Search Results

Search found 46079 results on 1844 pages for 'super mario'.

Page 567/1844 | < Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574  | Next Page >

  • Command prompt hangs/freezes/crashes sporadically

    - by Leonard Challis
    I'm finding it very difficult to Google this, I don't seem to be able to find anyone with the same issue and I don't know enough about the Windows operating system to troubleshoot. The machine(s) we are seeing the problem on are Windows 7 (professional) both 64bit and 32bit. The problem is with the command prompt freezing up, seemingly randomly. When it does freeze nothing will bring it back to life (i.e. keypress) and it's nothing to do with Quick Insert mode either. It doesn't seem to be when I run standard commands, such as cd, dir, etc, but when I run different programs from the command line. The annoying thing is that sometimes the prompt will freeze and at other times it won't, using the same program/command in the prompt. To add to the frustration, one of my colleagues who had the same problem seems to not have experienced it for a few days now (we're pretty heavy on the command line). It's not a VPN/RDP thing as suggested in other questions and forum posts, as I've seen this both locally and remotely. I thought it was to do with the return code signifying an error or some error state in the program, i.e.: C:\Users\leonardc>mysql -u lalala ERROR 1045 (28000): Access denied for user 'lalala'@'localhost' (using password: NO) but this isn't always the case either. In fact the above command hasn't crashed the shell before. Elevating the prompt to run as Administrator doesn't seem to have any bearing on the problem either. Disabling my anti-virus doesn't have an effect either. Update: I tried the same commands in PowerShell, but I still get the same problem, it will freeze at random times (more often than not, as with the command prompt, but not always). It's not the same as command prompt in the fact that one might work while the other doesn't, but then the next time I try run the same command in both it will suddenly be different again.

    Read the article

  • Bash command to focus a specific window.

    - by D Connors
    Is there a way, in bash command line, to give focus to a specific window of a running process. Assume I know the process' name, number, and anything else I need. For instance, if I have a single instance of Firefox running, but it's minimized (or there's some other window on top of it). I need a bash command that brings up and gives focus to the Firefox window, by making it the active window. Thanks

    Read the article

  • Xubuntu 9.10 LiveCD on USB fails with error can't open /dev/sr0: no medium found

    - by EricJLN
    Using Ubuntu's USB Startup Disk Creator (usb-creator-gtk), I created a LiveUSB from the Xubuntu 9.10 LiveCD. When booting, it stalls up with the Xubuntu mouse splash screen displayed. In attempting to troubleshoot, I used Ctrl-Alt-F1 to check out the first virtual terminal. On that screen, I see over and over again the lines: stdin: I/O error stdin: error 0 /init: line 1: can't open /dev/sr0: No medium found

    Read the article

  • Windows Vista - Can Boot into Safe Mode Command Prompt, Cannot Access Flash Drive

    - by Adam
    Hey there, Got a laptop dropped into my lap. Has Vista installed. Normal boot never gets past the login screen. Safe mode will get past, but just barely. I can try and start the task manager at that point, but it never opens. Only reliable way to do anything I've got is the safe mode command prompt... Boots up and logs in fine. I can't see anything noticably wrong via regedit, but it's been a long time since I've had to fix up a Windows box... not sure that I would. Problem I'm having, is that I want to run ComboFix/etc, but have no way to get them on there... When I pop a flash drive in, it seems to mount it (flash drive flickers as normal) but it never seems to be mounted... I cannot access it through any drive letter on the command line. I managed to start the device manager (devmgmt.msc) and the flash drive was recognized and listed... Any ideas on how to get this thing going again? (Short of a reinstall.) (It has no CD drive, either, so burning files to CD would not be easy...) Thanks! Adam

    Read the article

  • How to format HDD with MHDD Tool.

    - by PP
    I have copied MHDD application on a bootable CD and i wan to use it to low level format my HDD which had some bad sectors on it. so how can mark these badsecotrs using MHDD application? Pluse can i partition/format my HDD using MHDD because after low level format i want to setup window xp on that drive. can some one explain me step by step procedure to how to lovel format driven and partition/format it and then setup xp on that. Link to MHDD app. http://hddguru.com/content/en/software/2005.10.02-MHDD/ Thanks, PP.

    Read the article

  • Links not opening in Windows 8 applications

    - by Martin Brown
    I have just upgraded my laptop from Windows 7 Ultimate with IE9 to Windows 8 with IE 10. When ever I try to open a web link in an application nothing happens. For example in the Windows 8 mail application it makes the email address in an email look like a link. When I click on these with the mouse the link changes to look like I have clicked on it, but aside from that nothing happens. I have tried making sure that IE 10 is my default web browser and been into IE10's settings and associated it with all the usual file types, but still no success. Has anyone got any ideas what might be causing this? I have a feeling this started when the Browser Choice update ran. I couldn't select which browser to install in that either. The install buttons just flashed when I clicked them and then nothing. PS I would have added an IE10 tag to this post, but apparently I don't have the reputation required to do so.

    Read the article

  • Is the 4pin atx power plug required?

    - by rockinthesixstring
    I know the answer is probably a resounding YES, but I just wanted to double check. I just purchased a new chassis for my PC and now my 4pin cpu power plug doesn't reach. I'm wondering if the 4 pins are required for operation, or can I get by for the weekend without it until I can go get an extension?

    Read the article

  • Media file segmenter like tool for linux

    - by Raja
    Hello everyone I'm looking for a tool for linux which can segment a video file into multiple small .ts files. I know one for Mac OS X called media file segmenter which is a simple command line tool. I really appreciate if anyone can point me to an equivalent linux tool. I don't know if these types of non-programming questions are allowed on this site. my apologies for that.

    Read the article

  • problem in installing google gears in firefox ubuntu

    - by piemesons
    "Google Gears" could not be installed because it is not compatible with your Firefox build type (Linux_x86-gcc3). Please contact the author of this item about the problem. This is the error i am getting while installing google gears in my firefox in ubuntu. Can anybody help me. I tried default user agent addon still its not working.

    Read the article

  • TightVNC (or any VNC) viewer windows scaling

    - by mr.b
    Hi, I am currently using TightVNC to connect to multiple remote hosts in LAN. I start 16 VNC viewers, set Scaling by: Auto (in connection options display), and then select all viewer windows and use Tile Horizontally, which covers my entire screen with VNC viewers. It all works sort of nice, except that desktop interaction is really slow when there are more then 4 VNC viewers. My question is, does VNC client (not just TightVNC, but any compatible client) support some kind of smart scaling option, so that client tells server something along the lines of: "Okay, I'm displaying your entire screen in a window size 300x225 px, so can you please start sending encoded images on that resolution?", at which point interactiveness of open connections dramatically increase, and when I decide to go full screen on some connection, client and server re-negotiate and server starts sending full resolution images again? Thanks!!

    Read the article

  • cisco ePC 3208 router and captive portal

    - by Dejan Milosevic
    Ok, i have cisco ePC 3208 router, and cable internet goes in router via cable and router is emiting wireless. It can work without computer and it is working fine. Now i want to have capiteve portal with home page for my buisness and user logins. Is it possible that i use computer as gateway for captive portal, so when user goes to wireless it will redirected to computer local server for authorization and then passed by if user and pass is good, or i need another router or wifi acess point?

    Read the article

  • How to remove file association in windows 8?

    - by Chesnokov Yuriy
    I have Chrome associated with .xlsx file on windows 8.1 machine In Control Panel\Programs\Default Programs\Set Associations it is not possible to remove association only to change it to another program. In Control Panel\Programs\Default Programs\Set Default Programs\Set Program Associations , .xlsx is not present in Chrome. I removed all keys from HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.xlsx Still Chrome remains associated with that extension in Control Panel\Programs\Default Programs\Set Associations, Windows Explorer shows the Chrome icon with the .xlsx file.

    Read the article

  • Rendering Machine Configuration [closed]

    - by user1184598
    I would like to buy a computer for Rendering purpose. The Rendering is based on DirectX in Windows 7. It needed to support multi-thread rendering which is highly demanding (around 20 threads doing rendering and connection to MS SQL Server job simultaneously). Could I have some suggestion on the configuration of the computer? e.g. what kind of CPU, GPU, Mother Board should be used? The budget is around US$1000. Thank you very much.

    Read the article

  • PC powers off at random times

    - by Timo Huovinen
    Short Version After experiencing some problems with Mobo batteries my PC started to power off at random times, the power off is instant and sudden and does not restart afterwards, need help figuring out the cause. Facts: Powers off when PC is playing games Powers off when PC is idle Powers off when PC is in safe mode Powers off when PC is in BIOS Powers off when PC is booted through a Windows installation USB Replaced the motherboard battery several times Replaced the 650W PSU with a 750W PSU Replaced the RAM Swapped the RAM between slots Re-applied thermal paste to the CPU Checked if the motherboard touches the case Nothing is overclocked PC Specs PC specs: OS: Windows 7 Ultimate SP1 RAM: klingston 1333MHz 4GB stick CPU: AMD Phenom II x4 955 Mobo: Gigabyte 88GMA-UD2H rev 2.2 Motherboard battery: CR2032 3v HDD: 500GB Seagate ST3500418AS ATA Device Graphics: ATI/AMD Radeon HD 6870 Very Long version Around 10 months ago I built a brand new gaming PC. Around 6 months ago it's time setting in windows started resetting to the year 2010. I swapped the Motherboard battery for a new one of the exact same size and shape and voltage, and the problems disappeared...for around 2 weeks. Then the same problem happened again, time gets reset, I swapped the battery again, and the problem was gone for good and everything was great for about 3 months.. then another problem started happening, the PC started to power off suddenly and without warning at completely random times, sometimes the PC works for and hour, sometimes 5 minutes. So I read on the forums that it might be either the PSU or the motherboard Battery or RAM or HDD or the Graphics card or the CPU or the motherboard or the drivers or a Virus or Grounding issues, or something short circuiting, basically it can be anything... I spent some days researching, and decided to remove the possibility of a virus. I reset the CMOS, cleared all BIOS settings and reinstalled windows 7 after a full format of the HDD, but the random power off kept happening. I then disabled the restart on error option in windows and looked at the event log for error events, but they did not help me figure out the problem. Network list service depends on network location awareness the dependency group failed to start Source Kernel Power Event 41 Task Category 63 Source Disk Event ID 11 Task Category None The driver detected a controller error on device disk I took apart the PC, every little piece, re-applied some expensive thermal paste to the CPU, and double checked that none of the pieces are touching the PC case. The problem was gone, the PC no longer powered off randomly I re-attached the graphics card and all was good for 4 months... then the power off problem appeared again, but was happening at high intervals, the PC would shutdown once in 2 days on average, at random points in time, sometimes when it's idle all day long, sometimes when it's running CRYSIS 2. I checked the CPU temperature, because I know that AMD CPU's have a built in protection mechanism that switches off the PC if the CPU gets too hot, and the Temp was 50C system temp, and 45C CPU after running the PC all day long (I did not do tests to see if there are any temperature spikes, don't know how to do them) Originally the PSU that powered the PC was 650Watts and had one 4 pin cable to power the CPU, I replaced it with a new 750Watts PSU which has two 4 pin cables for the CPU, but the problem remained. I removed the graphics card and let the motherboard use the built in one, but the PC kept suddenly powering off at random times. I took apart the PC completely again, and re-applied thermal paste to the CPU, added lots of insulation, and checked for any type of short-circuit possibility again and again, but the problem remained. The problem was like that for some months. I replaced the Battery a couple of times over the time, changed lots of options in windows, and tried everything I could, but it kept powering off, so I stopped using the PC as much as I used to, just living with the random power offs from time to time, until a couple of days ago, when the power off happens almost immediately after powering on the PC. I replaced the RAM with a brand new one, but that did not help. Took apart the PC again, checked for anything anywhere that might cause it, found some small scratches on the very edge of the motherboard to the left of the PCI express x16 slot. This might cause the problem, I thought, but the scratch looks very superficial, not deep at all, and if the scratch did harm the motherboard, wouldn't it cause it to not start at all? And why did it start to power off a while ago, and then suddenly stop powering off? The scratches could not have vanished??? did chkdsk \d but it powered off when it was at 75% I removed the hard disks, the graphics card, while I fiddled with the BIOS settings, and suddenly the PC shut down while I was looking at the BIOS version. This makes me realize, it is not caused by: HDD, Windows, Drivers or the Graphics card I cleared the CMOS again, updated the BIOS from F5 to F6f beta, but that did not help, it might even seem that the PC powers off even sooner. The shutdown even happened to me while I booted through a windows 7 installation USB and was in the repair console. I removed one of the cables powering the CPU, now only one 4pin cable powers it, and it worked for 30mins after doing that, which makes me think that it's the CPU overheating, and because it gets less power, it overheats slower? The things that I am still considering: CPU overheating (does not seem to overheat, maybe false readings?) Motherboard short circuiting (faulty motherboard?) I desperately need some advice in what is faulty, is it a faulty Motherboard or an overheating CPU? or maybe something else? I have been breaking my head over this problem over a span of 6 months. I'm not sure if this is a good place to ask this question, if it is not, then tell me where I can get some experienced help. More info I have also discovered a mysterious piece that seems to have fallen out of the motherboard i119.photobucket.com/albums/o126/yurikolovsky/strangepiece.jpg What is it? Looks like each time that it powers off the datetime gets reset I also found another forum post tomshardware.co.uk/forum/… except I don't have Integrated PeripheralsUSB Keyboard Function option in BIOS :S Comments summary (asked by Random moderator) Q. tell me, if the computer restarts, is it immediately? Does it take a second and then restarts? Do you see (BSOD) or hear (PSU, short circuit) any suspicious when it happens? After reading trough it, it remains the mainboard that is faulty. – JohannesM A. Immediate power off, all the fans stop instantly, all the light turn off instantly, no sound or anything, and it remains off until I turn it back on. Thanks for the feedback, faulty motherboard is what I fear. Q. Try stress-testing the system with Prime95 and see if errors or shutdowns occur when the CPU is under full load. – speakr A. Prime95 heat stress test peaked CPU heat at 60C after 5mins, it powered off after 30mins of testing in the middle of the test with no errors, Prime95 Heat test or the stress-testing with low RAM usage (small or in-place FFTs) do not report errors while testing for 10-60 mins. The power off does not seem like it is affected by Prime95 at all Makes me wonder if it's a CPU or Motherboard issue at all. Q. I had similar random/intermittent problems with my old board. It gave one of a few different symptoms: keyboard and/or mouse would die and/or the RAM wouldn't work and/or it would shut down. It was in bad shape. One problems was that my old PSU had literally burned the connector on it (browned around the pins), another was that a broken lead inside the layers of the PCB would work sometimes if it happened to be hot or if I bent the board—by jamming a hunk of wood behind it. I managed to keep the board alive for several years, but eventually nothing I did would make it work correctly anymore. – Synetech A. I will try that as the last resort, ok? ;) Q. Have you tried a different power cord, surge protector, outlet (on a different circuit). It's worth a shot just to ensure it's not subpar wiring or a week circuit (dips in power may cause shutdown if the PSU can't pull enough juice from the wall). – Kyle A. yes, I attached the PC to an entirely different outlet on a different circuit and the problem persists. After connecting it to a different outlet after starting the PC it gave me 3 long beeps and 1 short one, then the PC immediately proceeded to boot up normally. Q. Re-check your mainboard manual and all PSU connections to your mainboard to be sure that nothing is missing (e.g. 12V ATX 4-pin/6-pin connector). If you can provoke shutdowns with Prime95, then consider buying new hardware -- a stable system should run Prime95 for 24h without any errors. Prime95 mentions errors in the log when they occur and gives a summary after the stress test was stopped manually (e.g. "0 errors, 0 warnings", if all is fine) – speakr A. Re-checked, there are no more PSU connectors that I can physically connect, except the one ATX 4-pin (there are 2 that power the CPU) that I disconnected on purpose, I have reconnected it but the problem persists. Q. With one PC I had a short curcuit. The power button on the front plate had its cables soldered, but not isolated, and the contacts were very close to the metal case. A heavier touch was enough to cause a shutdown. The PC's vibration could be enough – ott-- A. yes, it seems to switch off with even the lightest touch, I switched on the PC, then pulled out the front panel power cable that connects to the motherboard so the power button does not work anymore, after 5 mins of working like that, with the power button completely disconnected, just sitting idle, the PC powered off again, I don't think it's the power button. Q. I wonder if you dare to operate components without the case, that is remove motherboard, power, disk ( just put the motherboard on a wooden desk). Don't bend the adapters when running like that. – ott-- A. yes, I do dare to do that, but only tomorrow, too tired/late right now.

    Read the article

  • Metacity toggle fullscreen not working under Lucid; worked with Karmic.

    - by Andy
    Hi all, I'm working on a 11" screen, so I frequently want to use applications in fullscreen. I'm no expert on GNOME, but I remember doing a search a while back, and finding out about metacity, and how to use that to allow any window to be put in fullscreen. This worked great on Karmic, but it doesn't seem to be working under Lucid. Here's what I do. Run gconf-editor. Go to /apps/metacity/window_keybindings. Change toggle_fullscreen from disabled to <Control><Shift>F. Unfortunately it doesn't work. I know that I've got the right syntax because I can see other shortcuts and use them as a template. I have no idea what's wrong, and no idea how to move forwards/debug. Any suggestions much appreciated. TIA Andy

    Read the article

  • How to write to a Mac OSX read-only filesystem?

    - by marienbad
    I have DMG I need to mount and write a file to. When I mount it, finder shows the root and all as read-only. Then I discovered 'mount -w'. But when I run that, I get 'mount: unknown special file or file system.' How can I mount this disk image as writable, or force a file into it?

    Read the article

  • Few questions on bittorrent

    - by user23950
    Details Torrent Client: Bit lord Is it possible to continue torrent downloads on other computer? I'm at about 38% of the 8Gb file that I'm downloading. And then my isp suddenly dropped my speed from 90-100kbps into 40-48kbps(Maybe because I'm really producing lots of traffic with the 8 hrs/day downloading) If its possible what do I need to do in order for the downloads to be continued on other computer

    Read the article

  • Windows Explorer slow to open networked computer, fast to navigate once opened

    - by Scott Noyes
    I open Windows Explorer and enter an IP for a computer on my home network (\\192.168.1.101). It takes 30 seconds or more to present a list of the shared folders. It does not appear to be an initial handshaking/authentication thing; even if I allow the view to load and then immediately load the same again, it is always slow. Once they appear, navigating through folders and opening files is fast. Also, navigating directly to a folder (\\192.168.1.101\My Music) is fast, even if it's the first connection since a restart. Using \\computerName instead of the IP address gives exactly the same results. Pings return in 1ms. net view \\computerName (or \ipAddress) returns the list of shared folders fast. This makes me suspect an Explorer issue rather than a network issue. Suspecting that the remote computer was being automatically indexed or something, I went into Tools-Folder Options-View and unchecked "Automatically search for network folders and printers," but that made no difference. De-selecting the "Folders" icon near the address bar makes no difference. Adding the IP address and computer name to the hosts file makes no difference. Both computers involved are laptops running Windows XP. Both have WiFi and cable adapters. Mine is not connected via cable. The result is the same whether the target is plugged in to the cable or not (although the IP address changes - 192.168.1.101 over cable, 192.168.1.103 over WiFi.) We are using DHCP assigned by the router.

    Read the article

  • Office 2007 Error: The installation of this package failed.

    - by ktrauberman
    I just ran a clean install of windows 7 this morning, installed all the latest updates, and I'm now trying to install Office Ultimate 2007 that I purchased last year from the Office Ultimate Steal. It was running fine under windows xp, but when I try to run the installer in windows 7, I get an error message that says: The installation of this package failed I have tried the following: Running the installer as administrator Running the installer under windows xp (SP3) compatability Mode Re downloading the installer (I have it saved to my dropbox account, I can't redownload it from Microsoft) Any help that you can provide would be great!

    Read the article

< Previous Page | 563 564 565 566 567 568 569 570 571 572 573 574  | Next Page >