Search Results

Search found 8656 results on 347 pages for 'boot to vhd'.

Page 64/347 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

    - by Estel
    A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

    Read the article

  • Dualboot Asus n56v (ubuntu / win 7 x64) - ubuntu doesn't detect partition table made by windows

    - by user76439
    I have an Asus n56v and I've got troubles installing Ubuntu 12.04 x64. I already have installed Windows 7 x64! The hard drive is: Hitachi HTS547575A9E384 My problem: The installation program doesn't recognize the already existing partitions and is offering only options where there are partitions. Can someone help me out? Is this an ACPI/IDE conflict, missing driver or conflict with Windows 7? (I'm not an expert on Linux, only working sometimes with it.) I now tried out some options concerning EFI with a GTP-table. Everything worked but I wasn't able to fix a dual boot (Windows boot loader) nor with GRUB2. The laptop is still having a BIOS, but is able to boot DVDs/CDs in EFI-mode. Now I try to avoid EFI and GTP using the old windows MBR style. I reinstalled Windows, so far no problem. When I want to try to install Ubuntu, it doesn't detect the already existing partition table. It is just showing me an empty space for the whole disk. Other threads like Ubuntu 12.04 does not see windows already install on my computer (dual installation) don't help me out. os-prober shows me a correct result. I don't know how to deal with gdisk as shown in Installer doesn't detect existing partition table/windows 7 partition. I have 750GB for the whole disk. I'm using: 90GB for Windows reserved partition + system partition, 500GB for data and the rest should be for SWAP and linux-system. How can I make Ubuntu detect the partition table?

    Read the article

  • WIN7 and Ubuntu lost after Installing ubuntu 12.04 and win7 dual system ,I have no OS on my laptop now

    - by abos
    Here is the procedure: In the morning I installed ubuntu using a USB directly without config any thing to my win7 system. After install complete, ubuntu installation software tell me to reboot.And everything is just find. While rebooting, there is NO UBUNTU system for me to select,and my laptop go straight to log in using WIN7. NO ubuntu shows on WIN7's configuration(Default System). Log in ubuntu using usb(try ubuntu without installation), I can find ubuntu's filesystem was already there. Formatting the disk on WIN7's disk management, rearranging them to other disk.Still having no trouble with WIN7. In the afternoon try a few times of installation and uninstallation of ubuntu. still shows no sign of selecting ubuntu system. In the evening another trial while installing ubuntu with the third option of: installing ubuntu alongside with INW7, erase win7 and install ubuntu. somethingelse --- my check failed with configuartion for what comes out with the 'something else' option,reboot. And I have no system now with some cmd tips say: Reboot and Select proper Boot Device or Insert Boot Media in selected Boot device and press a key. Files those on win7's orginal file system and Ubuntu filesystem can still be found when I 'try ubuntu without installation'. 5.But I just got no OS when I reboot my laptop normally.

    Read the article

  • System in low graphics, deleted linux, grub rescue, can't access windows

    - by First timer
    So I'm pretty new to Ubuntu but I managed to install it with no big problems on both my desktop and netbook. When I installed it on my brother's netbook everything went horribly wrong and now I fear the system is close to beyond repair. The problem was first that it said it did not have any space left (seemed ridiculous since it had a lot). Then Ubuntu began booting into a "System is running in low graphics mode error" which I then tried to fix, using all the tips I could find in here but nothing helped. I think the graphics error and lack of space might have been related but I can't be sure. Finally I gave up repairing Ubuntu and went for a reinstall. Shouldn't have done that! I read that I should simply open Ubuntu through a live usb and choose GParted to delete the Linux partitions so I did and rebooted accordingly. Next, I was to install Ubuntu but now I am only given the option to wipe the whole disk for Ubuntu, not install along with windows 7. If I access GParted I can still see the ntfs partitions that hold windows 7 (there are 2: one labeled RECOVERY and another labeled OS and boot) so why can't I access them? Btw. the OS and boot has a little red mark with a warning that 1 cluster is referenced to multiple times, don't know what that means. If I boot without the live usb I am sent directly into a grub rescue "black screen of the computer will follow no orders". Please, I know that the easiest might be to simply wipe the whole thing clean but there are important files and programs on windows 7. Is there a way to just access windows? It is a dell inspiron 1018 mini netbook, so I have no cd input and no windows 7 installation cd.

    Read the article

  • No operating system found even when grub2 was reinstalled

    - by Cruzer
    I know there have been many variations on this question and have certainly tried to do my research. I don't really know what I'm doing so I would rather not take risks. I am trying to dual boot xubuntu and windows 7. I started out with xubuntu and just installed windows. Of course, the mbr got overwritten and windows didn't seem to recognize linux. So I booted to the live cd and rewrote the mbr. And of course, now I get the error "No Operating System Found" on startup. I have been following these tutorials to help me out. community.linuxmint.com/tutorial/view/245 unix.stackexchange.com/questions/96977/grub-wont-install ubuntuforums.org/showthread.php?t=2036730 Specifically, I ran these commands: # sdb2 is the partition with xubuntu sudo mount /dev/sdb2 /mnt # sdb1 is my boot partition sudo mount /dev/sdb1 /mnt/boot # not sure what this does, but ran it anyway... for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done sudo chroot /mnt #once chrooted grub-install /dev/sdb update-grub here's a link to my gparted https://www.dropbox.com/s/zpbbzh9z7k1l3pj/gparted.png EDIT--- didn't realize that the drive letters are different in the picture than in my code (its sda in the pic instead of sdb). I have been restarting a lot and sometimes the drive letters change and make my usb into sda.

    Read the article

  • Ubuntu live cd : black screen and blinking cursor

    - by IFasel
    I try to install ubuntu 12.04 on my computer. I can get to the purple screen on the live cd but then, if I choose "Installing Ubuntu", I have a black screen with a cursor blinking (and nothing else happens). My PC : acer aspire M3920, CPU i5-2300, 8 Gb RAM, NVIDIA gt 405. What I already tried : I tried with 12.04 and 13.04 daily build I tried with a live usb and with a live dvd I tried the following boot options : nomodset, acpi=off I googled a lot and it seems that it could be a graphic card problem. Do you know any other boot options that I could try ? UPDATE This is not a duplicate : I've tried all the common boot options (nomodeset, noacpi...) and it doesn't change anything. With the option "no splash" (instead of "quiet splash"), I can see what happens before the forever-blinking cursor : [sdg] no caching mode present [sdg] assuming drive cache : write trough ata8.00: excetion Emask 0x52 ... frozen ata8 : SError : { RecovData RecovComm UnrecovData...} ata8.00 : failed command : IDENTIFY PACKET DEVICE ... ata8.00 : status : { DRDY } ata8 : hard resetting link Does somebody know what it means ? N.B. astonishingly, Puppy Linux boots fine (but Debian, Fedora and Ubuntu do not) Solution In fact, it was not a graphic card problem. I had to disconnect the dvd drive and connect it to another free sata connector (I don't really understand why Ubuntu had trouble with this connector and Windows 7 not). After that, everything worked fine.

    Read the article

  • Booting off a ZFS root in 14.04

    - by RJVB
    I've been running a Debian derivative (LMDE) on a ZFS root for half a year now. It was created by cloning a regular ext4-based install with all the necessary packages onto a ZFS pool, chrooting into that pool and recreating a grub menu and bootloader. The system uses an ext-3 dedicated /boot partition. I would like to do the same with Ubuntu 14.04, but have encountered several obstacles. There is no Trusty zfs-grub package The default grub package doesn't have ZFS support built in. I found a small bug in the build system responsible for that (report with patch created) and built my own grub packages. The built-in ZFS support is dysfunctional, it does not add the proper arguments to the kernel command line I thus installed the ZoL grub package I also use on my LMDE system, which does give me a correct grub.cfg However, even with that correct grub.cfg, the boot process apparently doesn't retrieve the bootfs parameter from the ZFS pool; instead the variable that's supposed to receive the value remains empty. As a result, initrd tries to load the default pool ("rpool"), which fails of course. I can however import the pool by hand, and complete the process by hand. If memory serves me well, I also had to disable apparmor, to avoid the boot process from blocking after importing the pool. Am I overlooking something? Just for comparison, I installed the Ubuntu 3.13 kernel on my LMDE system, and that works just fine (i.e. the identical kernel and grub binaries allow successful booting without glitches on LMDE but not on Ubuntu).

    Read the article

  • Grub2 cannot detect Windows 8

    - by MetaChrome
    At installation it did not detect Windows. I mounted the Windows partition and have run os-prober with no results returning. I am able to boot Windows or Ubuntu by specifying the partition in UEFI boot order. The bios does not appear to allow booting with legacy. SecureBoot is on. This is with Ubuntu 12.04 LTS on a Inspiron 15. Here is the gdisk: 1 2048 1026047 500.0 MiB EF00 EFI system partition 2 1026048 1107967 40.0 MiB FFFF Basic data partition 3 1107968 1370111 128.0 MiB 0C01 Microsoft reserved part 4 1370112 2394111 500.0 MiB 2700 Basic data partition 5 2394112 544743423 258.6 GiB 0700 Basic data partition 6 606183424 625140399 9.0 GiB 2700 Microsoft recovery part 7 544743424 545230847 238.0 MiB 0700 (/boot) 8 545230848 556949503 5.6 GiB 8200 (swap) 9 556949504 606181375 23.5 GiB 0700 (/) When installing ubuntu, I believe I specified that the bootloader be installed on /dev/sda. I added the following to /etc/grub.d/40_custom but booting ubuntu did not offer a grub menu: menuentry "Windows 8" { set root = "(hd0,4)" chainloader +1 } When booting I think I see "EFI Disk error" flash very quickly before Ubuntu starts booting.

    Read the article

  • Hard-drive will randomly fail to load GRUB. Booting a live USB/CD fixes the issue temporarily

    - by Usagi
    I am running 12.04 64-bit and am dual booting with Win7, for full disclosure, although I suspect that has nothing to do with my problem. Occasionally the boot-loader(GRUB) will fail to load and I will be presented with a black screen with a single blinking line. There is no apparent pattern although I suspect there is one and it is related to a program I am running. This has happened to me eight out of ten power cycles now and I can fix it consistently, however, I have no idea why it happens. My current fix is to boot a live CD (I've tried both KNOPPIX and Ubuntu with the same result) and that's it. Somehow booting with the live CD is enough to "wake-up" my hard drive. I then reboot and GRUB magically appears again. So what is going on? Is it possible that a program is corrupting my MBR and the live CD is restoring it? How can I narrow down the possibilities? Thanks. Additional: This is still a problem. I'm convinced now that it is not hardware related as I've spent the last month and several boot cycles on Windows without a hiccup. Recently when I started using Ubuntu again the problem started again. I am more interested in figuring out what is going on rather than actually fixing the problem. Are there any tools, logs, etc. I can use to unravel this mystery?

    Read the article

  • Win7 and Ubuntu refuse to coexist

    - by Jeremy
    I'll make this quick: I have an HP laptop with win7, I installed Ubuntu on a separate partition, and when I tried to boot win7 from grub I got the loading screen and no progress-ever. I did a /fixmbr with the windows recovery cd and got back windows, but wiped out grub and my access to Ubuntu. I reinstalled grub from the Ubuntu live usb ( I know I did this correctly) and now windows won't boot, again. I'm a linux noob at a loss. Your wisdom is greatly appreciated! Update in response to Scott Severance: your instructions say to determine the main partition on my computer. I'm not sure what this means... my windows partition is at sda2, my boot partition is at sda1, and my linux root partition is at sda7... Which is the "main" partition? UPDATE: I determined that you were probably referring to the linux root(/) partition, because this was the only partition for which I could follow your instructions without errors. Now, Windows is booting fine (thanks to /fixmbr), but even after the grub instructions there is no grub. It boots straight into windows.

    Read the article

  • Can I install Ubuntu 13.10 without the internet?

    - by user1526570
    I'm new to Ubuntu and Linux in general. I'm currently out of town and the dorm I am living in has terrible internet connection. It won't be another 2-3 weeks before I can go home and have proper internet connection. So my question is whether or not I can install Ubuntu 13.10 in my laptop without the internet and then do the updates once I go home? Also, I'm attempting to do a dual boot with my Lenovo G505s which was pre-installed with Windows 8. Hopefully I can pull this off. I already did the necessary things (I think and hope so) prior to installation: Disable secure boot Enable legacy and boot UEFI first Create partition Put installer in my pen drive As I am quite new to this, any advice would be of great help. Thanks in advance! EDIT: I tried yesterday. The installation asked me to connect to the internet, so I used my crappy dorm internet. When it reached the downloading/installtion of Ubuntu One, it just stopped and went on forever. So I had to stop it.

    Read the article

  • How do I reset/update my BIOS for Optiplex GX280?

    - by Sam Langlhey
    So far this has been a nightmare for me, which has been frustrating me constantly. I am using Dell Optiplex GX280 with Windows XP home edition, which is running a BIOS version A04. Recently, i've rebooted the pc to find out that its not booting. It will get to the Windows boot up screen with the progress bar but only to restart to the same process again, over and over. Frustrated that I am, i've inserted the Windows recovery CD to at least either repair of reinstall the operating system to find out that was not possible. I hit F8 to have the boot options, each of the boot option that I've selected gave me an error saying: "Selected boot device is not available." Right after that, I went to the BIOS setting and did a diagnostic test, which recognized all the Boot devices onboard. Now, I cannot even repair of reinstall Windows XP, because the system is not booting from none of the boot devices. The surprise is when I removed the hard-drive from the computer and loaded it on into another computer successfully; that's right, there is nothing wrong with the hard drive. After that I was totally puzzled. I found a few pointers online saying that the BIOS start-up block might be corrupted itself and I might need to flash/update the BIOS. I found the detailed instruction on how to create a Boot up disk by downloading the BIOS firmware from the manufacture's website. I did exactly as instructed below: Download the latest version or your choose version of BIOS file for your computer or motherboard from the manufacturer’s support site. Rename the downloaded file to AMIBOOT.ROM. Copy the file to a floppy disk. Insert the floppy disk to the floppy drive. Turn on the system. After I did that and powered on the PC to boot from the floppy drive, it gave me this error message: "Non-System Disk or Disk Error. Replace and Strike any key when ready." I did all that, and I kept on pressing [Ctrl]+[Home] to force it, but it did not did any satisfying result. Desperate as I am, my next attempt is to try the instruction below. Since I want to be ready, in the event it does not work, do you have any solution that you can provide? Please keep in mind that I cannot boot from any of the devices at this moment. My only hope now is to come on with a solution that will work through the Floppy drive, since that's the only drive that affected. Thank you very much for your advice and support in advance. To create a Windows startup disk, insert a floppy disk into the drive of a similarly configured, working Windows XP system, launch My Computer, right-click the floppy disk icon, and select the Format command from the context menu. When you see the Format dialog box, leave all the default settings as they are and click the Start button. Once the format operation is complete, close the Format dialog box to return to My Computer, double-click the drive C icon to access the root directory, and copy the following three files to the floppy disk: Boot.ini NTLDR Ntdetect.com

    Read the article

  • Tulsa Azure Boot Camp

    - by dmccollough
    Windows Azure Boot Camp presented by HyperVize & TulsaTech When: Thursday July 1st and Friday July 2nd Registration: Click here. Where: TulsaTech Riverside Campus 801 East 91st Street Tulsa, Ok 74132-4008 Click here for a map. Summary Tulsa Windows Azure Boot Camp is a comprehensive 2 day training program for members of the development community in Tulsa Oklahoma. At the conclusion of this program, the attendees should have a deep understanding of Azure, BPOS, and advanced development techniques for both platforms. Who should attend: Web Developers, Backend Developers, SQL DBAs, Consultants, & IT Leaders who are interested in using Azure for development, data storage, or processing. Both days is suggested, but if you can't attend both days, contact us for a special one day pass. Schedule: Day one of the training sessions will be held from July 1st 2010 between the hours of 9AM and 4:30PM. Topics covered on day 1: Azure Basics, Web Development, & Data Storage. Day two of the training sessions will be held from July 2nd 2010 between the hours of 9AM and 4:30PM. Topics covered on day 2: Architecture, Business Value, SOA Development, SQL Azure, & Advanced Development. Pre-requisites: If you want to stay up to speed on the Windows Azure Labs you will need to install the tools and updates listed on the Windows Azure Boot Camp website: http://windowsazurebootcamp.com/whattobring Boot Camp Agenda Day 1 – July1st 2010:  · 8:30 – 9:00 - Registration · 9:00 – 10:00 - Module 1: Intro to Azure & Cloud Computing · 10:00 – 11:00 - Module 2: Using Web Roles · 11:00 – Noon - Lab 1 & workstation configuration · Noon – 1:00 - Lunch · 1:00 – 2:00 - Module 3: Blobs · 2:00 – 3:00 - Module 4: Tables · 3:00 – 4:00 - Module 5: Queues · 4:00 – ? - Q&A / Open Discussion Day 2 – July 2nd 2010: · 9:00 – 10:00 - Module 6: Building a business with Azure · 10:00 – 11:00 - Module 7: Cloud Scenarios · 11:00 – Noon - Module 8: SQL Azure · Noon – 1:00 - Lunch · 1:00 – 2:00 - Module 9: Basic Worker Roles · 2:00 – 3:00 - Module 10: Advanced Worker Roles · 3:00 – 4:00 - Module 11: Azure Diagnostics · 4:00 –    ??? - Module 12: App Fabric  

    Read the article

  • Windows 7 Keeps Changing the MBR on boot

    - by steven
    I am having an issue with Windows 7 changing the boot order everytime I start up. I have 4 partitions: boot linux windows. Grub is installed on the boot, and boots up both operating systems fine, however when I boot to Windows the bootable partition is changed to Windows and the MBR is rewritten. How do I stop this? Its rather annoying to have to boot, chroot and fix this problem everytime. I also don't want to use the Windows boot select.

    Read the article

  • qemu -cdrom ubuntu.iso -boot d -net nic,model=virtio -m 1024 -curses

    - by Gert Cuykens
    How do I disable frame buffers in Ubuntu 13.10 Saucy kernel, I tried all kinds of kernel parameters but none work? DEFAULT ramdisk LABEL ramdisk kernel /casper/vmlinuz append boot=casper toram initrd=/casper/initrd.img -- vesafb.nonsense=1 LABEL isotest kernel /casper/vmlinuz append boot=casper integrity-check initrd=/casper/initrd.img -- vesafb.nonsense=1 LABEL memtest kernel /install/memtest append - DISPLAY isolinux.txt TIMEOUT 300 PROMPT 1

    Read the article

  • HP UX can not boot from Ignite Tape

    - by Spirit
    We have hp rp2470 server running hp-ux 11.00, with LVM mirroring. As for redundancy we have second rp2470 same hw (same two processors, same ram, same two hdd’s, same number of lan cards). I want to clone first one to the second. For that purpose I am making ignite tape with the following command: make_tape_recovery -x inc_entire=vg00 Ignite tape finishes without problems. When I boot second server from this ignate tape, server is starting to boot, and ignite restore finishes without any errors, only few notes, which are normal. However vmunix is not booting and when restore finishes, it boot to ISL prompt. From this I cannot boot /stand/vmunix. I tried to run recovery shell but no success. When recovery shell ask to do frecover to restore critical files, then I receive error: frecover(5405): unable to open /dev/rmt/0m At first I thought that the problem might be in the difference of the firmware version of the servers: fw version of production server is: Firmware Version 43.50 and fw version of backup server is: Firmware Version 42.19 So i did a fw upgrade of my backup server so that both servers are v43.50, and tried a recovery but again cant boot the system. Next I did another archive tape with -I (Interactive) flag: make_tape_recovery -I -x inc_entire=vg00 and tried recovery with it, again no good. I cannot find any error or warnings on ignite log, and I cannot boot hpux. I am only on ISL prompt. This is what i've noticed on the gsp logs: ************* SYSTEM ALERT ************** SYSTEM NAME: mcnfwim1 DATE: 07/27/2003 TIME: 10:18:49 ALERT LEVEL: 6 = Boot possible, pending failure - action required REASON FOR ALERT SOURCE: 8 = I/O SOURCE DETAIL: 6 = disk SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail LEDs: RUN ATTENTION FAULT REMOTE POWER FLASH OFF ON ON ON LED State: Boot Failed. Running non-OS code. Check Chassis and Console Logs for error messages. 0x00000060860010B0 00000000 00000000 - type 0 = Data Field Unused 0x58000860860010B0 00006706 1B0A1231 - type 11 = Timestamp 07/27/2003 10:18:49 And another gsp log: Log Entry # 3 : SYSTEM NAME: mcnfwim1 DATE: 07/27/2003 TIME: 10:12:20 ALERT LEVEL: 6 = Boot possible, pending failure - action required SOURCE: 8 = I/O SOURCE DETAIL: 6 = disk SOURCE ID: 0 PROBLEM DETAIL: 0 = no problem detail CALLER ACTIVITY: 1 = test STATUS: 0 CALLER SUBACTIVITY: 0B = implementation dependent REPORTING ENTITY TYPE: 0 = system firmware REPORTING ENTITY ID: 00 0x00000060860010B0 00000000 00000000 type 0 = Data Field Unused 0x58000860860010B0 00006706 1B0A0C14 type 11 = Timestamp 07/27/2003 10:12:20 Type CR for next entry, - CR for previous entry, Q CR to quit. Please note that I can not change anything on the production server. I can only make changes to the backup server. Any help is appreciated.

    Read the article

  • CentOS - dual boot from new partition

    - by Dima
    I need to install two copies of the CentOS 5.5 (bank A and bank B) on different partitions of the same hard disk and install grub boot loader to another partition (visible from both banks). The boot loader should redirect the boot menu to bank A or bank B (according to the configuration). The new partition is mounted to /common_partition and grub is installed on it using following command: grub-install /dev/hda In the new partition I'm created the following menu.lst file: title BOOTCONTROL REDIRECT : PLEASE WAIT root (hd0,1) configfile /boot/menu.lst boot On my setup: both partitions (bank A and bank B) are primary and grub is installed on MBR. The problem is: but the new boot loader (on common_partition) did not load. What wrong on my configuration?

    Read the article

  • Insight into GNU/Linux boot process

    <b>Musing with GNU/Linux:</b> "In this document we will take a look at the different aspects of the boot process. Such as the BIOS which is the first code which runs, the boot loaders that can load different operating systems, pass arguments to the kernel, load it from different sources like a hard drive, a flash, and network & finally the kernel itself."

    Read the article

  • Mount a LUKS partition at boot

    - by Adam Matan
    Hi, I have installed an Ubuntu machine with two encrypted LUKS partitions: one for / and one for /home. I've reinstalled the machine to upgrade to 10.04. Again, the / is installed using LUKS, and I'm able to mount the /home using: mkdir /media/home sudo cryptsetup luksOpen /dev/sda2 home sudo mount -t ext3 /dev/mapper/home /media/home The problem is, this cryptfs mapper disappears after boot, so I putting the appropriate line in fstab fails. How do I set the cryptfs to prompt for password and unlock the drive at boot? Thanks, Adam

    Read the article

  • My Laptop Beeps when I try to USB boot install

    - by Gino
    I tried to boot install Ubuntu using my laptop (without CD Drive) using a USB drive, then it goes to the boot selection menu (the one with the Ubuntu logo installation options). I selected Install then my laptop just beeps - 1 short beep, after that it stops then nothing installs, it just stays at the installation menu, can someone please help? Laptop Specs Neo Notebook (forgot the model version) 2GB RAM running Win XP SP3 150GB Hard Drive memory Would really appreciate if someone helped, I just used the normal 12.04 installer.

    Read the article

  • Why is my hard drive mounted on /boot?

    - by divided
    I was doing an update and it said that the drive was full. Here is df -h: Filesystem Size Used Avail Use% Mounted on 78G 2.7G 72G 4% / none 242M 184K 242M 1% /dev none 247M 0 247M 0% /dev/shm none 247M 48K 247M 1% /var/run none 247M 0 247M 0% /var/lock none 247M 0 247M 0% /lib/init/rw /dev/sda1 228M 225M 0 100% /boot How can I fix /dev/sda1 being mounted on /boot?

    Read the article

  • Stop Windows boot

    - by Parley Applegate
    Installed Ubuntu over a Windows8 trial. After installation, Windows8 still tries to boot. Wiped disk clean with Acronis and reinstall Ubuntu. Windows8 still tries to start, but goes to blank screen. Ubuntu never tries to boot. Naturally live mode works fine. What do you think of wiping disk again, install Windows7 and try using GRUB approach or do you know how to remove Windows from the cleaned disk?

    Read the article

  • Cannot boot from USB wtih ubuntu 13.10

    - by arunkant
    I downloaded ubuntu 13.10 amd64 iso and used all of following methods to make a install media. UNetBootin Universal USB installer (from windows) But I cannot boot from USB pen drive. Some time it just drop me in grub menu of previously installed ubuntu 13.04. Sometime it show a message "Could not open //fallback.efi: 14 ..." for a moment and then just stays there(blank screen). How to boot from USB pen drive?

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >