Search Results

Search found 114294 results on 4572 pages for 'one of two'.

Page 57/4572 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• Splitting Servers into Two Groups

  - by Matt Hanson

  At our organization, we're looking at implementing some sort of informal internal policy for server maintenance. What we're looking at doing is completing maintenance on our entire server pool every two months; each month we'll do half of the servers. What I'm trying to figure out is some way to split the servers into the two groups. Our naming convention isn't much to be desired (but getting better) so by name or number doesn't really work. I can easily take a list of all the servers and split them in two, but with new servers are being added constantly, and old ones retired, that list would be a headache to maintain. I'd like to look at any given server and know if it should have its maintenance done this month or next. For example, it would be nice to look at the serial number. If it started with an even number, then it gets maintenance done on even months and vice-versa. This example won't work though as a little over half of the servers are virtual. Any ideas?

  Read the article

• Disaster After Removing Two HDD From LaCie RAID 0 Case

  - by John

  This is the second time this has happened. I own a LaCie IDE RAID 0 Enclosure and the RAID went bad. The system gave me a warning that the data could be read from the RAID but that nothing could be written, and to remove the data ASAP. I did that and erased and reinitialized the RAID. System reported it was fine, no issues. I wrote to the RAID again and the system reported the same issue. So, I removed the drives and tested them individually thinking one must have gone bad. Sure enough, one HDD reported all bad blocks, every single one after the Master Boot Record. I didn't think much about it because of the age of the drives, 5 years old. So, I bought two new drives plugged them in and started up the RAID again. Exactly the same thing happened. All was fine after initializing the RAID and then the next day after powering on the RAID the exact same issue. The HDD sitting in the same position as the first "bad" HDD reported all bad blocks. Obviously, this is an issue with LaCie's bridge board not with the drives. No utility I have used has been able to bring this HDD back to life. I thought I would just copy the MBR from the good drive to the new one using a sector editor but am hesitant. Is it possible the firmware on the HDD has been corrupted by the LaCie bridge board?? What else could be the cause of such an issue? How can I fix this drive?

  Read the article

• MYSQL - Multiple set values in one update statement [migrated]

  - by Maurzank

  MYSQL - MULTIPLE SET VALUES IN ONE UPDATE STATEMENT USING 2 TABLES AS REFERENCE AND STORING VALUES IN ONE OF THOSE TABLES WITH A SPECIFIC LOGIC. Hello people, A problem came up by making an UPDATE. The example issue is as follows: CURRENUSRTABLE +------------+-------+ | ID | STATE | +------------+-------+ | 123 | 3 | | 456 | 3 | | 789 | 3 | +------------+-------+ HISTORYTABLE +------------+------------+-----+ | ID | TRDATE | ACT | +------------+------------+-----+ | 123 | 2013-11-01 | 5 | | 456 | 2013-11-01 | 5 | | 789 | 2013-11-01 | 5 | | 123 | 2013-11-02 | 4 | | 456 | 2013-11-02 | 4 | | 789 | 2013-11-02 | 4 | | 123 | 2013-11-03 | 3 | | 456 | 2013-11-03 | 3 | | 789 | 2013-11-03 | 3 | +------------+------------+-----+ I'm using these variables: @BA=3, @DE=5, @BL=4, What I'm trying to do is an update on CURRENUSRTABLE.STATE using HISTORYTABLE.ACT with the following logic: STATE value will be updated as ACT value, except when STATE value is 4 and ACT is 3, then STATE will be 5 I made this statement: UPDATE CURRENUSRTABLE RIGHT OUTER JOIN HISTORYTABLE ON HISTORYTABLE.ID=CURRENUSRTABLE.ID SET CURRENUSRTABLE.STATE= ( SELECT CASE HISTORYTABLE.ACT WHEN @DE THEN @DE WHEN @BL THEN @BL WHEN @BA THEN CASE CURRENUSRTABLE.STATE WHEN @BL THEN @DE ELSE @BA END END ORDER BY HISTORYTABLE.TRDATE,FIELD(HISTORYTABLE.ACT,@DE,@BL,@BA) ) WHERE HISTORYTABLE.TRDATE BETWEEN '2013-11-01' AND '2013-11-01' I'm intentionally using "RIGHT OUTER JOIN" and "HISTORYTABLE.TRDATE BETWEEN" because I'd like to change the values in CURRENUSRTABLE using a timeframe of more than one day. If I execute this statement many times using only one day (i.e. "BETWEEN '2013-11-01' AND '2013-11-01'" and then "BETWEEN '2013-11-02' AND '2013-11-02'"... etc ) it works perfectly, but if it is executed using the dates "BETWEEN '2013-11-01' AND '2013-11-03'" the results on CURRENUSRTABLE.STATE are 3, which is wrong, it should be 5. I think the problem relies on "CASE CURRENUSRTABLE.STATE" when uses "HISTORYTABLE.TRDATE BETWEEN '2013-11-01' AND '2013-11-03'", because it reads the STATE 9 times which has not been commited yet until the statement ends. Query OK, 9 rows affected (0.00 sec) Rows matched: 9 Changed: 9 Warnings: 0 Maybe the solution is very simple, but unfortunately I've not much practice on MySQL since I've worked with it less than 2 months :) Is there any suggestions to solve this issue? PD: MySQL version is 4.1.22, I know is very old an EOL, unfortunately I have to make these statements on this version. Thanks!

  Read the article

• Two audio streams - headphones and speakers

  - by Sylvester

  What I want (this is probably hard for most to answer, as this is a very unique setup) is to have two different streams (this means audio splitter is not an option, as it will still only be one stream) of audio - one through the headphones and one through the main speakers. I can do the audio rerouting using virtual audio cables, however the problem is this: i cannot get both headphones AND speakers to play even just one stream, let alone two seperate ones. using "split front and back audio into seperate streams is not an option, as the actual MB F_PANEL is faulty (nothing to do with the case front panel, just so you know. that works fine) So, first things first. I need it to recognise the headphones as a seperate audio device so that Virtual Audio Cables will detect it and allow me to route the necessary audio to the headphones only. I also need to be able have sound play through speakers and headphones together what i want to achieve overall, is this: have the ENTIRE computer's sounds picked up by VAC, and stream them to Line1. then have Line1 stream to the headphones. that way whatever's being streamed is heard through the headphones, while the entire system sounds (including those not streamed) are played through speakers.

  Read the article

• how to initialize two logical drives on a HP P400i controller without reboot

  - by John

  What I am trying to do is initialize two logical drives on a HP P400i embedded controller without a reboot of the system here my current Array config: array A (SAS, Unused Space: 0 MB) logicaldrive 1 (17.9 GB, RAID 5, OK) logicaldrive 2 (17.9 GB, RAID 5, OK) logicaldrive 3 (75.9 GB, RAID 5, OK) logicaldrive 4 (25.0 GB, RAID 5, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 72 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 72 GB, OK) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 72 GB, OK) array B (SAS, Unused Space: 0 MB) logicaldrive 5 (99 MB, RAID 0, OK) logicaldrive 6 (68.2 GB, RAID 0, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 72 GB, OK) windows 2003 machine running the HpCISs2.sys driver version 6.20.0.32 . I have the ACU and ACU CLI tools installed version 8.28.13.0, P400i firmware version 2.74 . Now what I'd like to do is removes the physical drive 1I:1:4 and delete the two logical drives in array B. then insert a new drive in to bay 4 that contains two new logical drives and have them show up in array B again. So far after I remove the drive and delete the failed logical drives, I insert the new drive and run HPacucli rescan. I get the new drive to show up as unassinged physical drive but I cant figure out now to "for lack of a better word" mount the 2 logical drives on the new unassinged disk. If I reboot the system the array controller picks up the new fourth drive and creates Array B with the drives without problem but I'd really like to not have to reboot the server. Any ideas?

  Read the article

• Two DHCP servers on the same network

  - by CesarGon

  We are setting up a routing link between the Windows Server 2008 networks of two different buildings in my organisation. Each network uses a different IP addressing scheme (one uses public addresses, the other one uses private), but the goal is having a single Windows Server domain across the gap between the buildings. The link is provided by a 100-Mbps point-to-point line. I have always understood that you should not have more than one DHCP server on a network. However, we are planning to put a domain controller on each building, and each domain controller will be a DNS server and a DHCP server as well. The intention is that a machine booting up in building A gets its IP address from the DHCP server closer to it, in building A, while a machine booting up in building B gets an address from the DHCP server in building B. Since the two buildings will be linked and the network will be only one, will this work? How can I avoid that a machine booting up in building A gets an address from the DHCP server in building B (or vice versa)? Thanks.

  Read the article

• Two DHCP servers on the same network

  - by CesarGon

  We are setting up a routing link between the Windows Server 2008 networks of two different buildings in my organisation. Each network uses a different IP addressing scheme (one uses public addresses, the other one uses private), but the goal is having a single Windows Server domain across the gap between the buildings. The link is provided by a 100-Mbps point-to-point line. I have always understood that you should not have more than one DHCP server on a network. However, we are planning to put a domain controller on each building, and each domain controller will be a DNS server and a DHCP server as well. The intention is that a machine booting up in building A gets its IP address from the DHCP server closer to it, in building A, while a machine booting up in building B gets an address from the DHCP server in building B. Since the two buildings will be linked and the network will be only one, will this work? How can I avoid that a machine booting up in building A gets an address from the DHCP server in building B (or vice versa)? Thanks.

  Read the article

• How to sync two computers using new MobileMe calendar

  - by CesarGon

  I have been using MobileMe for over a year with success. I use it to sync my Outlook calendars in my work and home computers, using Windows 7 and Outlook 2007. The main Outlook calendar folder in my work computer is replicated to MobileMe as "Work", and synced to my home computer, and the main calendar folder in my home computer is replicated to MobileMe as "Home", and synced to my work computer. This means that I can see both "Work" and "Home" calendars from both computers (as well as from the web interface through me.com), which is very convenient. Yesterday I migrated to the new MobileMe calendar, accepting the suggestion that popped up on the me.com website. After the migration, the MobileMe control panel on each of Windows computers asked me to re-configure my calendar setup, and everything fell apart. The "Home" and "Work" calendar folders in Outlook are now ignored by MobileMe, and new ones named "Home in MobileMe" and "Work in MobileMe" have been created, and placed in a separate Outlook data file rather than the default. This means that now: I now have four folders, two of which are not replicated to MobileMe The two folders that are not replicated reside on a separate data file, so alarms and reminders don't work; they're basically useless to me as calendar folders In addition, the button in the MobileMe Control Panel that used to let me specify what MobileMe folder should be synced against the default Outlook folder has gone. MobileMe is now too smart. Do you have any idea how to undo this mess and go back to a situation where I have two folders, as described in the top paragraph, which keep synced? I don't want an extra data file. Thanks.

  Read the article

• Hardware needed to route between two networks over wireless

  - by AptDweller

  I recently rented an apartment about 100 yards from my brother's house. I have line of sight to his house and can pick up his home AP signal with one of my two laptops if I go out on my balcony (facing his house) or put the laptop by the window. The other laptop will sometimes see the SSID broadcast, but fails to connect, drops, etc. We would like to set up a persistent wireless connection between our homes. We would prefer each network be logically segmented as independent networks, but he will share his internet connection. I've got a bunch of tv shows saved to a NAS by my TiVO that I'd like to make available to him across the wireless link. My brother strongly prefers to not mess with his WAP at all. His network is running fine and is afraid to mess it up. I guess you could say he is "technologically declined". If we can get a reliable 11Mbps connection we will be satisfied. What hardware do I need to make this work? I was thinking a router with two wireless interfaces (external antennas) a wired interface, and a directional antenna mounted on my balcony facing his house. Can anyone recommend hardware to make this happen? Cheaper is better. I'll only be living in the area a year or two. I do have an old satellite TV antenna if that can be used to direct the signal.

  Read the article

• Utility to LOGICALLY compare two xml files?

  - by Matthew

  Right now we are attempting to build golden configurations for our environment. One piece of software that we use relies on large XML files to contain the bulk of its configuration. We want tot ake our lab environment, catalog it as our "golden configuration" and then be able to audit against that configuration in the future. Since diff is bytewise comparison and NOT logical comparison, we can't use it to compare files in this case (XML is unordered, so it won't work). What I am looking for is something that can parse the two XML files, and compare them element by element. So far we have yet to find any utilities that can do this. OS doesn't matter, I can do it on anything where it will work. The preference is something off the shelf. Any ideas? Edit: One issue we have run into is one vendor's config files will occasionally mention the same element several times, each time with different attributes. Whatever diff utility we use would need to be able to identify either the set of attributes or identify them all as part of one element. Tall order :)

  Read the article

• Sporadic email delivery to one user

  - by minamhere

  I have a user that occasionally does not receive emails from outside our organization. It does not seem to matter whether the other person is replying to an initial email or sending a new message. I have checked the Exchange System Manager and there is no record of the sender at all during this time period. No record of the message getting captured by the spam software (GFI Mail Essentials). The sender does not receive an NDR or any other indication that the message didn't arrive. It seems to me that these messages are not even getting to our servers at all. But, this is only impacting one user(that I am aware of) and not all the time. Some messages get through without any problem, others just disappear. The senders are not related at all. One is in another country, one uses AOL, one uses a corporate Exchange server locally. I can't seem to find a pattern. Where else can I look to try to figure out where these messages are going/getting captured? Are there additional logs that I can enable either within GFI or Exchange that might shed some light on this? Thanks. We are using Exchange 2003 on Server 2003. Desktop client is Outlook 2003 on Windows XP Pro.

  Read the article

• Copy files from sub directories into one directory.

  - by Derek Organ

  Ok I have a bunch of files in this file structure format. /backup/daily/database1/database1-2011-01-01.sql /backup/daily/database1/database1-2011-01-02.sql /backup/daily/database1/database1-2011-01-03.sql /backup/daily/database1/database1-2011-01-04.sql /backup/daily/database1/database1-2011-01-05.sql /backup/daily/database1/database1-2011-01-06.sql /backup/daily/database1/database1-2011-01-07.sql /backup/daily/anotherdb/anotherdb-2011-01-01.sql /backup/daily/anotherdb/anotherdb-2011-01-02.sql /backup/daily/anotherdb/anotherdb-2011-01-03.sql /backup/daily/anotherdb/anotherdb-2011-01-04.sql /backup/daily/anotherdb/anotherdb-2011-01-05.sql /backup/daily/anotherdb/anotherdb-2011-01-06.sql /backup/daily/anotherdb/anotherdb-2011-01-07.sql /backup/daily/stuff/stuff-2011-01-01.sql /backup/daily/stuff/stuff-2011-01-02.sql /backup/daily/stuff/stuff-2011-01-03.sql /backup/daily/stuff/stuff-2011-01-04.sql /backup/daily/stuff/stuff-2011-01-05.sql /backup/daily/stuff/stuff-2011-01-06.sql /backup/daily/stuff/stuff-2011-01-07.sql And there are lots lots more. ultimately I want to import all the 2011-01-07.sql files into my mysql database. This works for one mysql -u root -ppassword < /backup/daily/database1/database1-2011-01-07.sql That will nicely restore that database from this backupfile. I want to run a process where it does this for all databases. So my plan is to first cp all 2011-01-07 sql files into a tmp dir e.g. cp /backup/daily/*/*2011-01-07*.sql /tmp/all The command above unfortunately isn't working I get an error: cp: cannot stat ..... No such file or directory So can you guys help me out with this. For bonus points if you can tell me how to do the next step which is import all databases in one command doing one at a time that would be great too. I really want to do these in two separate steps because I need to delete a few sql files manually from the tmp dir before I run the restore command. So I need: 1) command to copy all 2011-01-07 sql files to a tmp dir 2) command to import all those files in that dir into mysql I know its possible to do in one but for lots of reasons I really would prefer to do it in two steps.

  Read the article

• Two hosts on same subnet can't see each other

  - by Joey Hewitt

  I've got two routers with two separate public IP addresses on the same subnet, but I can't get them to talk to each other. Both are connected to the internet (ISP-provided gateway) via Ethernet ports provided by the landlord, but I don't have access to or knowledge of how those are physically connected or the protocols used to get back to the ISP. I can ping either from the outside, but they can't ping each other. Traceroutes in and out look the same, and they receive the same gateway over DHCP. I can ping other IPs on the subnet, so I assume this is not any sort of intentional isolation for security/privacy. Since I'm in a setup where my landlord provides internet and we don't have contact with the ISP, I can't really ask the ISP for help (doubt the landlord would know much either.) The situation is similar to the diagram at this question, but instead of the two servers, there's another router coming off the (presumed) switch, and I don't have access to the switch. I've tried giving them static routes to each other with the ISP internet gateway as the gateway, but that's not working. One is a Linksys WRT54GL running DD-WRT, the other is a Netgear WGR614v7, although I could get something more capable if necessary. I'd like to keep them each connected directly to the ISP on their WAN ports, but I can have an ethernet cable between them if necessary - I'm wondering if there's a way without that, and if there isn't, I'd appreciate advice on how to get that working. Sorry this is so nitpicky; there are reasons for all the constraints, but they don't apply to the real question, so I left them out. ;) Thank you!

  Read the article

• Creating a bootable USB drive from a distro split over two DVD ISOs

  - by Kev

  I am searching and not finding the right way to do this. Please note, I don't think I'm trying for anything strange here. I just want to make a bootable USB stick of a single OS that happens to be larger than one DVD and happens to be larger than FAT32 will allow for in a single file. On our slow connection I spent a long time downloading CentOS 5.9's two DVD ISOs: CentOS-5.9-x86_64-bin-DVD-1of2.iso (4.4 GB) CentOS-5.9-x86_64-bin-DVD-2of2.iso (718 MB) I have a USB stick that I want to somehow get these two ISOs on. Since the first one is 4.4 GB, I can't use ISO2USB because it insists on FAT32. I cannot find an alternative that lets you specify more than one ISO image--of the same distro, I'm not trying for some fancy multi-boot thing--to put on the same stick. I guess I should have downloaded the CD ISOs, but I thought I was "saving time" because then I wouldn't have as many files to run through the md5 checker. There's no IMG file of the whole thing (only a net install version, which I don't want--I want to pre-download everything) otherwise I would've gone for that. So, given that I have these two DVD ISOs, how can I get them on a stick that will boot and make use of both of them properly to install CentOS somewhere? Again, I don't think this is anything out of the ordinary, yet I can't find software/docs that seem to support this. Am I stuck re-downloading everything in CD-sized ISOs just to do this? I found this, but it doesn't run on Windows. I am using Windows to prepare the stick.

  Read the article

• Extending a home wireless network using two routers running tomato

  - by jalperin

  I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

  Read the article

• Problem mirroring two monitors with different resolution

  - by quad

  Hello I am trying to put two monitors in mirror mode (Windows 7 Professional) with Ultramon 3.1.0. The two monitors: Main monitor: 24" Asus. 1680x1050 resolution (16/10). Secondary monitor: 19" LG. 1280x1024 resolution. The graphic card is a Nvidia GeForce 8600 GT. I have installed the Ultramon 3.1.0 and I have created a mirror, with the "stretch mirror image to fill monitor" and the "disable video overlays and 3D acceleration". When I start the mirroring, there are two zones in the lateral edges that are not displayed in the second monitor. I think this is because the width of the main monitor is 1680 px. and the width of the secondary monitor is 1280 px., but I have indicated "stretch mirror image to fill monitor" in the options. The same occurs in the top and the bottom edges, but the diference is minimal (1050 vs 1024 pixels). I want the same image (distortioned in the secondary monitor if is neccesary), but I don't know what is failing. Someone can help me, please? I have read Mirrored monitors of different resolution. Cloned screen on monitors with different resolutions

  Read the article

• Run 3 monitors on two different video cards?

  - by hullot

  Can I run 3 monitors on two different video cards? I have an ATI and Nvidia brand card. The ATI has 2 HDMI connections. They both work. Both cards are also picked up in Windows, one being the ATI and the other one as the Nvidia, but it says VGA Controller, although the card only takes 2 DVi. So, one DVI cable goes into that Nvidia card. 3 Monitors, but only 2 the HDMI ones from the ATI pick up, not the third one which is connected to the Nvidia via DVI. How can I run three monitors then? I suppose I can't install both drivers, so I'm unsure what to do. Is this possible? I just want the Nvidia card to power the third screen, no gaming on it, nothing. Also the ATI is picked up as primary card as well, so no hurdle there. EDIT: Hm, just installed the Nvidia drivers and it picked up the third screen no problem. Hope there aren't any major conflicts. Will post this as an answer as correct when I'm able. Can't as a new user.

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• Excel Conditional Formatting Multiple Data Bars and Data Icons in one cell

  - by wbeard52

  I am using Excel 2007 on a windows machine. I am attempting to place one data bar and one data icon into a cell under the conditional formatting. The issue is that I don't really want to have data icons or data bars for cells that have dates in the future and I only want to have data icons for dates in the at least one month in the past. This is what I have: This is what I want: I am using the EOMONTH function to determine the last day of the month for the conditional formatting calculations. For the data bar the formula is =EOMONTH(Now(), 4) and =EOMONTH(Now(), -1). The data icons formulas are =EOMONTH(Now(), -1) and =EOMONTH(Now(), -2) Is there a way in Excel 2007 to get rid of the data icons for all the dates in the future and lose the data bars when the date has past. Thanks

  Read the article

• Multiple VLAN on one switch port

  - by Macropus

  I have a HP ProCurve 1810G-8 which I currently use as a normal switch between 3 servers and a firewall. 2 of the servers are ESXi hosts, and one is a Nexentastor box with 2 iSCSI target LUNs. As the iSCSI traffic is on the same LAN as all other traffic, I would like to switch this to use a SAN for iSCSI traffic and the LAN for all other traffic. The Nexentastor box only has 2 NICs, and as such, with a physical arrangement, I presume that one must be plugged into the SAN VLAN and one on the LAN VLAN ports of the switch. Is there a way to have multiple VLANs over the same port? e.g. the Nexentsator box has 2 NICs, both plugged into the switch, both ports with access to both of the VLANs?

  Read the article

• Close all Mac Terminal windows, but the one running a script

  - by Greg Brown

  I am trying to create a shell script that runs a python simulation programing in 4 terminal windows. I have the script that launches the program four times in four separate terminal windows(total of 5 windows, 4 for the python programs, and one to control the other terminal windows). I want to now create a script that I can run in the control terminal window that closes and kills the programs of the other four terminal windows, but still have the control one open. What I have so far is something like this #!/bin/sh osascript -e 'tell app "Terminal" do script "killall python" end tell' osascript -e 'tell app "Terminal" to quit' osascript -e 'tell app "Terminal" to open' The problem is that the last line doesn't work because it closes all the windows including the one the script is executing in. I am not really familiar with shell or apple script so any help would be welcomed. I posted on Stack, but I think this might be a better place for an automation type question. Thanks

  Read the article

• Three displays, one video card and no eyefinity mode

  - by José F. Romaniello

  I am looking for a video card to run three monitors, it could be hdmi, dvi or vga. I want the three monitors to show an extended desktop but as three different desktops with maybe different resolutions, so when i maximize something it should be maximized only in one monitor. The information seems confusing, I think eyefinity tricks the OS to make it looks like one big display. I am sure I dont want this. So my question(s) is, is there a video card in the market that support 3 displays without eyefinity? Or can I use an eyefinity enabled card ( with one active display port) to run three monitors and disable eyefinity from the driver settings or something?

  Read the article

• usb vs firewire for connecting two RAID 0 disks

  - by Arne

  I have a 2TB and a 4TB RAID 0 external drives (both have two physical hard drives in them). Both have a FW800, FW400, and USB port. My MacBook Pro has one FW800 port and two USB ports. I want to copy data from the 4TB drive to the 2TB drive. Is it better to A - connect both directly to the laptop, one with USB and one with FW800 or B - connect the 4TB drive to laptop with FW800 and the 2TB drive to the 4TB drive using a FW400 cable? Anyone have problems daisy-chaining RAID 0 disks using FW? Thanks!

  Read the article

• yum / rpm / make | When to use which one

  - by Saif Bechan

  I am new to Linux and am running CentOs. When I want to update or install certain software I came across three ways. Sometimes it's: yum install program rpm -i program.rpm wget program.tar.gz unpack ./configure make make install That last one is a real pain, esp when you come from windows where a program install is usually one click and then a nice guide. Now can someone please explain to me: Why are there so many different ways to do this? Which one do you recommend to use and why? Are there any other ways for installing programs?

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >