Search Results

Search found 8656 results on 347 pages for 'boot to vhd'.

Page 57/347 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • Disk boot failure, insert system disk and press Enter.

    - by torbengb
    Similar to this related question, I came home and found that my media center pc showed this message, Disk boot failure, insert system disk and press Enter Before I do anything with the (defective?) harddisk, what are the best first steps I can take to fix this with a minimum of damage? Normally the machine (Win Vista) is always on and never reboots by itself (Windows auto-updates are disabled too). Something must have caused it to reboot, though I'm sure we didn't have a power outage. The machine can't reboot on that disk, but it will boot on another disk I just plugged in for testing. I haven't changed anything, or even touched the machine, for several days, and it has been running fine until now. I did replace the power supply some weeks ago, because the old one suddenly stopped working. It has been working fine with the replacement PSU.

    Read the article

  • Black Screen on boot on a Lenovo IdeaPad Z575

    - by Davis
    So I tried to install Wubi. On boot, when I select Ubuntu it starts then I get a purple screen then black screen. My monitor is like completely off. So then I have to hold down my power button and shut it off. I boot it up then held shift and typed in "nomodeset" after the second to last line, but then when it boot it went into the command prompt thing and just stopped after "checking battery" or something. This is my first time installing any linux distro. I want to install it alongside windows and dual boot it with wubi because that is easy and simple. This is the laptop I have: http://www.newegg.com/Product/Product.aspx?Item=N82E16834246328

    Read the article

  • Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time

    - by aceinthehole
    If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

    Read the article

  • Ubuntu 12.04 Install - Black Screen - No Grub - Have run Boot Repair Disk

    - by Pat
    Day 4 of my purgatory. History: Had problems with live CD at first, had to set the "nomodeset" option ... and then it worked fine. Installed Ubuntu "Alongside" Windows XP from live CD (NOT wubi) Upon reboot after installation, I get the BIOS ... and then a black screen. If I hit shift after the BIOS screen I get text that says "loading GRUB ..", but then no GRUB ... just a black screen. What I have tried to do: Total re-installation ... 3 times now. Also tried with wubi, same black screen. Have gone back to the normal (non-wubi) install. After installation, I tried re-booting the live cd ... and trying to change GRUB file using: sudo gedit /etc/default/grub ... to "nomodeset" and "timeout=10" ... but won't let me save my changes because I'm using the live cd "in memory" system and don't have permissions to the disks (I think). I tried logging in ... but it won't let me. I then read many posts on this site. I'm stuck. This morning, I ran the "boot repair disk". Results here: http://paste.ubuntu.com/1132333/ What I think is wrong: Since I can get the live CD to run (perfectly) with the "nomodeset" option, I think all I need to do is get to GRUB to change that ... but I can't get to GRUB. Appreciate any advice. Pat Day 5 ... I downloaded "Super Grub 2 Disk" from: http://www.supergrubdisk.org/super-grub2-disk/ This looks promising. I can boot the disk and it brings me to a GRUB program that allows me to: 1) Boot to Windows ... which works 2) Boot to Ubuntu ... which does NOT work When I choose boot to Ubuntu, I get lines across the screen which is an obvious video card problem. Likely because I need to set the "nomodeset" option. So, I attempted to use super grub2 to edit the grub file ... but it is TOTALLY different than the Ubuntu grub file ... and I don't know where to put the "nomodeset" option. Still stuck ... The bottom line is that: 1) I need to edit /etc/default/grub on sda(1) ... which is my boot drive ... to add the "nomodeset" option 2) To do that I need to get into grub ... but, I can't. Holding down shift just echo's "loading grub .." and then takes me to a black screen 3) I can boot to the live CD by setting nomodeset .... but I cannot access the hard disk as root ... I can't save my changes! Can anyone tell me how to login as root for the filesystem from the live CD ... so I can edit the grub file on the HARD DISK ... and then run update-grub??

    Read the article

  • Install Ubuntu 13.10 in dual boot with Windows 8.1

    - by Xaxt
    I have a laptop with installed Windows 8.1 x64. I want to intstall Ubuntu 13.10 (x64 of cause) in dual boot with it. I've made bootable USB stick (using unetbootin) with Ubuntu and tried to boot with it. It boots fine, and allows me to choose language and asks whether I want to install Ubuntu or just boot it. But if I select any ot these options, it shows black screen and hangs. I've been waiting about 15 minutes for it, but nothing happened. Light of USB stick indicates that my laptop was not trying to read from it that time. I switched off EFI in BIOS, switched AHCI/SATA modes, burned ISO image to DVD and still same effect. This topic can be called a duplicated, but I have't find what it duplicates. In other topics people asked what will happen if they update Windows 8 to 8.1 having already dual boot and I have installed Windows 8.1 and want to install Ubuntu alongside with it Did I miss something?

    Read the article

  • How to determine why a burned DVD won't boot?

    - by cat pants
    So I have an interesting problem where a burned DVD of "debian-7.2.0-ia64-CD-1.iso" won't boot. The DVD is a DVD+RW. I have tried erasing, burning, and booting from "debian-live-7.0.0-i386-gnome-desktop+nonfree.iso" and that works fine, but I would rather install debian 7.2 with the x86-64 architecture. After burning "debian-7.2.0-ia64-CD-1.sio", I can mount the CD as well and it appears that all the files show up correctly. I was just wondering if there is any sort of boot sector I can try inspecting on the ISO to see if perhaps it is incorrect. Thanks!

    Read the article

  • System won't boot unless I type "exit" at initramfs prompt

    - by Ozzah
    I installed MDADM for my RAID, and ever since that when I boot up the system just sits at the purple screen forever. After pulling my hair out for a week, I finally discovered - purely by accident - that it's sitting at an initramfs prompt in the background and I have to blindly type "exit" and then Ubuntu resumes normal boot. How do I fix this? I am unable to reboot my machine if I'm not sitting in front of it because it will never boot!

    Read the article

  • How do I change the grub boot order?

    - by chrisjlee
    I've got windows 7 and ubuntu installed on a shared machine. A lot of the non-developers use windows. Currently the order of boot looks like the following (but not word for word) Ubuntu 11.10 kernelgeneric *86 Ubuntu 11.10 kernelgeneric *86 (safe boot) Memory test Memory test Windows 7 on /sda/blah blah How do i change it to default as windows 7 at the top of the list? Windows 7 on /sda/blah blah Ubuntu 11.10 kernelgeneric *86 Ubuntu 11.10 kernelgeneric *86 (safe boot) Memory test Memory test

    Read the article

  • How can I boot directly to a VirtualBox (.vdi) image (possibly via hypervisor)?

    - by Josh
    I have a system image in VirtualBox as a .vdi file. I am aware of how to convert this to other formats of VM using VBoxManage. I'd like to boot this image locally on a number of clients which currently have no OS installed. What's the simplest way to boot into this VM from bare metal? I'm willing to install some minimal OS if necessary. Is this even possible? Maybe there's something out there along the lines of VDI Blaster that will load a locally stored VM?

    Read the article

  • Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

    - by aceinthehole
    If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

    Read the article

  • Ubuntu 12.04 PXELINUX does not boot RHEL Kernel and Initrd

    - by utpal
    I have successfully setup PXE server on Ubuntu 12.04 with DNSMASQ for DHCP Proxy Service, TFTPD-HPA for TFTP service, NFS-KERNEL-SERVER, APACHE2 and SYSLINUX for pxelinux.0 bootloaded needed for pxe boot using the following POST: http://ubuntuforums.org/showthread.php?t=1606910 I was successfully able to pxe boot a client to a Ubuntu 12.04 LIVE CD. Next, I want to PXE boot a client to a RHEL 6.5 x64 Kernel and initrd image. I dont want to install, just boot a client so that it mounts initrd and I can get a minimal filesystem on the client. How can I do that? Please Help!!

    Read the article

  • Can't boot ubuntu on Lenovo V570

    - by Aaron
    I recently tried to install Ubuntu on my new Lenovo V570, planning to dual boot 11.10 with Windows 7. I realized after installing that it would boot straight into Windows, so I looked up the issue. I read something about UEFI, and found a page suggesting that I wipe the drive with GParted, installing a msdos partition table, and then install Ubuntu. (I tried linux mint first, because that's what I had on my flash drive at the moment.) I attempted this, and now I'm left with a computer that won't boot anything from the hard drive. If I install Ubuntu or Linux Mint 12 using either MSDOS or GPT, it simply skips the hard drive. My BIOS has no option to disable EFI, and I'll admit I know shamefully little about EFI or different types of partition tables. I'd like to know what I have to do to make my computer boot again.

    Read the article

  • 64 bit Windows 7 + 32 bit windows XP dual boot?

    - by Mick
    I have purchased an i7 based PC pre-installed with 64 bit windows 7 (home premium). Unfortunately some third party 32 bit software that I need to use is not working properly (see stackoverflow.com for details). I am now torn between the plan of installing windows XP 32 bit or making it dual boot. Which option do you think will give me the least problems? And if the answer is dual boot, then can you point me to a good guide for how to do it, preferably a guide specifically for my two OS's created in this order (i.e. 7x64 first). EDIT: the performance of my 32bit programs is critical so am concerned about any kind of 32bit XP "emulation".

    Read the article

  • Cloning my Windows boot drive--Windows hangs on booting off new drive.

    - by idyllhands
    I copied my Windows XP partition to a new drive using GParted live CD (using the GUI). I made sure to flag it as boot, and then used my XP disc to enter Recovery Console and ran fixboot and fixmbr on it. Now, it will boot up to the Windows flash screen, but hangs at that point. Any suggestions on how to proceed? I am just trying to come up with a quick way to clone my system and make the drive bootable, and gParted seemed like the easiest way, but now I've been working on it for over an hour.

    Read the article

  • Weird Ubuntu Desktop Boot Partition On External Hard Drive

    - by Magnitus
    I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

    Read the article

  • PC won't boot up after installing 11.10

    - by bakhshu
    I have a HP/Compaq s1010z (AMD64) desktop and installed 11.10 from a CD (using the entire disk). So it formatted the entire drive, went through installation and then it ejected the CD and asked me to click the Restart button, which I did. It rebooted fine the first time, but any time thereafter, it fails. Meaning, after the initial BIOS screen, the monitor seems to be stuck in limbo with a text cursor blinking on the top left corner, as if it can't find anything to boot from. At first I tried reinstalling (reformat entire drive again) - no improvement. Then I did an in-place re-installation (leave home dirs in place, just redo the OS), nothing there either. Then I put in the 11.04 CD, changed the boot order to CD first, and got the CD menu, chose 'Boot from first hard disk' and it booted fine. The problem is that I can't boot without the 11.04 CD, how ironic! Any ideas?

    Read the article

  • Win8 x64 Laptop (Samsung) unable to boot after installing Ubuntu

    - by user285872
    I posted here a while back and no one was able to help me so I am going to try to explain my problem better. I have a Samsung series 7 Ultrabook and I connected a USB optical drive with an Ubuntu 14.04 installation disc. I did not set or change any of my partitions, however, as I mainly wanted to just be able to boot from the disc and fool around with Ubuntu. Upon restarting my computer I get a blue-screen message saying: Recovery Your PC needs to be repiared The Boot configuration date file is missing some required information. File: \BCD Error Code: 0xc000000d You'll need to use the recovery tools on your installing media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. However I am never given the option to even try to boot to anything. When I turn my computer on the optical drive spins and then after a moment or two comes to a halt. I turned off safeboot and switched it to CSM (I believe that is what it is called) mode, and that makes it so when I turn my computer on it takes me to a Windows Recovery screen. I am able to change the date I want to recover and view all the applications installed, however upon recovering Windows says "All boot options are tried. Press key to recover with factory image using Recovery or any other keys for next boot loop iteration." It seems to be stuck in a loop. Can someone please help me?! I'm so confused and nothing is working!

    Read the article

  • no boot option after install ubuntu 12.04 LTS using cd

    - by utamaku
    im facing a problem. after installing Ubuntu 12.04 LTS using boot from CD, when reboot there is no boot option to choose the OS. i directly log in to my Windows 7. before this im having an issue with the 'nomodeset' if not mistaken. after tick [x] on the nomodeset, i can install my Ubuntu, and stuck again at choosing the partition. so i had done 2 partitions for ubuntu, 1 partition for ubuntu ( ext3, mount /) and the other 1 for swap. then i can proceed until finished the installation. and after the system want to reboot. it take some times and just stuck at the screen doing nothing. not rebooting at all. i force to shutdown then restart again then directly go into windows 7 without boot option. in win7 the partitions for ubuntu is gone. i had tried the boot-repair thing and still doesn't help. it just show up the _ (terminal thing i guess). i typed boot repair and still the same. im using acer aspire 4736z. please anybody help me with this issue.

    Read the article

  • Why is my PC boot time slow when USB HDD attached?

    - by John
    I have a USB Hard disk that I am using as a secondary drive just for extra storage. When this is attached and I start my PC the second screen says searching for mass storage dives for about 5 minutes before continuing on. The same happens when I have a USB pen disk attached upon boot. If I attach the device after the PC has loaded then it is very quick however plugging and unplugging is not ideal. Is there away to disable this in the BIOS as I cannot instantly see an option. On boot it informs me I have an American Trends AMIBIOS in the BIOS setup it states the version as v02.58 2006. This is running on a ASUS MV2 Motherboard.

    Read the article

  • Windows XP: How to boot up in normal mode after improper shut down?

    - by Nick
    I work in two different locations and whenever there is a power outage at one of the locations, Windows XP detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows XP enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows XP always boots into NORMAL mode no matter how many times it is improperly shut down?

    Read the article

  • Lenovo Windows 8 EFI restore from image

    - by anderhil
    First time here. I have bought e530 with windows 8 and the first hour of work with it i have a problem. I have ssd with windows 7 which i want to use with my new e530. I have made a sysprep of win 7 and installed ssd to the e530. The HDD which was inside e530 i want to use as second hdd instead of my DVD Drive. I connected this HDD through usb-to-sata adapter to copy some files from ssd to the hdd. Unfortunately it didn't see the file system on the HDD (but first time i have booted to it and first boot into Windows 8) I've made some mistakes and i corrupt the filesystem on the hdd. I tried bunch of tricks to recover the GPT, but it didn't work. I have managed to recover the Lenovo_Recovery partition to my ssd using recovery tools. And now I'm stuck, with this new things to me - EFI, GPT, etc i don't how this stuff works, and i have been trying to understand this for hours - but nothing seems to work. I want to restore the Windows 8 to the hdd, so it is there alive. What i have done so far: Formated the HDD I took the PBRALL file from the Lenovo_Recovery " convert gpt create partition Primary size=1000 ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=W format quick LABEL=WINRE_DRV create partition efi size=260 assign letter=s format quick fs=fat32 LABEL=SYSTEM_DRV create par msr size=128 create partition primary noerr assign letter=t format quick LABEL=Windows8_OS shrink desired=12197 create partition Primary ID=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC gpt attributes=0x8000000000000001 assign letter=q format quick LABEL=Lenovo_Recovery " it recreated the partitions copied contents of SDRIVE.zip to SYSTEM_DRV partition copied contents of WDRIVE.zip to WINRE_DRV partition Copied restored Lenovo_Recovery back to Lenovo_Recovery partition So now I have 3 system partitions: SYSTE_DRV BOOT boot.sdi EFI BOOT bootx64.efi LenovoBT.efi Lenovo ... Microsoft ... WINRE_DRV\Recovery\WindowsRE\winre.wim Lenovo_Recovery (whic contains install.wim and bunch of other things) So i put back the HDD inside the laptop and tried to boot - but nothing works. It just doesn't boot to anything - no errors - nothing at all. When I choose this HDD manually for boot - just black screen blinks and that's all - it returns back to the devices boot menu. SYSTEM_DRV is EFI partition, so I don't understand why it doesn't boot, it has files needed inside. Can anybody tell me what should be done to make it boot to recovery console or smth like that? How to restore the Windows 8 from the Lenovo_Recovery install.wim image? As I understand I have all the files where they should be, but why it doesn't work? How to troubleshoot such things? Also, if somebody has good link where EFI booting process is explained in details that would be great. Cause i still don't understand how it knows what partition to boot?

    Read the article

  • How to remove the pause during JBoss 5.1.0 GA boot between ProfileServiceBootstrap and AnnotationCreator?

    - by rrc7cz
    I've managed to strip down my JBoss profile enough that it boots in 1.5 minutes. I started with the web profile and started pulling out stuff I didn't need. The bulk of my boot time can be seen here: ... 15:21:51,890 INFO [ProfileServiceBootstrap] Loading profile: ProfileKey@86d597[domain=default, server=default, name=np] 15:22:55,406 WARN [AnnotationCreator] No ClassLoader provided, using TCCL: org.jboss.managed.api.annotation.ManagementComponent 15:22:55,578 WARN [AnnotationCreator] No ClassLoader provided, using TCCL: org.jboss.managed.api.annotation.ManagementComponent ... Does anyone have any idea what JBoss is doing here for 1 minute? If so, is there any way to speed it up or skip it entirely? This is for developer instances, so boot time is quite important.

    Read the article

  • Which rdisk value in boot.ini maps to which disk?

    - by MA1
    Following are the contents of a sample boot.ini: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT multi(0)disk(0)rdisk(0)partition(2)\WINNT="Windows 2000 Professional" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /NOEXECUTE=OPTIN /FASTDETECT The rdisk value tells the physical disk number. So, if I have three hard disks say: /dev/sda /dev/sdb /dev/sdc Then how to know which disk (/dev/sda or /dev/sdb or /dev/sdc) is rdisk(0) and which disk is rdisk(1), etc.?

    Read the article

  • Do I have to reinstall Mac OS in case something goes wrong during a Windows Boot Camp install?

    - by Rich Jennings
    I have a Macbook laptop running Snow Leopard, there's absolutely no information on the laptop, just a few unimportant files on it, I wanted to use Boot Camp Assistant (version 3) to create a partition and install Windows on it to run Windows alongside Mac OS. My CD/DVD drive doesn't work at all so I'm gonna have to mount Windows on a USB stick and install it from there. My question is, when I start Boot Camp it asks me to back up my files but I have nothing to back up, I was just wondering, in case I go through with the Windows install and something goes wrong do I have to reinstall Snow Leopard? My Snow Leopard install DVD can't be read by the laptop that's why I ask, I wouldn't know what to do if I had to reinstall it.

    Read the article

  • Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time [migrated]

    - by aceinthehole
    If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >