Search Results

Search found 10397 results on 416 pages for 'mobile devices'.

Page 57/416 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Degraded RAID5 and no md superblock on one of remaining drive

  - by ark1214

  This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

  Read the article

• Have you considered doing revenue sharing to fund development of a mobile app? How would you do it?

  - by Brennan

  I am looking to build multiple mobile apps which leverage existing content and resources by enabling these mobile apps with web services. I will duplication much of the same features which are also in place and add more features that are possible on a mobile device like address book, maps and calendar integration to make the service much more useful. To fund these projects I see that I have 2 options. First I could simply quote them for the project based on my hourly rate and the estimate in hours that I will take the to complete the job. That may be a high number. The second option would be to do shared revenue with ads placed in the app. I could then take a percentage of any revenue that is generated from the app. There is also a hybrid where I might charge for a percentage of the estimated quote and then take a percentage of the revenue sharing. So my question is how much should I propose for the revenue sharing? Should it be 30%? Or maybe I should make it 70% up to a point that a certain dollar amount is reached? And should the revenue sharing agreement be for 12 months, 24 months or more? Should I include in the proposal an agreement that they will help promote this app with their content and resources? Ultimately this system will benefit both sides because it extends their reach into the mobile space instead of where they are currently with just print and web. I have tried to find some examples with a few Google searches but I keep hitting content about the Google and Apple revenue sharing models. I would like to get some solid examples that are working to compare against so that my proposal do build these apps is not completely off base.

  Read the article

• Windows Phone–A beautiful phone which I admire but I don’t recommend to friends and family

  - by Gopinath

  Microsoft’s Windows Phones are the most beautiful phones I’ve seen. Look at the photo which Microsoft shared on their Facebook page today. It’s gorgeous. Windows Phones come in vibrant colors and the user interface is very lively. When you keep an iPhone, Android Phone & a Windows Phone on a table, Windows Phone definitely stands out. Android and iOS interfaces are routine – a bunch of apps icons arranged in rows and multiple screens. Windows Phone is very different, the live tiles concept mesmerizes us. I love Windows Phone, but neither I buy one nor I recommend to family/friends! Why? Because it does not have all the Apps I need. Microsoft advertises that Windows Phone has 100K apps on its Windows Market Place. It’s true, there are 100K+ apps available for Windows Phone but not many of them are really useful and most of the popular Apps I use on Android are not available. When I say this to my friends at Microsoft, they don’t agree and one of them asked me list the apps that are not available. For him today I spent an hour quickly scanning through the apps installed on my Google Nexus and searched for same apps on Windows Market Place. As expected many of them are not available. Here is the list of my favorite Android apps that are not available for Windows Phone Mint – I use this app more than any of the Banking Apps I’ve installed on my mobile. It’s one app to keep a tab on all the expenses and income, the best money management and tracking app. Google Chrome – Web without Google Chrome is too boring, either on Desktop or on mobile. IE is too heavy and Firefox is loosing its grip. Chrome is the new darling of web. Pulse, Flipboard – Flipboard and Pulse are one of the best apps for reading news and following content of favorite blogs. Dropbox – Sync content across devices and provides access to your content on any device.It really does not matter what is your gadget – mobile, tablet or computer; Dropbox lets you access your content. GMail, Google Maps – Should I say how important are these two apps in our day to day life!! Vonage Extension – For around 30 bucks a month, Vonage provide landline service in USA + unlimited calls to India and many other countries + Vonage Extension App that lets Android/iOS mobile to make unlimited international calls for free. Without Vonage Extension app, I’m almost cutoff from my family and friends back home in India. Instagram – The most popular camera app used from a common man to celebrities. Raaga, Dhingana  – Music is part and parcel of life and these two apps are the most like popular apps to listen to Indian music. Quora – Quora is the place where most of the sensible discussions happen on web. Google Analytics, Google Adsense – I’m a blogger and these two apps mean a lot to me The list goes on and on! There are many useful apps that are not available on Windows Phone – TuneIn, MyTWC, Chrome To Phone, Google Voice, etc. Without all these apps, Windows Phone is just another old Nokia phone. Even though Windows Phone is the most beautiful phone, it needs Apps to attract customers. Without apps a smartphone is more or less a dumb feature phone which we loved to use before release of iPhone. Wish in an year or two the beautiful Windows Phone may have all the missing Apps. When it happens I’ll buy a phone for myself and recommend it to my family & friends. But till then I prefer to stay away.

  Read the article

• Opera Mobile for Windows + Reported Screen Size

  - by Antony Scott

  I know this isn't a direct programming question, but's it's kinda relevant as I'm trying to get a good testing environment set up before I embark on my latest project. I'm trying to set up Opera Mobile for Windows to allow me to test a new website. The UserAgent I get is a fairly generic one, so my workaround is to tweak my mobile.browser file to have the correct screen width and height of the target device. Is it possible to add to the list of "fake" user agents that Opera Mobile for Windows can pretend to be? It currently supports S60, Android and Windows Mobile.

  Read the article

• How to hide Start button while openning camera using CameraCaptureDialog in windows mobile

  - by gourav saini

  How to hide Start button while openning camera using CameraCaptureDialog in windows mobile

  Read the article

• Creating a mobile version for my web app in CodeIgniter

  - by KeyStroke

  Hi there, I'm using CodeIgniter to develop a new web app, and I'd like to create a mobile version that users get redirect to when they visit it from their phones. The mobile version of the app should have a different flow, so swapping CSS/HTML files in the code is not an option for me since the mobile version and the web version will handle things differently in their Controllers and Views, while sharing the same Models. Anyway how I could do this efficiently? Your help is much appreciated. :)

  Read the article

• google mobile tracking api

  - by Bharanikumar

  Hi , We are doing call taxi business , I have around 100 drivers , I want to track these 100 drivers , am not ready to go for GPRS and any other costly works , So i want to track these guys using His mobile, That is, I have all these drivers mobile number, is there a way to find his/her present location using any google API , Please tell me Google API for tracking mobile , Thanks Bharanikumar

  Read the article

• Read sms from Mobile device with .net application?

  - by nikunj

  Hello Friends, Can anyone help me? How can I read SMS from mobile with my .net application? i have a Nokia 5310 mobile phone. Can you tell me from where i can download Nokia SDK or source code or Nokia API etc? I want to make a custom application which reads SMS and at the same time sends a response to the sender's mobile number.

  Read the article

• testing .mobile mime format with capybara / rspec

  - by Chris Beck

  For detecting and responding to mobile user agents, I'm using Mime::Type.register_alias "text/html", :mobile and the approach I'm wondering what is the best approach to test with capybara. This article suggests setting up an iphone driver with Capybara.register_driver :iphone do |app| http://blog.plataformatec.com.br/2011/03/configuring-user-agents-with-capybara-selenium-webdriver/ but I'd like a more flexible approach where the mime type is set via the url extension localhost/index.mobile and where I can do this visit user_path( format: :mobile) Rails understands the extension and sets the format in the params hash, but how do I get the url helper methods to add that to all urls as a file extension?

  Read the article

• How to trigger an application in mobile automatically

  - by san6086

  My idea is to make an application start automatically when a message from a specific user reaches the inbox of the mobile . For example if my friend sends some numbers to my mobile, the sms has to be read and validated first and then calculator ( inbuilt mobile application) has to be triggered and process the numbers from the message. Please help me with the above query.

  Read the article

• Need help on understanding Mobile First concept

  - by RhymeGuy

  So, I worked on responsive sites before but I'm on my way to build my first responsive site now. I opened some articles on the subject, and boom: Mobile First.. I have no idea how I skipped that concept till now. From the beginning I cant seem to understand whole thing (except that number of mobile devices will take out soon desktop computers) and here is why. How I'm supposed to know how my site will look for desktop version, if I design it for mobile first? I mean, on the smallest device I will have to eventually hide some content etc, how I'm supposed to know what to hide and move things, when I don't know how the site will look on bigger screen? Isn't stripping the things easier?!?! For me (right now), the Mobile First concept looks to me like building pyramid upside down.

  Read the article

• How to get the speed of a network card on the command line?

  - by nelaar

  I am trying to see what the speed of some network cards on a remote server. Our reporting software says they are 10Mbps, but I am sure that is wrong they should be 1Gbps. Our monitoring software uses SNMP to query the servers, perhaps the servers are reporting information incorrectly. ifconfig does not report what the speed of the devices are. How can I see what the currently configured speed of the cards are.

  Read the article

• Synchronized Clipboard?

  - by Boris_yo

  Evernote, Dropbox, Xmarks and what not. Many know these but is there a software that can synchronize clipboard between devices? For what you might be asking? Here is for what: Sometimes I want URL that I see on my desktop/laptop computer to enter into laptop's/smartphone's browser but unless I save that URL to .TXT file, email URL or save to Evernote there is no other way to directly do that. So is there such software already?

  Read the article

• Missing NIC and USB devices

  - by MJ

  Coming into work today, I've found we have a fwe different computers (different companies/networks/OS versions - all windows based) that are all having the same issue. 1) Network NIC is not able to be viewed from network connections. If you refresh, its saying the service is not started. Services state the service is started and running. 2) USB devices are not recognized when plugged in, scan for hardware changes, etc. We have managed AV, that is kept up to date, and a managed patch policy that has all these machines at the most recent patch. I'm just wondering if anyone else has experienced these same symptoms, and what they have done to resolve them.

  Read the article

• Cannot find grldr in all devices

  - by blockhead

  I'm running wubi on XP machine. Started out originally with 8.04, and gradually upgraded to 10.04. Recently, I was creating linux bootable USB drive, and put it in my system to see if it would work. After booting the LiveOS, and rebooting my machine, I know get the error Cannot find grldr in all devices when booting Ubuntu. I don't know what grldr is, but I assume it is the GRUB Loader. Did booting the LiveOS screw with my MBR perhaps? How can I fix this, and if not, is it possible to reinstall wubi, without losing anything of what I have now?

  Read the article

• Internet speed is suddenly slow only on my laptop, but it's normal in other devices

  - by Wael

  I have a TP-Link router connected to a ZTE modem, with 2 laptops, a tablet, 2 phones connected via the router's WiFi, and an additional desktop connected via ethernet to the router. Today, my laptop started to have a very slow connection to the internet, which at first I thought it was the operator's problem to find out later on that it works fine on other devices. I tried to connect directly via WiFi to the modem, but it was as slow. I cannot access facebook at all, google takes forever to do a search, and youtube barely works. The weird thing though, is that when youtube does work, the streaming is full speed. This happens also when I download a file! My browse is Firefox, but I used Chrome and IE9 with the same results. I work on Windows 7 Thanks for any advices.

  Read the article

• How to debug xsane "no devices available" error on 64 bit Ubuntu 10.04

  - by BD at Rivenhill

  I have a Brother MFC-J615W printer/scanner and I wish to use the scanning feature across a network with a computer running 64-bit Ubuntu 10.04. I have installed the drivers from the Brother website and followed all of the instructions, and printing works fine, but xsane (installed from repositories) produces a popup with the message "no devices available" on startup. I recently had success with a similar approach when installing drivers for a Brother MFC-495CW on 32-bit Unbuntu 9.10, so I am aware of issues such as requiring root access if the driver permissions are not set correctly, but running xsane as root does not solve this problem. Are there any tools available to debug this problem further or does anyone have advice on how to proceed?

  Read the article

• Driver to split audio to 2 different devices?

  - by ThantiK

  I recently bought one of these USB headsets against my own better judgement, and it's really costing my sanity at this point. Previously when using a standard jack, I just used a splitter so I could split off the things I was doing with my TV or headset, I could just turn the TV off or the headset volume down should I want to use one at a time. Now, along comes this USB headset and I find that I can't choose for the sound of 1 application to pipe to 2 different devices on Windows; How can I solve this? Does any software out there exist for this purpose?

  Read the article

• Different keyboard layouts at same time for different devices

  - by Joao Carlos

  I have a MacBook Pro running Snow Leopard, and I am using it as a portable but also desktop computer. In order to acheive this, I bought a VGA adapter and I am using it with an external mouse, keyboard, and monitor. The problem is, the external keyboard layout is different from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave differently than they should. Question is, how can I set up different layouts at same time for different devices? I want US for external keyboard and PT for the default one.

  Read the article

• Refresh devices - reconnect CF card drive by script (unplug-plug equivalent)

  - by Chris

  Hello I plug a completely clean CF-card into my USB card-writer. Then I dd a mbr block of 512 bytes size to the device, which contains the partition table and the definition of one partition. Problem: While "fdisk -l /dev/sdx" correctly displays the partition, it happens that there is no device like "/dev/sdx1" after these operations (as it was not present before). Unplugging and plugging the card-writer solves the problem and makes the device(s) appear. Since I use this procedure in a script, manually unplugging and re-plugging is no option whatsoever. Is there a way to "refresh" the devices or to "unplug and re-plug" the drive by script such that /dev/sdx1 appears? Thanks for any help, Chris

  Read the article

• USB ports not recognizing devices (vista)

  - by frank

  I'm trying to fix a problem on a Vista machine where all the USB ports seem to have power but they don't recognize devices plugged into them. It seemed to start after I plugged my mp3 player (sansa clip) into it and disconnect it. So it sounds similar to this article http://support.microsoft.com/kb/817900 but that was for XP. And I did try all the fixes (including the registry entry) but they did not help. It also sounds similar to this SU question 50110 but I don't think it is the mother board. I have see other places that suggest reinstalling the OS...but that seems like a last resort type of thing. I have also seen a suggestion of doing a system restore but not sure if that will help. Any ideas of what I can try?

  Read the article

• Diferent keyboard layouts at same time for diferent devices

  - by Joao Carlos

  Hello, I have a MacBook Pro running Snow Leopard, and I am using it was a portable but also desktop computer. In order to acheive this, i bought a VGA adapter and I am using it with an external mouse+keyboard+monitor. The problem is, the external keyboard layout is diferent from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave diferently from what they are supposed to. Question is, how can I set up diferent layouts at same time for diferent devices? I want US for external keyboard and PT for the default one.

  Read the article

• How to debug xsane "no devices available" error on 64 bit Ubuntu 10.04

  - by BD at Rivenhill

  I have a Brother MFC-J615W printer/scanner and I wish to use the scanning feature across a network with a computer running 64-bit Ubuntu 10.04. I have installed the drivers from the Brother website and followed all of the instructions, and printing works fine, but xsane (installed from repositories) produces a popup with the message "no devices available" on startup. I recently had success with a similar approach when installing drivers for a Brother MFC-495CW on 32-bit Unbuntu 9.10, so I am aware of issues such as requiring root access if the driver permissions are not set correctly, but running xsane as root does not solve this problem. Are there any tools available to debug this problem further or does anyone have advice on how to proceed?

  Read the article

• /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor disappeared on ubuntu 11.10

  - by Bob

  I have an Ubuntu 11.10 server that has been up for 210 days. I have been frequently doing apt-get upgrade every few weeks, and this time I noticed that my server load average just shot up. The last time this happened between upgrades, it was because the cpu scaling governor was set to ondemand. But this time when I tried to list the contents of /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor the file is missing. There isn't even a cpufreq folder anymore! How do I fix this and ensure there is no cpu scaling going on?

  Read the article

• Built-in webcam on Asus laptop missing under imaging devices in Windows 7

  - by dave

  My built-in webcam for U43JC Asus laptop (Windows 7 32 bit) did not work, saying The camera is being used by another program. I searched on the net to solve the problem and the solution that seemed to be working was to remove usb2.0 uvc 1.3m webcam and restart the computer and the webcam will automatically re-install. However, not only did the webcam not re-install automatically, but the webcam is still not working. Things have gotten only worse that now I'm missing the webcam under Imaging Devices. I even tried recovering Windows to the factory state, however, the webcam was still missing. What can I do to restore my usb2.0 uvc 1.3m webcam?

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >