Search Results

Search found 7606 results on 305 pages for 'raam dev'.

Page 57/305 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Shrink NTFS Windows 7 Partition with GParted

  - by user15961

  I am running a dual-boot system with Windows 7 and Ubuntu 10.10. Initially I allocated about 20GB for my Ubuntu partition; however, I quickly ran out of that space and am now looking to expand my partition. Currently my NTFS partition (450GB) has about 130GB of free space. I tried using GParted to shrink the partition but encountered the following error. I booted into windows so I could run chkdsk but the countdown freezes at 1 upon reboot. I tried multiple methods to resolve that issue but nothing seems to work. Finally I gave up, and now I just want to know what is the best way for me to force GParted to shrink the partition regardless of the errors. I don't really have anything important and I don't mind risking the data. I just don't want to wipe the entire NTFS partition because I don't have a Windows install CD and might require Windows later on for some programs. I tried using sudo ntfsresize but that spews out the same error as GParted... Any ideas? Check and repair file system (ntfs) on /dev/sda2 00:00:09 ( ERROR ) calibrate /dev/sda2 00:00:00 ( SUCCESS ) path: /dev/sda2 start: 36944325 end: 976771119 size: 939826795 (448.14 GiB) check file system on /dev/sda2 for errors and (if possible) fix them 00:00:09 ( ERROR ) ntfsresize -P -i -f -v /dev/sda2 ntfsresize v2.0.0 (libntfs 10:0:0) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 481191318016 bytes (481192 MB) Current device size: 481191319040 bytes (481192 MB) Checking for bad sectors ... Checking filesystem consistency ... Cluster 63468 is referenced multiple times! Cluster 63469 is referenced multiple times! Cluster 63465 is referenced multiple times! Cluster 63466 is referenced multiple times! Cluster 63467 is referenced multiple times! Cluster 165621 is referenced multiple times! Cluster 165622 is referenced multiple times! Cluster 165623 is referenced multiple times! Cluster 165624 is referenced multiple times! ERROR: Filesystem check failed! ERROR: 9 clusters are referenced multiply times. NTFS is inconsistent. Run chkdsk /f on Windows then reboot it TWICE! The usage of the /f parameter is very IMPORTANT! No modification was and will be made to NTFS by this software until it gets repaired.

  Read the article

• Accessing second hard drive

  - by Jonathan

  Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

  Read the article

• Ubuntu 12.04 + Wifi not working

  - by user171154

  i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

  Read the article

• Nginx Subdomain Problem

  - by user292299

  i can't access my subdomain on localhost. my localdomain is localhost.dev and it's work.but i want to auto subdomain for php script (username.localhost.dev) i try this server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name localhost.dev ***.localhost.dev**; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } it's not working.i change server_name for testing server_name localhost.dev asd.localhost.dev; i can't access asd.localhost.dev and i try this double server{} section # You may add here your # server { # ... # } # statements for each of your virtual hosts to this file ## # You should look at the following URL's in order to grasp a solid understanding # of Nginx configuration files in order to fully unleash the power of Nginx. # http://wiki.nginx.org/Pitfalls # http://wiki.nginx.org/QuickStart # http://wiki.nginx.org/Configuration # # Generally, you will want to move this file somewhere, and start with a clean # file but keep this around for reference. Or just disable in sites-enabled. # # Please see /usr/share/doc/nginx-doc/examples/ for more detailed examples. ## server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name localhost.dev; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } ############################### server { access_log /var/www/access.log; error_log /var/www/error.log; root /var/www; index index.php index.html index.htm; # Make site accessible from http://localhost/ server_name asd.localhost.dev; location / { # First attempt to serve request as file, then # as directory, then fall back to displaying a 404. try_files $uri $uri/ /index.html; # Uncomment to enable naxsi on this location # include /etc/nginx/naxsi.rules } location /f2/public/ { try_files $uri $uri/ /f2/public/index.php?$args; } location /doc/ { alias /usr/share/doc/; autoindex on; allow 127.0.0.1; allow ::1; deny all; } # Only for nginx-naxsi used with nginx-naxsi-ui : process denied requests #location /RequestDenied { # proxy_pass http://127.0.0.1:8080; #} #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/html; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { # fastcgi_split_path_info ^(.+\.php)(/.+)$; # # NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini # # # With php5-cgi alone: # fastcgi_pass 127.0.0.1:9000; # # With php5-fpm: # fastcgi_pass unix:/var/run/php5-fpm.sock; # fastcgi_index index.php; # include fastcgi_params; include /etc/nginx/fastcgi_params; try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # root html; # index index.html index.htm; # # location / { # try_files $uri $uri/ =404; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # # root html; # index index.html index.htm; # # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # # ssl_session_timeout 5m; # # ssl_protocols SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP; # ssl_prefer_server_ciphers on; # # location / { # try_files $uri $uri/ =404; # } #} i can't success

  Read the article

• How to save during real-time collaboration

  - by dev.e.loper

  I want multiple users to edit same document. Problem I'm facing is when a new user joins, he might see an outdated document. How do I make sure that new users get most recent changes? Some solutions I thought of: Save on every change. I don't like this solution because it will slow things down on UI and put load on db. When new user joins, trigger save on all other clients. After other clients saved, load document. With this there can be inconsistency still. Any other suggestions would be helpful.

  Read the article

• Cloning a dual boot system from HDD to SSD

  - by Alex

  I'm planning on replacing my laptop's HDD with a 256GB SSD, but I have a dual-boot (12.04 and Windows 7) setup and I'd like to be able to directly migrate Ubuntu over without having to reinstall and lose all of my settings. GParted reports the following partition setup on my HDD. I am, of course, able to modify it if necessary. /dev/sda1 (NTFS) 66.92 out of 200.00 MB used I'm honestly not sure what this partition is for. Maybe for Windows 7 system files? I'm hesitant to mess with it. (edit; it turns out it is a partition for Windows recovery files in the event of OS corruption, so I don't want to remove it. Plus it also appears to be a major pain to remove anyways) /dev/sda2 (NTFS) 116.35 out of 339.06 GB used (boot) This partition is the C:/ drive on my Windows installation. I don't use it on my Ubuntu installation, except it is the boot partition and thus has grub on it. /dev/sda4 (extended) > /dev/sda5 (ext4) 14.49 out of 91.34 GB used > /dev/sda6 (linux-swap) 5.92 GB These are my Ubuntu partitions. /sda5 contains my documents and all of the files I use on Ubuntu, and (as far as I know) the system files for Ubuntu itself (it's the partition I created when prompted by the Live-DVD installer). /sda6 is, of course, the swap partition which I only need for hibernation (6GB of RAM). /dev/sda3 (NTFS) 9.89 out of 14.75 GB used This is an annoying partition that Lenovo created to store some drivers and files that I might need later on. For example, it allows me to use OneKeyRecovery for a quick factory recovery if absolutely necessary, not sure if that'll work on an SSD. It also contains not-so-important files for bloatware installation. In total, my HDD only has about 150GB of files on it so it should fit comfortably on the SSD. The problem is, I want to exactly migrate my files, partitions, OSes, MBR, etc. from my HDD to my SSD and I'm not quite sure how to do this. I've seen CloneZilla referenced before, but I'm not all too experienced and the documentation for it quite frankly seems a bit like a foreign language to me. So, put simply, is there any way I can exactly clone this HDD to an SSD without a massive headache? Also, if it matters, I'll probably be using an external hard drive case (as recommended in online tutorials) to externally attach the SSD to my laptop during the cloning process due to the lack of two hard drive slots in the machine.

  Read the article

• unknown monitor problem

  - by dev

  I'm using HCL P30 laptop with 1280x800 60 Hz default resolution.But none of the ubuntu versions are capable of detecting my monitor.In 11.04 the resolution is 1024x768 61 Hz. When I run xrandr command in terminal,it returns xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600 61.0 640x480 60.0 So,how can I set it to 1280x800 60 Hz. plz reply soon. thnx in advance.

  Read the article

• how to limit upload bandwidth per user in linux?

  - by Gihan Lasita

  Can anyone provide the tc command to limit upload bandwidth per user in Debian Lenny? I found that to mark packets per user with iptables I can use the following command iptables -t mangle -A OUTPUT -p tcp -m owner --uid-owner testuser -j MARK --set-mark 500 but I have no idea how to use tc update by running following commands, i managed to limit testuser upload bandwidth to 10Mbit iptables -t mangle -N HTB_OUT iptables -t mangle -I POSTROUTING -j HTB_OUT iptables -t mangle -A HTB_OUT -j MARK --set-mark 30 iptables -t mangle -A HTB_OUT -m owner --uid-owner testuser -j MARK --set-mark 10 tc qdisc replace dev eth0 root handle 1: htb default 30 tc class replace dev eth0 parent 1: classid 1:1 htb rate 10Mbit burst 5k tc class replace dev eth0 parent 1:1 classid 1:10 htb rate 10Mbit ceil 10Mbit tc qdisc replace dev eth0 parent 1:10 handle 10: sfq perturb 10 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 10 fw flowid 1:10 now the problem is, i do not want to limit testuser's FTP bandwidth but by running above commands FTP speed also limited to 10Mbit. Regards

  Read the article

• Pulling changes from master to my work branch?

  - by Utkarsh Sinha

  There's two of us working on something. We're using this branch structure master dev-A dev-B We both work on separate branches (dev-A,B) and whenever we're done - we promote our changes to master. But the drawback of this is we can't get changes the other developer makes. Everything exists in the master tree - but we can't get the latest updates the other developer made. Is there a way to resolve this or should we change our branch structure (per feature?)?

  Read the article

• DVD-drive detected by BIOS and UEFI but not by Ubuntu 12.04

  - by user97591

  I have build a new tower containing; Asrock Z77 extreme4 (motherboard) Core i7 (processor) Hitachi LGE-DMGH 12 L (B) GH15F SATA (SATA DVD-drive) Problem is; BIOS and UEFI has no problems detecting the DVD-drive but it is not detected by Ubuntu 12.04. It is not present in /etc/fstab or /etc/mtab. Below is the contents of fstab and mtab. Thanks for all your help. fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=f007bc60-da4c-4f36-99a7-77083c5f3654 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=5d59949c-aed9-442a-877d-5abf1ccaadc3 none swap sw 0 0 mtab: /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/tom/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=tom 0 0

  Read the article

• How can I set up FakeRAID/SoftRAID using mdadm without losing data?

  - by Danatela

  There is RAID0 of 2 drives connected through Silicon Image 3132 SATA SoftRAID controller. Under Windows it was partitioned as one dynamic GPT-disk having 4 TB NTFS volume. There is a lot of music and movies on the drive. I'm trying to get him to be seen under Ubuntu as a single disk, not as 2 by 2 terabytes. I tried to read it through dmraid, had no success, it is not displayed in /dev/mapper. Also tried to configure the kernel, but did not find anything suspicious, the driver for my controller was on. There is also a driver from the manufacturer, but it is only available for RHEL and SLES. Here it's reported that SoftRAID is supported by the kernel, but apparently not completely. If I thrust drives in the AMD controller, built into the motherboard, the drive is seen as a single, but the data is lost. I know about mdadm that it is able to ditch all the information on the disks. So, is it possible to somehow create an array without actually recording information on used drives and to make the system correctly identify sections on it later? Information about the array: /dev/sdf - Disk 0 /dev/sdg - Disk 1 Array type: Stripe Block Size: 64KB Also, a device /dev/md1 is created using command mknod /dev/md1 b 9 1

  Read the article

• I cant see my windows drive in ubuntu

  - by Shardul Dhande

  I'm n00ber than any n00b you ever seen, so bear with me... I just downloaded wubi and installed ubuntu 12.10 along with Windows 7 on the same HDD. Linux works fine, but doesnt show files from drive C (on which it is installed). I really need C as it contains all my files. I did df -h in the terminal. It does show the drive. /dev/sda2 577G 220G 358G 38% /host Now I tried to mount the drive sudo mount /dev/sda2 and got the response mount: /dev/sda2 already mounted or /host busy mount: according to mtab, /dev/sda2 is already mounted on /host I dont know what that means. The drive doesnt show up in HOME FOLDER. What am i supposed to do now?

  Read the article

• How to replace GRUB with BURG without overwriting MBR?

  - by StepTNT

  I'd like to install BURG but I don't want it to overwrite my MBR. That's because I've got two bootloaders in my system : Default Windows 7 in MBR Grub in /dev/sda2 With the first power button, it will boot into Windows and with the second button it boots from /dev/sda2, loading Grub and then Kubuntu. Now I want to replace GRUB with BURG. I've installed Burg with burg-install /dev/sda2 --force because I don't want my MBR to be overwritten (pressing the first power button MUST load Windows and avoid showing any sign of Linux). Setup was completed without errors, If I open burg-manager it loads my settings, allowing me to change them and to test everything with burg-emu, so I've changed my settings but the second power button still loads GRUB (Even a different version from the default Kubuntu one). How can I replace GRUB that's on /dev/sda2 with BURG and without overwriting MBR?

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system?

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• Ubuntu partitions on Dell XPS13

  - by Francois

  I bought a Dell XPS13 with ubuntu 12.04 pre-installed. I want to reformat and repartition the machine but as I'm far from being a linux guru, I'm afraid to erase something important that could have been preinstalled by Dell. On the disk, there are 3 partitions: /dev/sda1 - Ext4 Linux bootable 248GB - witch is the system+user partition I guess, /dev/sda2 - Extended (?) of 8GB - What is this partion about? /dev/sda5 - Linux Swap of 8GB - whitch is for RAM and need to be reconduct (why only 1xRAM and not 2?) Do I have to care about /dev/sda2 ? According to you can I reformat to create a partition for /home whitout losing anything important (except user data of course) ? Thank you for your help

  Read the article

• Ubuntu 10.10 USB drive not showing

  - by Ben

  USB is detecting but not showing the drives or mount details. Nothing there inside my /media folder and /mnt folder. I already enabled automatic mount and give privilege to user also. My sudo fdisk -l shows like: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d3ba7 Device Boot Start End Blocks Id System /dev/sda1 * 1 29637 238053376 83 Linux /dev/sda2 29637 30402 6142977 5 Extended /dev/sda5 29637 30402 6142976 82 Linux swap / Solaris Any idea?

  Read the article

• RHEL raw device (over VMware RDM) performance issues

  - by jifa

  I'm running RHEL 5.3 over vSphere 4.0U1. I configured multiple LUNs on my NetApp (Fibre) storage, and added the RDM on two (Linux) VMs, using the Paravirtual SCSI adapter. One LUN is 100GB in size, successfully mapped to /dev/sdb on both VMs, 5 more are 500MB in size (mapped to /dev/sd{c-g}. I also created one partition per device. I have encountered two issues: First, writing directly to /dev/sdb1 gives me ~50MB/s, while any of the /dev/sd{c-g}1 gives me ~9MB/s. There is no difference in configuration of the LUNs apart from their size. I am wondering what causes this but this is not my main problem, as I would settle for 9 MB/s. I created raw devices using udev pretty straightforwardly: ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N" per device Writing to any of the new raw devices dramatically slows down performance to just over 900KB/s. Can anyone point me in a helpful direction? Thanks in advance, -- jifa

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• GParted tells me my partition has 1.30 GiB used space but I cannot access its contents

  - by reprogrammer

  I've a ext4 partition (/dev/sda7) for my Linux. And, another (/dev/sda5) for keeping my data. When I installing Ubuntu 10.04 LTS, I set the mount point of /dev/sda5 to "/" and that of /dev/sda5 to "/data". GParted tells me that 1.30 GiB out of 70.12 GiB of /dev/sda5 has been used up. But, the mounted directory "/data" is empty. So, it looks like that my data is there but I cannot access it. Besides, when I set the mount point, I didn't check the "format" box. So, it shouldn't have been formatted. How can I check whether the partition has been formatted? How can I recover my files?

  Read the article

• Why won't Kubuntu load my CD?

  - by Visualblocks

  I'm running Kubuntu 12.04.1 LTS and Kubuntu hasn't recognised my CD! Here are the results of a sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000c5a81 Device Boot Start End Blocks Id System /dev/sda1 * 2048 964603903 482300928 83 Linux /dev/sda2 964605950 976771071 6082561 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 964605952 976771071 6082560 82 Linux swap / Solaris How am I meant to view it in say, Dolphin?

  Read the article

• Ubuntu dual boot and grub error 18

  - by srboisvert

  I've attempted to install 9.04 on an older toshiba laptop with a new 300GB drive and am getting the dreaded Grub error 18 that indicates that grub is looking beyond the bios readable area of the HD and failing. I just let ubuntu roll with its default selections when installing and ended up with this: Drive layout /dev/sda1 -ntfs 128GB -boot /dev/sda2 -extended 170GB -lba /dev/sda5 -ntfs 167.59GB /dev/sda6 -ext3 2.33GB /dev/sda7 -linux-swap 172MB I'd like make the system dual bootable without having to reinstall windows (real pain since I would have to go through an obstructionist IT dept). I know I can make windows bootable with a rescue disk and fixmbr but is there something I can do to make it dual bootable using the ubuntu livecd? Alternately, what should I have done at the partition stage of ubuntu installation to avoid this?

  Read the article

• How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

  - by g0lem

  I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

  Read the article

• Resize ntfs system partitions with GParted?

  - by ane

  Trying to resize 2 ntfs system and boot partitions (windows 2003 server) using GParted. Goal: Resize D: (/dev/sda1) to ~850G - this is the boot drive with D:\ntldr, boot.ini, etc. Resize C: (/dev/sda5) to 100G - this is the system drive with C:\windows Tried resizing /dev/sda5 first and got the chkdsk error shown in screenshot #2. (You must run chkdsk /f). Have already run chkdsk /f on C: multiple times with no bad sectors or errors found. Have also run multiple chkdsk /f's on the underlying hard disk multiple times and rebooted way more than a couple times with the same error. How do you force gparted to ignore this error and resize? I found there is --force option to ntfsresize but don't know how to get the GParted ISO live CD to use it. How do you move the unallocated space so an extra ~750G is to the right of /dev/sda1 (D:), and an extra 10G to the right of /dev/sda5 (C:)

  Read the article

• install Ubuntu and remove Windows 7

  - by dani

  I'm using Windows 7 on my laptop (2GB RAM, 250 GB HDD). I want to install Ubuntu and remove Windows 7. I have Partitioned my laptop into 2 partitions: , C Drive - 105 GB and D Drive - 145 GB. I want to install Ubuntu on C drive all my data in D drive, no backup I have already selected the "Try something else option " /dev/sdb /dev/sdb1 ntfs 104855 MB unknown C drive /dev/sdb5 ntfs 145192 MB unknown D drive I need help using the "Try Something Else" Option My course of action: laptop power on bootubuntu nextsomething elsepartition.

  Read the article

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >