Search Results

Search found 1470 results on 59 pages for 'hangs'.

Page 57/59 | < Previous Page | 53 54 55 56 57 58 59  | Next Page >

• Need a fast programming language that can drive two printers

  - by Pete

  I have a rather unusual application that isn't working the way I need, and I hope someone here will have some suggestions or at least a direction to investigate. We have a museum exhibit that has a computer at the entrance driving two small receipt printers. There are two buttons on a console, wired to the left and right buttons of a disemboweled mouse. The two printers and associated buttons are for girls and boys, each button does a random selection from a database of names and prints a small ticket on the appropriate printer with a graphic image, a few words about the exhibit and the randomly chosen name. Conceptually all is well, but it hangs quite often. I got the project at the last minute, because the original designer got bogged down and couldn't deliver, so the exhibit's author asked me the day before opening, whether I could write something that would work. I did it in Word, since I am an experienced VBA programmer. Several other avenues I attempted first all lead to dead ends - one couldn't do graphics, another couldn't handle two printers, yet another couldn't change fonts and so on. The problem is that it simply isn't fast enough - Word can only drive one printer at a time and changing the active printer takes a long time. Not by office standards, where a second or two of delay before a printer starts working on your document is not an issue, but here I need more or less instant response. If kids press a button and nothing happens, they press it over and over until something does happen, resulting in maybe half a dozen commands being sent before the printer starts reacting. Sometimes it jams the program completely, since boys and girls will be pressing the two buttons simultaneously and Word locks up, and even when it doesn't jam, the printers then spit out a stream of tickets, making a mess. The kids start squabbling over which ticket is whose, pulling them out of the printers, snarling the paper tape, jamming the printer and generally making a mess of the whole affair, often necessitating the exhibit caretakers having to restart the computer and clear torn bits of paper out the printers. What I need is some sort of fast programming language that can drive two printers *-simultaneously-*, not the MSOffice claptrap of having to switch the active printer, that can react to both left and right mouse button click events, can print a small graphic image and can print in different font sizes and styles and. I don't need many, but it's not all in one typeface. Can anyone suggest what I might use for this? I don't even know if it's possible at all under Windows, whether the "single active printer" garbage is an Office artifact, or a Windows restriction. My little Commodore-64 twenty-five years ago had two printers attached to it and drove both simultaneously with no difficulties - it doesn't seem to me it should be such an impossible requirement today.

  Read the article

• Problem with continue in While Loop within Try/Catch in C# (2.0)

  - by csharpnoob

  Hi, when i try to use in my ASPX Webpage in the Code Behind this try{ while() { ... db.Open(); readDataMoney = new OleDbCommand("SELECT * FROM Customer WHERE card = '" + customer.card + "';", db).ExecuteReader(); while (readDataMoney.Read()) { try { if (!readDataMoney.IsDBNull(readDataMoney.GetOrdinal("Credit"))) { customer.credit = Convert.ToDouble(readDataMoney[readDataMoney.GetOrdinal("Credit")]); } if (!readDataMoney.IsDBNull(readDataMoney.GetOrdinal("Bonus"))) { customer.bonus = Convert.ToDouble(readDataMoney[readDataMoney.GetOrdinal("Bonus")]); } } catch (Exception ex) { Connector.writeLog("Money: " + ex.StackTrace + "" + ex.Message + "" + ex.Source); customer.credit = 0.0; customer.credit = 0.0; continue; } finally { } } readDataMoney.Close(); vsiDB.Close(); ... } }catch { continue; } The whole page hangs if there is a problem when the read from db isn't working. I tried to check for !isNull, but same problem. I have a lots of differend MDB Files to process, which are readonly (can't repair/compact) and some or others not. Same Design/Layout of Tables. With good old ASP Classic 3.0 all of them are processing with the "On Resume Next". I know I know. But that's how it is. Can't change the source. So the basic question: So is there any way to tell .NET to continue the loop whatever happens within the try loop if there is any exception? After a lots of wating time i get this exceptions: at System.Data.Common.UnsafeNativeMethods.IDBInitializeInitialize.Invoke(IntPtr pThis) at System.Data.OleDb.DataSourceWrapper.InitializeAndCreateSession(OleDbConnectionString constr, SessionWrapper& sessionWrapper) at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.OleDb.OleDbConnection.Open() at GetCustomer(String card)Thread was being aborted.System.Data and System.Runtime.InteropServices.Marshal.ReadInt16(IntPtr ptr, Int32 ofs) System.Data.ProviderBase.DbBuffer.ReadInt16(Int32 offset) System.Data.OleDb.ColumnBinding.Value_I2() System.Data.OleDb.ColumnBinding.Value() System.Data.OleDb.OleDbDataReader.GetValue(Int32 ordinal) System.Data.OleDb.OleDbDataReader.get_Item(Int32 index) Thread was terminated.mscorlib Thanks for any help.

  Read the article

• Problem Executing Async Web Request

  - by davidhayes

  Hi Can anyone tell me what I've done wrong with this simple code? When I run it it hangs on using (Stream postStream = request.EndGetRequestStream(asynchronousResult)) If I comment out the requestState.Wait.WaitOne(); line the code executes correctly but obviously doesn't wait for the response. I'm guessing the the call to EndGetRequestStream is somehow returning me to the context of the main thread?? I'm pretty sure my code is essentially the same as the sample though (MSDN Documentation) using System; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Ink; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.IO; using System.Text; namespace SBRemoteClient { public class JSONClient { public string ExecuteJSONQuery(string url, string query) { System.Uri uri = new Uri(url); HttpWebRequest request = (HttpWebRequest)WebRequest.Create(uri); request.Method = "POST"; request.Accept = "application/json"; byte[] requestBytes = Encoding.UTF8.GetBytes(query); RequestState requestState = new RequestState(request, requestBytes); IAsyncResult resultRequest = request.BeginGetRequestStream(new AsyncCallback(GetRequestStreamCallback), requestState); requestState.Wait.WaitOne(); IAsyncResult resultResponse = (IAsyncResult)request.BeginGetResponse(new AsyncCallback(GetResponseStreamCallback), requestState); requestState.Wait.WaitOne(); return requestState.Response; } private static void GetRequestStreamCallback(IAsyncResult asynchronousResult) { try { RequestState requestState = (RequestState)asynchronousResult.AsyncState; HttpWebRequest request = requestState.Request; using (Stream postStream = request.EndGetRequestStream(asynchronousResult)) { postStream.Write(requestState.RequestBytes, 0, requestState.RequestBytes.Length); } requestState.Wait.Set(); } catch (Exception e) { Console.Out.WriteLine(e); } } private static void GetResponseStreamCallback(IAsyncResult asynchronousResult) { RequestState requestState = (RequestState)asynchronousResult.AsyncState; HttpWebRequest request = requestState.Request; using (HttpWebResponse response = (HttpWebResponse)request.EndGetResponse(asynchronousResult)) { using (Stream responseStream = response.GetResponseStream()) { using (StreamReader streamRead = new StreamReader(responseStream)) { requestState.Response = streamRead.ReadToEnd(); requestState.Wait.Set(); } } } } } }

  Read the article

• SOAP WCF Webservice behaves differently when called locally or remotely

  - by Idriss

  I have a WCF SOAP 1.1 Webservice with the configuration specified below. A concurrent call to any method of this endpoint hangs until the other returns when called remotely (from another computer on the network). I cannot replicate this when these methods are called locally (with a client located on the same machine). I tried to increase the maxConcurrentCalls with no luck ... the service behavior seems to be different according to the client local/remote location. Any guess? Thanks, <?xml version="1.0" encoding="utf-8"?> <configuration> <system.serviceModel> <services> <service behaviorConfiguration="MyCustomBehavior" name="CONTOSO.CONTOSOServerApi.IContosoServiceApiImplV1"> <endpoint address="" binding="customBinding" bindingConfiguration="WebBinding" bindingNamespace="http://contoso.com" contract="CONTOSO.CONTOSOServerApiInterfaceV1.IContosoServiceApiV1" /> </service> </services> <behaviors> <serviceBehaviors> <behavior name="MyCustomBehavior"> <serviceMetadata httpGetEnabled="true" httpGetUrl="http://localhost:8080/MyEndPointV1" /> <serviceDebug httpHelpPageEnabled="false" includeExceptionDetailInFaults="true" /> <serviceThrottling maxConcurrentSessions="10000" maxConcurrentCalls="1000"/> <dataContractSerializer maxItemsInObjectGraph="2147483647" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <customBinding> <binding name="WebBinding"> <textMessageEncoding messageVersion="Soap11" maxReadPoolSize="2147483647" maxWritePoolSize="2147483647"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> </textMessageEncoding> <httpsTransport /> </binding> </customBinding> </bindings> </system.serviceModel> </configuration>

  Read the article

• Mysql select - improve performances

  - by realshadow

  Hey, I am working on an e-shop which sells products only via loans. I display 10 products per page in any category, each product has 3 different price tags - 3 different loan types. Everything went pretty well during testing time, query execution time was perfect, but today when transfered the changes to the production server, the site "collapsed" in about 2 minutes. The query that is used to select loan types sometimes hangs for ~10 seconds and it happens frequently and thus it cant keep up and its hella slow. The table that is used to store the data has approximately 2 milion records and each select looks like this: SELECT * FROM products_loans WHERE KOD IN("X17/Q30-10", "X17/12", "X17/5-24") AND 369.27 BETWEEN CENA_OD AND CENA_DO; 3 loan types and the price that needs to be in range between CENA_OD and CENA_DO, thus 3 rows are returned. But since I need to display 10 products per page, I need to run it trough a modified select using OR, since I didnt find any other solution to this. I have asked about it here, but got no answer. As mentioned in the referencing post, this has to be done separately since there is no column that could be used in a join (except of course price and code, but that ended very, very badly). Here is the show create table, kod and CENA_OD/CENA_DO very indexed via INDEX. CREATE TABLE `products_loans` ( `KOEF_ID` bigint(20) NOT NULL, `KOD` varchar(30) NOT NULL, `AKONTACIA` int(11) NOT NULL, `POCET_SPLATOK` int(11) NOT NULL, `koeficient` decimal(10,2) NOT NULL default '0.00', `CENA_OD` decimal(10,2) default NULL, `CENA_DO` decimal(10,2) default NULL, `PREDAJNA_CENA` decimal(10,2) default NULL, `AKONTACIA_SUMA` decimal(10,2) default NULL, `TYP_VYHODY` varchar(4) default NULL, `stage` smallint(6) NOT NULL default '1', PRIMARY KEY (`KOEF_ID`), KEY `CENA_OD` (`CENA_OD`), KEY `CENA_DO` (`CENA_DO`), KEY `KOD` (`KOD`), KEY `stage` (`stage`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 And also selecting all loan types and later filtering them trough php doesnt work good, since each type has over 50k records and the select takes too much time as well... Any ides about improving the speed are appreciated. Edit: Here is the explain +----+-------------+----------------+-------+---------------------+------+---------+------+--------+-------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+----------------+-------+---------------------+------+---------+------+--------+-------------+ | 1 | SIMPLE | products_loans | range | CENA_OD,CENA_DO,KOD | KOD | 92 | NULL | 190158 | Using where | +----+-------------+----------------+-------+---------------------+------+---------+------+--------+-------------+ I have tried the combined index and it improved the performance on the test server from 0.44 sec to 0.06 sec, I cant access the production server from home though, so I will have to try it tomorrow.

  Read the article

• SQL Native Client 10 Performance miserable (due to server-side cursors)

  - by namezero

  we have an application that uses ODBC via CDatabase/CRecordset in MFC (VS2010). We have two backends implemented. MSSQL and MySQL. Now, when we use MSSQL (with the Native Client 10.0), retrieving records with SELECT is dramatically slow via slow links (VPN, for example). The MySQL ODBC driver does not exhibit this nasty behavior. For example: CRecordset r(&m_db); r.Open(CRecordset::snapshot, L"SELECT a.something, b.sthelse FROM TableA AS a LEFT JOIN TableB AS b ON a.ID=b.Ref"); r.MoveFirst(); while(!r.IsEOF()) { // Retrieve CString strData; crs.GetFieldValue(L"a.something", strData); crs.MoveNext(); } Now, with the MySQL driver, everything runs as it should. The query is returned, and everything is lightning fast. However, with the MSSQL Native Client, things slow down, because on every MoveNext(), the driver communicates with the server. I think it is due to server-side cursors, but I didn't find a way to disable them. I have tried using: ::SQLSetConnectAttr(m_db.m_hdbc, SQL_ATTR_ODBC_CURSORS, SQL_CUR_USE_ODBC, SQL_IS_INTEGER); But this didn't help either. There are still long-running exec's to sp_cursorfetch() et al in SQL Profiler. I have also tried a small reference project with SQLAPI and bulk fetch, but that hangs in FetchNext() for a long time, too (even if there is only one record in the resultset). This however only happens on queries with LEFT JOINS, table-valued functions, etc. Note that the query doesn't take that long - executing the same SQL via SQL Studio over the same connection returns in a reasonable time. Question1: Is is possible to somehow get the native client to "cache" all results locally use local cursors in a similar fashion as the MySQL driver seems to do it? Maybe this is the wrong approach altogether, but I'm not sure how else to do this. All we want is to retrieve all data at once from a SELECT, then never talk the server again until the next query. We don't care about recordset updates, deletes, etc or any of that nonsense. We only want to retrieve data. We take that recordset, get all the data, and delete it. Question2: Is there a more efficient way to just retrieve data in MFC with ODBC?

  Read the article

• SSH new connection begins to hang (not reject or terminate) after a day or so on Ubuntu 13.04 server

  - by kross

  Recently we upgraded the server from 12.04 LTS server to 13.04. All was well, including after a reboot. With all packages updated we began to see a strange issue, ssh works for a day or so (unclear on timing) then a later request for SSH hangs (cannot ctrl+c, nothing). It is up and serving webserver traffic etc. Port 22 is open (ips etc altered slightly for posting): nmap -T4 -A x.acme.com Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-12 16:01 CDT Nmap scan report for x.acme.com (69.137.56.18) Host is up (0.026s latency). rDNS record for 69.137.56.18: c-69-137-56-18.hsd1.tn.provider.net Not shown: 998 filtered ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 6.1p1 Debian 4 (protocol 2.0) | ssh-hostkey: 1024 54:d3:e3:38:44:f4:20:a4:e7:42:49:d0:a7:f1:3e:21 (DSA) | 2048 dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 (RSA) |_256 45:69:10:79:5a:9f:0b:f0:66:15:39:87:b9:a1:37:f7 (ECDSA) 80/tcp open http Jetty 7.6.2.v20120308 | http-title: Log in as a Bamboo user - Atlassian Bamboo |_Requested resource was http://x.acme.com/userlogin!default.action;jsessionid=19v135zn8cl1tgso28fse4d50?os_destination=%2Fstart.action Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 12.89 seconds Here is the ssh -vvv: ssh -vvv x.acme.com OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012 debug1: Reading configuration data /Users/tfergeson/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to x.acme.com [69.137.56.18] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/Users/tfergeson/.ssh/id_rsa" as a RSA1 public key debug1: identity file /Users/tfergeson/.ssh/id_rsa type 1 debug1: identity file /Users/tfergeson/.ssh/id_rsa-cert type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 130/256 debug2: bits set: 503/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "69.137.56.18" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:6 debug3: load_hostkeys: loaded 1 keys debug1: Host 'x.acme.com' is known and matches the RSA host key. debug1: Found key in /Users/tfergeson/.ssh/known_hosts:10 debug2: bits set: 493/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/tfergeson/.ssh/id_rsa (0x7ff189c1d7d0) debug2: key: /Users/tfergeson/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/tfergeson/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug3: sign_and_send_pubkey: RSA 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). Authenticated to x.acme.com ([69.137.56.18]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: fd 3 setting TCP_NODELAY debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ATLAS_OPTS debug3: Ignored env rvm_bin_path debug3: Ignored env TERM_PROGRAM debug3: Ignored env GEM_HOME debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env CLICOLOR debug3: Ignored env IRBRC debug3: Ignored env TMPDIR debug3: Ignored env Apple_PubSub_Socket_Render debug3: Ignored env TERM_PROGRAM_VERSION debug3: Ignored env MY_RUBY_HOME debug3: Ignored env TERM_SESSION_ID debug3: Ignored env USER debug3: Ignored env COMMAND_MODE debug3: Ignored env rvm_path debug3: Ignored env COM_GOOGLE_CHROME_FRAMEWORK_SERVICE_PROCESS/USERS/tfergeson/LIBRARY/APPLICATION_SUPPORT/GOOGLE/CHROME_SOCKET debug3: Ignored env JPDA_ADDRESS debug3: Ignored env APDK_HOME debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env Apple_Ubiquity_Message debug3: Ignored env __CF_USER_TEXT_ENCODING debug3: Ignored env rvm_sticky_flag debug3: Ignored env MAVEN_OPTS debug3: Ignored env LSCOLORS debug3: Ignored env rvm_prefix debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env JAVA_HOME debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env JPDA_TRANSPORT debug3: Ignored env rvm_version debug3: Ignored env M2_HOME debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env rvm_ruby_string debug3: Ignored env LOGNAME debug3: Ignored env M2_REPO debug3: Ignored env GEM_PATH debug3: Ignored env AWS_RDS_HOME debug3: Ignored env rvm_delete_flag debug3: Ignored env EC2_PRIVATE_KEY debug3: Ignored env RUBY_VERSION debug3: Ignored env SECURITYSESSIONID debug3: Ignored env EC2_CERT debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 I can hard reboot (only mac monitors at that location) and it will again be accessible. This now happens every single time. It is imperative that I get it sorted. The strange thing is that it behaves initially then starts to hang after several hours. I perused logs previously and nothing stood out. From the auth.log, I can see that it has allowed me in, but still I get nothing back on the client side: Sep 20 12:47:50 cbear sshd[25376]: Accepted publickey for tfergeson from 10.1.10.14 port 54631 ssh2 Sep 20 12:47:50 cbear sshd[25376]: pam_unix(sshd:session): session opened for user tfergeson by (uid=0) UPDATES: Still occurring even after setting UseDNS no and commenting out #session optional pam_mail.so standard noenv This does not appear to be a network/dns related issue, as all services running on the machine are as responsive and accessible as ever, with the exception of sshd. Any thoughts on where to start?

  Read the article

• MVC 3 AdditionalMetadata Attribute with ViewBag to Render Dynamic UI

  - by Steve Michelotti

  A few months ago I blogged about using Model metadata to render a dynamic UI in MVC 2. The scenario in the post was that we might have a view model where the questions are conditionally displayed and therefore a dynamic UI is needed. To recap the previous post, the solution was to use a custom attribute called [QuestionId] in conjunction with an “ApplicableQuestions” collection to identify whether each question should be displayed. This allowed me to have a view model that looked like this: 1: [UIHint("ScalarQuestion")] 2: [DisplayName("First Name")] 3: [QuestionId("NB0021")] 4: public string FirstName { get; set; } 5: 6: [UIHint("ScalarQuestion")] 7: [DisplayName("Last Name")] 8: [QuestionId("NB0022")] 9: public string LastName { get; set; } 10: 11: [UIHint("ScalarQuestion")] 12: [QuestionId("NB0023")] 13: public int Age { get; set; } 14: 15: public IEnumerable<string> ApplicableQuestions { get; set; } At the same time, I was able to avoid repetitive IF statements for every single question in my view: 1: <%: Html.EditorFor(m => m.FirstName, new { applicableQuestions = Model.ApplicableQuestions })%> 2: <%: Html.EditorFor(m => m.LastName, new { applicableQuestions = Model.ApplicableQuestions })%> 3: <%: Html.EditorFor(m => m.Age, new { applicableQuestions = Model.ApplicableQuestions })%> by creating an Editor Template called “ScalarQuestion” that encapsulated the IF statement: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> 2: <%@ Import Namespace="DynamicQuestions.Models" %> 3: <%@ Import Namespace="System.Linq" %> 4: <% 5: var applicableQuestions = this.ViewData["applicableQuestions"] as IEnumerable<string>; 6: var questionAttr = this.ViewData.ModelMetadata.ContainerType.GetProperty(this.ViewData.ModelMetadata.PropertyName).GetCustomAttributes(typeof(QuestionIdAttribute), true) as QuestionIdAttribute[]; 7: string questionId = null; 8: if (questionAttr.Length > 0) 9: { 10: questionId = questionAttr[0].Id; 11: } 12: if (questionId != null && applicableQuestions.Contains(questionId)) { %> 13: <div> 14: <%: Html.Label("") %> 15: <%: Html.TextBox("", this.Model)%> 16: </div> 17: <% } %> You might want to go back and read the full post in order to get the full context. MVC 3 offers a couple of new features that make this scenario more elegant to implement. The first step is to use the new [AdditionalMetadata] attribute which, so far, appears to be an under appreciated new feature of MVC 3. With this attribute, I don’t need my custom [QuestionId] attribute anymore - now I can just write my view model like this: 1: [UIHint("ScalarQuestion")] 2: [DisplayName("First Name")] 3: [AdditionalMetadata("QuestionId", "NB0021")] 4: public string FirstName { get; set; } 5:   6: [UIHint("ScalarQuestion")] 7: [DisplayName("Last Name")] 8: [AdditionalMetadata("QuestionId", "NB0022")] 9: public string LastName { get; set; } 10:   11: [UIHint("ScalarQuestion")] 12: [AdditionalMetadata("QuestionId", "NB0023")] 13: public int Age { get; set; } Thus far, the documentation seems to be pretty sparse on the AdditionalMetadata attribute. It’s buried in the Other New Features section of the MVC 3 home page and, after showing the attribute on a view model property, it just says, “This metadata is made available to any display or editor template when a product view model is rendered. It is up to you to interpret the metadata information.” But what exactly does it look like for me to “interpret the metadata information”? Well, it turns out it makes the view much easier to work with. Here is the re-implemented ScalarQuestion template updated for MVC 3 and Razor: 1: @{ 2: object questionId; 3: ViewData.ModelMetadata.AdditionalValues.TryGetValue("QuestionId", out questionId); 4: if (ViewBag.applicableQuestions.Contains((string)questionId)) { 5: <div> 6: @Html.LabelFor(m => m) 7: @Html.TextBoxFor(m => m) 8: </div> 9: } 10: } So we’ve gone from 17 lines of code (in the MVC 2 version) to about 7-8 lines of code here. The first thing to notice is that in MVC 3 we now have a property called “AdditionalValues” that hangs off of the ModelMetadata property. This is automatically populated by any [AdditionalMetadata] attributes on the property. There is no more need for me to explicitly write Reflection code to GetCustomAttributes() and then check to see if those attributes were present. I can just call TryGetValue() on the dictionary to see if they were present. Secondly, the “applicableQuestions” anonymous type that I passed in from the calling view – in MVC 3 I now have a dynamic ViewBag property where I can just “dot into” the applicableQuestions with a nicer syntax than dictionary square bracket syntax. And there’s no problems calling the Contains() method on this dynamic object because at runtime the DLR has resolved that it is a generic List<string>. At this point you might be saying that, yes the view got much nicer than the MVC 2 version, but my view model got slightly worse.  In the previous version I had a nice [QuestionId] attribute but now, with the [AdditionalMetadata] attribute, I have to type the string “QuestionId” for every single property and hope that I don’t make a typo. Well, the good news is that it’s easy to create your own attributes that can participate in the metadata’s additional values. The key is that the attribute must implement that IMetadataAware interface and populate the AdditionalValues dictionary in the OnMetadataCreated() method: 1: public class QuestionIdAttribute : Attribute, IMetadataAware 2: { 3: public string Id { get; set; } 4:   5: public QuestionIdAttribute(string id) 6: { 7: this.Id = id; 8: } 9:   10: public void OnMetadataCreated(ModelMetadata metadata) 11: { 12: metadata.AdditionalValues["QuestionId"] = this.Id; 13: } 14: } This now allows me to encapuslate my “QuestionId” string in just one place and get back to my original attribute which can be used like this: [QuestionId(“NB0021”)]. The [AdditionalMetadata] attribute is a powerful and under-appreciated new feature of MVC 3. Combined with the dynamic ViewBag property, you can do some really interesting things with your applications with less code and ceremony.

  Read the article

• iptables not allowing mysql connections to aliased ips?

  - by Curtis

  I have a fairly simple iptables firewall on a server that provides MySQL services, but iptables seems to be giving me very inconsistent results. The default policy on the script is as follows: iptables -P INPUT DROP I can then make MySQL public with the following rule: iptables -A INPUT -p tcp --dport 3306 -j ACCEPT With this rule in place, I can connect to MySQL from any source IP to any destination IP on the server without a problem. However, when I try to restrict access to just three IPs by replacing the above line with the following, I run into trouble (xxx=masked octect): iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.184 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.196 -j ACCEPT iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.XXX.XXX.251 -j ACCEPT Once the above rules are in place, the following happens: I can connect to the MySQL server from the .184, .196 and .251 hosts just fine as long as am connecting to the MySQL server using it's default IP address or an IP alias in the same subnet as the default IP address. I am unable to connect to MySQL using IP aliases that are assigned to the server from a different subnet than the server's default IP when I'm coming from the .184 or .196 hosts, but .251 works just fine. From the .184 or .196 hosts, a telnet attempt just hangs... # telnet 209.xxx.xxx.22 3306 Trying 209.xxx.xxx.22... If I remove the .251 line (making .196 the last rule added), the .196 host still can not connect to MySQL using IP aliases (so it's not the order of the rules that is causing the inconsistent behavior). I know, this particular test was silly as it shouldn't matter what order these three rules are added in, but I figured someone might ask. If I switch back to the "public" rule, all hosts can connect to the MySQL server using either the default or aliased IPs (in either subnet): iptables -A INPUT -p tcp --dport 3306 -j ACCEPT The server is running in a CentOS 5.4 OpenVZ/Proxmox container (2.6.32-4-pve). And, just in case you prefer to see the problem rules in the context of the iptables script, here it is (xxx=masked octect): # Flush old rules, old custom tables /sbin/iptables --flush /sbin/iptables --delete-chain # Set default policies for all three default chains /sbin/iptables -P INPUT DROP /sbin/iptables -P FORWARD DROP /sbin/iptables -P OUTPUT ACCEPT # Enable free use of loopback interfaces /sbin/iptables -A INPUT -i lo -j ACCEPT /sbin/iptables -A OUTPUT -o lo -j ACCEPT # All TCP sessions should begin with SYN /sbin/iptables -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Accept inbound TCP packets (Do this *before* adding the 'blocked' chain) /sbin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow the server's own IP to connect to itself /sbin/iptables -A INPUT -i eth0 -s 208.xxx.xxx.178 -j ACCEPT # Add the 'blocked' chain *after* we've accepted established/related connections # so we remain efficient and only evaluate new/inbound connections /sbin/iptables -N BLOCKED /sbin/iptables -A INPUT -j BLOCKED # Accept inbound ICMP messages /sbin/iptables -A INPUT -p ICMP --icmp-type 8 -j ACCEPT /sbin/iptables -A INPUT -p ICMP --icmp-type 11 -j ACCEPT # ssh (private) /sbin/iptables -A INPUT -p tcp --dport 22 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # ftp (private) /sbin/iptables -A INPUT -p tcp --dport 21 -m state --state NEW -s xxx.xxx.xxx.xxx -j ACCEPT # www (public) /sbin/iptables -A INPUT -p tcp --dport 80 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 443 -j ACCEPT # smtp (public) /sbin/iptables -A INPUT -p tcp --dport 25 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 2525 -j ACCEPT # pop (public) /sbin/iptables -A INPUT -p tcp --dport 110 -j ACCEPT # mysql (private) /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.184 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.196 -j ACCEPT /sbin/iptables -A INPUT -p tcp --dport 3306 -m state --state NEW -s 208.xxx.xxx.251 -j ACCEPT Any ideas? Thanks in advance. :-)

  Read the article

• What to Do When Windows Won’t Boot

  - by Chris Hoffman

  You turn on your computer one day and Windows refuses to boot — what do you do? “Windows won’t boot” is a common symptom with a variety of causes, so you’ll need to perform some troubleshooting. Modern versions of Windows are better at recovering from this sort of thing. Where Windows XP might have stopped in its tracks when faced with this problem, modern versions of Windows will try to automatically run Startup Repair. First Things First Be sure to think about changes you’ve made recently — did you recently install a new hardware driver, connect a new hardware component to your computer, or open your computer’s case and do something? It’s possible the hardware driver is buggy, the new hardware is incompatible, or that you accidentally unplugged something while working inside your computer. The Computer Won’t Power On At All If your computer won’t power on at all, ensure it’s plugged into a power outlet and that the power connector isn’t loose. If it’s a desktop PC, ensure the power switch on the back of its case — on the power supply — is set to the On position. If it still won’t power on at all, it’s possible you disconnected a power cable inside its case. If you haven’t been messing around inside the case, it’s possible the power supply is dead. In this case, you’ll have to get your computer’s hardware fixed or get a new computer. Be sure to check your computer monitor — if your computer seems to power on but your screen stays black, ensure your monitor is powered on and that the cable connecting it to your computer’s case is plugged in securely at both ends. The Computer Powers On And Says No Bootable Device If your computer is powering on but you get a black screen that says something like “no bootable device” or another sort of “disk error” message, your computer can’t seem to boot from the hard drive that Windows was installed on. Enter your computer’s BIOS or UEFI firmware setup screen and check its boot order setting, ensuring that it’s set to boot from its hard drive. If the hard drive doesn’t appear in the list at all, it’s possible your hard drive has failed and can no longer be booted from. In this case, you may want to insert Windows installation or recovery media and run the Startup Repair operation. This will attempt to make Windows bootable again. For example, if something overwrote your Windows drive’s boot sector, this will repair the boot sector. If the recovery environment won’t load or doesn’t see your hard drive, you likely have a hardware problem. Be sure to check your BIOS or UEFI’s boot order first if the recovery environment won’t load. You can also attempt to manually fix Windows boot loader problems using the fixmbr and fixboot commands. Modern versions of Windows should be able to fix this problem for you with the Startup Repair wizard, so you shouldn’t actually have to run these commands yourself. Windows Freezes or Crashes During Boot If Windows seems to start booting but fails partway through, you may be facing either a software or hardware problem. If it’s a software problem, you may be able to fix it by performing a Startup Repair operation. If you can’t do this from the boot menu, insert a Windows installation disc or recovery disk and use the startup repair tool from there. If this doesn’t help at all, you may want to reinstall Windows or perform a Refresh or Reset on Windows 8. If the computer encounters errors while attempting to perform startup repair or reinstall Windows, or the reinstall process works properly and you encounter the same errors afterwards, you likely have a hardware problem. Windows Starts and Blue Screens or Freezes If Windows crashes or blue-screens on you every time it boots, you may be facing a hardware or software problem. For example, malware or a buggy driver may be loading at boot and causing the crash, or your computer’s hardware may be malfunctioning. To test this, boot your Windows computer in safe mode. In safe mode, Windows won’t load typical hardware drivers or any software that starts automatically at startup. If the computer is stable in safe mode, try uninstalling any recently installed hardware drivers, performing a system restore, and scanning for malware. If you’re lucky, one of these steps may fix your software problem and allow you to boot Windows normally. If your problem isn’t fixed, try reinstalling Windows or performing a Refresh or Reset on Windows 8. This will reset your computer back to its clean, factory-default state. If you’re still experiencing crashes, your computer likely has a hardware problem. Recover Files When Windows Won’t Boot If you have important files that will be lost and want to back them up before reinstalling Windows, you can use a Windows installer disc or Linux live media to recover the files. These run entirely from a CD, DVD, or USB drive and allow you to copy your files to another external media, such as another USB stick or an external hard drive. If you’re incapable of booting a Windows installer disc or Linux live CD, you may need to go into your BIOS or UEFI and change the boot order setting. If even this doesn’t work — or if you can boot from the devices and your computer freezes or you can’t access your hard drive — you likely have a hardware problem. You can try pulling the computer’s hard drive, inserting it into another computer, and recovering your files that way. Following these steps should fix the vast majority of Windows boot issues — at least the ones that are actually fixable. The dark cloud that always hangs over such issues is the possibility that the hard drive or another component in the computer may be failing. Image Credit: Karl-Ludwig G. Poggemann on Flickr, Tzuhsun Hsu on Flickr     

  Read the article

• Kernel Mode Rootkit

  - by Pajarito

  On the other 3 computers in my family, I believe that we have a kernel-mode rootkit for windows. It appears that the same rootkit is on all of them. We think. We changed all the important passwords from my computer, running linux right now. On all of the infected computers is Symantic Endpoint Protection, because it's free from the university where my mom and dad work. In my opinion symantec is a piece of crap, seeing as it didn't even manager to delete the tracking cookies it found when I tried it on my own computer. The Computers and their set-ups: Computer A: Vista Business; symantec antivirus. runs it as admin, no password. IE8. no other security software other than what comes with windows. IE8 security settings the default Computer B: XP Home Premium; symantec antivirus. runs as normal user, no password, admin account with weak password, spybot, uses IE8 with default settings, sometimes Firefox Computer C: XP Home Premium; symantec antivirus. runs as normal user, no password, admin account with weak password, uses IE8 with default settings, no other security programs except what came with windows This is what's happening. Cut and pasted from my dad's forum post. -- When I scanned my laptop (Dell XPS M1330 with Windows Vista Small Business), Symantec Endpoint Protection hangs for a while, perhaps 10 seconds or so, on some of the following files 9129837.exe, hide_evr2.sys, VirusRemoval.vbs, NewVirusRemoval.vbs, dll.dll, alsmt.ext, and _epnt.sys. It does this if a run a scan that I set up to run on a new thumbnail drive and it does this even if the thumbnail is not plugged in. It doesn't seem to do this if I scan only the C: drive. I've check for problems with symantec endpoint protection and also with Microsoft Security Essentials and Malwarebytes Anti-Malware. They found nothing and I can't find anything by searching for hidden files. Next I tried microsoft's rootkitrevealer. It (rootkitrevealer) finds 279660 (or so) discrepancies and the interface is so glitchy after that I can't really figure out what is going on. The screen is squirrely. The rootkitrevealer pulls up many files in the folder \programdata\applicationdata and there are numberous appended \applicationdata on the end of that as well. -- As you can see, what we did was install MSE and MBAM and scan with both of them. Nothing but a tracking cookie. Then I took over and ran rootkitrevealer.exe from MicroSoft from a flash drive. It found a bunch of discrepancies, but only about 20 or so where security related, the rest being files that you just couldn't see from Windows Explorer. I couldn't see whether of not the files list above, the ones that the scan was hanging on, where in the list. The other thing is, I have no idea what to do about the things the scan comes up with. Then we checked the other computers and they do the same thing when you scan with Symantec. The people at the university seen to think that dad might not have a virus, but 2 of the computers slowed down noticably AND IE8 started acting all funny. None of my family is very computer oriented, and 2 of the possible causes for the rootkit are: -My dad bought a new flash drive, which shipped with a data security executable on it -My dad has to download lots of articles for his work Those are the only things that stand out, but it could have been anything. We are currently backing up our data, and I'll post again after trying IceSword 1.22. I just looked at my dad's forum topic, and someone recommended GMER. I'll try that too.

  Read the article

• Determining cause of high NFS/IO utilization without iotop

  - by Matt

  I have a server that is doing an NFSv4 export for user's home directories. There are roughly 25 users (mostly developers/analysts) and about 40 servers mounting the home directory export. Performance is miserable, with users often seeing multi-second lags for simple commands (like ls, or writing a small text file). Sometimes the home directory mount completely hangs for minutes, with users getting "permission denied" errors. The hardware is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for the home directories. What I find curious, and suspicious, is that the sda device often has very high utilization, even though it only contains the OS. I would expect this virtual drive to be idle almost all the time. The system is not swapping, according to "free" and "vmstat". Why would there be major load on this device? Here is a 30-second snapshot from iostat: Time: 09:37:28 AM Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 44.09 0.03 107.76 0.13 607.40 11.27 0.89 8.27 7.27 78.35 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 44.09 0.03 107.76 0.13 607.40 11.27 0.89 8.27 7.27 78.35 sdb 0.00 2616.53 0.67 157.88 2.80 11098.83 140.04 8.57 54.08 4.21 66.68 sdb1 0.00 2616.53 0.67 157.88 2.80 11098.83 140.04 8.57 54.08 4.21 66.68 dm-0 0.00 0.00 0.03 151.82 0.13 607.26 8.00 1.25 8.23 5.16 78.35 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-2 0.00 0.00 0.67 2774.84 2.80 11099.37 8.00 474.30 170.89 0.24 66.84 dm-3 0.00 0.00 0.67 2774.84 2.80 11099.37 8.00 474.30 170.89 0.24 66.84 Looks like iotop is the ideal tool to use to sniff out these kinds of issues. But I'm on CentOS 5.6, which doesn't have a new enough kernel to support that program. I looked at Determining which process is causing heavy disk I/O?, and besides iotop, one of the suggestions said to do a "echo 1 /proc/sys/vm/block_dump". I did that (after directing kernel messages to tempfs). In about 13 minutes I had about 700k reads or writes, roughly half from kjournald and the other half from nfsd: # egrep " kernel: .*(READ|WRITE)" messages | wc -l 768439 # egrep " kernel: kjournald.*(READ|WRITE)" messages | wc -l 403615 # egrep " kernel: nfsd.*(READ|WRITE)" messages | wc -l 314028 For what it's worth, for the last hour, utilization has constantly been over 90% for the home directory drive. My 30-second iostat keeps showing output like this: Time: 09:36:30 PM Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 6.46 0.20 11.33 0.80 71.71 12.58 0.24 20.53 14.37 16.56 sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 sda2 0.00 6.46 0.20 11.33 0.80 71.71 12.58 0.24 20.53 14.37 16.56 sdb 137.29 7.00 549.92 3.80 22817.19 43.19 82.57 3.02 5.45 1.74 96.32 sdb1 137.29 7.00 549.92 3.80 22817.19 43.19 82.57 3.02 5.45 1.74 96.32 dm-0 0.00 0.00 0.20 17.76 0.80 71.04 8.00 0.38 21.21 9.22 16.57 dm-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 dm-2 0.00 0.00 687.47 10.80 22817.19 43.19 65.48 4.62 6.61 1.43 99.81 dm-3 0.00 0.00 687.47 10.80 22817.19 43.19 65.48 4.62 6.61 1.43 99.82

  Read the article

• Cannot ping Localhost so I can't shutdown Tomcat

  - by gav

  Hi, I installed Tomcat 6 using the tar-ball via wget. Startup of the server is fine but on shutdown I get a timeout exception. root@88:/usr/local/tomcat/logs# /usr/local/tomcat/bin/shutdown.sh Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local/tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: /usr Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar 30-Mar-2010 17:33:41 org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection timed out at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) ... I read that this might be because I have a firewall blocking incoming connections on the shutdown port (8005). I have a default Ubuntu 9.04 installation running on a VPS with no rules in my iptables. How can I tell if that port is blocked? How can I check that the server is listening for connections on 8005? Bizarrely pinging localhost or the IP of my server fails from the server itself, whereas pinging the IP of my server from another machine succeeds. -------- EDIT -------- (In reply to Davey) Thanks for all the tips and suggestions! netstat -nlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:8005 0.0.0.0:* LISTEN 9611/java tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 28505/mysqld tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN 9611/java tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN ... So we can see that tomcat is listening, I just don't seem to be able to reach it. root@88:/usr/local/tomcat# telnet localhost 8005 Trying 127.0.0.1... Trying to telnet to the port Hangs indefinitely. I have no rules in my iptables so I don't think it's a firewall thing. root@88:/usr/local/tomcat# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination This is the contents of /etc/hosts 127.0.0.1 localhost.localdomain localhost # Auto-generated hostname. Please do not remove this comment. 88.198.31.14 88.198.31.14 88 88 But I still can't ping localhost... do I need to check a loopback device is enabled properly or something? (I'm unsure how to do that if you do say yes :)). root@88:/usr/local/tomcat# ping localhost PING localhost (127.0.0.1) 56(84) bytes of data. --- localhost ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 5999ms Trying to find out what the loop back is configured as; root@88:~# ifconfig lo lo Link encap:Local Loopback LOOPBACK MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) SOLUTION THANKS TO DAVEY I needed to bring up the interface (Not sure why it wasn't running). ifconfig lo up did the trick. root@88:~# ifconfig lo up root@88:~# ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@88:~# ping localhost PING localhost.localdomain (127.0.0.1) 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=64 time=0.025 ms Thanks again, Gav

  Read the article

• Exchange 2003-Exchange 2010 post migration GAL/OAB problem

  - by user68726

  I am very new to Exchange so forgive my newbie-ness. I've exhausted Google trying to find a way to solve my problem so I'm hoping some of you gurus can shed some light on my next steps. Please forgive my bungling around through this. The problem I cannot download/update the Global Address List (GAL) and Offline Address Book (OAB) on my Outlook 2010 clients. I get: Task 'emailaddress' reported error (0x8004010F) : 'The operation failed. An object cannot be found.' ---- error. I'm using cached exchange mode, which if I turn off Outlook hangs completely from the moment I start it up. (Note I've replaced my actual email address with 'emailaddress') Background information I migrated mailboxes, public store, etc. from a Small Business Server 2003 with Exchange 2003 box to a Server 2008 R2 with Exchange 2010 based primarily on an experts exchange how to article. The exchange server is up and running as an internet facing exchange server with all of the roles necessary to send and receive mail and in that capacity is working fine. I "thought" I had successfully migrated everything from the SBS03 box, and due to huge amounts of errors in everything from AD to the Exchange install itself I removed the reference to the SBS03 server in adsiedit. I've still got access to the old SBS03 box, but as I said the number of errors in everything is preventing even the uninstall of Exchange (or the starting of the Exchange Information Store service), so I'm quite content to leave that box completely out of the picture while trying to solve my problem. After research I discovered this is most likely because I failed to run the “update-globaladdresslist” (or get / update) command from the Exchange shell before I removed the Exchange 2003 server from adsiedit (and the network). If I run the command now it gives me: WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Offline Address Book - first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Schedule+ Free Busy Information – first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameArchive" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameContacts" is invalid and couldn't be updated. (Note that I’ve replaced my domain with “domainname.com” and my organization name with “containername”) What I’ve tried I don’t want to use the old OAB, or GAL, I don’t care about either, our GAL and distribution lists needed to be organized anyway, so at this point I really just want to get rid of the old reference to the “first administrative group” and move on. I’ve tried to create a new GAL and tell Exchange 2010 to use that GAL instead of the old GAL, but I'm obviously missing some of the commands or something dumb I need to do to start over with a blank slate/GAL/OAB. I'm very tempted to completely delete the entire "first administrative group" tree from adsiedit and see if that gets rid of the ridiculous reference that no longer exists but I dont want to break something else. Commands run to try to create a new GAL and tell exch10 to use that GAL: New-globaladdresslist –name NAMEOFNEWGAL Set-globaladdresslist GUID –name NAMEOFNEWGAL This did nothing for me except now when I run get-globaladdresslist or with the | FL pipe I see two GALs listed, the “default global address list” and the “NAMEOFNEWGAL” that I created. After a little more research this morning it looks like you can't change/delete/remove the default address list, and the only way to do what I'm trying to do would be to maybe remove the default address list via adsiedit and recreate with a command something like new-GlobalAddressList -Name "Default Global Address List" -IncludedRecipients AllRecipients. This would be acceptable but I've searched and searched and can't find instructions or a breakdown of where exactly the default GAL lives in AD, and if I'd have to remove multiple child references/records. ** Of interest** I'm getting an event ID 9337 in my application log OALGen did not find any recipients in address list ‘\Global Address List. This offline address list will not be generated. -\NAMEOFMYOAB --------- on my Exchange 2010 box, which pretty much to me seems to confirm my suspicion that the empty GAL/OAB is what's causing the Outlook client 0x8004010F error. Help please!

  Read the article

• PC: Quick Freeze, then BSOD, then forced reboot, then freezes again

  - by cr0z3r

  Lately I have been experiencing a weird issue. My PC will hang for a second and then BSOD - it stays there, so I have to reboot. Once Windows starts again and I'm logged in, after 1-10min it freezes again, this time without BSOD. RECAP: 1 second freeze BSOD, hangs there I have to force-reboot Once PC rebooted, I log back into Windows second freeze between a 1-10min range, no BSOD (alternatively, I get a freeze with a constant sound/noise, no BSOD) I contacted my PC provider, who told me my graphics-card might be flawed (Quadro 4000), so I used a Quadro 2000 that they lend me. The issue still occurred. The issue now seemed to belong to a flawed RAM module. Following my provider's steps, I removed all but the first from the left column and kept using my PC for a week or so without any issues. I then added the bottom-right module, and so on, until all modules were back inside - I had no problems. Now it seemed that a simple take-out-put-back-in of the RAM modules had fixed the issue. However, after a few months, the issue was back. I redid all the RAM-swapping I had done before, and concluded that the lower-right module was flawed. My provider changed it for another, and everything was great until now. My PC froze again for barely a second, hanged on a BSOD, I rebooted it, logged-in to Windows to get a freeze (without BSOD or reboot) 40 seconds later. Something worth noting, is that every time I reboot after the BSOD, it is something within Chrome that freezes my PC (e.g. this time I clicked the "restore" button as Chrome mentioned it had exited unexpectedly - from the previous freeze obviously - and it instantly froze). Finally, the Event Viewer lists 2 critical events in the past hour as "ID: 41, Type: Kernel-Power". PC-Specs: http://i.imgur.com/VZpbr.jpg Previous Dump-files: https://dl.dropbox.com/u/716600/DumpFiles_08_2012.zip I would like to thank anybody in advance for your help. You're great. UPDATE 1: I realized that I did not mention an awkward fact about this issue. After I have gotten the 1-sec freeze followed by a BSOD, after I rebooted because the BSOD hanged, and after I logged back in to get another (this time, eternal) freeze and rebooted once again, the PC does not boot back up. The power-light is on, but my monitor says "no signal", as if the PC wouldn't really be turned on. This truly seems a like a power-related issue, doesn't it? UPDATE 2: I just got a freeze, but without BSOD. My screen froze (while on Chrome, which is starting to seem suspicious to me) with an ongoing sound/noise. I had to force-reboot my PC. I would say this is a graphics-card issue, but this issue also happened when I was using the Quadro 2000 from my provider. UPDATE 3: I just got a BSOD while trying to render something (quite heavy, actually) in 3ds Max 2012. I left the BSOD "running", as it said it was writing dump files to disk. However, the percentage number stayed at 0, so after 15 minutes I force-rebooted. I then used the software WhoCrashed (thank you Dave) which reported the following from the C:\Windows\Memory.dmp file: On Thu 22.11.2012 22:13:45 GMT your computer crashed crash dump file: C:\Windows\memory.dmp uptime: 01:05:27 This was probably caused by the following module: Unknown () Bugcheck code: 0x124 (0x0, 0xFFFFFA80275AC028, 0xF200001F, 0x100B2) Error: WHEA_UNCORRECTABLE_ERROR Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: Unknown . Google query: Unknown WHEA_UNCORRECTABLE_ERROR

  Read the article

• ASP.NET MVC JavaScript Routing

  - by zowens

  Have you ever done this sort of thing in your ASP.NET MVC view? The weird thing about this isn’t the alert function, it’s the code block containing the Url formation using the ASP.NET MVC UrlHelper. The terrible thing about this experience is the obvious lack of IntelliSense and this ugly inline JavaScript code. Inline JavaScript isn’t portable to other pages beyond the current page of execution. It is generally considered bad practice to use inline JavaScript in your public-facing pages. How ludicrous would it be to copy and paste the entire jQuery code base into your pages…? Not something you’d ever consider doing. The problem is that your URLs have to be generated by ASP.NET at runtime and really can’t be copied to your JavaScript code without some trickery. How about this? Does the hard-coded URL bother you? It really bothers me. The typical solution to this whole routing in JavaScript issue is to just hard-code your URLs into your JavaScript files and call it done. But what if your URLs change? You have to now go an track down the places in JavaScript and manually replace them. What if you get the pattern wrong? Do you have tests around it? This isn’t something you should have to worry about.   The Solution To Our Problems The solution is to port routing over to JavaScript. Does that sound daunting to you? It’s actually not very hard, but I decided to create my own generator that will do all the work for you. What I have created is a very basic port of the route formation feature of ASP.NET routing. It will generate the formatted URLs based on your routing patterns. Here’s how you’d do this: Does that feel familiar? It looks a lot like something you’d do inside of your ASP.NET MVC views… but this is inside of a JavaScript file… just a plain ol’ .js file.  Your first question might be why do you have to have that “.toUrl()” thing. The reason is that I wanted to make POST and GET requests dead simple. Here’s how you’d do a POST request (and the same would work with a GET request):   The first parameter is extra data passed to the post request and the second parameter is a function that handles the success of the POST request. If you’re familiar with jQuery’s Ajax goodness, you’ll know how to use it. (if not, check out http://api.jquery.com/jQuery.Post/ and the parameters are essentially the same). But we still haven’t gotten rid of the magic strings. We still have controller names and action names represented as strings. This is going to blow your mind… If you’ve seen T4MVC, this will look familiar. We’re essentially doing the same sort of thing with my JavaScript router, but we’re porting the concept to JavaScript. The good news is that parameters to the controllers are directly reflected in the action function, just like T4MVC. And the even better news… IntlliSense is easily transferred to the JavaScript version if you’re using Visual Studio as your JavaScript editor. The additional data parameter gives you the ability to pass extra routing data to the URL formatter.   About the Magic You may be wondering how this all work. It’s actually quite simple. I’ve built a simple jQuery pluggin (called routeManager) that hangs off the main jQuery namespace and routes all the URLs. Every time your solution builds, a routing file will be generated with this pluggin, all your route and controller definitions along with your documentation. Then by the power of Visual Studio, you get some really slick IntelliSense that is hard to live without. But there are a few steps you have to take before this whole thing is going to work. First and foremost, you need a reference to the JsRouting.Core.dll to your projects containing controllers or routes. Second, you have to specify your routes in a bit of a non-standard way. See, we can’t just pull routes out of your App_Start in your Global.asax. We force you to build a route source like this: The way we determine the routes is by pulling in all RouteSources and generating routes based upon the mapped routes. There are various reasons why we can’t use RouteCollection (different post for another day)… but in this case, you get the same route mapping experience. Converting the RouteSource to a RouteCollection is trivial (there’s an extension method for that). Next thing you have to do is generate a documentation XML file. This is done by going to the project settings, going to the build tab and clicking the checkbox. (this isn’t required, but nice to have). The final thing you need to do is hook up the generation mechanism. Pop open your project file and look for the AfterBuild step. Now change the build step task to look like this: The “PathToOutputExe” is the path to the JsRouting.Output.exe file. This will change based on where you put the EXE. The “PathToOutputJs” is a path to the output JavaScript file. The “DicrectoryOfAssemblies” is a path to the directory containing controller and routing DLLs. The JsRouting.Output.exe executable pulls in all these assemblies and scans them for controllers and route sources.   Now that wasn’t too bad, was it :)   The State of the Project This is definitely not complete… I have a lot of plans for this little project of mine. For starters, I need to look at the generation mechanism. Either I will be creating a utility that will do the project file manipulation or I will go a different direction. I’d like some feedback on this if you feel partial either way. Another thing I don’t support currently is areas. While this wouldn’t be too hard to support, I just don’t use areas and I wanted something up quickly (this is, after all, for a current project of mine). I’ll be adding support shortly. There are a few things that I haven’t covered in this post that I will most certainly be covering in another post, such as routing constraints and how these will be translated to JavaScript. I decided to open source this whole thing, since it’s a nice little utility I think others should really be using. Currently we’re using ASP.NET MVC 2, but it should work with MVC 3 as well. I’ll upgrade it as soon as MVC 3 is released. Along those same lines, I’m investigating how this could be put on the NuGet feed. Show me the Bits! OK, OK! The code is posted on my GitHub account. Go nuts. Tell me what you think. Tell me what you want. Tell me that you hate it. All feedback is welcome! https://github.com/zowens/ASP.NET-MVC-JavaScript-Routing

  Read the article

• ssh authentication nfs

  - by user40135

  Hi all I would like to do ssh from machine "ub0" to another machine "ub1" without using passwords. I setup using nfs on "ub0" but still I am asked to insert a password. Here is my scenario: * machine ub0 and ub1 have the same user "mpiu", with same pwd, same userid, and same group id * the 2 servers are sharing a folder that is the HOME directory for "mpiu" * I did a chmod 700 on the .ssh * I created a key using ssh-keygene -t dsa * I did "cat id_dsa.pub authorized_keys". On this last file I tried also chmod 600 and chmod 640 * off course I can guarantee that on machine ub1 the user "shared_user" can see the same fodler that wes mounted with no problem. Below the content of my .ssh folder Code: authorized_keys id_dsa id_dsa.pub known_hosts After all of this calling wathever function "ssh ub1 hostname" I am requested my password. Do you know what I can try? I also UNcommented in the ssh_config file for both machines this line IdentityFile ~/.ssh/id_dsa I also tried ssh -i $HOME/.ssh/id_dsa mpiu@ub1 Below the ssh -vv Code: OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 OpenSSH_5.1p1 Debian-3ubuntu1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ub1 [192.168.2.9] port 22. debug1: Connection established. debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /mirror/mpiu/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version lshd-2.0.4 lsh - a GNU ssh debug1: no match: lshd-2.0.4 lsh - a GNU ssh debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-3ubuntu1 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,spki-sign-rsa debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: aes256-cbc,3des-cbc,blowfish-cbc,arcfour debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: hmac-sha1,hmac-md5 debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: none,zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server-client 3des-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client-server 3des-cbc hmac-md5 none debug2: dh_gen_key: priv key bits set: 183/384 debug2: bits set: 1028/2048 debug1: sending SSH2_MSG_KEXDH_INIT debug1: expecting SSH2_MSG_KEXDH_REPLY debug1: Host 'ub1' is known and matches the RSA host key. debug1: Found key in /mirror/mpiu/.ssh/known_hosts:1 debug2: bits set: 1039/2048 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /mirror/mpiu/.ssh/id_dsa (0xb874b098) debug1: Authentications that can continue: password,publickey debug1: Next authentication method: publickey debug1: Offering public key: /mirror/mpiu/.ssh/id_dsa debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: password,publickey debug2: we did not send a packet, disable method debug1: Next authentication method: password mpiu@ub1's password: I hangs here!

  Read the article

• Strange Upload Problem on Hyper-V

  - by Ring0

  Hi, This one is driving me totally nuts. I have being trying to upload a file to www.virustotal.com (its a harmless exe I have since found out - DiskWipe.exe from diskwipe.org). Using IE8. From Win 7 and Win 2008 R2 Datacenter (which I select to boot from vhd's) onto my main machine hardware, and also on another Win 7 PC elsewhere on my network, when I upload the file to virustotal.com it works perfectly. So, using my native NIC's everything is fine. Using another machine also perfect. Right. OK, from my boot menu the default is my main development machine - the one I'm typing on now. This runs on the metal and has Hyper-V role and I have some guests. All guests are not running. Amazingly, from my console (root partition to be exact) or any guest OS 2003 /XP / 2008 R2 etc. My upload to virustotal.com slows at 32% then HANGS at 38.something% & never finishes!! Here is the kicker. I have another box (my main server) running Hyper-V on the metal and three live guests. Identical H/W to my main dev machine in another room. (Except OS is Datacenter - Mine is Enterprise). If I try and upload from its bare metal console or any guest this file to virustotal.com using IE8 it stops exactly in the same place!! As for "steps I have tried etc." are kind-of blown out of the water as my server box is doing the precise same thing as the machine in my room here. OK, comonalities: Mobo: Gigabyte GA-X58-UD5, 12GB Kingston RAM, Corei7 920 4 cores hyperthreading = 8 & Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC's. All 3 machines have this same motherboard - revision F11 Bios, all have 12GB RAM, all have the Realtek Nic's. All x64 by the way as I mentioned before I have a Win 7 box also with the UD5 m/Board, 12 GB RAM - bit of an overkill. :-) All these machines when NOT running Hyper-V can upload this file. Perhaps you may like to try it on a Hyepr-v (2008 R2) yourselves with IE8 and the desktop experience is on. See if it works or fails for you. Root OS or any guest. So, looking like its the NIC + Hyper-V = Cannot upload this file (any file I must add.) Realtek Nic is Ver 7.002.1125.2008. Using IE8 I see in the nic settings there are the usual parameters for Jumbo frames / Checksum offloading etc. several others. Should I fiddle with these? I ran Netmon 3.3 in a guest and the TCP session halted as the upload failed. I suppose I could study that further. I dont have Netmon on the root partition machine (yet)! All OS's fully patched - including todays defender files. My box running Office 2007 - but identical server in another room is not. Also, if I fire up a VPN to a distant client and do the upload it works! Of course its a different network path. Suggestions welcome please. If I left out anything important - please yell at me. Many Thanks,

  Read the article

• Exchange 2003-Exchange 2010 post migration GAL/OAB problem

  - by user68726

  I am very new to Exchange so forgive my newbie-ness. I've exhausted Google trying to find a way to solve my problem so I'm hoping some of you gurus can shed some light on my next steps. Please forgive my bungling around through this. The problem I cannot download/update the Global Address List (GAL) and Offline Address Book (OAB) on my Outlook 2010 clients. I get: Task 'emailaddress' reported error (0x8004010F) : 'The operation failed. An object cannot be found.' ---- error. I'm using cached exchange mode, which if I turn off Outlook hangs completely from the moment I start it up. (Note I've replaced my actual email address with 'emailaddress') Background information I migrated mailboxes, public store, etc. from a Small Business Server 2003 with Exchange 2003 box to a Server 2008 R2 with Exchange 2010 based primarily on an experts exchange how to article. The exchange server is up and running as an internet facing exchange server with all of the roles necessary to send and receive mail and in that capacity is working fine. I "thought" I had successfully migrated everything from the SBS03 box, and due to huge amounts of errors in everything from AD to the Exchange install itself I removed the reference to the SBS03 server in adsiedit. I've still got access to the old SBS03 box, but as I said the number of errors in everything is preventing even the uninstall of Exchange (or the starting of the Exchange Information Store service), so I'm quite content to leave that box completely out of the picture while trying to solve my problem. After research I discovered this is most likely because I failed to run the “update-globaladdresslist” (or get / update) command from the Exchange shell before I removed the Exchange 2003 server from adsiedit (and the network). If I run the command now it gives me: WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Offline Address Book - first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/Schedule+ Free Busy Information – first administrative group" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameArchive" is invalid and couldn't be updated. WARNING: The recipient "domainname.com/Microsoft Exchange System Objects/ContainernameContacts" is invalid and couldn't be updated. (Note that I’ve replaced my domain with “domainname.com” and my organization name with “containername”) What I’ve tried I don’t want to use the old OAB, or GAL, I don’t care about either, our GAL and distribution lists needed to be organized anyway, so at this point I really just want to get rid of the old reference to the “first administrative group” and move on. I’ve tried to create a new GAL and tell Exchange 2010 to use that GAL instead of the old GAL, but I'm obviously missing some of the commands or something dumb I need to do to start over with a blank slate/GAL/OAB. I'm very tempted to completely delete the entire "first administrative group" tree from adsiedit and see if that gets rid of the ridiculous reference that no longer exists but I dont want to break something else. Commands run to try to create a new GAL and tell exch10 to use that GAL: New-globaladdresslist –name NAMEOFNEWGAL Set-globaladdresslist GUID –name NAMEOFNEWGAL This did nothing for me except now when I run get-globaladdresslist or with the | FL pipe I see two GALs listed, the “default global address list” and the “NAMEOFNEWGAL” that I created. After a little more research this morning it looks like you can't change/delete/remove the default address list, and the only way to do what I'm trying to do would be to maybe remove the default address list via adsiedit and recreate with a command something like new-GlobalAddressList -Name "Default Global Address List" -IncludedRecipients AllRecipients. This would be acceptable but I've searched and searched and can't find instructions or a breakdown of where exactly the default GAL lives in AD, and if I'd have to remove multiple child references/records. Of interest I'm getting an event ID 9337 in my application log OALGen did not find any recipients in address list \Global Address List. This offline address list will not be generated. -\NAMEOFMYOAB --------- on my Exchange 2010 box, which pretty much to me seems to confirm my suspicion that the empty GAL/OAB is what's causing the Outlook client 0x8004010F error. Help please!

  Read the article

• Cannot connect to website - SSL handshaking fails

  - by ravenspoint

  So I cannot connect to certain websites. Just a few, most are OK. The one I really care about is paypal.com. I have done the usual things. Let's see: Checked my etc/hosts Flushed the DNS cache Checked firewall Switched on & off virus protection Switched on and off ad blocking pinged the sites Eventually, I decided to look at what curl is saying in detail == Info: About to connect() to www.paypal.com port 443 (#0) == Info: Trying 66.211.169.2... == Info: connected == Info: SSLv3, TLS handshake, Client hello (1): => Send SSL data, 110 bytes (0x6e) 0000: 01 00 00 6a 03 01 4f 6c aa 8c 57 2b 3d 1e 74 64 ...j..Ol..W+=.td 0010: c1 27 25 a5 3a 12 7f 3f 41 0a 17 15 2e c9 67 7c .'%.:.?A.....g| 0020: b3 e1 f6 9a db a9 00 00 2a 00 39 00 38 00 35 00 ........*.9.8.5. 0030: 16 00 13 00 0a 00 33 00 32 00 2f 00 07 00 05 00 ......3.2./..... 0040: 04 00 15 00 12 00 09 00 14 00 11 00 08 00 06 00 ................ 0050: 03 00 ff 01 00 00 17 00 00 00 13 00 11 00 00 0e ................ 0060: 77 77 77 2e 70 61 79 70 61 6c 2e 63 6f 6d www.paypal.com (hangs here for ever) This looks to me like paypal is refusing to reply to the first SSL handshake. I don't know much about SSL, but compaing to the output from a site that works for me seems to make it obvious == Info: About to connect() to www.cibc.com port 443 (#0) == Info: Trying 159.231.80.200... == Info: connected == Info: SSLv3, TLS handshake, Client hello (1): => Send SSL data, 108 bytes (0x6c) 0000: 01 00 00 68 03 01 4f 6c ad 6a 1f 67 d5 84 c4 4b ...h..Ol.j.g...K 0010: 0d 49 ae d6 b9 5b c3 63 f9 48 aa 18 da 43 d1 32 .I...[.c.H...C.2 0020: 47 ae 17 e5 cd e9 00 00 2a 00 39 00 38 00 35 00 G.......*.9.8.5. 0030: 16 00 13 00 0a 00 33 00 32 00 2f 00 07 00 05 00 ......3.2./..... 0040: 04 00 15 00 12 00 09 00 14 00 11 00 08 00 06 00 ................ 0050: 03 00 ff 01 00 00 15 00 00 00 11 00 0f 00 00 0c ................ 0060: 77 77 77 2e 63 69 62 63 2e 63 6f 6d www.cibc.com == Info: SSLv3, TLS handshake, Server hello (2): <= Recv SSL data, 74 bytes (0x4a) 0000: 02 00 00 46 03 01 00 00 58 cf 26 e2 e1 65 db 11 ...F....X.&..e.. 0010: bc 6f 26 7b 3b 6d eb 14 5f ad 47 dd 86 ea 4d a3 .o&{;m.._.G...M. 0020: fb 9f b7 2a 54 3e 20 5f 6b 04 5a 12 38 64 5d 18 ...*T> _k.Z.8d]. 0030: 65 9e e9 cd 61 eb 91 c1 16 25 61 30 bb 08 2a 78 e...a....%a0..*x 0040: b8 ee b8 7e f2 65 6a 00 04 00 ...~.ej... == Info: SSLv3, TLS handshake, CERT (11): ... and so on - working nicely eventually get some nice HTML Now I am reaaly stuck. This has been going on for five days, so I am pretty sure that the problem is not with paypal. But what on my system could be interfering with the SSL handshaking done by curl with this particular site? I suppose I could not be offering any certificates that PayPal accepts, but wouldn't I get a reply telling me so, or at least giving an error?

  Read the article

• Big data: An evening in the life of an actual buyer

  - by Jean-Pierre Dijcks

  Here I am, and this is an actual story of one of my evenings, trying to spend money with a company and ultimately failing. I just gave up and bought a service from another vendor, not the incumbent. Here is that story and how I think big data could actually fix this (and potentially prevent some of this from happening). In the end this story should illustrate how big data can benefit me (get me what I want without causing grief) and the company I am trying to buy something from. Note: Lots of details left out, I have no intention of being the annoyed blogger moaning about a specific company. What did I want to get? We watch TV, we have internet and we do have a land line. The land line is from a different vendor then the TV and the internet. I have decided that this makes no sense and I was going to get a bundle (no need to infer who this is, I just picked the generic bundle word as this is what I want to get) of all three services as this seems to save me money. I also want to not talk to people, I just want to click on a website when I feel like it and get it all sorted. I do think that is reality. I want to just do my shopping at 9.30pm while watching silly reruns on TV. Problem 1 - Bad links So, I'm an existing customer of the company I want to buy my bundle from. I go to the website, I click on offers. Turns out they are offers for new customers. After grumbling about how good they are, I click on offers for existing customers. Bummer, it goes to offers for new customers, so I click again on the link for offers for existing customers. No cigar... it just does not work. Big data solutions: 1) Do not show an existing customer the offers for new customers unless they are the same => This is only partially doable without login, but if a customer logs in the application should always know that this is an existing customer. But in general, imagine I do this from my home going through the internet service of this vendor to their domain... an instant filter should move me into the "existing customer route". 2) Flag dead or incorrect links => I've clicked the link for "existing customer offers" at least 3 times in under 5 seconds... Identifying patterns like this is easy in Hadoop and can very quickly make a list of potentially incorrect links. No need for realtime fixing, just the fact that this link can be pro-actively fixed across my entire web domain is a good thing. Preventative maintenance! Problem 2 - Purchase cannot be completed Apart from the fact that the browsing pattern to actually get to what I want is poorly designed, my purchase never gets past a specific point. In other words, I put something into my shopping cart and when I want to move on the application either crashes (with me going to an error page) or hangs or goes into something like chat. So I try again, and again and again. I think I tried this entire path (while being logged in!!) at least 10 times over the course of 20 minutes. I also clicked on the feedback button and, frustrated as I was, tried to explain this did not work... Big Data Solutions: 1) This web site does shopping cart analysis. I got an email next day stating I have things in my shopping cart, just click here to complete my purchase. After the above experience, this just added insult to my pain... 2) What should have happened, is a Hadoop job going over all logged in customers that are on the buy flow. It should flag anyone who is trying (multiple attempts from the same user to do the same thing), analyze the shopping card, the clicks to identify what the customers wants, his feedback provided (note: always own your own website feedback, never just farm this out!!) and in a short turn around time (30 minutes to 2 hours or so) email me with a link to complete my purchase. Not with a link to my shopping cart 12 hours later, but a link to actually achieve what I wanted... Why should this company go through the big data effort? I do believe this is relatively easy to do using our Oracle Event Processing and Big Data Appliance solutions combined. It is almost so simple (to my mind) that it makes no sense that this is not in place? But, now I am ranting... Why is this interesting? It is because of $$$$. After trying really hard, I mean I did this all in the evening, and again in the morning before going to work. I kept on failing, But I really wanted this to work... so an email that said, sorry, we noticed you tried to get a bundle (the log knows what I wanted, where I failed, so easy to generate), here is the link to click and complete your purchase. And here is 2 movies on us as an apology would have kept me as a customer, and got the additional $$$$ per month for the next couple of years. It would also lead to upsell on my phone package etc. Instead, I went to a completely different company, bought service from them. Lost money for company A, negative sentiment for company A and me telling this story at the water cooler so I'm influencing more people to think negatively about company A. All in all, a loss of easy money, a ding in sentiment and image where a relatively simple solution exists and can be in place on the software I describe routinely in this blog... For those who are coming to Openworld and maybe see value in solving the above, or are thinking of how to solve this, come visit us in Moscone North - Oracle Red Lounge or in the Engineered Systems Showcase.

  Read the article

• How do I allow mysqld to use more than 24.9% of my cpu?

  - by Joseph Yancey

  I have a Web server running on RHEL that is running Apache and MySQL. It has a Quad core 3.2Ghz Xeon CPU and 8 Gigs of RAM Most of the time, we don't have any issues at all. Our web application is very database intensive. When our usage gets pretty heavy MySQL will peg out at using 24.9% of the cpu. Most of the time, it hangs around below 5%. I have speculated that it is only using one core of the CPU and it is pegging out that core but TOP shows me in the cpu column that mysqld changes cores even while the usage stays at 24.9%. When it does this MySQL gets painfully slow as it is queuing up queries Is there some magic configuration that will tell mysql to use more cpu when it needs to? Also, any other advice on my configuration would be helpful. We run two applications on this server. One that runs Innodb but doesn't get much usage (it has been replaced by the other app), and one that runs MyIsam and gets lots of use. Overall, our whole mysql data directory is something like 13Gigs if that matters at all. Here is my config: [root@ProductionLinux root]# cat /etc/my.cnf [mysqld] server-id = 71 log-bin = /var/log/mysql/mysql-bin.log binlog-do-db = oldapplication binlog-do-db = newapplication binlog-do-db = support thread_cache_size = 30 key_buffer_size = 256M table_cache = 256 sort_buffer_size = 4M read_buffer_size = 1M skip-name-resolve innodb_data_home_dir = /usr/local/mysql/data/ innodb_data_file_path = InnoDB:100M:autoextend set-variable = innodb_buffer_pool_size=70M set-variable = innodb_additional_mem_pool_size=10M set-variable = max_connections=500 innodb_log_group_home_dir = /usr/local/mysql/data innodb_log_arch_dir = /usr/local/mysql/data set-variable = innodb_log_file_size=20M set-variable = innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit = 1 log-queries-not-using-indexes log-error = /var/log/mysql/mysql-error.log mysql show variables; +---------------------------------+-----------------------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+-----------------------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/ | | binlog_cache_size | 32768 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 5 | | datadir | /usr/local/mysql/data/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | | ft_max_word_len | 84 | | ft_min_word_len | 4 | | ft_query_expansion_limit | 20 | | ft_stopword_file | (built-in) | | group_concat_max_len | 1024 | | have_archive | YES | | have_bdb | NO | | have_blackhole_engine | NO | | have_compress | YES | | have_crypt | YES | | have_csv | NO | | have_example_engine | NO | | have_federated_engine | NO | | have_geometry | YES | | have_innodb | YES | | have_isam | NO | | have_ndbcluster | NO | | have_openssl | NO | | have_query_cache | YES | | have_raid | NO | | have_rtree_keys | YES | | have_symlink | YES | | init_connect | | | init_file | | | init_slave | | | innodb_additional_mem_pool_size | 10485760 | | innodb_autoextend_increment | 8 | | innodb_buffer_pool_awe_mem_mb | 0 | | innodb_buffer_pool_size | 73400320 | | innodb_checksums | ON | | innodb_commit_concurrency | 0 | | innodb_concurrency_tickets | 500 | | innodb_data_file_path | InnoDB:100M:autoextend | | innodb_data_home_dir | /usr/local/mysql/data/ | | innodb_doublewrite | ON | | innodb_fast_shutdown | 1 | | innodb_file_io_threads | 4 | | innodb_file_per_table | OFF | | innodb_flush_log_at_trx_commit | 1 | | innodb_flush_method | | | innodb_force_recovery | 0 | | innodb_lock_wait_timeout | 50 | | innodb_locks_unsafe_for_binlog | OFF | | innodb_log_arch_dir | /usr/local/mysql/data | | innodb_log_archive | OFF | | innodb_log_buffer_size | 8388608 | | innodb_log_file_size | 20971520 | | innodb_log_files_in_group | 2 | | innodb_log_group_home_dir | /usr/local/mysql/data | | innodb_max_dirty_pages_pct | 90 | | innodb_max_purge_lag | 0 | | innodb_mirrored_log_groups | 1 | | innodb_open_files | 300 | | innodb_support_xa | ON | | innodb_sync_spin_loops | 20 | | innodb_table_locks | ON | | innodb_thread_concurrency | 20 | | innodb_thread_sleep_delay | 10000 | | interactive_timeout | 28800 | | join_buffer_size | 131072 | | key_buffer_size | 268435456 | | key_cache_age_threshold | 300 | | key_cache_block_size | 1024 | | key_cache_division_limit | 100 | | language | /usr/local/mysql-standard-5.0.18-linux-x86_64-glibc23/share/mysql/english/ | | large_files_support | ON | | large_page_size | 0 | | large_pages | OFF | | license | GPL | | local_infile | ON | | locked_in_memory | OFF | | log | OFF | | log_bin | ON | | log_bin_trust_function_creators | OFF | | log_error | /var/log/mysql/mysql-error.log | | log_slave_updates | OFF | | log_slow_queries | OFF | | log_warnings | 1 | | long_query_time | 10 | | low_priority_updates | OFF | | lower_case_file_system | OFF | | lower_case_table_names | 0 | | max_allowed_packet | 1048576 | | max_binlog_cache_size | 18446744073709551615 | | max_binlog_size | 1073741824 | | max_connect_errors | 10 | | max_connections | 500 | | max_delayed_threads | 20 | | max_error_count | 64 | | max_heap_table_size | 16777216 | | max_insert_delayed_threads | 20 | | max_join_size | 18446744073709551615 | | max_length_for_sort_data | 1024 | | max_relay_log_size | 0 | | max_seeks_for_key | 18446744073709551615 | | max_sort_length | 1024 | | max_sp_recursion_depth | 0 | | max_tmp_tables | 32 | | max_user_connections | 0 | | max_write_lock_count | 18446744073709551615 | | multi_range_count | 256 | | myisam_data_pointer_size | 6 | | myisam_max_sort_file_size | 9223372036854775807 | | myisam_recover_options | OFF | | myisam_repair_threads | 1 | | myisam_sort_buffer_size | 8388608 | | myisam_stats_method | nulls_unequal | | net_buffer_length | 16384 | | net_read_timeout | 30 | | net_retry_count | 10 | | net_write_timeout | 60 | | new | OFF | | old_passwords | OFF | | open_files_limit | 2510 | | optimizer_prune_level | 1 | | optimizer_search_depth | 62 | | pid_file | /usr/local/mysql/data/ProductionLinux.pid | | port | 3306 | | preload_buffer_size | 32768 | | protocol_version | 10 | | query_alloc_block_size | 8192 | | query_cache_limit | 1048576 | | query_cache_min_res_unit | 4096 | | query_cache_size | 0 | | query_cache_type | ON | | query_cache_wlock_invalidate | OFF | | query_prealloc_size | 8192 | | range_alloc_block_size | 2048 | | read_buffer_size | 1044480 | | read_only | OFF | | read_rnd_buffer_size | 262144 | | relay_log_purge | ON | | relay_log_space_limit | 0 | | rpl_recovery_rank | 0 | | secure_auth | OFF | | server_id | 71 | | skip_external_locking | ON | | skip_networking | OFF | | skip_show_database | OFF | | slave_compressed_protocol | OFF | | slave_load_tmpdir | /tmp/ | | slave_net_timeout | 3600 | | slave_skip_errors | OFF | | slave_transaction_retries | 10 | | slow_launch_time | 2 | | socket | /tmp/mysql.sock | | sort_buffer_size | 4194296 | | sql_mode | | | sql_notes | ON | | sql_warnings | ON | | storage_engine | MyISAM | | sync_binlog | 0 | | sync_frm | ON | | sync_replication | 0 | | sync_replication_slave_id | 0 | | sync_replication_timeout | 10 | | system_time_zone | CST | | table_cache | 256 | | table_lock_wait_timeout | 50 | | table_type | MyISAM | | thread_cache_size | 30 | | thread_stack | 262144 | | time_format | %H:%i:%s | | time_zone | SYSTEM | | timed_mutexes | OFF | | tmp_table_size | 33554432 | | tmpdir | | | transaction_alloc_block_size | 8192 | | transaction_prealloc_size | 4096 | | tx_isolation | REPEATABLE-READ | | updatable_views_with_limit | YES | | version | 5.0.18-standard-log | | version_comment | MySQL Community Edition - Standard (GPL) | | version_compile_machine | x86_64 | | version_compile_os | unknown-linux-gnu | | wait_timeout | 28800 | +---------------------------------+-----------------------------------------------------------------------------+ 210 rows in set (0.00 sec)

  Read the article

• Are you reporting Visual Studio 2012 issues to Microsoft correctly?

  - by Tarun Arora

  Issues you may run into while using Visual Studio need to be reported to the Microsoft Product Team via the Microsoft connect site. The Microsoft team then tries to reproduce the issue using the details provided by you. If the information you provide isn’t sufficient to reproduce the issue the team tries to contact you for specifics, this not only increases the cycle time to resolution but the lack of communication also results in issues not being resolved. So, when I report an issue one part of me tells me to include as much detail about the issue as I can clubbing screen shots, repo steps, system information, visual studio version information,… the other half tells me this is so time consuming, leave it for now and come back to fill all these details later. Reporting a bug but not including the supporting information is an invitation to excuses like …     Microsoft has absolutely changed this experience for VS 2012. The Microsoft Visual Studio Feedback tool is designed to simplify the process of providing feedback and reporting issues to Microsoft that you may encounter while using Microsoft Visual Studio 2012. Note – The Microsoft Visual Studio 2012 Feedback client currently only works for VS 2012 and not any other versions of Visual Studio. Setting up the Microsoft Visual Studio 2012 Feedback client Open Visual Studio, from the Tools menu select Extension and Updates. In the Extension and Updates window, click Online from the left pane and search using the text ‘feedback’, download and Install Microsoft Visual Studio 2012 Feedback Tool by following the instructions from the wizard. Note - Restarting Visual Studio after the install is a must! How to report a bug for Visual Studio 2012? Click on the Help menu and choose Report a Bug You should see an icon Microsoft Visual Studio 2012 Feedback Tool come up in the system tray icon area You’ll need to accept the Privacy statement. You have the option of reporting the feedback as private or public. Microsoft works with several Partners, MVP’s and Vendors who get access to early bits of Microsoft products for valuation. This is where it becomes essential to report the feedback privately. I would choose the Public option otherwise. After all if it’s out there in the public, others can discover and add to it easily. You now have the option to report a new issue or add to an existing issue. Should you choose to add to an existing issue you should have the feedback ID of the issue available. This can be obtained from the Microsoft Connect site. For now I am going to focus on reporting a new feedback privately. Filling out the feedback details You will notice that VsInfo.xml and DxDiagOutput.txt are automatically attached as you enter this screen (more on that later).  Feedback Type Choose the feedback type from (Performance, Hang, Crash, Other) Note – The record button will only be enabled once you have enabled once you have chosen the feedback type, Bug-repro recording is not available for Windows Server 2008.     Effective Title and Description Enter a title that helps us differentiate the bug when it appears in a list, so that we can group it with any related bugs, assign it to a developer more effectively, and resolve it more quickly. Example: Imagine that you are submitting a bug because you tried to install Service Pack 1 and got a message that Visual Studio is not installed even though it is. Helpful:  Installed Visual Studio version not detected during Service Pack 1 setup. Not helpful:  Service Pack 1 problem. Tip: Write the problem description first, and then distil it to create a title. Example Description: Helpful: When I run Service Pack 1 Setup, I get the message "No Visual Studio version is detected" even though I have Visual Studio 2010 Ultimate and Visual C++ 2010 Express installed on my machine. Even though I uninstalled both editions, and then first reinstalled Ultimate and then Express, I still get the message. Record: Becoming a first class citizen Often a repro report is invaluable to describe and decipher the issue. Please use this feature to send actionable feedback. The record repro feature works differently depending on the feedback type you selected. Please find below details for each recording option. You can start recording simply by selecting a feedback type, and clicking on the “Record” button. When "Performance" is the bug type: When the Microsoft Visual Studio trace recorder starts, perform the actions that show the performance problem you want to report and then click on the "Stop Recording" button as soon as you experience the performance problem. Because the tool optimizes trace collection, you can run it for as long as it takes to show the problem, up to two hours. Note that, you need to stop recording as soon as the performance issue occurs, because the tool captures only the last couple minutes of your actions to optimize the trace collection. After you stop the recording, the tool takes up to two minutes to assemble the data and attach an ETLTrace.zip file to your bug report. The data includes information about Windows events and the Visual Studio code path. Note that, running the Microsoft Visual Studio trace recorder requires elevated user privilege. When "Crash" is the bug type: When the dialog box appears, select the running Visual Studio instance for which you want to show the steps that cause a crash. When the crash occurs, click on the "Stop Record" button. After you do this, two files are attached to your bug report - an AutomaticCrashDump.zip file that contains information about the crash and a ReproSteps.zip file that shows the repro steps. Repro steps are captured by Windows Problem Steps Recorder. Note that, you can pause the recording, and resume later, or for a specific step, you can add additional comments. When "Hang" is the bug type: The process for recording the steps that cause a hang resembles the one for crashes. The difference is, you can even collect a dump file after the VS hangs; start the VSFT either from the system tray or by starting a new instance of VS, select "Hang" as feedback type and click on the "Record" button. You will be prompted which VS to collect dump about, select the VS instance that hanged. VSFT collects a dump file regarding the hang, called MiniDump.zip, and attaches to your bug report. When "Other" is the bug type: When the problem step recorder starts, perform the actions that show the issue you want to report and then choose the "Stop” button. You can pause the recording, and resume later, or for a specific step, you can add additional comments. Once you’re done, ReproSteps.zip is added to your bug report. Pre-attached files It is essential for Microsoft to know what version of the the product are you currently using and what is the current configuration of your system. Note – The total size of all attachments in a bug report cannot exceed 2 GB, and every uncompressed attachment must be smaller than 512 MB. We recommend that you assemble all of your attachments, compress them together into a .zip file, and then attach the .zip file. Taking a screenshot Associate a screen shot by clicking the Take screenshot button, choose either the entire desktop, the specific monitor (useful if you are working in a multi monitor configuration) or the specific window in question. And finally … click Submit If you need further help, more details can be found here. You can view your feedback online by using the following URL “">https://connect.microsoft.com/VisualStudio/SearchResults.aspx?SearchQuery=<feedbackId>” Happy bug logging

  Read the article

• Unable to set nginx to serve my staging website

  - by user100778

  I'm having some troubles setting up nginx to serve my staging website. What I did is change the server_name but for some reasons it just doesn't work. The url scheme is "domain.foo" is production, "staging.domain.foo" is staging, "foobar.domain.foo" is a web service, "foobar.staging.domain.foo" is the staging version of the same webserver, ".domain.foo" is routed to serve some s3 static HTML, ".staging.domain.foo" is routed to serve some s3 static HTML in another bucket. All production urls work and are correctly configured, all staging urls doesn't work. Here is my conf file. You will see some duplication, I will gladly accept any correction/optimization, I'm a coder and configuring servers is definitely not my thing (but I'm eager to learn and improve...). server { listen 80; ## listen for ipv4 server_name "domain.foo" "www.domain.foo" default_server; access_log /var/log/nginx/access.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; location ~* \.(jpg|jpeg|gif|png|ico|css|bmp|js|html)$ { access_log off; expires max; root /home/foo/Foo/current/public; break; } if ($host ~ 'www.domain.foo') { rewrite ^/(.*)$ http://domain/foo/$1 permanent; } proxy_pass http://production; break; } } server { listen 80; server_name "staging.domain.foo"; access_log /var/log/nginx/access.staging.log; error_log /var/log/nginx/error.staging.log; client_max_body_size 5M; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://staging; break; } } server { listen 80; ## listen for ipv4 server_name "foobar.domain.foo"; access_log /var/log/nginx/access.log; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; if ($host = 'foobar.domain.foo') { proxy_pass http://foobar; break; } } } server { listen 80; ## listen for ipv4 server_name foobar.staging.domain.foo; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://foobar_staging; break; } } server { listen 80; server_name "~^(.+)\.domain\.foo$"; location / { proxy_intercept_errors on; error_page 404 = http://domain.foo/404; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.domain.foo.s3.amazonaws.com; } } server { listen 80; server_name "~^(.+)\.staging\.domain\.foo$"; location / { proxy_intercept_errors on; set $subdomain $1; rewrite /$ "/$subdomain/index.html" break; rewrite ^ /$subdomain$request_uri? break; proxy_pass http://bucket.staging.domain.foo.s3.amazonaws.com; } } upstream production { server 111.255.111.110:8000; server 111.255.111.110:8001; server 111.255.111.110:8002; server 111.255.111.110:8003; } upstream staging { server 222.255.222.222:8000; server 222.255.222.222:8001; } upstream foobar { server 111.255.222.165:9000; server 111.255.222.165:9001; server 111.255.222.165:9002; } upstream foobar_staging { server 222.255.222.222:9000; } What happens now when I point my browser to staging.domain.foo is that it hangs. Can't find anything in the logs, but for example the access.staging.log and errors.staging.log are created. Anybody has an idea? :)

  Read the article

• PHP pages working slow from time to time

  - by user1038179

  I have VPS with limit of 2GB of ram and 8 CPU cores. I have 5 sites on that VPS (one of them is just for testing, no visitors exept me). All 5 sites are image galleries, like wallpaper sites. Last week I noticed problem on one site (main domain, used for name servers, and also with most traffic, visitors). That site has two image galleries, one is old static html gallery made few years ago and another, main, is powered by ZENPhoto CMS. Also I have that same gallery CMS on another two sites on that same VPS (on one running site and on one just for testing site). On other two sites I have diferent PHP driven gallery. Problem is that after some time (it vary from 10 minutes to few hours after apache restart), loading of pages on main site becomes very slow, or I get 503 Service Temporarily Unavailable error. So pages becomes unavailable. But just that part with new CMS gallery, old part of site with static html pages are working fast and just fine. Also other two sites with same CMS gallery and other two with different PHP driven gallery are working fine and fast at the same time. I thought it must be something with CMS on that main site, because other sites are working nice. Then I tryed to open contact and guest book pages on that main site which are outside of that CMS but also PHP pages, and they do not load too, but that same contact php scipts are working on other sites at the same time. So, when site starts to hangs, ONLY PHP generated content is not working, like I said other static pages are working. And, ONLY on that one main site I have problems. Then I need to restart Apache, after restart everything is vorking nice and fast, for some time, than again, just PHP pages on main site are becomming slower. If I do not restart apache that slowness take some time (several minutes, hours, depending ot traffic) and during that time PHP diven content is loading very slow or unavailable on that site. After sime time, on moments everything start to work and is fast again for some time, and again. In hours with more traffic PHP content is loading slowly or it is unavailable, in hours with less traffic it is sometimes fast and sometimes little bit slower than usually. And ones again, only on that main site, and only PHP driven pages, static pages are working fast even in most traffic hours also other sites with even same CMS are working fast. Currently I have about 7000 unique visitors on that site but site worked nice even with 11500 visitors per day. And about 17000 in total visitors on VPS, all sites ( about 3 pages per unique visitor). When site start to slow down sometimes in apache status I can see something like this: mod_fcgid status: Total FastCGI processes: 37 Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 11300 39 28 7 Working 11274 47 28 7 Working 11296 40 29 3 Working 11283 45 30 3 Working 11304 36 31 1 Working 11282 46 32 3 Working 11292 42 33 1 Working 11289 44 34 1 Working 11305 35 35 0 Working 11273 48 36 2 Working 11280 47 39 1 Working 10125 133 40 12 Exiting(communication error) 11294 41 41 1 Exiting(communication error) 11277 47 42 2 Exiting(communication error) 11291 43 43 1 Exiting(communication error) 10187 108 43 10 Exiting(communication error) 10209 95 44 7 Exiting(communication error) 10171 113 44 5 Exiting(communication error) 11275 47 47 1 Exiting(communication error) 10144 125 48 8 Exiting(communication error) 10086 149 48 20 Exiting(communication error) 10212 94 49 5 Exiting(communication error) 10158 118 49 5 Exiting(communication error) 10169 114 50 4 Exiting(communication error) 10105 141 50 16 Exiting(communication error) 10094 146 50 15 Exiting(communication error) 10115 139 51 17 Exiting(communication error) 10213 93 51 9 Exiting(communication error) 10197 103 51 7 Exiting(communication error) Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7983 1079 2 149 Ready 7979 1079 11 151 Ready Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7990 1066 0 57 Ready 8001 1031 64 35 Ready 7999 1032 94 29 Ready 8000 1031 91 36 Ready 8002 1029 34 52 Ready Process: php5 (/usr/local/cpanel/cgi-sys/php5)Pid Active Idle Accesses State 7991 1064 29 115 Ready When it is working nicly there is no lines with "Exiting(communication error)" Active and Idle are time active and time since last request, in seconds. Here are system info. Sysem info: Total processors: 8 Processor #1 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5440 @ 2.83GHz Speed 88.320 MHz Cache 6144 KB All other seven are the same. System Information Linux vps.nnnnnnnnnnnnnnnnn.nnn 2.6.18-028stab099.3 #1 SMP Wed Mar 7 15:20:22 MSK 2012 x86_64 x86_64 x86_64 GNU/Linux Current Memory Usage total used free shared buffers cached Mem: 8388608 882164 7506444 0 0 0 -/+ buffers/cache: 882164 7506444 Swap: 0 0 0 Total: 8388608 882164 7506444 Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/vzfs 100G 34G 67G 34% / none System Details: Running on: Apache/2.2.22 System info: (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 DAV/2 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_fcgid/2.3.6 Powered by: PHP/5.3.10 Current Configuration Default PHP Version (.php files) 5 PHP 5 Handler fcgi PHP 4 Handler suphp Apache suEXEC on Apache Ruid2 off PHP 4 Handler suphp Apache suEXEC on Apache Configuration The following settings have been saved: fileetag: All keepalive: On keepalivetimeout: 3 maxclients: 150 maxkeepaliverequests: 10 maxrequestsperchild: 10000 maxspareservers: 10 minspareservers: 5 root_options: ExecCGI, FollowSymLinks, Includes, IncludesNOEXEC, Indexes, MultiViews, SymLinksIfOwnerMatch serverlimit: 256 serversignature: Off servertokens: Full sslciphersuite: ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP:!kEDH startservers: 5 timeout: 30 I hope, I explained my problem nicely. Any help would be nice.

  Read the article

< Previous Page | 53 54 55 56 57 58 59  | Next Page >