Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 57/281 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

• Forward a port with modem (with built-in but disabled router) + a separate router

  - by Youn

  I have a Motorola SBG6580 that is a modem and a wireless router in one. However, the wireless router part was bad so I disabled it and got a separate wireless router. I can go into the configuration pages of both the modem and the router now, and I'm confused as to which device needs to be configured for port-forwarding. I have a raspberry pi that I want to set up as a webserver. Do I configure the router, the modem, or both? Right now, the SBG6580's 1st LAN is connected to the wireless router's WAN, and the internet is working well. Note that the SBG6580 only has 4 ports, and I'm assuming they're LAN,as they are not labeled.

  Read the article

• Recover files in Ubuntu from USB stick

  - by Jon

  I have Ubuntu 11.04 running from a USB stick. I think I ran some updates in terminal and now it has a kernel panic during boot up. Is there a way I can get hold of files I saved when Ubuntu was working? I just managed to watch the booot screen and it looks as if there are some errors saying there is no room to write to disk however my USB stick has 5GB free UPDATE: Here is what I see when I plug the USB stick into Windows

  Read the article

• How to share a USB modem?

  - by allenskd

  Usually I wouldn't have this problem if it was a dsl modem or cable modem but it's really been difficult for me to share this little modem to other computers. Right now I have my laptop connected to a hub, both computers are in the same workgroup and I have "share this computer internet to other computers"... etc. Problem is, I don't know what is currently happening... I'm hoping someone would guide me, I have googled and some people have been successful at sharing the connection but it seems I'm missing something =/ Let me know if you need any details, thanks

  Read the article

• Intel intègrera l'USB 3.0 dans Windows 8 et espère aider l'adoption de masse de cette technologie

  Mise à jour du 09.03.2010 par Katleen Intel intègrera l'USB 3.0 dans Windows 8 et espère aider l'adoption de masse de cette technologie Une information importante vient d'être révèlée à propos du futur système d'exploitation de Microsoft. En effet, Intel a annoncé hier que l'USB 3.0 sera embarqué dans Windows 8. Alors que les technologies qui seront utilisées dans deux ans sont encore inconnues, que penser de cette fonctionnalité ? L'USB 3.0, qui a été présenté pour la première fois au public le 18 septembre 2007 lors de l'Intel Developer Forum, apporte un bus capable de transferts ultra-rapides à hauteur de 4 Gbit/s Pour rappel, l'USB 2.0 plafonne à 480 Mbits/s. ...

  Read the article

• Numpad doesn't work after booting up - forced to reconnect USB keyboard after startup

  - by HorusKol

  I've tried this on two different USB keyboards - both of which work fine on a different computer running Windows XP. For some reason, the numerical keypad doesn't work probably immediately after booting up - neither the numbers work, nor the 'home' commands and so on that you can use with the numlock off. It doesn't make a difference whether I press numlock on or off - the keypad doesn't work correctly no matter what state this is in. However, once I've booted the machine I can disconnect/reconnect the USB connector for the keyboard, and it will work exactly as expected. I'm running Gnome on Ubuntu 10.04. The only other USB devices connected is a mouse - and I've experienced no problems with that. This is a direct connection to the box (not via an external USB hub)

  Read the article

• Access Other Computer via ADSL Modem and Router

  - by Sohail

  My network configuration is like this ISP - Modem - Router - Computer and the same goes for my friend. We want to share large files or to access each other's computer. The Passwords to login to the web page of each other modems are known. I mean, we can access each other Modem Web GUI easily ( because we know the WAN IP of each other modem ). The question is how do i access his or how do he access my computer? Is there any way to do so. Remote desktop connection is not working :( Please help

  Read the article

• Problem in installing Ubuntu 12 using USB

  - by Hitesh Bhatt

  I have a Sony laptop (VPCEH25EN) and i am trying to install Ubuntu 12.04 LTS. I downloaded the iso named "ubuntu-12.04-desktop-amd64.iso". For installing i created a bootable USB using UltraISO. When i booted the USB it hangs and shows " Booting from USB ", I even left it for hours and it didn't moved a bit. When I booted the ISO in Virtual Box, it ran well. I even used other tools to make a bootable USB, then it says " BOOTMNGR missing ". Please help, I am new to Ubuntu and my optical drive is fried. Thanks in advance..

  Read the article

• gigabit network with adsl modem

  - by user51006

  Hi, i would like to build a gigabit network to connect the different computers at my home. I already have an 100Mb adsl router/modem but i have an hard time to find a 1000Mb one, so i came up with the idea of using a normal 1000Mb router or switch to put between the adsl modem and the computers. So i only use the adsl modem to connect to the internet and the gigabit router as dhcp to connect the different computers. But to get to the question. Will the 100Mb adsl router slow down my network? Will data travel like pc gigabit router computer or pc gigabit router adsl router gigabit router pc. My gut says it will go like in the first option but i have seen network hardware do some weird stuff. What do you think?

  Read the article

• USB-live does not save files between sessions

  - by Mads Skjern

  I created a USB-stick with Ubuntu, using the recommended tool "Startup Disk Creator" and the image for Ubuntu 13.10. The very simple interface looks like this: There can't be much to misunderstand in this GUI. I have chosen to create a USB stick with a live version of Ubuntu, which will save files and settings from session to session, on the USB drive, right? Well, it just doesn't save anything. I go in, create a file on Desktop, restart and it's gone. I did the whole procedure three times, i.e. first creating the USB, then testing if I could save. Have I misunderstood something?

  Read the article

• Changing internal home network ip address for connected devices

  - by oshirowanen

  I have a few computers at home. For each of the computers, I can see the internal home network ip address on any given device by typing in ifconfig in the terminal. If the device is connected to the home network via ethernet connection or via the built-in wireless connections in laptops, the internal ip address for each of the devices seems to be 192.168.0.X. However, when I connect one of the devices using an external usb modem wireless adapter, which connects to the home network through wireless, when I check the ip address via ifconfig, for some reason it gets assigned 192.168.42.X instead. Why are the ethernet and build in wireless connections getting 192.168.0.X, but the external usb wireless adapter gets 192.168.42.X? Most importantly, is it possible to force it to get an internal ip address of 192.168.0.X?

  Read the article

• 2wire modem to linksys router

  - by Imajica666

  I want to hook a Linksys router to my 2wire modem/router (2701HG-b) to share my Internet connection. I ran from an open port from the 2wire to the WAN port of the Linksys but it will not work. I did this before with my cable modem to a router to my Linksys router. It worked then but not now. I read I can turn the 2 wire into a modem only but I need the 2wire wireless access also. IPCONFIG /ALL sees the 2wire with IP info as well as DHCP server/gateway. Any ideas?

  Read the article

• HP dv6910 laptop no longer recognizes wireless adapter, dvd drive, and one usb port. What can I do about this?

  - by Joan H.

  In the last 3 weeks, my not even 3 year old HP laptop (vista) just seems to be failing. First, one of the usb ports stopped working. Next, the dvd drive all of a sudden was not recognized as even existing, so it is now useless. And as of today, I no longer seem to have a wireless adapter on my laptop. It doesn't show up in device manager, same as the dvd drive. I can connect to the internet by ethernet cable, but not wirelessly. It worked fine last night; now it doesn't even exist! I have tried a 'hard reset' I read about on HP's forum- no help. I am not sure what else to try. I read about the USB wifi dongle in another response, but I already have maxed our my usb ports even though I have bought a USB hub since the one port failed. Plus, I'd like my laptop to just work like it's supposed to instead of being jerry rigged with usb hubs, external dvd drives, and wifi dongles etc. Any ideas?

  Read the article

• Install Ubuntu in UEFI mode (unable to boot from USB)

  - by Adele

  I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

  Read the article

• USB mouse pointer only moving horizontally on macbook 6.2 with 12.04

  - by Glyn Normington

  After installing Ubuntu 12.04 on a macbook pro 6.2, the touchpad and external USB mouse worked perfectly. After rebooting I can't get either touchpad or external USB mouse to work. Sometimes no mouse pointer is visible, but more often I can only move the mouse pointer horizontally five sixths of the way across the display (from the top left). I have uninstalled mouseemu. xinput list shows the USB mouse. xinput query-state for the USB mouse shows the following: ButtonClass button[1]=up ... button[16]=up ValuatorClass Mode=Relative Proximity=In valuator[0]=480 valuator[1]=2400 valuator[2]=0 valuator[3]=3 and re-issuing this command with the pointer at its right hand extreme displays the same except for: valuator[0]=1679 So the valuator[0] seems to be the x-coordinate of the pointer and the range of motion 480-1679 is indeed about five sixths of the display width (1440). valuator[1] is suspiciously large given the display height is 900. Perhaps this is a side-effect of having previously been using a dual monitor (although booting with that monitor connected does not help). There are other entries listed under xinput list: Virtual core XTEST pointer which seems stuck at position (840,1050). bcm5974 which seems stuck at position (837,6700). Removing the bcm5974 module using rmmod disables the toucpad as expected but does not fix the USB mouse problem. After adding the module back, it is stuck at position (840,1050) instead of (837,6700). /etc/X11/xorg.conf was generated by nvidia-settings and contains: Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" although I don't know how plausible these settings are. Any suggestions?

  Read the article

• Cannot connect to internet with Clearwire modem.

  - by ide

  I'm currently using a Motorola WiMAX modem (CPEi 25725) and cannot connect to the internet. I can connect to the modem at 192.168.15.1 and check its status. It says that it has good/excellent connectivity to the internet and shows all five signal bars. Additionally it has sent and received some WiMAX packets so I believe it is connected to a tower. I'm at a loss for what the problem is. Unplugging the modem, restarting it from software, and restarting my computer (Windows 7) have not helped. Windows still reports that it is not connected to the internet. Alternatively, could this be an ISP issue? I have heard that Clearwire is a not-so-reputable ISP that blocks VoIP, and I was using Skype recently.

  Read the article

• CoovaAP router does not get DHCP settings from modem

  - by Dan Sosedoff

  Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

  Read the article

• Micrsoft fax server not seeing new modem

  - by Tim Meers

  I recently added a new modem (a plain ol consumer grade one) to a fax server thats been up and running for years running on Microsoft Server 2003 fax services. The server currently has two modems, the new one is identical to one of the existing. After installing the new modem it showed up in the Fax Server Manager as a device but was not doing outbound faxes. (The server by default does not handle incoming.) So after a reboot the server no loger sees the modem in the Fax Server Manager but is listed as a device in device manager. I've attempted to restart just the fax service and even the whole box again but to no avail. Any one have any ideas on this one? Or any one with good links to resources for the fax service?

  Read the article

• Cannot connect to internet with Clearwire modem

  - by ide

  I'm currently using a Motorola WiMAX modem (CPEi 25725) and cannot connect to the internet. I can connect to the modem at 192.168.15.1 and check its status. It says that it has good/excellent connectivity to the internet and shows all five signal bars. Additionally it has sent and received some WiMAX packets so I believe it is connected to a tower. I'm at a loss for what the problem is. Unplugging the modem, restarting it from software, and restarting my computer (Windows 7) have not helped. Windows still reports that it is not connected to the internet. Alternatively, could this be an ISP issue? I have heard that Clearwire is a not-so-reputable ISP that blocks VoIP, and I was using Skype recently. EDIT: I called Clear's tech support and apparently their network is having significant problems at the moment. Guess there's nothing an end-user can do about it.

  Read the article

• Unable to boot from new SSD after installing from USB

  - by user73725

  I'm using a new SSD with nothing on it. It's installed via USB drive, and boots from USB as well. While in Ubuntu I can see the SSD and other devices. When I install from the desktop (have tried from the boot screen as well), system restarts. It takes me to the boot screen, select boot from first hard disk, nothing, goes right back to boot screen. When I take the USB out, it hangs on "Verifing DMI." If I boot onto the USB I can see the correct files located in the SSD. I have a basic knowledge of computers. Give me any thing you think would help. No other OS's are loaded. Gigabyte ga-k8n-sli 1GB RAM AMD Athlon 64 x2 dual core 3800+ OCZ SSD Agility 3 120GB

  Read the article

• Illuminated USB keyboard flickers

  - by Axj Member

  Does anyone know where I can download a driver for the VAKOSS TK-487-UK illuminated keyboard to run on Ubuntu? Or at least how to control the USB port so that it stops flickering on and off. The USB port works fine but the Keyboard is not recognized by Ubuntu... Already read the post on youtube and script but did not work either...tried changing USB ports, rebooting, etc. This has been going on for a week. The keyboard gets its power from the USB port. http://answers.yahoo.com/question/index?qid=20120128105854AAjgmgn

  Read the article

• installing application packages on ubuntu usb

  - by mazel

  I'm new to ubuntu. I downloaded the newest version on a usb stick then I booted my PC with the usb. upon trying out ubuntu I tried installing additional packages/applications, which worked fine. BUT when I then after tried using my ubuntu usb, the new installed apps were not there! if I get that right, ubuntu would only install new packages to the actual PC I'm using it on. not within ubuntu itself!? is there a way that I can install new applications to my ubuntu usb and it should stay within ubuntu so I can use it for other pc's which don't have an internet connection necessary to update/install packages ? thanks so much

  Read the article

• Grub rescue doesn't allow me to boot from LIVE CD/USB

  - by Thameem

  I used to have Windows Vista & Ubuntu 12.04 on dual boot. Accidentally, I deleted the Linux partition and landed on Grub rescue on the next boot. The tricky thing for me here is I have been trying to boot through LIVE CD/USB of the ubunutu version, other linux versions but in vain. What happens is, it appears as if it reads the CD/DVD drive or the USB flashes for a while when trying to boot through LIVE versions but the Grub rescue appears after a while. The only option I could think here is to remove the hard disk and connect to the other laptop I have through USB and reinstall a fresh OS. Please suggest me a way to boot through the DVD/USB again. My laptop is Sony VAIO CR32 series.Thanks.

  Read the article

• No upgrade option when booting from USB (12.04)

  - by Ramzi Njeim

  I am trying to upgrade my ubuntu 11.10, i know that it is better to upgrade using a live cd/usb, i booted from the live usb, followed the instructions as usual, but only found three options: Cleen install Install alongside your other operating systems Other The upgrade choice was missing. I even tried installing it after running ubuntu 12.04 from usb, and ended up with the same result. I have a dual boot Ubuntu 11.10 and Windows 7, i think it is only seeing the windows 7 and missing the ubuntu 11.10 partition. Any help ?

  Read the article

• Cannot boot from USB wtih ubuntu 13.10

  - by arunkant

  I downloaded ubuntu 13.10 amd64 iso and used all of following methods to make a install media. UNetBootin Universal USB installer (from windows) But I cannot boot from USB pen drive. Some time it just drop me in grub menu of previously installed ubuntu 13.04. Sometime it show a message "Could not open //fallback.efi: 14 ..." for a moment and then just stays there(blank screen). How to boot from USB pen drive?

  Read the article

• Is it possible/practical to install and run Linux on a USB flash drive?

  - by Graeme Donaldson

  I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

  Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >