Search Results

Search found 6511 results on 261 pages for 'everyday usage'.

Page 57/261 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Announcing Oracle Environmental Accounting and Reporting

  - by Theresa Hickman

  Oracle just launched a new product called Oracle Environmental Accounting and Reporting designed to help company’s track and report their greenhouse emissions at the operational level.  Companies around the world are facing increasing pressure to improve their energy efficiency and reduce waste in their operations. Also, new worldwide greenhouse gas legislation is putting added pressure on companies to report the impact of their emissions and energy usage on the environment. Today, companies undergo extensive and expensive data audits to maintain a ledger of up-to-date emissions factors that compare figures on an annual basis. Existing “ad hoc” approaches utilizing manual or niche solutions have a high operational cost and weak data security and audit-ability. The ideal solution is to embed environmental usage within the mainstream business operations, such as recording energy usage at the time of invoice entry, and then report on those results. This is precisely what Oracle Environmental Accounting and Reporting is designed to do. You can now capture environmental data either electronically or manually; convert that to greenhouse gas emissions; comply with mandatory and voluntary greenhouse gas reporting schemes; and identify opportunities for CO2 emissions and cost reductions.   Oracle recently acquired the intellectual property for this solution which works with both Oracle E-Business Suite Release 12 and JD Edwards EnterpriseOne Release 9.0. For more information, visit Oracle Environmental Accounting and Reporting.

  Read the article

• Would I be able to use code hosting services to host malware code?

  - by NlightNFotis

  Let me start by saying that I am a computer security researcher. Part of my job is to create malware to deploy on a controlled environment in order to study or evaluate several aspects of computer security. Now, I am starting to think that using an online code hosting service (such as BitBucket, Github, etc...) to have all my code in 1 place, would allow me to work on my projects more efficiently. My question is: Are there any issues with this? I have studied those companies' privacy policies, and they state that they allow usage of their services for lawful usage. Since I am not distributing malware, but I am only using it on my machines and machines that I am authorized to use, aren't I allowed to use the service? For the usage that I am doing, malware is the same as any other software. I recognise that I should be extremely careful with code hosting, as any mistake from my part could hold me liable for damages and leave me open against legal action. As such I am recognizing that I should use private repositories, so the code is not available to the public. But how private is a private repository? How can I trust that companies like them will not leak or sell a potential (electronic) viral weaponry that I may have created in the future?

  Read the article

• Laptop battery life drastically decreased compared to Windows 7

  - by Aron Rotteveel

  I am running Ubuntu 10.10 on my Dell Studio XPS 1640 and have about one hour of battery life in it, compared to about 2.5 hours running on Windows 7. This is with wireless and bluetooth on, but still, the difference seems incredible. What could be causing such a difference and is there a way to close the gap without losing core functionality? EDIT: here's some output from powertop. This is with bluetooth turned off and Wifi turned on. The output seems pretty normal to me, but as indicated, this is about 1 hour of battery life on a full battery... Wakeups-from-idle per second : 476.2 interval: 10.0s Power usage (ACPI estimate): 2.5W (1.2 hours) Top causes for wakeups: 30.0% (167.2)D chrome 21.0% (117.3) [extra timer interrupt] 13.9% ( 77.4) [kernel scheduler] Load balancing tick 3.4% ( 18.9)D xchat 7.1% ( 39.8) [iwlagn] <interrupt> 5.9% ( 32.9) AptanaStudio3 3.9% ( 21.6)D java 2.7% ( 14.9) [TLB shootdowns] <kernel IPI> 2.5% ( 14.1) docky 1.8% ( 10.0) nautilus 1.6% ( 9.0) thunderbird-bin 1.0% ( 5.5) [ahci] <interrupt> 0.9% ( 5.0) syndaemon 0.8% ( 4.3) [kernel core] hrtimer_start (tick_sched_timer) EDIT: after changing /proc/sys/vm/laptop_mode to 5 (it was set to 0), wakeups seem to have decreased, although usage still seems far too high: Wakeups-from-idle per second : 263.8 interval: 10.0s Power usage (ACPI estimate): 2.6W (0.9 hours) EDIT: I seem to have discovered the main cause: I was using the open source ATI Drivers. I recently installed the official ATI drivers and laptop battery life seems to have doubled since. EDIT: last edit. The previous 'solution' of installing the official ATI drivers turns out to be a non-solution. Although it does increase battery life, my laptop resolution is maxed out at 1200x800 after a reboot. (Please note that this problem does not need answering in this question as it is a seperate case)

  Read the article

• Repeat use of Schema / Rich Snippets Markup i.e LocalBusiness Data

  - by bybe

  I am unable to find official wording and I'm hoping that some Rich Snippets/Schema Guru can give me some insight into proper usage of repeated content when it comes to using markup. I'm building a site that wants to use Schema as the markup type and the owner would like as much usage as possible. The business name, telephone and address will appear on every page now is it valid or even useful to use Rich Snippets on every page where this information is displayed. For example this information appears in the header, and footer of every page of the site and too give you an example of my current markup see below: <body itemscope itemtype="http://schema.org/LocalBusiness"> <header> <a itemprop="url" href="http://www.domain.co.uk/"> <img itemprop="logo" src="image.png" alt="Company Name Logo" /> </a> <span itemprop="telephone">01202 000 000</span> </header> <div> This is where the content will go</div> <footer> <span itemprop="name">Company Name</span> <span itemprop="description"> A small little bit about this company</span> <div itemprop="address" itemscope itemtype="http://schema.org/PostalAddress"> <span itemprop="streetAddress">Address Goes here</span> <span itemprop="addressLocality">Area Here</span>, <span itemprop="addressRegion">Region Here</span> </div> </footer> </body> !-- Local Business Schema Now Closed --> So as you can see above this information will be displayed on every single page.... Is this valid or bad to repeat usage of this information in schema format...

  Read the article

• How successful is GPL in reaching its goals?

  - by StasM

  There are, broadly, two types of FOSS licenses when it relates to commercial usage of the code - let's say the GPL-type and the BSD-type. The first is, broadly, restrictive about commercial usage (by usage I also mean modification and redistribution, as well as creating derived works, etc.) of the code under the license, and the second is much more permissive. As I understand, the idea behind GPL-type licenses is to encourage people to abandon the proprietary software model and instead convert to the FOSS code, and the license is the instrument to entice them to do so - i.e. "you can use this nice software, but only if you agree to come to our camp and play by our rules". What I want to ask is - was this strategy successful so far? I.e. are there any major achievements in the form of some big project going from closed to open because of GPL or some software being developed in the open only because GPL made it so? How big is the impact of this strategy - compared, say, to the world where everybody would have BSD-type licenses or release all open-source code under public domain? Note that I am not asking if FOSS model is successful - this is beyond question. What I am asking is if the specific way of enticing people to convert from proprietary to FOSS used by GPL-type and not used by BSD-type licenses was successful. I also don't ask about the merits of GPL itself as the license - just about the fact of its effectiveness.

  Read the article

• what's the difference between Routed Events and Attached Events?

  - by vverma01

  I tried to find through various sources but still unable to understand difference between routed events and attached events in WPF. Most of the places of reference for attached event following example is used: <StackPanel Button.Click="StackPanel_Click"> <Button Content="Click Me!" Height="35" Width="150" Margin="5" /> </StackPanel> Explained as: stack panel do not contain Click event and hence Button.Click event is attached to Stack Panel. Where as msdn says: You can also name any event from any object that is accessible through the default namespace by using a typename.event partially qualified name; this syntax supports attaching handlers for routed events where the handler is intended to handle events routing from child elements, but the parent element does not also have that event in its members table. This syntax resembles an attached event syntax, but the event here is not a true attached event. Instead, you are referencing an event with a qualified name. According to MSDN information as pasted above, the above example of Buttons and StackPanel is actually a routed event example and not true attached event example. In case if above example is truly about usage of attached event (Button.Click="StackPanel_Click") then it's in contradiction to the information as provided at MSDN which says Another syntax usage that resembles typename.eventname attached event syntax but is not strictly speaking an attached event usage is when you attach handlers for routed events that are raised by child elements. You attach the handlers to a common parent, to take advantage of event routing, even though the common parent might not have the relevant routed event as a member. A similar question was raised in this Stack Overflow post, but unfortunately this question was closed before it could collect any response. Please help me to understand how attached events are different from routed events and also clarify the ambiguity as pointed above.

  Read the article

• Using ConcurrentQueue for thread-safe Performance Bookkeeping.

  - by Strenium

  Just a small tidbit that's sprung up today. I had to book-keep and emit diagnostics for the average thread performance in a highly-threaded code over a period of last X number of calls and no more. Need of the day: a thread-safe, self-managing stats container. Since .NET 4.0 introduced new thread-safe 'Collections.Concurrent' objects and I've been using them frequently - the one in particular seemed like a good fit for storing each threads' performance data - ConcurrentQueue. But I wanted to store only the most recent X# of calls and since the ConcurrentQueue currently does not support size constraint I had to come up with my own generic version which attempts to restrict usage to numeric types only: unfortunately there is no IArithmetic-like interface which constrains to only numeric types – so the constraints here here aren't as elegant as they could be. (Note the use of the Average() method, of course you can use others as well as make your own).   FIFO FixedSizedConcurrentQueue using System;using System.Collections.Concurrent;using System.Linq; namespace xxxxx.Data.Infrastructure{    [Serializable]    public class FixedSizedConcurrentQueue<T> where T : struct, IConvertible, IComparable<T>    {        private FixedSizedConcurrentQueue() { }         public FixedSizedConcurrentQueue(ConcurrentQueue<T> queue)        {            _queue = queue;        }         ConcurrentQueue<T> _queue = new ConcurrentQueue<T>();         public int Size { get { return _queue.Count; } }        public double Average { get { return _queue.Average(arg => Convert.ToInt32(arg)); } }         public int Limit { get; set; }        public void Enqueue(T obj)        {            _queue.Enqueue(obj);            lock (this)            {                T @out;                while (_queue.Count > Limit) _queue.TryDequeue(out @out);            }        }    } }   The usage case is straight-forward, in this case I’m using a FIFO queue of maximum size of 200 to store doubles to which I simply Enqueue() the calculated rates: Usage var RateQueue = new FixedSizedConcurrentQueue<double>(new ConcurrentQueue<double>()) { Limit = 200 }; /* greater size == longer history */   That’s about it. Happy coding!

  Read the article

• Interface (contract), Generics (universality), and extension methods (ease of use). Is it a right design?

  - by Saeed Neamati

  I'm trying to design a simple conversion framework based on these requirements: All developers should follow a predefined set of rules to convert from the source entity to the target entity Some overall policies should be able to be applied in a central place, without interference with developers' code Both the creation of converters and usage of converter classes should be easy To solve these problems in C# language, A thought came to my mind. I'm writing it here, though it doesn't compile at all. But let's assume that C# compiles this code: I'll create a generic interface called IConverter public interface IConverter<TSource, TTarget> where TSource : class, new() where TTarget : class, new() { TTarget Convert(TSource source); List<TTarget> Convert(List<TSource> sourceItems); } Developers would implement this interface to create converters. For example: public class PhoneToCommunicationChannelConverter : IConverter<Phone, CommunicationChannle> { public CommunicationChannel Convert(Phone phone) { // conversion logic } public List<CommunicationChannel> Convert(List<Phone> phones) { // conversion logic } } And to make the usage of this conversion class easier, imagine that we add static and this keywords to methods to turn them into Extension Methods, and use them this way: List<Phone> phones = GetPhones(); List<CommunicationChannel> channels = phones.Convert(); However, this doesn't even compile. With those requirements, I can think of some other designs, but they each lack an aspect. Either the implementation would become more difficult or chaotic and out of control, or the usage would become truly hard. Is this design right at all? What alternatives I might have to achieve those requirements?

  Read the article

• useful customize/enhanced php functions that make thing easy and better

  - by I Like PHP

  Hello All, i like to work in php bcoz it's just amazing language. please share basic, useful, enhanced and customize function that make things better and easy in php and must be used in our all PHP project, i m sharing some of them please share your customize function that may be useful for everyone alternative/ enhanced print_r() and var_dump() function watch( $what ) { echo '<pre>'; if ( is_array( $what ) ) { print_r ( $what ); } else { var_dump ( $what ); } echo '</pre>'; } usage: 1. watch($_POST); // to see all post variable 2. watch($array); // to see any variable may b array, string or a variable enhanced mysql_escape_string() for multidimensional array to prevent sql injection function recursive_escape(&$value) { if (is_array($value)) array_map('recursive_escape', $value); else $value = mysql_escape_string($value); } usage array_map('recursive_escape', $_POST); ---------------------For encoding Get variables-------------------------------------- function nkode($k) { if ( is_array( $k ) ) return array_map("base64_encode",$k); else return base64_encode($k); } ---------------------for decoding varaibles from GET--------------------------------- function dkode($k) { if ( is_array( $k ) ) return array_map("base64_decode",$k); else return base64_decode($k); } Usage <a href="somelink.php?pid=<?php echo nkode($someid)?>"> and on next page(somelink.php) $findID=dkode($_GET[pid]); date convert to mm/dd/yyyy to yyyy-mm-dd( if we use date datatype in mysql) and also change into mm/dd/yyyy to disply on page function dateconvert($date,$func) { if ($func == 1){ //insert conversion list($month, $day, $year) = split('[/.-]', $date); $date = "$year-$month-$day"; return $date; } if ($func == 2){ //output conversion list($year, $month, $day) = split('[-.]', $date); $date = "$month/$day/$year"; return $date; } } usage $firstDate=dateconvert($_POST['firstdate'],1); // for insertion in database $showDate=dateconvert($fetch->date_field,2) // to display on browser to clean(sql injection proof) data before doing some action with that variable function cleandata($data) { $success=0; $data=trim($data); $data=strtolower($data); $data=strip_tags($data); return $data; } usage cleandata($_POST[username]); cleandata($_GET[pid]); please share any basic function that must be used , Thanks

  Read the article

• What are those little useful ,customize/enhanced php functions that you wish you knew about 2 years

  - by I Like PHP

  Hello All, i like to work in php bcoz it's just amazing language. please share basic, useful, enhanced and customize function that make things better and easy in php and must be used in our all PHP project, i m sharing some of them please share your customize function that may be useful for everyone alternative/ enhanced print_r() and var_dump() function watch( $what ) { echo '<pre>'; if ( is_array( $what ) ) { print_r ( $what ); } else { var_dump ( $what ); } echo '</pre>'; } usage: 1. watch($_POST); // to see all post variable 2. watch($array); // to see any variable may b array, string or a variable enhanced mysql_escape_string() for multidimensional array to prevent sql injection function recursive_escape(&$value) { if (is_array($value)) array_map('recursive_escape', $value); else $value = mysql_escape_string($value); } usage array_map('recursive_escape', $_POST); ---------------------For encoding Get variables-------------------------------------- function nkode($k) { if ( is_array( $k ) ) return array_map("base64_encode",$k); else return base64_encode($k); } ---------------------for decoding varaibles from GET--------------------------------- function dkode($k) { if ( is_array( $k ) ) return array_map("base64_decode",$k); else return base64_decode($k); } Usage <a href="somelink.php?pid=<?php echo nkode($someid)?>"> and on next page(somelink.php) $findID=dkode($_GET[pid]); date convert to mm/dd/yyyy to yyyy-mm-dd( if we use date datatype in mysql) and also change into mm/dd/yyyy to disply on page function dateconvert($date,$func) { if ($func == 1){ //insert conversion list($month, $day, $year) = split('[/.-]', $date); $date = "$year-$month-$day"; return $date; } if ($func == 2){ //output conversion list($year, $month, $day) = split('[-.]', $date); $date = "$month/$day/$year"; return $date; } } usage $firstDate=dateconvert($_POST['firstdate'],1); // for insertion in database $showDate=dateconvert($fetch->date_field,2) // to display on browser to clean data before doing some action with that variable function cleanID($data) { $success=0; $data=trim($data); $data=strtolower($data); $data=strip_tags($data); return $data; } usage cleanID($_POST[username]); cleanID($_GET[pid]); please share any basic function that must be used , and please give me some suggestion to make above function more better Thanks

  Read the article

• output with "Private`" Content in Mathematica Package

  - by madalina

  Hello everyone, I am trying to solve the following implementation problem in Mathematica 7.0 for some days now and I do not understand exactly what is happening so I hope someone can give me some hints. I have 3 functions that I implemented in Mathematica in a source file with extension *.nb. They are working okay to all the examples. Now I want to put these functions into 3 different packages. So I created three different packages with extension .*m in which I put all the desired Mathematica function. An example in the "stereographic.m" package which contain the code: BeginPackage["stereographic`"] stereographic::usage="The package stereographic...." formEqs::usage="The function formEqs[complexBivPolyEqn..." makePoly::usage="The function makePoly[algebraicEqn] ..." getFixPolys::usage="The function..." milnorFibration::usage="The function..." Begin["Private`"] Share[]; formEqs[complex_,{m_,n_}]:=Block[{complexnew,complexnew1, realeq, imageq, expreal, expimag, polyrealF, polyimagF,s,t,u,v,a,b,c,epsilon,x,y,z}, complexnew:=complex/.{m->s+I*t,n->u+I*v}; complexnew1:=complexnew/.{s->(2 a epsilon)/(1+a^2+b^2+c^2),t->(2 b epsilon)/(1+a^2+b^2+c^2),u->(2 c epsilon)/(1+a^2+b^2+c^2),v->(- epsilon+a^2 epsilon+b^2 epsilon+c^2 epsilon)/(1+a^2+b^2+c^2)}; realeq:=ComplexExpand[Re[complexnew1]]; imageq:=ComplexExpand[Im[complexnew1]]; expreal:=makePoly[realeq]; expimag:=makePoly[imageq]; polyrealF:=expreal/.{a->x,b->y,c->z}; polyimagF:=expimag/.{a->x,b->y,c->z}; {polyrealF,polyimagF} ] End[] EndPackage[] Now to test the function I load the package Needs["stereographic`"] everything is okay. But when I test the function for example with formEqs[x^2-y^2,{x,y}] I get the following ouput: {Private`epsilon^2 + 2 Private`x^2 Private`epsilon^2 + Private`x^4 Private`epsilon^2 - 6 Private`y^2 Private`epsilon^2 + 2 Private`x^2 Private`y^2 Private`epsilon^2 + Private`y^4 Private`epsilon^2 - 6 Private`z^2 Private`epsilon^2 + 2 Private`x^2 Private`z^2 Private`epsilon^2 + 2 Private`y^2 Private`z^2 Private`epsilon^2 + Private`z^4 Private`epsilon^2, 8 Private`x Private`y Private`epsilon^2 + 4 Private`z Private`epsilon^2 - 4 Private`x^2 Private`z Private`epsilon^2 - 4 Private`y^2 Private`z Private`epsilon^2 - 4 Private`z^3 Private`epsilon^2} Of course I do not understand why Private` appears in front of any local variable which I returned in the final result. I would want not to have this Private` in the computed output. Any idea or better explanations which could indicate me why this happens? Thank you very much for your help. Best wishes, madalina

  Read the article

• SQLAuthority News – Android Efficiency Tips and Tricks – Personal Technology Tip #003

  - by pinaldave

  I use my phone for lots of things.  I use it mainly to replace my tablet – I can e-mail, take and edit photos, and do almost everything I can do on a laptop with this phone.  And I am sure that there are many of you out there just like me.  I personally have a Galaxy S3, which uses the Android operating system, and I have decided to feature it as the third installment of my Technology Tips and Tricks series. 1) Shortcut to your favorite contacts on home screen Access your most-called contacts easily from your home screen by holding your finger on any empty spot on the home screen.  A menu will pop up that allows you to choose Shortcuts, and Contact.  You can scroll through your contact list and then just tap on the name of the person you want to be able to dial with a single click. 2) Keep track of your data usage Yes, we all should keep a close eye on our data usage, because it is very easy to go over our limits and then end up with a giant bill at the end of the month.  Never get surprised when you open that mobile phone envelope again.  Go to Settings, then Data Usage, and you can find a quick rundown of your usage, how much data each app uses, and you can even set alarms to let you know when you are nearing the limits.   Better yet, you can set the phone to stop using data when it reaches a certain limit. 3) Bring back Good Grammar We often hear proclamations about the downfall of written language, and how texting abbreviations, misspellings, and lack of punctuation are the root of all evil.  Well, we can show all those doomsdayers that all is not lost by bringing punctuation back to texting.  Usually we leave it off when we text because it takes too long to get to the screen with all the punctuation options.  But now you can hold down the period (or “full stop”) button and a list of all the commonly-used punctuation marks will pop right up. 4) Apps, Apps, Apps and Apps And finally, I cannot end an article about smart phones without including a list of my favorite apps.  Here are a list of my Top 10 Applications on my Android (not counting social media apps). Advanced Task Killer – Keeps my phone snappy by closing un-necessary apps WhatsApp - my favorite alternate to Text SMS Flipboard - my ‘timepass’ moments Skype – keeps me close to friends and family GoogleMaps - I am never lost because of this one thing Amazon Kindle – Books my best friends DropBox - My data always safe Pluralsight Player – Learning never stops for me Samsung Kies Air – Connecting Phone to Computer Chrome – Replacing default browser I have not included any social media applications in the above list, but you can be sure that I am linked to Twitter, Facebook, Google+, LinkedIn, and YouTube. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Android, Personal Technology

  Read the article

• SQLAuthority News – Android Efficiency Tips and Tricks – Personal Technology Tip

  - by pinaldave

  I use my phone for lots of things.  I use it mainly to replace my tablet – I can e-mail, take and edit photos, and do almost everything I can do on a laptop with this phone.  And I am sure that there are many of you out there just like me.  I personally have a Galaxy S3, which uses the Android operating system, and I have decided to feature it as the third installment of my Technology Tips and Tricks series. 1) Shortcut to your favorite contacts on home screen Access your most-called contacts easily from your home screen by holding your finger on any empty spot on the home screen.  A menu will pop up that allows you to choose Shortcuts, and Contact.  You can scroll through your contact list and then just tap on the name of the person you want to be able to dial with a single click. 2) Keep track of your data usage Yes, we all should keep a close eye on our data usage, because it is very easy to go over our limits and then end up with a giant bill at the end of the month.  Never get surprised when you open that mobile phone envelope again.  Go to Settings, then Data Usage, and you can find a quick rundown of your usage, how much data each app uses, and you can even set alarms to let you know when you are nearing the limits.   Better yet, you can set the phone to stop using data when it reaches a certain limit. 3) Bring back Good Grammar We often hear proclamations about the downfall of written language, and how texting abbreviations, misspellings, and lack of punctuation are the root of all evil.  Well, we can show all those doomsdayers that all is not lost by bringing punctuation back to texting.  Usually we leave it off when we text because it takes too long to get to the screen with all the punctuation options.  But now you can hold down the period (or “full stop”) button and a list of all the commonly-used punctuation marks will pop right up. 4) Apps, Apps, Apps and Apps And finally, I cannot end an article about smart phones without including a list of my favorite apps.  Here are a list of my Top 10 Applications on my Android (not counting social media apps). Advanced Task Killer – Keeps my phone snappy by closing un-necessary apps WhatsApp - my favorite alternate to Text SMS Flipboard - my ‘timepass’ moments Skype – keeps me close to friends and family GoogleMaps - I am never lost because of this one thing Amazon Kindle – Books my best friends DropBox - My data always safe Pluralsight Player – Learning never stops for me Samsung Kies Air – Connecting Phone to Computer Chrome – Replacing default browser I have not included any social media applications in the above list, but you can be sure that I am linked to Twitter, Facebook, Google+, LinkedIn, and YouTube. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Android, Personal Technology

  Read the article

• Rackspace copy script failure message "java.net.SocketTimeoutException: Read timed out"

  - by user53864

  I am using Rackspace for Ubuntu cloud server. Everyday a script(I guess the script is from rackspace) executes on the cloud servers which copies the backfile to the Rackspace CloudFiles and sends the mail as if the files are copied and I've scheduled the script on the cloud servers. I've no much knowledge of the script and I guess the script is based on Cruise(as I could see build.xml, some jar files ...). Everyday the files are copied to the Rackspace from cloud servers but sometimes don't know why, the files will be copied to Rackspace sending an error failure message or sometimes the files will not be copied and sends the error failure message like the one below. Error while backing up on Station1 on 03/03/2011 04:50 AM and reason for error is java.net.SocketTimeoutException: Read timed out Anybody using Rackspace?, anybody has any fix for this?

  Read the article

• Should I use my ISP's DNS, or Google's 8.8.8.8?

  - by Torben Gundtofte-Bruun

  It seems like a good idea to use Google's public DNS 8.8.8.8 and 8.8.4.4 because it's really fast -- much faster than my own ISP's DNS! -- and probably more reliable, too. That seems like a ridiculously quick win for me, and much easier to remember. Assuming we're not all "tin foil hat" about Google, why shouldn't everybody use Google DNS? Note: I've seen this question, but I don't want a comparison to OpenDNS. This is about everyday use by everyday people in their homes. Update: I seem to have put my hand in a wasps' nest of privacy concerns. I appreciate the issue, but I was expecting a more technology-oriented discussion...

  Read the article

• How do i change the BIOS boot splash screen?

  - by YumYumYum

  I have a Dell PC which has very ugly and bad luck looking Alien face on every boot. I want to change it or disable it forever, but in Bios they do not have any options. How can i change this from my linux Fedora or ArchLinux which is running now? Tried following does not work. ( http://www.pixelbeat.org/docs/bios/ ) ./flashrom -r firmware.old #save current flash ROM just in case ./flashrom -wv firmware.new #write and verify new flash ROM image Also tried: $ cat c.c #include <stdio.h> #include <inttypes.h> #include <netinet/in.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #define lengthof(x) (sizeof(x)/sizeof(x[0])) uint16_t checksum(const uint8_t* data, int len) { uint16_t sum = 0; int i; for (i=0; i<len; i++) sum+=*(data+i); return htons(sum); } void usage(void) { fprintf(stderr,"Usage: therm_limit [0,50,53,56,60,63,66,70]\n"); fprintf(stderr,"Report therm limit of terminal in BIOS\n"); fprintf(stderr,"If temp specifed, it is changed if required.\n"); exit(EXIT_FAILURE); } #define CHKSUM_START 51 #define CHKSUM_END 109 #define THERM_OFFSET 67 #define THERM_SHIFT 0 #define THERM_MASK (0x7 << THERM_SHIFT) #define THERM_OFF 0 uint8_t thermal_limits[]={0,50,53,56,60,63,66,70}; #define THERM_MAX (lengthof(thermal_limits)-1) #define DEV_NVRAM "/dev/nvram" #define NVRAM_MAX 114 uint8_t nvram[NVRAM_MAX]; int main(int argc, char* argv[]) { int therm_request = -1; if (argc>2) usage(); if (argc==2) { if (*argv[1]=='-') usage(); therm_request=atoi(argv[1]); int i; for (i=0; i<lengthof(thermal_limits); i++) if (thermal_limits[i]==therm_request) break; if (i==lengthof(thermal_limits)) usage(); else therm_request=i; } int fd_nvram=open(DEV_NVRAM, O_RDWR); if (fd_nvram < 0) { fprintf(stderr,"Error opening %s [%m]\n", DEV_NVRAM); exit(EXIT_FAILURE); } if (read(fd_nvram, nvram, sizeof(nvram))==-1) { fprintf(stderr,"Error reading %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } uint16_t chksum = *(uint16_t*)(nvram+CHKSUM_END); printf("%04X\n",chksum); exit(0); if (chksum == checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START)) { uint8_t therm_byte = *(uint16_t*)(nvram+THERM_OFFSET); uint8_t therm_status=(therm_byte & THERM_MASK) >> THERM_SHIFT; printf("Current thermal limit: %d°C\n", thermal_limits[therm_status]); if ( (therm_status == therm_request) ) therm_request=-1; if (therm_request != -1) { if (therm_status != therm_request) printf("Setting thermal limit to %d°C\n", thermal_limits[therm_request]); uint8_t new_therm_byte = (therm_byte & ~THERM_MASK) | (therm_request << THERM_SHIFT); *(uint8_t*)(nvram+THERM_OFFSET) = new_therm_byte; *(uint16_t*)(nvram+CHKSUM_END) = checksum(nvram+CHKSUM_START, CHKSUM_END-CHKSUM_START); (void) lseek(fd_nvram,0,SEEK_SET); if (write(fd_nvram, nvram, sizeof(nvram))!=sizeof(nvram)) { fprintf(stderr,"Error writing %s [%m]\n", DEV_NVRAM); close(fd_nvram); exit(EXIT_FAILURE); } } } else { fprintf(stderr,"checksum failed. Aborting\n"); close(fd_nvram); exit(EXIT_FAILURE); } return EXIT_SUCCESS; } $ gcc c.c -o bios # ./bios 16DB

  Read the article

• New spreadsheet accompanying SmartAssembly 6.0 provides statistics for prioritizing bug fixes

  - by Jason Crease

  One problem developers face is how to prioritize the many voices providing input into software bugs. If there is something wrong with a function that is the darling of a particular user, he or she tends to want action - now! The developer's dilemma is how to ascertain that the problem is major or minor, and when it should be addressed. Now there is a new spreadsheet accompanying SmartAssembly that provides exactly that information in an objective manner. This might upset those used to getting their way by being the loudest or pushiest, but ultimately it will ensure that the biggest problems get the priority they deserve. Here's how it works: Feature Usage Reporting (FUR) in SmartAssembly 6.0 provides a wealth of data about how your software is used by its end-users, but in the SmartAssembly UI the data isn't mined to its full extent. The new Excel spreadsheet for FUR extracts statistics from that data and presents them in easy-to-understand forms. I developed the spreadsheet feature in Microsoft Excel, using a fair amount of VBA. The spreadsheet connects directly to the database which stores the feature-usage data, and shows a wide variety of statistics and tables extracted from that data.  You want to know what percentage of users have used the 'Export as XML' button?  No problem.  How popular is v5.3 is compared to v5.1?  There's graphs for that. You need to know whether you have more users in Russia or Brazil? There's a big pie chart for that. I recently witnessed the spreadsheet in use here at Red Gate Software. My bug is exposed as minor While testing new features in .NET Reflector, I found a usability bug in the Refresh button and filed it in the Red Gate bug-tracking system. The bug was labelled "V.NEXT MINOR," which means it would be fixed in the next point release. Although I'm a professional tester, I'm not much different than most software users when they discover a bug that affects them personally: I wanted it fixed immediately. There was an ulterior motive at play here, of course. I would get to see my colleagues put the spreadsheet to work. The Reflector team loaded up the spreadsheet to view the feature-usage statistics that SmartAssembly collected for the refresh button. The resulting statistics showed that only 8% of users have ever pressed the Refresh button, and only 2.6% of sessions involve pressing the button. When Refresh is used, it's only pressed on average 1.6 times a session, with a maximum of 8 times during a session. This was in stark contrast to what I was doing as a conscientious tester: pressing it dozens of times per session. The spreadsheet provides evidence that my bug was a minor one. On to more serious things Based on the solid evidence uncovered by the spreadsheet, the Reflector team concluded that my experience does not represent that of the vast majority of Reflector's recorded users. The Reflector team had ample data to send me back to my desk and keep the bug classified as "V.NEXT MINOR." The team then went back to fixing more serious bugs. If I'm in the shoes of the user, I might not be thoroughly happy, but I cannot deny that the evidence clearly placed me in a very small minority. Next time I'm hoping the spreadsheet will prove that my bug is more important. Find out more about Feature-Usage Reporting here. The spreadsheet is available for free download here.

  Read the article

• Spam bot constantly hitting our site 800-1,000 times a day. Causing loss in sales

  - by akaDanPaul

  For the past 5 months our site has been receiving hits from these 4 sites below; sheratonbd.com newsheraton.com newsheration.com newsheratonltd.com Typically the exact url they come from looks something like this; http://www.newsheraton.com/ClickEarnArea.aspx?loginsession_expiredlogin=85 The spam bot goes to our homepage and stays there for about 1 min and then exist. Luckily we have some pretty beefy servers so it hasn't even come close to overloading our servers yet. Last month I started blocking the IP address's of the spam bots but they seem to keep getting new ones everyday. So far I have blocked over 200 IP address's, below are a few of the ones I have blocked. They all come from Bangladesh. 58.97.238.214 58.97.149.132 180.234.109.108 180.149.31.221 117.18.231.5 117.18.231.12 Since this has been going on for the past 5 months our real site traffic has started to drop, and everyday our orders get lower and lower. Also since these spam bots simply go to our homepage and then leave our bounce rate in analytics has sky rocketed. My questions are; Is it possible that these spam bots are affecting our SEO? 60% of our orders come from natural search, and since this whole thing has started orders have slowly been dropping. What would be the reason someone would want to waste resources in doing this to our site? IP's aren't free and either are domain names, what would be the goal in doing this to us? We have google adwords but don't advertise on extended networks nor advertise in Bangladesh since we don't ship there so they are not making money on adsense. Has anyone experienced anything similar to this? What did you do and what was the final out come?

  Read the article

• How to go about scheduling a task in windows 7 to change wireless connection

  - by Skindeep2366

  This may or not be something that can be done. I cannot find anything on the wireless connection manager built into windows 7 let alone methods for passing params into it. Problem is as follows: I have 2 wireless routers. One provides internet access, the other provides sole access to the local network. Every day at 4am the main system creates a backup in 2 locations. One is a External usb drive, the other is a location on the network. This is all cool if it is remembered to change over to the local network router before leaving. But if it is forgotten the roof will collapse, the walls will burn, and I will be... well you get the idea. Solution: there is already a custom event that fires a automated backup program at 4am everyday. I need someway to force the wireless network to use the correct connection at say 3:58am everyday. Any ideas????

  Read the article

• FTP script download from linux to windows

  - by user53864

  I'm using following FTP script on windows xp to download zip files from ubuntu cloud servers. A zip file is created every day on ubutnu servers and I will download it to windows via this ftp script. I run this script everyday manually as I have to edit the last line(mget /usr/backup_02-11-2010.Zip) of the script to match today's date. I want to edit this script so that it will download only today's zip file at the scheduled time without needing to edit it everyday, when scheduled. It's clear that date is appended to the zip files and is in the format dd-mm-yyyy. Need help... open server-ip-here username-here user-password-here lcd C:\Backup\files bin hash prompt mget /usr/backup_02-11-2010.zip

  Read the article

• Using Content Analytics for More Effective Engagement

  - by Kellsey Ruppel

  Using Content Analytics for More Effective Engagement: Turning High-Volume Content into Templates for Success By Mitchell Palski, Oracle WebCenter Sales Consultant Many organizations use Oracle WebCenter Portal to develop these basic types of portals: Intranet portals used for collaboration, employee self-service, and company communication Extranet portals used by customers and partners for self-service and support Team collaboration portals that allow users to share documents and content, track activity, and engage in discussions Portals are intended to provide a personalized, single point of interaction with web-based applications and information. The user experiences that a Portal is capable of displaying should be relevant to an individual user or class of users (a group or role). The components of a Portal that would vary based on a user’s identity include: Web content such as images, news articles, and on-screen instruction Social tools such as threaded discussions, polls/surveys, and blogs Document management tools to upload, download, and edit files Web applications that present data visualizations and data entry modules These collections of content, tools, and applications make up valuable workspaces. The challenge that a development team may have is defining which combinations are the most effective for its users. No one wants to create and manage a workspace that goes un-used or (even worse) that is used but is ineffective. Oracle WebCenter Portal provides you with the capabilities to not only rapidly develop variations of portals, but also identify which portals are the most effective and should be re-used throughout an enterprise. Capturing Portal AnalyticsOracle WebCenter Portal provides an analytics service that allows administrators and business users to track and analyze portal usage. These analytics are captured in the form of: Usage tracking metrics Behavior tracking User Profile Correlation The out-of-the-box task reports that come with Oracle WebCenter Portal include: WebCenter Portal Traffic Page Traffic Login Metrics Portlet Traffic Portlet Response Time Portlet Instance Traffic Portlet Instance Response Time Search Metrics Document Metrics Wiki Metrics Blog Metrics Discussion Metrics Portal Traffic Portal Response Time By determining the usage and behavior tracking metrics that are associated with specific user profiles (including groups and roles), your administrators will be able to identify the components of your solution that are the most valuable.  Your first step as an administrator should be to identify the specific pages and/or components are used the most frequently. Next, determine the user(s) or user-group(s) that are accessing those high-use elements of a portal. It is also important to determine patterns in high-usage and see if they correlate to a specific schedule. One of the goals of any development team (especially those that are following Agile methodologies) should be to develop reusable web components to minimize redundant development. Oracle WebCenter Portal provides you the tools to capture the successful workspaces that have already been developed and identified so that they can be reused for similar user demographics. Re-using Successful PortalsWhen creating a new Portal in Oracle WebCenter, developers have the option to base that portal on a template that includes: Pre-seeded data such as pages, tools, user roles, and look-and-feel assets Specific sub-sets of page-layouts, tools, and other resources to standardize what is added to a Portal’s pages Any custom components that your team creates during development cycles Once you have identified a successful workspace and its most valuable components, leverage Oracle WebCenter’s ability to turn that custom portal into a portal template. By creating a template from your already successful portal, you are empowering your enterprise by providing a starting point for future initiatives. Your new projects, new teams, and new web pages can benefit from lessons learned and adjustments that have already been made to optimize user experiences instead of starting from scratch. ***For a complete explanation of how to work with Portal Templates, be sure to read the Fusion Middleware documentation available online.

  Read the article

• I.T. Chargeback : Core to Cloud Computing

  - by Anand Akela

  Contributed by Mark McGill Consolidation and Virtualization have been widely adopted over the years to help deliver benefits such as increased server utilization, greater agility and lower cost to the I.T. organization. These are key enablers of cloud, but in themselves they do not provide a complete cloud solution. Building a true enterprise private cloud involves moving from an admin driven world, where the I.T. department is ultimately responsible for the provisioning of servers, databases, middleware and applications, to a world where the consumers of I.T. resources can provision their infrastructure, platforms and even complete application stacks on demand. Switching from an admin-driven provisioning model to a user-driven model creates some challenges. How do you ensure that users provisioning resources will not provision more than they need? How do you encourage users to return resources when they have finished with them so that others can use them? While chargeback has existed as a concept for many years (especially in mainframe environments), it is the move to this self-service model that has created a need for a new breed of chargeback applications for cloud. Enabling self-service without some form of chargeback is like opening a shop where all of the goods are free. A successful chargeback solution will be able to allocate the costs of shared I.T. infrastructure based on the relative consumption by the users. Doing this creates transparency between the I.T. department and the consumers of I.T. When users are able to understand how their consumption translates to cost they are much more likely to be prudent when it comes to their use of I.T. resources. This also gives them control of their I.T. costs, as moderate usage will translate to a lower charge at the end of the month. Implementing Chargeback successfully create a win-win situation for I.T. and the consumers. Chargeback can help to ensure that I.T. resources are used for activities that deliver business value. It also improves the overall utilization of I.T. infrastructure as I.T. resources that are not needed are not left running idle. Enterprise Manager 12c provides an integrated metering and chargeback solution for Enterprise Manager Targets. This solution is built on top of the rich configuration and utilization information already available in Enterprise Manager. It provides metering not just for virtual machines, but also for physical hosts, databases and middleware. Enterprise Manager 12c provides metering based on the utilization and configuration of the following types of Enterprise Manager Target: Oracle VM Host Oracle Database Oracle WebLogic Server Using Enterprise Manager Chargeback, administrators are able to create a set of Charge Plans that are used to attach prices to the various metered resources. These plans can contain fixed costs (eg. $10/month/database), configuration based costs (eg. $10/month if OS is Windows) and utilization based costs (eg. $0.05/GB of Memory/hour) The self-service user provisioning these resources is then able to view a report that details their usage and helps them understand how this usage translates into cost. Armed with this information, the user is able to determine if the resources are delivering adequate business value based on what is being charged. Figure 1: Chargeback in Self-Service Portal Enterprise Manager 12c provides a variety of additional interfaces into this data. The administrator can access summary and trending reports. Summary reports allow the administrator to drill-down through the cost center hierarchy to identify, for example, the top resource consumers across the organization. Figure 2: Charge Summary Report Trending reports can be used for I.T. planning and budgeting as they show utilization and charge trends over a period of time. Figure 3: CPU Trend Report We also provide chargeback reports through BI Publisher. This provides a way for users who do not have an Enterprise Manager login (such as Line of Business managers) to view charge and usage information. For situations where a bill needs to be produced, chargeback can be integrated with billing applications such as Oracle Billing and Revenue Management (BRM). Further information on Enterprise Manager 12c’s integrated metering and chargeback: White Paper Screenwatch Cloud Management on OTN

  Read the article

• How can one find software development work that involves directly the final end user?

  - by RJa

  I've worked in software development for 15 years and, while there have been signficant personal achievements and a lot of experience, I've always felt detached from the man/woman-on-the-street, the every day person, how it affects their lives, in a number of ways: the technologies: embedded software, hidden away, stuff not seen by the everyday person. Or process technology supporting manufactured products the size of the systems, meaning many jobs, divided up, work is abstract, not one person can see the whole picture the organisations: large, with departments dealing with different areas, the software, the hardware, the marketing, the sales, the customer support the locations and hours: out-of-town business parks away from the rest of society, fixed locations, inflexible: 9-5 everyday This to me seems typical of the companies I worked for and see elsewhere. Granted, there are positives such as the technology itself and usually being among high calibre co-workers, but the above points frustrate me about the industry because they detach the work from its meaning. How can one: change these things in an existing job, or compensate for them? find other work that avoids these and connects with the final end user? Job designs tend to focus on the job content and technical requirements rather than how the job aims to fulfil end user needs, is meaningful.

  Read the article

• Server Requirement and Cost for an android Application [duplicate]

  - by CagkanToptas

  This question already has an answer here: How do you do load testing and capacity planning for web sites? 3 answers Can you help me with my capacity planning? 2 answers I am working on a project which is an android application. For my project proposal, I need to calculate what is my server requirements to overcome the traffic I explained below? and if possible, I want to learn what is approximate cost of such server? I am giving the maximum expected values for calculation : -Database will be in mysql (Average service time of DB is 100-110ms in my computer[i5,4GB Ram]) -A request will transfer 150Kb data for each request on average. -Total user count : 1m -Active user count : 50k -Estimated request/sec for 1 active user : 0.06 -Total expected request/second to the server = ~5000 I am expecting this traffic between 20:00-1:00 everyday and then this values will decrease to 1/10 rest of the day. Is there any solution to this? [e.g increasing server capacity in a specific time period everyday to reduce cost]

  Read the article

• High Load mysql on Debian server stops every day. Why?

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ? I'm already try mysqltuner and tunung-primer.sh , but they marked all green. Mysqltuner output mysqltuner >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.24-9-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 112G (Tables: 1528) [--] Data in InnoDB tables: 39G (Tables: 340) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 344 -------- Performance Metrics ------------------------------------------------- [--] Up for: 8h 18m 33s (14M q [478.333 qps], 259K conn, TX: 9B, RX: 5B) [--] Reads / Writes: 84% / 16% [--] Total buffers: 10.5G global + 81.1M per thread (200 max threads) [OK] Maximum possible memory usage: 26.3G (83% of installed RAM) [OK] Slow queries: 1% (259K/14M) [!!] Highest connection usage: 100% (201/200) [OK] Key buffer size / total MyISAM indexes: 1.5G/5.6G [OK] Key buffer hit rate: 100.0% (6B cached / 1M reads) [OK] Query cache efficiency: 74.3% (8M cached / 11M selects) [OK] Query cache prunes per day: 0 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 247K sorts) [!!] Joins performed without indexes: 106025 [!!] Temporary tables created on disk: 49% (351K on disk / 715K total) [OK] Thread cache hit rate: 99% (249 created / 259K connections) [!!] Table cache hit rate: 15% (2K open / 13K opened) [OK] Open file limit used: 15% (3K/20K) [OK] Table locks acquired immediately: 99% (4M immediate / 4M locks) [!!] InnoDB data size / buffer pool: 39.4G/5.9G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce or eliminate persistent connections to reduce connection usage Adjust your join queries to always utilize indexes Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Variables to adjust: max_connections (> 200) wait_timeout (< 600) interactive_timeout (< 600) join_buffer_size (> 5.0M, or always use indexes with joins) table_cache (> 10000) innodb_buffer_pool_size (>= 39G) Mysql primer output -- MYSQL PERFORMANCE TUNING PRIMER -- - By: Matthew Montgomery - MySQL Version 5.5.24-9-log x86_64 Uptime = 0 days 8 hrs 20 min 50 sec Avg. qps = 478 Total Questions = 14369568 Threads Connected = 16 Warning: Server has not been running for at least 48hrs. It may not be safe to use these recommendations To find out more information on how each of these runtime variables effects performance visit: http://dev.mysql.com/doc/refman/5.5/en/server-system-variables.html Visit http://www.mysql.com/products/enterprise/advisors.html for info about MySQL's Enterprise Monitoring and Advisory Service SLOW QUERIES The slow query log is enabled. Current long_query_time = 1.000000 sec. You have 260626 out of 14369701 that take longer than 1.000000 sec. to complete Your long_query_time seems to be fine BINARY UPDATE LOG The binary update log is enabled Binlog sync is not enabled, you could loose binlog records during a server crash WORKER THREADS Current thread_cache_size = 50 Current threads_cached = 45 Current threads_per_sec = 0 Historic threads_per_sec = 0 Your thread_cache_size is fine MAX CONNECTIONS Current max_connections = 200 Current threads_connected = 11 Historic max_used_connections = 201 The number of used connections is 100% of the configured maximum. You should raise max_connections INNODB STATUS Current InnoDB index space = 214 M Current InnoDB data space = 39.40 G Current InnoDB buffer pool free = 0 % Current innodb_buffer_pool_size = 5.85 G Depending on how much space your innodb indexes take up it may be safe to increase this value to up to 2 / 3 of total system memory MEMORY USAGE Max Memory Ever Allocated : 23.46 G Configured Max Per-thread Buffers : 15.84 G Configured Max Global Buffers : 7.54 G Configured Max Memory Limit : 23.39 G Physical Memory : 31.40 G Max memory limit seem to be within acceptable norms KEY BUFFER Current MyISAM index space = 5.61 G Current key_buffer_size = 1.47 G Key cache miss rate is 1 : 5578 Key buffer free ratio = 77 % Your key_buffer_size seems to be fine QUERY CACHE Query cache is enabled Current query_cache_size = 200 M Current query_cache_used = 101 M Current query_cache_limit = 50 M Current Query cache Memory fill ratio = 50.59 % Current query_cache_min_res_unit = 4 K MySQL won't cache query results that are larger than query_cache_limit in size SORT OPERATIONS Current sort_buffer_size = 64 M Current read_rnd_buffer_size = 256 K Sort buffer seems to be fine JOINS Current join_buffer_size = 5.00 M You have had 106606 queries where a join could not use an index properly You have had 8 joins without keys that check for key usage after each row join_buffer_size >= 4 M This is not advised You should enable "log-queries-not-using-indexes" Then look for non indexed joins in the slow query log. OPEN FILES LIMIT Current open_files_limit = 20210 files The open_files_limit should typically be set to at least 2x-3x that of table_cache if you have heavy MyISAM usage. Your open_files_limit value seems to be fine TABLE CACHE Current table_open_cache = 10000 tables Current table_definition_cache = 2000 tables You have a total of 1910 tables You have 2151 open tables. The table_cache value seems to be fine TEMP TABLES Current max_heap_table_size = 2.92 G Current tmp_table_size = 2.92 G Of 366426 temp tables, 49% were created on disk Perhaps you should increase your tmp_table_size and/or max_heap_table_size to reduce the number of disk-based temporary tables Note! BLOB and TEXT columns are not allow in memory tables. If you are using these columns raising these values might not impact your ratio of on disk temp tables. TABLE SCANS Current read_buffer_size = 3 M Current table scan ratio = 2846 : 1 read_buffer_size seems to be fine TABLE LOCKING Current Lock Wait ratio = 1 : 185 You may benefit from selective use of InnoDB. If you have long running SELECT's against MyISAM tables and perform frequent updates consider setting 'low_priority_updates=1'

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >