Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 565/761 | < Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >

• where do i find the drivers for a F5D7000 Belkin wireless adapter?

  - by neubert

  So I plugged an F5D7000 Belkin desktop wireless adapter into my desktop. Here is a picture of it: I did a Google search and found the drivers. I installed the latest version - (F5D7000 - Driver - Version 8xxx), and the NIC is still unrecognized as per the next screenshot: Does anyone have any ideas on how to get this working? I'm running Windows XP SP3 32-bit. (I have taken a screenshot but without network connectivity I can't email it or post it anywhere and I don't have a USB stick.)

  Read the article

• How do I get detailed information about what happens during logon

  - by Funky Si

  Due to my IT department leaving I am now responsible for all our IT systems. I now have several problems to get my head around and fix. I run Active Directory on windows server 2003 and use group policy to apply settings etc. Recently we have had some windows 7 clients added to our network, these are having awful problems with our logon scripts and drive mappings. For the most part my XP clients are working without a problem. What I want to know is what is going on during logon, as running the logon scripts after I have logged on often works. Does anyone know of a way to get detailed log information of what is happening before and during logon. Thanks for your help and any suggestions you have for tracking down the source of these problems.

  Read the article

• Bootable and remote controllable imaging software?

  - by stefan.at.wpf

  I am looking for an imaging software, that one can boot from CD or usb stick (therefore without installing anything on the system!) and then control by some kind of remote desktop. So something like a combination of Acronis TrueImage's Bootable Media and Windows Remote Desktop. I don't even need to be able to store the backup on a network drive, as an external usb hdd is attached for these purposes. Background: A system that is normally controlled by SSH / command line and therefore has no keyboard/mouse connected that I could use to control Acronis TrueImage.

  Read the article

• Replacing sick NTP server source and re-synching (with internal time currently 2 minutes late)

  - by l0c0b0x

  One of the external NTP servers (the primary one--currently) we're using as source seems to not be responding to NTP calls. Unfortunately, on our core router (Cisco 6509), the NTP functionality hasn't switched to the secondary NTP external server as it was expected. As a result, our core router which is pretty much our main internal NTP source is 2 minutes late. I'm planning to fix the external router issue by making the external NTP source be the one currently working. I'm wondering, how much will a 2 minute change affect my users and services? Specially since these days, we're heavily relying on certificate-based authentication. We're a Windows/Cisco shop. Internal NTP setup: [Core Router 1 / Cisco 6509]: looking out to two external NTP servers (in which the primary one is not responding to NTP calls) [Core Router 2]: Synching with Core router 1 (primary), working external router (secondary) [Other Cisco network devices]: Synching with Core router 1 (primary), core router 2 (secondary) [Domain controller(s)]: Synching with Core router 1 [All windows clients/servers]: Synching with domain controllers

  Read the article

• Suggestions for a Self-serv advertising service

  - by Mystere Man

  I am seeking a self-serv advertising service for my websites, but I have a few restrictions that seem to make what i'm looking for hard to find. Specifically, I want to place "advertise here" links on my pages and allow end-users to purchase advertising on that site, page, and location. These ads will not be part of a national network. Supports multi-tenancy - That is, I have a number of domains using the same "web application" but with customized content per domain. When a customer wants to advertise on a given domain, then the ads will only appear on that domain and on that page of the domain (even though the page name may be the same across multiple domains). Supports fixed ad prices, not just CPC. I need monthly and quarterly pricing regardless of performance. Integrates with OpenX and other ad networks, so that if there is no self-serv on a given zone, it will use national advertising or direct advertising. Shiny Ads has much of this, but i'm looking for alternatives, as their prices are a bit crazy (20%) and can only do PayPal.

  Read the article

• Laptops trying to connect via wireless? Only able to connect only via wired connection

  - by Chris J. Lee

  It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

  Read the article

• How do I turn a shared computer back into a shared media drive?

  - by Brian Green

  There is an external hard drive that is set up as a shared media device for a TV. I tried to hook up my the library on my desktop as a shared media drive to watch movies from my computer on the TV. It worked for a little bit but about 5 seconds after getting into my computer the tv went blank and I couldn't access the external hard drive any more. When I checked on my computer the Hard drive was no longer a shared media device but now it was a computer on the network. How do I fix this and turn it back into a shared media device so I can access it on the TV?

  Read the article

• VMware - Watching multiple virtual machine screens

  - by mr.b

  Hi, I don't know even if I put the question right, but here's what I'd like to accomplish. I have avoided specifying exact Vmware virtualization product here because I'm not sure which one would be most suitable for the task at hand. I am developing an application that works in local network. This application has to run on several computers at the same time, and it's important to me, as a developer and tester, to see (literally) how it behaves at all times on all computers. Is there any way to connect to screens of virtual machines deployed on ESX, ESXi, Sever 2.0, or some other product, so that I can see something like grid of screens, say 4x4 or 6x4 or whatever number of scaled screens, at the same time? Ability to interact with screens directly from grid (by double-clicking a screen, for instance, and then getting full resolution screen) would be greatly appreciated, of course. I hope that someone understood what I meant here. :)

  Read the article

• What can be done against language inertia?

  - by gerrit

  Often, projects use programming language X, but would use programming language Y if they were started from scratch. For example, big numerical models may be written entirely in Fortran. Whereas this might be a reasonable choice for the components that need to run fast (alternative would be C or C++), it might be a poor choice for components that either do not need to run fast (such as things dealing with human input or simple visualisations), or where runtime is not the limiting factor (such as I/O, particularly when from the network). Another example may be when a project is built using a propriety language (such as Matlab; no, FOSS clones are not good enough) and was started at a time when FOSS alternatives were not viable, but ten years later, they are; and it would be beneficial to migrate. However, due to language inertia, a migration does not happen. Code that works should not be touched, porting code is a time-consuming, expensive process, and programmers are familiar in language X but not necessarily in language Y. Still, in the long term, a migration would likely be beneficial. Can anything be done to mitigate the problems associated with language inertia? Are there any notable examples of big projects that have successfully overcome this problem? Or is a project bound to stick forever with the initial choices?

  Read the article

• Concerns about a Dedicated (Windows Server 2008) + DDoS

  - by TheKillerDev

  I am have today a dedicated server with these specs: Intel Core i5 750, 2x120GB (ssd + raid), Windows Server 2008 Web, 200Mbps Network, 24 Gb DD3 And I would like to know what are the best thing I can do to prevent a DDoS Attack, since I know this will be a real threat by the importance of the files that will be archived in it. Today I have apache listening port 80 and RDC listening port 3389. But the security is beeing made only by Windows Firewall. So, any thoughts on what would be good to prevent from DDoS attacks?

  Read the article

• Eventlog entry for allowed connection in Windows Firewall

  - by Jaap

  I was seeing a lot of entries in the eventlog: The Windows Filtering Platform has permitted a connection. Application Information: Process ID: 4 Application Name: System Network Information: Direction: Inbound Source Address: 10.xxx.xxx.xxx Source Port: 80 Destination Address: 10.xxx.xxx.xxx Destination Port: 31773 Protocol: 6 Filter Information: Filter Run-Time ID: 67903 Layer Name: Receive/Accept Layer Run-Time ID: 44 We have a loadbalancer which checks every second to see if the application is still running (a health check). The logs contain large amounts of this kind of entries, which makes the Event Viewer slow and it's difficult to find the more interesting logs. How do I make sure these messages don't end up in the event logs?

  Read the article

• Active Directory remote versus local computer logon

  - by Jake

  Hi, Hope some one can help a network/server noob understand how domains work in AD. I am in an organisation with 2 AD servers in 2 different countries, e.g. US and UK, and they set up the US and UK domains respectively. the accounts are set up such that all employees in both countries have a US\user and UK\user account. What is the difference if a UK user logon with US\user from a local UK computer, versus RDP (remote desktop) into a US server with US\user? Thanks for your help.

  Read the article

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

• How do ISPs/Colocation Facilities limit bandwidth for Ethernet Drops?

  - by Kyle Brandt

  I have switch providers and have run into some problems with bandwidth limitations. I have more bandwidth then before, but there are performance issues. The router is connected to a 100mBit port, but they limit it to arbitrary settings (in software I imagine). It seems when I go above the limit, the provider starts to drop packets beyond the limit (This is what they said they do as well). Is it possible the previous provider did something like queuing packets above the this limit before dropping them? Is anyone aware of not only what can be done, but what is typical? Also, is there anything I can do on my Cisco router to help this situation? It would seem I am pretty helpless if the packets are dropped before they reach my interface (The traffic that is high is inbound to my network).

  Read the article

• How to build an outbound load balancer with linux?

  - by matnagel

  We have a small house in the countryside and there is no fixed broadband, so we had a mobile flatrate first, and for 2 people with 2 computers it was too slow, so now we have 2 flatrates for 2 client machines. So I pay 2 flatrates and have double bandwith theoretically. There is a local network in the house that connects everything. But when I am alone I wonder how I can use both connections at the same time. I want to build a solution where I can browse the web and page requests are spread between the 2 connections. I imagine there are expensive routers who can split the traffic between 2 lines. But is there a good way to do it with linux? The solution I am looking for will split the requests already for one page (multiple images, css files, javascrfipt files) between the two lines.

  Read the article

• How to understand computer science as a whole?

  - by MrCellophane

  I am a college student in Computer Science, I have been studying CS for a long time. But even till today, I still feel so confused about a lot of things. First of all, I have solid foundation in alg, data structure, and OOP, but I don't have a clear understanding of the whole system of the subject. I studied database, alg, data structure, OOP, network, software engineering, OS, and a lot of courses. I know what they are, but I don't know how to connect them together. Is there a way to have a clear understanding of the architecture of the subject? And is there a way to know what technology is used to do what? For example, in interviews, when people ask me alg, data str, Java, OS or any other specific field, I could answer, but when they ask some other very general about the field, I have no idea. Well, I know my question maybe a little bit confusing, but what my situation is I don't even know how to ask a clear question. I don't know my question, it's totally a mess in my head. Is there a way to make it clear?

  Read the article

• DB auto failover in c# does not work when the principal server physically goes offline

  - by user62521

  I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

  Read the article

• Why do I have two different DNS suffix lists?

  - by Rob Kennedy

  My Windows XP laptop has two different DNS suffix lists. The first is the one I see by selecting the Properties dialog of any of my network connections, selecting Internet Protocol Properties Advanced DNS tab, and looking at the list under the "Append these DNS suffixes (in order)" option. The second list is the one shown under "DNS Suffix Search List" when I run ipconfig /all. As far as I can tell, only the second list ever gets used to resolve unqualified host names. Why are there two different lists? How do I configure the second list? Or how can I make my computer use the first list?

  Read the article

• Seamlessly Authenticate with a Secondary Active Directory Server (when primary is down)

  - by LonnieBest

  How do you get workstations to (seamlessly) authenticate with a secondary Active Directory server when the primary one is down? Background: I added a secondary Active Directory server to a company's network, hoping that it would do authentication in the event that the primary Active Directory server was down. Although, the Secondary Active Directory server seems to be replicating correctly, authentication doesn't occur while rebooting the primary Active Directory server. Do I have a misunderstanding regarding the role of a secondary Active Directory server, or are there additional settings I must set to get the workstations to authenticate with it when the primary is down?

  Read the article

• Workflow: suggest a versioning and file control for Designer and Developer

  - by Pennf0lio

  Our company are having hard time managing project files and managing versions of PSD, HTML, PHP, and CSS files. Can anyone recommend a good software or workflow to handle files and versions. Here's my common scenario: I work for a project in my computer, it could be a Website mockup or a coding project. I then save all the files locally in my workstation. I'll then upload all the project files in the server connected in our network to have a backup. In my files, I usually append a "r1" for revisions, like "WebsiteMockup_r1" or "WebsiteMockup_r2". I need somehow to synchronize all my local files to the server and have some versions options.

  Read the article

• impossible to connect.. days trying..

  - by dany

  I have a problem: I am on Debian. I configured my nic with a static ip (192.168.1.56). When I try to connect to a network, initially with ifconfig eth2 I get (correctly): eth2 inet addr:192.168.1.56 .... inet6 addr: fe80:221:ff:fe96:4598/64 but after a few seconds the 102.168.1.56 disappears and after some other seconds disappears the inet6 address too. When I press in the nm-applet it requires me the password but in the meantime it try to connect. At uni, the connection is a DHCP one. It works for the first few seconds but after it doesn't. Any possible solution? Here it is the relevant part of the syslog: (static ip configuration) http://pastebin.com/u3BPAsda

  Read the article

• How to tell if you are connected to Wireless B, G or N?

  - by Raheel Khan

  I am using Windows 7 on all wired desktops and wireless laptops in my home network. I recently upgraded my Ethernet switch to Gigabit and instantly noticed an increase in throughput in wired devices. I also bought a Wireless-N WAP but with degredation in wireless file transfer speeds. I have been told that a number of reasons could affect wireless speeds including which WAP is used, how many wireless devices are connected, which security mode is used, etc. However, that remains irrelevant to my question. Each of my laptops claim to support Wireless-N but I cannot seem to figure out how to determine if the laptops are truly running Wireless-N or are connected to the WAP through some sort of mixed-mode. I do not have control of the WAP device so cannot tell what mode it is running in. Is there a way to tell which mode is being used and what the throughput is for each connected device without having access to the WAP interface?

  Read the article

• What are the IPv6 Public and Private and Reserved ranges

  - by vipin raj

  I just want to know what are all the public IPv6 ranges which ISPs or other users can use? Also need a list of addresses which can be used in private networks and also the list of addresses which never can be used in any network. I have been searching through different web sites. But none gives a reliable answer. Actually we are developing an application which allows user to plan their IP address(create supernets, subnets, hosts, assign host to ports etc). So my application should be able to distinguish between all kinds of address ranges, whether it is reserved, public, private, multicast etc

  Read the article

• Getting "Unable to find a medium containing a live file system" when installing 10.10

  - by Krastin Konstantinov

  I got this error while trying to install ubuntu 10.10 from a bootable USB stick on to Sony Vaio P series laptop. The disk boots into the language and installation type screen. After that it goes through the splash and pulls up this error: BusyBox v1.13.3 (Ubuntu 1:1.13.3-ubuntu11) built in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Unable to find a medium containing a live file system After getting this error the installation fails to start. I have used the same USB stick on some other laptops and the installation started as usual. Any help will be appreciated. My installation is i386 and my machine is Vaio P VGN-P610. I've tried every possible thing: Bios: [enable boot external] Boot order: [external] [hard drive] [network boot] Tried 2 different USB drives Tried 2 different external CD drives Tried 6 different downloads of both the desktop and netbook remix. All downloads were checked with MD5SUM. Ubuntu Desktop 9.10 installs properly in every version and from every source. Getting reaaaally frustrated.

  Read the article

• A design for watching IPTV anywhere in the house?

  - by Carlos

  I'm currently getting TV and internet via IP to my house. The service comes into an ISP-supplied Router (ST585) which is in turn connected to an IPTV box. I need to replace the router, as it's port forwarding seems to be broken, so I was thinking of getting a box with an IGMP proxy. I once mistakenly got a non-IGMP box, with the result that the internet worked, but the IPTV didn't. The trouble is, I have no idea how to set up the IPTV part of the installation. I do have a copy of the ST585 configuration, but it doesn't look anything like the Cisco stuff that I learned about at CCNA. What are the steps necessary to reproduce the IGMP setup? I was thinking of WireSharking the communications on the network, but I suppose I'd need a hub for that? As a bonus, since the packets are coming in with the TV signal, is it possible to mess with the IGMP setup so I can watch TV anywhere in the house?

  Read the article

< Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >