on whether things are in the test scope or not. Do I have another option to include HTMLPurifier's autoloading routine in both cases that I'm not seeing due to tunnel vision? If not, do I have to find a means to differentiate between test-environment and production-environment this with my own code (e.g. APPLICATION_ENV) - or does PHPUnit support this godawful hackery of mine natively by setting a constant that I could check whether its been defined(), or similar shenanigans? (My Google-fu here is weak! I'm probably just doing it wrong.)

  Read the article

• Problem with JMX query of Coherence node MBeans visible in JConsole

  - by Quinn Taylor

  I'm using JMX to build a custom tool for monitoring remote Coherence clusters at work. I'm able to connect just fine and query MBeans directly, and I've acquired nearly all the information I need. However, I've run into a snag when trying to query MBeans for specific caches within a cluster, which is where I can find stats about total number of gets/puts, average time for each, etc. The MBeans I'm trying to access programatically are visible when I connect to the remote process using JConsole, and have names like this: Coherence:type=Cache,service=SequenceQueue,name=SEQ%GENERATOR,nodeId=1,tier=back It would make it more flexible if I can dynamically grab all type=Cache MBeans for a particular node ID without specifying all the caches. I'm trying to query them like this: QueryExp specifiedNodeId = Query.eq(Query.attr("nodeId"), Query.value(nodeId)); QueryExp typeIsCache = Query.eq(Query.attr("type"), Query.value("Cache")); QueryExp cacheNodes = Query.and(specifiedNodeId, typeIsCache); ObjectName coherence = new ObjectName("Coherence:*"); Set<ObjectName> cacheMBeans = mBeanServer.queryMBeans(coherence, cacheNodes); However, regardless of whether I use queryMBeans() or queryNames(), the query returns a Set containing... ...0 objects if I pass the arguments shown above ...0 objects if I pass null for the first argument ...all MBeans in the Coherence:* domain (112) if I pass null for the second argument ...every single MBean (128) if I pass null for both arguments The first two results are the unexpected ones, and suggest a problem in the QueryExp I'm passing, but I can't figure out what the problem is. I even tried just passing typeIsCache or specifiedNodeId for the second parameter (with either coherence or null as the first parameter) and I always get 0 results. I'm pretty green with JMX — any insight on what the problem is? (FYI, the monitoring tool will be run on Java 5, so things like JMX 2.0 won't help me at this point.)

  Read the article

• What does it mean that "Lisp can be written in itself?"

  - by Mason Wheeler

  Paul Graham wrote that "The unusual thing about Lisp-- in fact, the defining quality of Lisp-- is that it can be written in itself." But that doesn't seem the least bit unusual or definitive to me. ISTM that a programming language is defined by two things: Its compiler or interpreter, which defines the syntax and the semantics for the language by fiat, and its standard library, which defines to a large degree the idioms and techniques that skilled users will use when writing code in the language. With a few specific exceptions, (the non-C# members of the .NET family, for example,) most languages' standard libraries are written in that language for two very good reasons: because it will share the same set of syntactical definitions, function calling conventions, and the general "look and feel" of the language, and because the people who are likely to write a standard library for a programming language are its users, and particularly its designer(s). So there's nothing unique there; that's pretty standard. And again, there's nothing unique or unusual about a language's compiler being written in itself. C compilers are written in C. Pascal compilers are written in Pascal. Mono's C# compiler is written in C#. Heck, even some scripting languages have implementations "written in itself". So what does it mean that Lisp is unusual in being written in itself?

  Read the article

• Extension Methods and Application Code

  - by Mystagogue

  I have seen plenty of online guidelines for authoring extension methods, usually along these lines: 1) Avoid authoring extension methods when practical - prefer other approaches first (e.g. regular static methods). 2) Don't author extension methods to extend code you own or currently develop. Instead, author them to extend 3rd party or BCL code. But I have the impression that a couple more guidelines are either implied or advisable. What does the community think of these two additional guidelines: A) Prefer to author extension methods to contain generic functionality rather than application-specific logic. (This seems to follow from guideline #2 above) B) An extension method should be sizeable enough to justify itself (preferably at least 5 lines of code in length). Item (B) is intended to discourage a develoer from writing dozens of extension methods (totalling X lines of code) to refactor or replace what originally was already about X lines of inline code. Perhaps item (B) is badly qualified, or even misinformed about how a one line extension method is actually powerful and justified. I'm curious to know. But if item (B) is somehow dismissed by the community, I must admist I'm still particularly interested in feedback on guideline (A).

  Read the article

• Navigating to nodes using xpath in flat structure

  - by James Berry

  I have an xml file in a flat structure. We do not control the format of this xml file, just have to deal with it. I've renamed the fields because they are highly domain specific and don't really make any difference to the problem. <attribute name="Title">Book A</attribute> <attribute name="Code">1</attribute> <attribute name="Author"> <value>James Berry</value> <value>John Smith</value> </attribute> <attribute name="Title">Book B</attribute> <attribute name="Code">2</attribute> <attribute name="Title">Book C</attribute> <attribute name="Code">3</attribute> <attribute name="Author"> <value>James Berry</value> </attribute> Key things to note: the file is not particularly hierarchical. Books are delimited by an occurance of an attribute element with name='Title'. But the name='Author' attribute node is optional. Is there a simple xpath statement I can use to find the authors of book 'n'? It is easy to identify the title of book 'n', but the authors value is optional. And you can't just take the following author because in the case of book 2, this would give the author for book 3. I have written a state machine to parse this as a series of elements, but I can't help thinking there would have been a way to directly get the results that I want.

  Read the article

• Get current PHP executable from within script?

  - by benizi

  I want to run a PHP cli program from within PHP cli. On some machines where this will run, both php4 and php5 are installed. If I run the outer program as php5 outer.php I want the inner script to be run with the same php version. In Perl, I would use $^X to get the perl executable. It appears there's no such variable in PHP? Right now, I'm using $_SERVER['_'], because bash (and zsh) set the environment variable $_ to the last-run program. But, I'd rather not rely on a shell-specific idiom. UPDATE: Version differences are but one problem. If PHP isn't in PATH, for example, or isn't the first version found in PATH, the suggestions to find the version information won't help. Additionally, csh and variants appear to not set the $_ environment variable for their processes, so the workaround isn't applicable there. UPDATE 2: I was using $_SERVER['_'], until I discovered that it doesn't do the right thing under xargs (which makes sense... zsh sets it to the command it ran, which is xargs, not php5, and xargs doesn't change the variable). Falling back to using: $version = explode('.', phpversion()); $phpcli = "php{$version[0]}";

  Read the article

• Clarification needed: How does .NET runtime resolve assembly references from parent folder?

  - by aoven

  I have the following output structure of executables in my solution: %ProgramFiles% | +-[MyAppName] | +-[Client] | | | +-(EXE & several DLL assemblies) | +-[Common] | | | +-[Schema Assemblies] | | | | | +-(several DLL assemblies) | | | +-(several DLL assemblies) | +-[Server] | +-(EXE & several DLL assemblies) Each project in solution references different DLL assemblies, some of which are outputs from other projects in solution, and others are plain 3rd-party assemblies. For example, [Client] EXE might reference an assembly in [Common], which is in a different directory branch. All references have "Copy Local" set to false, to mirror the layout of the files in the final installed application. Now, if I take a look at reference properties in the Visual Studio IDE, I see that "Path" of every reference is absolute and that it corresponds to the actual output location of the assembly. That's understandable and correct. As expected, solution compiles and runs just fine. What I don't understand is, why everything seems to work even when I close the IDE, rename the [MyAppName] directory and run the [Client] EXE manually? How does the runtime find the assemblies if the reference paths aren't the same as they were at the time of linking? To be clear - this is actually exactly what I'm after: a semi-dispersed set of application files that run fine regardless of where the [MyAppName] directory is located or even what it's named. I'd just like to know, how and why this works without any specific path resolution on my part. I've read the answers to this similar question, but I still don't get it. Help much appreciated!

  Read the article

• Is there a disassembler + debugger for java (ala OllyDbg / SoftICE for assembler)?

  - by Ran Biron

  Is there a utility similar to OllyDbg / SoftICE for java? I.e. execute class (from jar / with class path) and, without source code, show the disassembly of the intermediate code with ability to step through / step over / search for references / edit specific intermediate code in memory / apply edit to file... If not, is it even possible to write something like this (assuming we're willing to live without hotspot for the debug duration)? Edit: I'm not talking about JAD or JD or Cavaj. These are fine decompilers, but I don't want a decompiler for several reasons, most notable is that their output is incorrect (at best, sometimes just plain wrong). I'm not looking for a magical "compiled bytes to java code" - I want to see the actual bytes that are about to be executed. Also, I'd like the ability to change those bytes (just like in an assembly debugger) and, hopefully, write the changed part back to the class file. Edit2: I know javap exists - but it does only one way (and without any sort of analysis). Example (code taken from the vmspec documentation): From java code, we use "javac" to compile this: void setIt(int value) { i = value; } int getIt() { return i; } to a java .class file. Using javap -c I can get this output: Method void setIt(int) 0 aload_0 1 iload_1 2 putfield #4 5 return Method int getIt() 0 aload_0 1 getfield #4 4 ireturn This is OK for the disassembly part (not really good without analysis - "field #4 is Example.i"), but I can't find the two other "tools": A debugger that goes over the instructions themselves (with stack, memory dumps, etc), allowing me to examine the actual code and environment. A way to reverse the process - edit the disassembled code and recreate the .class file (with the edited code).

  Read the article

• How to recursive rake? -- or suitable alternatives

  - by TerryP

  I want my projects top level Rakefile to build things using rakefiles deeper in the tree; i.e. the top level rakefile says how to build the project (big picture) and the lower level ones build a specific module (local picture). There is of course a shared set of configuration for the minute details of doing that whenever it can be shared between tasks: so it is mostly about keeping the descriptions of what needs building, as close to the sources being built. E.g. /Source/Module/code.foo and cie should be built using the instructions in /Source/Module/Rakefile; and /Rakefile understands the dependencies between modules. I don't care if it uses multiple rake processes (ala recursive make), or just creates separate build environments. Either way it should be self-containable enough to be processed by a queue: so that non-dependent modules could be built simultaneously. The problem is, how the heck do you actually do something like that with Rake!? I haven't been able to find anything meaningful on the Internet, nor in the documentation. I tried creating a new Rake::Application object and setting it up, but whatever methods I try invoking, only exceptions or "Don't know how to build task ':default'" errors get thrown. (Yes, all rakefiles have a :default). Obviously one could just execute 'rake' in a sub directory for a :modulename task, but that would ditch the options given to the top level; e.g. think of $(MAKE) and $(MAKEFLAGS). Anyone have a clue on how to properly do something like a recursive rake?

  Read the article

• Generating All Permutations of Character Combinations when # of arrays and length of each array are

  - by Jay

  Hi everyone, I'm not sure how to ask my question in a succinct way, so I'll start with examples and expand from there. I am working with VBA, but I think this problem is non language specific and would only require a bright mind that can provide a pseudo code framework. Thanks in advance for the help! Example: I have 3 Character Arrays Like So: Arr_1 = [X,Y,Z] Arr_2 = [A,B] Arr_3 = [1,2,3,4] I would like to generate ALL possible permutations of the character arrays like so: XA1 XA2 XA3 XA4 XB1 XB2 XB3 XB4 YA1 YA2 . . . ZB3 ZB4 This can be easily solved using 3 while loops or for loops. My question is how do I solve for this if the # of arrays is unknown and the length of each array is unknown? So as an example with 4 character arrays: Arr_1 = [X,Y,Z] Arr_2 = [A,B] Arr_3 = [1,2,3,4] Arr_4 = [a,b] I would need to generate: XA1a XA1b XA2a XA2b XA3a XA3b XA4a XA4b . . . ZB4a ZB4b So the Generalized Example would be: Arr_1 = [...] Arr_2 = [...] Arr_3 = [...] . . . Arr_x = [...] Is there a way to structure a function that will generate an unknown number of loops and loop through the length of each array to generate the permutations? Or maybe there's a better way to think about the problem? Thanks Everyone!

  Read the article

• .NET - A way to add my own clipboard format to existing formats

  - by A9S6

  I have a Excel addin that displays some structures on the worksheet. Users can copy the structures and paste them in another worksheet or another application which is handled by the Clipboard formats. When a user copies the structure, I convert the structure into a specific format and put it on the clipboard using the DataObject::SetData(). Please note that when a copy is initiated in Excel, it puts a number of formats on the clipboard (see image). The problem is that there is a third party application that depends on the data on the clipboard(Copy from Excel and paste into this 3rd party app) but the funny thing is that I am not sure which format it depends on. I need to preserve the existing formats that Excel has put up there and also add my own format to it. Currently when I use the Clipboard class in .NET (taking the DataObject and calling SetData inside it), all the other formats are replaced by new ones. I then tried to create a new DataObject, copy the existing format data to this data object and then set this data object in the Clipboard. This works fine but it takes time to copy the data. // Copying existing data in clipboard to our new DataObject IDataObject existingDataObject = Clipboard.GetDataObject(); DataObject dataObject = new DataObject(); string[] existingFormats = existingDataObject.GetFormats(); foreach (string existingFormat in existingFormats) dataObject.SetData(existingFormat, existingDataObject.GetData(existingFormat)); I am looking for a solution to just access the existing DataObject and quietly add my own data to it without affecting other formats. Excel Clipboard Formats - (Ignore the Native Format)

  Read the article

• keyup bindings not working in Firefox

  - by Jarred

  Hi. You can see my project here - http://www.inluxphoto.com/custom/jsgallery/index.php I am attempting to make the left and right arrow keys move the slideshow. I was able to get it to work in all browsers by following exactly the instructions on the front page of jqueryfordesigners.com (sorry I am only allowed one link). However, it is necessary that the keyup be unbinded until the animation completes, so the user cannot do a quick double tap of the key, which breaks the show. This led me to the following function - function keyCommands() { //Bind Keys according to keyAssignments function keyCommandBind() { $(document.documentElement).bind('keyup', keyAssignments) } //Bind functions to specific keys function keyAssignments() { if (event.keyCode == 37) { leftArrow(); } if (event.keyCode == 39) { rightArrow(); } if (event.keyCode == 32) { spaceBar(); } } function leftArrow() { //unbind, do stuff, rebind } function rightArrow() { //unbind, do stuff, rebind } function spaceBar() { //unbind, do stuff, rebind } keyCommandBind(); } This works in all browsers except Firefox & Camino. Firebug tells me event (ie event.keyCode) is not defined. That's true, it's not defined, and I understand that. However I don't understand why, if it's not defined, does it work in all other browsers. How can I appropriately define this? Or, am I doing it wrong? Any help would be most appreciated, thanks for your time!

  Read the article

• handling java exception

  - by Noona

  This questions is related to java exception, why are there some cases that when an exception thrown the program exits even though the exception was caught and there was no exit() statement? my code looks something like this void bindProxySocket(DefaultHttpClientConnection proxyConnection, String hostName, HttpParams params) { if (!proxyConnection.isOpen()) { Socket socket = null; try { socket = new Socket(hostName, 80); } catch (UnknownHostException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } try { proxyConnection.bind(socket, params); } catch(IOException e) { System.err.println ("couldn't bind socket"); e.printStackTrace(); } } } and then I call this method like this: bindProxySocket(proxyConn, hostName, params1); but, the program exits, although I want to handle the exception by doing something else, can it be because I didn't enclose the method call within a try catch clause? what happens if I catch the exception again even though it's already in the method? and what should I do if i want to clean resources only if an exception occurs and otherwise I want to continue with the program? I am guessing in this case I have to include the whole piece of code until I can clean the resources with in a try statement or can I do it in the handle exception statement? some of these questions are on this specific case, but I would like to get a thorough answer to all my questions for future reference. thanks

  Read the article

• using style in WPF

  - by Polaris

  In my application I use ShinyBlue.xaml resourse Dictionary which has this code for GroupBox control: <Style TargetType="{x:Type GroupBox}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type GroupBox}"> <Grid SnapsToDevicePixels="true"> <Grid.ColumnDefinitions> <ColumnDefinition Width="6" /> <ColumnDefinition Width="Auto" /> <ColumnDefinition Width="*" /> <ColumnDefinition Width="6" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="Auto" /> <RowDefinition Height="Auto" /> <RowDefinition Height="*" /> <RowDefinition Height="6" /> </Grid.RowDefinitions> <Border Grid.ColumnSpan="4" Grid.RowSpan="4" Background="{DynamicResource LightBrush}" CornerRadius="4,4,4,4" BorderThickness="1,1,1,1" /> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> These style common for all app. But in one of the forms I want to change background to Transparent. I want override only Background Property but it's not work <Style TargetType="GroupBox" BasedOn="{StaticResource {x:Type GroupBox}}"> <Setter Property="Background" Value="Transparent"/> </Style> code above not works properly How can I change GroupBox Background in specific form ?.

  Read the article

< Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >