Search Results

Search found 89335 results on 3574 pages for 'server restart'.

Page 567/3574 | < Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574  | Next Page >

• Connecting to my SMTP server

  - by Joseph Silvashy

  I have a few questions, I just installed SMTP on my Ubuntu server, and I want to know how to connect to it from a different machine... I'm not really clear. I tried: telnet my.servers.ip.address 25 I think it's running on port 25, but I don't know where to find out, its not in the conf file anywhere. Additionally do I need it to be a FDQN? or can I just access my mail server via it's IP address? I know that the service works on the machine because I'm able to echo test | mail -s "test" [email protected] Any help debugging or understanding this would be helpful, thanks guys!

  Read the article

• Can't access to access to my web server inside a network with Firewall on

  - by ianenri

  I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

  Read the article

• Redirecting http to https (iis 7)

  - by Simon

  Our server redirects http://ourdomain.com/anything to http://ourdomain.com Is is possible to get it to redirect and retain the anything part? ie. http://ourdomain.com/cat/dog to https://ourdomain.com/cat/dog

  Read the article

• Exchange Server 2003 Drive Error

  - by Saif Khan

  My exchange box went offline this AM. The logs show The device, \Device\Harddisk1, has a bad block. I tried running chkdsk D: /x /r but that didn't help either. I went to the Exchange Manager and tried to move the .stm file from D: to C: but got Exchange System Manager The database files in this store are corrupted. ID no: c104173b Exchange System Manager What else is there to try just to get this online for a few hours until I can get onsite to change the drive. This is a Windows Server 2003 server.

  Read the article

• How to duplicate a backup set from one media server to another

  - by MathematicalOrchid

  I really honestly can't figure out how to do this. It's easy enough to open Backup Exec and tell it to duplicate the data on one local device onto another local device. What I cannot figure out how to do is make it duplicate data from one local device to a remote device. I can connect to the remote BE server, but then I can only access the remove devices. I can connect to the local BE server, but then I can only access the local devices. I can't figure out how the heck to get access to both local and remove devices simultaneously. Symantec Backup Exec 12.5 for Windows, in case it matters.

  Read the article

• Allow private access to Git on shared hosting server

  - by Akahadaka

  I've setup my own VM running Ubuntu 10.04, LAMP and ISPConfig 3. I would also like to add Git, and give access to to closed group of developers working on their own private projects, essentially operating it as a shared hosting production server. Before I go installing software on the server gung-ho, I would like to know; a) Is this possible? b) Is it a good idea? (How else could one achieve a shared but private environment?) c) Is the installation of Git any different in this situation?

  Read the article

• Simplest vpn server for linux

  - by Ian R.

  I'm supposed to setup a vpn server on our linux machine for some of our employees who travel a lot. I have 10 ip's on that server so I'm looking into a simple software (not openvpn which is a hell to digest). The software should be able to allow connections from any os type (linux, mac, windows). It should also be able to allow connections via username/password. I would like to assign 1 ip to each client. Any ideas, names?

  Read the article

• My VPS ubuntu server is very slow

  - by askmike

  I just installed a frech copy of Ubuntu 12.04 on my vps because my old installation was very slow, unfortunately this did not fix the problem. With slow I mean requests for my PHP websites take a long time, very slow (30 sec per request) to slow (3+ sec per request). When it's really bad SSH is also laggish. The websites are: askmike.org (pretty standard Wordpress) mvr.me (own PHP) slow? very slow: Here is a picture of loading a clean install of wordpress slow: here is a picture of loading a small PHP based website the vps The VPS has 256mb ram and an 25GB hdd. Besides serving the 2 small websites it isn't doing anything AFAIK. What have I installed Clean Ubuntu server 12.04 LAMP stack few things like git and nodejs (not using both) ossec (because I thought my server was getting hammered) munin What I already tried / done I installed munin so that I could watch io speed and such. The problem is that I don't know where to look for in the munin report. I checked logs and don't see anything strange (although I don't really know where to look for besides strange / repetitive errors and GET requests). I configured Apache MPM to: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 40 MaxRequestsPerChild 0 </IfModule> (apache is using prefork, the default) Stats I copied the munin report as it appeared at 4:50 last night to a site hosted on a shared webhost. Note that tonight my mysql crashed somewhere after 1:00 (which is a new problem altogether), so therefor the graph for last night might look strange. Can anyone help me get my VPS up to normal speed? EDIT: Thanks for the replies. The VPS is 10 bucks a month and is from directvps.nl (Dutch host and I'm also dutch). I did two speed tests for disk IO: $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 23.1506 s, 46.4 MB/s $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 39.3796 s, 27.3 MB/s Anyway: how can I prove to my VPS host that it is to slow? I can understand a server being busy slowing a website down. But 5-30 sec loadtime for a normal PHP webpage?

  Read the article

• Best Server Ghost-Like Tool For Windows

  - by John Dibling

  I'm looking for advice on which tool we should use to clone servers. In the short term, we will be cloning identical hardware but in the long run we may want to create one image and replicate that on a different class of machine. For example, as new servers are released from Dell, we will want to continue to use the same image we already made. Right now our servers are Windows (Server 2008 & Server 2008 R2), but moving forward we may need Linux support as well. Ghost Solution Suite 2.5 seems to be the canonical tool. Are there alternatives? Recommendations/reviews?

  Read the article

• Win2003 R2 - 1.5TB disks not identified

  - by JohnyD

  I just installed 4 1.5TB hard disks (WD) in two servers (2 in each). Upon reboot they are not showing up in the disk manager whatsoever. I'm running Windows Server 2003 EE (32bit) with 8GB ram. They both currently have mirrored 300GB sata disks. Why aren't they being recognized? Is there a disk size limit for win2k3 r2?

  Read the article

• How can I get a notification from my server if the mail queue stops

  - by Ash

  I am using QMail with Plesk 10 on an Apache server. Occasionally the mail queue stops processing emails - this most recently happenend when an email account got hacked and started sending hundreds of emails. We did not find out about this until a client of ours contacted to say that their emails were not being recieved, so we checked the mail queue and lo and behold the service had stopped. In future I would like to be notified when the mailqueue stops. How can I set something up so the server will run a command whenever the mailqueue stops?

  Read the article

• What happens when a snapshot is deleted

  - by Ralph Shillington

  I have a tree of snapshots taken about once an hour as I progressed through a rather tricky server setup. Now that I'm done, I would like to get rid of the snapshots, but I gather that these are actually differencing drives. If that's the case, does it not mean that deleting a snapshot will in fact revert me back to a previous point in time. Or does it mean that deleting a snapshot merges the changed bits into the parent VHD.

  Read the article

• Iozone: sensible settings for a server with lots of RAM

  - by Frank Brenner

  I have just acquired a server with: 2x quadcore Xeons 48G ECC RAM 5x 160GB SSDs on an LSI 9260-8i Before deploying the target platform, I'd like to collect as much benchmark data as possible, testing I/O with hardware RAID in various configurations, ZFS zRAID, as well as I/O performance on vSphere and with KVM virtualization. In order to see real disk I/O performance without cache effects, I tried running Iozone with a maximum file of more than twice the physical RAM as recommended in the documentation, so: iozone -a -g100G However, as one might expect, this takes far too long to be practicable. (I stopped the run after seven hours..) I'd like to reduce the range of record and file sizes to values that might reflect realistic performance for an application server, hopefully getting the run times to under an hour or so. Any ideas? Thanks.

  Read the article

• Need to reformat SQL Cluster Disk. How do I recover my SQL installation?

  - by I.T. Support

  We need to reformat the SQL cluster disk in our SQL cluster. The drive contains the shared installation files for SQL as well as databases. My concern is how SQL/The Cluster will react to after we wipe the disk resource. Questions: Is there a defined procedure for this? How should we backup and restore the disk? After the reformat, how do we get the clustered SQL server back online? Thanks

  Read the article

• Know the number of pages printed from cups printing

  - by Gatura

  I am using the CUPS print server on a MAC to manage printing, I would like to know the number of pages that are printed by any user for any job, however the column for pages writes unknown for each printing job. How can I go about this

  Read the article

• SQL Server: How to report error from a job's step of PowerShell type

  - by Ariel

  I have a SQL job whose step of 'PowerShell' type does 'exit 1' if encounters an error i.e. $ErrorActionPreference='stop'; trap{"$_"; exit 1} Problem is, SQL Server doesn't pay attention to that exit code, and reports "The step did not generate any output. Process Exit Code 0. The step succeeded." Any idea how to successfully tell SQL Server from a PowerShell step that something went wrong? Thanks in advance.

  Read the article

• Hosting a JEE application on my own server with custom domain

  - by Joro Seksa

  I have a website which purpose is to help people build routes and use various map tools. The site is all static with lots of javascript source files which do the logic. However i want to convert this site to a JEE application and host it on my own server with tomcat container. So lets say that the application hosted on my server can be accessed on address: xxx.xxx.xxx.xxx:8084/MyApp Now lets say my domain is www.my-domain.com The question is: Is it possible to be made when i enter www.my-domain.com in the browser to load automatically xxx.xxx.xxx.xxx:8084/MyApp

  Read the article

• Wamp server won't run [closed]

  - by Alegro

  win xp sp3 I installed wamp 2.2 and after starting it was allways orrange and offline. Clicking on "Put Online" I got the error: wampserver aestan tray menu - could not execute menu item (internal error)... Somewhere I found the advice to change httpd.conf file (Listen 80 - to Listen 8080) Now, mouseover try icon shows that server is online, but it is still orrange, and click on localhost shows: Firefox can't establish a connection to the server at localhost. Skype is not running and inside Skype options "Use port 80 and 443 as alternatives for incoming connections" is unchecked. A couple of months ago I was able to run wamp normaly. Could someone help, pls.

  Read the article

• Multi domain server with dedicated SSL's HA

  - by user3692800

  I am hosting a server with 150 domain names (websites), each of the ssl's requere dedicated IP address. So server windows 2008, with 150 IP addressees and 150 websites. I need to have high availability solution. So thinking setting up AWS but ELB will not be a solution... and max IP's I can get per instance is 12 addresses. So what can I do to have all 150 sites hosted on one instance and be HA with instance in different availability zone.

  Read the article

• SQL Transactional Replication snapshot not applying

  - by dmch2

  Hi, I'm using SQL Transactional Replication with pull subscriptions to replicate databases (hosting their own distribution database) from several servers across a VPN to a central server. I've got the first 2 databases working fine but the 3rd one is causing me problems. My subscription server is SQL 2008, the source systems are all SQL 2005. The source databases are a few 100Mb in size and contain audit data so are simply growing slowly by adding new records at approx 1kb a second. As far as the replication monitor, Agent logs and event logs show everything is working fine - except that no data appears in my subscription database. The distribution agent doesn't seem to want to read the snapshot (and hence the initial state and schema) from the publisher. New transactions aren't applied although they do seem to be arriving OK as the replication monitor shows things like '5 transactions with 10 commands were delivered'. I would expect (as in previous times) to see statements about data being BCPed in the replication monitor. The snapshot is on the publisher on a shared folder. The subscriber can view the snapshot OK (\\repldata) and the alt snapshot folder is pointing at it. But the distribution agent doesn't seem to be making an attempt to do read it. I tried changing the snapshot path to something that's incorrect and didn't even get an error saying that it couldn't access it. After lots of googling etc I found that sp_MSget_repl_commands is called by the subscriber on the distribution database on the publisher. Running a profiler I can see that it's only called for one agent Id. After a reinit it's called for sequence number 0x0 as expected so I thought that would mean it's would look for the snapshot. However, looking on the publisher I see that there's data for two agents - the snapshot agent and the log reader agent (which is being queries). So I guess I need to tell the distribution agent to get the data for both. But how? and more importantly - why? It worked fine on the other two servers I've replicated. I'm not an SQL novice but this is pretty much my first go at replication so don't be afraid to accuse me of missing something obvious/stupid! I can get log files (eg from the distribution agent) if you want but they don't seem to have any errors in them - it just starts up and starts applying log reader agent changes. Cheers Dave

  Read the article

• How to increase the number of vmware.log files?

  - by 27b6

  Hi all, Is there any way to increase the number of vmware.log files for a given VM (Vmware Server 1.0.4, host: SLES 10)? Problem is, that one of our VMs crashes every now and then, and I can only see the four log files vmware.log, vmware-0.log, vmware-1.log and vmware-2.log each of which contains records starting after the crash when trying to boot. So I have no information of what happened before the crash. Thanks, Ingo

  Read the article

• What is the best powershell script to restore an SQL Database?

  - by EtienneT

  To restore an SQL Server 2008 database, I would lile to be able to just do something like this in powershell: ./restore.ps1 DatabaseName.bak Then the powershell script would by convention restore it to a database with name "DatabaseName". It would disconnect any user connected to this database so that it can restore the DB. It would store the mdf and ldf in the default location. This would mainly be while developing on my personal machine. Just a quick way to restore a DB. Anyone has such a script? Thanks

  Read the article

• Java application not starting in Tomcat, Plesk 9 server

  - by netagence

  Hi I have a Plesk 9.3 CentOS 5 server on which I installed the addon to have Tomcat functions. One application I have uploaded appears in the Plesk Tomcat user panel but with a yellow exclamation mark and the error "Actual status of the application does not correspond to the status retrieved from the database". The app therefore does not run, while other uploaded test .war applications do. The server runs Tomcat tomcat5.5.23-0jpp.7.el5_2.1 which matches the requirements for the required app according the the company that made it. While searching for the solution I could find all 3 uploaded .war applications in /usr/share/tomcat5/psa-wars/domainhere.com/ but they do not seem uncompressed there even though 2 of them run fine. Not enough Tomcat / Java knowlede to go on... Any idea to help me here ? Best regards.

  Read the article

• Multiple SQL Standard Instances on 4 Processor/32-core Server

  - by Theowood

  We have a large 4 processor/32-core server with 192GB of memory available in the data center and over twenty small SQL Standard databases to consolidate. They are a mix of SQL 2012 and 2008 R2 for 3rd-party apps. Is there any issue with simply installing two instances of SQL Standard on the server - one for 2012 and one for 2008 R2 ? Each instance will use up to 64GB out of the 192GB and 16 cores. If we did this with Enterprise, the licensing would be a fortune and the Enterprise features are not needed.

  Read the article

• Exchange server listening on port 25 but clients dont recieve emails

  - by Josh R

  My exchange server is listening on port 25, that is I can telnet into it and send an email but Outlook 2010/2007, OWA, and ActiveSync are not pulling down emails. Outlook 2010 specifically says Connected To Exchange Server and Updating Inbox but it never updates the inbox. Also, OWA shows some of the newer mail messages, but when I double click on one to open it up in OWA, it times out. Any idea what could be causing this? Also Exchange Transport and Information Store are started. Thanks!

  Read the article

< Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574  | Next Page >